Ubuntu - Kubuntu 14.04 LTS Wifi sorunu

emrr5 · 24 Nisan 2014 - 20:59:58

Merhaba,

Win8'in yanına önce Ubuntu 14.04 LTS daha sonra da aynı sorun olur mu diye görmek için Kubuntu 14.04 LTS kurdum. Her iki kurulum sonrasında yaşadığım tek sorun wifi üzerinden bağlı olduğum internetin sağlıklı bir şekilde çalışmaması oldu. Win8 üzerinde herhangi bir sorun yaşamıyorum. Yaşadğım sorun internette kesilme, yavaşlama yada donma gibi değil. Hiç bir hata almıyorum, internete bağlıyım ancak hızım o kadar düşük ki neredeyse saniyede bir kaç kb veri transferi gerçekleştirebiliyorum. Bilgisayar ilk açıldığında bir iki dakika internet normal hızında (3-10 Mb/s) seyrederken sonrasında tekrar yavaşlıyor. Sayfaların yada yazılımların/güncellemelerin yüklenmesi internet hızı gerektiğinden fazla yavaş olduğu için kesiliyor.

Arama motorlarında bulduğum aşağıdaki çözümleri denedim ancak hiçbir faydası olmadı:

http://www.noobslab.com/2012/05/disable-ipv6-if-your-internet-is.html

http://askubuntu.com/questions/450049/extremely-slow-connection-with-a-broadcom-bcm4313-wireless-card

Önerebileceğiniz bir çözüm olursa sevinirim.

Teşekkür ederim.

if · 24 Nisan 2014 - 21:11:32

İlk bağlantıdaki öneri ipv6'yı devre dışı bırakmıyor. ipv6 sürücüsü çekirdeğe gömülü geldiği için çalışmaya devam eder. ipv6'yı devre dışı bırakmak için çekirdek önyükleme seçeneklerinden[1] ipv6.disable=1 kullanılması gerek. dhclient için bunu[2] deneyin. İlgili satırları sildikten sonra şöyle bir şey olması gerek:

Kod Seç

# dhcp6 ile başlayan ne varsa silin. ipv6'yı her ne kadar çekirdek seviyesinde engellesek de 
# dhclient ipv6'yı sorgulamaya devam ediyor. Bunu engelliyoruz.
request subnet-mask, broadcast-address, time-offset, routers,
	domain-name, domain-name-servers, domain-search, host-name,
	netbios-name-servers, netbios-scope, interface-mtu,
	rfc3442-classless-static-routes, ntp-servers;

Ağ kartınız nedir bir öğrenelim:https://forum.ubuntu-tr.net/index.php?topic=28764.0

[1] http://wiki.ubuntu-tr.net/index.php?title=%C3%87ekirdek_%C3%B6ny%C3%BCkleme_se%C3%A7enekleri
[2] https://forum.ubuntu-tr.net/index.php?topic=41743.msg492026#msg492026

emrr5 · 24 Nisan 2014 - 22:24:00

Yanıtınız için teşekkür ederim.

Çıktılar:

cat /etc/lsb-release

Kod Seç

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04 LTS"

uname -a

Kod Seç

Linux Kubuntu14 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

lspci

Kod Seç

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 680] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
03:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 03)
04:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41)
06:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)
07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)

lsusb

Kod Seç

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 2109:0811  
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 09da:054f A4 Tech Co., Ltd
Bus 001 Device 004: ID 045e:0291 Microsoft Corp. Xbox 360 Wireless Receiver for Windows
Bus 001 Device 003: ID 0586:341e ZyXEL Communications Corp. NWD2105 802.11bgn Wireless Adapter [Ralink RT3070]
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 0781:5581 SanDisk Corp.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

sudo lshw -C network

Kod Seç

*-network               
       description: Ethernet interface
       product: AR8161 Gigabit Ethernet
       vendor: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:06:00.0
       logical name: eth0
       version: 10
       serial: 90:2b:34:d3:01:61
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=alx latency=0 link=no multicast=yes port=twisted pair
       resources: irq:48 memory:f7200000-f723ffff ioport:d000(size=128)
  *-network
       description: Wireless interface
       physical id: 2
       bus info: usb@1:1.4
       logical name: wlan0
       serial: cc:5d:4e:02:43:54
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rt2800usb driverversion=3.13.0-24-generic firmware=0.29 ip=192.168.0.16 link=yes multicast=yes wireless=IEEE 802.11bgn

ifconfig
eth0      Link encap:Ethernet  HWaddr 90:2b:34:d3:01:61  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:18

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:355 errors:0 dropped:0 overruns:0 frame:0
          TX packets:355 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:31026 (31.0 KB)  TX bytes:31026 (31.0 KB)

wlan0     Link encap:Ethernet  HWaddr cc:5d:4e:02:43:54  
          inet addr:192.168.0.16  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::ce5d:4eff:fe02:4354/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:344 errors:0 dropped:0 overruns:0 frame:0
          TX packets:559 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:259026 (259.0 KB)  TX bytes:90423 (90.4 KB)

iwconfig

Kod Seç

eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:"Uydunet"  
          Mode:Managed  Frequency:2.462 GHz  Access Point: 00:1A:2B:96:9C:F6   
          Bit Rate=24 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          Link Quality=69/70  Signal level=-41 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:550  Invalid misc:218   Missed beacon:0

iwlist scanning

Kod Seç

Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 00:1A:2B:96:9C:F6
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=70/70  Signal level=-39 dBm  
                    Encryption key:on
                    ESSID:"Uydunet"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000001185422dc
                    Extra: Last beacon: 13992ms ago
                    IE: Unknown: 0007557964756E6574
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD090010180205F0000000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00

lsmod

Kod Seç

Module                  Size  Used by
bnep                   19624  2
rfcomm                 69160  0
bluetooth             395423  10 bnep,rfcomm
nls_iso8859_1          12713  1
arc4                   12608  2
rt2800usb              27034  0
rt2x00usb              20742  1 rt2800usb
rt2800lib              89076  1 rt2800usb
rt2x00lib              55307  3 rt2x00usb,rt2800lib,rt2800usb
mac80211              626489  3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211              484040  2 mac80211,rt2x00lib
snd_hda_codec_hdmi     46207  1
crc_ccitt              12707  1 rt2800lib
intel_rapl             18773  0
hid_generic            12548  0
joydev                 17381  0
xpad                   18218  0
ff_memless             13573  1 xpad
x86_pkg_temp_thermal    14205  0
intel_powerclamp       14705  0
snd_hda_codec_via      27860  1
coretemp               13435  0
snd_hda_intel          52355  10
snd_hda_codec         192906  3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
kvm                   451511  0
snd_pcm               102099  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
crct10dif_pclmul       14289  0
crc32_pclmul           13113  0
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
ghash_clmulni_intel    13259  0
aesni_intel            55624  0
snd_rawmidi            30144  1 snd_seq_midi
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29482  2 snd_pcm,snd_seq
aes_x86_64             17131  1 aesni_intel
snd                    69238  31 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore              12680  1 snd
lrw                    13286  1 aesni_intel
gf128mul               14951  1 lrw
glue_helper            13990  1 aesni_intel
ablk_helper            13597  1 aesni_intel
cryptd                 20359  3 ghash_clmulni_intel,aesni_intel,ablk_helper
mei_me                 18627  0
psmouse               102222  0
mei                    82274  1 mei_me
serio_raw              13462  0
lpc_ich                21080  0
mac_hid                13205  0
parport_pc             32701  0
ppdev                  17671  0
lp                     17759  0
parport                42348  3 lp,ppdev,parport_pc
usb_storage            62209  0
hid_logitech_dj        18581  0
usbhid                 52616  0
hid                   106148  5 hid_generic,usbhid,hid_logitech_dj
nouveau              1097199  3
mxm_wmi                13021  1 nouveau
i2c_algo_bit           13413  1 nouveau
ttm                    85115  1 nouveau
drm_kms_helper         52758  1 nouveau
ahci                   25819  2
alx                    32452  0
drm                   302817  5 ttm,drm_kms_helper,nouveau
libahci                32168  1 ahci
mdio                   13807  1 alx
wmi                    19177  2 mxm_wmi,nouveau
video                  19476  1 nouveau

