Gönderen Konu: ubuntu 12.04LTS de prof tuners 8000 tv kartı  (Okunma sayısı 4986 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

« : »
arkadaşlar ben linux u kullanmaya 1 kaç gündür karar verdim ve bugün ubuntu 12.04 LTS kurdum kafein ve metv yi yükleme merkezinden indirdim ve kafeine baktığımda kartımın sürücüsünün yüklenmemiş olduğunu gördüm kartımın sürücüsü http://www.proftuners.com/driver8000.html burda verilmiş burdan sonraki aşamalarında yardımcı olursanız memnun olurum

« Yanıtla #1 : »
Sonraki aşamalar için biraz ayrıntı verir misin? Hani kendim bir TV kartı sahibi değilim, tecrübem yok ancak olan arkadaşlar için biraz ayrıntı güzel olur. Kanal tarama aşamalarını vs. mi merak ediyorsun?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

« Yanıtla #2 : »
hayır verdiğim linkteki dosyaların indirilmesi ile ilgili hangiler inecek hangileri nasıl çalıştırılacak burdan gerisi hakkında hiç bilgim yok ve forumlarda da bulamıyorum ekran kartımın sürücüsünü indirdim ve yükledim forumlar yardımı ile ancak prof tuners kartım ile ilgili bilgi bulamıyorum kısacası kartın ubuntuya tanıtılması ve yapılacaklar hakkında yardım istiyorum



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 06 Ağustos 2013 - 21:55:05
birde benim kartın sitesinde kernel 2.6.35 tavsiye edilir demiş benim ubuntu 12.04 kernel kaç

« Yanıtla #3 : »
En azından şu çıktıya bakarak başlayalım:
Kod: [Seç]
lspci

« Yanıtla #4 : »
Kod: [Seç]
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV535 [Radeon X1650 Series]
01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV535 [Radeon X1650 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
05:02.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
05:02.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a)

Düzenleme: #


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 06 Ağustos 2013 - 22:53:52
şimdi farkettimde aslında kartım yüklü daha doğrusu çipseti yüklü conexant olan en alttan 3. ancak ne kaffeinde nede metv de aygıt yok
« Son Düzenleme: 06 Ağustos 2013 - 22:53:52 Gönderen: trtamer »

« Yanıtla #5 : »
Aşağıdaki gibi konuları daha önce incelemiş miyidin ?
http://askubuntu.com/questions/50006/getting-a-conexant-cx23885-tv-capture-card-working


« Yanıtla #6 : »
hayır daha önce bu konuyu görmedim zaten ingilizce pek bişeyde anlamadım ne diyo tam olarak mümkün değilmi diyo hocam



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : [time]06 Ağustos 2013 - 23:00:46[/time]
11.04 de mi çalışıyo diyo


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 06 Ağustos 2013 - 23:26:57
hocam ne oldu yazmıyosun biraz bilgi verirmisin
« Son Düzenleme: 06 Ağustos 2013 - 23:26:57 Gönderen: trtamer »

« Yanıtla #7 : »
Aynı konunun içinden verilen şu bağlantıda ayrıntılı bir anlatım yapılmış:  http://ubuntuforums.org/showthread.php?t=1648472

Çeviri ile kısaca bir gözatabilirsin.

« Yanıtla #8 : »
Alıntı
Linux Drivers for Prof Revolution DVB-S2 8000 PCI-E

Patch v4l-dvb (http://linuxtv.org/hg/v4l-dvb/) for Prof 8000
Recommended kernel: 2.6.35

Installation:
Kod: [Seç]
hg clone http://linuxtv.org/hg/v4l-dvb/
cd v4l-dvb
cat ../prof8000.patch | patch-p1-N
make
sudo make install
hocam burda  cat komutu ile patch yapılmaktan bahsediliyo ama ben komutları tam bilmediğimden yapamıyorum kopyala yapıştır yöntemi ile bikaç varyasyon denedim halledemedim burda çözüm var ama bilgisi olana ve komutları bilene
« Son Düzenleme: 07 Ağustos 2013 - 00:03:27 Gönderen: if »

« Yanıtla #9 : »
@trtamer, imlâya özen gösterirseniz memnun olurum.

Kod: [Seç]
lspci -knn | grep -A2 Multimedia
dmesg | grep firmware
çıktılarına bakayım.

