[Çözüldü] İnternete Baglanmıyor

[Lazkopat]

Merhabalar bugun ilk kez ubuntu kurdum bilgisayarıma ancak bir problemle karsılastım herhangibir aga baglanamıyorum.Hatta agları bulamıyor bile pc.Linux hakkındada hiç bilgim yok biraz arastırdım ancak çözum bulamadım.Benzer konulara baktıgımda lspci komutu ve ifconfig komutunun cıktısını istemıs cıktılar altta mevcut.Yardım edersenız sevınırım

Kod Seç Genişlet

ubuntu@M-UBUNTU:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)



Kod Seç Genişlet

ubuntu@M-UBUNTU:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:54:ff:66:1c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:19

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:528 errors:0 dropped:0 overruns:0 frame:0
          TX packets:528 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:42272 (42.2 KB)  TX bytes:42272 (42.2 KB)




[if]

@Lazkopat,

Kod Seç Genişlet

sudo rfkill list çıktısını da alayım.

[Lazkopat]

Kod Seç Genişlet

[sudo] password for ubuntu:
0: samsung-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no


[if]

Kod Seç Genişlet

sudo rfkill unblock all komutundan sonra bağlanabiliyor musunuz?

[Lazkopat]

değişiklik yok hocam baglanamadım

[if]

http://forum.ubuntu-tr.net/index.php?topic=28764.0

Çıktıların hepsini görebilir miyim?

[Lazkopat]

Kod Seç Genişlet

ubuntu@M-UBUNTU:~$ cat/etc/lsb-release
bash: cat/etc/lsb-release: No such file or directory
ubuntu@M-UBUNTU:~$ uname -a
Linux M-UBUNTU 3.8.0-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 16:19:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
ubuntu@M-UBUNTU:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ubuntu@M-UBUNTU:~$ lsusb
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1210:25f4 DigiTech
Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 004: ID 0a5c:219c Broadcom Corp.
ubuntu@M-UBUNTU:~$ rfkill list
0: samsung-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no

ubuntu@M-UBUNTU:~$ sudo lshw -C network
[sudo] password for ubuntu:
  *-network UNCLAIMED     
       description: Network controller
       product: BCM4313 802.11b/g/n Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: latency=0
       resources: memory:f3800000-f3803fff
  *-network
       description: Ethernet interface
       product: 88E8040 PCI-E Fast Ethernet Controller
       vendor: Marvell Technology Group Ltd.
       physical id: 0
       bus info: pci@0000:06:00.0
       logical name: eth0
       version: 00
       serial: 00:24:54:ff:66:1c
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 latency=0 link=no multicast=yes port=twisted pair
       resources: irq:41 memory:f2400000-f2403fff ioport:b000(size=256)
ubuntu@M-UBUNTU:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:54:ff:66:1c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:19

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:240 errors:0 dropped:0 overruns:0 frame:0
          TX packets:240 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:19392 (19.3 KB)  TX bytes:19392 (19.3 KB)

ubuntu@M-UBUNTU:~$ iwconfig
eth0      no wireless extensions.

lo        no wireless extensions.

ubuntu@M-UBUNTU:~$
ubuntu@M-UBUNTU:~$ iwlist scanning
eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

ubuntu@M-UBUNTU:~$ lsmod
Module                  Size  Used by
rfcomm                 47864  12
bnep                   18258  2
parport_pc             28284  0
ppdev                  17113  0
snd_hda_codec_hdmi     37434  1
uvcvideo               82214  0
videobuf2_core         40785  1 uvcvideo
videodev              130053  2 uvcvideo,videobuf2_core
videobuf2_vmalloc      13056  1 uvcvideo
videobuf2_memops       13202  1 videobuf2_vmalloc
joydev                 17613  0
snd_hda_codec_realtek    79916  1
snd_hda_intel          44339  5
snd_hda_codec         141716  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
radeon                960918  3
snd_hwdep              13668  1 snd_hda_codec
snd_pcm               102477  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
coretemp               13596  0
kvm_intel             137899  0
snd_seq_midi           13324  0
snd_rawmidi            30417  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
ttm                    84051  1 radeon
snd_seq                61930  2 snd_seq_midi,snd_seq_midi_event
drm_kms_helper         49597  1 radeon
snd_timer              29989  2 snd_pcm,snd_seq
snd_seq_device         14497  3 snd_seq_midi,snd_rawmidi,snd_seq
drm                   287564  5 radeon,ttm,drm_kms_helper
kvm                   455932  1 kvm_intel
btusb                  22431  0
bluetooth             247024  24 rfcomm,bnep,btusb
snd                    69533  20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              12680  1 snd
samsung_laptop         18627  0
intel_ips              18066  0
i2c_algo_bit           13564  1 radeon
mac_hid                13253  0
psmouse                97873  0
snd_page_alloc         18798  2 snd_hda_intel,snd_pcm
video                  19652  1 samsung_laptop
serio_raw              13215  0
microcode              23017  0
lpc_ich                17144  0
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
hid_generic            12540  0
usbhid                 47346  0
hid                   105549  2 hid_generic,usbhid
ahci                   25879  4
libahci                31606  1 ahci
sky2                   62824  0


