[Çözüldü] 13.04 İnternet Kopma Sorunu ile ilgili çıktılarım

[okanb3]

Merhabalar,

Çıktılarım;

cat /etc/lsb-release çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=13.04
DISTRIB_CODENAME=raring
DISTRIB_DESCRIPTION="Ubuntu 13.04"


uname -a Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ uname -a
Linux peynir-ubuntu 3.8.0-33-generic #48-Ubuntu SMP Wed Oct 23 09:16:58 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

lspci Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M / GTX 660M LE] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
04:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
05:00.0 Network controller: Intel Corporation Centrino Wireless-N 135 (rev c4)


lsusb Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 004: ID 046d:c21f Logitech, Inc. F710 Wireless Gamepad [XInput Mode]
Bus 001 Device 005: ID 8087:07da Intel Corp.
Bus 001 Device 006: ID 5986:030c Acer, Inc


rfkill list Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ rfkill list
0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


sudo lshw -C network Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ sudo lshw -C network
[sudo] password for peynir:
  *-network               
       açıklama: Eternet interface
       ürün: RTL8111/8168 PCI Express Gigabit Ethernet controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       mantıksal ad: eth0
       sürüm: 06
       serial: 8c:89:a5:03:c0:1f
       boyut: 10Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       kaynaklar: irq:43 ioport:c000(boyut=256) bellek:f3504000-f3504fff bellek:f3500000-f3503fff
  *-network
       açıklama: Kablosuz arayüz
       ürün: Centrino Wireless-N 135
       üretici: Intel Corporation
       physical id: 0
       bus info: pci@0000:05:00.0
       mantıksal ad: wlan0
       sürüm: c4
       serial: 0c:d2:92:03:76:ae
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=iwlwifi driverversion=3.8.0-33-generic firmware=18.168.6.1 ip=192.168.1.33 latency=0 link=yes multicast=yes wireless=IEEE 802.11bg
       kaynaklar: irq:46 bellek:f7c00000-f7c01fff
peynir@peynir-ubuntu:~/android$ sudo lshw -C network
  *-network               
       açıklama: Eternet interface
       ürün: RTL8111/8168 PCI Express Gigabit Ethernet controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       mantıksal ad: eth0
       sürüm: 06
       serial: 8c:89:a5:03:c0:1f
       boyut: 10Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       kaynaklar: irq:43 ioport:c000(boyut=256) bellek:f3504000-f3504fff bellek:f3500000-f3503fff
  *-network
       açıklama: Kablosuz arayüz
       ürün: Centrino Wireless-N 135
       üretici: Intel Corporation
       physical id: 0
       bus info: pci@0000:05:00.0
       mantıksal ad: wlan0
       sürüm: c4
       serial: 0c:d2:92:03:76:ae
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=iwlwifi driverversion=3.8.0-33-generic firmware=18.168.6.1 ip=192.168.1.33 latency=0 link=yes multicast=yes wireless=IEEE 802.11bg
       kaynaklar: irq:46 bellek:f7c00000-f7c01fff


ifconfig Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ ifconfig
eth0      Link encap:Ethernet  HWaddr 8c:89:a5:03:c0:1f 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:8009 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8009 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:735386 (735.3 KB)  TX bytes:735386 (735.3 KB)

wlan0     Link encap:Ethernet  HWaddr 0c:d2:92:03:76:ae 
          inet addr:192.168.1.33  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::ed2:92ff:fe03:76ae/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:54046 errors:0 dropped:0 overruns:0 frame:0
          TX packets:45699 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:71935497 (71.9 MB)  TX bytes:4761686 (4.7 MB)


iwconfig Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ iwconfig
eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:"Peynir" 
          Mode:Managed  Frequency:2.472 GHz  Access Point: B0:B2:DC:20:17:50   
          Bit Rate=54 Mb/s   Tx-Power=15 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=67/70  Signal level=-43 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:1052   Missed beacon:0


iwlist scanning Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ iwlist scanning
eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: B0:B2:DC:20:17:50
                    Channel:13
                    Frequency:2.472 GHz (Channel 13)
                    Quality=68/70  Signal level=-42 dBm 
                    Encryption key:on
                    ESSID:"Peynir"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000aca282640
                    Extra: Last beacon: 46040ms ago
                    IE: Unknown: 00065065796E6972
                    IE: Unknown: 010882848B0C12961824
                    IE: Unknown: 03010D
                    IE: Unknown: 0706545220010D14
                    IE: Unknown: 200100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C


