Pil Düzeyi Hiç Bir Zaman %100 Olmuyor

Başlatan SrdrKcmz, 06 Ağustos 2013 - 02:13:56

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

SrdrKcmz

Asus K56C yeni laptob'umda Linux Mint'in son sürümü bulunmakta. Fakat diz üstü bilgisayarım hiç bir zaman pil seviyesi olarak %100 gösterdiğini görmedim. %93'de kalıyor sabit olarak. Prizden çıkardığımda ise yarım saatte bitiyor. Sadece nete girerek bu zaman dilimi çok az. Hatta bazen açık bırakıyorum Priz takılı olmasına rağmen pil göstergesinin %16 seviyelerinde olduğunu görüyorum. Bu sorun kronik mi yoksa aşılabilir mi?

if

@SrdrKcmz, lspci
dmesg
çıktılarını buraya geçer misiniz?

Sistem açıkken bataryayı çıkartıp tekrar takınca düzeliyor mu?

SrdrKcmz

serdar@SerdarKacmaz ~ $ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation 3rd Gen Core Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 740M] (rev a1)
03:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 0a)


[    1.343878] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.343931] system 00:06: [io  0x0454-0x0457] has been reserved
[    1.343935] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.343986] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    1.343990] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.344020] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.344084] pnp 00:09: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    1.344125] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    1.344332] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.344335] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.344337] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.344339] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.344342] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.344344] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.344347] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.344349] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.344351] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    1.344354] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.344356] system 00:0b: [mem 0xcfe00000-0xcfe00fff] has been reserved
[    1.344359] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.344436] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
[    1.344439] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.344603] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[    1.344606] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
[    1.344608] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.344648] pnp: PnP ACPI: found 14 devices
[    1.344649] ACPI: ACPI bus type pnp unregistered
[    1.350835] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
[    1.350843] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.350845] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.350849] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    1.350852] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.350856] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.350871] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.350877] pci 0000:00:1c.1:   bridge window [mem 0xf7900000-0xf79fffff]
[    1.350889] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.350892] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    1.350898] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
[    1.350903] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    1.350949] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.350952] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.350954] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.350956] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.350958] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.350959] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.350962] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.350964] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
[    1.350966] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    1.350968] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    1.350970] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.350972] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
[    1.350974] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    1.350976] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
[    1.350978] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    1.351008] NET: Registered protocol family 2
[    1.351191] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.351401] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.351546] TCP: Hash tables configured (established 65536 bind 65536)
[    1.351564] TCP: reno registered
[    1.351578] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.351608] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.351676] NET: Registered protocol family 1
[    1.351689] pci 0000:00:02.0: Boot video device
[    1.391522] PCI: CLS 64 bytes, default 64
[    1.391562] Trying to unpack rootfs image as initramfs...
[    1.982480] Freeing initrd memory: 31180k freed
[    1.986721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.986726] software IO TLB [mem 0xba784000-0xbe784000] (64MB) mapped at [ffff8800ba784000-ffff8800be783fff]
[    1.987127] Initialise module verification
[    1.987173] audit: initializing netlink socket (disabled)
[    1.987188] type=2000 audit(1375747901.176:1): initialized
[    2.020161] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.021615] VFS: Disk quotas dquot_6.5.2
[    2.021654] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.022104] fuse init (API version 7.20)
[    2.022178] msgmni has been set to 15738
[    2.022588] Key type asymmetric registered
[    2.022590] Asymmetric key parser 'x509' registered
[    2.022621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.022671] io scheduler noop registered
[    2.022674] io scheduler deadline registered (default)
[    2.022680] io scheduler cfq registered
[    2.022790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[    2.022978] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.022990] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.023044] efifb: probing for efifb
[    2.024133] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a000000, using 3072k, total 3072k
[    2.024135] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    2.024136] efifb: scrolling: redraw
