Amd raedon 7670m çalışmıyor

[Acracotoxin]

herkese iyi günler. Bilgisayarımda amd 7670m(2gb) ve 7660g(512mb) iki ekran kartı mevcut fakat ne yaparsam yapayım 7670m i kullanamıyorum driverlerini güncelledim fakat olmadı bilenler lütfen yardım etsin.

[if]

Kod Seç Genişlet

lspci
lsmod
dpkg -l | grep fglrx çıktılarını buraya kod etiketi içinde geçin.

[Acracotoxin]

lspci

Kod Seç Genişlet

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7660G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

lsmod

Kod Seç Genişlet

Module                  Size  Used by
rfcomm                 69160  8
bnep                   19624  2
binfmt_misc            17468  1
uvcvideo               80885  0
videobuf2_vmalloc      13216  1 uvcvideo
videobuf2_memops       13362  1 videobuf2_vmalloc
videobuf2_core         40664  1 uvcvideo
kvm_amd                59987  0
hid_generic            12548  0
videodev              134688  2 uvcvideo,videobuf2_core
kvm                   451511  1 kvm_amd
rts5139               335409  0
fglrx                8085343  179
btusb                  32412  0
bluetooth             395423  22 bnep,btusb,rfcomm
crct10dif_pclmul       14289  0
crc32_pclmul           13113  0
usbhid                 52570  0
ghash_clmulni_intel    13216  0
hid                   106148  3 hid_generic,usbhid
lib80211_crypt_tkip    17619  0
aesni_intel            55624  0
wl                   4207846  0
aes_x86_64             17131  1 aesni_intel
lrw                    13286  1 aesni_intel
gf128mul               14951  1 lrw
snd_hda_codec_realtek    61438  1
snd_hda_codec_hdmi     46207  1
snd_hda_intel          52355  5
snd_hda_codec         192906  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
glue_helper            13990  1 aesni_intel
ablk_helper            13597  1 aesni_intel
cryptd                 20359  3 ghash_clmulni_intel,aesni_intel,ablk_helper
nls_iso8859_1          12713  1
lib80211               14381  2 wl,lib80211_crypt_tkip
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30144  1 snd_seq_midi
cfg80211              484040  1 wl
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
joydev                 17381  0
serio_raw              13462  0
k10temp                13126  0
i2c_piix4              22155  0
snd_timer              29482  2 snd_pcm,snd_seq
snd                    69238  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore              12680  1 snd
ideapad_laptop         18216  0
wmi                    19177  0
amd_iommu_v2           19054  1 fglrx
video                  19476  0
sparse_keymap          13948  1 ideapad_laptop
mac_hid                13205  0
parport_pc             32701  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
psmouse               102222  0
sdhci_pci              23172  0
sdhci                  43015  1 sdhci_pci
ahci                   25819  3
r8169                  67581  0
libahci                32168  1 ahci
mii                    13934  1 r8169

dpkg -l | grep fglrx

Kod Seç Genişlet

ii  fglrx                                                 2:13.350.1-0ubuntu2                                   amd64        Video driver for the AMD graphics accelerators
ii  fglrx-amdcccle                                        2:13.350.1-0ubuntu2                                   amd64        Catalyst Control Center for the AMD graphics accelerators
buyrun hocam

[if]

AMD yönetim panelinden kartlar arası geçişi sağlayamıyor musunuz?

Kod Seç Genişlet

amdconfig --pxl çıktısına bakayım.

[Acracotoxin]

Kod Seç Genişlet

No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configuration file manually and run aticonfig again.
amdconfig: parsing the command-line failed.



[if]

Kod Seç Genişlet

sudo aticonfig --initial

[Acracotoxin]

verdiğin komutu yazıp tekrar amdconfig -pxl i yazdım

Kod Seç Genişlet

PowerXpress: Discrete GPU is active (High-Performance mode).
çıktısı

[if]

Kod Seç Genişlet

sudo amdconfig --px-igpu ile diğer kart seçilecektir.

[Acracotoxin]

böyle bi çıktı aldım

Kod Seç Genişlet

PowerXpress: Integrated GPU is selected (Power-Saving mode), please restart Xserver(s) for changes to take effect!



