[ÇÖZÜLDÜ] Kablosuz Bağlanti Sorunu - Ağları Görmüyor

Başlatan danis, 18 Ekim 2013 - 11:37:39

« önceki - sonraki »

0 Üyeler ve 3 Ziyaretçi konuyu incelemekte.

danis

İyi günler arkadaşlar, Pardus'a yeni geçtim.
herşeyi çok güzel ama şu internet işini çözemedim bir türlü. Daha önce 2007.2 Caracal caracal sürümünü kullanmıştım, ama bu yeni sürüm oldukça karmaşık geldi.
Ağ arayüzü bölümünde "Kablosuz ağ arayüzü - Kullanılamaz" ibaresi var. Bağlantılar - Kablosuz bağlantı ekleme kısmında ise herhangi bir kablosuz ağı görmüyor.
Format atmadan önce windows'ta klavye üzerinden wireless'i kapatmıştım. Işık hala kırmızı yanıyor. Ses açma-kapma tuşunu ise istediğim gibi kullanabiliyorum. Forumlada bios'tan açma gibi öneriler okudum ancak biosta öyle * bir şey bulamadım.
Donanımsal bir eksiklik mi yoksa tuştan mı kaynaklanıyor yardım çözemedim bir türlü.
Bilgisayarım Hp Pavilion G6 2211et win8 dışında sürücü yayınlamadılar.
Konu açılırken aktarılması gereken kodlar bunlar galiba
root@danis:/home/yakup/Belgeler# cat /etc/lsb-release
DISTRIB_ID=Debian
DISTRIB_RELEASE=2.0
DISTRIB_CODENAME=sid
DISTRIB_DESCRIPTION="Pardus Topluluk 2.0 KDE"


root@danis:/home/yakup/Belgeler# uname -a
Linux danis 3.10-3-amd64 #1 SMP Debian 3.10.11-1 (2013-09-10) x86_64 GNU/Linux


root@danis:/home/yakup/Belgeler# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
07:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
07:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)


root@danis:/home/yakup/Belgeler# lsusb
Bus 004 Device 003: ID 05c8:0348 Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


root@danis:/home/yakup/Belgeler# rfkill list
0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: yes

root@danis:/home/yakup/Belgeler# sudo lshw -C network
  *-network DISABLED     
       description: Wireless interface
       product: RT3290 Wireless 802.11n 1T/1R PCIe
       vendor: Ralink corp.
       physical id: 0
       bus info: pci@0000:07:00.0
       logical name: wlan0
       version: 00
       serial: 68:94:23:a7:3b:19
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=rt2800pci driverversion=3.10-3-amd64 firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       resources: irq:16 memory:c3510000-c351ffff
  *-network
       description: Ethernet interface
       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:08:00.0
       logical name: eth0
       version: 05
       serial: 84:34:97:76:87:e1
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.1.6 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:42 ioport:3000(size=256) memory:c3404000-c3404fff memory:c3400000-c3403fff


root@danis:/home/yakup/Belgeler# ifconfig
eth0      Link encap:Ethernet  HWaddr 84:34:97:76:87:e1 
          inet addr:192.168.1.6  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::8634:97ff:fe76:87e1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:14240 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13694 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:13073868 (12.4 MiB)  TX bytes:1904203 (1.8 MiB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:369 errors:0 dropped:0 overruns:0 frame:0
          TX packets:369 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:30958 (30.2 KiB)  TX bytes:30958 (30.2 KiB)


root@danis:/home/yakup/Belgeler# iwconfig
eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on

root@danis:/home/yakup/Belgeler# iwlist scanning
eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Network is down