lsmod Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ lsmod
Module                  Size  Used by
parport_pc             28152  0
ppdev                  17073  0
rfcomm                 42641  12
bnep                   18036  2
snd_hda_codec_hdmi     36906  1
snd_hda_codec_realtek    78399  1
joydev                 17377  0
xpad                   18042  0
uvcvideo               80847  0
ff_memless             13013  1 xpad
videobuf2_vmalloc      13056  1 uvcvideo
videobuf2_memops       13202  1 videobuf2_vmalloc
videobuf2_core         40513  1 uvcvideo
videodev              129260  2 uvcvideo,videobuf2_core
arc4                   12615  2
iwldvm                241872  0
mac80211              606457  1 iwldvm
coretemp               13355  0
kvm_intel             132891  0
kvm                   443165  1 kvm_intel
ghash_clmulni_intel    13259  0
aesni_intel            55399  2
aes_x86_64             17255  1 aesni_intel
xts                    12885  1 aesni_intel
lrw                    13257  1 aesni_intel
gf128mul               14951  2 lrw,xts
ablk_helper            13597  1 aesni_intel
cryptd                 20373  3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_intel          39619  6
snd_hda_codec         136498  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm                97451  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
microcode              22881  0
snd_rawmidi            30180  1 snd_seq_midi
snd_seq                61554  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29425  2 snd_pcm,snd_seq
nouveau               943184  0
snd                    68876  22 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device
i915                  600501  3
mxm_wmi                13021  1 nouveau
ttm                    83187  1 nouveau
iwlwifi               173516  1 iwldvm
wmi                    19070  2 mxm_wmi,nouveau
video                  19390  2 i915,nouveau
drm_kms_helper         49394  2 i915,nouveau
cfg80211              511019  3 iwlwifi,mac80211,iwldvm
rtsx_pci_ms            13011  0
drm                   286028  6 ttm,i915,drm_kms_helper,nouveau
btusb                  22474  0
bluetooth             228808  22 bnep,btusb,rfcomm
memstick               16554  1 rtsx_pci_ms
mac_hid                13205  0
psmouse                95905  0
serio_raw              13215  0
lpc_ich                17061  0
soundcore              12680  1 snd
i2c_algo_bit           13413  2 i915,nouveau
mei                    41158  0
lp                     17759  0
parport                46345  3 lp,ppdev,parport_pc
hid_logitech_dj        18604  0
usbhid                 47074  1 hid_logitech_dj
hid                   101289  2 usbhid,hid_logitech_dj
rtsx_pci_sdmmc         17475  0
r8169                  67466  0
rtsx_pci               34351  2 rtsx_pci_ms,rtsx_pci_sdmmc
ahci                   25731  2
libahci                31364  1 ahci
sdhci_pci              18590  0
sdhci                  32522  1 sdhci_pci


dmesg Çıktısı;

