[Çözüldü]Debian 6 Kablosuz Bağlantı Sorunu

[hadon]

Merhaba.

Dizüstü bilgisayarımda İnternet'e kablosuz bağlanamadığımı fark ettim. Forumda arama yapıp yaklaşık 10 sayfa okudum ama sorunumu çözecek bir başlık bulamadım.

Bir başlıkta İnternet ve ağ sorunlarını açmadan önce bazı çıktıları istiyordu. O çıktılardan alabildiklerim şunlar:

Kod Seç Genişlet

hadon@dizdebian:~$ uname -a
Linux dizdebian 2.6.32-5-686 #1 SMP Fri May 10 08:33:48 UTC 2013 i686 GNU/Linux
hadon@dizdebian:~$

Kod Seç Genişlet

hadon@dizdebian:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce Go 6200/6400] (rev a1)
02:02.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:02.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:02.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
02:02.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
02:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
hadon@dizdebian:~$

Kod Seç Genişlet

hadon@dizdebian:~$ iwconfig
bash: iwconfig: komut yok
hadon@dizdebian:~$ su
Parola:
root@dizdebian:/home/hadon# iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.
pan0      no wireless extensions.
root@dizdebian:/home/hadon#

Kod Seç Genişlet

hadon@dizdebian:~$ lsmod
Module                  Size  Used by
acpi_cpufreq            4955  0
cpufreq_conservative     4018  0
cpufreq_stats           1997  0
cpufreq_userspace       1488  0
cpufreq_powersave        602  0
parport_pc             15799  0
ppdev                   4058  0
lp                      5570  0
parport                22554  3 parport_pc,ppdev,lp
sco                     5885  2
bridge                 33063  0
stp                      996  1 bridge
bnep                    7468  2
l2cap                  21745  3 bnep
crc16                   1027  1 l2cap
bluetooth              36347  5 sco,bnep,l2cap
rfkill                 10280  3 bluetooth
binfmt_misc             4907  1
uinput                  4796  1
fuse                   44376  1
loop                    9777  0
firewire_sbp2           9663  0
snd_hda_codec_si3054     2410  1
snd_hda_codec_realtek   163390  1
snd_hda_intel          16663  1
snd_hda_codec          46066  3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
pcmcia                 16194  0
snd_hwdep               4054  1 snd_hda_codec
snd_pcm                47226  3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
snd_seq                35495  0
snd_timer              12270  2 snd_pcm,snd_seq
snd_seq_device          3673  1 snd_seq
yenta_socket           16403  1
snd                    34431  11 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rsrc_nonstatic          7057  1 yenta_socket
soundcore               3450  1 snd
pcmcia_core            20458  3 pcmcia,yenta_socket,rsrc_nonstatic
snd_page_alloc          5061  2 snd_hda_intel,snd_pcm
rng_core                2178  0
tifm_7xx1               3014  0
ipw2200               108392  0
tifm_core               3268  1 tifm_7xx1
joydev                  6739  0
i2c_i801                6462  0
libipw                 18447  1 ipw2200
lib80211                2878  2 ipw2200,libipw
nouveau               314968  2
ttm                    33450  1 nouveau
video                  14605  0
psmouse                44845  0
drm_kms_helper         18577  1 nouveau
output                  1204  1 video
ac                      1636  0
battery                 3782  0
drm                   112669  4 nouveau,ttm,drm_kms_helper
i2c_algo_bit            3493  1 nouveau
i2c_core               12795  5 i2c_i801,nouveau,drm_kms_helper,drm,i2c_algo_bit
pcspkr                  1207  0
button                  3598  1 nouveau
evdev                   5609  18
processor              26343  2 acpi_cpufreq
serio_raw               2916  0
ext3                   94536  1
jbd                    32449  1 ext3
mbcache                 3762  1 ext3
usbhid                 28048  0
hid                    50925  1 usbhid
sg                     19945  0
sr_mod                 10770  0
cdrom                  26435  1 sr_mod
sd_mod                 26029  3
crc_t10dif              1012  1 sd_mod
ata_generic             2247  0
ata_piix               17744  2
ahci                   27814  0
sdhci_pci               4589  0
sdhci                  12187  1 sdhci_pci
uhci_hcd               16073  0
8139too                14973  0
firewire_ohci          16733  0
libata                115925  3 ata_generic,ata_piix,ahci
thermal                 9206  0
mmc_core               38781  1 sdhci
8139cp                 13453  0
mii                     2714  2 8139too,8139cp
ehci_hcd               28745  0
firewire_core          31275  2 firewire_sbp2,firewire_ohci
crc_itu_t               1035  1 firewire_core
led_class               1757  1 sdhci
thermal_sys             9378  3 video,processor,thermal
scsi_mod              105157  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore                99530  4 usbhid,uhci_hcd,ehci_hcd
nls_base                4727  1 usbcore
hadon@dizdebian:~$

İşletim sistemi bilgilerini alabileceğim komut çalışmıyor. Debian 6.0 kurulumunu yeni yaptım.

Saygılarımla.