dmesg

Kod Seç

[    0.000000] efi: mem150: type=4, attr=0xf, range=[0x00000000df47b000-0x00000000df483000) (0MB)
[    0.000000] efi: mem151: type=6, attr=0x800000000000000f, range=[0x00000000df483000-0x00000000df7d7000) (3MB)
[    0.000000] efi: mem152: type=4, attr=0xf, range=[0x00000000df7d7000-0x00000000df800000) (0MB)
[    0.000000] efi: mem153: type=7, attr=0xf, range=[0x0000000100000000-0x000000031f000000) (8688MB)
[    0.000000] efi: mem154: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[    0.000000] efi: mem155: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem156: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[    0.000000] efi: mem157: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem158: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem159: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77X-D3H, BIOS F15 08/22/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x31f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask F00000000 write-back
[    0.000000]   2 base 300000000 mask FF0000000 write-back
[    0.000000]   3 base 310000000 mask FF8000000 write-back
[    0.000000]   4 base 318000000 mask FFC000000 write-back
[    0.000000]   5 base 31C000000 mask FFE000000 write-back
[    0.000000]   6 base 31E000000 mask FFF000000 write-back
[    0.000000]   7 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 8GB, type WB
[    0.000000] reg 1, base: 8GB, range: 4GB, type WB
[    0.000000] reg 2, base: 12GB, range: 256MB, type WB
[    0.000000] reg 3, base: 12544MB, range: 128MB, type WB
[    0.000000] reg 4, base: 12672MB, range: 64MB, type WB
[    0.000000] reg 5, base: 12736MB, range: 32MB, type WB
[    0.000000] reg 6, base: 12768MB, range: 16MB, type WB
[    0.000000] reg 7, base: 3584MB, range: 512MB, type UC
[    0.000000] total RAM covered: 12272M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 32M         num_reg: 7      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 512MB, type WB
[    0.000000] reg 3, base: 4GB, range: 4GB, type WB
[    0.000000] reg 4, base: 8GB, range: 4GB, type WB
[    0.000000] reg 5, base: 12GB, range: 512MB, type WB
[    0.000000] reg 6, base: 12784MB, range: 16MB, type UC
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff8800000fd7e0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[    0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x31ee00000-0x31effffff]
[    0.000000]  [mem 0x31ee00000-0x31effffff] page 2M
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x31c000000-0x31edfffff]
[    0.000000]  [mem 0x31c000000-0x31edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x300000000-0x31bffffff]
[    0.000000]  [mem 0x300000000-0x31bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdded6fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xdddfffff] page 2M
[    0.000000]  [mem 0xdde00000-0xdded6fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xdeac6000-0xdeac6fff]
[    0.000000]  [mem 0xdeac6000-0xdeac6fff] page 4k
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdeb0a000-0xdf482fff]
[    0.000000]  [mem 0xdeb0a000-0xdebfffff] page 4k
[    0.000000]  [mem 0xdec00000-0xdf3fffff] page 2M
[    0.000000]  [mem 0xdf400000-0xdf482fff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdf7d7000-0xdf7fffff]
[    0.000000]  [mem 0xdf7d7000-0xdf7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[    0.000000]  [mem 0x100000000-0x2ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x34bcc000-0x365ddfff]
[    0.000000] ACPI: RSDP 00000000de2e0000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000de2e0070 00005C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000de2ea9b8 0000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000de2e0160 00A855 (v02 ALASKA    A M I 00000012 INTL 20051117)
[    0.000000] ACPI: FACS 00000000de2fef80 000040
[    0.000000] ACPI: APIC 00000000de2eaab0 000072 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000de2eab28 00003C (v01                 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000de2eab68 000038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000de2eaba0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000de2eaf10 0009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000de2eb8c0 000A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000031effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x31effffff]
[    0.000000]   NODE_DATA [mem 0x31efee000-0x31eff2fff]
[    0.000000]  [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880312600000-ffff88031e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x31effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdded6fff]
[    0.000000]   node   0: [mem 0xdeac6000-0xdeac6fff]
[    0.000000]   node   0: [mem 0xdeb0a000-0xdf482fff]
[    0.000000]   node   0: [mem 0xdf7d7000-0xdf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x31effffff]
[    0.000000] On node 0 totalpages: 3135512
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14178 pages used for memmap
[    0.000000]   DMA32 zone: 907386 pages, LIFO batch:31
[    0.000000]   Normal zone: 34752 pages used for memmap
[    0.000000]   Normal zone: 2224128 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdded7000-0xde1d9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde1da000-0xde1dafff]
[    0.000000] PM: Registered nosave memory: [mem 0xde1db000-0xde2fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xde300000-0xdea45fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdea46000-0xdeac5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdeac7000-0xdeb09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf483000-0xdf7d6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88031ec00000 s86336 r8192 d24256 u524288
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3086491
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=10aacd82-62ea-4f56-8519-48f47f3a0bdb ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12026416K/12542048K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 515632K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 50331648 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3403.679 MHz processor
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6807.35 BogoMIPS (lpj=13614716)
[    0.000003] pid_max: default: 32768 minimum: 301
[    0.000697] Security Framework initialized
[    0.000709] AppArmor: AppArmor initialized
[    0.000710] Yama: becoming mindful.
[    0.001472] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.004346] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005624] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.005638] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.005812] Initializing cgroup subsys memory
[    0.005815] Initializing cgroup subsys devices
[    0.005817] Initializing cgroup subsys freezer
[    0.005818] Initializing cgroup subsys blkio
[    0.005819] Initializing cgroup subsys perf_event
[    0.005821] Initializing cgroup subsys hugetlb
[    0.005837] CPU: Physical Processor ID: 0
[    0.005838] CPU: Processor Core ID: 0
[    0.005841] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.005841] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.006102] mce: CPU supports 9 MCE banks
[    0.006111] CPU0: Thermal monitoring enabled (TM1)
[    0.006118] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.006118] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.006118] tlb_flushall_shift: 2
[    0.006206] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
[    0.007030] ACPI: Core revision 20131115
[    0.010558] ACPI: All ACPI Tables successfully acquired
[    0.019630] ftrace: allocating 28408 entries in 111 pages
[    0.029557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069260] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[    0.069265] TSC deadline timer enabled
[    0.070830] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.070835] ... version:                3
[    0.070835] ... bit width:              48
[    0.070836] ... generic registers:      8
[    0.070837] ... value mask:             0000ffffffffffff
[    0.070837] ... max period:             0000ffffffffffff
[    0.070838] ... fixed-purpose events:   3
[    0.070839] ... event mask:             00000007000000ff
[    0.071909] x86: Booting SMP configuration:
[    0.085296] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.071910] .... node  #0, CPUs:      #1 #2 #3
[    0.112320] x86: Booted up 1 node, 4 CPUs
[    0.112323] smpboot: Total of 4 processors activated (27229.43 BogoMIPS)
[    0.114791] devtmpfs: initialized
[    0.116746] EVM: security.selinux
[    0.116747] EVM: security.SMACK64
[    0.116748] EVM: security.ima
[    0.116749] EVM: security.capability
[    0.116778] PM: Registering ACPI NVS region [mem 0xde1db000-0xde2fffff] (1200128 bytes)
[    0.116789] PM: Registering ACPI NVS region [mem 0xdeac7000-0xdeb09fff] (274432 bytes)
[    0.117307] pinctrl core: initialized pinctrl subsystem
[    0.117345] regulator-dummy: no parameters
[    0.117373] RTC time: 21:38:18, date: 04/24/14
[    0.117395] NET: Registered protocol family 16
[    0.117460] cpuidle: using governor ladder
[    0.117461] cpuidle: using governor menu
[    0.117485] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.117486] ACPI: bus type PCI registered
[    0.117487] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.117523] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.117525] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.121879] PCI: Using configuration type 1 for base access
[    0.122463] bio: create slab <bio-0> at 0
[    0.122558] ACPI: Added _OSI(Module Device)
[    0.122559] ACPI: Added _OSI(Processor Device)
[    0.122560] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.122561] ACPI: Added _OSI(Processor Aggregator Device)
[    0.125031] ACPI: Executed 1 blocks of module-level executable AML code
[    0.128598] ACPI: SSDT 00000000de17c018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.128890] ACPI: Dynamic OEM Table Load:
[    0.128891] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.132522] ACPI: SSDT 00000000de17da98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.132835] ACPI: Dynamic OEM Table Load:
[    0.132837] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.136424] ACPI: SSDT 00000000de189c18 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.136712] ACPI: Dynamic OEM Table Load:
[    0.136713] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.140780] ACPI: Interpreter enabled
[    0.140785] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.140788] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.140797] ACPI: (supports S0 S3 S4 S5)
[    0.140798] ACPI: Using IOAPIC for interrupt routing
[    0.140816] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.140937] ACPI: No dock devices found.
[    0.145630] ACPI: Power Resource [FN00] (off)
[    0.145680] ACPI: Power Resource [FN01] (off)
[    0.145728] ACPI: Power Resource [FN02] (off)
[    0.145776] ACPI: Power Resource [FN03] (off)
[    0.145823] ACPI: Power Resource [FN04] (off)
[    0.146246] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.146249] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.146386] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.146469] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.146907] PCI host bridge to bus 0000:00