root@danis:/home/yakup/Belgeler# lsmod
Module                  Size  Used by
parport_pc             22409  0
ppdev                  12763  0
lp                     13025  0
parport                31901  3 lp,ppdev,parport_pc
bnep                   17535  2
rfcomm                 33471  0
cpufreq_powersave      12454  0
bluetooth             170002  10 bnep,rfcomm
cpufreq_userspace      12576  0
cpufreq_conservative    14184  0
cpufreq_stats          12866  0
binfmt_misc            12925  1
uinput                 17439  1
nfsd                  192007  2
auth_rpcgss            39085  1 nfsd
oid_registry           12419  1 auth_rpcgss
nfs_acl                12511  1 nfsd
nfs                   110304  0
lockd                  59673  2 nfs,nfsd
dns_resolver           12641  1 nfs
fscache                37551  1 nfs
sunrpc                164583  6 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fuse                   67503  1
ecryptfs               72544  0
dm_crypt               18457  0
wl                   4128894  0
uvcvideo               66788  0
lib80211               12941  1 wl
videobuf2_vmalloc      12848  1 uvcvideo
arc4                   12543  2
snd_hda_codec_hdmi     31720  1
videobuf2_memops       12519  1 videobuf2_vmalloc
videobuf2_core         31098  1 uvcvideo
videodev               92407  2 uvcvideo,videobuf2_core
snd_hda_codec_idt      40529  1
joydev                 17278  0
rt2800pci              14101  0
coretemp               12898  0
rt2800lib              56580  1 rt2800pci
rt2x00pci              12564  1 rt2800pci
rt2x00mmio             12601  1 rt2800pci
kvm_intel             123583  0
kvm                   301458  1 kvm_intel
media                  18240  2 uvcvideo,videodev
snd_hda_intel          35718  3
snd_hda_codec         122850  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
rt2x00lib              38614  4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio
mac80211              358182  3 rt2x00lib,rt2x00pci,rt2800lib
cfg80211              319971  3 wl,mac80211,rt2x00lib
crc_ccitt              12347  1 rt2800lib
snd_hwdep              13189  1 snd_hda_codec
snd_pcm_oss            41175  0
snd_mixer_oss          18034  1 snd_pcm_oss
eeprom_93cx6           12720  1 rt2800pci
snd_pcm                68525  4 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         13018  2 snd_pcm,snd_hda_intel
hp_accel               25200  0
hp_wmi                 13287  0
crc32c_intel           21850  0
ghash_clmulni_intel    13062  0
aesni_intel            50895  0
snd_seq_midi           12848  0
iTCO_wdt               12831  0
iTCO_vendor_support    12704  1 iTCO_wdt
sparse_keymap          12760  1 hp_wmi
mei_me                 13568  0
lis3lv02d              17926  1 hp_accel
snd_seq_midi_event     13316  1 snd_seq_midi
rtsx_pci_ms            12848  0
snd_rawmidi            23040  1 snd_seq_midi
aes_x86_64             16719  1 aesni_intel
ablk_helper            12572  1 aesni_intel
cryptd                 14560  3 ghash_clmulni_intel,aesni_intel,ablk_helper
lrw                    12871  1 aesni_intel
gf128mul               13047  1 lrw
glue_helper            12768  1 aesni_intel
rfkill                 19242  4 cfg80211,hp_wmi,bluetooth
input_polldev          12906  1 lis3lv02d
mei                    45886  1 mei_me
snd_seq                45186  2 snd_seq_midi_event,snd_seq_midi
microcode              30413  0
memstick               13740  1 rtsx_pci_ms
lpc_ich                16757  0
snd_seq_device         13176  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              22773  2 snd_pcm,snd_seq
snd                    53068  18 snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
soundcore              13026  1 snd
psmouse                74832  0
serio_raw              12940  0
pcspkr                 12632  0
i2c_i801               17045  0
mperf                  12453  0
battery                13101  0
evdev                  17611  24
processor              28526  0
ac                     12668  0
fglrx                5171755  0
ext4                  381419  1
crc16                  12343  2 ext4,bluetooth
jbd2                   76205  1 ext4
mbcache                13082  1 ext4
btrfs                 641551  0
xor                    16985  1 btrfs
raid6_pq               95431  1 btrfs
crc32c                 12656  1
libcrc32c              12426  1 btrfs
zlib_deflate           25638  1 btrfs
dm_mod                 64008  1 dm_crypt
sg                     26095  0
sr_mod                 21988  0
sd_mod                 40541  2
cdrom                  35212  1 sr_mod
crc_t10dif             12348  1 sd_mod
hid_generic            12393  0
usbhid                 40964  0
hid                    81894  3 hid_generic,usbhid
rtsx_pci_sdmmc         17215  0
mmc_core               77762  1 rtsx_pci_sdmmc
ahci                   25148  1
libahci                23136  1 ahci
rtsx_pci               24569  2 rtsx_pci_ms,rtsx_pci_sdmmc
mfd_core               12601  2 lpc_ich,rtsx_pci
libata                141969  2 ahci,libahci
scsi_mod              158249  4 sg,libata,sd_mod,sr_mod
r8169                  52872  0
mii                    12675  1 r8169
ehci_pci               12472  0
ehci_hcd               40590  1 ehci_pci
wmi                    13243  1 hp_wmi
thermal                17468  0
i915                  494628  3
video                  17792  1 i915
i2c_algo_bit           12841  1 i915
drm_kms_helper         31837  1 i915
xhci_hcd               78280  0
button                 12944  2 i915,fglrx
drm                   211856  4 i915,drm_kms_helper
i2c_core               24353  6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
thermal_sys            23137  3 video,thermal,processor
usbcore               134993  5 uvcvideo,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common             12440  1 usbcore