« Yanıtla #10 : »
Kod: [Seç]
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:832f]
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40]
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42]
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a]
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV535 [Radeon X1650 Series] [1002:71c7]
Subsystem: Hightech Information System Ltd. Device [17af:205c]
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Display controller [0380]: Advanced Micro Devices [AMD] nee ATI RV535 [Radeon X1650 Series] [1002:71e7]
Subsystem: Hightech Information System Ltd. Device [17af:205d]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8367]
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: Device [8000:3034]
Kernel driver in use: cx23885
Kernel modules: cx23885
05:02.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 0a)
Subsystem: Creative Labs SBLive! 5.1 Digital Model SB0220 [1102:8065]
Kernel driver in use: snd_emu10k1
Kernel modules: snd-emu10k1
05:02.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 0a)
Subsystem: Creative Labs Gameport Joystick [1102:0020]
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
« Son Düzenleme: 07 Ağustos 2013 - 00:13:08 Gönderen: if »

« Yanıtla #11 : »
Ben de ek olarak sorayım, hiç Kaffeine ile denedin mi kartı çalıştırmayı? Senin bulduğun tarif eski bir çekirdek için. Şu an bu kart için destek gelmiştir belki? Gerçi eski bir kartsa durum nasıldır bilemiyorum. Fakat V4L-DVB derlemeleri için ana kaynak şu:
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers

Belki derlemeye gerek kalmadan kurmanın bir yolu bile vardır, fakat önce doğrudan çalışıp çalışmadığına emin olalım.

Çıktılar için kod etiketini kullanabilirsin: http://kb.ubuntu-tr.net/kodetiketi
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

« Yanıtla #12 : »
Uçbirimden bu komutları sırayla yürüterek çıktılarını aktarır mısın ?:

Kod: [Seç]
sudo apt-get install hgsvn libproc-processtable-perl linux-headers-generic patchutils
Kod: [Seç]
hg clone http://linuxtv.org/hg/v4l-dvb/
Kod: [Seç]
cd v4l-dvb
Kod: [Seç]
cat ../prof8000.patch | patch-p1-N
Kod: [Seç]
make
Kod: [Seç]
sudo make install
Şu adımı ben de geçemedim:
Kod: [Seç]
cat ../prof8000.patch | patch-p1-N

Arch Linux için PKGBUILD oluşturmuşlar, Ubuntu için de bakınmaya devam ediyorum.

« Yanıtla #13 : »
Kod: [Seç]
~/Masaüstü/v4l-dvb$ cat ../prof8000.patch | patch-p1-N
cat: ../prof8000.patch: Böyle bir dosya ya da dizin yok
patch-p1-N: komut bulunamadı
hocam burda cat komutundan sonra http://www.proftuners.com/sites/default/files/prof8000_0.patch
 bu linki bi tıklarmısın sanırım bu linki tıklayınca çıkan kodlar ile ubuntunun içinde cx23885-cards.c isimli bi dosya var bunun içindekilerle değiştirilecek
« Son Düzenleme: 07 Ağustos 2013 - 00:42:34 Gönderen: if »

« Yanıtla #14 : »

« Yanıtla #15 : »
@trtamer, imlâya özen gösterirseniz memnun olurum.