[    0.146909] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.146911] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.146912] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.146913] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.146914] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.146915] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.146916] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.146917] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.146918] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[    0.146924] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.146989] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.147013] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.147048] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.147091] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.147112] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit]
[    0.147178] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.147216] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.147239] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.147260] pci 0000:00:16.0: reg 0x10: [mem 0xf741a000-0xf741a00f 64bit]
[    0.147330] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.147396] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.147416] pci 0000:00:1a.0: reg 0x10: [mem 0xf7418000-0xf74183ff]
[    0.147500] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.147549] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.147572] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.147584] pci 0000:00:1b.0: reg 0x10: [mem 0xf7410000-0xf7413fff 64bit]
[    0.147638] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.147679] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.147700] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.147773] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.147815] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.147837] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.147910] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.147952] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.147972] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.148045] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.148089] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.148108] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[    0.148180] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.148223] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.148243] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.148315] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.148357] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.148380] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.148399] pci 0000:00:1d.0: reg 0x10: [mem 0xf7417000-0xf74173ff]
[    0.148484] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.148532] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.148554] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[    0.148706] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.148722] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.148729] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.148736] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.148742] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.148749] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.148755] pci 0000:00:1f.2: reg 0x24: [mem 0xf7416000-0xf74167ff]
[    0.148796] pci 0000:00:1f.2: PME# supported from D3hot
[    0.148848] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.148861] pci 0000:00:1f.3: reg 0x10: [mem 0xf7415000-0xf74150ff 64bit]
[    0.148880] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.148973] pci 0000:01:00.0: [10de:1180] type 00 class 0x030000
[    0.148981] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.148989] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.148998] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.149003] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.149009] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.149066] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[    0.149072] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.158868] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.158872] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.158876] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.158881] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.158947] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.159035] pci 0000:03:00.0: [1106:3432] type 00 class 0x0c0330
[    0.159051] pci 0000:03:00.0: reg 0x10: [mem 0xf7300000-0xf7300fff]
[    0.159171] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.159196] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.166877] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.166884] pci 0000:00:1c.4:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.166976] pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
[    0.167125] pci 0000:04:00.0: supports D1 D2
[    0.167126] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.167149] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.167164] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[    0.167173] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.167174] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.167175] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.167176] pci 0000:00:1c.5:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.167177] pci 0000:00:1c.5:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.167178] pci 0000:00:1c.5:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.167180] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.167181] pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[    0.167317] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.167342] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.167343] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.167344] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.167345] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.167346] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.167347] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.167348] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.167349] pci 0000:04:00.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.167350] pci 0000:04:00.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.167352] pci 0000:04:00.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.167353] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.167354] pci 0000:04:00.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[    0.167434] pci 0000:06:00.0: [1969:1091] type 00 class 0x020000
[    0.167460] pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf723ffff 64bit]
[    0.167474] pci 0000:06:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.167599] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.167629] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.174886] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.174891] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.174896] pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.174984] pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
[    0.175000] pci 0000:07:00.0: reg 0x10: [io  0xc040-0xc047]
[    0.175012] pci 0000:07:00.0: reg 0x14: [io  0xc030-0xc033]
[    0.175023] pci 0000:07:00.0: reg 0x18: [io  0xc020-0xc027]
[    0.175035] pci 0000:07:00.0: reg 0x1c: [io  0xc010-0xc013]
[    0.175046] pci 0000:07:00.0: reg 0x20: [io  0xc000-0xc00f]
[    0.175058] pci 0000:07:00.0: reg 0x24: [mem 0xf7110000-0xf71101ff]
[    0.175070] pci 0000:07:00.0: reg 0x30: [mem 0xf7100000-0xf710ffff pref]
[    0.175125] pci 0000:07:00.0: PME# supported from D3hot
[    0.175148] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.182889] pci 0000:00:1c.7: PCI bridge to [bus 07]
[    0.182894] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.182899] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.182953] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.183384] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.183419] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.183453] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.183486] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.183520] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.183555] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.183589] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.183622] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.183788] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.183793] ACPI: \_SB_.PCI0: notify handler is installed
[    0.183839] Found 1 acpi root devices
[    0.183902] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.183904] vgaarb: loaded
[    0.183904] vgaarb: bridge control possible 0000:01:00.0
[    0.184000] SCSI subsystem initialized
[    0.184028] libata version 3.00 loaded.
[    0.184043] ACPI: bus type USB registered
[    0.184053] usbcore: registered new interface driver usbfs
[    0.184059] usbcore: registered new interface driver hub
[    0.184071] usbcore: registered new device driver usb
[    0.184135] PCI: Using ACPI for IRQ routing
[    0.185469] PCI: pci_cache_line_size set to 64 bytes
[    0.185521] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.185522] e820: reserve RAM buffer [mem 0xdded7000-0xdfffffff]
[    0.185523] e820: reserve RAM buffer [mem 0xdeac7000-0xdfffffff]
[    0.185524] e820: reserve RAM buffer [mem 0xdf483000-0xdfffffff]
[    0.185525] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.185526] e820: reserve RAM buffer [mem 0x31f000000-0x31fffffff]
[    0.185578] NetLabel: Initializing
[    0.185579] NetLabel:  domain hash size = 128
[    0.185579] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.185587] NetLabel:  unlabeled traffic allowed by default
[    0.185623] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.185626] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.187651] Switched to clocksource hpet
[    0.190647] AppArmor: AppArmor Filesystem Enabled
[    0.190663] pnp: PnP ACPI init
[    0.190671] ACPI: bus type PNP registered
[    0.190726] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.190729] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.190737] pnp 00:01: [dma 4]
[    0.190746] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.190756] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.190813] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.190839] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.190840] system 00:04: [io  0x0200-0x020f] has been reserved
[    0.190842] system 00:04: [io  0xffff] has been reserved
[    0.190843] system 00:04: [io  0xffff] has been reserved
[    0.190844] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.190845] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.190847] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.190848] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190866] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.190895] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.190897] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.190971] system 00:07: [io  0x0a00-0x0a0f] has been reserved