Kod Seç Genişlet

[    0.948752] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.948791] PPP generic driver version 2.4.2
[    0.948833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.948835] ehci-pci: EHCI PCI platform driver
[    0.948870] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.948873] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.948878] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.948890] ehci-pci 0000:00:1a.0: debug port 2
[    0.952791] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.952807] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d18000
[    0.964530] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.964548] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.964551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.964553] usb usb1: Product: EHCI Host Controller
[    0.964555] usb usb1: Manufacturer: Linux 3.8.0-33-generic ehci_hcd
[    0.964557] usb usb1: SerialNumber: 0000:00:1a.0
[    0.964639] hub 1-0:1.0: USB hub found
[    0.964643] hub 1-0:1.0: 2 ports detected
[    0.964736] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.964739] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.964742] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.964754] ehci-pci 0000:00:1d.0: debug port 2
[    0.968641] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.968653] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d17000
[    0.980509] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.980522] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.980524] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.980526] usb usb2: Product: EHCI Host Controller
[    0.980529] usb usb2: Manufacturer: Linux 3.8.0-33-generic ehci_hcd
[    0.980531] usb usb2: SerialNumber: 0000:00:1d.0
[    0.980610] hub 2-0:1.0: USB hub found
[    0.980612] hub 2-0:1.0: 2 ports detected
[    0.980685] ehci-platform: EHCI generic platform driver
[    0.980690] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.980698] uhci_hcd: USB Universal Host Controller Interface driver
[    0.980733] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.980737] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.980741] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.980838] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.980888] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.980930] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.980931] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.980933] usb usb3: Product: xHCI Host Controller
[    0.980934] usb usb3: Manufacturer: Linux 3.8.0-33-generic xhci_hcd
[    0.980935] usb usb3: SerialNumber: 0000:00:14.0
[    0.980993] xHCI xhci_add_endpoint called for root hub
[    0.980995] xHCI xhci_check_bandwidth called for root hub
[    0.981010] hub 3-0:1.0: USB hub found
[    0.981017] hub 3-0:1.0: 4 ports detected
[    0.981238] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.981241] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.981258] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.981260] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.981261] usb usb4: Product: xHCI Host Controller
[    0.981263] usb usb4: Manufacturer: Linux 3.8.0-33-generic xhci_hcd
[    0.981264] usb usb4: SerialNumber: 0000:00:14.0
[    0.981320] xHCI xhci_add_endpoint called for root hub
[    0.981321] xHCI xhci_check_bandwidth called for root hub
[    0.981335] hub 4-0:1.0: USB hub found
[    0.981341] hub 4-0:1.0: 4 ports detected
[    1.032538] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.043525] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.043530] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.043614] mousedev: PS/2 mouse device common for all mice
[    1.043739] rtc_cmos 00:05: RTC can wake from S4
[    1.043861] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.043891] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.043977] device-mapper: uevent: version 1.0.3
[    1.044024] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    1.044079] cpuidle: using governor ladder
[    1.044148] cpuidle: using governor menu
[    1.044151] ledtrig-cpu: registered to indicate activity on CPUs
[    1.044152] EFI Variables Facility v0.08 2004-May-17
[    1.044270] ashmem: initialized
[    1.044354] TCP: cubic registered
[    1.044421] NET: Registered protocol family 10
[    1.044536] NET: Registered protocol family 17
[    1.044544] Key type dns_resolver registered
[    1.044705] Loading module verification certificates
[    1.045468] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a8fef96353dd8a5250887ac531aa43944cf1e333'
[    1.045477] registered taskstats version 1
[    1.047446] Key type trusted registered
[    1.048965] Key type encrypted registered
[    1.050820] rtc_cmos 00:05: setting system clock to 2013-11-26 01:22:25 UTC (1385428945)
[    1.051377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.051378] EDD information not available.
[    1.053271] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.124460] ACPI: Battery Slot [BAT1] (battery present)
[    1.125562] Freeing unused kernel memory: 996k freed
[    1.125661] Write protecting the kernel read-only data: 12288k
[    1.127810] Freeing unused kernel memory: 1164k freed
[    1.129852] Freeing unused kernel memory: 1076k freed
[    1.138616] udevd[108]: starting version 175
[    1.160563] sdhci: Secure Digital Host Controller Interface driver
[    1.160566] sdhci: Copyright(c) Pierre Ossman
[    1.161577] sdhci-pci 0000:04:00.1: SDHCI controller found [10ec:5209] (rev 1)
[    1.161612] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.161617] mmc0: no vqmmc regulator found
[    1.161618] mmc0: no vmmc regulator found
[    1.161636] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.162493] Disabling lock debugging due to kernel taint
[    1.162878] ahci 0000:00:1f.2: version 3.0
[    1.162923] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.168326] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.168564] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    1.168733] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:03:c0:1f, XID 0c900800 IRQ 43