Kod: [Seç]
lspci -knn | grep -A2 Multimedia
dmesg | grep firmware
çıktılarına bakayım.
Kod: [Seç]
[    0.174037] TCP: Hash tables configured (established 131072 bind 65536)
[    0.174039] TCP: reno registered
[    0.174043] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.174053] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.174151] NET: Registered protocol family 1
[    0.174398] pci 0000:01:00.0: Boot video device
[    0.174416] PCI: CLS 32 bytes, default 64
[    0.174876] audit: initializing netlink socket (disabled)
[    0.174888] type=2000 audit(1375824454.168:1): initialized
[    0.197989] highmem bounce pool size: 64 pages
[    0.198001] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.199893] VFS: Disk quotas dquot_6.5.2
[    0.199949] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.200573] fuse init (API version 7.19)
[    0.200660] msgmni has been set to 1690
[    0.200993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.201024] io scheduler noop registered
[    0.201026] io scheduler deadline registered (default)
[    0.201035] io scheduler cfq registered
[    0.201201] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.201292] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.201391] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.201489] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.201576] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.201597] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.201679] intel_idle: does not run on family 6 model 15
[    0.201764] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.201770] ACPI: Power Button [PWRB]
[    0.201821] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.201825] ACPI: Power Button [PWRF]
[    0.201927] ACPI: Requesting acpi_cpufreq
[    0.388447] Freeing initrd memory: 15164k freed
[    0.395521] Monitor-Mwait will be used to enter C-1 state
[    0.395535] Monitor-Mwait will be used to enter C-2 state
[    0.395540] Marking TSC unstable due to TSC halts in idle
[    0.395550] ACPI: acpi_idle registered with cpuidle
[    0.399860] GHES: HEST is not enabled!
[    0.399898] isapnp: Scanning for PnP cards...
[    0.400061] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.420413] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.441822] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.442089] Linux agpgart interface v0.103
[    0.443829] brd: module loaded
[    0.444591] loop: module loaded
[    0.444708] ata_piix 0000:00:1f.2: version 2.13
[    0.444726] ata_piix 0000:00:1f.2: MAP [
[    0.444728]  P0 P2 P1 P3 ]
[    0.444773] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.448038] scsi0 : ata_piix
[    0.448107] scsi1 : ata_piix
[    0.449436] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.449441] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.449463] ata_piix 0000:00:1f.5: MAP [
[    0.449465]  P0 -- P1 -- ]
[    0.449504] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.449786] scsi2 : ata_piix
[    0.449848] scsi3 : ata_piix
[    0.450903] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.450907] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.451247] Fixed MDIO Bus: probed
[    0.451298] tun: Universal TUN/TAP device driver, 1.6
[    0.451300] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.451352] PPP generic driver version 2.4.2
[    0.451397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.451437] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.451441] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.451447] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.451472] ehci_hcd 0000:00:1a.7: debug port 1
[    0.455362] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.455379] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7fe000
[    0.464013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.464037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.464039] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.464042] usb usb1: Product: EHCI Host Controller
[    0.464045] usb usb1: Manufacturer: Linux 3.5.0-37-generic ehci_hcd
[    0.464047] usb usb1: SerialNumber: 0000:00:1a.7
[    0.464160] hub 1-0:1.0: USB hub found
[    0.464166] hub 1-0:1.0: 6 ports detected
[    0.464259] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.464263] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.464268] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.464293] ehci_hcd 0000:00:1d.7: debug port 1
[    0.468183] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.468199] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7fc000
[    0.480014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.480046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.480049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.480052] usb usb2: Product: EHCI Host Controller
[    0.480054] usb usb2: Manufacturer: Linux 3.5.0-37-generic ehci_hcd
[    0.480057] usb usb2: SerialNumber: 0000:00:1d.7
[    0.480154] hub 2-0:1.0: USB hub found
[    0.480158] hub 2-0:1.0: 6 ports detected
[    0.480242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.480266] uhci_hcd: USB Universal Host Controller Interface driver