[    2.024138] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.026072] Console: switching to colour frame buffer device 128x48
[    2.027979] fb0: EFI VGA frame buffer device
[    2.027985] intel_idle: MWAIT substates: 0x21120
[    2.027986] intel_idle: v0.4 model 0x3A
[    2.027987] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.028207] ACPI: AC Adapter [AC0] (on-line)
[    2.028310] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.050698] ACPI: Lid Switch [LID]
[    2.050734] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.050739] ACPI: Sleep Button [SLPB]
[    2.050768] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.050770] ACPI: Power Button [PWRF]
[    2.050859] ACPI: Requesting acpi_cpufreq
[    2.156381] thermal LNXTHERM:00: registered as thermal_zone0
[    2.156384] ACPI: Thermal Zone [THRM] (62 C)
[    2.156410] GHES: HEST is not enabled!
[    2.156478] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.158427] Linux agpgart interface v0.103
[    2.159774] brd: module loaded
[    2.160486] loop: module loaded
[    2.160763] libphy: Fixed MDIO Bus: probed
[    2.160817] tun: Universal TUN/TAP device driver, 1.6
[    2.160818] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.160890] PPP generic driver version 2.4.2
[    2.160938] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.160940] ehci-pci: EHCI PCI platform driver
[    2.160986] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    2.160991] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.160996] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.161012] ehci-pci 0000:00:1a.0: debug port 2
[    2.164919] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.164936] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a20000
[    2.174481] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.174513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.174516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.174520] usb usb1: Product: EHCI Host Controller
[    2.174523] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[    2.174526] usb usb1: SerialNumber: 0000:00:1a.0
[    2.174638] hub 1-0:1.0: USB hub found
[    2.174643] hub 1-0:1.0: 2 ports detected
[    2.174732] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    2.174736] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.174740] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.174755] ehci-pci 0000:00:1d.0: debug port 2
[    2.178635] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.178651] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1f000
[    2.190438] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.190469] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.190471] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.190473] usb usb2: Product: EHCI Host Controller
[    2.190475] usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[    2.190476] usb usb2: SerialNumber: 0000:00:1d.0
[    2.190655] hub 2-0:1.0: USB hub found
[    2.190658] hub 2-0:1.0: 2 ports detected
[    2.190720] ehci-platform: EHCI generic platform driver
[    2.190727] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.190740] uhci_hcd: USB Universal Host Controller Interface driver
[    2.190800] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    2.190803] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.190808] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.190898] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.190946] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[    2.190993] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.190995] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.190997] usb usb3: Product: xHCI Host Controller
[    2.190999] usb usb3: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
[    2.191000] usb usb3: SerialNumber: 0000:00:14.0
[    2.191061] xHCI xhci_add_endpoint called for root hub
[    2.191063] xHCI xhci_check_bandwidth called for root hub
[    2.191079] hub 3-0:1.0: USB hub found
[    2.191087] hub 3-0:1.0: 4 ports detected
[    2.191155] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.191159] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.191179] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.191181] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.191183] usb usb4: Product: xHCI Host Controller
[    2.191185] usb usb4: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
[    2.191186] usb usb4: SerialNumber: 0000:00:14.0
[    2.191236] xHCI xhci_add_endpoint called for root hub
[    2.191237] xHCI xhci_check_bandwidth called for root hub
[    2.191253] hub 4-0:1.0: USB hub found
[    2.191260] hub 4-0:1.0: 4 ports detected
[    2.191431] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.193499] i8042: Detected active multiplexing controller, rev 1.1
[    2.194444] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.194449] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.194471] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.194486] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.194501] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.194610] mousedev: PS/2 mouse device common for all mice
[    2.194761] rtc_cmos 00:05: RTC can wake from S4
[    2.194884] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.194915] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.194993] device-mapper: uevent: version 1.0.3
[    2.195051] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    2.195140] cpuidle: using governor ladder
[    2.195235] cpuidle: using governor menu
[    2.195238] ledtrig-cpu: registered to indicate activity on CPUs
[    2.195239] EFI Variables Facility v0.08 2004-May-17
[    2.198214] ashmem: initialized
[    2.198327] TCP: cubic registered
[    2.198435] NET: Registered protocol family 10
[    2.198588] NET: Registered protocol family 17
[    2.198597] Key type dns_resolver registered
[    2.198836] Loading module verification certificates
[    2.199820] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d490763cc418e29de79f40a5aa7d97747ec8882c'
[    2.199831] registered taskstats version 1
[    2.202300] Key type trusted registered
[    2.204390] Key type encrypted registered
[    2.206866] rtc_cmos 00:05: setting system clock to 2013-08-06 00:11:42 UTC (1375747902)
[    2.207569] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.207571] EDD information not available.
