"Sistem Programı Sorunu Saptandı"

Başlatan Conixcit, 17 Mart 2014 - 21:13:32

« önceki - sonraki »

0 Üyeler ve 6 Ziyaretçi konuyu incelemekte.

Conixcit

Merhaba arkadaşlar, Evimde 2 adet bilgisayar var biri masaüstü biri laptop. Masaüstünde zamanında Ubuntum vardı 1 yıl kadar kullandım fakat bazı yazılımlar yüzünde üzülerek windows'a döndüm.
Ama Linux aşığı olarak her zaman bir linux dağıtımı eksikliği hissediyordum. Elimdeki laptop eski bir laptop.
"HP Compaq 6710b"
Özellikleri :
Operating system installed
Genuine Windows Vista® Business
Processor
Intel® Core™2 Duo Processor T7300
• 2.00 GHz, 4 MB L2 cache, 800 MHz FSB
Compatible Operating Systems
FreeDOS, Windows XP Home and Windows XP Professional drivers available on www.hp.com (May vary by country) Certified: SuSe Linux Enterprise Desktop 10
Chipset
Mobile™ Intel® 965GM Express Chipset
Standard memory
1 GB (512 MB x 2)
Memory Upgrade
Upgradeable to 4096 MB maximum
Memory slots
2 SODIMM slots supporting dual channel memory
System features
Internal hard disk drive
160 GB
Hard disk drive speed
5400 RPM
CD-ROM and DVD
DVD+/-RW Dual Layer LightScribe
Multi-bay devices
Optional External Multibay II devices
Portability
Weight
Starting at 2.6 kg
Dimensions (w x d x h)
3.4 (at front) x 35.7 x 26.5 cm
Display size
15.4 inches diagonal
Connectivity
Wireless Technologies
WLAN 802.11a/b/g
Network interface
Broadcom NetLink Gigabit Ethernet PCI Controller (10/100/1000 NIC)
Expandability
Expansion slots
Slots available for additional devices: 1 Type I/II PC Card slot supports both 32-bit CardBus and 16-bit cards, 1 6-in-1 media reader
External I/O ports
4 USB 2.0 ports, VGA, stereo microphone in, stereo headphone/line out, Firewire (1394a), power connector, RJ-11, RJ-45, S-video TV out
Software
Software included
Adobe Acrobat Reader, HP Wireless Assistant, HP Mobile Printing Driver, Synaptics Touchpad Driver, HP ProtectTools Security Manager, Symantec Norton Internet Security, Sonic Digital Media Plus, HP Backup and Recovery Manager, Intervideo WinDVD player, HP Help and Support Center
Graphic / Audio
Graphic Subsystem Name
Intel® Graphics Media Accelerator X3100
Graphic Subsystem Video Card Memory
Up to 384-MB shared system memory

İlk olarak bu laptop'a Ubuntu 13.04 32 bit yükleyerek fazlamı yüklendim bilmiyorum. Ara sıra donmalar oluyor. Yaptığımda zaten sadece interenete girmek veya film izlemek.
Ama asıl sıkıntım Laptop'u her açtığımda "Sistem Programı Sorunu Saptandı" şeklinde hata almam. Bugüne kadar hiç takmadım. Çünkü laptopda sıkıntı yoktu. Halada bir problem yok ama sürekli çıkması. Hatta Ubuntuyu kurdum ardından bu çıktı yani sonradan gelen bir hata değil. Dedim herhalde birşeyler ters gidiyor. Bunun için artık çözüm bulalım dostlar buna.
_____________________-
Laptop 'u açtım : Hata geldi Sorunu raporla dedim.
Şifre istedi girdim. Sonra tekrar hata verdi "ubuntu 13.04 içsel bir hatayla karşılaştı."
Ayrıntıları göster dedim :


Ne yapmalıyım ?
Problem nedir ?

Conixcit


Elessar

terminalden dmesg komutunu verip çıkan raporu yazarsanız, eminim  arkadaşlar daha çok yardımcı olacaklardır.
USE="peace justice" emerge --newuse --update --deep world

if

@Conixcit, raporda ne yazıyordu? Launchpad bağlantısını geçer misiniz?

