[Çözüldü] RTL8191SEvB Kablosuz Bağlantı Sorunu

[yakusha]

İlkoukul 3. sınıfa giden yeğenimin laptopuna karne hediyesi niyetine Ubuntu Gnome kuruyorum...

Lakin Wi-fi / Kablosuz kısmında bir sıkıntı yaşıyorum.

Marka Exper, Çıktılar

Kod Seç Genişlet

ertugrul@ertsx:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=13.10
DISTRIB_CODENAME=saucy
DISTRIB_DESCRIPTION="Ubuntu 13.10"

Kod Seç Genişlet

ertugrul@ertsx:~$ uname -a
Linux ertsx 3.11.0-17-generic #30-Ubuntu SMP Fri Jan 17 22:25:25 UTC 2014 i686 i686 i686 GNU/Linux

Kod Seç Genişlet

ertugrul@ertsx:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)


Kod Seç Genişlet

ertugrul@ertsx:~$ lsusb
Bus 002 Device 004: ID 15d9:0a4f Trust International B.V.
Bus 002 Device 003: ID 174f:1442 Syntek
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Kod Seç Genişlet

ertugrul@ertsx:~$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
3: hp-wwan: Wireless WAN
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

ertugrul@ertsx:~$ sudo lshw -C network
  *-network ETKİSİZLEŞTİRİLDİ
       açıklama: Kablosuz arayüz
       ürün: RTL8191SEvB Wireless LAN Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: wlan0
       sürüm: 10
       serial: 74:31:70:74:93:b2
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8192se driverversion=3.11.0-17-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       kaynaklar: irq:17 ioport:3000(boyut=256) bellek:94400000-94403fff
  *-network
       açıklama: Eternet interface
       ürün: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       mantıksal ad: eth0
       sürüm: 06
       serial: dc:0e:a1:28:ea:75
       boyut: 100Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       kaynaklar: irq:40 ioport:2000(boyut=256) bellek:92404000-92404fff bellek:92400000-92403fff


Kod Seç Genişlet

ertugrul@ertsx:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr dc:0e:a1:28:ea:75 
          inet addr:192.168.1.4  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::de0e:a1ff:fe28:ea75/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1918 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1650 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1939058 (1.9 MB)  TX bytes:271327 (271.3 KB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:285 errors:0 dropped:0 overruns:0 frame:0
          TX packets:285 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:27281 (27.2 KB)  TX bytes:27281 (27.2 KB)


Kod Seç Genişlet

ertugrul@ertsx:~$ iwconfig
wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
         
lo        no wireless extensions.

eth0      no wireless extensions.


Kod Seç Genişlet

ertugrul@ertsx:~$ iwlist scanning
wlan0     Failed to read scan data : Network is down

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.


Kod Seç Genişlet

ertugrul@ertsx:~$ lsmod
Module                  Size  Used by
parport_pc             31981  0
ppdev                  17391  0
rfcomm                 53664  0
bnep                   18959  2
bluetooth             323656  10 bnep,rfcomm
joydev                 17097  0
intel_powerclamp       14239  0
coretemp               13195  0
hp_wmi                 13702  0
sparse_keymap          13708  1 hp_wmi
uvcvideo               71309  0
snd_hda_codec_hdmi     40373  1
videobuf2_vmalloc      13048  1 uvcvideo
snd_hda_codec_realtek    50261  1
videobuf2_memops       13170  1 videobuf2_vmalloc
videobuf2_core         39125  1 uvcvideo
videodev              107508  2 uvcvideo,videobuf2_core
snd_hda_intel          42658  3
psmouse                90642  0
snd_hda_codec         164003  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
microcode              18894  0
serio_raw              13189  0
intel_ips              18055  0
snd_hwdep              13272  1 snd_hda_codec
wmi                    18590  1 hp_wmi
snd_pcm                89488  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
i915                  594442  3
snd_page_alloc         14230  2 snd_pcm,snd_hda_intel
snd_seq_midi           13132  0
snd_seq_midi_event     14475  1 snd_seq_midi
snd_rawmidi            25094  1 snd_seq_midi
snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi
drm_kms_helper         46867  1 i915
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              24447  2 snd_pcm,snd_seq
drm                   242400  4 i915,drm_kms_helper
snd                    60790  17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore              12600  1 snd
mei_me                 13933  0
i2c_algo_bit           13197  1 i915
lpc_ich                16864  0
mei                    66411  1 mei_me
video                  18777  1 i915
mac_hid                13037  0
arc4                   12536  2
rtl8192se              58091  0
rtl_pci                22177  1 rtl8192se
rtlwifi                52621  2 rtl_pci,rtl8192se
mac80211              517444  3 rtl_pci,rtlwifi,rtl8192se
cfg80211              401762  2 mac80211,rtlwifi
lp                     13299  0
parport                40795  3 lp,ppdev,parport_pc
hid_generic            12492  0
usbhid                 47361  0
hid                    87370  2 hid_generic,usbhid
ahci                   25579  4
r8169                  61562  0
libahci                26619  1 ahci
mii                    13654  1 r8169