[    2.238371] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.310787] ACPI: Battery Slot [BAT0] (battery present)
[    2.311888] Freeing unused kernel memory: 992k freed
[    2.311982] Write protecting the kernel read-only data: 12288k
[    2.314267] Freeing unused kernel memory: 1176k freed
[    2.316373] Freeing unused kernel memory: 1080k freed
[    2.325986] udevd[110]: starting version 175
[    2.353789] [drm] Initialized drm 1.1.0 20060810
[    2.356624] Disabling lock debugging due to kernel taint
[    2.359892] wmi: Mapper loaded
[    2.371316] [drm] Memory usable by graphics device = 2048M
[    2.371321] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    2.371323] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    2.371337] Console: switching to colour dummy device 80x25
[    2.371497] i915 0000:00:02.0: setting latency timer to 64
[    2.377723] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.377984] r8169 0000:04:00.2: irq 44 for MSI/MSI-X
[    2.389303] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc900040ac000, 74:d0:2b:10:a1:6f, XID 08800800 IRQ 44
[    2.389307] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.389477] rtsx_pci 0000:04:00.0: irq 45 for MSI/MSI-X
[    2.389492] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
[    2.392787] MXM: GUID detected in BIOS
[    2.392831] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880223247f78 (20121018/exresop-590)
[    2.392836] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
[    2.392840] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88022347ab68), AE_AML_OPERAND_TYPE (20121018/psparse-537)
[    2.392851] failed to evaluate _DSM: 12291
[    2.392931] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.GFX0 handle
[    2.445118] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    2.445125] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.445126] [drm] Driver supports precise vblank timestamp query.
[    2.445183] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.506121] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.638561] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.638572] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.638952] hub 1-1:1.0: USB hub found
[    2.639127] hub 1-1:1.0: 6 ports detected
[    2.661069] fbcon: inteldrmfb (fb0) is primary device
[    2.749808] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.881993] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.881998] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.882360] hub 2-1:1.0: USB hub found
[    2.882435] hub 2-1:1.0: 6 ports detected
[    2.985497] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    2.985500] Switching to clocksource tsc
[    3.049416] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    3.098422] usb 3-2: New USB device found, idVendor=0480, idProduct=b001
[    3.098427] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    3.098430] usb 3-2: Product: STOR.E PARTNER
[    3.098433] usb 3-2: Manufacturer: TOSHIBA
[    3.098436] usb 3-2: SerialNumber: 201111080D38
[    3.100614] Initializing USB Mass Storage driver...
[    3.100690] scsi0 : usb-storage 3-2:1.0
[    3.100753] usbcore: registered new interface driver usb-storage
[    3.100753] USB Mass Storage support registered.
[    3.265136] usb 3-3: new full-speed USB device number 3 using xhci_hcd
[    3.286640] usb 3-3: New USB device found, idVendor=045e, idProduct=0745
[    3.286645] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.286648] usb 3-3: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[    3.286652] usb 3-3: Manufacturer: Microsoft
[    3.303124] usbcore: registered new interface driver usbhid
[    3.303125] usbhid: USB HID core driver
[    3.305502] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input4
[    3.305634] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-3/input0
[    3.305840] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input5
[    3.305918] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-3/input1
[    3.315536] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/input/input6
[    3.315804] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-3/input2
[    3.357131] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    3.451246] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[    3.451251] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.451254] usb 1-1.1: Product: Bluetooth USB Host Controller
[    3.451257] usb 1-1.1: Manufacturer: Atheros Communications
[    3.451260] usb 1-1.1: SerialNumber: Alaska Day 2006
[    3.520816] Console: switching to colour frame buffer device 170x48
[    3.520872] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    3.522523] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.522525] i915 0000:00:02.0: registered panic notifier
[    3.523462] acpi device:05: registered as cooling_device4
[    3.523482] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.523517] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input7
[    3.533386] acpi device:35: registered as cooling_device5
[    3.536832] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.536870] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    3.536939] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.536956] ahci 0000:00:1f.2: version 3.0
[    3.537036] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    3.538065] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e71f0a2
[    3.538068] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[    3.538069] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[    3.541867] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    3.589936] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.589938] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    3.590013] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.590014] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[    3.590020] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    3.590024] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    3.590029] ahci 0000:00:1f.2: setting latency timer to 64
[    3.597259] scsi1 : ahci
[    3.597306] scsi2 : ahci
[    3.597345] scsi3 : ahci
[    3.597385] scsi4 : ahci
[    3.597424] scsi5 : ahci
[    3.597462] scsi6 : ahci
[    3.597487] ata1: SATA max UDMA/133 abar m2048@0xf7a1e000 port 0xf7a1e100 irq 47
