Yeni aldiğim anakartın özelliklerinden yararlanamıyorum!

[comet]

Merhaba. Gigabyte ga-990fxa-ud3 anakart aldım. 8cekirdek işlemci. dosta kopyalama hızım 60mb/sn. Eski anakartımda 4 cekirdek sata 2 olmasına rağmen 100mb/sn ile kopyalıyordum. yeni anakartta hızlı şarj var ama sürücü yüklemem gerekiyormuş. ubuntu için hiçbir sürücüsü yok anakartın:(  Olması gereken performansta kullanamadığımı düşünüyorum. Ne yapmam lazım??

[burk]

Bu kopyalama işlemi harici birimden mi yapılıyor? Şu an Ubuntu varken USB girişleri çalışıyor mu?
Ayrıca kullanılan Ubuntu sürümü nedir?

[comet]

Dahili Hdd.  arası 60mb/sn. usb den 30mb/sn. usbler çalışıyor ama hızlı şarj etmiyor bu özelliği olduğu halde. ubuntu 13.04 sanirim son sürümü. usb3.0 da kullanabildiğimi sanmıyorum. 2.0 çalışıyor muhtemelen.  Sabit disk sata3 ten solit sata3 e 80 ni ancak görüyorum. Ssd kendi içinde 60mb/sn. (corsair forge gt) Eski Anakartımda sata 3 desteği yokken 100mb/s ile atıyordu.

[meda]

Comet Bir hafta bekleyip Ubuntu'nun yeni sürümü olan 13.10 kurup deneyebilirsin.13.10 yeni çekirdekle geleceği için belki sürücü probleminde ortadan kalkar.

[heartsmagic]

Hızlı şarj nedir?
2009'dan bu yana USB 3.0 bizim tarafta desteklenmekte. USB 3.0 olduğuna emin olduğun bir yuvaya bir aygıt takıp şu çıktıyı buraya geç lütfen:

Kod Seç Genişlet

dmesg | tail -n 30

[comet]

Hızlı şarj. Cep telefonu usb porttan max : 2.5 saate şarj oluyor (s3 telefon SABERTOOTH 990FX anakart ubuntu ayni sürüm) test ettim. Gigabayt aynı özellikli su an kullandığım anakart 5 sate anca şarj ediyor. Hizli şarj özelliği bu anakarttada var. Gigabayt türkite dağıtıcısını aradım yazılımları kurmaniz gerekli bu özelliğin aktif olması için dedi. tabi ubuntu için yok malesef.

Usb3.0 test etme imkanım olmadı sadece ana kartın performans özelliklerini kullanamadığım için onuda kullanamadığımı düşünüyorum.

[heartsmagic]

USB3.0 için yazılımsal bir şeye gerek yok, ilk destekleyen muhtemelen Linux'tur kendisini.

[furkankalkan]

Hızlı şarj sistemlerinin mantığı normalden daha fazla akım vererek enerji depolama için gerekli tepkimeleri hızlandırmaktır. Fakat bu uzun vadede bataryaya ve telefona zarar verir. Çok gerekliyse overclock benzeri bir işlemle portun birini bu iş için tahsis edebilirsiniz. (Zaten muhtemelen sürücüsü de bunu yapıyordur.) Ya da o olmazsa gider bir elektronikçiye standart porttan hızlı şarj sistemiyle aynı akım değerinde akım veren bir regülatör yaptırırsınız. Bu tarz özellikler yaygınlaştıkça Linux çekirdeği tarafından elbette desteklenecektir, fakat şu an için bu zor olduğu için yapacağımız çok şey yok şimdilik.

[comet]

Telefonun kendi orjinal adaptörü 2.5 saate şarj ediyor. Bu anakartımdan önce Asus sabertooth vardı o da 2.5 saate şarj ediyordu. (tahminim linux sürücüleri desjlediği için) Gigabaayt ile 4.5-5 saate şarj ediyor.  Bu büyük bi sorun değil de dosya kopyalama hızım da çok düşük vs. Kafama takılan ubuntu anakartımı tam tanımadığı için olması gerekenden yavaş mı çalışıyordur. Aldığım anakart 450tl civarı. 150tl lik bir ana kart ile aynı performansta mı kullanıyorum. (Ubuntu ile) Evde 2 cekirdekli dandik bi ana kart var yaklaşık 200mb/s ile kopyalama yapıyorum. İş yerimde 8 çekirdek 990fx güzel bi ana kartla 80mb/s ile kopyalıyorum İnsanın canı sıkılıyor. 

[if]

@comet, anakart için sürücü yüklemek diye bir şey  yok. Ancak anakart üzerindeki aygıtların sürücülerini yükleyebilirsiniz ki bu aygıtların sürücüleri çekirdeğe gömülü gelir zaten.