[    0.267299] pci 0000:00:1c.2: PCI bridge to [bus 03-05]
[    0.267303] pci 0000:00:1c.2:   bridge window [io  0x7000-0xafff]
[    0.267308] pci 0000:00:1c.2:   bridge window [mem 0xf0200000-0xf23fffff]
[    0.267557] pci 0000:06:00.0: [11ab:4354] type 00 class 0x020000
[    0.267704] pci 0000:06:00.0: reg 10: [mem 0xf2400000-0xf2403fff 64bit]
[    0.267779] pci 0000:06:00.0: reg 18: [io  0xb000-0xb0ff]
[    0.268513] pci 0000:06:00.0: supports D1 D2
[    0.268514] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.279245] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.279253] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    0.279260] pci 0000:00:1c.3:   bridge window [mem 0xf2400000-0xf37fffff]
[    0.279343] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.279355] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.279357] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.279358] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.279360] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.279361] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.279363] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.279364] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.279366] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.279367] pci 0000:00:1e.0:   bridge window [mem 0xbc000000-0xfeafffff] (subtractive decode)
[    0.279409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.279460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.279506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.279547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.279612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.279680] \_SB_.PCI0:_OSC invalid UUID
[    0.279681] _OSC request data:1 1f 0
[    0.279684]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.279686]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.280301] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[    0.280346] PCI host bridge to bus 0000:3f
[    0.280349] pci_bus 0000:3f: root bus resource [bus 3f]
[    0.280354] pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
[    0.280371] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[    0.280389] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[    0.280405] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[    0.280420] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[    0.280436] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[    0.280463]  pci0000:3f: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.280465]  pci0000:3f: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.280593] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.280631] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.280667] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[    0.280703] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.280738] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.280777] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.280815] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.280851] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.280953] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.280955] vgaarb: loaded
[    0.280956] vgaarb: bridge control possible 0000:01:00.0
[    0.281103] SCSI subsystem initialized
[    0.281105] ACPI: bus type scsi registered
[    0.281159] libata version 3.00 loaded.
[    0.281181] ACPI: bus type usb registered
[    0.281197] usbcore: registered new interface driver usbfs
[    0.281203] usbcore: registered new interface driver hub
[    0.281229] usbcore: registered new device driver usb
[    0.281309] PCI: Using ACPI for IRQ routing
[    0.283543] PCI: pci_cache_line_size set to 64 bytes
[    0.283700] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.283701] e820: reserve RAM buffer [mem 0xbaa8d000-0xbbffffff]
[    0.283790] NetLabel: Initializing
[    0.283792] NetLabel:  domain hash size = 128
[    0.283793] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.283802] NetLabel:  unlabeled traffic allowed by default
[    0.283865] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.283870] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.285883] Switching to clocksource hpet
[    0.290893] AppArmor: AppArmor Filesystem Enabled
[    0.290924] pnp: PnP ACPI init
[    0.290939] ACPI: bus type pnp registered
[    0.290985] pnp 00:00: [dma 4]
[    0.291006] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.291023] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.291134] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.291158] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.291208] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.291210] system 00:04: [io  0xff00-0xff0f] has been reserved
[    0.291212] system 00:04: [io  0xffff] has been reserved
[    0.291214] system 00:04: [io  0xffff] has been reserved
[    0.291216] system 00:04: [io  0x0400-0x047f] has been reserved
[    0.291217] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.291219] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.291222] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291261] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.291284] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.291305] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.291639] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.291641] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.291643] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.291645] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.291647] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.291648] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.291650] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.291652] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.291654] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.291656] system 00:08: [mem 0xf7fff000-0xf7ffffff] has been reserved
[    0.291659] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.292083] pnp: PnP ACPI: found 9 devices