[heartsmagic]

Kod Seç Genişlet

modprobe ipw2200
ne diyor?

Pardon, o modül zaten yüklüymüş.

Kod Seç Genişlet

rfkill list çıktısını bir görebilir miyiz?

[hadon]

Kod Seç Genişlet

rfkill list

Bu komuta "komut yok" yanıtı veriyor.

[heartsmagic]

rfkill komutunu rfkill paketi sağlıyor, kendi ismiyle yani kurup deneyebilirsin. Gerçin sendeki durum biraz garip, ağ arayüzü hiç görünmüyor. İlgili modülü yüklemiş ama sistem, rfkill ne basacak merak ettim ancak onun da arayüzü hiç görmeme durumu olacaktır muhtemelen.

[hadon]

Kurdum ve komutu verdim. Çıktısı şu:

Kod Seç Genişlet

hadon@dizdebian:~$ rfkill list
bash: rfkill: komut yok
hadon@dizdebian:~$ su
Parola:
root@dizdebian:/home/hadon# rfkill list
root@dizdebian:/home/hadon#

[if]

"Firmware" kurulu mu?

http://packages.debian.org/search?keywords=firmware-ipw2x00

[hadon]

"Firmware" kurulu mu?

Az önce kurdum ama bağlantı yöneticisinde ve Wicd uygulamasında sonuç değişmedi.

[if]

@hadon, buraya geçmediğiniz diğer çıktıları da alayım.

http://forum.ubuntu-tr.net/index.php?topic=28764.0

[hadon]

İşletim sistemini gösteren komuta çıktı vermiyor. Sanıyorum Debian 6'a böyle bir dosya yok.

Kod Seç Genişlet

hadon@dizdebian:~$ uname -a
Linux dizdebian 2.6.32-5-686 #1 SMP Fri May 10 08:33:48 UTC 2013 i686 GNU/Linux
hadon@dizdebian:~$

Kod Seç Genişlet

hadon@dizdebian:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce Go 6200/6400] (rev a1)
02:02.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:02.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:02.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
02:02.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
02:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
hadon@dizdebian:~$

Kod Seç Genişlet

hadon@dizdebian:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse
Bus 002 Device 002: ID 1241:1603 Belkin Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
hadon@dizdebian:~$

Kod Seç Genişlet

hadon@dizdebian:~$ rfkill list
bash: rfkill: komut yok
hadon@dizdebian:~$ su
Parola:
root@dizdebian:/home/hadon# rfkill list
root@dizdebian:/home/hadon#

Kod Seç Genişlet

hadon@dizdebian:~$ sudo lshw -C network
[sudo] password for hadon:
hadon is not in the sudoers file.  This incident will be reported.
hadon@dizdebian:~$ su
Parola:
root@dizdebian:/home/hadon# lshw -C network
bash: lshw: komut yok
root@dizdebian:/home/hadon#

Kod Seç Genişlet

hadon@dizdebian:~$ ifconfig
bash: ifconfig: komut yok
hadon@dizdebian:~$ su
Parola:
root@dizdebian:/home/hadon# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:40:d0:80:52:87 
          inet addr:192.168.2.118  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::240:d0ff:fe80:5287/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:192786 errors:0 dropped:0 overruns:0 frame:0
          TX packets:98917 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:282193583 (269.1 MiB)  TX bytes:7268121 (6.9 MiB)
          Interrupt:20 Base address:0xa000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:10 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:660 (660.0 B)  TX bytes:660 (660.0 B)

root@dizdebian:/home/hadon#

Kod Seç Genişlet

hadon@dizdebian:~$ iwconfig
bash: iwconfig: komut yok
hadon@dizdebian:~$ su
Parola:
root@dizdebian:/home/hadon# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

pan0      no wireless extensions.

root@dizdebian:/home/hadon#

Kod Seç Genişlet

root@dizdebian:/home/hadon# iwlist scanning
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

pan0      Interface doesn't support scanning.