[if]

Oturumu kapatıp tekrar açın.

[Acracotoxin]

oturumu kapatıp tekrar açtım fakat amd catalyst control centerde hala seçili olarak 7660g gösteriyor ve diğer ekran kartını bilinmeyen olarak gösteriyor.

[if]

Kod Seç Genişlet

sudo amdconfig --initial --force --adapter=all
sudo amdconfig --px-igpu
sudo reboot ile yeniden başlatınca ne gösteriyor?

[Acracotoxin]

Bi değişme yok sanırım hala 7660g seçili diğer ise bilinmeyen olarak duruyor yani catalyst ile ekran kartını değiştiremiyorum

[if]

Kod Seç Genişlet

amdconfig --help çıktısına bakayım.

[Acracotoxin]

Kod Seç Genişlet

you know the capabilities of your monitor before changing this option.
        Screens start at 0.  You can use 1 for dual-head
  --vrefresh=Screen#,LOW-HIGH
        Change the vertical refresh range of the specified monitor.  Make sure
        you know the capabilities of your monitor before changing this option.
        Screens start at 0.  You can use 1 for dual-head
  --hsync2=LOW-HIGH
        Change the horizontal sync range of the second display.  Make sure you
        know the capabilities of your monitor before changing this option.
  --vrefresh2=LOW-HIGH
        Change the vertical refresh range of the second display.  Make sure you
        know the capabilities of your monitor before changing this option.
  --mode2=W1xH1,W2XH2,W3xH3,...
        Change the modes for the second display.  You may specify several
        resolutions separated by commas.  Only valid for clone and big desktop
        settings.
  --screen-layout={left|right|above|below}
        Set the secondary screen position for dual head.
  --screen-overlap=NUM
        Set the screen overlap region in big desktop mode to be NUM pixels.
Advanced Options:
  --sync-video={on|off}
        Enable/disable sync to vsync for AVIVO video.
        This option is enabled by default and is used to prevent
        video tearing. By disabling this option video is free to
        render as fast as the 3D engine can handle. In the case of
        choppy video try to disable sync-video.
  --tls={on|off}
        Enable/disable fast thread local storage.  Disable this option when
        virtual machines or WineX fail to work properly.
  --locked-userpages={on|off}
        Enable/disable locked user pages. Disable this option if the system
        hangs when running fgl_glxgears.
        User page lock is no longer available on AGP system now.
  --max-gart-size=VALUE1,VALUE2
        Set user-defined max total GART size(VALUE1) and cacheable gart
        size(VALUE2) for non-AGP systems.
        This option can combined with --adapter option to set the gart size
        for individual card.

Dynamic Display Management Options:
  Following options will not change the config file. They are
  used for querying driver, controller and adaptor information.
  These options will be effective immediately. Other options on
  the same command line will be ignored.
  --enable-monitor=STRING,STRING
        Setting current monitor to be enabled. Only 2 displays
        can be enabled at the same time. Any displays
        that are not on the list will be disabled.
        STRING can be one of the following set, separated
        by commas:
            none
            crt1
            crt2
            lvds
            tv
            cv
            tmds1
            tmds2
            tmds2i
            dfp3
            dfp4
            dfp5
            dfp6
            auto   -- use default policy to enable the displays.
  --query-monitor
        This will return connected and enabled monitor information
  --swap-monitor
        This only works for big desktop setup. This will swap the
        contents on the two monitors.
  --swap-screens={on|off}
        Enable/disable swap heads in dual-head mode.
        This option works only in dual-head mode.

Pair mode options:
  Following options are used for query add and remove pair modes.
  These options will be effective immediately. Other options on  
  the same command line will be ignored.
  --list-pairmode
        list all the current existing pair modes the driver can use.
  --add-pairmode=width0xheight0+width1xheight1
        Add one pair mode to the list. width0 and height0 are the
        size of primary display and width1 and height1 for the
        secondary  display.
  --remove-pairmode=index
        Remove one pair mode from the list. User can get index by
        list-pairmode.