[    0.190972] system 00:07: [io  0x0a30-0x0a3f] has been reserved
[    0.190973] system 00:07: [io  0x0a20-0x0a2f] has been reserved
[    0.190975] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.191137] pnp 00:08: [dma 0 disabled]
[    0.191164] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.191193] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.191195] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.191211] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.191385] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.191386] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.191388] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.191389] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.191390] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.191392] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.191393] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.191394] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.191395] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.191397] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.191398] system 00:0b: [mem 0xe0000000-0xe0000fff] has been reserved
[    0.191399] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.191482] pnp: PnP ACPI: found 12 devices
[    0.191482] ACPI: bus type PNP unregistered
[    0.197145] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.197147] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.197149] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.197151] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.197154] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.197164] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.197168] pci 0000:00:1c.4:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.197175] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.197196] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[    0.197206] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.197208] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.197212] pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.197219] pci 0000:00:1c.7: PCI bridge to [bus 07]
[    0.197221] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.197225] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.197232] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.197233] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.197235] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.197236] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.197237] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.197238] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.197239] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.197240] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff]
[    0.197241] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.197243] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.197244] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.197245] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.197246] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.197247] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.197248] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.197250] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.197251] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.197252] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.197253] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[    0.197254] pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff]
[    0.197255] pci_bus 0000:05: resource 8 [io  0x0000-0x0cf7]
[    0.197256] pci_bus 0000:05: resource 9 [io  0x0d00-0xffff]
[    0.197257] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
[    0.197259] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.197260] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.197261] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.197262] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.197263] pci_bus 0000:05: resource 15 [mem 0xe0000000-0xfeafffff]
[    0.197264] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.197265] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.197267] pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
[    0.197268] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.197285] NET: Registered protocol family 2
[    0.197410] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.197573] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.197681] TCP: Hash tables configured (established 131072 bind 65536)
[    0.197691] TCP: reno registered
[    0.197704] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.197745] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.197802] NET: Registered protocol family 1
[    0.235777] pci 0000:01:00.0: Boot video device
[    0.235891] pci 0000:06:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.235897] PCI: CLS 64 bytes, default 64
[    0.235931] Trying to unpack rootfs image as initramfs...
[    0.522559] Freeing initrd memory: 26696K (ffff880034bcc000 - ffff8800365de000)
[    0.522563] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.522565] software IO TLB [mem 0xcceeb000-0xd0eeb000] (64MB) mapped at [ffff8800cceeb000-ffff8800d0eeafff]
[    0.522722] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
[    0.522727] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
[    0.522731] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
[    0.522736] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
[    0.522777] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.522778] Scanning for low memory corruption every 60 seconds
[    0.522932] Initialise system trusted keyring
[    0.522961] audit: initializing netlink socket (disabled)
[    0.522968] type=2000 audit(1398375498.516:1): initialized
[    0.541414] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.542299] VFS: Disk quotas dquot_6.5.2
[    0.542323] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.542563] fuse init (API version 7.22)
[    0.542606] msgmni has been set to 23949
[    0.542634] Key type big_key registered
[    0.542907] Key type asymmetric registered
[    0.542908] Asymmetric key parser 'x509' registered
[    0.542930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.542954] io scheduler noop registered
[    0.542955] io scheduler deadline registered (default)
[    0.542969] io scheduler cfq registered
[    0.543097] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.543423] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.543432] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.543457] efifb: probing for efifb
[    0.543603] efifb: framebuffer at 0xf1000000, mapped to 0xffffc90005b80000, using 1920k, total 1920k
[    0.543604] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.543605] efifb: scrolling: redraw
[    0.543606] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.544421] Console: switching to colour frame buffer device 100x37
[    0.545179] fb0: EFI VGA frame buffer device
[    0.545186] intel_idle: MWAIT substates: 0x1120
[    0.545187] intel_idle: v0.4 model 0x3A
[    0.545188] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.545243] ipmi message handler version 39.2
[    0.545286] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.545289] ACPI: Power Button [PWRB]
[    0.545311] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.545313] ACPI: Power Button [PWRF]
[    0.545350] ACPI: Fan [FAN0] (off)
[    0.545366] ACPI: Fan [FAN1] (off)
[    0.545379] ACPI: Fan [FAN2] (off)
[    0.545394] ACPI: Fan [FAN3] (off)
[    0.545407] ACPI: Fan [FAN4] (off)
[    0.552027] thermal LNXTHERM:00: registered as thermal_zone0
[    0.552029] ACPI: Thermal Zone [TZ00] (28 C)
[    0.552156] thermal LNXTHERM:01: registered as thermal_zone1
[    0.552157] ACPI: Thermal Zone [TZ01] (30 C)
[    0.552173] GHES: HEST is not enabled!
[    0.552225] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.572649] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.573642] Linux agpgart interface v0.103
[    0.574368] brd: module loaded
[    0.574712] loop: module loaded
[    0.574905] libphy: Fixed MDIO Bus: probed
[    0.574950] tun: Universal TUN/TAP device driver, 1.6
[    0.574951] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.574972] PPP generic driver version 2.4.2
[    0.574997] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.574999] ehci-pci: EHCI PCI platform driver
[    0.575085] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.575089] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.575100] ehci-pci 0000:00:1a.0: debug port 2
[    0.579002] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.579014] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7418000
[    0.587822] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.587851] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.587852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.587853] usb usb1: Product: EHCI Host Controller
[    0.587855] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    0.587856] usb usb1: SerialNumber: 0000:00:1a.0
[    0.587938] hub 1-0:1.0: USB hub found
[    0.587943] hub 1-0:1.0: 2 ports detected
[    0.588078] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.588081] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.588091] ehci-pci 0000:00:1d.0: debug port 2
[    0.591977] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.591987] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7417000
[    0.603827] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.603856] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.603857] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.603858] usb usb2: Product: EHCI Host Controller
[    0.603859] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    0.603860] usb usb2: SerialNumber: 0000:00:1d.0
[    0.603974] hub 2-0:1.0: USB hub found
[    0.603981] hub 2-0:1.0: 2 ports detected
[    0.604055] ehci-platform: EHCI generic platform driver
[    0.604060] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.604061] ohci-pci: OHCI PCI platform driver
[    0.604066] ohci-platform: OHCI generic platform driver
[    0.604069] uhci_hcd: USB Universal Host Controller Interface driver
[    0.604149] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.604153] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.604229] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.604245] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.604293] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.604294] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.604295] usb usb3: Product: xHCI Host Controller
[    0.604297] usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    0.604298] usb usb3: SerialNumber: 0000:00:14.0
[    0.604408] hub 3-0:1.0: USB hub found
[    0.604418] hub 3-0:1.0: 4 ports detected
[    0.604625] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.604627] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.604654] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.604655] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.604656] usb usb4: Product: xHCI Host Controller
[    0.604657] usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    0.604659] usb usb4: SerialNumber: 0000:00:14.0
[    0.604769] hub 4-0:1.0: USB hub found