root@dizdebian:/home/hadon#

Kod Seç Genişlet

root@dizdebian:/home/hadon# lsmod
Module                  Size  Used by
acpi_cpufreq            4955  0
cpufreq_conservative     4018  0
cpufreq_stats           1997  0
cpufreq_userspace       1488  0
cpufreq_powersave        602  0
parport_pc             15799  0
ppdev                   4058  0
lp                      5570  0
parport                22554  3 parport_pc,ppdev,lp
sco                     5885  2
rfcomm                 25207  0
bridge                 33063  0
stp                      996  1 bridge
bnep                    7468  2
l2cap                  21745  4 rfcomm,bnep
crc16                   1027  1 l2cap
bluetooth              36347  6 sco,rfcomm,bnep,l2cap
rfkill                 10280  3 bluetooth
binfmt_misc             4907  1
uinput                  4796  1
fuse                   44376  1
loop                    9777  0
firewire_sbp2           9663  0
snd_hda_codec_si3054     2410  1
snd_hda_codec_realtek   163390  1
snd_hda_intel          16663  1
snd_hda_codec          46066  3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               4054  1 snd_hda_codec
snd_pcm                47226  3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
nouveau               314968  2
ttm                    33450  1 nouveau
drm_kms_helper         18577  1 nouveau
snd_seq                35495  0
pcmcia                 16194  0
i2c_i801                6462  0
ipw2200               108392  0
rng_core                2178  0
snd_timer              12270  2 snd_pcm,snd_seq
joydev                  6739  0
drm                   112669  4 nouveau,ttm,drm_kms_helper
i2c_algo_bit            3493  1 nouveau
i2c_core               12795  5 nouveau,drm_kms_helper,i2c_i801,drm,i2c_algo_bit
libipw                 18447  1 ipw2200
snd_seq_device          3673  1 snd_seq
tifm_7xx1               3014  0
yenta_socket           16403  1
rsrc_nonstatic          7057  1 yenta_socket
pcmcia_core            20458  3 pcmcia,yenta_socket,rsrc_nonstatic
tifm_core               3268  1 tifm_7xx1
lib80211                2878  2 ipw2200,libipw
snd                    34431  11 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore               3450  1 snd
snd_page_alloc          5061  2 snd_hda_intel,snd_pcm
psmouse                44845  0
ac                      1636  0
serio_raw               2916  0
video                  14605  0
battery                 3782  0
button                  3598  1 nouveau
output                  1204  1 video
pcspkr                  1207  0
evdev                   5609  18
processor              26343  2 acpi_cpufreq
ext3                   94536  1
jbd                    32449  1 ext3
mbcache                 3762  1 ext3
usbhid                 28048  0
hid                    50925  1 usbhid
sg                     19945  0
sr_mod                 10770  0
cdrom                  26435  1 sr_mod
sd_mod                 26029  3
crc_t10dif              1012  1 sd_mod
ata_generic             2247  0
ata_piix               17744  2
sdhci_pci               4589  0
sdhci                  12187  1 sdhci_pci
uhci_hcd               16073  0
ahci                   27814  0
firewire_ohci          16733  0
8139too                14973  0
mmc_core               38781  1 sdhci
libata                115925  3 ata_generic,ata_piix,ahci
thermal                 9206  0
ehci_hcd               28745  0
firewire_core          31275  2 firewire_sbp2,firewire_ohci
crc_itu_t               1035  1 firewire_core
led_class               1757  1 sdhci
8139cp                 13453  0
mii                     2714  2 8139too,8139cp
thermal_sys             9378  3 video,processor,thermal
scsi_mod              105157  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore                99530  4 usbhid,uhci_hcd,ehci_hcd
nls_base                4727  1 usbcore
root@dizdebian:/home/hadon#