External Events Daemon Options:
  Following options will not change the config file. They are
  used to send commands to the atieventsd external events daemon.
  --set-policy=STRING
        Sets the event policy for the daemon to be STRING.
        See the atieventsd(8) manpage for further details.

Display attribute options:
  Following options are used for query and set adjustment of
  specific attribute for specific display. These options will be
  effective immediately. Other options on the same command line
  will be ignored.
  The DISPLAYTYPE in options can be one of the following strings:
        crt1,  lvds,   tv,   cv,   tmds1, crt2,
        tmds2, tmds2i, dfp3, dfp4, dfp5,  dfp6 .
   The ATTRIBTYPE in options can be one of the following strings:
        brightness, contrast, saturation, hue, positionX,
        positionY, sizeX, sizeY, overscan, videoStandard 
  --query-dispattrib=DISPLAYTYPE,ATTRIBTYPE
        query the specific adjustment info of the specific display.
        if ATTRIBTYPE is not specified, all supported attribute
        information will be printed out.
  --set-dispattrib=DISPLAYTYPE,ATTRIBTYPE:VALUE
        set the attribute value of the specific display.

Connector type options:
  Following options are used for query connector type
  for specific display. These options will be
  effective immediately. Other options on the same command line
  will be ignored.
  The DISPLAYTYPE in options can be one of the following strings:
        crt1,  lvds,   tv,   cv,   tmds1, crt2,
        tmds2, tmds2i, dfp3, dfp4, dfp5,  dfp6 .
   --query-connectortype=DISPLAYTYPE
        query the connector type of the specific display.

Component video dongle options:
  Following options are used for query and set dongles for a
  component video. These options will be effective immediately.
  Other options on the same command line will be ignored.
  --query-cvdongle
        query dongle setting informations of the component video.
  --set-cvdongle=VALUE
        set the custom override value of the CV dongle.
  --reset-cvdongle
        reset the custom override setting(to zero)of the CV dongle.

Component video customized mode options:
  Following options are used for query and set customized mode for
  component video. These options will be effective immediately.
  Other options on the same command line will be ignored.
  --query-cvmode
        query customized modes for component video.
  --add-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEDHEIGHT,REFRESH.
        add a customized mode for component video.
  --validate-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEHEIGHT,REFRESH.
        validate a customized mode for component video.
  --delete-cvmode=INDEX
        delete one customized mode for component video.

Persistent Configuration Store (PCS) Options:
  Following options will not change the config file. They are
  used to manipulate the PCS database.  Due to their nature, these.
  commands may only be run by the root user. Note that the prefix
  and key names are not case-sensitive.
  --get-pcs-key=PREFIX,KEY
        Prints out the specified prefix and key from the PCS
        database.  The type of data will be shown along with
        the contents.
  --set-pcs-u32=PREFIX,KEY,VALUE
  --set-pcs-val=PREFIX,KEY,VALUE (deprecated)
        Sets an integer value at the specified prefix and key in
        the PCS database.  The value may be specified in hex by
        prefixing it with 0x or in octal by prefixing it with 0,
        otherwise the value is assumed to be in decimal.  Note
        that --set-pcs-val is deprecated and --set-pcs-u32 should
        be used instead.  --set-pcs-val will be removed soon.
  --set-pcs-u32array=PREFIX,KEY,VALUE[,VALUE]...
        Sets an array of integer values at the specified prefix
        and key in the PCS database.  The values may be specified
        in hex by prefixing it with 0x or in octal by prefixing
        it with 0, otherwise the value is assumed to be in decimal.
        (e.g. --set-pcs-u32array="TestSection,TestData,1,0x2,3")
  --set-pcs-str=PREFIX,KEY,STRING
        Sets a string value at the specified prefix and key in
        the PCS database.
  --set-pcs-raw=PREFIX,KEY,HEXSTRING
        Sets a raw binary value at the specified prefix and key in
        the PCS database.  The value is specified as a series of
        hex bytes with no 0x or spaces.
        (e.g. --set-pcs-raw="TestSection,TestData,E84C0E" sets 3 bytes)
  --set-pcs-bool=PREFIX,KEY,VALUE
        Sets a boolean value at the specified prefix and key in
        the PCS database.  The value may be specified as either
        "true", "yes", "on", "enable" or "1" meaning boolean TRUE or
        "false", "no", "off", "disable" or "0" meaning boolean FALSE.
  --del-pcs-key=PREFIX,KEY
        Deletes the specified prefix and key from the PCS database.