[    0.604779] hub 4-0:1.0: 4 ports detected
[    0.611984] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.611988] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[    0.612177] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.612240] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.612241] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.612242] usb usb5: Product: xHCI Host Controller
[    0.612243] usb usb5: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    0.612244] usb usb5: SerialNumber: 0000:03:00.0
[    0.612353] hub 5-0:1.0: USB hub found
[    0.612361] hub 5-0:1.0: 1 port detected
[    0.612397] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.612399] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[    0.612439] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    0.612440] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.612441] usb usb6: Product: xHCI Host Controller
[    0.612442] usb usb6: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    0.612443] usb usb6: SerialNumber: 0000:03:00.0
[    0.612552] hub 6-0:1.0: USB hub found
[    0.612564] hub 6-0:1.0: 4 ports detected
[    0.619926] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.620327] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.620331] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.620502] mousedev: PS/2 mouse device common for all mice
[    0.620737] rtc_cmos 00:05: RTC can wake from S4
[    0.620845] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.620870] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.620902] device-mapper: uevent: version 1.0.3
[    0.620984] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.620988] ledtrig-cpu: registered to indicate activity on CPUs
[    0.620989] EFI Variables Facility v0.08 2004-May-17
[    0.626213] TCP: cubic registered
[    0.626258] NET: Registered protocol family 10
[    0.626360] NET: Registered protocol family 17
[    0.626366] Key type dns_resolver registered
[    0.626574] Loading compiled-in X.509 certificates
[    0.627158] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[    0.627164] registered taskstats version 1
[    0.629261] Key type trusted registered
[    0.630844] Key type encrypted registered
[    0.632595] AppArmor: AppArmor sha1 policy hashing enabled
[    0.632597] IMA: No TPM chip found, activating TPM-bypass!
[    0.632864] regulator-dummy: disabling
[    0.633016]   Magic number: 10:600:652
[    0.633064] acpi LNXCPU:05: hash matches
[    0.633136] rtc_cmos 00:05: setting system clock to 2014-04-24 21:38:18 UTC (1398375498)
[    0.633604] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.633605] EDD information not available.
[    0.633630] PM: Hibernation image not present or could not be loaded.
[    0.634262] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    0.634263] Write protecting the kernel read-only data: 12288k
[    0.635759] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    0.637008] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[    0.646198] systemd-udevd[115]: starting version 204
[    0.657860] wmi: Mapper loaded
[    0.663522] [drm] Initialized drm 1.1.0 20060810
[    0.663862] ahci 0000:00:1f.2: version 3.0
[    0.663952] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    0.663992] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    0.663994] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    0.673522] scsi0 : ahci
[    0.673572] scsi1 : ahci
[    0.673609] scsi2 : ahci
[    0.673652] scsi3 : ahci
[    0.673693] scsi4 : ahci
[    0.673758] alx 0000:06:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [90:2b:34:d3:01:61]
[    0.674954] scsi5 : ahci
[    0.674978] ata1: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416100 irq 43
[    0.674980] ata2: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416180 irq 43
[    0.674981] ata3: DUMMY
[    0.674982] ata4: DUMMY
[    0.674982] ata5: DUMMY
[    0.674983] ata6: DUMMY
[    0.675319] ahci 0000:07:00.0: irq 44 for MSI/MSI-X
[    0.675377] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.675379] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    0.675668] scsi6 : ahci
[    0.675707] scsi7 : ahci
[    0.675729] ata7: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 44
[    0.675732] ata8: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 44
[    0.676278] MXM: GUID detected in BIOS
[    0.676293] checking generic (f1000000 1e0000) vs hw (e8000000 8000000)
[    0.676294] checking generic (f1000000 1e0000) vs hw (f0000000 2000000)
[    0.676295] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
[    0.676305] Console: switching to colour dummy device 80x25
[    0.676580] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e4000a2
[    0.676582] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK104 (NVE4)
[    0.676583] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[    0.677816] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    0.677821] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    0.677822] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    0.780014] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    0.780016] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[    0.780093] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    0.780095] nouveau  [   VBIOS][0000:01:00.0] version 80.04.47.00.0d
[    0.780279] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[    0.780286] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    0.780315] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[    0.780316] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[    0.780317] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    0.785198] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 987500uv
[    0.807996] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    0.808000] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[    0.808002] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    0.808025] nouveau  [     CLK][0000:01:00.0] 07: core 324 MHz memory 324 MHz
[    0.808050] nouveau  [     CLK][0000:01:00.0] 0a: core 324-862 MHz memory 810 MHz
[    0.808115] nouveau  [     CLK][0000:01:00.0] 0d: core 540-1346 MHz memory 3004 MHz
[    0.808196] nouveau  [     CLK][0000:01:00.0] 0f: core 540-1346 MHz memory 3004 MHz
[    0.808262] nouveau  [     CLK][0000:01:00.0] --: core 324 MHz memory 324 MHz
[    0.833354] [TTM] Zone  kernel: Available graphics memory: 6132574 kiB
[    0.833355] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    0.833356] [TTM] Initializing pool allocator
[    0.833359] [TTM] Initializing DMA pool allocator
[    0.833366] nouveau  [     DRM] VRAM: 2048 MiB
[    0.833367] nouveau  [     DRM] GART: 1048576 MiB
[    0.833370] nouveau  [     DRM] TMDS table version 2.0
[    0.833371] nouveau  [     DRM] DCB version 4.0
[    0.833373] nouveau  [     DRM] DCB outp 00: 01000f02 00020030
[    0.833374] nouveau  [     DRM] DCB outp 01: 02000f00 00000000
[    0.833375] nouveau  [     DRM] DCB outp 02: 08011f82 00020030
[    0.833376] nouveau  [     DRM] DCB outp 03: 02022f62 00020010
[    0.833377] nouveau  [     DRM] DCB outp 04: 04833fb6 0f420010
[    0.833378] nouveau  [     DRM] DCB outp 05: 04033f72 00020010
[    0.833379] nouveau  [     DRM] DCB conn 00: 00001030
[    0.833381] nouveau  [     DRM] DCB conn 01: 00020131
[    0.833382] nouveau  [     DRM] DCB conn 02: 00010261
[    0.833383] nouveau  [     DRM] DCB conn 03: 00002346
[    0.834241] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.834242] [drm] No driver support for vblank timestamp query.
[    0.843965] nouveau  [     DRM] MM: using COPY for buffer copies
[    0.903989] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.992044] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.994402] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    0.994407] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88030d579050), AE_NOT_FOUND (20131115/psparse-536)
[    0.994413] ata1.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    0.995267] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    0.995271] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88030d579050), AE_NOT_FOUND (20131115/psparse-536)
[    0.995278] ata1.00: configured for UDMA/100
[    0.996008] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.997320] scsi 0:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    0.997876] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    0.997880] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88030d5790c8), AE_NOT_FOUND (20131115/psparse-536)
[    0.998089] ata2.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[    0.998091] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.000084] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    1.000089] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88030d5790c8), AE_NOT_FOUND (20131115/psparse-536)
[    1.000290] ata2.00: configured for UDMA/133
[    1.000886] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.000888] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.001006] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.001047] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.001192] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[    1.001277] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.001301] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.001340] sd 1:0:0:0: [sda] Write Protect is off
[    1.001342] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.001353] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.004023] ata7: SATA link down (SStatus 0 SControl 300)
[    1.004074] ata8: SATA link down (SStatus 0 SControl 300)
[    1.011940] nouveau  [     DRM] allocated 1920x1080 fb: 0x80000, bo ffff880307a35800
[    1.012001] fbcon: nouveaufb (fb0) is primary device
[    1.035592]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    1.036176] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.036358] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.036359] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.036512] hub 1-1:1.0: USB hub found
[    1.036720] hub 1-1:1.0: 6 ports detected
[    1.066820] Console: switching to colour frame buffer device 240x67
[    1.068087] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    1.068088] nouveau 0000:01:00.0: registered panic notifier
[    1.068091] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[    1.148083] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.280492] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.280497] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.280758] hub 2-1:1.0: USB hub found
[    1.280835] hub 2-1:1.0: 8 ports detected
[    1.504214] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[    1.520224] tsc: Refined TSC clocksource calibration: 3403.348 MHz
[    1.522855] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
[    1.522860] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.522863] usb 3-2: Product: USB Receiver
[    1.522865] usb 3-2: Manufacturer: Logitech
[    1.525705] hidraw: raw HID events driver (C) Jiri Kosina
[    1.530201] usbcore: registered new interface driver usbhid
[    1.530203] usbhid: USB HID core driver