[    3.597488] ata2: DUMMY
[    3.597491] ata3: SATA max UDMA/133 abar m2048@0xf7a1e000 port 0xf7a1e200 irq 47
[    3.597492] ata4: DUMMY
[    3.597493] ata5: DUMMY
[    3.597494] ata6: DUMMY
[    3.620950] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    3.714609] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5165
[    3.714621] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.714627] usb 1-1.2: Product: USB Camera
[    3.714631] usb 1-1.2: Manufacturer: Azurewave
[    3.714635] usb 1-1.2: SerialNumber: NULL
[    3.724562] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    3.724565] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[    3.724640] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    3.724642] nouveau  [   VBIOS][0000:01:00.0] version 80.07.a0.00.11
[    3.724854] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[    3.724856] nouveau  [     PFB][0000:01:00.0] RAM size: 1975410688 MiB
[    3.724857] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    3.845004] vga_switcheroo: enabled
[    3.845173] [TTM] Zone  kernel: Available graphics memory: 4030586 kiB
[    3.845175] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.845184] [TTM] Initializing pool allocator
[    3.845189] [TTM] Initializing DMA pool allocator
[    3.845198] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    3.845201] nouveau  [     DRM] VRAM: 1975410688 MiB
[    3.845202] nouveau  [     DRM] GART: 512 MiB
[    3.845204] nouveau  [     DRM] BIT BIOS found
[    3.845206] nouveau  [     DRM] Bios version 80.07.a0.00
[    3.845208] nouveau E[     DRM] Pointer to TMDS table invalid
[    3.845209] nouveau  [     DRM] DCB version 4.0
[    3.845216] [TTM] Finalizing pool allocator
[    3.845227] [TTM] Finalizing DMA pool allocator
[    3.845309] [TTM] Zone  kernel: Used memory at exit: 0 kiB
[    3.845311] [TTM] Zone   dma32: Used memory at exit: 0 kiB
[    3.845313] vga_switcheroo: disabled
[    3.916300] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.916323] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.919200] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.919213] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.921282] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C2 S, 1.00, max UDMA/133
[    3.922746] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.922872] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.922875] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.925906] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.925918] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.927112] ata3.00: configured for UDMA/133
[    3.929370] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/133
[    3.929381] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.935936] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    3.936058] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    3.936061] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.942487] ata1.00: configured for UDMA/133
[    3.942704] scsi 1:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
[    3.942908] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.942914] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    3.942974] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.943037] sd 1:0:0:0: [sda] Write Protect is off
[    3.943042] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.943064] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.944656] scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8C2 S  1.00 PQ: 0 ANSI: 5
[    3.948965] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.948978] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.949183] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    3.949349] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    4.006123]  sda: sda1 sda2 sda3
[    4.006602] sd 1:0:0:0: [sda] Attached SCSI disk
[    4.096687] scsi 0:0:0:0: Direct-Access     TOSHIBA  STOR.E PARTNER   GU00 PQ: 0 ANSI: 5
[    4.097706] sd 0:0:0:0: Attached scsi generic sg2 type 0
[    4.097882] sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.098214] sd 0:0:0:0: [sdb] Write Protect is off
[    4.098218] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    4.098592] sd 0:0:0:0: [sdb] No Caching mode page present
[    4.098600] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    4.099558] sd 0:0:0:0: [sdb] No Caching mode page present
[    4.099564] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    5.086347] xor: automatically using best checksumming function:
[    5.122616]    avx       : 23732.000 MB/sec
[    5.124060] device-mapper: dm-raid45: initialized v0.2594b
[    8.002233]  sdb: sdb1
[    8.035671] sd 0:0:0:0: [sdb] No Caching mode page present
[    8.035674] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    8.035676] sd 0:0:0:0: [sdb] Attached SCSI disk
[    8.277675] Btrfs loaded
[    8.591374] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[    8.591376] EXT4-fs (sda2): write access will be enabled during recovery
[   10.674962] EXT4-fs (sda2): orphan cleanup on readonly fs
[   10.674971] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22290823
[   10.675010] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22282556
[   10.675033] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22290826
[   10.675053] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22290817
[   10.675060] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22290835
[   10.675076] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22285873
[   10.675083] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22290822
[   10.675091] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22283126
[   10.675099] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 19793250
[   10.688545] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 19792097
[   10.688606] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 19791885
[   10.688614] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22290581
[   10.688633] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22289912
[   10.688643] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 30409383
[   10.717989] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 30409393
[   10.718027] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 30409301
[   10.718040] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 30409266
