Ubuntu açılışında yavaşlama

[harzemsah]

Merhaba. Önceden ubuntum hızlı açılıyordu ama şimdi 2-3 dk gecikmeli açılıyor nedenini ne olabilir

[heartsmagic]

Bu bölüm açıklamasında yazdığı üzere 13.10'a ait bir bölüm, konuyu taşıyalım.

Forumda sorununla alakalı araştırma yaptın mı? Birebir aynı öneriler iş görmese bile senden isteyeceğimiz çıktılar aynı olacaktır. Lütfen o çıktıları buraya geç. En azından şu çıktıyı görmemiz gerekir:

Kod Seç Genişlet

dmesg

Çıktıyı kod etiketi içinde geçersin: cozuldukonusu

[cokomoko]

Şimdi bu konu başlığı aslında yanlış yazılmış, ubuntu açılış hızında yavaşlamadan bahsediliyor çünkü. Onun için ubuntu açılış hızında yavaşlama olarak düzeltilirse iyi olur. Zira ubuntuda bir yavaşlamadan söz edilmemiş.

Bu açılış hızı probleminden bende muzdariptim(gerçi benimki biraz farklıydı) ama kısa bir süre önce aldığım güncellemeyle sorunum çözülmüştü. Açılışın yavaş olmasıyla ilgili bir çok neden olabilir. dmesg çıktısı bize önemli bir fikir verecektir ancak ben şu yolları da denemeni isterim.
İlk önce başlangıç uygulamalarından gereksiz olanları kapat, sonra boot up manager'i kur orada sekmeler var; hizmetler falan filan(şimdi arch üzerinde olduğumdan bakamıyorum seçenekler neydi diye) bu hizmetlerden gereksiz olanları kapat, uygula ve çık.

Gizli olan başlangıç uygulamalarını göstermek için

Kod Seç Genişlet

cd /etc/xdg/autostart/
sudo sed --in-place 's/NoDisplay=true/NoDisplay=false/g' *.desktop

[harzemsah]

öncelikle yanlış gördüğümü söylemeliyim. dikkatsiz davranmışım orada sanki 13.04 yazıyordu. neyse uç birim çıktısı:

Kod Seç Genişlet


[    0.214269] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.214271] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.214290] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.214327] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.214330] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.214365] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.214389] pnp 00:08: Plug and Play ACPI device, IDs SYN2704 SYN2700 SYN0002 PNP0f13 (active)
[    0.214489] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.214491] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.214493] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.214495] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.214497] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.214498] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.214500] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.214502] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.214504] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.214506] system 00:09: [mem 0xc1400000-0xc1400fff] has been reserved
[    0.214508] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.214713] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[    0.214715] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[    0.214717] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.214729] pnp: PnP ACPI: found 11 devices
[    0.214731] ACPI: ACPI bus type pnp unregistered
[    0.220648] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.220650] pci 0000:07:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.220687] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc1500000-0xc15fffff pref]
[    0.220689] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0040000-0xc005ffff pref]
[    0.220692] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.220694] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.220697] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.220699] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.220703] pci 0000:07:00.0: BAR 6: assigned [mem 0xc1500000-0xc150ffff pref]
[    0.220705] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.220710] pci 0000:00:1c.0:   bridge window [mem 0xc1200000-0xc12fffff]
[    0.220715] pci 0000:00:1c.0:   bridge window [mem 0xc1500000-0xc15fffff pref]
[    0.220721] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.220727] pci 0000:00:1c.1:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.220735] pci 0000:00:1c.2: PCI bridge to [bus 09]
[    0.220738] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.220745] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc10fffff 64bit pref]
[    0.220780] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.220782] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.220784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.220786] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff]
[    0.220788] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.220789] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[    0.220791] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.220793] pci_bus 0000:07: resource 1 [mem 0xc1200000-0xc12fffff]
[    0.220794] pci_bus 0000:07: resource 2 [mem 0xc1500000-0xc15fffff pref]
[    0.220796] pci_bus 0000:08: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.220798] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.220800] pci_bus 0000:09: resource 2 [mem 0xc1000000-0xc10fffff 64bit pref]
[    0.220826] NET: Registered protocol family 2
[    0.220954] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.221081] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.221174] TCP: Hash tables configured (established 32768 bind 32768)
[    0.221194] TCP: reno registered
[    0.221202] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.221219] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.221270] NET: Registered protocol family 1
[    0.253610] pci 0000:01:00.0: Boot video device
[    0.253636] PCI: CLS 64 bytes, default 64
[    0.253703] Trying to unpack rootfs image as initramfs...
[    0.486459] Freeing initrd memory: 15836k freed
[    0.488508] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.488513] software IO TLB [mem 0xab2bc000-0xaf2bc000] (64MB) mapped at [ffff8800ab2bc000-ffff8800af2bbfff]
[    0.488547] Simple Boot Flag at 0x44 set to 0x1
[    0.488913] Initialise module verification
[    0.488951] audit: initializing netlink socket (disabled)
[    0.488962] type=2000 audit(1375860097.484:1): initialized
[    0.513766] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.514894] VFS: Disk quotas dquot_6.5.2
[    0.514928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.515293] fuse init (API version 7.20)
[    0.515349] msgmni has been set to 7842
[    0.515683] Key type asymmetric registered
[    0.515686] Asymmetric key parser 'x509' registered
[    0.515711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.515735] io scheduler noop registered
[    0.515737] io scheduler deadline registered (default)
[    0.515741] io scheduler cfq registered
[    0.515828] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.515984] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.515995] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.516027] intel_idle: MWAIT substates: 0x21120
[    0.516028] intel_idle: v0.4 model 0x2A
[    0.516029] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.516552] ACPI: AC Adapter [ACAD] (on-line)
[    0.516764] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.516767] ACPI: Power Button [PWRB]
[    0.516867] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.517073] ACPI: Lid Switch [LID0]
[    0.517107] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.517110] ACPI: Power Button [PWRF]
[    0.517171] ACPI: Requesting acpi_cpufreq
[    0.520971] thermal LNXTHERM:00: registered as thermal_zone0
[    0.520973] ACPI: Thermal Zone [THRM] (45 C)
[    0.520999] GHES: HEST is not enabled!
[    0.521083] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.522561] Linux agpgart interface v0.103
[    0.523517] brd: module loaded
[    0.524009] loop: module loaded
[    0.524241] libphy: Fixed MDIO Bus: probed
[    0.524289] tun: Universal TUN/TAP device driver, 1.6
[    0.524290] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.524318] PPP generic driver version 2.4.2
[    0.524349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.524350] ehci-pci: EHCI PCI platform driver
[    0.524383] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.524387] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.524391] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.524404] ehci-pci 0000:00:1a.0: debug port 2
[    0.528290] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.528306] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1319000
[    0.537215] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.537324] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.537326] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.537328] usb usb1: Product: EHCI Host Controller
[    0.537330] usb usb1: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[    0.537331] usb usb1: SerialNumber: 0000:00:1a.0
[    0.537411] hub 1-0:1.0: USB hub found
[    0.537415] hub 1-0:1.0: 2 ports detected
[    0.537511] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.537514] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.537519] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.537531] ehci-pci 0000:00:1d.0: debug port 2
[    0.541425] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.541444] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1318000
[    0.553184] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.553254] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.553298] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.553299] usb usb2: Product: EHCI Host Controller
[    0.553301] usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[    0.553303] usb usb2: SerialNumber: 0000:00:1d.0
[    0.553368] hub 2-0:1.0: USB hub found
[    0.553371] hub 2-0:1.0: 2 ports detected
[    0.553448] ehci-platform: EHCI generic platform driver
[    0.553453] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.553463] uhci_hcd: USB Universal Host Controller Interface driver
[    0.553496] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.553499] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.553503] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.553587] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.553629] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.553673] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.553675] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.553676] usb usb3: Product: xHCI Host Controller
[    0.553678] usb usb3: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[    0.553680] usb usb3: SerialNumber: 0000:00:14.0
[    0.553733] xHCI xhci_add_endpoint called for root hub
[    0.553734] xHCI xhci_check_bandwidth called for root hub
[    0.553749] hub 3-0:1.0: USB hub found
[    0.553755] hub 3-0:1.0: 4 ports detected
[    0.553983] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.553987] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.554005] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.554007] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.554008] usb usb4: Product: xHCI Host Controller
[    0.554010] usb usb4: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[    0.554011] usb usb4: SerialNumber: 0000:00:14.0
[    0.554060] xHCI xhci_add_endpoint called for root hub
[    0.554061] xHCI xhci_check_bandwidth called for root hub
[    0.554076] hub 4-0:1.0: USB hub found
[    0.554082] hub 4-0:1.0: 4 ports detected
[    0.554384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.560290] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.560295] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.560385] mousedev: PS/2 mouse device common for all mice
[    0.560508] rtc_cmos 00:05: RTC can wake from S4