Kod Seç Genişlet

dmesg
[    0.093075] pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff]
[    0.093080] pci 0000:00:1e.0: bridge 32bit mmio: [0xb0000000-0xbfffffff]
[    0.093088] pci 0000:00:1e.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff]
[    0.093118] pci_bus 0000:00: on NUMA node 0
[    0.093123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.093343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[    0.093420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.097946] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.098044] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.098140] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.098235] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.098331] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.098426] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.098521] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.098618] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.098713] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.098718] vgaarb: loaded
[    0.098775] PCI: Using ACPI for IRQ routing
[    0.099047] hpet clockevent registered
[    0.099052] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.099058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.099064] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.104016] Switching to clocksource tsc
[    0.105442] pnp: PnP ACPI init
[    0.105450] ACPI: bus type pnp registered
[    0.107656] pnp: PnP ACPI: found 9 devices
[    0.107659] ACPI: ACPI bus type pnp unregistered
[    0.107666] PnPBIOS: Disabled by ACPI PNP
[    0.107675] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.107679] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.107683] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.107687] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.107691] system 00:01: iomem range 0xf0008000-0xf000bfff has been reserved
[    0.107695] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.107699] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.107703] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.107711] system 00:05: ioport range 0x3e0-0x3e1 has been reserved
[    0.107714] system 00:05: ioport range 0x600-0x60f has been reserved
[    0.107718] system 00:05: ioport range 0x680-0x6ff has been reserved
[    0.107722] system 00:05: ioport range 0x800-0x80f has been reserved
[    0.107726] system 00:05: ioport range 0x1000-0x107f has been reserved
[    0.107730] system 00:05: ioport range 0x1180-0x11bf has been reserved
[    0.107733] system 00:05: ioport range 0x1640-0x164f has been reserved
[    0.107737] system 00:05: iomem range 0xe0000000-0xefffffff has been reserved
[    0.107741] system 00:05: iomem range 0xf0008000-0xf000bfff has been reserved
[    0.107745] system 00:05: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.107749] system 00:05: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.107753] system 00:05: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.142456] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.142460] pci 0000:00:01.0:   IO window: 0xc000-0xdfff
[    0.142465] pci 0000:00:01.0:   MEM window: 0xc0000000-0xcfffffff
[    0.142469] pci 0000:00:01.0:   PREFETCH window: 0x90000000-0x9fffffff
[    0.142480] pci 0000:02:02.0: CardBus bridge, secondary bus 0000:03
[    0.142483] pci 0000:02:02.0:   IO window: 0x00a400-0x00a4ff
[    0.142489] pci 0000:02:02.0:   IO window: 0x00a800-0x00a8ff
[    0.142495] pci 0000:02:02.0:   PREFETCH window: 0x80000000-0x83ffffff
[    0.142500] pci 0000:02:02.0:   MEM window: 0xb4000000-0xb7ffffff
[    0.142506] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.142510] pci 0000:00:1e.0:   IO window: 0xa000-0xbfff
[    0.142516] pci 0000:00:1e.0:   MEM window: 0xb0000000-0xbfffffff
[    0.142522] pci 0000:00:1e.0:   PREFETCH window: 0x00000080000000-0x0000008fffffff
[    0.142537] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.142542] pci 0000:00:01.0: setting latency timer to 64
[    0.142549] pci 0000:00:1e.0: setting latency timer to 64
[    0.142560] pci 0000:02:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.142567] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.142570] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.142574] pci_bus 0000:01: resource 0 io:  [0xc000-0xdfff]
[    0.142577] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xcfffffff]
[    0.142581] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x9fffffff]
[    0.142584] pci_bus 0000:02: resource 0 io:  [0xa000-0xbfff]
[    0.142587] pci_bus 0000:02: resource 1 mem: [0xb0000000-0xbfffffff]
[    0.142591] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x8fffffff]
[    0.142594] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.142597] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.142600] pci_bus 0000:03: resource 0 io:  [0xa400-0xa4ff]
[    0.142604] pci_bus 0000:03: resource 1 io:  [0xa800-0xa8ff]
[    0.142607] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[    0.142610] pci_bus 0000:03: resource 3 mem: [0xb4000000-0xb7ffffff]
[    0.142637] NET: Registered protocol family 2
[    0.142717] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.143015] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.143740] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.144177] TCP: Hash tables configured (established 131072 bind 65536)
[    0.144181] TCP reno registered
[    0.144286] NET: Registered protocol family 1
[    0.144324] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.144342] pci 0000:00:1d.0: PCI INT A disabled
[    0.144350] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.144367] pci 0000:00:1d.1: PCI INT B disabled
[    0.144375] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.144392] pci 0000:00:1d.2: PCI INT C disabled
[    0.144402] pci 0000:00:1d.7: enabling device (0000 -> 0002)
[    0.144407] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.144430] pci 0000:00:1d.7: PCI INT A disabled
[    0.144446] pci 0000:01:00.0: Boot video device
[    0.144509] Unpacking initramfs...
[    0.441702] Freeing initrd memory: 8526k freed
[    0.448504] Simple Boot Flag at 0x37 set to 0x1
[    0.448786] audit: initializing netlink socket (disabled)
[    0.448808] type=2000 audit(1377291241.448:1): initialized
[    0.453660] highmem bounce pool size: 64 pages
[    0.453666] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.455276] VFS: Disk quotas dquot_6.5.2
[    0.455338] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.455422] msgmni has been set to 1723
[    0.455636] alg: No test for stdrng (krng)
[    0.455692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.455696] io scheduler noop registered
[    0.455699] io scheduler anticipatory registered
[    0.455701] io scheduler deadline registered
[    0.455739] io scheduler cfq registered (default)
[    0.455859] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.455866] pcieport 0000:00:01.0: setting latency timer to 64
[    0.456086] isapnp: Scanning for PnP cards...
[    0.809401] isapnp: No Plug & Play device found
[    0.810789] Linux agpgart interface v0.103
[    0.810928] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.811322] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.818863] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.822069] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.822075] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.822103] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.822125] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.822147] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.822239] mice: PS/2 mouse device common for all mice
[    0.822441] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.822470] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.822482] cpuidle: using governor ladder
[    0.822484] cpuidle: using governor menu
[    0.822489] No iBFT detected.
[    0.822856] TCP cubic registered
[    0.823028] NET: Registered protocol family 10
[    0.823805] Mobile IPv6
[    0.823808] NET: Registered protocol family 17
[    0.823833] Using IPI No-Shortcut mode
[    0.823899] PM: Resume from disk failed.
[    0.823913] registered taskstats version 1
[    0.824229] rtc_cmos 00:06: setting system clock to 2013-08-23 20:54:02 UTC (1377291242)
[    0.824276] Initalizing network drop monitor service
[    0.824303] Freeing unused kernel memory: 380k freed
[    0.824541] Write protecting the kernel text: 2512k
[    0.824564] Write protecting the kernel read-only data: 924k
[    0.827870] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.844171] udev[46]: starting version 164
[    1.041100] usbcore: registered new interface driver usbfs