root@danis:/home/yakup/Belgeler# dmesg
[    0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-13
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10-3-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64 root=UUID=8ebf5c40-5661-483f-8b77-47a6f70bce60 ro modprobe.blacklist=floppy,nouveau splash quiet --
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a6befff] usable
[    0.000000] BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion g6 Notebook PC/183E, BIOS F.14 09/20/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09B000000 mask FFF000000 uncachable
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 base 15F600000 mask FFFE00000 uncachable
[    0.000000]   7 base 15F800000 mask FFF800000 uncachable
[    0.000000]   8 base 160000000 mask FE0000000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0186e000, 0x0186efff] PGTABLE
[    0.000000] BRK [0x0186f000, 0x0186ffff] PGTABLE
[    0.000000] BRK [0x01870000, 0x01870fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[    0.000000]  [mem 0x15f400000-0x15f5fffff] page 2M
[    0.000000] BRK [0x01871000, 0x01871fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
[    0.000000]  [mem 0x15c000000-0x15f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x15bffffff] page 2M
[    0.000000] BRK [0x01872000, 0x01872fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01873000, 0x01873fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0x9a6befff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0x9a5fffff] page 2M
[    0.000000]  [mem 0x9a600000-0x9a6befff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[    0.000000]  [mem 0x9afff000-0x9affffff] page 4k
[    0.000000] RAMDISK: [mem 0x34de2000-0x366e8fff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 000000009affe210 0009C (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
[    0.000000] ACPI: FACP 000000009affb000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: DSDT 000000009afe9000 0E8EF (v01 HPQOEM INSYDE   00000000 INTL 00040000)
[    0.000000] ACPI: FACS 000000009afba000 00040
[    0.000000] ACPI: UEFI 000000009affd000 00236 (v01 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: ASF! 000000009affc000 000A5 (v32 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: HPET 000000009affa000 00038 (v01 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: APIC 000000009aff9000 0008C (v03 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: MCFG 000000009aff8000 0003C (v01 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: WDAT 000000009afe8000 00224 (v01 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 000000009afe7000 00E21 (v01 HPQOEM INSYDE   00001000 INTL 00040000)
[    0.000000] ACPI: BOOT 000000009afe5000 00028 (v01 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: ASPT 000000009afe3000 00034 (v07 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: DBGP 000000009afe2000 00034 (v01 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: FPDT 000000009afe0000 00044 (v01 HPQOEM 183E     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 000000009afde000 00968 (v01 HPQOEM INSYDE   00003000 INTL 00040000)
[    0.000000] ACPI: SSDT 000000009afdd000 00A92 (v01 HPQOEM INSYDE   00003000 INTL 00040000)
[    0.000000] ACPI: SSDT 000000009afda000 01EED (v01 HPQOEM INSYDE   00001000 INTL 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff]
[    0.000000]   NODE_DATA [mem 0x15f5f8000-0x15f5fbfff]
[    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015ac00000-ffff88015e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0x9a6befff]
[    0.000000]   node   0: [mem 0x9afff000-0x9affffff]
[    0.000000]   node   0: [mem 0x100000000-0x15f5fffff]
[    0.000000] On node 0 totalpages: 1022555
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8585 pages used for memmap
[    0.000000]   DMA32 zone: 627903 pages, LIFO batch:31
[    0.000000]   Normal zone: 5341 pages used for memmap
[    0.000000]   Normal zone: 390656 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[    0.000000] PM: Registered nosave memory: 000000009a6bf000 - 000000009aebf000
[    0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[    0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[    0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[    0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015f200000 s84928 r8192 d21568 u262144
[    0.000000] pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1008552
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64 root=UUID=8ebf5c40-5661-483f-8b77-47a6f70bce60 ro modprobe.blacklist=floppy,nouveau splash quiet --
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3929228k/5756928k available (3643k kernel code, 1666708k absent, 160992k reserved, 3126k data, 920k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2494.417 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.83 BogoMIPS (lpj=9977668)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000031] Security Framework initialized
[    0.000034] AppArmor: AppArmor disabled by boot time parameter
[    0.000035] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.000264] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001268] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001707] Mount-cache hash table entries: 256
[    0.001863] Initializing cgroup subsys memory
[    0.001872] Initializing cgroup subsys devices
[    0.001874] Initializing cgroup subsys freezer
[    0.001875] Initializing cgroup subsys net_cls
[    0.001877] Initializing cgroup subsys blkio
[    0.001878] Initializing cgroup subsys perf_event
[    0.001902] CPU: Physical Processor ID: 0
[    0.001903] CPU: Processor Core ID: 0
[    0.001907] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001907] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002266] mce: CPU supports 7 MCE banks
[    0.002276] CPU0: Thermal monitoring enabled (TM1)
[    0.002285] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002285] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002285] tlb_flushall_shift: 1
[    0.002379] Freeing SMP alternatives: 12k freed
[    0.002732] ACPI: Core revision 20130328
[    0.008373] ACPI: All ACPI Tables successfully acquired
[    0.025199] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064929] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
[    0.064935] TSC deadline timer enabled
[    0.064943] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[    0.064950] ... version:                3
[    0.064951] ... bit width:              48
[    0.064952] ... generic registers:      4
[    0.064953] ... value mask:             0000ffffffffffff
[    0.064954] ... max period:             000000007fffffff
[    0.064955] ... fixed-purpose events:   3
[    0.064956] ... event mask:             000000070000000f
[    0.078829] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.089527] CPU2 microcode updated early to revision 0x19, date = 2013-06-13
[    0.065199] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.106035] Brought up 4 CPUs
[    0.106038] smpboot: Total of 4 processors activated (19955.33 BogoMIPS)
[    0.109167] devtmpfs: initialized
[    0.112196] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[    0.112371] regulator-dummy: no parameters
[    0.112424] NET: Registered protocol family 16
[    0.112546] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.112548] ACPI: bus type PCI registered
[    0.112550] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.112608] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.112611] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.123596] PCI: Using configuration type 1 for base access
[    0.123773] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.123774] mtrr: probably your BIOS does not setup all CPUs.
[    0.123774] mtrr: corrected configuration.
[    0.124227] bio: create slab <bio-0> at 0
[    0.124334] ACPI: Added _OSI(Module Device)
[    0.124336] ACPI: Added _OSI(Processor Device)
[    0.124337] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.124339] ACPI: Added _OSI(Processor Aggregator Device)
[    0.125576] ACPI: EC: Look up EC in DSDT
[    0.126775] ACPI: Executed 1 blocks of module-level executable AML code
[    0.150203] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.150635] ACPI: SSDT 000000009ae5b018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.150959] ACPI: Dynamic OEM Table Load:
[    0.150961] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.160850] ACPI: SSDT 000000009ae5ca98 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.161207] ACPI: Dynamic OEM Table Load:
[    0.161209] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.170236] ACPI: SSDT 000000009ae15d98 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.170551] ACPI: Dynamic OEM Table Load:
[    0.170552] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    1.027014] ACPI: Interpreter enabled
[    1.027023] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    1.027028] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    1.027043] ACPI: (supports S0 S3 S4 S5)
[    1.027044] ACPI: Using IOAPIC for interrupt routing
[    1.027074] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.027168] ACPI: No dock devices found.
[    1.033610] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.033680] \_SB_.PCI0:_OSC invalid UUID
[    1.033681] _OSC request data:1 8 0
[    1.034282] PCI host bridge to bus 0000:00
[    1.034285] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.034287] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.034289] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.034291] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.034293] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[    1.034300] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    1.034372] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    1.034402] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.034432] pci 0000:00:01.0: System wakeup disabled by ACPI
[    1.034468] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    1.034478] pci 0000:00:02.0: reg 10: [mem 0xc3000000-0xc33fffff 64bit]
[    1.034483] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    1.034488] pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]
[    1.034580] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    1.034603] pci 0000:00:14.0: reg 10: [mem 0xc3600000-0xc360ffff 64bit]
[    1.034674] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.034708] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.034744] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    1.034768] pci 0000:00:16.0: reg 10: [mem 0xc3614000-0xc361400f 64bit]
[    1.034844] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.034919] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    1.034940] pci 0000:00:1a.0: reg 10: [mem 0xc3619000-0xc36193ff]
[    1.035030] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.035249] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.035287] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    1.035303] pci 0000:00:1b.0: reg 10: [mem 0xc3610000-0xc3613fff 64bit]
[    1.035372] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.035410] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.035443] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    1.035521] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.035559] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.035592] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    1.035671] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.035708] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.035742] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    1.035823] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.035861] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    1.035904] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    1.035925] pci 0000:00:1d.0: reg 10: [mem 0xc3618000-0xc36183ff]
[    1.036015] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.036230] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.036267] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    1.036430] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    1.036448] pci 0000:00:1f.2: reg 10: [io  0x5088-0x508f]
[    1.036457] pci 0000:00:1f.2: reg 14: [io  0x5094-0x5097]
[    1.036465] pci 0000:00:1f.2: reg 18: [io  0x5080-0x5087]
[    1.036473] pci 0000:00:1f.2: reg 1c: [io  0x5090-0x5093]
[    1.036481] pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
[    1.036489] pci 0000:00:1f.2: reg 24: [mem 0xc3617000-0xc36177ff]
[    1.036534] pci 0000:00:1f.2: PME# supported from D3hot
[    1.036595] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    1.036611] pci 0000:00:1f.3: reg 10: [mem 0xc3615000-0xc36150ff 64bit]
[    1.036632] pci 0000:00:1f.3: reg 20: [io  0x5040-0x505f]
[    1.036743] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    1.036755] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[    1.036763] pci 0000:01:00.0: reg 18: [mem 0xc2000000-0xc201ffff 64bit]
[    1.036770] pci 0000:01:00.0: reg 20: [io  0x4000-0x40ff]
[    1.036781] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    1.036807] pci 0000:01:00.0: supports D1 D2
[    1.036824] pci 0000:01:00.0: System wakeup disabled by ACPI
[    1.046541] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    1.046546] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.046551] pci 0000:00:01.0:   bridge window [mem 0xc2000000-0xc2ffffff]
[    1.046558] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.048289] pci 0000:07:00.0: [1814:3290] type 00 class 0x028000
[    1.048309] pci 0000:07:00.0: reg 10: [mem 0xc3510000-0xc351ffff]
[    1.048450] pci 0000:07:00.0: PME# supported from D0 D3hot
[    1.050156] pci 0000:07:00.1: [1814:3298] type 00 class 0x0d1100
[    1.050175] pci 0000:07:00.1: reg 10: [mem 0xc3500000-0xc350ffff]
[    1.050316] pci 0000:07:00.1: supports D1
[    1.050317] pci 0000:07:00.1: PME# supported from D0 D1 D3hot
[    1.063352] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    1.063359] pci 0000:00:1c.0:   bridge window [mem 0xc3500000-0xc35fffff]
[    1.063449] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[    1.063469] pci 0000:08:00.0: reg 10: [io  0x3000-0x30ff]
[    1.063503] pci 0000:08:00.0: reg 18: [mem 0xc3404000-0xc3404fff 64bit pref]
[    1.063525] pci 0000:08:00.0: reg 20: [mem 0xc3400000-0xc3403fff 64bit pref]
[    1.063619] pci 0000:08:00.0: supports D1 D2
[    1.063620] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.063670] pci 0000:08:00.0: System wakeup disabled by ACPI
[    1.072080] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    1.072088] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    1.072109] pci 0000:00:1c.1:   bridge window [mem 0xc3400000-0xc34fffff 64bit pref]
[    1.072268] pci 0000:09:00.0: [10ec:5229] type 00 class 0xff0000
[    1.072329] pci 0000:09:00.0: reg 10: [mem 0xc1000000-0xc1000fff]
[    1.072822] pci 0000:09:00.0: supports D1 D2
[    1.072824] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
[    1.080139] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[    1.080143] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    1.080147] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc1ffffff]
[    1.080153] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    1.080227] \_SB_.PCI0:_OSC invalid UUID
[    1.080229] _OSC request data:1 1f 0
[    1.080232] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    1.080234] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    1.080658] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.080711] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.080763] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.080814] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.080864] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.080915] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.080965] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.081016] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.081247] ACPI: Enabled 4 GPEs in block 00 to 3F
[    1.081255] acpi root: \_SB_.PCI0 notify handler is installed
[    1.081296] Found 1 acpi root devices
[    1.081336] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    1.081440] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.081445] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.081446] vgaarb: loaded
[    1.081447] vgaarb: bridge control possible 0000:01:00.0
[    1.081448] vgaarb: no bridge control possible 0000:00:02.0
[    1.081485] PCI: Using ACPI for IRQ routing
[    1.088818] PCI: pci_cache_line_size set to 64 bytes
[    1.088896] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    1.088898] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    1.088899] e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