[    0.560644] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.560677] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.560741] device-mapper: uevent: version 1.0.3
[    0.560791] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    0.560850] cpuidle: using governor ladder
[    0.560930] cpuidle: using governor menu
[    0.560934] ledtrig-cpu: registered to indicate activity on CPUs
[    0.560935] EFI Variables Facility v0.08 2004-May-17
[    0.561094] ashmem: initialized
[    0.561205] TCP: cubic registered
[    0.561278] NET: Registered protocol family 10
[    0.561410] NET: Registered protocol family 17
[    0.561419] Key type dns_resolver registered
[    0.561616] Loading module verification certificates
[    0.562467] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b19078b01b96b975438ce0719f8a7eb15318eb67'
[    0.562478] registered taskstats version 1
[    0.564666] Key type trusted registered
[    0.566230] Key type encrypted registered
[    0.568039] rtc_cmos 00:05: setting system clock to 2013-08-07 07:21:37 UTC (1375860097)
[    0.568761] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.568762] EDD information not available.
[    0.579082] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.605310] ACPI: Battery Slot [BAT1] (battery present)
[    0.606449] Freeing unused kernel memory: 996k freed
[    0.606541] Write protecting the kernel read-only data: 12288k
[    0.608920] Freeing unused kernel memory: 1168k freed
[    0.611065] Freeing unused kernel memory: 1080k freed
[    0.619707] udevd[108]: starting version 175
[    0.644074] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.644299] r8169 0000:09:00.0: irq 42 for MSI/MSI-X
[    0.644437] r8169 0000:09:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000065e000, 30:f9:ed:bc:44:d2, XID 0c900800 IRQ 42
[    0.644439] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.645410] Disabling lock debugging due to kernel taint
[    0.646064] ahci 0000:00:1f.2: version 3.0
[    0.646126] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    0.646156] ahci: SSS flag set, parallel bus scan disabled
[    0.661126] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    0.661131] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    0.661137] ahci 0000:00:1f.2: setting latency timer to 64
[    0.669609] scsi0 : ahci
[    0.670630] scsi1 : ahci
[    0.670762] scsi2 : ahci
[    0.672064] scsi3 : ahci
[    0.672129] scsi4 : ahci
[    0.672180] scsi5 : ahci
[    0.672232] ata1: SATA max UDMA/133 abar m2048@0xc1317000 port 0xc1317100 irq 43
[    0.672234] ata2: DUMMY
[    0.672236] ata3: DUMMY
[    0.672237] ata4: DUMMY
[    0.672240] ata5: SATA max UDMA/133 abar m2048@0xc1317000 port 0xc1317300 irq 43
[    0.672241] ata6: DUMMY
[    0.674968] rtsx_pci 0000:08:00.0: irq 44 for MSI/MSI-X
[    0.674986] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
[    0.848915] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.981061] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.981065] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.981320] hub 1-1:1.0: USB hub found
[    0.981415] hub 1-1:1.0: 6 ports detected
[    0.988702] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.029686] ata1.00: ATA-8: WDC WD6400BPVT-55HXZT3, 01.01A01, max UDMA/133
[    1.029696] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.035076] ata1.00: configured for UDMA/133
[    1.035336] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400BPVT-5 01.0 PQ: 0 ANSI: 5
[    1.035481] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.035498] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.035561] sd 0:0:0:0: [sda] Write Protect is off
[    1.035564] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.035584] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.069069]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.069899] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.092592] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.224894] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.224905] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.225286] hub 2-1:1.0: USB hub found
[    1.225472] hub 2-1:1.0: 6 ports detected
[    1.352254] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.353933] ata5.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133
[    1.356311] ata5.00: configured for UDMA/133
[    1.358704] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8C0    1.00 PQ: 0 ANSI: 5
[    1.363050] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.363060] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.363256] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.363325] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.392132] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[    1.411111] usb 3-4: New USB device found, idVendor=046d, idProduct=c52f
[    1.411122] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.411128] usb 3-4: Product: USB Receiver
[    1.411134] usb 3-4: Manufacturer: Logitech
[    1.418542] usbcore: registered new interface driver usbhid
[    1.418551] usbhid: USB HID core driver
[    1.420697] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input4
[    1.420819] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    1.421523] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input5
[    1.421644] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    1.484087] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[    1.484091] Switching to clocksource tsc
[    1.484148] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[    1.577870] usb 1-1.2: New USB device found, idVendor=0489, idProduct=e036
[    1.577880] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.577886] usb 1-1.2: Product: Bluetooth USB Host Controller
[    1.577892] usb 1-1.2: Manufacturer: Atheros Communications
[    1.577896] usb 1-1.2: SerialNumber: Alaska Day 2006
[    1.647969] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    1.746149] usb 1-1.3: New USB device found, idVendor=05ca, idProduct=18c3
[    1.746158] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.746164] usb 1-1.3: Product: USB2.0 Camera
[    1.746168] usb 1-1.3: Manufacturer: LOEA11P2BF13827507734
[    3.382859] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   11.483015] Adding 4162556k swap on /dev/sda5.  Priority:-1 extents:1 across:4162556k
[   11.736584] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.751149] udevd[383]: starting version 175
[   12.025152] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[   12.028246] mei 0000:00:16.0: setting latency timer to 64
[   12.028313] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[   12.029344] lp: driver loaded but no devices found
[   12.039047] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[   12.039055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.039060] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   12.039064] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.039065] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   12.039069] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.039070] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.044770] cfg80211: Calling CRDA to update world regulatory domain
[   12.045564] Bluetooth: Core ver 2.16
[   12.045584] NET: Registered protocol family 31
[   12.045586] Bluetooth: HCI device and connection manager initialized
[   12.045597] Bluetooth: HCI socket layer initialized
[   12.045600] Bluetooth: L2CAP socket layer initialized
[   12.045605] Bluetooth: SCO socket layer initialized
[   12.047949] usbcore: registered new interface driver btusb
[   12.048570] [drm] Initialized drm 1.1.0 20060810
[   12.084763] [drm] radeon defaulting to kernel modesetting.
[   12.084767] [drm] radeon kernel modesetting enabled.
[   12.089845] [drm] initializing kernel modesetting (TURKS 0x1002:0x6841 0x104D:0x90AB).
[   12.089888] [drm] register mmio base: 0xC0000000
[   12.089891] [drm] register mmio size: 131072
[   12.089963] ATOM BIOS: THAMES
[   12.089993] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   12.089996] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   12.090001] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
[   12.090003] [drm] Detected VRAM RAM=1024M, BAR=256M
[   12.090005] [drm] RAM width 128bits DDR
[   12.090576] [TTM] Zone  kernel: Available graphics memory: 2009420 kiB
[   12.090579] [TTM] Initializing pool allocator
[   12.090583] [TTM] Initializing DMA pool allocator
[   12.090604] [drm] radeon: 1024M of VRAM memory ready
[   12.090606] [drm] radeon: 512M of GTT memory ready.
[   12.090649] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   12.091118] [drm] probing gen 2 caps for device 8086:101 = 2/0
[   12.091124] [drm] PCIE gen 2 link speeds already enabled
[   12.092244] [drm] Loading TURKS Microcode
[   12.093957] sony_laptop: Sony Notebook Control Driver v0.6
[   12.094476] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input6
[   12.095274] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input7
[   12.099987] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[   12.104551] acpi device:2d: registered as cooling_device4
[   12.104570] ACPI: Video Device [DGPU] (multi-head: yes  rom: no  post: no)
[   12.104676] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input8
[   12.106160] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[   12.108214] ath: phy0: ASPM enabled: 0x42
[   12.108218] ath: EEPROM regdomain: 0x65
[   12.108219] ath: EEPROM indicates we should expect a direct regpair map
[   12.108222] ath: Country alpha2 being used: 00
[   12.108223] ath: Regpair used: 0x65
[   12.113182] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[   12.115492] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.115973] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.116233] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010c80000, irq=16
[   12.142268] kvm: disabled by bios
[   12.151917] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   12.165641] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.165722] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.178469] cfg80211: World regulatory domain updated:
[   12.178471] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.178472] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.178474] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.178475] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.178476] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.178477] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.220536] usbcore: registered new interface driver ath3k
[   12.221021] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   12.221153] radeon 0000:01:00.0: WB enabled
[   12.221156] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88013adc9c00
[   12.221158] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88013adc9c0c
[   12.221160] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.221161] [drm] Driver supports precise vblank timestamp query.
[   12.221200] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[   12.221210] radeon 0000:01:00.0: radeon: using MSI.
[   12.221233] [drm] radeon: irq initialized.
[   12.237511] [drm] ring test on 0 succeeded in 1 usecs
[   12.237571] [drm] ring test on 3 succeeded in 1 usecs
[   12.237774] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.237798] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.248710] type=1400 audit(1375849309.191:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=557 comm="apparmor_parser"
[   12.248941] type=1400 audit(1375849309.191:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=658 comm="apparmor_parser"
[   12.248948] type=1400 audit(1375849309.191:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=558 comm="apparmor_parser"
[   12.249000] type=1400 audit(1375849309.191:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser"
[   12.249159] type=1400 audit(1375849309.191:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
[   12.249285] type=1400 audit(1375849309.191:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser"
[   12.249291] type=1400 audit(1375849309.191:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=558 comm="apparmor_parser"
[   12.249479] type=1400 audit(1375849309.191:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser"
[   12.249485] type=1400 audit(1375849309.191:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=558 comm="apparmor_parser"
[   12.254511] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[   12.290309] usb 1-1.2: USB disconnect, device number 3
[   12.294030] [drm] radeon atom DIG backlight initialized
[   12.294043] [drm] Radeon Display Connectors
[   12.294050] [drm] Connector 0:
[   12.294056] [drm]   LVDS-1
[   12.294065] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   12.294070] [drm]   Encoders:
[   12.294075] [drm]     LCD1: INTERNAL_UNIPHY
[   12.294080] [drm] Connector 1:
[   12.294085] [drm]   HDMI-A-1
[   12.294090] [drm]   HPD1
[   12.294098] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   12.294102] [drm]   Encoders:
[   12.294107] [drm]     DFP1: INTERNAL_UNIPHY1
[   12.294112] [drm] Connector 2:
[   12.294117] [drm]   VGA-1
[   12.294131] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   12.294133] [drm]   Encoders:
[   12.294134] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.294191] [drm] Internal thermal controller without fan control
[   12.295051] [drm] radeon: power management initialized
[   12.489791] usb 1-1.2: new full-speed USB device number 5 using ehci-pci
[   12.529597] Linux video capture interface: v2.00
[   12.535051] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05ca:18c3)
[   12.536722] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
[   12.536794] usbcore: registered new interface driver uvcvideo
[   12.536797] USB Video Class driver (1.1.1)
[   12.583665] usb 1-1.2: New USB device found, idVendor=0489, idProduct=e036
[   12.583668] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.583670] usb 1-1.2: Product: Bluetooth USB Host Controller
[   12.583671] usb 1-1.2: Manufacturer: Atheros Communications
[   12.583673] usb 1-1.2: SerialNumber: Alaska Day 2006
[   12.694976] [drm] fb mappable at 0xB0142000
[   12.694978] [drm] vram apper at 0xB0000000
[   12.694979] [drm] size 4325376
[   12.694980] [drm] fb depth is 24
[   12.694981] [drm]    pitch is 5632
[   12.695119] fbcon: radeondrmfb (fb0) is primary device
[   12.822525] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 1999, fw id: 1106483
[   12.856137] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[   13.484837] Console: switching to colour frame buffer device 170x48
[   13.486667] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   13.486669] radeon 0000:01:00.0: registered panic notifier
[   13.486681] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[   13.486734] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   13.486816] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   13.493819] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   15.619903] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   16.060352] init: failsafe main process (884) killed by TERM signal
[   16.480594] Bluetooth: RFCOMM TTY layer initialized
[   16.480607] Bluetooth: RFCOMM socket layer initialized
[   16.480608] Bluetooth: RFCOMM ver 1.11
[   16.482538] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.482541] Bluetooth: BNEP filters: protocol multicast
[   16.482546] Bluetooth: BNEP socket layer initialized
[   16.974308] init: avahi-cups-reload main process (968) terminated with status 1
[   17.012548] ppdev: user-space parallel port driver
[   17.021053] type=1400 audit(1375849313.971:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=984 comm="apparmor_parser"
[   17.147880] usb 1-1.2: USB disconnect, device number 5
[   17.470160] audit_printk_skb: 3 callbacks suppressed
[   17.470163] type=1400 audit(1375849314.419:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1010 comm="apparmor_parser"
[   17.470374] type=1400 audit(1375849314.419:14): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1012 comm="apparmor_parser"
[   17.470388] type=1400 audit(1375849314.419:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1010 comm="apparmor_parser"
[   17.470657] type=1400 audit(1375849314.419:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1009 comm="apparmor_parser"
[   17.470725] type=1400 audit(1375849314.419:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1012 comm="apparmor_parser"
[   17.470923] type=1400 audit(1375849314.419:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1012 comm="apparmor_parser"
[   17.470929] type=1400 audit(1375849314.419:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1009 comm="apparmor_parser"
[   17.473974] type=1400 audit(1375849314.423:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1016 comm="apparmor_parser"
[   17.474314] type=1400 audit(1375849314.423:21): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1016 comm="apparmor_parser"
[   17.476540] type=1400 audit(1375849314.427:22): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1015 comm="apparmor_parser"
[   18.569059] init: smbd main process (889) killed by HUP signal
[   18.569078] init: smbd main process ended, respawning
[   18.646792] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.647038] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.003426] r8169 0000:09:00.0 eth0: link down
[   19.003475] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.003744] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   46.961166] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[   46.978977] usb 3-2: New USB device found, idVendor=19d2, idProduct=2000
[   46.978987] usb 3-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[   46.978993] usb 3-2: Product: ZTE WCDMA Technologies MSM
[   46.978999] usb 3-2: Manufacturer: ZTE,Incorporated
[   46.979004] usb 3-2: SerialNumber: MF1900AVED010000
[   47.191390] Initializing USB Mass Storage driver...
[   47.191490] scsi6 : usb-storage 3-2:1.0
[   47.191556] usbcore: registered new interface driver usb-storage
[   47.191558] USB Mass Storage support registered.
[   48.188739] scsi 6:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[   48.190953] sr1: scsi-1 drive
[   48.191120] sr 6:0:0:0: Attached scsi CD-ROM sr1
[   48.191915] sr 6:0:0:0: Attached scsi generic sg2 type 5
[  158.249241] usb 3-2: USB disconnect, device number 3
[  158.616714] usb 3-2: new high-speed USB device number 4 using xhci_hcd
[  158.635171] usb 3-2: New USB device found, idVendor=19d2, idProduct=0031
[  158.635182] usb 3-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[  158.635188] usb 3-2: Product: ZTE WCDMA Technologies MSM
[  158.635193] usb 3-2: Manufacturer: ZTE,Incorporated
[  158.635198] usb 3-2: SerialNumber: MF1900AVED010000
[  158.638494] scsi7 : usb-storage 3-2:1.2
[  158.738505] usbcore: registered new interface driver usbserial
[  158.738519] usbcore: registered new interface driver usbserial_generic
[  158.738532] usbserial: USB Serial support registered for generic
[  158.892704] usbcore: registered new interface driver option
[  158.892721] usbserial: USB Serial support registered for GSM modem (1-port)
[  158.893216] option 3-2:1.0: GSM modem (1-port) converter detected
[  158.893383] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB0
[  158.893415] option 3-2:1.1: GSM modem (1-port) converter detected
[  158.893642] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB1
[  158.893679] option 3-2:1.3: GSM modem (1-port) converter detected
[  158.893818] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB2
[  159.636159] scsi 7:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[  159.636697] scsi 7:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[  159.639123] sr1: scsi-1 drive
[  159.639229] sr 7:0:0:0: Attached scsi CD-ROM sr1
[  159.639294] sr 7:0:0:0: Attached scsi generic sg2 type 5
[  159.639451] sd 7:0:0:1: Attached scsi generic sg3 type 0
[  159.642676] sd 7:0:0:1: [sdb] Attached SCSI removable disk
[  199.188374] PPP BSD Compression module registered
[  199.215363] PPP Deflate Compression module registered