[    0.480290] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.480294] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.480299] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.480331] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.480363] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.480366] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.480369] usb usb3: Product: UHCI Host Controller
[    0.480371] usb usb3: Manufacturer: Linux 3.5.0-37-generic uhci_hcd
[    0.480374] usb usb3: SerialNumber: 0000:00:1a.0
[    0.480469] hub 3-0:1.0: USB hub found
[    0.480476] hub 3-0:1.0: 2 ports detected
[    0.480550] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.480553] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.480559] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.480592] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.480624] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.480627] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.480630] usb usb4: Product: UHCI Host Controller
[    0.480632] usb usb4: Manufacturer: Linux 3.5.0-37-generic uhci_hcd
[    0.480635] usb usb4: SerialNumber: 0000:00:1a.1
[    0.480738] hub 4-0:1.0: USB hub found
[    0.480742] hub 4-0:1.0: 2 ports detected
[    0.480814] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.480818] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.480823] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.480845] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.480877] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.480880] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.480883] usb usb5: Product: UHCI Host Controller
[    0.480885] usb usb5: Manufacturer: Linux 3.5.0-37-generic uhci_hcd
[    0.480888] usb usb5: SerialNumber: 0000:00:1a.2
[    0.480978] hub 5-0:1.0: USB hub found
[    0.480982] hub 5-0:1.0: 2 ports detected
[    0.481055] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.481059] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.481064] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.481086] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.481116] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.481119] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.481121] usb usb6: Product: UHCI Host Controller
[    0.481124] usb usb6: Manufacturer: Linux 3.5.0-37-generic uhci_hcd
[    0.481126] usb usb6: SerialNumber: 0000:00:1d.0
[    0.481218] hub 6-0:1.0: USB hub found
[    0.481223] hub 6-0:1.0: 2 ports detected
[    0.481296] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.481300] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.481305] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.481327] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.481357] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.481360] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.481362] usb usb7: Product: UHCI Host Controller
[    0.481365] usb usb7: Manufacturer: Linux 3.5.0-37-generic uhci_hcd
[    0.481367] usb usb7: SerialNumber: 0000:00:1d.1
[    0.481458] hub 7-0:1.0: USB hub found
[    0.481462] hub 7-0:1.0: 2 ports detected
[    0.481533] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.481537] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.481542] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.481564] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.481594] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.481597] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.481600] usb usb8: Product: UHCI Host Controller
[    0.481602] usb usb8: Manufacturer: Linux 3.5.0-37-generic uhci_hcd
[    0.481605] usb usb8: SerialNumber: 0000:00:1d.2
[    0.481698] hub 8-0:1.0: USB hub found
[    0.481703] hub 8-0:1.0: 2 ports detected
[    0.481838] usbcore: registered new interface driver libusual
[    0.481897] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.484488] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.484494] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.484605] mousedev: PS/2 mouse device common for all mice
[    0.484730] rtc_cmos 00:03: RTC can wake from S4
[    0.484841] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.484865] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.484925] device-mapper: uevent: version 1.0.3
[    0.484992] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.485013] EISA: Probing bus 0 at eisa.0
[    0.485016] EISA: Cannot allocate resource for mainboard
[    0.485018] Cannot allocate resource for EISA slot 1
[    0.485020] Cannot allocate resource for EISA slot 2
[    0.485021] Cannot allocate resource for EISA slot 3
[    0.485023] Cannot allocate resource for EISA slot 4
[    0.485025] Cannot allocate resource for EISA slot 5
[    0.485027] Cannot allocate resource for EISA slot 6
[    0.485028] Cannot allocate resource for EISA slot 7
[    0.485030] Cannot allocate resource for EISA slot 8
[    0.485032] EISA: Detected 0 cards.
[    0.485073] cpuidle: using governor ladder
[    0.485121] cpuidle: using governor menu
[    0.485123] EFI Variables Facility v0.08 2004-May-17
[    0.485307] ashmem: initialized
[    0.485446] TCP: cubic registered
[    0.485556] NET: Registered protocol family 10
[    0.485750] NET: Registered protocol family 17
[    0.485762] Key type dns_resolver registered
[    0.485838] Using IPI No-Shortcut mode
[    0.485922] PM: Hibernation image not present or could not be loaded.