[    1.168736] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.176284] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.176289] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.176296] ahci 0000:00:1f.2: setting latency timer to 64
[    1.188174] scsi0 : ahci
[    1.188403] scsi1 : ahci
[    1.188579] scsi2 : ahci
[    1.188922] scsi3 : ahci
[    1.189061] scsi4 : ahci
[    1.189133] scsi5 : ahci
[    1.189211] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 42
[    1.189213] ata2: DUMMY
[    1.189216] ata3: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16200 irq 42
[    1.189217] ata4: DUMMY
[    1.189218] ata5: DUMMY
[    1.189219] ata6: DUMMY
[    1.192242] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[    1.192501] rtsx_pci 0000:04:00.0: irq 44 for MSI/MSI-X
[    1.192514] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
[    1.195416] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.231404] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.267282] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.276136] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.303297] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.408434] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.408442] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.408840] hub 1-1:1.0: USB hub found
[    1.409017] hub 1-1:1.0: 6 ports detected
[    1.507919] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.507956] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.509130] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.509140] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.509149] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.510224] ata1.00: ATA-8: Hitachi HTS727575A9E364, JF4OA0D0, max UDMA/133
[    1.510228] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.511630] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.511637] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.511641] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.512280] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.512285] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.512289] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.512722] ata1.00: configured for UDMA/133
[    1.512940] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72757 JF4O PQ: 0 ANSI: 5
[    1.513059] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.513062] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.513074] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.513107] sd 0:0:0:0: [sda] Write Protect is off
[    1.513109] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.513123] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.514456] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TM00, max UDMA/100
[    1.519880] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.521048] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.521058] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.521064] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.526920] ata3.00: configured for UDMA/100
[    1.539269] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208AB  TM00 PQ: 0 ANSI: 5
[    1.553337] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.553344] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.553566] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.553715] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.556465]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.556890] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.652115] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.652123] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.652496] hub 2-1:1.0: USB hub found
[    1.652581] hub 2-1:1.0: 6 ports detected
[    1.723613] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.819517] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b
[    1.819525] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.819528] usb 1-1.1: Product: USB Receiver
[    1.819531] usb 1-1.1: Manufacturer: Logitech
[    1.829184] usbcore: registered new interface driver usbhid
[    1.829187] usbhid: USB HID core driver
[    1.832592] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input2
[    1.836120] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/input/input4
[    1.836197] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1a.0-1.1:1
[    1.879375] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    1.879384] Switching to clocksource tsc
[    1.891424] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[    1.987153] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c21f
[    1.987163] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.987170] usb 1-1.2: Product: Wireless Gamepad F710
[    1.987174] usb 1-1.2: Manufacturer: Logitech
[    1.987179] usb 1-1.2: SerialNumber: B1C3D933
[    2.059188] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[    2.080908] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    2.155563] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07da
[    2.155571] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.226989] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[    2.367398] usb 1-1.4: New USB device found, idVendor=5986, idProduct=030c
[    2.367406] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.367411] usb 1-1.4: Product: BisonCam, NB Pro
[    2.367414] usb 1-1.4: Manufacturer: Bison
[   14.533764] Adding 8191996k swap on /dev/sda6.  Priority:-1 extents:1 across:8191996k
[   14.568520] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.603693] udevd[383]: starting version 175
[   14.808978] mei 0000:00:16.0: setting latency timer to 64
[   14.809030] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[   14.815739] lp: driver loaded but no devices found
[   14.817533] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[   14.817540] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.817544] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   14.817548] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20121018/utaddress-251)