[   10.718064] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 19791890
[   10.738329] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 22288071
[   10.744029] EXT4-fs (sda2): 19 orphan inodes deleted
[   10.744032] EXT4-fs (sda2): recovery complete
[   11.177256] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   25.938304] Adding 8270844k swap on /dev/sda3.  Priority:-1 extents:1 across:8270844k
[   26.363008] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.398837] udevd[516]: starting version 175
[   26.715835] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[   26.723061] lp: driver loaded but no devices found
[   26.732339] Bluetooth: Core ver 2.16
[   26.732357] NET: Registered protocol family 31
[   26.732358] Bluetooth: HCI device and connection manager initialized
[   26.732364] Bluetooth: HCI socket layer initialized
[   26.732367] Bluetooth: L2CAP socket layer initialized
[   26.732371] Bluetooth: SCO socket layer initialized
[   26.734404] usbcore: registered new interface driver btusb
[   26.736860] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPIS 1 (20121018/utaddress-251)
[   26.736866] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 2 (20121018/utaddress-251)
[   26.736870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.736874] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   26.736878] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GP01 2 (20121018/utaddress-251)
[   26.736881] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.736883] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   26.736886] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GP01 2 (20121018/utaddress-251)
[   26.736889] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.736891] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   26.737483] device-mapper: multipath: version 1.5.1 loaded
[   26.746676] cfg80211: Calling CRDA to update world regulatory domain
[   26.749420] mei 0000:00:16.0: setting latency timer to 64
[   26.749487] mei 0000:00:16.0: irq 48 for MSI/MSI-X
[   26.787243] ath: EEPROM regdomain: 0x60
[   26.787247] ath: EEPROM indicates we should expect a direct regpair map
[   26.787250] ath: Country alpha2 being used: 00
[   26.787251] ath: Regpair used: 0x60
[   26.797459] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   26.797706] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc9001ac80000, irq=17
[   26.816722] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   26.827066] asus_wmi: ASUS WMI generic driver loaded
[   26.828254] asus_wmi: Initialization: 0x1asus_wmi: BIOS WMI version: 7.9
[   26.828339] asus_wmi: SFUN value: 0x4a0877<6>[   26.829371] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9
[   26.834532] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   26.834611] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   26.880857] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   26.881911] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   26.882756] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[   26.883602] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   26.920102] asus_wmi: Backlight controlled by ACPI video driver
[   27.039120] usbcore: registered new interface driver ath3k
[   27.214157] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   27.221646] usb 1-1.1: USB disconnect, device number 3
[   27.266440] Linux video capture interface: v2.00
[   27.273164] uvcvideo: Found UVC 1.00 device USB Camera (13d3:5165)
[   27.284325] input: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12
[   27.284392] usbcore: registered new interface driver uvcvideo
[   27.284394] USB Video Class driver (1.1.1)
[   27.417924] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[   27.511769] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[   27.511780] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   27.511786] usb 1-1.1: Product: Bluetooth USB Host Controller
[   27.511791] usb 1-1.1: Manufacturer: Atheros Communications
[   27.511795] usb 1-1.1: SerialNumber: Alaska Day 2006
[   27.558820] cfg80211: World regulatory domain updated:
[   27.558823] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.558824] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.558825] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.558826] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.558827] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.558828] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.710764] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[   27.724007] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[   27.786435] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[   29.985513] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   30.247231] init: failsafe main process (1062) killed by TERM signal
[   30.996084] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.996088] Bluetooth: BNEP filters: protocol multicast
[   30.996095] Bluetooth: BNEP socket layer initialized
[   30.996482] Bluetooth: RFCOMM TTY layer initialized
[   30.996488] Bluetooth: RFCOMM socket layer initialized
[   30.996489] Bluetooth: RFCOMM ver 1.11
[   32.170964] init: avahi-cups-reload main process (1191) terminated with status 1
[   32.543032] ppdev: user-space parallel port driver
[   33.427829] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.430835] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   33.824361] r8169 0000:04:00.2 eth0: link down
[   33.824400] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.824667] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   34.687025] init: smbd main process (1081) killed by HUP signal
[   34.687044] init: smbd main process ended, respawning
[   35.847653] wlan0: authenticate with 80:1f:02:28:77:38
[   35.856366] wlan0: send auth to 80:1f:02:28:77:38 (try 1/3)
[   35.858339] wlan0: authenticated
[   35.858454] ath9k 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   35.858897] wlan0: associate with 80:1f:02:28:77:38 (try 1/3)
[   35.863550] wlan0: RX AssocResp from 80:1f:02:28:77:38 (capab=0x411 status=0 aid=1)
[   35.863594] wlan0: associated
[   35.863601] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   68.193368] EXT4-fs (sdb1): recovery complete
[   68.193839] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