[    0.292085] ACPI: ACPI bus type pnp unregistered
[    0.298321] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.298333] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-05] add_size 200000
[    0.298345] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[    0.298359] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.298361] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.298363] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.298368] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc000000-0xbc1fffff 64bit pref]
[    0.298371] pci 0000:00:1c.2: BAR 15: assigned [mem 0xbc200000-0xbc3fffff 64bit pref]
[    0.298373] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref]
[    0.298377] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.298379] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.298382] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf00fffff]
[    0.298386] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.298390] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.298396] pci 0000:00:1c.0:   bridge window [mem 0xf3800000-0xf4bfffff]
[    0.298400] pci 0000:00:1c.0:   bridge window [mem 0xbc000000-0xbc1fffff 64bit pref]
[    0.298407] pci 0000:00:1c.2: PCI bridge to [bus 03-05]
[    0.298410] pci 0000:00:1c.2:   bridge window [io  0x7000-0xafff]
[    0.298416] pci 0000:00:1c.2:   bridge window [mem 0xf0200000-0xf23fffff]
[    0.298421] pci 0000:00:1c.2:   bridge window [mem 0xbc200000-0xbc3fffff 64bit pref]
[    0.298428] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.298431] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    0.298437] pci 0000:00:1c.3:   bridge window [mem 0xf2400000-0xf37fffff]
[    0.298441] pci 0000:00:1c.3:   bridge window [mem 0xbc400000-0xbc5fffff 64bit pref]
[    0.298448] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.298499] pci 0000:00:1e.0: setting latency timer to 64
[    0.298503] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.298505] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.298506] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.298508] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.298509] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.298511] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.298512] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.298514] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
[    0.298515] pci_bus 0000:00: resource 12 [mem 0xbc000000-0xfeafffff]
[    0.298517] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.298519] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
[    0.298520] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.298522] pci_bus 0000:02: resource 1 [mem 0xf3800000-0xf4bfffff]
[    0.298524] pci_bus 0000:02: resource 2 [mem 0xbc000000-0xbc1fffff 64bit pref]
[    0.298525] pci_bus 0000:03: resource 0 [io  0x7000-0xafff]
[    0.298527] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf23fffff]
[    0.298528] pci_bus 0000:03: resource 2 [mem 0xbc200000-0xbc3fffff 64bit pref]
[    0.298530] pci_bus 0000:06: resource 0 [io  0xb000-0xbfff]
[    0.298531] pci_bus 0000:06: resource 1 [mem 0xf2400000-0xf37fffff]
[    0.298533] pci_bus 0000:06: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref]
[    0.298535] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]
[    0.298536] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]
[    0.298538] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[    0.298540] pci_bus 0000:07: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.298541] pci_bus 0000:07: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.298543] pci_bus 0000:07: resource 9 [mem 0x000dc000-0x000dffff]
[    0.298544] pci_bus 0000:07: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.298546] pci_bus 0000:07: resource 11 [mem 0x000e4000-0x000e7fff]
[    0.298547] pci_bus 0000:07: resource 12 [mem 0xbc000000-0xfeafffff]
[    0.298584] NET: Registered protocol family 2
[    0.298728] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.298956] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.299146] TCP: Hash tables configured (established 32768 bind 32768)
[    0.299179] TCP: reno registered
[    0.299188] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.299215] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.299288] NET: Registered protocol family 1
[    0.553795] pci 0000:01:00.0: Boot video device
[    0.553897] PCI: CLS 64 bytes, default 64
[    0.553939] Trying to unpack rootfs image as initramfs...
[    0.790787] Freeing initrd memory: 15644k freed
[    0.794690] Initialise module verification
[    0.794735] audit: initializing netlink socket (disabled)
[    0.794748] type=2000 audit(1391042005.684:1): initialized
[    0.819582] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.820723] VFS: Disk quotas dquot_6.5.2
[    0.820763] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.821150] fuse init (API version 7.20)
[    0.821213] msgmni has been set to 5843
[    0.821557] Key type asymmetric registered
[    0.821560] Asymmetric key parser 'x509' registered
[    0.821618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.821660] io scheduler noop registered
[    0.821662] io scheduler deadline registered (default)
[    0.821666] io scheduler cfq registered
[    0.821774] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.821957] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.821968] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.822003] intel_idle: MWAIT substates: 0x1120
[    0.822005] intel_idle: v0.4 model 0x25
[    0.822006] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.822136] ACPI: AC Adapter [ADP1] (on-line)
[    0.822227] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.822243] ACPI: Lid Switch [LID0]
[    0.822271] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.822275] ACPI: Power Button [PWRB]
[    0.822299] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.822301] ACPI: Sleep Button [SLPB]