1 GB RAM az gelebilir. Aslında bu değeri düşürebilirsiniz de biraz uğraş ister.

heartsmagic

sudo rm -f /var/crash/*

ile o hatalardan kurtulman mümkün. Donmalar için bir şey diyemem, ona ayrıca bakmak gerekiyor. Nerede donuyor, ne yaparken donuyor gibi.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

Conixcit

Alıntı yapılan: Elessar - 19 Mart 2014 - 16:11:50
terminalden dmesg komutunu verip çıkan raporu yazarsanız, eminim  arkadaşlar daha çok yardımcı olacaklardır.
buyurun
[    0.736804] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.736810] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.736851] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
[    0.736888] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.736891] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.736894] usb usb4: Product: UHCI Host Controller
[    0.736897] usb usb4: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[    0.736900] usb usb4: SerialNumber: 0000:00:1a.1
[    0.737001] hub 4-0:1.0: USB hub found
[    0.737006] hub 4-0:1.0: 2 ports detected
[    0.737126] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.737131] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.737136] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.737165] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
[    0.737201] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.737204] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.737207] usb usb5: Product: UHCI Host Controller
[    0.737210] usb usb5: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[    0.737213] usb usb5: SerialNumber: 0000:00:1d.0
[    0.737312] hub 5-0:1.0: USB hub found
[    0.737318] hub 5-0:1.0: 2 ports detected
[    0.737427] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.737432] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.737440] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.737481] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
[    0.737516] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.737519] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.737522] usb usb6: Product: UHCI Host Controller
[    0.737525] usb usb6: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[    0.737528] usb usb6: SerialNumber: 0000:00:1d.1
[    0.737626] hub 6-0:1.0: USB hub found
[    0.737631] hub 6-0:1.0: 2 ports detected
[    0.737740] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.737745] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.737750] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.737781] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[    0.737816] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.737820] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.737822] usb usb7: Product: UHCI Host Controller
[    0.737825] usb usb7: Manufacturer: Linux 3.8.0-35-generic uhci_hcd
[    0.737828] usb usb7: SerialNumber: 0000:00:1d.2
[    0.737927] hub 7-0:1.0: USB hub found
[    0.737931] hub 7-0:1.0: 2 ports detected
[    0.738123] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
[    0.739798] i8042: Detected active multiplexing controller, rev 1.1
[    0.740470] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.740476] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.740506] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.740529] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.740553] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.740664] mousedev: PS/2 mouse device common for all mice
[    0.740830] rtc_cmos 00:06: RTC can wake from S4
[    0.740983] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.741022] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.741161] device-mapper: uevent: version 1.0.3
[    0.741228] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    0.741249] EISA: Probing bus 0 at eisa.0
[    0.741251] EISA: Cannot allocate resource for mainboard
[    0.741253] Cannot allocate resource for EISA slot 1
[    0.741255] Cannot allocate resource for EISA slot 2
[    0.741257] Cannot allocate resource for EISA slot 3
[    0.741259] Cannot allocate resource for EISA slot 4
[    0.741261] Cannot allocate resource for EISA slot 5
[    0.741263] Cannot allocate resource for EISA slot 6
[    0.741265] Cannot allocate resource for EISA slot 7
[    0.741267] Cannot allocate resource for EISA slot 8
[    0.741268] EISA: Detected 0 cards.
[    0.741279] cpufreq-nforce2: No nForce2 chipset.
[    0.741319] cpuidle: using governor ladder
[    0.741369] cpuidle: using governor menu
[    0.741373] ledtrig-cpu: registered to indicate activity on CPUs
[    0.741375] EFI Variables Facility v0.08 2004-May-17
[    0.741557] ashmem: initialized
[    0.741702] TCP: cubic registered
[    0.741828] NET: Registered protocol family 10
[    0.742046] NET: Registered protocol family 17
[    0.742058] Key type dns_resolver registered
[    0.742236] Using IPI No-Shortcut mode
[    0.742316] Loading module verification certificates
[    0.747042] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: bab43694c655e6aee9fceadd34ffb05cf4363bc5'
[    0.747059] registered taskstats version 1
[    0.749983] Key type trusted registered
[    0.752586] Key type encrypted registered
[    0.753522] ACPI: Battery Slot [C23B] (battery present)
[    0.753597] ACPI: Battery Slot [C23A] (battery absent)
[    0.755932] rtc_cmos 00:06: setting system clock to 2014-03-20 13:06:41 UTC (1395320801)
[    0.760723] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.760726] EDD information not available.
[    0.762276] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.872357] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
[    0.888236] ata1.00: configured for MWDMA2
[    1.049378] isapnp: No Plug & Play device found
[    1.052956] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20L  NC08 PQ: 0 ANSI: 5
[    1.057824] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.057827] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.057971] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.058114] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.058294] Freeing unused kernel memory: 792k freed
[    1.058635] Write protecting the kernel text: 6264k
[    1.058724] Write protecting the kernel read-only data: 2484k
[    1.058726] NX-protecting the kernel data: 3976k
[    1.073973] udevd[101]: starting version 175
[    1.195416] pps_core: LinuxPPS API ver. 1 registered