if


SrdrKcmz

#4
BUnblebee kurulumuna neden ihtiyaç duyuyoruz ki.. Yani Ekran kartı çok iyi çalışıyor. Bozmayalım sistemi baştan.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ağustos 2013 - 01:16:45

Valla kusura bakma ama iyi halt ettik yani. Bilgisayar çıldırdı resmen. Açılıp 5 dakka sonra fazla ısınmaktan kapanıyor. Wiki de anlatıldığı gibi kurdum kurmaz olaydım...

UykusuzBizon

Sorun Bumblebee kurulumunda mı? Bilen arkadaşlar cevaplayana kadar sakin olmanızda fayda var.Bumblebee'yi deposuyla beraber kaldırmaya yarayan komutlar mevcut. Kaldırmaya gerek kalmadan çözülebilir belki sorununuz biraz bekleyelim. http://forum.ubuntu-tr.net/index.php?topic=35668.0

Bağlantı bir kenarda dursun daha iyi bilen birileri yardımcı olacaktır size.
Beni doyurmuyor ne para ne sistemin masalı.

heartsmagic

@SrdrKcmz, kurulum çıktılarını, nihai çıktıları geçmeden sana nasıl yardımcı olabiliriz ki? Kusura bakmayız zira bizler sadece yardım için buradayız. Önerileri kabul etmek, denemek elbette kullanıcıların kendi inisiyatifinde olan bir durum. Öneriden sonra sorun mu yaşandı? Yine yardımcı olmaya çalışırız.