[    0.485936] registered taskstats version 1
[    0.488274] Key type trusted registered
[    0.490280] Key type encrypted registered
[    0.492728]   Magic number: 9:616:499
[    0.492820] rtc_cmos 00:03: setting system clock to 2013-08-06 21:27:35 UTC (1375824455)
[    0.493285] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.493288] EDD information not available.
[    0.752829] isapnp: No Plug & Play device found
[    0.782642] ata3: SATA *bağlantı down (SStatus 0 SControl 300)
[    0.782666] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[    0.793264] ata4: SATA *bağlantı down (SStatus 0 SControl 300)
[    0.925064] usb 1-3: New USB device found, idVendor=13fd, idProduct=1840
[    0.925070] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.925075] usb 1-3: Product: External       
[    0.925080] usb 1-3: Manufacturer: Generic
[    0.925084] usb 1-3: SerialNumber: 57442D57584E314536314153
[    0.926980] Initializing USB Mass Storage driver...
[    0.927121] scsi4 : usb-storage 1-3:1.0
[    0.927193] usbcore: registered new interface driver usb-storage
[    0.927195] USB Mass Storage support registered.
[    1.260091] ata2.00: SATA *bağlantı up 1.5 Gbps (SStatus 113 SControl 300)
[    1.260108] ata2.01: SATA *bağlantı down (SStatus 0 SControl 300)
[    1.260126] ata2.01: *bağlantı offline, clearing class 3 to NONE
[    1.268148] ata2.00: ATAPI: ATAPI   iHAS124   C, LL06, max UDMA/100
[    1.284145] ata2.00: configured for UDMA/100
[    1.416074] ata1.00: SATA *bağlantı up 1.5 Gbps (SStatus 113 SControl 300)
[    1.416088] ata1.01: SATA *bağlantı down (SStatus 0 SControl 300)
[    1.424363] ata1.00: ATA-7: FUJITSU MHT2060BH, 40000049, max UDMA/100
[    1.424369] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (not used)
[    1.440357] ata1.00: configured for UDMA/100
[    1.440509] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2060B 4000 PQ: 0 ANSI: 5
[    1.440629] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    1.440664] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.440681] sd 0:0:0:0: [sda] Write Protect is off
[    1.440684] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.440706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.532034] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[    1.712133] usb 6-1: New USB device found, idVendor=04a5, idProduct=7008
[    1.712139] usb 6-1: New USB device strings: Mfr=4, Product=20, SerialNumber=0
[    1.712144] usb 6-1: Product: USB Multimedia Keyboard
[    1.712149] usb 6-1: Manufacturer: NOVATEK
[    1.838721]  sda: sda1 sda2 < sda5 >
[    1.839094] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.840355] scsi 1:0:0:0: CD-ROM            ATAPI    iHAS124   C      LL06 PQ: 0 ANSI: 5
[    1.847045] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.847050] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.847186] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.847293] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.847415] Freeing unused kernel memory: 760k freed
[    1.847761] Write protecting the kernel text: 6056k
[    1.847785] Write protecting the kernel read-only data: 2480k
[    1.847787] NX-protecting the kernel data: 4184k
[    1.866749] udevd[105]: starting version 175
[    1.927953] scsi 4:0:0:0: Direct-Access     Generic  External         1.04 PQ: 0 ANSI: 4
[    1.928715] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    1.929200] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.929694] sd 4:0:0:0: [sdb] Write Protect is off
[    1.929698] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    1.929962] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.930071] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[    1.930195] sd 4:0:0:0: [sdb] No Caching mode page present
[    1.930198] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    1.931948] sd 4:0:0:0: [sdb] No Caching mode page present
[    1.931952] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    1.938708] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xf8436000, 90:e6:ba:3b:c7:9c, XID 083000c0 IRQ 44
[    1.938714] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.952082] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[    1.972222] usbcore: registered new interface driver usbhid
[    1.972226] usbhid: USB HID core driver
[    1.972512]  sdb: sdb1
[    1.974577] sd 4:0:0:0: [sdb] No Caching mode page present
[    1.974582] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    1.974586] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.008968] input: NOVATEK USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input2
[    2.009066] hid-generic 0003:04A5:7008.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Multimedia Keyboard] on usb-0000:00:1d.0-1/input0
[    2.019251] input: NOVATEK USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input3
[    2.019357] hid-generic 0003:04A5:7008.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Multimedia Keyboard] on usb-0000:00:1d.0-1/input1
[    2.127619] usb 8-1: New USB device found, idVendor=15d9, idProduct=0a4c
[    2.127627] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.127632] usb 8-1: Product:  USB OPTICAL MOUSE
[    2.145235] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