DMES

Kod Seç Genişlet

[    2.279607] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[    2.279619] pci 0000:00:1f.2: reg 0x14: [io  0x505c-0x505f]
[    2.279632] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[    2.279643] pci 0000:00:1f.2: reg 0x1c: [io  0x5058-0x505b]
[    2.279655] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    2.279667] pci 0000:00:1f.2: reg 0x24: [mem 0x96405000-0x964057ff]
[    2.279738] pci 0000:00:1f.2: PME# supported from D3hot
[    2.279863] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    2.279887] pci 0000:00:1f.3: reg 0x10: [mem 0x96406000-0x964060ff 64bit]
[    2.279918] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    2.280067] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    2.280099] pci 0000:00:1f.6: reg 0x10: [mem 0x96404000-0x96404fff 64bit]
[    2.280379] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    2.280385] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    2.280390] pci 0000:00:1c.0:   bridge window [mem 0x95400000-0x963fffff]
[    2.280398] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    2.281312] pci 0000:02:00.0: [10ec:8172] type 00 class 0x028000
[    2.282233] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    2.282657] pci 0000:02:00.0: reg 0x14: [mem 0x94400000-0x94403fff]
[    2.286547] pci 0000:02:00.0: supports D1 D2
[    2.286549] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    2.287401] pci 0000:02:00.0: System wakeup disabled by ACPI
[    2.288147] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    2.288152] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    2.288157] pci 0000:00:1c.1:   bridge window [mem 0x94400000-0x953fffff]
[    2.288165] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    2.288320] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    2.288388] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    2.288503] pci 0000:03:00.0: reg 0x18: [mem 0x92404000-0x92404fff 64bit pref]
[    2.288556] pci 0000:03:00.0: reg 0x20: [mem 0x92400000-0x92403fff 64bit pref]
[    2.288873] pci 0000:03:00.0: supports D1 D2
[    2.288875] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.289359] pci 0000:03:00.0: System wakeup disabled by ACPI
[    2.289468] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    2.289474] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    2.289479] pci 0000:00:1c.2:   bridge window [mem 0x93400000-0x943fffff]
[    2.289487] pci 0000:00:1c.2:   bridge window [mem 0x92400000-0x933fffff 64bit pref]
[    2.289580] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    2.289594] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    2.289596] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    2.289598] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    2.289600] pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[    2.289628] pci_bus 0000:00: on NUMA node 0
[    2.290460] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    2.290527] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    2.290593] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    2.290659] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    2.290724] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    2.290789] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    2.290854] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    2.290918] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    2.290948] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    2.290952] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    2.290954] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    2.290993] PCI host bridge to bus 0000:7f
[    2.290996] pci_bus 0000:7f: root bus resource [bus 7f]
[    2.291003] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[    2.291051] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[    2.291101] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[    2.291146] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[    2.291190] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[    2.291235] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[    2.291289] pci_bus 0000:7f: on NUMA node 0
[    2.291778] ACPI: Enabled 7 GPEs in block 00 to 3F
[    2.291788] ACPI: \_SB_.PCI0: notify handler is installed
[    2.291874] ACPI: \_SB_.CPBG: notify handler is installed
[    2.291890] Found 2 acpi root devices
[    2.291940] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    2.292055] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    2.292060] vgaarb: loaded
[    2.292061] vgaarb: bridge control possible 0000:00:02.0
[    2.292261] SCSI subsystem initialized
[    2.292265] ACPI: bus type ATA registered
[    2.292315] libata version 3.00 loaded.
[    2.292336] ACPI: bus type USB registered
[    2.292357] usbcore: registered new interface driver usbfs
[    2.292366] usbcore: registered new interface driver hub
[    2.292390] usbcore: registered new device driver usb
[    2.292509] PCI: Using ACPI for IRQ routing
[    2.297413] PCI: pci_cache_line_size set to 64 bytes
[    2.297682] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    2.297684] e820: reserve RAM buffer [mem 0x7763f000-0x77ffffff]
[    2.297686] e820: reserve RAM buffer [mem 0x77800000-0x77ffffff]
[    2.297789] NetLabel: Initializing
[    2.297791] NetLabel:  domain hash size = 128
[    2.297792] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.297802] NetLabel:  unlabeled traffic allowed by default