[    1.088901] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[    1.088902] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[    1.089017] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.089022] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.091035] Switching to clocksource hpet
[    1.092431] pnp: PnP ACPI init
[    1.092441] ACPI: bus type PNP registered
[    1.092673] pnp 00:00: [dma 4]
[    1.092695] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.092715] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    1.092802] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.092830] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.092874] system 00:04: [io  0x0680-0x069f] has been reserved
[    1.092877] system 00:04: [io  0x1000-0x100f] has been reserved
[    1.092879] system 00:04: [io  0xffff] has been reserved
[    1.092881] system 00:04: [io  0xffff] has been reserved
[    1.092883] system 00:04: [io  0x0400-0x0453] has been reserved
[    1.092885] system 00:04: [io  0x0458-0x047f] has been reserved
[    1.092887] system 00:04: [io  0x0500-0x057f] has been reserved
[    1.092889] system 00:04: [io  0x164e-0x164f] has been reserved
[    1.092891] system 00:04: [io  0x0454-0x0457] has been reserved
[    1.092893] system 00:04: [io  0x0380-0x0387] has been reserved
[    1.092895] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.092921] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.092975] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    1.093009] pnp 00:07: Plug and Play ACPI device, IDs SYN1e60 SYN1e00 SYN0002 PNP0f13 (active)
[    1.093050] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
[    1.093255] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.093258] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.093259] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.093261] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.093265] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    1.093267] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.093269] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.093271] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.093273] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.093275] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    1.093277] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.093473] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    1.093475] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[    1.093477] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.093493] pnp: PnP ACPI: found 11 devices
[    1.093494] ACPI: bus type PNP unregistered
[    1.099763] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.099799] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2020000-0xc203ffff pref]
[    1.099801] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    1.099803] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.099806] pci 0000:00:01.0:   bridge window [mem 0xc2000000-0xc2ffffff]
[    1.099809] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.099812] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    1.099818] pci 0000:00:1c.0:   bridge window [mem 0xc3500000-0xc35fffff]
[    1.099826] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    1.099829] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    1.099837] pci 0000:00:1c.1:   bridge window [mem 0xc3400000-0xc34fffff 64bit pref]
[    1.099843] pci 0000:00:1c.2: PCI bridge to [bus 09-0e]
[    1.099846] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    1.099852] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc1ffffff]
[    1.099856] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[    1.100126] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.100128] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.100130] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.100132] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[    1.100134] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    1.100135] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc2ffffff]
[    1.100137] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    1.100139] pci_bus 0000:07: resource 1 [mem 0xc3500000-0xc35fffff]
[    1.100141] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    1.100143] pci_bus 0000:08: resource 2 [mem 0xc3400000-0xc34fffff 64bit pref]
[    1.100144] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    1.100146] pci_bus 0000:09: resource 1 [mem 0xc1000000-0xc1ffffff]
[    1.100148] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[    1.100203] NET: Registered protocol family 2
[    1.100405] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    1.100515] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.100597] TCP: Hash tables configured (established 32768 bind 32768)
[    1.100614] TCP: reno registered
[    1.100621] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.100636] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.100713] NET: Registered protocol family 1
[    1.100725] pci 0000:00:02.0: Boot video device
[    1.131239] PCI: CLS 64 bytes, default 64
[    1.131276] Unpacking initramfs...
[    1.533525] Freeing initrd memory: 25628k freed
[    1.536549] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.536554] software IO TLB [mem 0x966bf000-0x9a6bf000] (64MB) mapped at [ffff8800966bf000-ffff88009a6befff]
[    1.536603] Simple Boot Flag at 0x44 set to 0x1
[    1.536939] audit: initializing netlink socket (disabled)
[    1.536949] type=2000 audit(1382092892.512:1): initialized
[    1.552181] bounce pool size: 64 pages
[    1.552185] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.552554] VFS: Disk quotas dquot_6.5.2
[    1.552576] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.552646] msgmni has been set to 7724
[    1.552854] alg: No test for stdrng (krng)
[    1.552876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.552910] io scheduler noop registered
[    1.552911] io scheduler deadline registered
[    1.552927] io scheduler cfq registered (default)
[    1.552990] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.553154] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.553166] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.553213] intel_idle: MWAIT substates: 0x21120
[    1.553215] intel_idle: v0.4 model 0x3A
[    1.553216] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.553255] GHES: HEST is not enabled!
[    1.553299] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.553746] Linux agpgart interface v0.103
[    1.553836] i8042: PNP: PS/2 Controller [PNP0303:P2K8,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.561408] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.561413] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.561508] mousedev: PS/2 mouse device common for all mice
[    1.561597] rtc_cmos 00:05: RTC can wake from S4
[    1.561714] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.561742] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.561749] Intel P-state driver initializing.
[    1.561757] Intel pstate controlling: cpu 0
[    1.561771] Intel pstate controlling: cpu 1
[    1.561782] Intel pstate controlling: cpu 2
[    1.561791] Intel pstate controlling: cpu 3
[    1.561900] cpuidle: using governor ladder
[    1.562011] cpuidle: using governor menu
[    1.562084] TCP: cubic registered
[    1.562136] NET: Registered protocol family 10
[    1.562308] mip6: Mobile IPv6
[    1.562310] NET: Registered protocol family 17
[    1.562533] PM: Hibernation image not present or could not be loaded.
[    1.562540] registered taskstats version 1
[    1.563156] rtc_cmos 00:05: setting system clock to 2013-10-18 10:41:32 UTC (1382092892)
[    1.564020] Freeing unused kernel memory: 920k freed
[    1.564126] Write protecting the kernel read-only data: 6144k
[    1.565304] Freeing unused kernel memory: 444k freed
[    1.566492] Freeing unused kernel memory: 492k freed
[    1.574516] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.643121] systemd-udevd[70]: starting version 204
[    1.659517] ACPI: bus type USB registered
[    1.659558] usbcore: registered new interface driver usbfs
[    1.659573] usbcore: registered new interface driver hub
[    1.662985] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.663072] usbcore: registered new device driver usb