[    1.041248] usbcore: registered new interface driver hub
[    1.041394] usbcore: registered new device driver usb
[    1.049422] SCSI subsystem initialized
[    1.057115] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.057138] 8139cp 0000:02:04.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.088658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.088687] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.088706] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.088710] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.088730] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.088765] ehci_hcd 0000:00:1d.7: debug port 1
[    1.092646] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.092831] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xa0000000
[    1.106438] libata version 3.00 loaded.
[    1.109826] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.109864] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.109868] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.109871] usb usb1: Product: EHCI Host Controller
[    1.109874] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.109877] usb usb1: SerialNumber: 0000:00:1d.7
[    1.109974] usb usb1: configuration #1 chosen from 1 choice
[    1.110007] hub 1-0:1.0: USB hub found
[    1.110015] hub 1-0:1.0: 6 ports detected
[    1.118067] firewire_ohci 0000:02:02.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    1.118118] 8139too Fast Ethernet driver 0.9.28
[    1.121367] ahci 0000:00:1f.2: version 3.0
[    1.121382] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.121394] ahci 0000:00:1f.2: PCI INT B disabled
[    1.121399] ahci: probe of 0000:00:1f.2 failed with error -22
[    1.123833] sdhci: Secure Digital Host Controller Interface driver
[    1.123836] sdhci: Copyright(c) Pierre Ossman
[    1.125555] uhci_hcd: USB Universal Host Controller Interface driver
[    1.125599] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.125607] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.125611] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.125621] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.125648] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001200
[    1.125688] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.125692] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.125695] usb usb2: Product: UHCI Host Controller
[    1.125698] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.125700] usb usb2: SerialNumber: 0000:00:1d.0
[    1.125818] usb usb2: configuration #1 chosen from 1 choice
[    1.125887] hub 2-0:1.0: USB hub found
[    1.125896] hub 2-0:1.0: 2 ports detected
[    1.125947] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.125955] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.125958] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.125969] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.126003] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001220
[    1.126036] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.126040] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.126043] usb usb3: Product: UHCI Host Controller
[    1.126046] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.126048] usb usb3: SerialNumber: 0000:00:1d.1
[    1.126160] usb usb3: configuration #1 chosen from 1 choice
[    1.126227] hub 3-0:1.0: USB hub found
[    1.126234] hub 3-0:1.0: 2 ports detected
[    1.126284] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.126292] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.126296] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.126303] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.126334] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001240
[    1.126370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.126373] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.126376] usb usb4: Product: UHCI Host Controller
[    1.126379] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.126381] usb usb4: SerialNumber: 0000:00:1d.2
[    1.126485] usb usb4: configuration #1 chosen from 1 choice
[    1.126552] hub 4-0:1.0: USB hub found
[    1.126560] hub 4-0:1.0: 2 ports detected
[    1.131253] ata_piix 0000:00:1f.2: version 2.13
[    1.131267] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.131272] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.131313] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.131377] scsi0 : ata_piix
[    1.132674] scsi1 : ata_piix
[    1.133817] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[    1.133821] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[    1.188008] firewire_ohci: Added fw-ohci device 0000:02:02.2, OHCI version 1.10
[    1.188115] 8139too 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.189361] eth0: RealTek RTL8139 at 0xa000, 00:40:d0:80:52:87, IRQ 20
[    1.189378] sdhci-pci 0000:02:02.4: SDHCI controller found [104c:8034] (rev 0)
[    1.189393] sdhci-pci 0000:02:02.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.189448] Registered led device: mmc0::
[    1.189480] mmc0: SDHCI controller on PCI [0000:02:02.4] using PIO
[    1.189513] Registered led device: mmc1::
[    1.189535] mmc1: SDHCI controller on PCI [0000:02:02.4] using PIO
[    1.189565] Registered led device: mmc2::
[    1.189587] mmc2: SDHCI controller on PCI [0000:02:02.4] using PIO
[    1.296566] ata1.00: ATA-6: WDC WD800UE-22HCT0, 09.07D09, max UDMA/100
[    1.296571] ata1.00: 156301488 sectors, multi 16: LBA
[    1.296586] ata1.00: applying bridge limits
[    1.296679] ata2.00: ATAPI: Slimtype DVDRW SOSW-833S, V9S1, max UDMA/33
[    1.304380] ata1.00: configured for UDMA/100
[    1.304708] ata2.00: configured for UDMA/33
[    1.304833] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800UE-22HC 09.0 PQ: 0 ANSI: 5
[    1.305673] scsi 1:0:0:0: CD-ROM            Slimtype DVDRW SOSW-833S  V9S1 PQ: 0 ANSI: 5
[    1.328632] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.328690] sd 0:0:0:0: [sda] Write Protect is off
[    1.328694] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.328719] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.328860]  sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.332359] Uniform CD-ROM driver Revision: 3.20
[    1.332629] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.605730]  sda1 sda2 < sda5 sda6 >
[    1.646864] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.659617] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.660032] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    1.660163] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.688074] firewire_core: created device fw0: GUID 0040d00100340811, S400
[    1.911819] usb 2-1: New USB device found, idVendor=1241, idProduct=1603
[    1.911823] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.911827] usb 2-1: Product: USB Keyboard
[    1.911829] usb 2-1: Manufacturer: 
[    1.911923] usb 2-1: configuration #1 chosen from 1 choice
[    1.933261] usbcore: registered new interface driver hiddev
[    1.977306] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[    1.977397] generic-usb 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-1/input0
[    2.066996] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[    2.067072] generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-1/input1
[    2.067098] usbcore: registered new interface driver usbhid
[    2.067238] usbhid: v2.6:USB HID core driver
[    2.156016] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    2.226771] PM: Starting manual resume from disk
[    2.226776] PM: Resume from partition 8:6
[    2.226778] PM: Checking hibernation image.
[    2.255529] PM: Error -22 checking image file
[    2.255531] PM: Resume from disk failed.
[    2.313831] kjournald starting.  Commit interval 5 seconds
[    2.313840] EXT3-fs: mounted filesystem with ordered data mode.
[    2.330898] usb 2-2: New USB device found, idVendor=15d9, idProduct=0a4c
[    2.330902] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.330906] usb 2-2: Product:  USB OPTICAL MOUSE
[    2.331019] usb 2-2: configuration #1 chosen from 1 choice
[    2.348431] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[    2.348516] generic-usb 0003:15D9:0A4C.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
[    4.439981] udev[330]: starting version 164
[    4.852678] Marking TSC unstable due to TSC halts in idle
[    4.853965] processor LNXCPU:00: registered as cooling_device0
[    4.854359] Switching to clocksource hpet
[    4.938813] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    5.237735] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    5.237842] ACPI: Sleep Button [SBTN]