[cokomoko]

Kod Seç Genişlet

[    3.382859] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   11.483015] Adding 4162556k swap on /dev/sda5.  Priority:-1 extents:1 across:4162556k

Burada 8sn. bekliyor.  Ubuntu Canlı(Live) cd ile sistemi açıp

Kod Seç Genişlet

fsck -f -y -v /dev/sda6 komutunu ver sonra ubuntuyu bir daha aç, dmesg çıktısını ver.

Bu arada bir önceki mesajımda dediklerimi denedin mi?

[harzemsah]

boot up programını çalıştırdım. ekran resmini koyamadım. Resmi yapıştır dedim ama yapmadı. zaten  7 program aktif bir şekilde çalışıyordu.
dedğiniz kodları uç birime yazdım ama bir şey gözükmüyor. çıktısını veriyorum.

Kod Seç Genişlet


@:/etc/xdg/autostart$ sudo sed --in-place 's/NoDisplay=true/NoDisplay=false/g' *.desktop
@:/etc/xdg/autostart$ 


[cokomoko]

Sistem Araçları>Tercihler>Başlangıç Uygulamaları veya süper tuşu(Windows simgesi olan)na bas, başlangıç uygulamaları yaz, çıkar.

[harzemsah]

 5 program kapattım başka yapmam gereken bir şey var mı ? Ubuntu Canlı(Live) cd ile sistemi nasıl açacağım bu konuda da yardımcı olrsan sevinirim

[cokomoko]

Elindeki ubuntu live cd'sini bilgisayara tak, boot ayarlarından cd'den başlatmayı seç. Yani sen ubuntu kurarken nasıl cd'den başlattıysan o şekilde aç, sonra türkçe'yi seç ubuntu dene'ye tıkla.Sonra ctrl+alt+t ile terminali aç verdiğim komutu yaz.

Kod Seç Genişlet

fsck -f -y -v /dev/sda6

[harzemsah]

bunu bu gün yapamam yarın sana sonucu söylerim. birde bunu yaptığımızda sda6 bölümünde ne olacak. biraz bilgi verir misin . ne amaç ile yaptığımı bileyim. körü körüne yapmak istemem.

[cokomoko]

Bir de heartsmagic'in şurda yazdığını dene
http://forum.ubuntu-tr.net/index.php?topic=34674.msg417794#msg417794


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ağustos 2013 - 12:15:13

bunu bu gün yapamam yarın sana sonucu söylerim. birde bunu yaptığımızda sda6 bölümünde ne olacak. biraz bilgi verir misin . ne amaç ile yaptığımı bileyim. körü körüne yapmak istemem.

Forumda arama yapabilirsin, senin konunla ilgili birçok konu açılmış, onları bir incele.
Misal wiki'ye bak http://wiki.ubuntu-tr.net/index.php/Fsck

[harzemsah]

ilginiz için sağolun. şu aralar malum hem bayram hem de çok yoğunum. o yüzden ubunntu ile ilgilenemiyorum. ama ubuntu kullanıyorum günlük işler de artık windowsu pek açmıyorum. biraz yavaş açılması ile daha sonra ilgileneceğim inşallah. ilginiz için sağolun.

[cokomoko]

Eğer sistemi bozmaktan korkuyorsanız.
Remastersys uygulaması ile veya başka herhangi bir yedekleme uygulaması ile yedek alıp, sorununuzla ilgili burada ve forumda yazılanları deneyebilirsiniz.
Kaldı ki sistemi bozmaktan korkmayın, sistemi bozmadıkça, onunla cebelleşmedikçe onu anlayamazsınız.

İyi bayramlar bu arada bol GNU/Linux'lu günler...

[heartsmagic]

Bir de bu sisteme USB disk vs. mi bağlı?

[harzemsah]

Açıkcası ubuntu ve windowsu birlikte kullanmak için tam 4 defa sistemi çökerttim ve tekrar format attım. Format atmaktan sıkıldım diyebilirim. Daha önce format atmak için bios ayarlarını değiştirmiştim ondan olabilir mi?@heartsmagic Bilgisayara internete girmek için avea jet takıyordum. onun haricinde bir usb filan takmıyorum.

[heartsmagic]

Peki açılışta takılı oluyor mu Avea JET?

[harzemsah]

bazen takıyorum bazen ise hayır ama açılma yavaşlığı sürekli oluyor.

[heartsmagic]

Takmadığın zaman dmesg çıktısına tekrar bakabilir miyiz?

[harzemsah]

aşağıda veriyorum:

Kod Seç Genişlet


[    0.661074] pci 0000:09:00.0: supports D1 D2
[    0.661075] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.668752] pci 0000:00:1c.2: PCI bridge to [bus 09]
[    0.668762] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.668781] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc10fffff 64bit pref]
[    0.668867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.668896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.668920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.668949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.669023] \_SB_.PCI0:_OSC invalid UUID
[    0.669024] _OSC request data:1 1f 0
[    0.669027]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.669029]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.669532] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.669571] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.669608] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.669644] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.669682] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.669718] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.669755] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.669791] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.669880] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.669882] vgaarb: loaded
[    0.669883] vgaarb: bridge control possible 0000:01:00.0
[    0.670019] SCSI subsystem initialized
[    0.670021] ACPI: bus type scsi registered
[    0.670057] libata version 3.00 loaded.
[    0.670071] ACPI: bus type usb registered
[    0.670084] usbcore: registered new interface driver usbfs
[    0.670091] usbcore: registered new interface driver hub
[    0.670108] usbcore: registered new device driver usb
[    0.670176] PCI: Using ACPI for IRQ routing
[    0.676506] PCI: pci_cache_line_size set to 64 bytes
[    0.676572] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.676574] e820: reserve RAM buffer [mem 0xaf2bf000-0xafffffff]
[    0.676575] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[    0.676576] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
[    0.676646] NetLabel: Initializing
[    0.676648] NetLabel:  domain hash size = 128
[    0.676648] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.676656] NetLabel:  unlabeled traffic allowed by default
[    0.676707] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.676713] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.678723] Switching to clocksource hpet
[    0.683121] AppArmor: AppArmor Filesystem Enabled
[    0.683143] pnp: PnP ACPI init
[    0.683154] ACPI: bus type pnp registered
[    0.683189] pnp 00:00: [dma 4]
[    0.683211] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.683227] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.683313] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.683340] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.683378] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.683380] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.683382] system 00:04: [io  0xffff] has been reserved
[    0.683384] system 00:04: [io  0xffff] has been reserved
[    0.683386] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.683387] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.683389] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.683391] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.683393] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.683414] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.683450] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.683452] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.683488] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.683512] pnp 00:08: Plug and Play ACPI device, IDs SYN2704 SYN2700 SYN0002 PNP0f13 (active)
[    0.683615] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.683617] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.683619] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.683621] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.683623] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.683625] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.683626] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.683628] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.683630] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.683632] system 00:09: [mem 0xc1400000-0xc1400fff] has been reserved
[    0.683635] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.683836] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[    0.683838] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[    0.683840] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.683853] pnp: PnP ACPI: found 11 devices
[    0.683854] ACPI: ACPI bus type pnp unregistered
[    0.689938] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.689940] pci 0000:07:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.689976] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc1500000-0xc15fffff pref]
[    0.689979] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0040000-0xc005ffff pref]
[    0.689982] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.689984] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.689987] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.689989] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.689993] pci 0000:07:00.0: BAR 6: assigned [mem 0xc1500000-0xc150ffff pref]
[    0.689995] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.690000] pci 0000:00:1c.0:   bridge window [mem 0xc1200000-0xc12fffff]
[    0.690004] pci 0000:00:1c.0:   bridge window [mem 0xc1500000-0xc15fffff pref]
[    0.690011] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.690016] pci 0000:00:1c.1:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.690025] pci 0000:00:1c.2: PCI bridge to [bus 09]
[    0.690028] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.690035] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc10fffff 64bit pref]
[    0.690071] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.690073] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.690075] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.690076] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff]
[    0.690078] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.690080] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[    0.690081] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.690083] pci_bus 0000:07: resource 1 [mem 0xc1200000-0xc12fffff]
[    0.690085] pci_bus 0000:07: resource 2 [mem 0xc1500000-0xc15fffff pref]
[    0.690087] pci_bus 0000:08: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.690089] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.690090] pci_bus 0000:09: resource 2 [mem 0xc1000000-0xc10fffff 64bit pref]
[    0.690117] NET: Registered protocol family 2
[    0.690250] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.690379] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.690474] TCP: Hash tables configured (established 32768 bind 32768)
[    0.690494] TCP: reno registered
[    0.690501] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.690519] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.690572] NET: Registered protocol family 1
[    0.722738] pci 0000:01:00.0: Boot video device
[    0.722765] PCI: CLS 64 bytes, default 64
[    0.722829] Trying to unpack rootfs image as initramfs...
[    0.955827] Freeing initrd memory: 15836k freed
[    0.957877] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.957883] software IO TLB [mem 0xab2bc000-0xaf2bc000] (64MB) mapped at [ffff8800ab2bc000-ffff8800af2bbfff]
[    0.957916] Simple Boot Flag at 0x44 set to 0x1
[    0.958263] Initialise module verification
[    0.958308] audit: initializing netlink socket (disabled)
[    0.958322] type=2000 audit(1376230964.904:1): initialized
[    0.983019] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.984130] VFS: Disk quotas dquot_6.5.2
[    0.984164] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.984529] fuse init (API version 7.20)
[    0.984585] msgmni has been set to 7842
[    0.984891] Key type asymmetric registered
[    0.984894] Asymmetric key parser 'x509' registered
[    0.984921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.984942] io scheduler noop registered
[    0.984945] io scheduler deadline registered (default)
[    0.984950] io scheduler cfq registered
[    0.985039] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.985195] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.985206] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.985236] intel_idle: MWAIT substates: 0x21120
[    0.985237] intel_idle: v0.4 model 0x2A
[    0.985238] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.985793] ACPI: AC Adapter [ACAD] (off-line)
[    0.986004] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.986008] ACPI: Power Button [PWRB]
[    0.986133] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.986304] ACPI: Lid Switch [LID0]
[    0.986346] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.986350] ACPI: Power Button [PWRF]
[    0.986422] ACPI: Requesting acpi_cpufreq
[    0.990309] thermal LNXTHERM:00: registered as thermal_zone0
[    0.990311] ACPI: Thermal Zone [THRM] (43 C)
[    0.990347] GHES: HEST is not enabled!
[    0.990447] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.991848] Linux agpgart interface v0.103
[    0.992772] brd: module loaded
[    0.993253] loop: module loaded
[    0.993484] libphy: Fixed MDIO Bus: probed
[    0.993527] tun: Universal TUN/TAP device driver, 1.6
[    0.993528] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.993556] PPP generic driver version 2.4.2
[    0.993582] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.993583] ehci-pci: EHCI PCI platform driver
[    0.993615] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.993618] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.993623] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.993637] ehci-pci 0000:00:1a.0: debug port 2
[    0.997531] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.997552] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1319000