[    1.195420] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.195924] Disabling lock debugging due to kernel taint
[    1.196612] ahci 0000:00:1f.2: version 3.0
[    1.196688] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.196736] ahci: SSS flag set, parallel bus scan disabled
[    1.196761] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    1.196766] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[    1.196772] ahci 0000:00:1f.2: setting latency timer to 64
[    1.209719] scsi2 : ahci
[    1.212243] scsi3 : ahci
[    1.214291] scsi4 : ahci
[    1.214382] ata3: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 44
[    1.214385] ata4: DUMMY
[    1.214387] ata5: DUMMY
[    1.217396] PTP clock support registered
[    1.235067] tg3.c:v3.128 (December 03, 2012)
[    1.308095] firewire_ohci 0000:02:04.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.316013] tg3 0000:18:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
[    1.376012] tg3 0000:18:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
[    1.436013] tg3 0000:18:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
[    1.436890] tg3 0000:18:00.0 eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:94:a6:30
[    1.436894] tg3 0000:18:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    1.436898] tg3 0000:18:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.436901] tg3 0000:18:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.532075] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.542890] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.542895] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.542971] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[    1.542975] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.552509] ata3.00: ATA-8: SAMSUNG HM161HI, 2AC101C4, max UDMA/133
[    1.552513] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.563306] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.563311] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.563388] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[    1.563391] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.572925] ata3.00: configured for UDMA/133
[    1.573111] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM161HI  2AC1 PQ: 0 ANSI: 5
[    1.573300] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.573304] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.573362] sd 2:0:0:0: [sda] Write Protect is off
[    1.573366] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.573405] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.624943]  sda: sda1 sda2 < sda5 >
[    1.625404] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.680029] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    1.808191] firewire_core 0000:02:04.1: created device fw0: GUID 00023f9929dd0b10, S400
[    1.835913] usb 4-1: New USB device found, idVendor=03f0, idProduct=1e1d
[    1.835917] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.835921] usb 4-1: Product: HP hs2300 HSDPA Broadband Wireless Module
[    1.835924] usb 4-1: Manufacturer: HP
[    1.962386] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.962391] EXT4-fs (sda1): write access will be enabled during recovery
[    2.080032] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    2.243214] usb 5-2: New USB device found, idVendor=08ff, idProduct=2580
[    2.243219] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.243222] usb 5-2: Product: Fingerprint Sensor
[    3.327021] EXT4-fs (sda1): orphan cleanup on readonly fs
[    3.327032] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 271193
[    3.327098] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505058
[    3.327134] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505057
[    3.350173] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 262512
[    3.373669] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 262703
[    3.414615] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1442238
[    3.414857] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1442237
[    3.414878] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1441973
[    3.444756] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505052
[    3.444783] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505050
[    3.444803] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505049
[    3.444823] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505048
[    3.444854] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505045
[    3.444873] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1442119
[    3.462414] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1442362
[    3.480318] EXT4-fs (sda1): 15 orphan inodes deleted
[    3.480321] EXT4-fs (sda1): recovery complete
[    3.671227] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.138371] Adding 1038332k swap on /dev/sda5.  Priority:-1 extents:1 across:1038332k
[   13.309795] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.362902] udevd[368]: starting version 175
[   13.707027] type=1400 audit(1395320814.444:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=461 comm="apparmor_parser"
[   13.707530] type=1400 audit(1395320814.444:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
[   13.707804] type=1400 audit(1395320814.444:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
[   13.709336] type=1400 audit(1395320814.448:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=500 comm="apparmor_parser"
[   13.709840] type=1400 audit(1395320814.448:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser"
[   13.710115] type=1400 audit(1395320814.448:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser"
[   13.782234] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[   13.785020] lp: driver loaded but no devices found
[   13.837050] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C003.C004.C0D2 1 (20121018/utaddress-251)
[   13.837059] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.837064] ACPI Warning: 0x00001130-0x0000113f SystemIO conflicts with Region \_SB_.C003.C004.C0E4 1 (20121018/utaddress-251)
[   13.837069] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.837072] ACPI Warning: 0x00001100-0x0000112f SystemIO conflicts with Region \_SB_.C003.C004.C0E4 1 (20121018/utaddress-251)