Multiple display adapter options:
  Following options are used for querying and setting up multiple
  display adapters that are installed for multihead or Crossfire
  configurations.
  --lsa, --list-adapters
        Lists all detected and supported display adapters.
        The default adapter (used when --adapter is not specified)
        will be indicated with a "*" next to it.
  --adapter=ADAPTERLIST
        Selects which adapters returned by --list-adapters should
        be affected by other aticonfig options.  ADAPTERLIST contains
        either a comma-seperated sequence of the index numbers of the
        adapters to be affected or else contains the keyword "all" to
        select all the adapters.  If --adapter is missing, only the
        default adapter will be affected.
  --lscc, --list-crossfire-candidates
        Queries the driver to determine the pool of available devices that can
        can be chained together for CrossFire.
  --lscs, --list-crossfire-status
        List current Crossfire status (enabled or disabled) along with diagnostics
        information indicates the status of your system
  --lsch, --list-mgpu-chains
        Lists the MGPU chains that are currently defined along with their
        enabled state
  --cfa, --add-crossfire-chain
        Defines a new CrossFire chain.  --adapter should contain the adapter
        chain definition, with the master adapter being the first entry and
        the slave adapters being the subsequent entries in order of priority.
  --cfd, --delete-crossfire-chain
        Delete and existing defined CrossFire chain.  --adapter should list the
        master adapters of the chains to be deleted.  --adapter=all will delete
        all chain definitions.
  --cf, --crossfire={on|off}
        Enables/disables CrossFire support on the currently defined CrossFire
        chains.  --adapter should list the master adapters to be enabled or
        disabled.
  --cfl, --crossfire-logo={on|off}
        Enables/disables the appearance of the CrossFire Logo when rendering
        in CrossFire mode
  --addch, --add-mgpu-chain
        Defines a new MGPU chain.  --adapter should contain the adapter
        chain definition, with the master adapter being the first entry and
        the slave adapters being the subsequent entries in order of priority.
  --mgpu-sls={on|off}
        Enables/disables MGPU-SLS(Multiple GPU Single Large Surface)support
        on the currently defined MGPU chains.  --adapter should list the
        master adapters to be enabled or disabled.
  --delch, --delete-mgpu-chain
        Delete and existing defined MGPU chain.  --adapter should list the
        master adapters of the chains to be deleted.  --adapter=all will delete
        all chain definitions.

AMD Overdrive (TM) options:
  The following options are used to get and set current and peak, core
  and memory clock information as well as read the current temperature of
  adapters.  By using the "--adapter=" argument the AMD Overdrive (TM)
  options can be targeted to a particular adapter in a multi-adapter scenario.
  If no adapter is explicitly targeted the commands will be run on the Default
  adapter as indicated by the "--list-adapters" command
  --od-enable
        Unlocks the ability to change core or memory clock values by
        acknowledging that you have read and understood the AMD Overdrive (TM)
        disclaimer and accept responsibility for and recognize the potential
        dangers posed to your hardware by changing the default core or memory
        clocks
  --od-disable
        Disables AMD Overdrive(TM) set related aticonfig options.  Previously
        commited core and memory clock values will remain, but will not be set
        on X Server restart.
  --odgc, --od-getclocks
        Lists various information regarding current core and memory clock
        settings.
        Including: current and peak clocks
                   the theoretical range clocks can be set to
                   the current load on the GPU
  --odsc, --od-setclocks={NewCoreClock|0,NewMemoryClock|0}
        Sets the core and memory clock to the values specified in MHz
        The new clock values must be within the theoretical ranges provided
        by --od-getclocks.  If a 0 is passed as either the NewCoreClock or
        NewMemoryClock it will retain the previous value and not be changed.
        There is no guarantee that the attempted clock values will succeed
        even if they lay inside the theoretical range.  These newly set
        clock values will revert to the default values if they are not
        committed using the "--od-commitclocks" command before X is
        restarted
  --odrd, --od-restoredefaultclocks
        Sets the core and memory clock to the default values.
        Warning X needs to be restarted before these clock changes will take
        effect
  --odcc, --od-commitclocks
        Once the stability of a new set of custom clocks has been proven this
        command will ensure that the Adapter will attempt to run at these new
        values whenever X is restarted
  --odgt, --od-gettemperature
        Returns the temperature reported by any thermal sensors available on
        the adapter.