[    2.145365] hid-generic 0003:15D9:0A4C.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.2-1/input0
[    2.287717] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   22.337327] Adding 2095100k swap on /dev/sda5.  Priority:-1 extents:1 across:2095100k
[   22.343582] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   22.370326] udevd[336]: starting version 175
[   22.446576] lp: driver loaded but no devices found
[   22.449282] Linux video capture interface: v2.00
[   22.469074] [drm] Initialized drm 1.1.0 20060810
[   22.472137] ACPI Warning: 0x00000830-0x00000833 SystemIO conflicts with Region \PMRG 1 (20120320/utaddress-251)
[   22.472148] ACPI Warning: 0x00000830-0x00000833 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMIE 2 (20120320/utaddress-251)
[   22.472153] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.472156] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   22.472159] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMRG 1 (20120320/utaddress-251)
[   22.472164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.472262] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   22.504063] gameport gameport0: EMU10K1 is pci0000:05:02.1/gameport0, io 0xec00, speed 962kHz
[   22.522561] [drm] radeon defaulting to kernel modesetting.
[   22.522566] [drm] radeon kernel modesetting enabled.
[   22.527701] [drm] initializing kernel modesetting (RV530 0x1002:0x71C7 0x17AF:0x205C).
[   22.527732] [drm] register mmio base: 0xFE8E0000
[   22.527734] [drm] register mmio size: 65536
[   22.527855] ATOM BIOS: 113
[   22.527884] [drm] Generation 2 PCI interface, using max accessible memory
[   22.527892] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   22.527895] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   22.532204] [drm] Detected VRAM RAM=512M, BAR=256M
[   22.532209] [drm] RAM width 128bits DDR
[   22.536056] [TTM] Zone  kernel: Available graphics memory: 440694 kiB
[   22.536060] [TTM] Zone highmem: Available graphics memory: 1032314 kiB
[   22.536062] [TTM] Initializing pool allocator
[   22.536068] [TTM] Initializing DMA pool allocator
[   22.536097] [drm] radeon: 512M of VRAM memory ready
[   22.536099] [drm] radeon: 512M of GTT memory ready.
[   22.536128] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   22.538589] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[   22.539708] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   22.602433] radeon 0000:01:00.0: WB enabled
[   22.602440] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000000 and cpu addr 0xffd34000
[   22.602444] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   22.602445] [drm] Driver supports precise vblank timestamp query.
[   22.602490] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[   22.602506] radeon 0000:01:00.0: radeon: using MSI.
[   22.602534] [drm] radeon: irq initialized.
[   22.611789] [drm] Loading R500 Microcode
[   22.614004] parport_pc 00:06: reported by Plug and Play ACPI
[   22.614117] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   22.623646] type=1400 audit(1375824477.626:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=483 comm="apparmor_parser"
[   22.624271] type=1400 audit(1375824477.630:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
[   22.624527] type=1400 audit(1375824477.630:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
[   22.732765] cx23885 driver version 0.0.3 loaded
[   22.732809] cx23885[0]: Your board isn't known (yet) to the driver.
[   22.732809] cx23885[0]: Try to pick one of the existing card configs via
[   22.732809] cx23885[0]: card=<n> insmod option.  Updating to the latest
[   22.732809] cx23885[0]: version might help as well.
[   22.732813] cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
[   22.732815] cx23885[0]:    card=0 -> UNKNOWN/GENERIC
[   22.732817] cx23885[0]:    card=1 -> Hauppauge WinTV-HVR1800lp
[   22.732819] cx23885[0]:    card=2 -> Hauppauge WinTV-HVR1800
[   22.732821] cx23885[0]:    card=3 -> Hauppauge WinTV-HVR1250
[   22.732823] cx23885[0]:    card=4 -> DViCO FusionHDTV5 Express
[   22.732825] cx23885[0]:    card=5 -> Hauppauge WinTV-HVR1500Q
[   22.732827] cx23885[0]:    card=6 -> Hauppauge WinTV-HVR1500
[   22.732828] cx23885[0]:    card=7 -> Hauppauge WinTV-HVR1200
[   22.732830] cx23885[0]:    card=8 -> Hauppauge WinTV-HVR1700
[   22.732832] cx23885[0]:    card=9 -> Hauppauge WinTV-HVR1400
[   22.732834] cx23885[0]:    card=10 -> DViCO FusionHDTV7 Dual Express
[   22.732836] cx23885[0]:    card=11 -> DViCO FusionHDTV DVB-T Dual Express
[   22.732838] cx23885[0]:    card=12 -> Leadtek Winfast PxDVR3200 H
[   22.732840] cx23885[0]:    card=13 -> Compro VideoMate E650F
[   22.732842] cx23885[0]:    card=14 -> TurboSight TBS 6920
[   22.732844] cx23885[0]:    card=15 -> TeVii S470
[   22.732846] cx23885[0]:    card=16 -> DVBWorld DVB-S2 2005
[   22.732848] cx23885[0]:    card=17 -> NetUP Dual DVB-S2 CI
[   22.732849] cx23885[0]:    card=18 -> Hauppauge WinTV-HVR1270
[   22.732851] cx23885[0]:    card=19 -> Hauppauge WinTV-HVR1275
[   22.732853] cx23885[0]:    card=20 -> Hauppauge WinTV-HVR1255
[   22.732855] cx23885[0]:    card=21 -> Hauppauge WinTV-HVR1210
[   22.732857] cx23885[0]:    card=22 -> Mygica X8506 DMB-TH
[   22.732859] cx23885[0]:    card=23 -> Magic-Pro ProHDTV Extreme 2