[    1.664408] [drm] Initialized drm 1.1.0 20060810
[    1.664492] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.664498] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.664506] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.664622] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.664651] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.664719] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.664723] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.664726] usb usb1: Product: xHCI Host Controller
[    1.664728] usb usb1: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
[    1.664731] usb usb1: SerialNumber: 0000:00:14.0
[    1.665020] ACPI: Lid Switch [LID0]
[    1.665097] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.665104] ACPI: Power Button [PWRB]
[    1.665183] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.665187] ACPI: Power Button [PWRF]
[    1.666752] xHCI xhci_add_endpoint called for root hub
[    1.666756] xHCI xhci_check_bandwidth called for root hub
[    1.666804] hub 1-0:1.0: USB hub found
[    1.666816] hub 1-0:1.0: 4 ports detected
[    1.668473] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.668481] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.668515] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.668518] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.668521] usb usb2: Product: xHCI Host Controller
[    1.668524] usb usb2: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
[    1.668526] usb usb2: SerialNumber: 0000:00:14.0
[    1.668646] xHCI xhci_add_endpoint called for root hub
[    1.668649] xHCI xhci_check_bandwidth called for root hub
[    1.668690] hub 2-0:1.0: USB hub found
[    1.668701] hub 2-0:1.0: 4 ports detected
[    1.680703] wmi: Mapper loaded
[    1.681282] [Firmware Bug]: Invalid critical threshold (0)
[    1.682470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.682681] ehci-pci: EHCI PCI platform driver
[    1.683431] thermal LNXTHERM:00: registered as thermal_zone0
[    1.683435] ACPI: Thermal Zone [TZ01] (40 C)
[    1.684577] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.684819] r8169 0000:08:00.0: irq 42 for MSI/MSI-X
[    1.685028] r8169 0000:08:00.0 eth0: RTL8105e at 0xffffc90000626000, 84:34:97:76:87:e1, XID 00c00000 IRQ 42
[    1.686940] SCSI subsystem initialized
[    1.688486] ACPI: bus type ATA registered
[    1.688550] libata version 3.00 loaded.
[    1.689336] rtsx_pci 0000:09:00.0: irq 43 for MSI/MSI-X
[    1.689376] rtsx_pci 0000:09:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
[    1.696571] [drm] Memory usable by graphics device = 2048M
[    1.696578] i915 0000:00:02.0: setting latency timer to 64
[    1.711967] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    1.711978] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.711980] [drm] Driver supports precise vblank timestamp query.
[    1.712110] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    1.712113] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    1.749537] fbcon: inteldrmfb (fb0) is primary device
[    1.980164] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    1.998899] usb 1-2: New USB device found, idVendor=046d, idProduct=c52f
[    1.998902] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.998903] usb 1-2: Product: USB Receiver
[    1.998905] usb 1-2: Manufacturer: Logitech
[    2.002480] hidraw: raw HID events driver (C) Jiri Kosina
[    2.004806] usbcore: registered new interface driver usbhid
[    2.004808] usbhid: USB HID core driver
[    2.006898] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input4
[    2.007028] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
[    2.007850] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input5
[    2.008016] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
[    2.536790] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    2.536797] Switching to clocksource tsc
[    2.555950] Console: switching to colour frame buffer device 170x48
[    2.562746] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.562749] i915 0000:00:02.0: registered panic notifier
[    2.562997] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    2.563985] ACPI Error: Too many duplicates in _BCL package (20130328/video-793)
[    2.565925] acpi device:05: registered as cooling_device0
[    2.566152] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    2.566242] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input6
[    2.567308] ACPI Error: Too many duplicates in _BCL package (20130328/video-793)
[    2.569225] acpi device:0e: registered as cooling_device1
[    2.569477] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.569534] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    2.569567] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.569760] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    2.569776] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.569788] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.569813] ehci-pci 0000:00:1a.0: debug port 2
[    2.573734] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.573760] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc3619000
[    2.584769] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.584813] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.584816] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.584818] usb usb3: Product: EHCI Host Controller
[    2.584820] usb usb3: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
[    2.584822] usb usb3: SerialNumber: 0000:00:1a.0
[    2.585021] hub 3-0:1.0: USB hub found
[    2.585028] hub 3-0:1.0: 2 ports detected
[    2.585260] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    2.585268] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.585275] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    2.585292] ehci-pci 0000:00:1d.0: debug port 2
[    2.589188] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.589208] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc3618000
[    2.600853] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.600892] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.600895] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.600898] usb usb4: Product: EHCI Host Controller
[    2.600900] usb usb4: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
[    2.600902] usb usb4: SerialNumber: 0000:00:1d.0
[    2.601147] hub 4-0:1.0: USB hub found
[    2.601155] hub 4-0:1.0: 2 ports detected
[    2.601340] ahci 0000:00:1f.2: version 3.0
[    2.601662] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    2.616912] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    2.616918] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    2.616925] ahci 0000:00:1f.2: setting latency timer to 64
[    2.625864] scsi0 : ahci
[    2.626068] scsi1 : ahci
[    2.626177] scsi2 : ahci
[    2.626301] scsi3 : ahci
[    2.626418] scsi4 : ahci
[    2.626540] scsi5 : ahci
[    2.626605] ata1: SATA max UDMA/133 abar m2048@0xc3617000 port 0xc3617100 irq 45
[    2.626607] ata2: DUMMY
[    2.626608] ata3: DUMMY
[    2.626609] ata4: DUMMY
[    2.626612] ata5: SATA max UDMA/133 abar m2048@0xc3617000 port 0xc3617300 irq 45
[    2.626614] ata6: DUMMY
[    2.845579] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    2.897167] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.945221] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.953235] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.954576] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA7A0, max UDMA/100
[    2.954581] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.956042] ata1.00: configured for UDMA/100
[    2.956350] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    2.960860] ata5.00: ATAPI: hp      DVD-RAM UJ8D1, H.01, max UDMA/100
[    2.974733] ata5.00: configured for UDMA/100
[    2.981245] scsi 4:0:0:0: CD-ROM            hp       DVD-RAM UJ8D1    H.01 PQ: 0 ANSI: 5
[    2.986774] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.986779] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.986878] sd 0:0:0:0: [sda] Write Protect is off