[    1.531960] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[    1.760509] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.777695] usb 4-1: New USB device found, idVendor=0781, idProduct=5581
[    1.777700] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.777703] usb 4-1: Product: SanDisk Ultra
[    1.777705] usb 4-1: Manufacturer: SanDisk
[    1.777707] usb 4-1: SerialNumber: A20037B6E6036F57
[    1.780250] usb-storage 4-1:1.0: USB Mass Storage device detected
[    1.780320] scsi8 : usb-storage 4-1:1.0
[    1.780577] usbcore: registered new interface driver usb-storage
[    1.888464] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[    1.905351] usb 5-1: New USB device found, idVendor=2109, idProduct=0811
[    1.905356] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.905359] usb 5-1: Product: USB2.0 Hub
[    1.905948] hub 5-1:1.0: USB hub found
[    1.906066] hub 5-1:1.0: 4 ports detected
[    1.984524] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    2.092780] usb 1-1.4: New USB device found, idVendor=0586, idProduct=341e
[    2.092784] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.092787] usb 1-1.4: Product: 802.11 n WLAN
[    2.092789] usb 1-1.4: Manufacturer: Ralink
[    2.092791] usb 1-1.4: SerialNumber: 1.0
[    2.164566] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[    2.264609] usb 1-1.5: New USB device found, idVendor=045e, idProduct=0291
[    2.264612] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.336641] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[    2.430422] usb 1-1.6: New USB device found, idVendor=09da, idProduct=054f
[    2.430425] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.430426] usb 1-1.6: Product: USB Device
[    2.430427] usb 1-1.6: Manufacturer: A4TECH
[    2.449015] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[    2.449018] EXT4-fs (sda7): write access will be enabled during recovery
[    2.520715] Switched to clocksource tsc
[    2.781887] scsi 8:0:0:0: Direct-Access     SanDisk  SanDisk Ultra    PMAP PQ: 0 ANSI: 6
[    2.782117] sd 8:0:0:0: Attached scsi generic sg2 type 0
[    2.782270] sd 8:0:0:0: [sdb] 30283008 512-byte logical blocks: (15.5 GB/14.4 GiB)
[    2.782574] sd 8:0:0:0: [sdb] Write Protect is off
[    2.782576] sd 8:0:0:0: [sdb] Mode Sense: 45 00 00 00
[    2.782865] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.799558] random: nonblocking pool is initialized
[    2.955205]  sdb: sdb1
[    2.956464] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[    3.497171] EXT4-fs (sda7): orphan cleanup on readonly fs
[    3.532237] EXT4-fs (sda7): 10 orphan inodes deleted
[    3.532238] EXT4-fs (sda7): recovery complete
[    3.645104] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    9.666167] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.895361] systemd-udevd[337]: starting version 204
[   10.394207] lp: driver loaded but no devices found
[   10.414961] ppdev: user-space parallel port driver
[   10.635412] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   10.635417] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.635419] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   10.635421] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.635422] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \LED_ 1 (20131115/utaddress-251)
[   10.635424] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
[   10.635426] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.635427] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.792691] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[   11.262229] kvm: disabled by bios
[   11.280495] kvm: disabled by bios
[   11.292239] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   11.292340] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   11.303855] autoconfig: line_outs=3 (0x24/0x25/0x26/0x0/0x0) type:line
[   11.303857]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.303858]    hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[   11.303859]    mono: mono_out=0x0
[   11.303859]    dig-out=0x2d/0x2e
[   11.303860]    inputs:
[   11.303861]      Front Mic=0x29
[   11.303862]      Rear Mic=0x2b
[   11.303863]      Line=0x2a
[   11.310470] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.310512] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.310543] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.310570] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.310599] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.310629] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   11.310659] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   11.310796] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[   11.310833] hda_intel: Disabling MSI
[   11.310837] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   11.310861] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   11.314110] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   11.449252] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input12
[   11.449335] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/input/input13
[   11.449432] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.4/input/input14
[   11.449498] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.6/input/input15
[   11.449538] usbcore: registered new interface driver xpad
[   11.452257] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16
[   11.452873] hid-generic 0003:09DA:054F.0004: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1a.0-1.6/input0
[   11.452988] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input17
[   11.453068] hid-generic 0003:09DA:054F.0005: input,hidraw2: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1a.0-1.6/input1
[   11.621133] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[   11.699143] cfg80211: Calling CRDA to update world regulatory domain
[   11.820340] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[   11.820430] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   11.820501] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[   11.820538] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   12.000528] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[   12.101431] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[   12.129565] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   12.150086] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.150265] usbcore: registered new interface driver rt2800usb
[   12.271086] type=1400 audit(1398364710.127:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=396 comm="apparmor_parser"
[   12.271091] type=1400 audit(1398364710.127:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=396 comm="apparmor_parser"
[   12.271094] type=1400 audit(1398364710.127:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
[   12.271101] type=1400 audit(1398364710.127:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=408 comm="apparmor_parser"
[   12.271106] type=1400 audit(1398364710.127:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
[   12.271108] type=1400 audit(1398364710.127:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   12.271385] type=1400 audit(1398364710.127:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=396 comm="apparmor_parser"
[   12.271389] type=1400 audit(1398364710.127:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=396 comm="apparmor_parser"
[   12.271397] type=1400 audit(1398364710.127:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
[   12.271400] type=1400 audit(1398364710.127:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[   12.304276] cfg80211: World regulatory domain updated:
[   12.304279] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.304280] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.304281] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.304282] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.304283] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.304284] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.936574] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   16.164617] init: failsafe main process (653) killed by TERM signal
[   17.922173] audit_printk_skb: 120 callbacks suppressed
[   17.922176] type=1400 audit(1398364715.775:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=952 comm="apparmor_parser"
[   17.923658] type=1400 audit(1398364715.779:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=954 comm="apparmor_parser"
[   17.923662] type=1400 audit(1398364715.779:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=954 comm="apparmor_parser"
[   17.923950] type=1400 audit(1398364715.779:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=954 comm="apparmor_parser"
[   18.297209] init: cups main process (964) killed by HUP signal
[   18.297218] init: cups main process ended, respawning
[   18.474019] Bluetooth: Core ver 2.17
[   18.474030] NET: Registered protocol family 31
[   18.474031] Bluetooth: HCI device and connection manager initialized
[   18.474037] Bluetooth: HCI socket layer initialized
[   18.474038] Bluetooth: L2CAP socket layer initialized
[   18.474040] Bluetooth: SCO socket layer initialized
[   18.741537] Bluetooth: RFCOMM TTY layer initialized
[   18.741546] Bluetooth: RFCOMM socket layer initialized
[   18.741549] Bluetooth: RFCOMM ver 1.11
[   18.746430] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.746432] Bluetooth: BNEP filters: protocol multicast
[   18.746436] Bluetooth: BNEP socket layer initialized
[   20.556439] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   20.627721] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   20.934904] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.935088] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.936421] alx 0000:06:00.0: irq 48 for MSI/MSI-X
[   20.936483] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.936618] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.698543] wlan0: authenticate with 00:1a:2b:96:9c:f6
[   22.737990] wlan0: send auth to 00:1a:2b:96:9c:f6 (try 1/3)
[   22.739848] wlan0: authenticated
[   22.739911] rt2800usb 1-1.4:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   22.740649] wlan0: associate with 00:1a:2b:96:9c:f6 (try 1/3)
[   22.744487] wlan0: RX AssocResp from 00:1a:2b:96:9c:f6 (capab=0x411 status=0 aid=5)
[   22.751345] wlan0: associated
[   22.751360] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.533983] init: plymouth-upstart-bridge main process ended, respawning
[   24.537212] init: plymouth-upstart-bridge main process (1122) terminated with status 1
[   24.537221] init: plymouth-upstart-bridge main process ended, respawning
[   48.550192] type=1400 audit(1398364746.402:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2099 comm="apparmor_parser"
[   48.550198] type=1400 audit(1398364746.402:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2099 comm="apparmor_parser"
[   48.550487] type=1400 audit(1398364746.402:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2099 comm="apparmor_parser"
[  108.522596] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input22
[  108.522946] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:14.0-2:1
[  108.524983] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input23
[  108.527539] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:14.0-2:2