[    1.006335] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.006387] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.006416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.006454] usb usb1: Product: EHCI Host Controller
[    1.006456] usb usb1: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[    1.006457] usb usb1: SerialNumber: 0000:00:1a.0
[    1.006534] hub 1-0:1.0: USB hub found
[    1.006538] hub 1-0:1.0: 2 ports detected
[    1.006634] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.006638] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.006641] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.006653] ehci-pci 0000:00:1d.0: debug port 2
[    1.010543] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.010557] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1318000
[    1.022313] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.022358] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.022363] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.022369] usb usb2: Product: EHCI Host Controller
[    1.022374] usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd
[    1.022378] usb usb2: SerialNumber: 0000:00:1d.0
[    1.022481] hub 2-0:1.0: USB hub found
[    1.022483] hub 2-0:1.0: 2 ports detected
[    1.022561] ehci-platform: EHCI generic platform driver
[    1.022566] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.022576] uhci_hcd: USB Universal Host Controller Interface driver
[    1.022611] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.022614] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.022618] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.022703] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.022745] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.022787] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.022789] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.022790] usb usb3: Product: xHCI Host Controller
[    1.022792] usb usb3: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[    1.022794] usb usb3: SerialNumber: 0000:00:14.0
[    1.022851] xHCI xhci_add_endpoint called for root hub
[    1.022852] xHCI xhci_check_bandwidth called for root hub
[    1.022867] hub 3-0:1.0: USB hub found
[    1.022874] hub 3-0:1.0: 4 ports detected
[    1.023103] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.023106] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.023124] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.023126] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.023128] usb usb4: Product: xHCI Host Controller
[    1.023129] usb usb4: Manufacturer: Linux 3.8.0-27-generic xhci_hcd
[    1.023131] usb usb4: SerialNumber: 0000:00:14.0
[    1.023176] xHCI xhci_add_endpoint called for root hub
[    1.023177] xHCI xhci_check_bandwidth called for root hub
[    1.023190] hub 4-0:1.0: USB hub found
[    1.023197] hub 4-0:1.0: 4 ports detected
[    1.023497] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.026923] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.026929] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.027022] mousedev: PS/2 mouse device common for all mice
[    1.027141] rtc_cmos 00:05: RTC can wake from S4
[    1.027303] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.027364] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.027434] device-mapper: uevent: version 1.0.3
[    1.027481] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    1.027542] cpuidle: using governor ladder
[    1.027616] cpuidle: using governor menu
[    1.027620] ledtrig-cpu: registered to indicate activity on CPUs
[    1.027621] EFI Variables Facility v0.08 2004-May-17
[    1.027758] ashmem: initialized
[    1.027855] TCP: cubic registered
[    1.027926] NET: Registered protocol family 10
[    1.028061] NET: Registered protocol family 17
[    1.028069] Key type dns_resolver registered
[    1.028369] Loading module verification certificates
[    1.029237] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b19078b01b96b975438ce0719f8a7eb15318eb67'
[    1.029246] registered taskstats version 1
[    1.031673] Key type trusted registered
[    1.033189] Key type encrypted registered
[    1.035079] rtc_cmos 00:05: setting system clock to 2013-08-11 14:22:45 UTC (1376230965)
[    1.039897] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.039898] EDD information not available.
[    1.046064] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.071023] ACPI: Battery Slot [BAT1] (battery present)
[    1.072215] Freeing unused kernel memory: 996k freed
[    1.072299] Write protecting the kernel read-only data: 12288k
[    1.074670] Freeing unused kernel memory: 1168k freed
[    1.076818] Freeing unused kernel memory: 1080k freed
[    1.085155] udevd[109]: starting version 175
[    1.110193] rtsx_pci 0000:08:00.0: irq 42 for MSI/MSI-X
[    1.110213] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[    1.115855] Disabling lock debugging due to kernel taint
[    1.116470] ahci 0000:00:1f.2: version 3.0
[    1.116538] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.116574] ahci: SSS flag set, parallel bus scan disabled
[    1.118060] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.118303] r8169 0000:09:00.0: irq 44 for MSI/MSI-X
[    1.118494] r8169 0000:09:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000674000, 30:f9:ed:bc:44:d2, XID 0c900800 IRQ 44
[    1.118498] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.130255] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[    1.130261] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    1.130267] ahci 0000:00:1f.2: setting latency timer to 64
[    1.138730] scsi0 : ahci
[    1.138830] scsi1 : ahci
[    1.139397] scsi2 : ahci
[    1.139455] scsi3 : ahci
[    1.139521] scsi4 : ahci
[    1.139584] scsi5 : ahci
[    1.139652] ata1: SATA max UDMA/133 abar m2048@0xc1317000 port 0xc1317100 irq 43
[    1.139655] ata2: DUMMY
[    1.139656] ata3: DUMMY
[    1.139658] ata4: DUMMY
[    1.139661] ata5: SATA max UDMA/133 abar m2048@0xc1317000 port 0xc1317300 irq 43
[    1.139663] ata6: DUMMY
[    1.318035] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.450190] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.450200] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.450423] hub 1-1:1.0: USB hub found
[    1.450548] hub 1-1:1.0: 6 ports detected
[    1.457790] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.548514] ata1.00: ATA-8: WDC WD6400BPVT-55HXZT3, 01.01A01, max UDMA/133
[    1.548524] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.553748] ata1.00: configured for UDMA/133
[    1.554059] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400BPVT-5 01.0 PQ: 0 ANSI: 5
[    1.554186] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.554205] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.554265] sd 0:0:0:0: [sda] Write Protect is off
[    1.554269] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.554299] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.561711] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.587292]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.587834] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.693882] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.693886] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.694107] hub 2-1:1.0: USB hub found
[    1.694238] hub 2-1:1.0: 6 ports detected
[    1.861339] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[    1.873425] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.875079] ata5.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133
[    1.878301] ata5.00: configured for UDMA/133
[    1.880235] usb 3-4: New USB device found, idVendor=046d, idProduct=c52f
[    1.880245] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.880251] usb 3-4: Product: USB Receiver
[    1.880256] usb 3-4: Manufacturer: Logitech
[    1.880532] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8C0    1.00 PQ: 0 ANSI: 5
[    1.882991] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.882995] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.883105] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.883177] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.889119] usbcore: registered new interface driver usbhid
[    1.889127] usbhid: USB HID core driver
[    1.891408] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input4
[    1.891524] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    1.892738] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input5
[    1.892839] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    1.953132] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[    1.953144] Switching to clocksource tsc
[    1.953439] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.051516] usb 1-1.3: New USB device found, idVendor=05ca, idProduct=18c3
[    2.051526] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.051532] usb 1-1.3: Product: USB2.0 Camera
[    2.051537] usb 1-1.3: Manufacturer: LOEA11P2BF13827507734
[    3.168354] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   11.424226] Adding 4162556k swap on /dev/sda5.  Priority:-1 extents:1 across:4162556k
[   11.666826] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.692667] udevd[392]: starting version 175
[   11.879056] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[   11.881332] lp: driver loaded but no devices found
[   11.885270] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[   11.885278] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.885283] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   11.885287] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.885289] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   11.885293] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.885295] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.890502] cfg80211: Calling CRDA to update world regulatory domain
[   11.898821] mei 0000:00:16.0: setting latency timer to 64
[   11.898880] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[   11.903170] [drm] Initialized drm 1.1.0 20060810
[   11.929358] sony_laptop: Sony Notebook Control Driver v0.6
[   11.929472] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input6