[    2.297921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.297928] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    2.299955] Switched to clocksource hpet
[    2.306568] AppArmor: AppArmor Filesystem Enabled
[    2.306602] pnp: PnP ACPI init
[    2.306618] ACPI: bus type PNP registered
[    2.416038] pnp 00:00: [dma 4]
[    2.416069] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    2.416099] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    2.416246] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[    2.416251] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    2.416292] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    2.416342] system 00:04: [io  0x0680-0x069f] has been reserved
[    2.416345] system 00:04: [io  0x0800-0x080f] has been reserved
[    2.416347] system 00:04: [io  0x0810-0x0813] has been reserved
[    2.416349] system 00:04: [io  0xffff] has been reserved
[    2.416352] system 00:04: [io  0x0400-0x047f] could not be reserved
[    2.416354] system 00:04: [io  0x0500-0x057f] has been reserved
[    2.416357] system 00:04: [io  0x164e-0x164f] has been reserved
[    2.416360] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.416413] system 00:05: [io  0x06a0-0x06af] has been reserved
[    2.416418] system 00:05: [io  0x06b0-0x06ff] has been reserved
[    2.416421] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.416453] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.416534] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    2.416567] pnp 00:08: Plug and Play ACPI device, IDs AUI0216 SYN1e00 SYN0002 PNP0f13 (active)
[    2.416931] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.416935] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    2.416937] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.416940] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.416942] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[    2.416945] system 00:09: [mem 0x7c000000-0x7c000fff] has been reserved
[    2.416947] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.416950] system 00:09: [mem 0xfeb00000-0xfeb03fff] has been reserved
[    2.416952] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    2.416955] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    2.416958] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    2.416960] system 00:09: [mem 0x7c000000-0x7c000fff] has been reserved
[    2.416963] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.417169] pnp: PnP ACPI: found 10 devices
[    2.417171] ACPI: bus type PNP unregistered
[    2.417174] PnPBIOS: Disabled by ACPI PNP
[    2.453946] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    2.453951] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    2.453958] pci 0000:00:1c.0:   bridge window [mem 0x95400000-0x963fffff]
[    2.453964] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    2.453972] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    2.453976] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    2.453983] pci 0000:00:1c.1:   bridge window [mem 0x94400000-0x953fffff]
[    2.453988] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    2.453997] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    2.454001] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    2.454007] pci 0000:00:1c.2:   bridge window [mem 0x93400000-0x943fffff]
[    2.454012] pci 0000:00:1c.2:   bridge window [mem 0x92400000-0x933fffff 64bit pref]
[    2.454021] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    2.454376] pci 0000:00:1e.0: setting latency timer to 64
[    2.454382] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    2.454384] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    2.454386] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    2.454388] pci_bus 0000:00: resource 7 [mem 0x7c000000-0xfeafffff]
[    2.454391] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    2.454393] pci_bus 0000:01: resource 1 [mem 0x95400000-0x963fffff]
[    2.454395] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[    2.454398] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    2.454400] pci_bus 0000:02: resource 1 [mem 0x94400000-0x953fffff]
[    2.454402] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[    2.454405] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    2.454407] pci_bus 0000:03: resource 1 [mem 0x93400000-0x943fffff]
[    2.454409] pci_bus 0000:03: resource 2 [mem 0x92400000-0x933fffff 64bit pref]
[    2.454411] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    2.454414] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    2.454416] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    2.454418] pci_bus 0000:04: resource 7 [mem 0x7c000000-0xfeafffff]
[    2.454457] NET: Registered protocol family 2
[    2.454634] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    2.454658] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    2.454680] TCP: Hash tables configured (established 8192 bind 8192)
[    2.454700] TCP: reno registered
[    2.454703] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    2.454710] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    2.454775] NET: Registered protocol family 1
[    2.454789] pci 0000:00:02.0: Boot video device
[    2.484129] PCI: CLS 64 bytes, default 64
[    2.484171] Trying to unpack rootfs image as initramfs...
[    2.845250] Freeing initrd memory: 16660K (f5f66000 - f6fab000)
[    2.845333] Simple Boot Flag at 0x44 set to 0x1