dmesg | tail

Kod Seç

[   24.533983] init: plymouth-upstart-bridge main process ended, respawning
[   24.537212] init: plymouth-upstart-bridge main process (1122) terminated with status 1
[   24.537221] init: plymouth-upstart-bridge main process ended, respawning
[   48.550192] type=1400 audit(1398364746.402:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2099 comm="apparmor_parser"
[   48.550198] type=1400 audit(1398364746.402:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2099 comm="apparmor_parser"
[   48.550487] type=1400 audit(1398364746.402:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2099 comm="apparmor_parser"
[  108.522596] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input22
[  108.522946] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:14.0-2:1
[  108.524983] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input23
[  108.527539] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:14.0-2:2

/etc/sysctl.d/99-ipv6.conf dosyasının içinde belirttiğiniz gibi bir düzenleme yapamadım. Sanırım root yetkisi gerekiyor. Bunun için "sudo pswwd root" komutu ile şifre güncelledim ama bu şifre ile login olmayı da becemeredim.

Atamertes · 24 Nisan 2014 - 22:44:16

Hocam ben sana alternatif bi çözüm önereyim aklında olsun

Bu kartlar 20tl civarı satılıyor, kendi kartını tamir edemezsen bunu takar kullanırsın.

if · 24 Nisan 2014 - 22:56:26

@emrr5,

Kod Seç

sudo -H gedit /etc/sysctl.d/99-ipv6.conf ile açıp oluşturabilirsiniz.

Kod Seç

echo "options rt2800usb nohwcrypt=1" | sudo tee /etc/modprobe.d/rt2800usb.conf
sudo modprobe -r rt2800usb
sudo modprobe rt2800usb

kommutları ardından durum nedir?

emrr5 · 24 Nisan 2014 - 23:48:23

Belirttiğiniz komut yardımı ile config dosyası içine satırları ekledim ama yine kaydettirmiyor.

Son ilettiğiniz komutlar ardından ortam iyice neşelendi

modprobe -r ile iligili komut ardından wifi bağlantısı kesildi. Sonrasında bilgisayar sürekli wifi ağına bağlanmaya çalışıp kesiliyor. İlginç bir kısır döngü içine girdi.