[    2.986881] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.986911] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.992029] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.992032] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.992183] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.994528] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.994594] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    3.029773] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    3.029779] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.030144] hub 3-1:1.0: USB hub found
[    3.030370] hub 3-1:1.0: 6 ports detected
[    3.141486] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    3.274050] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    3.274056] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.274466] hub 4-1:1.0: USB hub found
[    3.274628] hub 4-1:1.0: 6 ports detected
[    3.322595]  sda: sda1 sda2
[    3.323688] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.546051] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[    3.707471] usb 4-1.5: New USB device found, idVendor=05c8, idProduct=0348
[    3.707477] usb 4-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.707480] usb 4-1.5: Product: HP Truevision HD
[    3.707483] usb 4-1.5: Manufacturer: Generic
[    3.707486] usb 4-1.5: SerialNumber: 200901010001
[    4.013967] device-mapper: uevent: version 1.0.3
[    4.014016] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    4.126518] raid6: sse2x1    8039 MB/s
[    4.194595] raid6: sse2x2   10393 MB/s
[    4.262672] raid6: sse2x4   11798 MB/s
[    4.262674] raid6: using algorithm sse2x4 (11798 MB/s)
[    4.262675] raid6: using ssse3x2 recovery algorithm
[    4.262865] xor: automatically using best checksumming function:
[    4.302714]    avx       : 23852.000 MB/sec
[    4.304685] bio: create slab <bio-1> at 1
[    4.304789] Btrfs loaded
[    4.480270] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    9.706330] systemd-udevd[435]: starting version 204
[    9.914344] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    9.914347] Disabling lock debugging due to kernel taint
[    9.920699] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3703 MBytes.
[    9.920834] <6>[fglrx]   vendor: 1002 device: 6840 count: 1
[    9.920997] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100
[    9.921004] pci 0000:01:00.0: enabling device (0000 -> 0003)
[    9.921098] <6>[fglrx] Kernel PAT support is enabled
[    9.921114] <6>[fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
[    9.935902] ACPI: AC Adapter [ACAD] (off-line)
[    9.937185] ACPI: Requesting acpi_cpufreq
[    9.983813] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[    9.983819] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.985664] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   10.003253] ACPI: Battery Slot [BAT0] (battery present)
[   10.199315] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   10.199321] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.199324] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   10.199327] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130328/utaddress-251)
[   10.199330] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPIO 3 (20130328/utaddress-251)
[   10.199332] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.199333] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   10.199335] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130328/utaddress-251)
[   10.199338] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPIO 3 (20130328/utaddress-251)
[   10.199340] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.199341] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.275221] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19
[   10.330941] platform microcode: firmware: agent loaded intel-ucode/06-3a-09 into memory
[   10.330958] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x19
[   10.330970] platform microcode: firmware: agent loaded intel-ucode/06-3a-09 into memory
[   10.330979] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x19
[   10.330987] platform microcode: firmware: agent loaded intel-ucode/06-3a-09 into memory
[   10.330996] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19
[   10.331006] platform microcode: firmware: agent loaded intel-ucode/06-3a-09 into memory
[   10.331047] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.474001] mei_me 0000:00:16.0: setting latency timer to 64
[   10.474034] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[   10.493301] iTCO_vendor_support: vendor-support=0
[   10.497334] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   10.497358] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   10.497439] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.596035] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   10.657066] hp_accel: laptop model unknown, using default axes configuration
[   10.657113] input: HP WMI hotkeys as /devices/virtual/input/input9
[   10.670912] lis3lv02d: 8 bits 3DC sensor found
[   10.714096] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[   10.805148] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400, board id: 2068, fw id: 1028260
[   10.842311] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[   10.851872] cfg80211: Calling CRDA to update world regulatory domain
[   10.893411] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   10.992939] media: Linux media interface: v0.10
[   11.068782] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[   11.073200] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   11.101840] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[   11.251924] Linux video capture interface: v2.00
[   11.287678] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.289390] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.289452] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.289504] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   11.317109] lib80211: common routines for IEEE802.11 drivers
[   11.317113] lib80211_crypt: registered algorithm 'NULL'
[   11.357057] cfg80211: World regulatory domain updated:
[   11.357062] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.357065] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.357067] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.357069] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.357071] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.357073] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.357319] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:0348)
[   11.368971] input: HP Truevision HD as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input16
[   11.369065] usbcore: registered new interface driver uvcvideo
[   11.369066] USB Video Class driver (1.1.1)
[   13.090866] EXT4-fs (sda1): re-mounted. Opts: (null)
[   13.252361] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.768438] fuse init (API version 7.22)
[   14.757935] RPC: Registered named UNIX socket transport module.
[   14.757939] RPC: Registered udp transport module.
[   14.757940] RPC: Registered tcp transport module.
[   14.757942] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.779573] FS-Cache: Loaded
[   14.791901] Key type dns_resolver registered
[   14.811963] FS-Cache: Netfs 'nfs' registered for caching
[   14.872155] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   16.355433] Bluetooth: Core ver 2.16
[   16.355451] NET: Registered protocol family 31
[   16.355452] Bluetooth: HCI device and connection manager initialized
[   16.355675] Bluetooth: HCI socket layer initialized
[   16.355679] Bluetooth: L2CAP socket layer initialized
[   16.355685] Bluetooth: SCO socket layer initialized
[   16.357684] Bluetooth: RFCOMM TTY layer initialized
[   16.357696] Bluetooth: RFCOMM socket layer initialized
[   16.357698] Bluetooth: RFCOMM ver 1.11
[   16.359934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.359938] Bluetooth: BNEP filters: protocol multicast
[   16.359946] Bluetooth: BNEP socket layer initialized
[   17.036363] r8169 0000:08:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw into memory
[   17.191955] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[   17.220473] r8169 0000:08:00.0 eth0: link down
[   17.220489] r8169 0000:08:00.0 eth0: link down
[   17.220511] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.465627] lp: driver loaded but no devices found
[   17.467366] ppdev: user-space parallel port driver
[   18.732019] r8169 0000:08:00.0 eth0: link up
[   18.732031] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