Kod Seç Genişlet

sudo hdparm -I /dev/sda | grep -i speed ne diyor?

[comet]

Kod Seç Genişlet

Gen1 signaling speed (1.5Gb/s)
   * Gen2 signaling speed (3.0Gb/s)
   * Gen3 signaling speed (6.0Gb/s)


[comet]

Kod Seç Genişlet

sudo hdparm -Tt /dev/sda
/dev/sda:
Timing cached reads:   9392 MB in  2.00 seconds = 4703.92 MB/sec
Timing buffered disk reads: 760 MB in  3.01 seconds = 252.87 MB/sec

550MB/sec civarı olması gerkiyor.

normal disktes ssd ye kopyalarken 80mb/s ile atiyor.
ssd den normal diske atarken 180mb/s ile atiyot.

[if]

@comet, sata kablolarını kontrol edin. Diskleri doğru porta taktığınızdan emin olun. BIOS'tan SATA 2 özelliğinin açık olduğuna emin olun.

[comet]

SSD ye giden kabloyu değiştirdim. Anakart, SSD ve Normak HDD Hepsi sata3 destekli. Biosta sata1-2-3-4- portlarda AHCI aktif. Sata 5-6 IDE modda. Hddlerim Ahci aktif olan portlarda takılı. Denemek için değişik portlarada taktım. ssd Ahci modda ext4 format attım. 6 sata portunun hepsi sata3 destekli. 

[if]

@comet, daha önce hangi işletim sistemini kullanıyordunuz? SSD için TRIM özelliği açık mıydı?

Kod Seç Genişlet

sudo hdparm -I /dev/sda |grep TRIM

Biraz yazma çizme işlemi yapın disk üzerinde, sonra

Kod Seç Genişlet

dmesg
sudo smartctl --all /dev/sda çıktısı ile buraya geçin.

[comet]

Daha öncede ubuntu kullanıyordum. Trim açıktı.

Kod Seç Genişlet

sudo hdparm -I /dev/sda |grep TRIM
[sudo] password for asd:
   * Data Set Management TRIM supported (limit 1 block)
   * Deterministic read data after TRIM