[   22.732861] cx23885[0]:    card=24 -> Hauppauge WinTV-HVR1850
[   22.732863] cx23885[0]:    card=25 -> Compro VideoMate E800
[   22.732865] cx23885[0]:    card=26 -> Hauppauge WinTV-HVR1290
[   22.732867] cx23885[0]:    card=27 -> Mygica X8558 PRO DMB-TH
[   22.732868] cx23885[0]:    card=28 -> LEADTEK WinFast PxTV1200
[   22.732870] cx23885[0]:    card=29 -> GoTView X5 3D Hybrid
[   22.732872] cx23885[0]:    card=30 -> NetUP Dual DVB-T/C-CI RF
[   22.732874] cx23885[0]:    card=31 -> Leadtek Winfast PxDVR3200 H XC4000
[   22.732876] cx23885[0]:    card=32 -> MPX-885
[   22.732878] cx23885[0]:    card=33 -> Mygica X8507
[   22.732880] cx23885[0]:    card=34 -> TerraTec Cinergy T PCIe Dual
[   22.732881] cx23885[0]:    card=35 -> TeVii S471
[   22.732883] cx23885[0]:    card=36 -> Hauppauge WinTV-HVR1255
[   22.733070] CORE cx23885[0]: subsystem: 8000:3034, board: UNKNOWN/GENERIC [card=0,autodetected]
[   22.771100] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
[   22.835382] lp0: using parport0 (interrupt-driven).
[   22.870205] cx23885_dev_checkrevision() Hardware revision = 0xb0
[   22.870213] cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 17, latency: 0, mmio: 0xfea00000
[   22.891328] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   23.040825] gpio_ich: GPIO from 195 to 255 on gpio_ich
[   23.044802] ppdev: user-space parallel port driver
[   23.121580] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
[   23.124069] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   23.124820] coretemp coretemp.0: Using relative temperature scale!
[   23.124850] coretemp coretemp.0: Using relative temperature scale!
[   23.147943] [drm] radeon: ring at 0x0000000020001000
[   23.147981] [drm] ring test succeeded in 9 usecs
[   23.148263] [drm] ib test succeeded in 0 usecs
[   23.148566] [drm] Radeon Display Connectors
[   23.148569] [drm] Connector 0:
[   23.148571] [drm]   DVI-I-1
[   23.148572] [drm]   HPD2
[   23.148575] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   23.148576] [drm]   Encoders:
[   23.148579] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   23.148580] [drm]     DFP3: INTERNAL_LVTM1
[   23.148582] [drm] Connector 1:
[   23.148584] [drm]   SVIDEO-1
[   23.148585] [drm]   Encoders:
[   23.148587] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[   23.148589] [drm] Connector 2:
[   23.148590] [drm]   DVI-I-2
[   23.148592] [drm]   HPD1
[   23.148594] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   23.148596] [drm]   Encoders:
[   23.148597] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   23.148599] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[   23.218950] [drm] fb mappable at 0xE00C0000
[   23.218953] [drm] vram apper at 0xE0000000
[   23.218955] [drm] size 3145728
[   23.218957] [drm] fb depth is 24
[   23.218958] [drm]    pitch is 4096
[   23.219115] fbcon: radeondrmfb (fb0) is primary device
[   23.219295] Console: switching to colour frame buffer device 128x48
[   23.219324] fb0: radeondrmfb frame buffer device
[   23.219326] drm: registered panic notifier
[   23.219335] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
[   23.308495] init: failsafe main process (736) killed by TERM signal
[   23.472724] Bluetooth: Core ver 2.16
[   23.472783] NET: Registered protocol family 31
[   23.472786] Bluetooth: HCI device and connection manager initialized
[   23.473076] Bluetooth: HCI socket layer initialized
[   23.473081] Bluetooth: L2CAP socket layer initialized
[   23.473089] Bluetooth: SCO socket layer initialized
[   23.487332] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.487338] Bluetooth: BNEP filters: protocol multicast
[   23.500642] type=1400 audit(1375824478.506:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=819 comm="apparmor_parser"
[   23.501216] type=1400 audit(1375824478.506:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=819 comm="apparmor_parser"
[   23.574501] Bluetooth: RFCOMM TTY layer initialized
[   23.574509] Bluetooth: RFCOMM socket layer initialized
[   23.574511] Bluetooth: RFCOMM ver 1.11
[   23.678626] r8169 0000:02:00.0: eth0: *bağlantı down
[   23.678998] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   23.679551] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   23.679821] r8169 0000:02:00.0: eth0: *bağlantı down
[   23.699950] type=1400 audit(1375824478.702:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=858 comm="apparmor_parser"
[   23.700574] type=1400 audit(1375824478.706:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser"
[   23.700592] type=1400 audit(1375824478.706:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=857 comm="apparmor_parser"
[   23.700833] type=1400 audit(1375824478.706:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser"
[   23.700974] type=1400 audit(1375824478.706:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=857 comm="apparmor_parser"
[   25.334428] r8169 0000:02:00.0: eth0: *bağlantı up
[   25.334619] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: *bağlantı becomes ready
[  329.847546] audit_printk_skb: 39 callbacks suppressed
[  329.847553] type=1400 audit(1375824784.850:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=821 comm="cupsd" pid=821 comm="cupsd" capability=36  capname="block_suspend"