[    5.238206] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[    5.239260] ACPI: Lid Switch [LID]
[    5.239382] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    5.239449] ACPI: Power Button [PWRF]
[    5.247702] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input8
[    5.247786] ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)
[    5.284911] ACPI: Battery Slot [BAT0] (battery present)
[    5.358210] ACPI: AC Adapter [AC] (on-line)
[    5.990592] lib80211: common routines for IEEE802.11 drivers
[    5.990596] lib80211_crypt: registered algorithm 'NULL'
[    6.200499] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04713/0x200000/0x0
[    6.245106] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input9
[    6.526852] yenta_cardbus 0000:02:02.0: CardBus bridge found [1631:c00f]
[    6.526871] yenta_cardbus 0000:02:02.0: Enabling burst memory read transactions
[    6.526877] yenta_cardbus 0000:02:02.0: Using CSCINT to route CSC interrupts to PCI
[    6.526880] yenta_cardbus 0000:02:02.0: Routing CardBus interrupts to PCI
[    6.526887] yenta_cardbus 0000:02:02.0: TI: mfunc 0x01ac1b22, devctl 0x64
[    6.694190] ieee80211: 802.11 data/management/control stack, git-1.1.13
[    6.694194] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[    6.756933] yenta_cardbus 0000:02:02.0: ISA IRQ mask 0x0cf8, PCI irq 17
[    6.756938] yenta_cardbus 0000:02:02.0: Socket status: 30000006
[    6.756942] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[    6.756950] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
[    6.756954] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xbfff: clean.
[    6.757439] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xbfffffff
[    6.757443] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8fffffff
[    6.757907] tifm_7xx1 0000:02:02.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.820428] [drm] Initialized drm 1.1.0 20060810
[    6.872765] intel_rng: FWH not detected
[    6.890342] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[    6.890346] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[    6.890418] ipw2200 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    6.890466] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[    6.890513] ipw2200 0000:02:05.0: firmware: requesting ipw2200-bss.fw
[    7.169471] ACPI: I/O resource 0000:00:1f.3 [0x1400-0x141f] conflicts with ACPI region SMBI [0x1400-0x140f]
[    7.169523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.309211] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[    7.309258] ipw2200: Unable to load firmware: -2
[    7.309300] ipw2200: failed to register network device
[    7.309552] ipw2200 0000:02:05.0: PCI INT A disabled
[    7.309564] ipw2200: probe of 0000:02:05.0 failed with error -5
[    7.529804] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.529811] nouveau 0000:01:00.0: setting latency timer to 64
[    7.545268] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[    7.545497] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x044700a2)
[    7.545783] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[    7.545789] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    7.545792] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    7.625943] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    7.625947] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    7.625951] [drm] nouveau 0000:01:00.0: Bios version 05.44.02.31
[    7.625956] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[    7.625959] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[    7.625964] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2
[    7.625968] [drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[    7.625971] [drm] nouveau 0000:01:00.0:   1: 0x00000141: type 0x41 idx 1 tag 0xff
[    7.625975] [drm] nouveau 0000:01:00.0:   2: 0x00000211: type 0x11 idx 2 tag 0xff
[    7.625978] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[    7.625983] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 030113f3 00000005
[    7.625986] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 020223f1 0080c070
[    7.625995] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDF95
[    7.626324] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE27B
[    7.680386] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE6B3
[    7.680410] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE810
[    7.688136] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE8E1
[    7.688143] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1280x800 (69000kHz pixel clock)
[    7.701155] [TTM] Zone  kernel: Available graphics memory: 441474 kiB.
[    7.701158] [TTM] Zone highmem: Available graphics memory: 1037380 kiB.
[    7.701169] [drm] nouveau 0000:01:00.0: 16 MiB VRAM
[    7.702947] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[    7.703878] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[    7.704886] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[    7.704894] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[    7.704902] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    7.762528] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[    7.763583] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[    7.763680] [drm] nouveau 0000:01:00.0: Detected a TV connector
[    7.765403] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[    7.765408] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1)
[    7.765413] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[    7.765417] [drm] nouveau 0000:01:00.0: 0xD120: Parsing digital output script table
[    7.869398] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[    7.870929] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[    7.871568] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    7.872180] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    7.872878] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    8.028030] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[    8.108157] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x49000, bo f6f9c600
[    8.119830] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[    8.119833] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[    8.119837] [drm] nouveau 0000:01:00.0: 0xD120: Parsing digital output script table
[    8.119848] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[    8.119851] [drm] nouveau 0000:01:00.0: 0xD182: Parsing digital output script table
[    8.268022] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1)
[    8.268025] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[    8.268028] [drm] nouveau 0000:01:00.0: 0xD0FC: Parsing digital output script table
[    8.300920] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.300946] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.436030] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A
[    8.438617] Console: switching to colour frame buffer device 160x50
[    8.441934] fb0: nouveaufb frame buffer device
[    8.441936] registered panic notifier
[    8.444815] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[    8.491234] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[    9.326220] Adding 1557496k swap on /dev/sda6.  Priority:-1 extents:1 across:1557496k
[    9.609220] EXT3 FS on sda5, internal journal
[    9.778146] loop: module loaded
[   11.679606] fuse init (API version 7.13)
[   13.521247] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[   14.996619] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   20.776236] apm: BIOS not found.
[   20.811966] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[   20.813050] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[   22.633948] Bluetooth: Core ver 2.15
[   22.634000] NET: Registered protocol family 31
[   22.634003] Bluetooth: HCI device and connection manager initialized
[   22.634006] Bluetooth: HCI socket layer initialized
[   22.704473] Bluetooth: L2CAP ver 2.14
[   22.704476] Bluetooth: L2CAP socket layer initialized
[   22.820753] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.820757] Bluetooth: BNEP filters: protocol multicast
[   22.894494] Bridge firewalling registered
[   22.913588] Bluetooth: RFCOMM TTY layer initialized
[   22.913593] Bluetooth: RFCOMM socket layer initialized
[   22.913595] Bluetooth: RFCOMM ver 1.11
[   22.989236] Bluetooth: SCO (Voice Link) ver 0.6
[   22.989239] Bluetooth: SCO socket layer initialized
[   25.020016] eth0: no IPv6 routers present
[   25.230142] lp: driver loaded but no devices found
[   25.273787] ppdev: user-space parallel port driver
[  579.336244] ACPI: EC: GPE storm detected, transactions will use polling mode
hadon@dizdebian:~$