Kod Seç Genişlet

[    7.331791] hub 8-0:1.0: 5 ports detected
[    7.332160] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    7.332167] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[    7.332183] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[    7.332935] sr 6:0:1:0: [sr0] 
[    7.332938] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.332940] sr 6:0:1:0: [sr0] 
[    7.332942] Sense Key : Illegal Request [current]
[    7.332945] sr 6:0:1:0: [sr0] 
[    7.332947] Add. Sense: Logical block address out of range
[    7.332949] sr 6:0:1:0: [sr0] CDB:
[    7.332950] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.332957] end_request: I/O error, dev sr0, sector 0
[    7.332960] Buffer I/O error on device sr0, logical block 0
[    7.335662] sr 6:0:1:0: [sr0] 
[    7.335664] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.335666] sr 6:0:1:0: [sr0] 
[    7.335667] Sense Key : Illegal Request [current]
[    7.335670] sr 6:0:1:0: [sr0] 
[    7.335672] Add. Sense: Logical block address out of range
[    7.335674] sr 6:0:1:0: [sr0] CDB:
[    7.335675] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.335682] end_request: I/O error, dev sr0, sector 0
[    7.336098] kvm: Nested Virtualization enabled
[    7.336114] kvm: Nested Paging enabled
[    7.337630] sr 6:0:1:0: [sr0] 
[    7.337632] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.337635] sr 6:0:1:0: [sr0] 
[    7.337636] Sense Key : Illegal Request [current]
[    7.337639] sr 6:0:1:0: [sr0] 
[    7.337641] Add. Sense: Logical block address out of range
[    7.337643] sr 6:0:1:0: [sr0] CDB:
[    7.337644] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.337650] end_request: I/O error, dev sr0, sector 0
[    7.339369] sr 6:0:1:0: [sr0] 
[    7.339372] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.339374] sr 6:0:1:0: [sr0] 
[    7.339375] Sense Key : Illegal Request [current]
[    7.339378] sr 6:0:1:0: [sr0] 
[    7.339380] Add. Sense: Logical block address out of range
[    7.339382] sr 6:0:1:0: [sr0] CDB:
[    7.339383] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.339389] end_request: I/O error, dev sr0, sector 0
[    7.340652] sr 6:0:1:0: [sr0] 
[    7.340654] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.340656] sr 6:0:1:0: [sr0] 
[    7.340658] Sense Key : Illegal Request [current]
[    7.340661] sr 6:0:1:0: [sr0] 
[    7.340662] Add. Sense: Logical block address out of range
[    7.340665] sr 6:0:1:0: [sr0] CDB:
[    7.340666] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.340672] end_request: I/O error, dev sr0, sector 0
[    7.342319] sr 6:0:1:0: [sr0] 
[    7.342321] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.342323] sr 6:0:1:0: [sr0] 
[    7.342325] Sense Key : Illegal Request [current]
[    7.342327] sr 6:0:1:0: [sr0] 
[    7.342329] Add. Sense: Logical block address out of range
[    7.342331] sr 6:0:1:0: [sr0] CDB:
[    7.342332] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.342339] end_request: I/O error, dev sr0, sector 0
[    7.343991] sr 6:0:1:0: [sr0] 
[    7.343994] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.343997] sr 6:0:1:0: [sr0] 
[    7.343998] Sense Key : Illegal Request [current]
[    7.344001] sr 6:0:1:0: [sr0] 
[    7.344004] Add. Sense: Logical block address out of range
[    7.344006] sr 6:0:1:0: [sr0] CDB:
[    7.344007] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.344014] end_request: I/O error, dev sr0, sector 0
[    7.346184] sr 6:0:1:0: [sr0] 
[    7.346187] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.346189] sr 6:0:1:0: [sr0] 
[    7.346191] Sense Key : Illegal Request [current]
[    7.346194] sr 6:0:1:0: [sr0] 
[    7.346196] Add. Sense: Logical block address out of range
[    7.346198] sr 6:0:1:0: [sr0] CDB:
[    7.346199] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.348072] sr 6:0:1:0: [sr0] 
[    7.348075] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.348077] sr 6:0:1:0: [sr0] 
[    7.348078] Sense Key : Illegal Request [current]
[    7.348081] sr 6:0:1:0: [sr0] 
[    7.348083] Add. Sense: Logical block address out of range
[    7.348085] sr 6:0:1:0: [sr0] CDB:
[    7.348086] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.349988] sr 6:0:1:0: [sr0] 
[    7.349990] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.349992] sr 6:0:1:0: [sr0] 
[    7.349993] Sense Key : Illegal Request [current]
[    7.349996] sr 6:0:1:0: [sr0] 
[    7.349997] Add. Sense: Logical block address out of range
[    7.349999] sr 6:0:1:0: [sr0] CDB:
[    7.350000] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.351272] sr 6:0:1:0: [sr0] 
[    7.351275] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.351277] sr 6:0:1:0: [sr0] 
[    7.351279] Sense Key : Illegal Request [current]
[    7.351282] sr 6:0:1:0: [sr0] 
[    7.351284] Add. Sense: Logical block address out of range
[    7.351286] sr 6:0:1:0: [sr0] CDB:
[    7.351287] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.352572] sr 6:0:1:0: [sr0] 
[    7.352575] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.352578] sr 6:0:1:0: [sr0] 
[    7.352580] Sense Key : Illegal Request [current]
[    7.352584] sr 6:0:1:0: [sr0] 
[    7.352587] Add. Sense: Logical block address out of range
[    7.352590] sr 6:0:1:0: [sr0] CDB:
[    7.352592] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.375454] sr 6:0:1:0: [sr0] 
[    7.375457] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.375459] sr 6:0:1:0: [sr0] 
[    7.375461] Sense Key : Illegal Request [current]
[    7.375464] sr 6:0:1:0: [sr0] 
[    7.375466] Add. Sense: Logical block address out of range
[    7.375468] sr 6:0:1:0: [sr0] CDB:
[    7.375469] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.376778] sr 6:0:1:0: [sr0] 
[    7.376780] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.376781] sr 6:0:1:0: [sr0] 
[    7.376783] Sense Key : Illegal Request [current]
[    7.376785] sr 6:0:1:0: [sr0] 
[    7.376787] Add. Sense: Logical block address out of range
[    7.376788] sr 6:0:1:0: [sr0] CDB:
[    7.376789] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.382817] sr 6:0:1:0: [sr0] 
[    7.382821] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.382824] sr 6:0:1:0: [sr0] 
[    7.382826] Sense Key : Illegal Request [current]
[    7.382829] sr 6:0:1:0: [sr0] 
[    7.382832] Add. Sense: Logical block address out of range
[    7.382835] sr 6:0:1:0: [sr0] CDB:
[    7.382837] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.384113] [drm] radeon kernel modesetting enabled.
[    7.384135] sr 6:0:1:0: [sr0] 
[    7.384138] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.384140] sr 6:0:1:0: [sr0] 
[    7.384141] Sense Key : Illegal Request [current]
[    7.384144] sr 6:0:1:0: [sr0] 
[    7.384145] Add. Sense: Logical block address out of range
[    7.384147] sr 6:0:1:0: [sr0] CDB:
[    7.384148] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.384352] [drm] initializing kernel modesetting (RV515 0x1002:0x7142 0x1787:0x3000).
[    7.384370] [drm] register mmio base: 0xFEA30000
[    7.384372] [drm] register mmio size: 65536
[    7.384435] ATOM BIOS: RADEON
[    7.384445] [drm] Generation 2 PCI interface, using max accessible memory
[    7.384449] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    7.384452] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[    7.384461] [drm] Detected VRAM RAM=512M, BAR=256M
[    7.384462] [drm] RAM width 128bits DDR
[    7.384512] [TTM] Zone  kernel: Available graphics memory: 404508 kiB
[    7.384515] [TTM] Zone highmem: Available graphics memory: 4122192 kiB
[    7.384516] [TTM] Initializing pool allocator
[    7.384521] [TTM] Initializing DMA pool allocator
[    7.384536] [drm] radeon: 512M of VRAM memory ready
[    7.384537] [drm] radeon: 512M of GTT memory ready.
[    7.384550] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    7.385671] sr 6:0:1:0: [sr0] 
[    7.385674] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.385676] sr 6:0:1:0: [sr0] 
[    7.385677] Sense Key : Illegal Request [current]
[    7.385680] sr 6:0:1:0: [sr0] 
[    7.385682] Add. Sense: Logical block address out of range
[    7.385685] sr 6:0:1:0: [sr0] CDB:
[    7.385686] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.387059] sr 6:0:1:0: [sr0] 
[    7.387061] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.387063] sr 6:0:1:0: [sr0] 
[    7.387064] Sense Key : Illegal Request [current]
[    7.387067] sr 6:0:1:0: [sr0] 
[    7.387069] Add. Sense: Logical block address out of range
[    7.387071] sr 6:0:1:0: [sr0] CDB:
[    7.387072] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.388439] sr 6:0:1:0: [sr0] 
[    7.388441] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.388442] sr 6:0:1:0: [sr0] 
[    7.388444] Sense Key : Illegal Request [current]
[    7.388446] sr 6:0:1:0: [sr0] 
[    7.388448] Add. Sense: Logical block address out of range
[    7.388450] sr 6:0:1:0: [sr0] CDB:
[    7.388451] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.389947] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    7.389949] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.389952] usb usb9: Product: OHCI PCI host controller
[    7.389954] usb usb9: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[    7.389955] usb usb9: SerialNumber: 0000:00:13.0
[    7.390068] hub 9-0:1.0: USB hub found
[    7.390075] hub 9-0:1.0: 5 ports detected
[    7.390202] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    7.393835] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    7.394186] sp5100_tco: PCI Revision ID: 0x42
[    7.394230] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    7.394244] sp5100_tco: Last reboot was not triggered by watchdog.
[    7.394462] sp5100_tco: initialized (0xf8482b00). heartbeat=60 sec (nowayout=0)
[    7.394479] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    7.394505] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[    7.394526] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[    7.402756] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    7.403756] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    7.403768] sr 6:0:1:0: [sr0] 
[    7.403771] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.403774] radeon 0000:01:00.0: WB enabled
[    7.403775] sr 6:0:1:0: [sr0] 
[    7.403779] Sense Key : Illegal Request [current]
[    7.403781] sr 6:0:1:0: [sr0] 
[    7.403782] Add. Sense: Logical block address out of range
[    7.403785] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000000 and cpu addr 0xffd45000
[    7.403787] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.403788] [drm] Driver supports precise vblank timestamp query.
[    7.403790] sr 6:0:1:0: [sr0] CDB:
[    7.403791] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.403803] [drm] radeon: irq initialized.
[    7.403813] [drm] Loading R500 Microcode
[    7.405071] sr 6:0:1:0: [sr0] 
[    7.405074] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.405076] sr 6:0:1:0: [sr0] 
[    7.405077] Sense Key : Illegal Request [current]
[    7.405081] sr 6:0:1:0: [sr0] 
[    7.405083] Add. Sense: Logical block address out of range
[    7.405085] sr 6:0:1:0: [sr0] CDB:
[    7.405086] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.405178] [drm] radeon: ring at 0x0000000020001000
[    7.405206] [drm] ring test succeeded in 7 usecs
[    7.405305] [drm] ib test succeeded in 0 usecs
[    7.405594] [drm] Radeon Display Connectors
[    7.405596] [drm] Connector 0:
[    7.405598] [drm]   DVI-I-1
[    7.405599] [drm]   HPD1
[    7.405601] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    7.405603] [drm]   Encoders:
[    7.405604] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    7.405605] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[    7.405607] [drm] Connector 1:
[    7.405608] [drm]   SVIDEO-1
[    7.405609] [drm]   Encoders:
[    7.405611] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    7.405612] [drm] Connector 2:
[    7.405613] [drm]   DVI-I-2
[    7.405614] [drm]   HPD2
[    7.405616] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    7.405617] [drm]   Encoders:
[    7.405618] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    7.405620] [drm]     DFP3: INTERNAL_LVTM1
[    7.405629] [drm] Possible lm63 thermal controller at 0x4c
[    7.406600] sr 6:0:1:0: [sr0] 
[    7.406602] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.406604] sr 6:0:1:0: [sr0] 
[    7.406606] Sense Key : Illegal Request [current]
[    7.406608] sr 6:0:1:0: [sr0] 
[    7.406610] Add. Sense: Logical block address out of range
[    7.406612] sr 6:0:1:0: [sr0] CDB:
[    7.406613] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.407944] sr 6:0:1:0: [sr0] 
[    7.407946] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.407948] sr 6:0:1:0: [sr0] 
[    7.407950] Sense Key : Illegal Request [current]
[    7.407953] sr 6:0:1:0: [sr0] 
[    7.407955] Add. Sense: Logical block address out of range
[    7.407957] sr 6:0:1:0: [sr0] CDB:
[    7.407958] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.409262] sr 6:0:1:0: [sr0] 
[    7.409265] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.409267] sr 6:0:1:0: [sr0] 
[    7.409269] Sense Key : Illegal Request [current]
[    7.409272] sr 6:0:1:0: [sr0] 
[    7.409274] Add. Sense: Logical block address out of range
[    7.409276] sr 6:0:1:0: [sr0] CDB:
[    7.409279] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.410577] sr 6:0:1:0: [sr0] 
[    7.410579] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.410581] sr 6:0:1:0: [sr0] 
[    7.410583] Sense Key : Illegal Request [current]
[    7.410586] sr 6:0:1:0: [sr0] 
[    7.410588] Add. Sense: Logical block address out of range
[    7.410590] sr 6:0:1:0: [sr0] CDB:
[    7.410591] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.411877] sr 6:0:1:0: [sr0] 
[    7.411879] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.411882] sr 6:0:1:0: [sr0] 
[    7.411883] Sense Key : Illegal Request [current]
[    7.411886] sr 6:0:1:0: [sr0] 
[    7.411888] Add. Sense: Logical block address out of range
[    7.411890] sr 6:0:1:0: [sr0] CDB:
[    7.411891] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.413197] sr 6:0:1:0: [sr0] 
[    7.413199] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.413201] sr 6:0:1:0: [sr0] 
[    7.413202] Sense Key : Illegal Request [current]
[    7.413205] sr 6:0:1:0: [sr0] 
[    7.413207] Add. Sense: Logical block address out of range
[    7.413209] sr 6:0:1:0: [sr0] CDB:
[    7.413210] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.414481] sr 6:0:1:0: [sr0] 
[    7.414484] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.414487] sr 6:0:1:0: [sr0] 
[    7.414489] Sense Key : Illegal Request [current]
[    7.414492] sr 6:0:1:0: [sr0] 
[    7.414494] Add. Sense: Logical block address out of range
[    7.414496] sr 6:0:1:0: [sr0] CDB:
[    7.414498] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.438616] sr 6:0:1:0: [sr0] 
[    7.438620] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.438622] sr 6:0:1:0: [sr0] 
[    7.438626] Sense Key : Illegal Request [current]
[    7.438628] sr 6:0:1:0: [sr0] 
[    7.438630] Add. Sense: Logical block address out of range
[    7.438632] sr 6:0:1:0: [sr0] CDB:
[    7.438633] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.439937] sr 6:0:1:0: [sr0] 
[    7.439940] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.439942] sr 6:0:1:0: [sr0] 
[    7.439943] Sense Key : Illegal Request [current]
[    7.439945] sr 6:0:1:0: [sr0] 
[    7.439947] Add. Sense: Logical block address out of range
[    7.439948] sr 6:0:1:0: [sr0] CDB:
[    7.439949] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.441266] sr 6:0:1:0: [sr0] 
[    7.441268] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.441270] sr 6:0:1:0: [sr0] 
[    7.441271] Sense Key : Illegal Request [current]
[    7.441273] sr 6:0:1:0: [sr0] 
[    7.441275] Add. Sense: Logical block address out of range
[    7.441277] sr 6:0:1:0: [sr0] CDB:
[    7.441278] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.442547] sr 6:0:1:0: [sr0] 
[    7.442549] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.442550] sr 6:0:1:0: [sr0] 
[    7.442551] Sense Key : Illegal Request [current]
[    7.442553] sr 6:0:1:0: [sr0] 
[    7.442555] Add. Sense: Logical block address out of range
[    7.442557] sr 6:0:1:0: [sr0] CDB:
[    7.442557] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.443917] sr 6:0:1:0: [sr0] 
[    7.443920] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.443922] sr 6:0:1:0: [sr0] 
[    7.443924] Sense Key : Illegal Request [current]
[    7.443927] sr 6:0:1:0: [sr0] 
[    7.443930] Add. Sense: Logical block address out of range
[    7.443932] sr 6:0:1:0: [sr0] CDB:
[    7.443934] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.445208] sr 6:0:1:0: [sr0] 
[    7.445215] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.445221] sr 6:0:1:0: [sr0] 
[    7.445224] Sense Key : Illegal Request [current]
[    7.445227] sr 6:0:1:0: [sr0] 
[    7.445234] Add. Sense: Logical block address out of range
[    7.445236] sr 6:0:1:0: [sr0] CDB:
[    7.445238] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.446573] sr 6:0:1:0: [sr0] 
[    7.446575] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.446576] sr 6:0:1:0: [sr0] 
[    7.446577] Sense Key : Illegal Request [current]
[    7.446579] sr 6:0:1:0: [sr0] 
[    7.446581] Add. Sense: Logical block address out of range
[    7.446582] sr 6:0:1:0: [sr0] CDB:
[    7.446583] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.447988] sr 6:0:1:0: [sr0] 
[    7.447994] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.448001] sr 6:0:1:0: [sr0] 
[    7.448005] Sense Key : Illegal Request [current]
[    7.448015] sr 6:0:1:0: [sr0] 
[    7.448023] Add. Sense: Logical block address out of range
[    7.448031] sr 6:0:1:0: [sr0] CDB:
[    7.448035] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.449469] sr 6:0:1:0: [sr0] 
[    7.449472] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.449474] sr 6:0:1:0: [sr0] 
[    7.449476] Sense Key : Illegal Request [current]
[    7.449478] sr 6:0:1:0: [sr0] 