[   14.817551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.817553] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   14.817556] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20121018/utaddress-251)
[   14.817559] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.817561] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.830136] Bluetooth: Core ver 2.16
[   14.830183] NET: Registered protocol family 31
[   14.830185] Bluetooth: HCI device and connection manager initialized
[   14.830191] Bluetooth: HCI socket layer initialized
[   14.830193] Bluetooth: L2CAP socket layer initialized
[   14.830200] Bluetooth: SCO socket layer initialized
[   14.837083] [drm] Initialized drm 1.1.0 20060810
[   14.838967] usbcore: registered new interface driver btusb
[   14.845614] cfg80211: Calling CRDA to update world regulatory domain
[   14.848318] wmi: Mapper loaded
[   14.855886] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   14.855889] Copyright(c) 2003-2012 Intel Corporation
[   14.856022] iwlwifi 0000:05:00.0: irq 46 for MSI/MSI-X
[   14.884474] [drm] Memory usable by graphics device = 2048M
[   14.884505] i915 0000:00:02.0: setting latency timer to 64
[   14.891347] MXM: GUID detected in BIOS
[   14.891510] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[   14.891538] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[   14.911911] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[   14.924920] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[   14.924931] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.924932] [drm] Driver supports precise vblank timestamp query.
[   14.925104] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.925107] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   14.950039] type=1400 audit(1385421759.411:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=635 comm="apparmor_parser"
[   14.950315] type=1400 audit(1385421759.411:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=635 comm="apparmor_parser"
[   14.950483] type=1400 audit(1385421759.415:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=635 comm="apparmor_parser"
[   14.995598] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[   14.997812] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[   14.999624] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[   15.000830] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   15.068296] iwlwifi 0000:05:00.0: loaded firmware version 18.168.6.1
[   15.080099] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   15.080102] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   15.080103] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   15.080104] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   15.080106] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_P2P disabled
[   15.080107] iwlwifi 0000:05:00.0: Detected Intel(R) Centrino(R) Wireless-N 135 BGN, REV=0x120
[   15.080160] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[   15.098747] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   15.147281] fbcon: inteldrmfb (fb0) is primary device
[   15.168148] cfg80211: World regulatory domain updated:
[   15.168149] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.168150] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.168150] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.168151] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.168152] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.168152] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.223507] Linux video capture interface: v2.00
[   15.230683] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:030c)
[   15.231831] input: Generic X-Box pad as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[   15.233622] usbcore: registered new interface driver xpad
[   15.234650] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[   15.234758] usbcore: registered new interface driver uvcvideo
[   15.234758] USB Video Class driver (1.1.1)
[   15.453583] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   15.773273] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f00)
[   15.790500] psmouse serio1: elantech: Synaptics capabilities query result 0x49, 0x15, 0x0c.
[   15.876832] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[   15.905316] Console: switching to colour frame buffer device 240x67
[   15.908492] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.908493] i915 0000:00:02.0: registered panic notifier
[   15.908652] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   15.925842] acpi device:13: registered as cooling_device9
[   15.925980] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   15.926013] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:11/LNXVIDEO:00/input/input8
[   15.943534] acpi device:49: registered as cooling_device10
[   15.943671] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.943704] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[   15.943771] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.944075] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e7110a2
[   15.944078] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[   15.944080] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[   15.945243] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   15.946506] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   15.994573] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   15.994575] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[   15.994628] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   15.994630] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[   16.017203] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.017277] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.017344] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   16.089527] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   16.089530] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[   16.089646] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   16.089648] nouveau  [   VBIOS][0000:01:00.0] version 80.07.1b.00.0b