[    0.822325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.822327] ACPI: Power Button [PWRF]
[    0.822376] ACPI: Fan [FAN0] (off)
[    0.822399] ACPI: Fan [FAN1] (off)
[    0.822440] ACPI: Requesting acpi_cpufreq
[    0.846322] thermal LNXTHERM:00: registered as thermal_zone0
[    0.846325] ACPI: Thermal Zone [TZ00] (79 C)
[    0.861295] thermal LNXTHERM:01: registered as thermal_zone1
[    0.861297] ACPI: Thermal Zone [TZ01] (79 C)
[    0.861325] GHES: HEST is not enabled!
[    0.861393] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.866364] Linux agpgart interface v0.103
[    0.867433] brd: module loaded
[    0.867971] loop: module loaded
[    0.868222] libphy: Fixed MDIO Bus: probed
[    0.868265] tun: Universal TUN/TAP device driver, 1.6
[    0.868266] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.868300] PPP generic driver version 2.4.2
[    0.868346] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.868348] ehci-pci: EHCI PCI platform driver
[    0.868375] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.868379] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.868384] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.868400] ehci-pci 0000:00:1a.0: debug port 2
[    0.872385] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.872403] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf4c08000
[    0.881574] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.881615] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.881619] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.881623] usb usb1: Product: EHCI Host Controller
[    0.881626] usb usb1: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
[    0.881630] usb usb1: SerialNumber: 0000:00:1a.0
[    0.881731] hub 1-0:1.0: USB hub found
[    0.881735] hub 1-0:1.0: 2 ports detected
[    0.881821] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.881824] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.881828] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.881842] ehci-pci 0000:00:1d.0: debug port 2
[    0.885814] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.885830] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf4c07000
[    0.897562] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.897600] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.897604] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.897608] usb usb2: Product: EHCI Host Controller
[    0.897611] usb usb2: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
[    0.897615] usb usb2: SerialNumber: 0000:00:1d.0
[    0.897703] hub 2-0:1.0: USB hub found
[    0.897706] hub 2-0:1.0: 2 ports detected
[    0.897771] ehci-platform: EHCI generic platform driver
[    0.897777] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.897787] uhci_hcd: USB Universal Host Controller Interface driver
[    0.897831] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.903553] ACPI: Battery Slot [BAT1] (battery present)
[    0.904395] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.904400] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.904490] mousedev: PS/2 mouse device common for all mice
[    0.904763] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.904794] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.904866] device-mapper: uevent: version 1.0.3
[    0.904913] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    0.904966] cpuidle: using governor ladder
[    0.905030] cpuidle: using governor menu
[    0.905034] ledtrig-cpu: registered to indicate activity on CPUs
[    0.905036] EFI Variables Facility v0.08 2004-May-17
[    0.905205] ashmem: initialized
[    0.905320] TCP: cubic registered
[    0.905395] NET: Registered protocol family 10
[    0.905574] NET: Registered protocol family 17
[    0.905584] Key type dns_resolver registered
[    0.905929] Loading module verification certificates
[    0.906616] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.907669] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 38550890b1fce75cc801d8fb942703db919b9386'
[    0.907691] registered taskstats version 1
[    0.910802] Key type trusted registered
[    0.912942] Key type encrypted registered
[    0.916642] rtc_cmos 00:05: setting system clock to 2014-01-30 00:33:26 UTC (1391042006)
[    0.918298] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.918302] EDD information not available.
[    0.919777] Freeing unused kernel memory: 1012k freed
[    0.919955] Write protecting the kernel read-only data: 12288k
[    0.922602] Freeing unused kernel memory: 1012k freed
[    0.925232] Freeing unused kernel memory: 1008k freed
[    0.939934] udevd[107]: starting version 175
[    0.970307] Disabling lock debugging due to kernel taint
[    0.970736] sky2: driver version 1.30
[    0.970925] sky2 0000:06:00.0: Yukon-2 FE+ chip revision 0
[    0.971442] sky2 0000:06:00.0: irq 41 for MSI/MSI-X
[    0.972198] sky2 0000:06:00.0 eth0: addr 00:24:54:ff:66:1c
[    0.975629] ahci 0000:00:1f.2: version 3.0
[    0.975700] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.975784] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    0.975786] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems sxs apst
[    0.975791] ahci 0000:00:1f.2: setting latency timer to 64
[    0.989958] scsi0 : ahci
[    0.990065] scsi1 : ahci
[    0.990153] scsi2 : ahci
[    0.990235] scsi3 : ahci
[    0.990376] scsi4 : ahci
[    0.990430] ata1: SATA max UDMA/133 abar m2048@0xf4c06000 port 0xf4c06100 irq 42
[    0.990434] ata2: SATA max UDMA/133 abar m2048@0xf4c06000 port 0xf4c06180 irq 42
[    0.990435] ata3: DUMMY
[    0.990437] ata4: DUMMY
[    0.990440] ata5: SATA max UDMA/133 abar m2048@0xf4c06000 port 0xf4c06300 irq 42
[    1.193470] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.309430] ata5: SATA link down (SStatus 0 SControl 300)
[    1.325756] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.325761] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.326174] hub 1-1:1.0: USB hub found
[    1.326350] hub 1-1:1.0: 6 ports detected