[    7.449480] Add. Sense: Logical block address out of range
[    7.449482] sr 6:0:1:0: [sr0] CDB:
[    7.449483] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.450789] sr 6:0:1:0: [sr0] 
[    7.450791] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.450793] sr 6:0:1:0: [sr0] 
[    7.450794] Sense Key : Illegal Request [current]
[    7.450797] sr 6:0:1:0: [sr0] 
[    7.450798] Add. Sense: Logical block address out of range
[    7.450800] sr 6:0:1:0: [sr0] CDB:
[    7.450801] Read(10): 28 00 00 00 00 00 00 00 01 00
[    7.453853] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    7.453856] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.453858] usb usb10: Product: OHCI PCI host controller
[    7.453859] usb usb10: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[    7.453861] usb usb10: SerialNumber: 0000:00:14.5
[    7.454068] hub 10-0:1.0: USB hub found
[    7.454074] hub 10-0:1.0: 2 ports detected
[    7.454240] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    7.454245] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[    7.454258] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[    7.513057] [drm] fb mappable at 0xC00C0000
[    7.513061] [drm] vram apper at 0xC0000000
[    7.513062] [drm] size 5242880
[    7.513064] [drm] fb depth is 24
[    7.513065] [drm]    pitch is 5120
[    7.513139] fbcon: radeondrmfb (fb0) is primary device
[    7.513822] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[    7.513824] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.513825] usb usb11: Product: OHCI PCI host controller
[    7.513826] usb usb11: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[    7.513827] usb usb11: SerialNumber: 0000:00:16.0
[    7.513925] hub 11-0:1.0: USB hub found
[    7.513931] hub 11-0:1.0: 4 ports detected
[    7.514116] hda-intel 0000:00:14.2: Using LPIB position fix
[    7.517482] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[    7.527326] SKU: Nid=0x1d sku_cfg=0x4005e601
[    7.527327] SKU: port_connectivity=0x1
[    7.527327] SKU: enable_pcbeep=0x0
[    7.527327] SKU: check_sum=0x00000005
[    7.527328] SKU: customization=0x000000e6
[    7.527328] SKU: external_amp=0x0
[    7.527328] SKU: platform_type=0x0
[    7.527329] SKU: swap=0x0
[    7.527329] SKU: override=0x1
[    7.527745] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    7.527745]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.527746]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.527746]    mono: mono_out=0x0
[    7.527747]    dig-out=0x11/0x1e
[    7.527747]    inputs:
[    7.527748]      Front Mic=0x19
[    7.527749]      Rear Mic=0x18
[    7.527749]      Line=0x1a
[    7.527750] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[    7.527751] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[    7.530124] Console: switching to colour frame buffer device 160x64
[    7.534283] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    7.534285] radeon 0000:01:00.0: registered panic notifier
[    7.534289] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[    7.537148] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    7.543409] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[    7.543484] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[    7.543550] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    7.543709] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    7.543887] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    7.543964] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    7.544025] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    7.544090] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    7.665768] usb 8-1: new full-speed USB device number 2 using ohci-pci
[    7.785993] init: failsafe main process (636) killed by TERM signal
[    7.838416] usb 8-1: New USB device found, idVendor=046d, idProduct=c049
[    7.838421] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.838424] usb 8-1: Product: USB Gaming Mouse
[    7.838426] usb 8-1: Manufacturer: Logitech
[    7.928813] hidraw: raw HID events driver (C) Jiri Kosina
[    7.951199] usbcore: registered new interface driver usbhid
[    7.951203] usbhid: USB HID core driver
[    7.954887] Bluetooth: Core ver 2.16
[    7.954901] NET: Registered protocol family 31
[    7.954903] Bluetooth: HCI device and connection manager initialized
[    7.954909] Bluetooth: HCI socket layer initialized
[    7.954911] Bluetooth: L2CAP socket layer initialized
[    7.954917] Bluetooth: SCO socket layer initialized
[    7.956658] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/input/input11
[    7.958818] hid-generic 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:12.0-1/input0
[    7.960985] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.960988] Bluetooth: BNEP filters: protocol multicast
[    7.960994] Bluetooth: BNEP socket layer initialized
[    7.963284] Bluetooth: RFCOMM TTY layer initialized
[    7.963292] Bluetooth: RFCOMM socket layer initialized
[    7.963294] Bluetooth: RFCOMM ver 1.11
[    7.963416] hid-generic 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:12.0-1/input1
[    7.987017] ppdev: user-space parallel port driver
[    7.987591] init: avahi-cups-reload main process (736) terminated with status 1
[    8.107492] r8169 0000:05:00.0 eth0: link down
[    8.107513] r8169 0000:05:00.0 eth0: link down
[    8.107546] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.107779] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.681532] r8169 0000:05:00.0 eth0: link up
[    9.681540] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.615219] systemd-hostnamed[2270]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[   28.263172] EXT4-fs (sdb): warning: mounting fs with errors, running e2fsck is recommended
[   28.264166] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
[   36.071788] WARNING! power/level is deprecated; use power/control instead
[   36.078944] usblp 3-2:1.1: usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5D11
[   36.078981] usbcore: registered new interface driver usblp