[   16.089924] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[   16.089927] nouveau  [   VBIOS][0000:01:00.0] running init tables
[   16.127220] init: failsafe main process (896) killed by TERM signal
[   16.252331] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[   16.252334] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[   16.252335] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   16.305257] vga_switcheroo: enabled
[   16.305338] [TTM] Zone  kernel: Available graphics memory: 4036430 kiB
[   16.305340] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   16.305341] [TTM] Initializing pool allocator
[   16.305346] [TTM] Initializing DMA pool allocator
[   16.305359] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[   16.305362] nouveau  [     DRM] VRAM: 2048 MiB
[   16.305363] nouveau  [     DRM] GART: 512 MiB
[   16.305367] nouveau  [     DRM] BIT BIOS found
[   16.305369] nouveau  [     DRM] Bios version 80.07.1b.00
[   16.305372] nouveau  [     DRM] TMDS table version 2.0
[   16.305374] nouveau  [     DRM] DCB version 4.0
[   16.305383] [TTM] Finalizing pool allocator
[   16.305386] [TTM] Finalizing DMA pool allocator
[   16.305398] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[   16.305400] [TTM] Zone   dma32: Used memory at exit: 0 kiB
[   16.305402] vga_switcheroo: disabled
[   16.545776] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.545779] Bluetooth: BNEP filters: protocol multicast
[   16.545784] Bluetooth: BNEP socket layer initialized
[   16.546867] Bluetooth: RFCOMM TTY layer initialized
[   16.546876] Bluetooth: RFCOMM socket layer initialized
[   16.546879] Bluetooth: RFCOMM ver 1.11
[   16.711681] ppdev: user-space parallel port driver
[   16.731947] init: avahi-cups-reload main process (952) terminated with status 1
[   16.737682] type=1400 audit(1385421761.203:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=970 comm="apparmor_parser"
[   16.737987] type=1400 audit(1385421761.203:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=970 comm="apparmor_parser"
[   16.796378] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   17.593113] r8169 0000:03:00.0 eth0: link down
[   17.593152] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.593398] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.594850] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[   17.602441] iwlwifi 0000:05:00.0: Radio type=0x0-0x0-0x0
[   17.797307] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[   17.804920] iwlwifi 0000:05:00.0: Radio type=0x0-0x0-0x0
[   17.977297] type=1400 audit(1385421762.443:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1042 comm="apparmor_parser"
[   17.977578] type=1400 audit(1385421762.443:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1042 comm="apparmor_parser"
[   17.977726] type=1400 audit(1385421762.443:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1042 comm="apparmor_parser"
[   17.978784] type=1400 audit(1385421762.447:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1041 comm="apparmor_parser"
[   17.979008] type=1400 audit(1385421762.447:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1041 comm="apparmor_parser"
[   18.018424] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.018705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.921055] wlan0: authenticate with b0:b2:dc:20:17:50
[   18.937846] wlan0: send auth to b0:b2:dc:20:17:50 (try 1/3)
[   19.140996] wlan0: send auth to b0:b2:dc:20:17:50 (try 2/3)
[   19.142829] wlan0: authenticated
[   19.143020] iwlwifi 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   19.143024] iwlwifi 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   19.145006] wlan0: associate with b0:b2:dc:20:17:50 (try 1/3)
[   19.147477] wlan0: RX AssocResp from b0:b2:dc:20:17:50 (capab=0x431 status=0 aid=1)
[   19.157452] wlan0: associated
[   19.157497] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.157586] cfg80211: Calling CRDA for country: TR
[   19.160468] cfg80211: Regulatory domain changed to country: TR
[   19.160470] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.160472] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   19.160473] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   19.160474] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   19.189888] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by b0:b2:dc:20:17:50
[  237.595039] wlan0: deauthenticating from b0:b2:dc:20:17:50 by local choice (reason=3)
[  237.620222] cfg80211: Calling CRDA to update world regulatory domain
[  237.623716] cfg80211: World regulatory domain updated:
[  237.623720] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  237.623722] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  237.623724] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  237.623725] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  237.623727] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  237.623728] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  238.139339] wlan0: authenticate with b0:b2:dc:20:17:50
[  238.150416] wlan0: send auth to b0:b2:dc:20:17:50 (try 1/3)
[  238.152130] wlan0: authenticated
[  238.153038] iwlwifi 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[  238.153047] iwlwifi 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  238.153164] wlan0: associate with b0:b2:dc:20:17:50 (try 1/3)
[  238.155698] wlan0: RX AssocResp from b0:b2:dc:20:17:50 (capab=0x431 status=0 aid=1)
[  238.165057] wlan0: associated
[  238.165200] cfg80211: Calling CRDA for country: TR
[  238.167697] cfg80211: Regulatory domain changed to country: TR
[  238.167699] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  238.167700] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  238.167702] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  238.167703] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  238.206394] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by b0:b2:dc:20:17:50