[   11.937871] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[   11.939986] [drm] radeon defaulting to kernel modesetting.
[   11.939990] [drm] radeon kernel modesetting enabled.
[   11.940207] [drm] initializing kernel modesetting (TURKS 0x1002:0x6841 0x104D:0x90AB).
[   11.940237] [drm] register mmio base: 0xC0000000
[   11.940239] [drm] register mmio size: 131072
[   11.940313] ATOM BIOS: THAMES
[   11.940338] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   11.940341] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   11.940346] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
[   11.940348] [drm] Detected VRAM RAM=1024M, BAR=256M
[   11.940349] [drm] RAM width 128bits DDR
[   11.940423] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input7
[   11.940510] [TTM] Zone  kernel: Available graphics memory: 2009420 kiB
[   11.940511] [TTM] Initializing pool allocator
[   11.940516] [TTM] Initializing DMA pool allocator
[   11.940536] [drm] radeon: 1024M of VRAM memory ready
[   11.940538] [drm] radeon: 512M of GTT memory ready.
[   11.940553] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   11.941054] [drm] probing gen 2 caps for device 8086:101 = 2/0
[   11.941060] [drm] PCIE gen 2 link speeds already enabled
[   11.941114] [drm] Loading TURKS Microcode
[   11.947207] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[   11.948998] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[   11.952247] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   11.966556] ath: phy0: ASPM enabled: 0x42
[   11.966560] ath: EEPROM regdomain: 0x65
[   11.966561] ath: EEPROM indicates we should expect a direct regpair map
[   11.966564] ath: Country alpha2 being used: 00
[   11.966566] ath: Regpair used: 0x65
[   11.968472] acpi device:2d: registered as cooling_device4
[   11.968494] ACPI: Video Device [DGPU] (multi-head: yes  rom: no  post: no)
[   11.968658] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input8
[   11.984342] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.984923] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010c00000, irq=16
[   11.986227] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   11.987979] kvm: disabled by bios
[   12.003829] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.003949] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.076608] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[   12.086714] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   12.086829] radeon 0000:01:00.0: WB enabled
[   12.086832] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88013b488c00
[   12.086834] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88013b488c0c
[   12.086835] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.086836] [drm] Driver supports precise vblank timestamp query.
[   12.086875] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[   12.086886] radeon 0000:01:00.0: radeon: using MSI.
[   12.086908] [drm] radeon: irq initialized.
[   12.097266] cfg80211: World regulatory domain updated:
[   12.097269] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.097271] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.097272] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.097273] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.097275] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.097276] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.103168] [drm] ring test on 0 succeeded in 1 usecs
[   12.103226] [drm] ring test on 3 succeeded in 1 usecs
[   12.103422] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.103446] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.159907] [drm] radeon atom DIG backlight initialized
[   12.159917] [drm] Radeon Display Connectors
[   12.159921] [drm] Connector 0:
[   12.159925] [drm]   LVDS-1
[   12.159930] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   12.159933] [drm]   Encoders:
[   12.159936] [drm]     LCD1: INTERNAL_UNIPHY
[   12.159939] [drm] Connector 1:
[   12.159942] [drm]   HDMI-A-1
[   12.159945] [drm]   HPD1
[   12.159950] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   12.159953] [drm]   Encoders:
[   12.159956] [drm]     DFP1: INTERNAL_UNIPHY1
[   12.159959] [drm] Connector 2:
[   12.159962] [drm]   VGA-1
[   12.159966] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   12.159969] [drm]   Encoders:
[   12.159972] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.160067] [drm] Internal thermal controller without fan control
[   12.160933] [drm] radeon: power management initialized
[   12.248689] Linux video capture interface: v2.00
[   12.253824] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05ca:18c3)
[   12.255532] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
[   12.255602] usbcore: registered new interface driver uvcvideo
[   12.255605] USB Video Class driver (1.1.1)
[   12.278557] type=1400 audit(1376220176.755:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=558 comm="apparmor_parser"
[   12.278843] type=1400 audit(1376220176.755:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=664 comm="apparmor_parser"
[   12.278851] type=1400 audit(1376220176.755:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=559 comm="apparmor_parser"
[   12.278857] type=1400 audit(1376220176.755:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=558 comm="apparmor_parser"
[   12.279015] type=1400 audit(1376220176.755:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=558 comm="apparmor_parser"
[   12.279189] type=1400 audit(1376220176.755:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664 comm="apparmor_parser"
[   12.279195] type=1400 audit(1376220176.755:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559 comm="apparmor_parser"
[   12.279382] type=1400 audit(1376220176.755:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=664 comm="apparmor_parser"
[   12.279387] type=1400 audit(1376220176.755:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=559 comm="apparmor_parser"
[   12.560832] [drm] fb mappable at 0xB0142000
[   12.560834] [drm] vram apper at 0xB0000000
[   12.560835] [drm] size 4325376
[   12.560836] [drm] fb depth is 24
[   12.560837] [drm]    pitch is 5632
[   12.560894] fbcon: radeondrmfb (fb0) is primary device
[   12.627010] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 1999, fw id: 1106483
[   12.660240] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[   13.350677] Console: switching to colour frame buffer device 170x48
[   13.352550] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   13.352552] radeon 0000:01:00.0: registered panic notifier
[   13.352563] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[   13.352605] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   13.352679] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   13.358764] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   15.594067] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   16.110749] init: failsafe main process (897) killed by TERM signal
[   16.472291] Bluetooth: Core ver 2.16
[   16.472306] NET: Registered protocol family 31
[   16.472307] Bluetooth: HCI device and connection manager initialized
[   16.472315] Bluetooth: HCI socket layer initialized
[   16.472318] Bluetooth: L2CAP socket layer initialized
[   16.472323] Bluetooth: SCO socket layer initialized
[   16.475575] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.475579] Bluetooth: BNEP filters: protocol multicast
[   16.475587] Bluetooth: BNEP socket layer initialized
[   16.476382] Bluetooth: RFCOMM TTY layer initialized
[   16.476389] Bluetooth: RFCOMM socket layer initialized
[   16.476390] Bluetooth: RFCOMM ver 1.11
[   16.866958] type=1400 audit(1376220181.351:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=984 comm="apparmor_parser"
[   16.968946] init: avahi-cups-reload main process (1012) terminated with status 1
[   17.009665] ppdev: user-space parallel port driver
[   18.229034] init: anacron main process (1069) killed by TERM signal
[   18.245448] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.248619] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.593682] r8169 0000:09:00.0 eth0: link down
[   18.593723] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.593981] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.654308] init: smbd main process (904) killed by HUP signal
[   18.654334] init: smbd main process ended, respawning
[   20.373850] wlan0: authenticate with b0:48:7a:d0:a0:83
[   20.383833] wlan0: send auth to b0:48:7a:d0:a0:83 (try 1/3)
[   20.385791] wlan0: authenticated
[   20.389407] wlan0: associate with b0:48:7a:d0:a0:83 (try 1/3)
[   20.393452] wlan0: RX AssocResp from b0:48:7a:d0:a0:83 (capab=0x431 status=0 aid=5)
[   20.393488] wlan0: associated
[   20.393494] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  101.525779] r8169 0000:09:00.0 eth0: link up
[  101.525798] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2332.473808] systemd-hostnamed[3402]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2885.395306] systemd-hostnamed[3579]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 3325.220841] systemd-hostnamed[3743]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4168.686805] systemd-hostnamed[4175]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4843.632681] systemd-hostnamed[4399]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!


[heartsmagic]

IPV6'yı iptal ettin mi?
Bir de şu dosyanın içeriği nasıl?

Kod Seç Genişlet

cat /etc/hostname

[harzemsah]

ıpv6 ile ilgili bir şey yapmamıştım. dediğiniz dosyanın içeriğini öğrenmek için uç birime mi yazacağım?

[heartsmagic]

Evet uçbirime yazıp çıktıyı buraya geçebilirsin. IPV6 içinse @cokomok'nun verdiği şu bağlantıya bakabilirsin: http://forum.ubuntu-tr.net/index.php?topic=34674.msg417794#msg417794

[harzemsah]

@heartsmagic uçbirime yazdığımda ismim çıkıyor. ıpv6 iptal etme işleminde sudo update-grup yazdığımda aşağıdaki çıktı geliyor.

Kod Seç Genişlet


:~$ sudo update-grub
[sudo] password for:
/usr/sbin/grub-mkconfig: 11: /etc/default/grub: quiet: not found


[heartsmagic]

@harzemsah, kopyala yapıştır işlemlerini yanlış yapmış gibisin sanki. İlginç bir çıktı olmuş açıkçası.