Kod Seç Genişlet

hadon@dizdebian:~$ dmesg | tail
[   22.894494] Bridge firewalling registered
[   22.913588] Bluetooth: RFCOMM TTY layer initialized
[   22.913593] Bluetooth: RFCOMM socket layer initialized
[   22.913595] Bluetooth: RFCOMM ver 1.11
[   22.989236] Bluetooth: SCO (Voice Link) ver 0.6
[   22.989239] Bluetooth: SCO socket layer initialized
[   25.020016] eth0: no IPv6 routers present
[   25.230142] lp: driver loaded but no devices found
[   25.273787] ppdev: user-space parallel port driver
[  579.336244] ACPI: EC: GPE storm detected, transactions will use polling mode
hadon@dizdebian:~$

[if]

Kod Seç Genişlet

ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[    7.309258] ipw2200: Unable to load firmware: -2
[    7.309300] ipw2200: failed to register network device
[    7.309552] ipw2200 0000:02:05.0: PCI INT A disabled
[    7.309564] ipw2200: probe of 0000:02:05.0 failed with error -5

"Firmware" yüklenenemiş. Yüklemeden sonra

Kod Seç Genişlet

sudo modprobe -r ipw2200
sudo modprobe ipw2200 komutlarını uyguladınız mı?

Kod Seç Genişlet

dpkg -l | grep ipw
sudo find / -name "ipw*"

[hadon]

İlk ikisinde, aşağıda da görebileceğiniz gibi çıktı vermedi.

Kod Seç Genişlet

hadon@dizdebian:~$ modprobe -r ipw2200
bash: modprobe: komut yok
hadon@dizdebian:~$ su
Parola:
root@dizdebian:/home/hadon# modprobe -r ipw2200

Kod Seç Genişlet

root@dizdebian:/home/hadon# modprobe ipw2200

Kod Seç Genişlet

root@dizdebian:/home/hadon# dpkg -l | grep ipw
ii  firmware-ipw2x00                     0.28+squeeze1                     Binary firmware for Intel Pro Wireless 2100, 2200 and 2915