[   13.837076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.837078] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.859403] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[   13.881632] cfg80211: Calling CRDA to update world regulatory domain
[   13.955163] lib80211: common routines for IEEE802.11 drivers
[   13.955168] lib80211_crypt: registered algorithm 'NULL'
[   13.956195] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.965792] wl: module license 'MIXED/Proprietary' taints kernel.
[   13.978781] [drm] Initialized drm 1.1.0 20060810
[   14.034423] malloc in abgphy done
[   14.035167] tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.036021] kvm: disabled by bios
[   14.040615] wmi: Mapper loaded
[   14.064730] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0]
[   14.090115] hp_accel: hardware type NC6710x found
[   14.090752] lis3lv02d: 12 bits sensor found
[   14.092560] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[   14.108477] lib80211_crypt: registered algorithm 'TKIP'
[   14.151687] usbcore: registered new interface driver usbserial
[   14.152609] usbcore: registered new interface driver usbserial_generic
[   14.153490] usbserial: USB Serial support registered for generic
[   14.165880] usbcore: registered new interface driver sierra
[   14.166760] usbserial: USB Serial support registered for Sierra USB modem
[   14.167599] sierra 4-1:1.0: Sierra USB modem converter detected
[   14.169141] usb 4-1: Sierra USB modem converter now attached to ttyUSB0
[   14.169328] usb 4-1: Sierra USB modem converter now attached to ttyUSB1
[   14.169507] usb 4-1: Sierra USB modem converter now attached to ttyUSB2
[   14.192825] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 16
[   14.192832] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[   14.192836] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   14.192846] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[   14.192850] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff:
[   14.194498]  excluding 0x7000-0x70ff 0x7400-0x74ff
[   14.210700] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff]
[   14.210706] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff:
[   14.210709]  excluding 0xe4200000-0xe423ffff
[   14.210723] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
[   14.210727] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff:
[   14.210739]  excluding 0x40000000-0x43ffffff
[   14.227851] i915 0000:00:02.0: setting latency timer to 64
[   14.235699] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[   14.235715] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.235717] [drm] Driver supports precise vblank timestamp query.
[   14.235762] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   14.260167] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input4
[   14.273530] ppdev: user-space parallel port driver
[   14.273879] eth1: Broadcom BCM4311 802.11 Hybrid Wireless Controller 6.20.155.1 (r326264)
[   14.281127] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   14.282356]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[   14.283264] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   14.283725]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   14.284812] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   14.285527]  clean.
[   14.285549] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   14.286343]  clean.
[   14.286377] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   14.286384]  excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[   14.286414] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   14.286432]  clean.
[   14.286452] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   14.286469]  clean.
[   14.286488] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   14.289276]  clean.
[   14.332120] tpm_tis 00:02: Adjusting TPM timeout parameters.
[   14.336773] input: HP WMI hotkeys as /devices/virtual/input/input5
[   14.391153] cfg80211: World regulatory domain updated:
[   14.391158] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.391161] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.391164] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.391166] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.391168] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.391171] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.393995] [drm] initialized overlay support
[   14.497732] fbcon: inteldrmfb (fb0) is primary device
[   14.605478] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 240405
[   14.605483] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[   14.646463] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   14.930985] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.176142] Console: switching to colour frame buffer device 160x50
[   15.180666] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.180667] i915 0000:00:02.0: registered panic notifier
[   15.205543] init: failsafe main process (878) killed by TERM signal
[   15.244073] tpm_tis 00:02: TPM is disabled/deactivated (0x7)
[   15.249013] parport_pc 00:01: reported by Plug and Play ACPI
[   15.249094] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   15.297722] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20121018/exoparg2-418)
[   15.297738] ACPI Error: Method parse/execution failed [\_SB_.C003.C098._DOD] (Node f5c2a588), AE_AML_PACKAGE_LIMIT (20121018/psparse-537)
[   15.297749] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20121018/video-1211)
[   15.298480] acpi device:00: registered as cooling_device7
[   15.298767] ACPI: Video Device [C098] (multi-head: yes  rom: no  post: no)
[   15.298828] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   15.298957] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.299078] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   15.342342] lp0: using parport0 (interrupt-driven).
[   15.443023] Bluetooth: Core ver 2.16
[   15.443552] NET: Registered protocol family 31
[   15.443555] Bluetooth: HCI device and connection manager initialized
[   15.443904] Bluetooth: HCI socket layer initialized
[   15.443909] Bluetooth: L2CAP socket layer initialized
[   15.443917] Bluetooth: SCO socket layer initialized
[   15.465853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.465858] Bluetooth: BNEP filters: protocol multicast
[   15.465869] Bluetooth: BNEP socket layer initialized
[   15.486510] Bluetooth: RFCOMM TTY layer initialized
[   15.486525] Bluetooth: RFCOMM socket layer initialized