Atamertes öneri için teşekkür ederim ancak şu anki ürünümle daha önceki bir çok linux sürümünde bir sorun yaşamadım. Dolayısıyla son sürümde bir sorundan kaynaklandığını düşünüyorum.

if · 24 Nisan 2014 - 23:53:58

Son komuttan sonra tekrar bağlanması gerekti ağa. Bağlanamadı mı?

emrr5 · 25 Nisan 2014 - 07:27:08

Son komutun o işe yaradığını tahmin ettim ama komut içinde rt2800 yazınca komut hatalı oluyor sanırım bende sonuna yine usb ekledim. O zaman herhangi bir hata olmadı. Terminal yerine el ile de baglan komutu vermeyi denedim. Ama her ikisinde de durum değişmedi. Surekli durum çubuğunda bağlanıyor derken belli bir süre sonra bağlantı kesildi uyarısı veriyor. Ardından otomatik olarak yeniden bağlanmaya çalışıyor.

if · 25 Nisan 2014 - 13:02:51

Beklemediğim bir sonuç oldu.

Kod Seç

sudo rm /etc/modprobe.d/rt2800usb.conf
sudo modprobe -r rt2800usb
sudo modprobe rt2800usb

ile eski haline getirin. Ağ şifrelemesi türünü Web yapınca bağlanmada sorun yaşıyor musunuz?

syagdiran · 25 Nisan 2014 - 14:02:43

Bu sorunu ben de takip edeyim. Benim de benzer bir sorunum var. Bilgisayarım Masaüstü fakat Wifi bağlantısı ile cep telefonuna internet erişimi sorunum var. Ben Nvidia ekran kartı ile alakalı olduğunu düşünüyorum . Zira Ubuntu'nun kendi sürücüsüyle bağlantı kopmuyor.
Bu arada siz hangi ekran kartını ve yazılımını kullanıyorsunuz? Kendi sürücüsünü kullanarak denemenizi önermek istiyorum. Belki işe yarar.

emrr5 · 25 Nisan 2014 - 21:43:38

Herkese (özellikle if) ilgilendindiğiniz için çok teşekkür ederim.

Linux Mint 16'da herhangi bir sorun yaşamayınca Ubuntu 14.04 LTS kurulumunu yeniden gerçekleştirdim ve şu an hiçbir sorunum yok.

Teşekkürler.

if · 25 Nisan 2014 - 22:02:49

Bir şey değil @emrr5. Yeniden kuruluma gidildiği durumlarda çözüldü etiketini vurmuyoruz konu başlığına, o yüzden kaldırdım fakat eklediğiniz için teşekkür ederim.

Yeni bir kullanıcı olmanıza rağmen sorununuzu sarih bir dille ifade ettiğiniz, konuyu açmadan önce araştırma yaptığınız, gerekli bilgileri uygun bir şekilde ilettiğiniz için sizi tebrik ederim. Böyle güzelce sorulmuş sorulara cevap vermek benim için bir zevk.

subtle48 · 03 Ekim 2014 - 12:23:19

Herkese merhaba.Forumda yeniyim.Lenovo b5400 laptopu geçen hafta sıfır almıştım ve free dos olan bilgisayarıma ubuntu 14.04 lts'yi yüklettim.en son 13.10 kullanmıştım eski dell inspironumda.neyse,touchpad,nvidia grafik sorunlarının yanısıra(onları çözdüm) wifi sorunu beni bayağı bir meşgul etti.işyeri sahibi olduğum ve uzun saatler çalışmak zorunda olduğum için tek tek uyguladığım adımları ve çıktılarını buraya yazmayacağım çünkü vaktim yok.şuradaki önergeleri takip ederek linux kernel 3.16.3'ü yükledim,eski kerneli kaldırdım,18 saat wifi yi test ettim ve bağlantının sağlam olduğunu gördüm. http://linuxg.net/how-to-install-kernel-3-16-3-on-ubuntu-14-10-utopic-unicorn-ubuntu-14-04-trusty-tahr-and-derivatives/
eski kerneli kaldırma işlemi ise(remove old kernels başlığı altında) şurada https://sites.google.com/site/easylinuxtipsproject/clean tabii synaptics menager'ı yüklemek gerekiyor önce,çünkü eski kerneli kaldırma oradan daha kolay oluyor.yeni kernel sürümünde realtek wifi sürücüsünün kerneli rlt8723be.ko olarak değişiyor ve şimdilik sorunsuz çalışmasını sağlıyor.yardımcı olabildiysem ne mutlu bana.ama en azından profesyonel bir ubuntu kullanıcısı olmamama rağmen bu iki url'deki adımlarla kendi işimi kendim hallettim.herkese selamlar.

Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Ekim 2014 - 15:20:08

Birkaç tüyo daha vermek isterim;1-modem arayüzünde mod 802.11n olarak seçtim 2-bant genişliğini 20 mhz yaptım 3-şifrelemeyi wpa2 olarak değiştirdim.Şu an modem arayüzümde laptopumun kablosuz hızı 65M olarak gözüküyor

if · 05 Ekim 2014 - 23:53:13

Geri dönül yaptığınız için teşekkür ederim @subtle48. Bu konuyu açan arkadaşla aynı aygıtı mı kullanıyorsunuz?

subtle48 · 06 Ekim 2014 - 14:53:42

Hayır sayın @if.Ben lenovo b5400 laptop kullanıyorum.Ama trusty'de realtek wireless driverların internete bağlantı sorunlarının çok yaygın olduğunu ingilizce forumları arşınlarken gördüm ve-benim de yaptığım- gibi linux-kerneli güncelledikten sonra çoğu rtl xxxx.be network menager kerneline sahip driverların bağlantılarının stabil hale geldiğini çok kullanıcıdan okuyup onayladıktan sonra kendim de uyguladım.Şimdi 5.gün,bağlantım hala sağlam.Bu konuyla alakası yok ama ben eski kernel ile bir sorun daha yaşamıştım;bilgisayarı kapat komutu verdikten sonra her 5 denemenin 3ünde bilgisayar komutu yeniden başlat gibi algılıyordu ve tekrar başlatılıyordu.Yüklediğim son kernel versiyonu o sorunu da halletti.Şimdi buraya yazarken linux kernelin 3.17 stable versiyonunun çıktığını da gördüm.Bir kaç gün bekleyip,ubuntu forumlarında bu kernelin benim açımdan sorun çıkarıp çıkarmayacağından emin olduktan sonra onu da yükleyeceğim,tabii eskisini kaldırıp.Herkese selamlar

özgürlük rüzgarı · 11 Aralık 2014 - 17:11:34

Merhaba;
Herkes meşgul biliyorum ama bir yıldır düzelmedi gitti. Geçen ay bilgisayarı 14,04 ubuntu ya yükseltim sorun çözüldü. Ama bir haftadır sorun tekrar etmeye başladı. Kablosuz ağımıda görmüyor. Önceleri gizli wi fi ağdan bağlanabiliyordum ama şimdi ondan da bağlanamıyorum.

Kod Seç

heartsmagic · 11 Aralık 2014 - 17:57:55

@özgürlük rüzgarı, senin sorununu bir yerlerde konuşmuş muyduk?

if · 11 Aralık 2014 - 21:00:17

@özgürlük rüzgarı, sorununuz için yeni bir konu açın.

Ubuntu Türkiye

Haberler:

Ubuntu - Kubuntu 14.04 LTS Wifi sorunu

emrr5

if

emrr5

Atamertes

if

emrr5

if

emrr5

if

syagdiran

emrr5

if

subtle48

if

subtle48

özgürlük rüzgarı

heartsmagic

if