[    1.437348] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.481300] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.481330] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.483269] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633J, SC01, max UDMA/100
[    1.486064] ata1.00: ATA-8: WDC WD7500BPKX-22HPJT0, 01.01A01, max UDMA/133
[    1.486070] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.486237] ata2.00: configured for UDMA/100
[    1.491039] ata1.00: configured for UDMA/133
[    1.491357] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPKX-2 01.0 PQ: 0 ANSI: 5
[    1.491565] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.491569] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.491575] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.491638] sd 0:0:0:0: [sda] Write Protect is off
[    1.491642] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.491669] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.496265] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633J  SC01 PQ: 0 ANSI: 5
[    1.506061] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.506065] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.506216] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.506295] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.552004]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.553235] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.569739] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.569747] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.570265] hub 2-1:1.0: USB hub found
[    1.570450] hub 2-1:1.0: 8 ports detected
[    1.641339] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.754638] usb 1-1.1: New USB device found, idVendor=1210, idProduct=25f4
[    1.754646] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.754650] usb 1-1.1: Product: USB 2.0 PC Camera
[    1.754654] usb 1-1.1: Manufacturer: Alcor Micro, Corp.
[    1.793071] tsc: Refined TSC clocksource calibration: 2526.884 MHz
[    1.793080] Switching to clocksource tsc
[    1.841201] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[    1.939356] usb 2-1.2: New USB device found, idVendor=045e, idProduct=0745
[    1.939363] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.939367] usb 2-1.2: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[    1.939371] usb 2-1.2: Manufacturer: Microsoft
[    1.954479] usbcore: registered new interface driver usbhid
[    1.954483] usbhid: USB HID core driver
[    1.956456] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5
[    1.956578] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input0
[    1.956877] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input6
[    1.957138] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input1
[    1.967538] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input7
[    1.967938] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input2
[    2.009125] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[    2.106052] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=219c
[    2.106059] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.106063] usb 2-1.3: Product: Broadcom BCM2070 Bluetooth Device
[    2.106067] usb 2-1.3: Manufacturer: Broadcom Corp
[    2.106071] usb 2-1.3: SerialNumber: 001BB1D37C9E
[    3.263572] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.997723] init: ureadahead main process (316) terminated with status 5
[    4.538300] Adding 3998716k swap on /dev/sda5.  Priority:-1 extents:1 across:3998716k
[    5.010864] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.211472] udevd[394]: starting version 175
[    5.730505] lp: driver loaded but no devices found
[    5.763055] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[    5.763064] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.763069] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    5.763072] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.763074] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    5.763077] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.763078] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    5.763081] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.763082] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.780051] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    5.799762] acpi device:08: registered as cooling_device6
[    5.799795] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    5.799841] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:00/input/input8
[    5.845606] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    5.845654] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[    5.845769] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    5.848880] samsung_laptop: detected SABI interface: SwSmi@
[    5.848883] samsung_laptop: Backlight controlled by ACPI video driver
[    5.856423] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[    5.857668] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[    5.858894] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[    5.860259] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.970571] Bluetooth: Core ver 2.16
[    5.970592] NET: Registered protocol family 31
[    5.970594] Bluetooth: HCI device and connection manager initialized
[    5.970605] Bluetooth: HCI socket layer initialized
[    5.970608] Bluetooth: L2CAP socket layer initialized
[    5.970623] Bluetooth: SCO socket layer initialized
[    5.986063] usbcore: registered new interface driver btusb
[    6.024924] [drm] Initialized drm 1.1.0 20060810
[    6.142751] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    6.302429] [drm] radeon defaulting to kernel modesetting.
[    6.302433] [drm] radeon kernel modesetting enabled.
[    6.302663] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x144D:0xC07F).
[    6.302688] [drm] register mmio base: 0xF0020000
[    6.302689] [drm] register mmio size: 65536
[    6.302754] ATOM BIOS: BR036795