[    2.845490] Scanning for low memory corruption every 60 seconds
[    2.845783] Initialise module verification
[    2.845835] audit: initializing netlink socket (disabled)
[    2.845850] type=2000 audit(1391063501.716:1): initialized
[    2.870914] bounce pool size: 64 pages
[    2.870924] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.872301] zbud: loaded
[    2.872366] VFS: Disk quotas dquot_6.5.2
[    2.872418] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.872978] fuse init (API version 7.22)
[    2.873073] msgmni has been set to 1720
[    2.873770] Key type asymmetric registered
[    2.873773] Asymmetric key parser 'x509' registered
[    2.873811] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.873855] io scheduler noop registered
[    2.873857] io scheduler deadline registered (default)
[    2.873888] io scheduler cfq registered
[    2.874160] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.874175] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.874242] intel_idle: MWAIT substates: 0x120
[    2.874244] intel_idle: v0.4 model 0x25
[    2.874246] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.127636] ACPI: AC Adapter [AC] (on-line)
[    3.127742] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    3.127747] ACPI: Power Button [PWRB]
[    3.127790] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    3.127830] ACPI: Lid Switch [LID0]
[    3.127866] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    3.127869] ACPI: Sleep Button [SLPB]
[    3.127918] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.127921] ACPI: Power Button [PWRF]
[    3.128182] ACPI: Fan [FAN0] (off)
[    3.128393] ACPI: Fan [FAN1] (off)
[    3.128470] ACPI: Requesting acpi_cpufreq
[    3.628010] thermal LNXTHERM:00: registered as thermal_zone0
[    3.628013] ACPI: Thermal Zone [THRM] (0 C)
[    3.628068] GHES: HEST is not enabled!
[    3.628137] isapnp: Scanning for PnP cards...
[    3.628147] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.629444] Linux agpgart interface v0.103
[    3.629525] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    3.629572] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.630014] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    3.630148] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    3.631471] brd: module loaded
[    3.632098] loop: module loaded
[    3.632476] libphy: Fixed MDIO Bus: probed
[    3.632569] tun: Universal TUN/TAP device driver, 1.6
[    3.632570] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.632604] PPP generic driver version 2.4.2
[    3.632644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.632646] ehci-pci: EHCI PCI platform driver
[    3.632816] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    3.632827] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    3.632833] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.632850] ehci-pci 0000:00:1a.0: debug port 2
[    3.636782] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    3.636803] ehci-pci 0000:00:1a.0: irq 16, io mem 0x96405c00
[    3.647404] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.647439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.647441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.647444] usb usb1: Product: EHCI Host Controller
[    3.647446] usb usb1: Manufacturer: Linux 3.11.0-17-generic ehci_hcd
[    3.647447] usb usb1: SerialNumber: 0000:00:1a.0
[    3.647556] hub 1-0:1.0: USB hub found
[    3.647562] hub 1-0:1.0: 3 ports detected
[    3.647781] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    3.647789] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.647794] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.647810] ehci-pci 0000:00:1d.0: debug port 2
[    3.651729] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    3.651748] ehci-pci 0000:00:1d.0: irq 20, io mem 0x96405800
[    3.663396] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.663409] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.663411] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.663413] usb usb2: Product: EHCI Host Controller
[    3.663415] usb usb2: Manufacturer: Linux 3.11.0-17-generic ehci_hcd
[    3.663417] usb usb2: SerialNumber: 0000:00:1d.0
[    3.663507] hub 2-0:1.0: USB hub found
[    3.663511] hub 2-0:1.0: 3 ports detected
[    3.663613] ehci-platform: EHCI generic platform driver
[    3.663620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.663622] ohci-pci: OHCI PCI platform driver
[    3.663631] ohci-platform: OHCI generic platform driver
[    3.663637] uhci_hcd: USB Universal Host Controller Interface driver
[    3.663709] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.679126] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.679131] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.679224] mousedev: PS/2 mouse device common for all mice
[    3.679643] rtc_cmos 00:06: RTC can wake from S4
[    3.679769] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    3.679802] rtc_cmos 00:06: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    3.679871] device-mapper: uevent: version 1.0.3
[    3.679929] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    3.679946] platform eisa.0: Probing EISA bus 0
[    3.680092] platform eisa.0: EISA: Detected 0 cards
[    3.680099] cpufreq-nforce2: No nForce2 chipset.
[    3.680137] cpuidle: using governor ladder
[    3.680185] cpuidle: using governor menu
[    3.680196] ledtrig-cpu: registered to indicate activity on CPUs