[   15.486528] Bluetooth: RFCOMM ver 1.11
[   15.656882] hp_wmi: Unknown event_id - 0 - 0x0
[   15.919117] init: avahi-cups-reload main process (964) terminated with status 1
[   15.926830] type=1400 audit(1395320816.664:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=975 comm="apparmor_parser"
[   15.927372] type=1400 audit(1395320816.664:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=975 comm="apparmor_parser"
[   17.327987] tg3 0000:18:00.0: irq 47 for MSI/MSI-X
[   17.366927] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.367521] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.037531] type=1400 audit(1395320818.776:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1050 comm="apparmor_parser"
[   18.037934] type=1400 audit(1395320818.776:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1050 comm="apparmor_parser"
[   19.844163] cfg80211: Calling CRDA for country: TR
[   19.849591] cfg80211: Regulatory domain changed to country: TR
[   19.849596] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.849599] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   19.849601] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   19.849603] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   37.386214] init: modemmanager main process (933) killed by ABRT signal
[   37.386250] init: modemmanager main process ended, respawning
[   37.397678] init: modemmanager main process (1853) terminated with status 255
[   37.397711] init: modemmanager main process ended, respawning
[   37.410050] init: modemmanager main process (1855) terminated with status 255
[   37.410082] init: modemmanager main process ended, respawning
[   37.422412] init: modemmanager main process (1857) terminated with status 255
[   37.422448] init: modemmanager main process ended, respawning
[   37.432689] init: modemmanager main process (1859) terminated with status 255
[   37.432724] init: modemmanager main process ended, respawning
[   37.443400] init: modemmanager main process (1861) terminated with status 255
[   37.443438] init: modemmanager main process ended, respawning
[   37.453569] init: modemmanager main process (1863) terminated with status 255
[   37.453605] init: modemmanager main process ended, respawning
[   37.463791] init: modemmanager main process (1865) terminated with status 255
[   37.463827] init: modemmanager main process ended, respawning
[   37.474046] init: modemmanager main process (1867) terminated with status 255
[   37.474078] init: modemmanager main process ended, respawning
[   37.484376] init: modemmanager main process (1869) terminated with status 255
[   37.484411] init: modemmanager main process ended, respawning
[   37.493743] init: modemmanager main process (1871) terminated with status 255
[   37.493779] init: modemmanager respawning too fast, stopped
[ 2391.056132] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 2391.208660] usb 2-3: New USB device found, idVendor=0930, idProduct=0b03
[ 2391.208673] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2391.208682] usb 2-3: Product: USB 2.5"-HDD
[ 2391.208689] usb 2-3: Manufacturer: TOSHIBA
[ 2391.208695] usb 2-3: SerialNumber: 00225A5b
[ 2392.042608] Initializing USB Mass Storage driver...
[ 2392.042921] scsi5 : usb-storage 2-3:1.0
[ 2392.043136] usbcore: registered new interface driver usb-storage
[ 2392.043141] USB Mass Storage support registered.
[ 2393.045360] scsi 5:0:0:0: Direct-Access     TOSHIBA  USB 2.5"-HDD     100  PQ: 0 ANSI: 2
[ 2393.047308] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2393.048393] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2393.053377] sd 5:0:0:0: [sdb] Write Protect is off
[ 2393.053391] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 2393.056150] sd 5:0:0:0: [sdb] No Caching mode page found
[ 2393.056162] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2393.063898] sd 5:0:0:0: [sdb] No Caching mode page found
[ 2393.063911] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2393.128175]  sdb: sdb1
[ 2393.134638] sd 5:0:0:0: [sdb] No Caching mode page found
[ 2393.134642] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2393.134647] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2404.665543] systemd-hostnamed[3941]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2496.856091] usb 2-3: USB disconnect, device number 3
[ 2496.872125] sd 5:0:0:0: [sdb] Unhandled error code
[ 2496.872131] sd 5:0:0:0: [sdb] 
[ 2496.872133] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2496.872136] sd 5:0:0:0: [sdb] CDB:
[ 2496.872139] Write(10): 2a 00 0a f5 b5 67 00 00 f0 00
[ 2496.872151] end_request: I/O error, dev sdb, sector 183874919
[ 2496.872156] quiet_error: 60 callbacks suppressed
[ 2496.872159] Buffer I/O error on device sdb1, logical block 22984357
[ 2496.872161] lost page write due to I/O error on sdb1
[ 2496.872168] Buffer I/O error on device sdb1, logical block 22984358
[ 2496.872170] lost page write due to I/O error on sdb1
[ 2496.872173] Buffer I/O error on device sdb1, logical block 22984359
[ 2496.872175] lost page write due to I/O error on sdb1
[ 2496.872178] Buffer I/O error on device sdb1, logical block 22984360
[ 2496.872180] lost page write due to I/O error on sdb1
[ 2496.872183] Buffer I/O error on device sdb1, logical block 22984361
[ 2496.872185] lost page write due to I/O error on sdb1
[ 2496.872189] Buffer I/O error on device sdb1, logical block 22984362
[ 2496.872191] lost page write due to I/O error on sdb1
[ 2496.872194] Buffer I/O error on device sdb1, logical block 22984363
[ 2496.872196] lost page write due to I/O error on sdb1
[ 2496.872199] Buffer I/O error on device sdb1, logical block 22984364
[ 2496.872201] lost page write due to I/O error on sdb1
[ 2496.872204] Buffer I/O error on device sdb1, logical block 22984365
[ 2496.872206] lost page write due to I/O error on sdb1
[ 2496.872209] Buffer I/O error on device sdb1, logical block 22984366
[ 2496.872211] lost page write due to I/O error on sdb1
[ 2496.872752] sd 5:0:0:0: [sdb] Unhandled error code
[ 2496.872754] sd 5:0:0:0: [sdb] 
[ 2496.872756] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2496.872759] sd 5:0:0:0: [sdb] CDB:
[ 2496.872761] Write(10): 2a 00 0a f5 b6 57 00 00 f0 00
[ 2496.872771] end_request: I/O error, dev sdb, sector 183875159
[ 2536.016559] Monitor-Mwait will be used to enter C-2 state
[ 2536.016580] Monitor-Mwait will be used to enter C-3 state