[    6.302773] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    6.302775] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    6.304152] [drm] Detected VRAM RAM=1024M, BAR=256M
[    6.304157] [drm] RAM width 64bits DDR
[    6.304231] [TTM] Zone  kernel: Available graphics memory: 1497466 kiB
[    6.304233] [TTM] Initializing pool allocator
[    6.304237] [TTM] Initializing DMA pool allocator
[    6.304268] [drm] radeon: 1024M of VRAM memory ready
[    6.304269] [drm] radeon: 512M of GTT memory ready.
[    6.304293] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    6.304849] [drm] probing gen 2 caps for device 8086:45 = 1/0
[    6.304912] [drm] Loading RV710 Microcode
[    6.372356] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    6.372437] radeon 0000:01:00.0: WB enabled
[    6.372440] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800b3083c00
[    6.372442] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800b3083c0c
[    6.372444] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.372445] [drm] Driver supports precise vblank timestamp query.
[    6.372483] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[    6.372497] radeon 0000:01:00.0: radeon: using MSI.
[    6.372527] [drm] radeon: irq initialized.
[    6.418771] [drm] ring test on 0 succeeded in 1 usecs
[    6.418832] [drm] ring test on 3 succeeded in 1 usecs
[    6.418965] [drm] ib test on ring 0 succeeded in 0 usecs
[    6.418982] [drm] ib test on ring 3 succeeded in 0 usecs
[    6.440874] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    6.471663] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.471735] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.474230] [drm] radeon atom DIG backlight initialized
[    6.474238] [drm] Radeon Display Connectors
[    6.474240] [drm] Connector 0:
[    6.474244] [drm]   LVDS-1
[    6.474247] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    6.474249] [drm]   Encoders:
[    6.474252] [drm]     LCD1: INTERNAL_UNIPHY2
[    6.474254] [drm] Connector 1:
[    6.474256] [drm]   VGA-1
[    6.474259] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    6.474261] [drm]   Encoders:
[    6.474263] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.474265] [drm] Connector 2:
[    6.474267] [drm]   HDMI-A-1
[    6.474269] [drm]   HPD1
[    6.474273] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[    6.474274] [drm]   Encoders:
[    6.474276] [drm]     DFP1: INTERNAL_UNIPHY
[    6.474333] [drm] radeon: power management initialized
[    6.613877] Linux video capture interface: v2.00
[    6.626599] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040215)
[    6.632551] type=1400 audit(1391034812.215:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=632 comm="apparmor_parser"
[    6.632560] type=1400 audit(1391034812.215:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=681 comm="apparmor_parser"
[    6.632878] type=1400 audit(1391034812.215:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=632 comm="apparmor_parser"
[    6.632885] type=1400 audit(1391034812.215:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
[    6.633061] type=1400 audit(1391034812.215:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=632 comm="apparmor_parser"
[    6.633070] type=1400 audit(1391034812.215:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
[    6.660243] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x14, 0x0c.
[    6.697000] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (1210:25f4)
[    6.700136] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input11
[    6.700243] usbcore: registered new interface driver uvcvideo
[    6.700245] USB Video Class driver (1.1.1)
[    6.787859] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input12
[    6.905147] [drm] fb mappable at 0xE0142000
[    6.905151] [drm] vram apper at 0xE0000000
[    6.905152] [drm] size 4325376
[    6.905153] [drm] fb depth is 24
[    6.905153] [drm]    pitch is 5632
[    6.905241] fbcon: radeondrmfb (fb0) is primary device
[    7.065356] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    7.173925] Console: switching to colour frame buffer device 170x48
[    7.176720] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    7.176722] radeon 0000:01:00.0: registered panic notifier
[    7.176741] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[    7.176871] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    7.176961] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[    7.229228] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    7.796669] init: failsafe main process (788) killed by TERM signal
[    8.747627] ppdev: user-space parallel port driver
[    8.817602] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.817607] Bluetooth: BNEP filters: protocol multicast
[    8.817619] Bluetooth: BNEP socket layer initialized
[    8.820258] Bluetooth: RFCOMM TTY layer initialized
[    8.820268] Bluetooth: RFCOMM socket layer initialized
[    8.820270] Bluetooth: RFCOMM ver 1.11
[    9.262442] type=1400 audit(1391034814.847:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=865 comm="apparmor_parser"
[    9.262864] type=1400 audit(1391034814.847:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=865 comm="apparmor_parser"
[   10.711308] type=1400 audit(1391034816.295:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=901 comm="apparmor_parser"
[   10.711646] type=1400 audit(1391034816.295:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=901 comm="apparmor_parser"
[   11.071347] sky2 0000:06:00.0 eth0: enabling interface
[   11.071810] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.073830] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.485124] audit_printk_skb: 48 callbacks suppressed
[   35.485128] type=1400 audit(1391034841.087:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1783 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  148.204998] Program lshw tried to access /dev/mem between ff000->101000.
[  539.876737] Program lshw tried to access /dev/mem between ff000->101000