[if]

@comet, komut çıktılarını kod etiketi içinde aktarın.

Kod Seç Genişlet

EXT4-fs (sdb): warning: mounting fs with errors, running e2fsck is recommended

/dev/sdb üzerindeki bölümler bağlı ise ayırın, sonra

Kod Seç Genişlet

sudo e2fsck /dev/sdbN -C0 komutunu uygulayın. N, /dev/sdb üzerindeki bölümlerin numarasına işaret eder.

CD/DVD okuyucunda da bir sorun var.

Kod Seç Genişlet

lspci -v
sudo smartctl -a /dev/sda çıktısını da geçin.

[comet]

"/dev/sdb üzerindeki bölümler bağlı ise ayırın"
sdb 1tb tek bölüm.

Kod Seç Genişlet

sudo e2fsck /dev/sdb -C0
e2fsck 1.42.8 (20-Jun-2013)
1tb hatalı bir dosya sistemi içeriyor, denetim başlatılacak.
1. geçiş: düğümler, bloklar ve uzunluklar denetleniyor
Geçiş 2: Dizin yapısı denetleniyor                                             
Geçiş 3: Dizin bağlanabilirliği denetleniyor                                   
Geçiş 4: Başvuru sayısı denetleniyor
5. Geçiş: grup özet bilgileri denetleniyor                                     
1tb: 72361/61054976 files (0.4% non-contiguous), 230836207/244190646 blocks

Kod Seç Genişlet

lspci -v
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B)
Flags: fast devsel
Capabilities: <access denied>

00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe8fffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device b002
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f070 [size=8]
I/O ports at f060 [size=4]
I/O ports at f050 [size=16]
Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at feb09000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at feb07000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
Flags: 66MHz, medium devsel
Kernel driver in use: piix4_smbus

00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: Gigabyte Technology Co., Ltd Device 5002
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at f000 [size=16]
Kernel driver in use: pata_atiixp

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Gigabyte Technology Co., Ltd Device a132
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64

00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: fe700000-fe7fffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci

00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at feb04000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
Flags: fast devsel
Capabilities: <access denied>
Kernel driver in use: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
Flags: fast devsel
Kernel driver in use: fam15h_power