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : [time]07 Ağustos 2013, 00:39:39[/time]
if hocam grep komutları herhangi bi çıktı vermedi
« Son Düzenleme: 07 Ağustos 2013 - 00:43:03 Gönderen: if »

« Yanıtla #16 : »
@trtamer, komutları benim verdiğim şekilde girin, kopyala yapıştır yapabilirsiniz.
Kod: [Seç]
sudo moprobe -r cx23885
sudo modprobe cx23885
dmesg | tail -n 40
çıktılarına bakayım.

« Yanıtla #17 : »
patch-p1-N: komut bulunamadı[/code]
 

Arkadaşlar konuyu irdeliyorlar ancak yukarıdaki denemede oluşan hata komutun yanlış uygulanması. Doğrusu şu şekilde:

Kod: [Seç]
patch -p1 -N
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

« Yanıtla #18 : »
@trtamer, komutları benim verdiğim şekilde girin, kopyala yapıştır yapabilirsiniz.
Kod: [Seç]
sudo moprobe -r cx23885
sudo modprobe cx23885
dmesg | tail -n 40
çıktılarına bakayım.
Kod: [Seç]
[   23.275747] [drm]   HPD1
[   23.275749] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   23.275751] [drm]   Encoders:
[   23.275752] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   23.275754] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[   23.350454] [drm] fb mappable at 0xE00C0000
[   23.350459] [drm] vram apper at 0xE0000000
[   23.350461] [drm] size 3145728
[   23.350463] [drm] fb depth is 24
[   23.350464] [drm]    pitch is 4096
[   23.350747] fbcon: radeondrmfb (fb0) is primary device
[   23.351553] Console: switching to colour frame buffer device 128x48
[   23.351586] fb0: radeondrmfb frame buffer device
[   23.351588] drm: registered panic notifier
[   23.351600] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
[   23.378844] init: failsafe main process (719) killed by TERM signal
[   23.479407] Bluetooth: Core ver 2.16
[   23.479436] NET: Registered protocol family 31
[   23.479438] Bluetooth: HCI device and connection manager initialized
[   23.479741] Bluetooth: HCI socket layer initialized
[   23.479744] Bluetooth: L2CAP socket layer initialized
[   23.479751] Bluetooth: SCO socket layer initialized
[   23.482290] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.482295] Bluetooth: BNEP filters: protocol multicast
[   23.552685] type=1400 audit(1375869410.555:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=792 comm="apparmor_parser"
[   23.553298] type=1400 audit(1375869410.555:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=792 comm="apparmor_parser"
[   23.555358] Bluetooth: RFCOMM TTY layer initialized
[   23.555364] Bluetooth: RFCOMM socket layer initialized
[   23.555366] Bluetooth: RFCOMM ver 1.11
[   23.760604] r8169 0000:02:00.0: eth0: *bağlantı down
[   23.760616] r8169 0000:02:00.0: eth0: *bağlantı down
[   23.760820] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   23.761215] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   23.799194] type=1400 audit(1375869410.799:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=843 comm="apparmor_parser"
[   23.800629] type=1400 audit(1375869410.803:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=843 comm="apparmor_parser"
[   23.800886] type=1400 audit(1375869410.803:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=843 comm="apparmor_parser"
[   23.803486] type=1400 audit(1375869410.803:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=842 comm="apparmor_parser"
[   23.803870] type=1400 audit(1375869410.803:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=842 comm="apparmor_parser"
[   25.762830] r8169 0000:02:00.0: eth0: *bağlantı up
[   25.762983] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: *bağlantı becomes ready

hocam sudo lu komutlarda herhangi bi çıktı *vermiyor
« Son Düzenleme: 08 Ağustos 2013 - 23:01:17 Gönderen: if »

« Yanıtla #19 : »
patch-p1-N: komut bulunamadı[/code]
 

Arkadaşlar konuyu irdeliyorlar ancak yukarıdaki denemede oluşan hata komutun yanlış uygulanması. Doğrusu şu şekilde:

Kod: [Seç]
patch -p1 -N

« Yanıtla #20 : »
hocam ilgileriniz için teşekkürler  şu anda en son ki durumumuz nedir çözebildikmi sorunu

« Yanıtla #21 : »
@trtamer, patch komutunun düzeltilmiş şeklini uygulayıp devam ettin mi?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

« Yanıtla #22 : »
evet hocam patch komutunu düzeltilmiş hali ilede denedim ama malesef olmadı aslında yapılacakları tv kartımın sitesindeki dosyaları sizlerin kontrolünde adım adım yapsak belki olacak belki yanlış yaptığım yada eksik yaptığım bişey var belki sistemde güncellemem gereken bi paket var bilemiyorum ilginiz için teşekkürler (linux kullanımına ilk pardus ile başladım en beğendiim sürüm 2008.2 oldu enson 2013 ü de kullandım ancak araştırmalarım sonucu ubuntu 12.04 sürümünü kullandım en çok hoşuma giden bu linux sürümü malesef diğerlerinde de çalıştıramadığım tv kartım yüzünden lünux kullanımından vazgeçicem sanırım

« Yanıtla #23 : »
@trtamer, adım adım da yapılır tabi ama senin tüm çıktıları buraya aktarman lazım. Örneğin son uyguladığın yama, sonra derleme adımlar vs. Öteki türlü senin gözünden kaçan bir şey olur, boşuna uğraşmış olursun.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

« Yanıtla #24 : »
hocam almam gereken çıktılar neler komutları ne hiç bilgim yok yarın temiz bir ubuntu kurucam güncellemelerini yapıcam hiç * bir şey yapmadan forumda tekrar yardım istiycem inşaAllah bu sorunu çözeriz. ilgin için teşekkürler