ACPI Options:
  --acpi-services=on|off
        Enable/disable ACPI services. In the case of BIOS or kernel ACPI issues,
        ACPI services in the driver can be disabled through this option.
        The ACPI services are enabled by default.
  --acpi-display-switch=on|off
        Enable/disable display switching with ACPI methods on mobile platforms.
        This option is enabled by default.

Genlock/Framelock options:
  The following options are used to control operation with GLSYNC module
  in the system.  By using the "--adapter=" argument --glsync-getconfig,
  --glsync-setconfig, --glsync-getgenlock, --glsync-setgenlock options
  can be targeted to a particular adapter in a multi-adapter scenario.
  If no adapter is explicitly targeted the commands will be run on the Default
  adapter as indicated by the "--list-adapters" command
  --glsync-getport={RJ45_1 | RJ45_2 | BNC}
        Get configuration state for specified GLSync port.
        Including: Number of LEDs
                   Scanned frequency
                   Signal Source for RJ45 port if it is configured as output
                   Port state (Input or Output) for RJ45 port
                   Signal type for BNC port
  --glsync-setport=port_type,cntl,sig_src
        Set configuration for specified GLSync port
        Parameters: port_type - RJ45_1 or RJ45_2
                                only RJ45 ports can be configured
                    cntl - 0 if port is configured as input or
                           1 if port is configured as output
                    sig_src - signal source for GL Sync port
                              if 0-3 - GPU port index
                              if RJ45_1, RJ45_2 or BNC - another GL Sync port
                              if -1  - signal source is undefined
  --glsync-getconfig
        Get timing configuration for particular GL Sync connector
        Including: Sync Delay in ms
                   Signal Source
                   Sample Rate
                   Sync field
                   Trigger Edge
                   Scan Rate multiplier
                   GPU port index this adapter connected to
  --glsync-setconfig=delay,fr_cntl,sig_src,smpl_rate,fld,edge,coef
        Set timing configuration for GL Sync connector
        Parameters: delay - Sync Delay in ms
                    fr_cntl - Enable/Disable framlock control
                              0 Disable Framelock
                              1 Enable Framelock
                    sig_src - Signal Source for this adapter.
                              if 0-3 - GPU port index.
                                   It can not be GPU port index of this adapter
                              if RJ45_1, RJ45_2 or BNC - GL Sync port
                              if -1  - signal source is undefined
                    smpl_rate - Sample Rate for sampled sync signal.
                              0 for no sampling
                    fld - Sync field for interlaced sync signal.
                              0 if sync field is undefined
                              1 if synced to both field
                              2 if synced to field 1
                    edge - it is defined which signal edge
                                 should trigger synchronization
                              0 if edge is undefined
                              1 if it is triggered by raising edge
                              2 if it is triggered by falling edge
                              3 if it is triggered by both edges
                    coef - Scan Rate multiplier applied to sync signal
                              0 if coef is undefined
                              1 if coef is 5
                              2 if coef is 4
                              3 if coef is 3
                              4 if coef is 2.5
                              5 if coef is 2
                              6 if coef is 1.33
                              7 if coef is 1.25
                              8 if coef is 1.
                              9 if coef is 0.8
                             10 if coef is 0.67
                             11 if coef is 0,5
                             12 if coef is 0.4
                             13 if coef is 0.33
                             14 if coef is 0.25
                             15 if coef is 0.2
        Note: Some parameters may not be valid for manual configuration.
              Please use --glsync-getconfig command to verify.
  --glsync-getgenlock=disp_type
        Get genlock mode for particular display
        disp_type  - Display Type. When RandR 1.2 and above is enabled
                     can be query by using xrandr -q command.
                     If RandR 1.2 is not enabled
                     aticonfig --query-monitor command should be used
                     to query this parameter
  --glsync-setgenlock=disp_type,mode,timing_server
        Set genlock mode for particular display
        Parameters: disp_type  - Display Type.
                                 When RandR 1.2 and above is enabled
                                 can be query by using xrandr -q command.
                                 If RandR 1.2 is not enabled
                                 aticonfig --query-monitor command
                                 should be used to query this parameter.
                    mode       - Enable/Disable Genlock
                                 0 Disable Genlock
                                 1 Enable Genlock
                    timing_server - Enable/Disable timing server
                                 0 to configure display as free run
                                 1 to configure display as a timing server
  --glsync-restart
        Reinitialized all genlock settings after power down system