heartsmagic

Benim önerimi denedin mi?

Bu arada, dmesg çıktında bir disk için girdi/çıktı hatası veriyor. Pek iç açıcı bir durum değil. sdb dediği disk hangi diskin bilmiyorum ancak sıhhatini bir denetlemen gerekebilir.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

Conixcit

Alıntı yapılan: heartsmagic - 20 Mart 2014 - 15:16:47
sudo rm -f /var/crash/*

ile o hatalardan kurtulman mümkün. Donmalar için bir şey diyemem, ona ayrıca bakmak gerekiyor. Nerede donuyor, ne yaparken donuyor gibi.
yazdım ama ardından hemen bu çıktı



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 20 Mart 2014 - 16:03:24

Alıntı yapılan: heartsmagic - 20 Mart 2014 - 16:01:08
Benim önerimi denedin mi?

Bu arada, dmesg çıktında bir disk için girdi/çıktı hatası veriyor. Pek iç açıcı bir durum değil. sdb dediği disk hangi diskin bilmiyorum ancak sıhhatini bir denetlemen gerekebilir.
denedim + taşınabilir bir harddisc'im var. O dur sanırım

heartsmagic

ls -l /var/crash/

çıktısı ne diyor peki. Hata veren neymiş merak ettim.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

Conixcit

Alıntı yapılan: heartsmagic - 20 Mart 2014 - 16:27:41
ls -l /var/crash/

çıktısı ne diyor peki. Hata veren neymiş merak ettim.
:~$ ls -l /var/crash/
toplam 196
-rw-r----- 1 root whoopsie 197302 Mar 20 15:54 _usr_sbin_modem-manager.0.crash

heartsmagic

İnternete USB "dongle" türü bir şeyle mi bağlanıyorsun?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.