dmesg | tail Çıktısı;

Kod Seç Genişlet

peynir@peynir-ubuntu:~/android$ dmesg | tail
[  238.153164] wlan0: associate with b0:b2:dc:20:17:50 (try 1/3)
[  238.155698] wlan0: RX AssocResp from b0:b2:dc:20:17:50 (capab=0x431 status=0 aid=1)
[  238.165057] wlan0: associated
[  238.165200] cfg80211: Calling CRDA for country: TR
[  238.167697] cfg80211: Regulatory domain changed to country: TR
[  238.167699] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  238.167700] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  238.167702] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  238.167703] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  238.206394] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by b0:b2:dc:20:17:50


Teşekkür ederim, şimdiden.

[heartsmagic]

Kopma kablolu bağlantıda mı kablosuz bağlantıda mı oluyor?

[okanb3]

Kablosuz bağlantı. Modemin marka modeli ise  ZyXEL P-660HW-T1 v3.

[heartsmagic]

Şu kenarda dursun:
http://askubuntu.com/questions/125531/wireless-connection-with-a-centrino-wireless-n-1000-wont-last-longer-than-20-se

Önce güçle alakalı öneriyi bir deneyelim.

Kod Seç Genişlet

sudo iwconfig wlan0 power off

Sonra normal kullanmayı denersin, bakalım kopma olacak mı.

[okanb3]

Maalesef. Bu öneriyi dün sorunu araştırırken ben de görmüş, denemiştim. Şimdi tekrar denedim fakat yine aynı.

[heartsmagic]

Peki şu öneriyi denedin mi?

Kod Seç Genişlet

echo 'options iwlagn 11n_disable=1' | sudo tee /etc/modprobe.d/iwlagn.conf >/dev/null

Daha güzeli, bizlere neleri araştırıp neleri denediğini aktar ki önerilerimizi eleyebilelim.

[okanb3]

Aslında araştırdım baya ama doğru düzgün bir şey bulamadım. Forumdaki konulara falan da baktım ama mantıklı bir şey bulamadığımdan, bu konuları çok da bilmediğimden değiştirmek istemedim.

Onun haricinde ipv6 kısmını yoksay yapmayı, elle ip vermeyi; dns koymayı vs. denedim. Bir de o kodu denemiştim işte fakat o da n-1000 için, benim ağ kartım n-135.

Verdiğiniz öneriyi az önce denedim fakat sonuç yine aynı. Normalde Ubuntu ile evdeki modemim arasında bir sıkıntı yok, kopma yaşamıyorum. Fakat buradaki modemle anlaşamıyor Ubuntu.

Bu arada evdeki modemim Airties Air 5340

[matrax_41]

Sorun ağ kartından değil de modemden kaynaklanıyor sanırım. Bende de aynı modem var ve kablolu bağlanıyorum. Aynı sorun bende de var arada internet bağlantısı gidiyor.

[okanb3]

Peki muhtemel bir çözüm yöntemi var mı modemin arayüzünden yapabileceğim?

[matrax_41]

Ben de çok aramıştım ama bir çözüm bulamadım.

[if]

@matrax_42, MTU değiştirmeyi denemiş miydiniz?

[speakerXXL]

lsmod Çıktısı;

peynir@peynir-ubuntu:~/android$ lsmod
iwlwifi               173516  1 iwldvm

iwlagn modülü yerine etkin olan iwlwifi modülü için n kipini kapatmak denenebilir. Aşağıdaki komut ile bir değişiklik oluyor mu?

Kod Seç Genişlet

sudo rmmod iwlwifi
sudo modprobe iwlwifi 11n_disable=1

[matrax_41]

@if, MTU'da bir değişiklik yapmadım. Standart olan 1492 duruyor.

[okanb3]

Sorunu çözdüm sanırım. İnternette araştırırken şöyle bir site, akabinde de bir çözüm buldum;

http://zyxelbaglantikopmasorunu.blogspot.com/

Kullanıcıların geneli kopmayı Windows üzerinde yaşıyormuş. Önerilen muhtemel çözümü denedim ve yarım saattir bir kopma yaşamadım. Daha uzun süreli test etmek isterdim fakat şimdi çıkmam gerekiyor ve çıkmadan konuya yazmak istedim.

Teşekkür ederim yardımcı olmaya çalışan herkese. İyi günler...

[heartsmagic]

Kaynaktaki çözümü de geçelim kabaca buraya:

'Birinci DNS' ve İkinci 'DNS' kısımlarını 'Kullanıcı Tanımlı' ya çevirin. Resimdeki sayıları aynen giriniz.
          (195.175.39.39 - 195.175.39.40 )

a. Sol sütundan 'NAT' yazısına tıklayınız.
    b. Sağ tarafta açılan sayfada 'Maksimum NAT / Kullanıcı Başına Oturum Açma Sayısı' yazan kısımının karşısındaki '512' yi '2048' yapın

Modeminizin arkasındaki tuştan açıp kapatınız. Sonra 3-4 dakika sabırla bekleyin. Bekledikten sonra interneti kesintisiz olarak kullanmaya başlayın


**** Eğer ki 4. aşamanın b'sinde yaptığımız '2048' değerini kabul etmezse '1024' yazıp 'Uygula' tuşuna basınız.