ubuntu@M-UBUNTU:~$ dmesg | tail
[    9.262864] type=1400 audit(1391034814.847:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=865 comm="apparmor_parser"
[   10.711308] type=1400 audit(1391034816.295:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=901 comm="apparmor_parser"
[   10.711646] type=1400 audit(1391034816.295:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=901 comm="apparmor_parser"
[   11.071347] sky2 0000:06:00.0 eth0: enabling interface
[   11.071810] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.073830] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.485124] audit_printk_skb: 48 callbacks suppressed
[   35.485128] type=1400 audit(1391034841.087:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1783 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  148.204998] Program lshw tried to access /dev/mem between ff000->101000.
[  539.876737] Program lshw tried to access /dev/mem between ff000->101000.



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 29 Ocak 2014 - 12:35:17
wireless driveri olmayabilir mi acaba?

[Lazkopat]

Merhaba dün Ubuntu kurdum bilgisayarıma.Suan wireless aglarını görmuyor pc.Sanırım wireless driveri yuklemem gerek.Neyse broadcom n sitesinden bir dosya indirdim. tar.gz uzantılı.Dosyanın yanında gelen kurulum dosyasında bazı komutlar var ama calıstıramadım komutu.

Kod Seç Genişlet

BUILD INSTRUCTIONS
------------------
1. Setup the directory by untarring the proper tarball:

For 32 bit: hybrid-v35-nodebug-pcoem-portsrc.tar.gz
For 64 bit: hybrid-v35_64-nodebug-pcoem-portsrc.tar.gz

Example:
# mkdir hybrid_wl
# cd hybrid_wl
# tar xzf <path>/hybrid-v35-nodebug-pcoem-portsrc.tar.gz or
<path>/hybrid-v35_64-nodebug-pcoem-portsrc.tar.gz

2. Build the driver as a Linux loadable kernel module (LKM):

# make clean   (optional)
# make

When the build completes, it will produce a wl.ko file in the top level
directory.

If your driver does not build, check to make sure you have installed the
kernel package described in the requirements above.

This driver uses cfg80211 API. Code for Wext API is present and can be built
but we have dropped support for it.
As before, the Makefile will still build the matching version for your system.



böyle bir komut var.Ubuntuda yenıyım hiçbir bilgim yok ancak sanırım yenı bir klasor acıp bu tar.gz uzantılı dosyayı bunun içine cıkartmam gerek.Klasoru olusturdum ancak cıkarma komutunu yazdıgımda no such a file or directory yazdı.Bulamadı yazdıgım klasoru.Tam olarak nasıl yapmam gerek.

Kod Seç Genişlet

# tar xzf <path>/hybrid-v35-nodebug-pcoem-portsrc.tar.gz or
<path>/hybrid-v35_64-nodebug-pcoem-portsrc.tar.gz

Su ksımda <path > den sonrakı kısma dosya masaustunde oldugu için direk sürükledim dosyayı otomatık dizin adresi geldi ancak olmadı yinede tam olarak napmam gereklı baska önerisi olan varmıdır?

[alorak]

Dosya masüstünde olduğu için o kısmı yaparken konsolda aşağıdaki komutu yazmanız gerekir. / arasındaki her kelimede ilk 2 veya 3 harf yazdıktan sonra  klavyeden TAB tuşuna basarak otomatik tamamlanmasını sağlayabilirsiniz. Eğer TAB ile tamamlanmıyorsa iki kere TAB'a peş peşe tıklarsanız aynı isimliler ekrana gösterilir ve yazmaya devam ederseniz harf çakışması olmayınca tamamlar. Eğer hala çıkmıyorsa öyle bir klasör bulunmamaktadır anlamı çıkar.

Kod Seç Genişlet

tar xzf ~/home/kullanıcıadın/Destop(veya türkçe kullanıyorsanız Masaüstü)/hybrid-v35_64-nodebug-pcoem-portsrc.tar.gz


[TheGodEmperor]

Ben şu şekilde yapmıştım. Eski msdosdan kalma yöntem işe yarıyor. Genel klasörüne atmıştım böyle bir dosyayı. cd genel yazıp içine girmiştim. sonra kodu çalıştırmıştım.
Ya da en kısa yolu çift tklayıp açmak ve sürükleyerek dışarı bırakmak. O da oluyor.