Kısacası kurulum aşamaları, çıktılar vs. lazım bizlere. Yok istemem diyorsan da @StewieGriffin'in söylediği üzere kurduğun şeyi kaldırman da mümkün.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

SrdrKcmz

Reset attım. Bilgisayar deli gibi çalışıyordu. Fazla ısınmadan kapandı. Tekrar reset attığımda eski haline döndü ama bu sefer Dizüstü Pil simgesi gözükmüyordu. Sürekli takılı olan Şarjı çıkardığımda prizden bilgisayar otomatik kapandı. Sanki Pil yokmuş gibi. Masaüstü gibi çalıştırıyorum şu an bilgisayarımı. Prizi çıkardığımda bilgisayar kapanıyor. Şu an da sağ alt köşede Pil durumu %97 gösteriyor. Bu arada Bumblebee wikiden kurdum ve ordaki yönergeleri uyguladım sadece. Bumblebee kaldırma gibi bir işlem yapmadım şu an. Kendi kendine bir haller oldu bilgisayara.

arpia


glxspheres
optirun glxspheres

çıktıları ne diyor?

Ayrıca o pilin ömrü bitmiş olmasın. Kaç zamandır aynı pili kullanıyorsunuz?

SrdrKcmz

#9
serdar@SerdarKacmaz ~ $ glxspheres
Polygons in scene: 62464
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Ivybridge Mobile
60.401369 frames/sec - 53.626751 Mpixels/sec

serdar@SerdarKacmaz ~ $ optirun glxspheres
[28393.526041] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[28393.526078] [ERROR]Aborting because fallback start is disabled.



Bilgisayarımı alalı 1 ay oluyor. Pilin ömrünün bitmesi mümkün değil.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ağustos 2013 - 10:34:55

Alıntı yapılan: arpia - 07 Ağustos 2013 - 10:05:30

glxspheres
optirun glxspheres

çıktıları ne diyor?

Ayrıca o pilin ömrü bitmiş olmasın. Kaç zamandır aynı pili kullanıyorsunuz?


Dediklerinizi yaptıktan sonra bilgisayar tekrar çıldırmaya başladı.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ağustos 2013 - 10:51:14

Neyse 3 reset den sonra bilgisayar kendine geldi. Sorun nedir acaba. Bu arada Pili çıkarıp yavaşça tekrar taktım. Temassızlık olsa gerek şu anda pille çalışıyor. Dediğiniz kodları konsola yazdığımda resmen bilgisayar çıldırıyor. Fan kısmından ateş çıkaracak neredeyse o kadar ısınıyor yani.

arpia

Bumblebee düzgün çalışmıyor.


lspci | grep VGA

çıktısını görebilirmiyiz?

Kurulumu aşağıda ki gibi mi yaptınız?

sudo add-apt-repository ppa:bumblebee/stable
sudo apt-get update
sudo apt-get install bumblebee bumblebee-nvidia

SrdrKcmz

Kurulumu Wiki de anlatılanlar gibi yaptım. Ek bir işlem uygulamadım.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ağustos 2013 - 10:58:56

serdar@SerdarKacmaz ~ $ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)





Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 07 Ağustos 2013 - 10:59:54

http://wiki.ubuntu-tr.net/index.php/Bumblebee

arpia

#12
Bumblebee'ye gerek yok, zira sizde optimus yok. Tek ekran kartı var.

Bumblebee kaldırabilirsiniz.

Kaldırdıtan sonra tekrar bakalım.





Pardon lspci çıktısı vermişsiniz daha önce,
Alıntı Yap
3D controller: NVIDIA Corporation GK107M [GeForce GT 740M] (rev a1)
Tam olarak anlamadım ne yazık ki. Görünürde bir NVIDIA var.

SrdrKcmz


furkankalkan

acpi -a çıktısını alabilir miyiz ? Bir de kernel açılış parametrelerinden noacpi yi deneyebilirsiniz.
Lover
twitter.com/furkan_kalkan1

if

Alıntı yapılan: heartsmagic - 07 Ağustos 2013 - 05:07:22
@SrdrKcmz, kurulum çıktılarını, nihai çıktıları geçmeden sana nasıl yardımcı olabiliriz ki? Kusura bakmayız zira bizler sadece yardım için buradayız. Önerileri kabul etmek, denemek elbette kullanıcıların kendi inisiyatifinde olan bir durum. Öneriden sonra sorun mu yaşandı? Yine yardımcı olmaya çalışırız.

SrdrKcmz

[serdarkacmaz@localhost ~]$ acpi -a
Adapter 0: on-line