[    3.680289] TCP: cubic registered
[    3.680395] NET: Registered protocol family 10
[    3.680598] NET: Registered protocol family 17
[    3.680608] Key type dns_resolver registered
[    3.680777] Using IPI No-Shortcut mode
[    3.680840] PM: Hibernation image not present or could not be loaded.
[    3.680843] Loading module verification certificates
[    3.684674] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 10f9697de12db64f7394917788aed0b196be9396'
[    3.684686] registered taskstats version 1
[    3.696429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.729503] Key type trusted registered
[    3.736318] Key type encrypted registered
[    3.741184] AppArmor: AppArmor sha1 policy hashing enabled
[    3.742323]   Magic number: 14:335:520
[    3.742426] rtc_cmos 00:06: setting system clock to 2014-01-30 06:31:43 UTC (1391063503)
[    3.742884] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.742886] EDD information not available.
[    3.860333] tsc: Refined TSC clocksource calibration: 2127.999 MHz
[    3.959306] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.991002] isapnp: No Plug & Play device found
[    4.032463] ACPI: Battery Slot [BAT0] (battery present)
[    4.032779] Freeing unused kernel memory: 880K (c1973000 - c1a4f000)
[    4.032850] Write protecting the kernel text: 6364k
[    4.032940] Write protecting the kernel read-only data: 2696k
[    4.032941] NX-protecting the kernel data: 5924k
[    4.049308] systemd-udevd[97]: starting version 204
[    4.091712] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    4.091721] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.092243] hub 1-1:1.0: USB hub found
[    4.092286] hub 1-1:1.0: 6 ports detected
[    4.203219] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.337930] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    4.337935] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.338349] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.338360] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.338734] r8169 0000:03:00.0: irq 40 for MSI/MSI-X
[    4.338830] hub 2-1:1.0: USB hub found
[    4.338924] hub 2-1:1.0: 8 ports detected
[    4.339007] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8422000, dc:0e:a1:28:ea:75, XID 0c200000 IRQ 40
[    4.339009] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.342713] ahci 0000:00:1f.2: version 3.0
[    4.342879] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    4.342917] ahci: SSS flag set, parallel bus scan disabled
[    4.342967] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    4.342971] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    4.342977] ahci 0000:00:1f.2: setting latency timer to 64
[    4.355623] scsi0 : ahci
[    4.355739] scsi1 : ahci
[    4.355834] scsi2 : ahci
[    4.359133] scsi3 : ahci
[    4.360090] scsi4 : ahci
[    4.360204] ata1: SATA max UDMA/133 abar m2048@0x96405000 port 0x96405100 irq 41
[    4.360208] ata2: SATA max UDMA/133 abar m2048@0x96405000 port 0x96405180 irq 41
[    4.360210] ata3: DUMMY
[    4.360211] ata4: DUMMY
[    4.360214] ata5: SATA max UDMA/133 abar m2048@0x96405000 port 0x96405300 irq 41
[    4.611245] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    4.679047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.681338] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    4.681476] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[    4.681485] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    4.681721] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    4.681924] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    4.683965] ata1.00: ATA-8: WDC WD2500BEVT-00S2MT0, 01.01A01, max UDMA/133
[    4.683971] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    4.686336] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    4.686343] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    4.686552] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    4.686753] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    4.687106] ata1.00: configured for UDMA/133
[    4.687469] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-0 01.0 PQ: 0 ANSI: 5
[    4.687749] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    4.687787] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.687823] sd 0:0:0:0: [sda] Write Protect is off
[    4.687827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.687857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.753744]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    4.755205] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.765671] usb 2-1.3: New USB device found, idVendor=174f, idProduct=1442
[    4.765679] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.765684] usb 2-1.3: Product: USB Video Device
[    4.765689] usb 2-1.3: Manufacturer: Generic
[    4.765693] usb 2-1.3: SerialNumber: 200901010001
[    4.839146] usb 2-1.5: new low-speed USB device number 4 using ehci-pci
[    4.859091] Switched to clocksource tsc
[    4.934718] usb 2-1.5: New USB device found, idVendor=15d9, idProduct=0a4f
[    4.934725] usb 2-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.934730] usb 2-1.5: Product:  USB OPTICAL MOUSE
[    4.944027] hidraw: raw HID events driver (C) Jiri Kosina
[    4.952079] usbcore: registered new interface driver usbhid
[    4.952084] usbhid: USB HID core driver
[    4.956616] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5
[    4.956753] hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.5/input0