00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
Flags: fast devsel

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device 3000
Flags: bus master, fast devsel, latency 0, IRQ 24
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at fea30000 (64-bit, non-prefetchable) [size=64K]
I/O ports at e000 [size=256]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon

01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV515 PRO [Radeon X1300/X1550 Series] (Secondary)
Subsystem: Hightech Information System Ltd. Device 3001
Flags: bus master, fast devsel, latency 0
Memory at fea20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5007
Flags: bus master, fast devsel, latency 0, IRQ 72
Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd

03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device b000
Flags: bus master, fast devsel, latency 0, IRQ 74
I/O ports at d040 [size=8]
I/O ports at d030 [size=4]
I/O ports at d020 [size=8]
I/O ports at d010 [size=4]
I/O ports at d000 [size=16]
Memory at fe810000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at fe800000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 75
I/O ports at c000 [size=256]
Memory at d0004000 (64-bit, prefetchable) [size=4K]
Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169

06:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5007
Flags: bus master, fast devsel, latency 0, IRQ 73
Memory at fe700000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd


Bende biraz ugrastım. SSd de takas alanı vardı onu kaldırdım. ssd de gerek yok muş takas alanına.

Kod Seç Genişlet

sudo hdparm -Tt /dev/sda

/dev/sda:
Timing cached reads:   9530 MB in  2.00 seconds = 4772.74 MB/sec
Timing buffered disk reads: 806 MB in  3.00 seconds = 268.62 MB/sec

sudo hdparm -Tt /dev/sda1
/dev/sda1:
Timing cached reads:   9420 MB in  2.00 seconds = 4717.06 MB/sec
Timing buffered disk reads: 1028 MB in  3.00 seconds = 342.18 MB/sec


[if]

İki tane SATA sürücü var. AMD olanı kapatma imkânınız var mı?

[comet]

Güney Köprüsü:
6 x SATA 6Gb/s bağlantı noktası (SATA3_0~SATA3_5), 6 adet SATA 6Gb/s sürücüsünün bağlanmasına olanak sağlar
SATA RAID 0, RAID 1, RAID 5, RAID 10 ve JBOD desteği

Marvell 88SE9172 chip:
2 x eSATA 6Gb/s connectors on the back panel supporting up to 2 SATA 6Gb/s devices
Support for RAID 0, RAID 1, and JBOD

Bu ikisinimi kasdediyorsunuz. Marvelle sadece esatalar bağlı. onuda kullanmıyorum.
Güney Köprüsü: AMD SB950 chipset. biostan kapatabilirim e sataları sanırım.

[if]

Deneyelim kapatmayı.

[comet]

Biostan Esataların bağlı olan marvall yongasını kapattım. Hızda bir değişiklik olmadı. Amd yongasını kapatamıyorum çünki hdd ler o yongaya bağlı.

Kod Seç Genişlet

/dev/sda:
Timing cached reads:   9260 MB in  2.00 seconds = 4637.69 MB/sec
Timing buffered disk reads: 768 MB in  3.00 seconds = 255.78 MB/sec

/dev/sda1:
Timing cached reads:   9100 MB in  2.00 seconds = 4557.39 MB/sec
Timing buffered disk reads: 1008 MB in  3.00 seconds = 335.45 MB/sec


[if]

Son olarak

Kod Seç Genişlet

sudo smartctl -a /dev/sda çıktısına bakayım.

[comet]

Kod Seç Genişlet

sudo smartctl -a /dev/sda
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.11.0-12-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     Corsair Force GT
Serial Number:    11466504000010710908
LU WWN Device Id: 0 000000 000000000
Firmware Version: 1.3.3
User Capacity:    60.021.399.040 bytes [60,0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Nov  5 17:40:30 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (   1) minutes.
Extended self-test routine
recommended polling time: (  48) minutes.
Conveyance self-test routine
recommended polling time: (   2) minutes.
SCT capabilities:        (0x0021) SCT Status supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   090   090   050    Pre-fail  Always       -       0/10808981
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   096   096   000    Old_age   Always       -       4068h+20m+44.710s
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1473
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       245
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       1
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   031   054   000    Old_age   Always       -       31 (Min/Max 8/54)
195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/10808981
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
201 Unc_Soft_Read_Err_Rate  0x001c   120   120   000    Old_age   Offline      -       0/10808981
204 Soft_ECC_Correct_Rate   0x001c   120   120   000    Old_age   Offline      -       0/10808981
230 Life_Curve_Status       0x0013   100   100   000    Pre-fail  Always       -       100
231 SSD_Life_Left           0x0013   100   100   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       3194
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       3878
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       3878
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       5029

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


[if]

@comet, maalesef sorunun kaynağını bulamadım. Şuan aklıma gelen tek öneri üst sürüm bir çekirdek yüklemeniz olacak.