[heartsmagic]

İnternet sorunu diğer başlıkta konuşuluyor zaten, yeni bir başlık açmayalım bunun için. Konuları birleştiriyorum.

[heartsmagic]

@Lazkopat, komutlardan birini yanlış uygulamışsın Ubuntu sürümünü göremiyoruz. Çekirdekten anladığım kadarıyla 13.10 değil ama. Hangi Ubuntu sürümünü kullanıyorsun ve kablo ile geçici olarak internete bağlanma şansın var mı?

[Lazkopat]

iso dosyasında 12.04.3.Suan kablo imkanım yok muhtemelen kablo ile baglandıgımda wireless driverini kurulumda kurabilirde suan için yok kablo imkanım.

[if]

@Lazkopat, yabancı kelimeler kullanmayın lütfen. Onların güzel Türkçe karşılıkları var.

Bu[1] bağlantıdaki "STA no internet access" başlığındaki anlatımdan faydalanarak kurulum yapabilirsiniz.

[1] https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx

[Lazkopat]

@if verdiğin linki denedim ama beceremedim sanırım.Bu Ubuntu ne bela bir işletim sistemiymiş 2 gündür bir sürücüyü kuramadım yada bendemi problem anlamadım

[heartsmagic]

Bela değil, tanımadığın bir işletim sistemi sadece. Bela olarak nitelendireceksen lütfen bizleri de uğraştırma, kendin de uğraşma. Şu an kablosuz kartının sürücüleri kurulu değil, bir başka sistemde de mantık aynı değil midir? Sürücüleri bir şekilde bulup kurman lazım işte. Ne farkı var diğer sistemlerden?

Sistemin 12.04.3 ve 64bit.

http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb

Bu dosyayı indirip Ubuntu tarafına taşı, diyelim ki masaüstüne taşıdın ve sistem Türkçe:

Kod Seç Genişlet

sudo apt-get remove --purge bcmwl-kernel-source
cd Masaüstü (sistemin Türkçeyse)
cd Desktop (sistemin İngilizceyse)
sudo dpkg -i bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb

ile kurulu paket varsa kaldırır, ardından indirdiğin paketi kurarsın. Lütfen çıktıları bir kenara not edip buraya aktar, aksi takdirde doğru yapıp yapmadığını söyleyemeyiz sana. Sonra sistemi yeniden başlatır bu başlıkta verdiğin çıktıları tekrar verirsin.

[mc191]

ubuntuda deb uzantili dosya ile mi kurulum yapiyoruz?

[if]

Evet.

[Lazkopat]

Sonunda halloldu.Teşekkür ederim.Şuan bu mesajı Ubuntu işletim sisteminden yazıyorum

[mc191]

Sonunda halloldu.Teşekkür ederim.Şuan bu mesajı Ubuntu işletim sisteminden yazıyorum

simdi en son ne yaptiniz da halloldu hocam? ayni sorundan muzdaribim, cozumu yazarsaniz sevinirim

[Lazkopat]

@mc191   heartsmagic in attığı son mesajdakileri uyguladım halloldu.

[mc191]

@mc191   heartsmagic in attığı son mesajdakileri uyguladım halloldu.

tesekkurler cevap icin. deneyip sonucu yazacagim.

[heartsmagic]

@mc191, donanım ve sistem bilgilerin aynı değilse doğrudan uygulama öneriyi. Kartın aynı mı? Sistem 64bit mi?
@Lazkopat, çözülen başlıklarımız için: cozuldukonusu

[mc191]

@mc191, donanım ve sistem bilgilerin aynı değilse doğrudan uygulama öneriyi. Kartın aynı mı? Sistem 64bit mi?
@Lazkopat, çözülen başlıklarımız için: http://kb.ubuntu-tr.net/cozulen-basliklarin-etiketlenmesi

hocam kablo ile bagladim. ethernet driverini yuklememe bile gerek kalmadi. daha sonra broadcom un surucusunu indirip kurdum ek yazilimlardan. su an sorun kalmadi. cok tesekkur ederim.

[heartsmagic]

Diğer başlıkta zaten o öneriyi yapacaktım, aynı şeyi yapmışsın. Diğer başlığı bir arkadaşımız zaten kilitlemiş, bu başlığa da ben el atayım. @Lazkopat'ın yerine etiketi de ben koyayım bu defalık.