X Server Options:
  --xinerama={on|off}
        Enable/disable Xinerama (MultiView) in the X Server configuration file.
        MultiView allows for the merging of independent desktop heads into a
        unified workspace allowing windows to freely cross X Screen boundaries.

Uninstall options:
     --uninstall{=force|dryrun}
         dryrun tests uninstall but does not uninstall.
         force removes all installed files without verification.
         Uninstall without an option tries to perform the default uninstall procedure.

Miscellaneous Options:
  -v, --verbose
        Show what aticonfig is doing.
  -q, --quiet
        Disable all information output except for errors.
  --effective={now,startup}
        Choose when the requested changes should take effect.
            now:     Immediately.  This change will affect the running X
                     session if applicable.  Only 'set-powerstate' and
                     'overlay-on' are applicable for now.
            startup: On future X server startups.  This change will modify the
                     X server configuration file if applicable.
        The default is 'now,startup', i.e., do both as applicable.
  --nobackup
        Do not make an automatic backup of the configuration file.
  -i, --input=FILE
        Select a FILE to input as the configuration file. Set FILE to '-' to
        pipe from standard input.  Without this option, aticonfig will search
        /etc/X11 for the default configuration file.
  -o, --output=FILE
        Select a FILE to output the new configuration file to.  Set FILE to '-'
        to print to standard output.  Without this option, aticonfig will
        replace the input file with the newly generated file.
  -h, --help
        Display this help screen.
  -f, --force
        Only valid with 'initial' option.  Force aticonfig to generate default
        Monitor, Device, and Screen sections even if the original configuration
        file has invalid settings in these sections.

Composite options:
  --xv-pixmap-buffer-type=gartcacheable
       Allocate pixmap buffer from GART cacheable heap.
  --xv-pixmap-buffer-type=lfb
       Allocate pixmap buffer from local framebuffer.
  --xv-pixmap-buffer-type=gartuswc
       Allocate pixmap buffer from GART USWC heap.

PowerXpress options:
  Warning: Configure PowerXpress in console mode is not always be guaranteed to have effect.
  --px-list-active-gpu
  --pxl
       List current activated GPU
  --px-dgpu
       Activate discrete GPU (High-Performance mode), must re-start X to take effect
  --px-igpu
       Activate integrated GPU (Power-Saving mode), must re-start X to take effect

Examples:
  1. Setting up fglrx for the first time.
       Single head :    aticonfig --initial --input=/etc/X11/xorg.conf
       Dual head   :    aticonfig --initial=dual-head --screen-layout=above
                        This command will generate a dual head configuration
                        file with the second screen located above the first
                        screen.
       Multi head  :    aticonfig --initial --heads=4 --adapter=1
                        This command will generate 4 adjacent X Screens
                        on adapter 1.  Use with -f to reduce previously configured heads.
  2. Setting up big desktop to horizontal and set overlay on secondary display.
                        aticonfig --dtop=horizontal --overlay-on=1
  3. Setting up modes for primary display.
                        aticonfig --resolution=0,1600x1200,1280x1024,1024x768
  4. Change tv geometry
                         aticonfig --tv-geometry=85x90+10-10
         This will set tv to 85% width (where 100% ==
         overscan) 90% height and shift 10 pixels right of centre
         and 10 pixels down of centre.
  5. Multiple display adapters.
       List adapters :  aticonfig --list-adapters
       Init 0 and 2  :  aticonfig --adapter=0,2 --initial
       Init all      :  aticonfig --adapter=all --initial
       MultiView     :  aticonfig --xinerama=on
  6. AMD Overdrive (TM).
       List adapters          :  aticonfig --list-adapters
       Get Clocks of 0        :  aticonfig --adapter=0 --od-getclocks
       Set new Clocks for 0   :  aticonfig --adapter=0 --od-setclocks=770,1126
       Test out 3D            :  atiode -P60 -H localhost:0; echo $?
       Check Temperature of 0 :  aticonfig --adapter=0 --od-gettemperature
       Commit changes for 0   :  aticonfig --adapter=0 --od-commitclocks