Kod Seç Genişlet

root@dizdebian:/home/hadon# find / -name "ipw*"
/lib/firmware/ipw2200-bss.fw
/lib/firmware/ipw2100-1.3-i.fw
/lib/firmware/ipw2200-sniffer.fw
/lib/firmware/ipw2200-ibss.fw
/lib/firmware/ipw2100-1.3.fw
/lib/firmware/ipw2100-1.3-p.fw
/lib/firmware/ipw2x00.LICENSE
/lib/modules/2.6.32-5-686/kernel/drivers/usb/serial/ipw.ko
/lib/modules/2.6.32-5-686/kernel/drivers/char/pcmcia/ipwireless
/lib/modules/2.6.32-5-686/kernel/drivers/char/pcmcia/ipwireless/ipwireless.ko
/lib/modules/2.6.32-5-686/kernel/drivers/net/wireless/ipw2x00
/lib/modules/2.6.32-5-686/kernel/drivers/net/wireless/ipw2x00/ipw2100.ko
/lib/modules/2.6.32-5-686/kernel/drivers/net/wireless/ipw2x00/ipw2200.ko
/proc/irq/21/ipw2200
/sys/bus/pci/drivers/ipw2200
/sys/module/lib80211/holders/ipw2200
/sys/module/libipw/holders/ipw2200
/sys/module/ipw2200
/dev/.udev/firmware-missing/ipw2200-bss.fw
root@dizdebian:/home/hadon#


[if]

Olması gerektiği gibi her şey şu an.

Kod Seç Genişlet

iwconfig ile ağ arayüzü görünmüyor mu?

[hadon]

Olmadı galiba.

Kod Seç Genişlet

root@dizdebian:/home/hadon# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      radio off  ESSID:off/any 
          Mode:Managed  Channel:0  Access Point: Not-Associated   
          Bit Rate:0 kb/s   Tx-Power=off   Sensitivity=8/0 
          Retry limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

pan0      no wireless extensions.

root@dizdebian:/home/hadon#

[if]

@hadon, eth1 kablosuz arayüz işte. Ağa bağlanmaya çalıştınız mı?

[hadon]

@hadon, eth1 kablosuz arayüz işte. Ağa bağlanmaya çalıştınız mı?

Evet, kablosuz bağlantı yapılabilir hale geldi ama hâlâ bazı sorunlar var. Network Manager'de kablosuz bir arayüz tanımlayamıyorum. Ne yazarsam yazayım "uygula" düğmesi etkin hale gelmiyor. Wired ile deniyorum; tarama yapıp benim ağımı buluyor ama bütün cihazlarla bağlanabildiğim şifremi kabul etmiyor. Belki 20 kere denedim, her seferinde "Hatalı Parola" yazdı ve bağlanamadı.

Acaba bağlanmaya çalışmadan önce yapmam gereken başka bir şey daha mı vardı?

[if]

@hadon, kablosuz arayüz tanımlama nedir? "Wired" nedir? Wicd mi yoksa?

[hadon]

@hadon, kablosuz arayüz tanımlama nedir? "Wired" nedir? Wicd mi yoksa?

Sevgili İf, gecenin bu saatinde, bir de hasta halimle (Antalya'nın cehennemi sıcağında grip oldum) kafam o kadar karışmış ki bir türlü toparlayamıyorum. Eksik/hatalı bilgi verdiğim için özür dilerim.

Kablosuz arayüz tanımlama derken, Debian 6'da üst çubukta çıkan "NetworkManager Programcığı" adlı, kablolu, kablosuz, mobil geniş bant, VPN ve DSL bağlantılarını düzenleyen programcık üzerinde, kablosuz sekmesinin tanımlanmasından söz ediyorum. Galiba "Arayüz" sözcüğü yanlış/gereksiz oldu.

Wired dediğim de tahmin ettiğiniz gibi Wicd.

Gene kızacaksınız ama şu an bu satırları kablosuz bağlantı üzerinden yazıyorum. Mutlu değilmiş gibi görünmemin nedeni ise listelediği çok sayıdaki ağdan hangisine bağlandığını anlayamamış olmam. Çünkü bir çok güvenliksiz ağ görünüyor ve benim ağımın parolasını kabul etmiyordu.

İlginiz için çok teşekkür ediyor, tekrar özür diliyorum.

[if]

Geçmiş olsun @hadon. Özür dilemenize hiç gerek yok:) Ne yaptığımızdan emin olmak için soruyorum sorularımı sadece:)

Şu durumda kablosuz ağınızın şifreleme türünü değiştirip dener misiniz? WEP yapın meselâ? Eğer kablosuz bağlantınız gizli ağ ise görünür yapın.

[hadon]

Çok teşekkür ederim sevgili İf. İlginç bir durum keşfettim. Network Manager ile Wicd arasında galiba bir çakışma durumu var. Network Manager ayarlarında "Ağ Yönetimi Etkin" konumundayken Wicd üzerinden kablosuz bağlanılamıyor. Wicd çalışıp çalışıp, "Hatalı Parola" uyarısı veriyor. Ne zaman Network Manager'de ağ yönetimininin etkinliğine son verirsem çubuktaki Wicd simgesinde bağlantının sağlandığını anlatan yeşil renk beliriyor.

Sayenizde bu sorunu da aştım. Tekrar teşekkürler.

[if]

@Bir şey değil @hadon. Ağ yçneticisi ile Wicd'i beraber kullanmamalısınız.