[    5.006892] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.016177] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    5.020043] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) succeeded
[    5.020052] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out
[    5.023952] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 (SET FEATURES) succeeded
[    5.027951] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) succeeded
[    5.033883] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SB01, max UDMA/100
[    5.040817] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    5.044717] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) succeeded
[    5.044725] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out
[    5.048633] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 (SET FEATURES) succeeded
[    5.054571] ata2.00: configured for UDMA/100
[    5.059600] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208BB  SB01 PQ: 0 ANSI: 5
[    5.074205] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.074211] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.074477] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.074557] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.390729] ata5: SATA link down (SStatus 0 SControl 300)
[    8.985851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.357386] Adding 1953788k swap on /dev/sda5.  Priority:-1 extents:1 across:1953788k FS
[   13.653065] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.775645] systemd-udevd[271]: starting version 204
[   14.487304] lp: driver loaded but no devices found
[   14.588649] cfg80211: Calling CRDA to update world regulatory domain
[   14.948185] rtl8192se: FW Power Save off (module option)
[   14.948226] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[   14.948226] Loading firmware rtlwifi/rtl8192sefw.bin
[   15.162135] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   17.000455] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[   17.000463] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \_SB_.PCI0.IEIT.SGPE 2 (20130517/utaddress-251)
[   17.000468] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.000472] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[   17.000476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.000477] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[   17.000481] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.GFX0.GPIO 2 (20130517/utaddress-251)
[   17.000484] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.000486] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[   17.000489] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.GFX0.GPIO 2 (20130517/utaddress-251)
[   17.000492] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.000494] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   17.028047] mei_me 0000:00:16.0: setting latency timer to 64
[   17.028097] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   17.113765] [drm] Initialized drm 1.1.0 20060810
[   17.303385] wmi: Mapper loaded
[   17.306025] [drm] Memory usable by graphics device = 2048M
[   17.306034] i915 0000:00:02.0: setting latency timer to 64
[   17.306238] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   17.306247] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   17.306249] [drm] Driver supports precise vblank timestamp query.
[   17.306269] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[   17.306316] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[   17.306408] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   17.376544] fbcon: inteldrmfb (fb0) is primary device
[   17.432779] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[   18.070149] Linux video capture interface: v2.00
[   18.097723] Console: switching to colour frame buffer device 170x48
[   18.103480] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   18.103481] i915 0000:00:02.0: registered panic notifier
[   18.110645] type=1400 audit(1391063517.869:2): apparmor="STATUS" operation="profile_load" parent=346 profile="unconfined" name="/sbin/dhclient" pid=350 comm="apparmor_parser"
[   18.110654] type=1400 audit(1391063517.869:3): apparmor="STATUS" operation="profile_load" parent=346 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=350 comm="apparmor_parser"
[   18.110659] type=1400 audit(1391063517.869:4): apparmor="STATUS" operation="profile_load" parent=346 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=350 comm="apparmor_parser"
[   18.111354] type=1400 audit(1391063517.869:5): apparmor="STATUS" operation="profile_replace" parent=346 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=350 comm="apparmor_parser"
[   18.111360] type=1400 audit(1391063517.869:6): apparmor="STATUS" operation="profile_replace" parent=346 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=350 comm="apparmor_parser"
[   18.111729] type=1400 audit(1391063517.869:7): apparmor="STATUS" operation="profile_replace" parent=346 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=350 comm="apparmor_parser"
[   18.142676] acpi device:02: registered as cooling_device4
[   18.144035] acpi device:03: registered as cooling_device5
[   18.144181] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   18.144230] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   18.144359] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   18.145560] intel ips 0000:00:1f.6: No CPUID match found.
[   18.145563] intel ips 0000:00:1f.6: IPS not supported on this CPU