root@danis:/home/yakup/Belgeler# dmesg | tail
[   16.359946] Bluetooth: BNEP socket layer initialized
[   17.036363] r8169 0000:08:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw into memory
[   17.191955] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[   17.220473] r8169 0000:08:00.0 eth0: link down
[   17.220489] r8169 0000:08:00.0 eth0: link down
[   17.220511] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.465627] lp: driver loaded but no devices found
[   17.467366] ppdev: user-space parallel port driver
[   18.732019] r8169 0000:08:00.0 eth0: link up
[   18.732031] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


burk

@danis olay Pardus üzerinde gerçekleşiyor olsa da aynı karta sahip biri şu yöntemle çözüm bulmuş, bunu bir deneyelim;
http://forum.ubuntu-tr.net/index.php?topic=37558.0

heartsmagic

@burk sanırım yanlış görmüş, kart Broadcom değil sanki :)

@danis, sorun şu an açıkça görülüyor, donanımsal olarak kapalı durumda kablosuz ağ. Bir şekilde açmalısın onu. Ayrıca, eğer açtıktan sonra sorun yaşarsan şu başlığı takip edersin:

http://forum.ubuntu-tr.net/index.php?topic=40893.msg484711#msg484711

Kartınız oradaki arkadaşla aynı çünkü. Bir ara başlığı da Diğer Dağıtımlar bölümüne taşırız.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

danis

Bios üzerinden donanımı açabildim sonunda.
sorun çözüldü. yardım için teşekkür ederim

burk

Çoklu sekme ve dar zamanda ileti yazmanın sonuçları :) Dikkatsizlik için kusura bakmayın. Ayrıca; cozuldukonusu