     ***note***
             atiode is a stress application you start with a required
             parameter -P which specifies the test duration and the optional
             -H parameter to target a specific display to use.  For example
             atiode -P 600 -H localhost:0 would test display 0 for 10 minutes
             the return code from the application is the test result
             0: Test successfully completed.
             1: Invalid command-line parameters.
             2: Test failed because of rendering errors.
             3: Target adapter not found.
             4: Test aborted due to unknown reason

  7. Framelock/Genlock with GL Sync module
       Set GL Sync connector parameters for particular adapter:
                     aticonfig --glsync-setconfig=0,0,2,0.0,3,8 --adapter=1
       Enable Genlock for particular display:
                     aticonfig --glsync-setgenlock=lvds,1,0 --adapter=1
       Enable Timing Master:
                     aticonfig --glsync-setgenlock=dfp3,0,1 --adapter=1
       Verify if the frequency is locked for particular display:
                     aticonfig --glsync-getgenlock=crt1 --adapter=1
       Set GL Sync output port RJ45_1:
                     aticonfig --glsync-setport=RJ45_1,1,BNC
       Reinitialize all genlock settings for all displays and adapters:
                     aticonfig --glsync-restart

Please report bugs to http://support.amd.com



[if]

Kod Seç Genişlet

sudo amdconfig --list-adapters
sudo amdconfig --px-list-active-gpu çıktılarına bakayım. Hangi kart kullanılıyormuş öğrenelim.

[Acracotoxin]

list adapters

Kod Seç Genişlet

* 0. 00:01.0 AMD Radeon HD 7660G
  1. 01:00.0 AMD Radeon HD 7600M Series

* - Default adapter

list active gpu

Kod Seç Genişlet

PowerXpress: Discrete GPU is active (High-Performance mode).



[if]

@Acracotoxin, harici kartı kullandığını söylüyor. fglrx-pxpress paketini kurup deneyebiliriz ama önce

Kod Seç Genişlet

cat /sys/kernel/debug/vgaswitcheroo/switch çıktısına bakayım.

[Acracotoxin]

Böyle bi dosya yada dizin yok diyor

Kod Seç Genişlet

cat: /sys/kernel/debug/vgaswitcheroo/switch: Böyle bir dosya ya da dizin yok




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Haziran 2014 - 19:43:23
@if, ilk önce erişim engellendi dedi sonra root olarak denedim böyle b dizin yok dedi

[if]

O zaman fglrx-pxpress paketini kuralım. Hatta

Kod Seç Genişlet

sudo apt-get install linux-headers-$(uname -r) fglrx-pxpress Ardından kartlar arasında geçiş yapmaya çalışalım:

Kod Seç Genişlet

sudo amdconfig --px-igpu komutundan sonra yeniden başlatın.

[Acracotoxin]

@if dediklerinizi yaptım fakat bi değişim sözkonusu değil hocam varmı tavsiyeniz

[if]

AMD'nin sunduğu sürücü denenebilir. Daha ne yaparız bilmiyorum.

[Acracotoxin]

14.04 de mi bi sorun var acaba ?

[if]

Başkaları var kartlar arası geçiş yapan. 3.15 serisi bir çekirdek kurabilirsiniz.

[Acracotoxin]

@if usr/share/ati kısmında install yönergesi gibi bişey var orada şu hata mevcut
[Error]A previous installation of fglrx driver detected to be loaded.
User must uninstall existing fglrx driver
or run install with force option.
Forcing the installation is not recommended.

neyi silmem gerekiyo ?