[   18.145899] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   18.186283] SKU: Nid=0x1d sku_cfg=0x4016892d
[   18.186286] SKU: port_connectivity=0x1
[   18.186288] SKU: enable_pcbeep=0x1
[   18.186289] SKU: check_sum=0x00000006
[   18.186290] SKU: customization=0x00000089
[   18.186291] SKU: external_amp=0x5
[   18.186293] SKU: platform_type=0x1
[   18.186294] SKU: swap=0x0
[   18.186295] SKU: override=0x1
[   18.186487] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   18.186488]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.186490]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   18.186491]    mono: mono_out=0x0
[   18.186492]    inputs:
[   18.186494]      Internal Mic=0x19
[   18.186496]      Mic=0x18
[   18.186497] realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d
[   18.186499] realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272
[   18.222629] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   18.223642] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   18.224478] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   18.252594] uvcvideo: Found UVC 1.00 device USB Video Device (174f:1442)
[   18.272121] input: USB Video Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
[   18.272241] usbcore: registered new interface driver uvcvideo
[   18.272244] USB Video Class driver (1.1.1)
[   18.285335] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   18.362614] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   18.366562] input: HP WMI hotkeys as /devices/virtual/input/input11
[   18.651379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04773/0xa40000/0xa0000, board id: 3655, fw id: 515972
[   18.725429] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[   19.290885] cfg80211: World regulatory domain updated:
[   19.290890] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.290892] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.290894] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.290896] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.290898] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.290899] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.189637] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   24.318950] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   25.094618] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   27.979328] init: failsafe main process (579) killed by TERM signal
[   28.774100] type=1400 audit(1391063528.537:8): apparmor="STATUS" operation="profile_replace" parent=701 profile="unconfined" name="/sbin/dhclient" pid=706 comm="apparmor_parser"
[   28.774111] type=1400 audit(1391063528.537:9): apparmor="STATUS" operation="profile_replace" parent=701 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=706 comm="apparmor_parser"
[   28.774117] type=1400 audit(1391063528.537:10): apparmor="STATUS" operation="profile_replace" parent=701 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser"
[   28.774815] type=1400 audit(1391063528.537:11): apparmor="STATUS" operation="profile_replace" parent=701 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=706 comm="apparmor_parser"
[   28.774820] type=1400 audit(1391063528.537:12): apparmor="STATUS" operation="profile_replace" parent=701 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser"
[   28.775189] type=1400 audit(1391063528.537:13): apparmor="STATUS" operation="profile_replace" parent=701 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser"
[   28.945096] type=1400 audit(1391063528.709:14): apparmor="STATUS" operation="profile_load" parent=701 profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=709 comm="apparmor_parser"
[   28.945105] type=1400 audit(1391063528.709:15): apparmor="STATUS" operation="profile_load" parent=701 profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=709 comm="apparmor_parser"
[   28.945110] type=1400 audit(1391063528.709:16): apparmor="STATUS" operation="profile_load" parent=701 profile="unconfined" name="pxgsettings" pid=709 comm="apparmor_parser"
[   28.945115] type=1400 audit(1391063528.709:17): apparmor="STATUS" operation="profile_load" parent=701 profile="unconfined" name="sanitized_helper" pid=709 comm="apparmor_parser"
[   29.757808] Bluetooth: Core ver 2.16
[   29.757829] NET: Registered protocol family 31
[   29.757831] Bluetooth: HCI device and connection manager initialized
[   29.757840] Bluetooth: HCI socket layer initialized
[   29.757842] Bluetooth: L2CAP socket layer initialized
[   29.757847] Bluetooth: SCO socket layer initialized
[   29.840373] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.840377] Bluetooth: BNEP filters: protocol multicast
[   29.840388] Bluetooth: BNEP socket layer initialized
[   29.898321] init: avahi-cups-reload main process (796) terminated with status 1
[   29.974909] Bluetooth: RFCOMM TTY layer initialized
[   29.974923] Bluetooth: RFCOMM socket layer initialized
[   29.974925] Bluetooth: RFCOMM ver 1.11
[   30.142113] ppdev: user-space parallel port driver
[   32.053095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.053473] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.335482] r8169 0000:03:00.0 eth0: link down
[   32.335518] r8169 0000:03:00.0 eth0: link down
[   32.335578] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.336063] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.843736] r8169 0000:03:00.0 eth0: link up
[   33.843754] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


Kod Seç Genişlet

ertugrul@ertsx:~$ dmesg | tail
[   29.974925] Bluetooth: RFCOMM ver 1.11
[   30.142113] ppdev: user-space parallel port driver
[   32.053095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.053473] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.335482] r8169 0000:03:00.0 eth0: link down
[   32.335518] r8169 0000:03:00.0 eth0: link down
[   32.335578] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.336063] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.843736] r8169 0000:03:00.0 eth0: link up
[   33.843754] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


[speakerXXL]

Aygıt donanımsal olarak kilitli görünüyor. Başka çözümler denemeden önce BIOS'u sıfırlamayı deneyebilirsiniz.

[yakusha]

Bios'u sıfırladım, Bios'ta bununla ilgili bir ayar görünmüyor...

fn + f2 tuşuyla aktif edilemiyor. Tuşun bozuk veya Driver'ın sıkıntılı olduğunu düşünüyorum...


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Ocak 2014 - 16:03:55
Debian 7.x için bir paket sunulmuş, lakin bunu ubuntu gnome 13.10 üstüne kurmam mümkün olabilir mi, veya olursa da ne kadar sağlıklı olur.

https://wiki.debian.org/rtl819x

[heartsmagic]

Mesele sürücü değil burada, donanımsal olarak kapalı aygıt. Sağda solda anahtar yoksa nasıl açılır bilemiyorum.

Kod Seç Genişlet

sudo rfkill unblock all

ile şansını deneyebilirsin.

[yakusha]

uf uf; sonunda sorunu çözdük... Yeğenim laptopu kurcalarken tam önde benim fark edemediğim bir düğme varmış, vireless aç kapa düğmesi, onu kapatmış

biz de 3 defa kurulum yaptık, bilmem kaç makale okuduk ve şimdi çözdük

[heartsmagic]

Etiket için teşekkürler. Donanımsal olarak kapalıysa öncelikle akla bu geliyor. Gerçi anahtarı olmayıp donanımsal olarak kapalı olan sistemleri de gördük, senin sorunun kolay yoldan çözülmüş.