kablouz bağlantıyı aktif eden düğme yazılımı

[silifkem]

ubuntuyu yeni kurdum. kablosuz bağlantı yapabilmek için bilgisayarda bir düğme var. o düğmeyi aktif etmek için gerekli yazılımı bir türlü bulamadım. bilgisayarın markası Queen

bilgiler şu şekilde:

Kod Seç Genişlet

cat /etc/lsb-release

Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=13.04
DISTRIB_CODENAME=raring
DISTRIB_DESCRIPTION="Ubuntu 13.04"
hilmiev@hilmiev-LM2W:~$


Kod Seç Genişlet


hilmiev@hilmiev-LM2W:~$ uname -a
Linux hilmiev-LM2W 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:19:42 UTC 2013 i686 i686 i686 GNU/Linux
hilmiev@hilmiev-LM2W:~$

Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 04)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:01.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
06:07.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:07.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:07.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:07.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:09.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
hilmiev@hilmiev-LM2W:~$


Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ lsusb
Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
hilmiev@hilmiev-LM2W:~$

Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
hilmiev@hilmiev-LM2W:~$

Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ sudo lshw -C network
[sudo] password for hilmiev:
  *-network:0 ETKİSİZLEŞTİRİLDİ
       açıklama: Kablosuz arayüz
       ürün: PRO/Wireless 2915ABG [Calexico2] Network Connection
       üretici: Intel Corporation
       physical id: 1
       bus info: pci@0000:06:01.0
       mantıksal ad: eth1
       sürüm: 05
       serial: 00:12:f0:54:2f:79
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=ipw2200 driverversion=1.2.2kmprq firmware=ABG:9.0.5.27 (Dec 12 2007) latency=32 *bağlantı=no maxlatency=24 mingnt=3 multicast=yes wireless=IEEE 802.11abg
       kaynaklar: irq:18 bellek:b0008000-b0008fff
  *-network:1
       açıklama: Eternet interface
       ürün: BCM4401-B0 100Base-TX
       üretici: Broadcom Corporation
       physical id: 9
       bus info: pci@0000:06:09.0
       mantıksal ad: eth0
       sürüm: 02
       serial: 00:40:ca:d7:7a:8d
       boyut: 100Mbit/s
       kapasite: 100Mbit/s
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm bus_master cap_list rom eternet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.2.6 latency=32 *bağlantı=yes multicast=yes port=twisted pair speed=100Mbit/s
       kaynaklar: irq:18 bellek:b0006000-b0007fff bellek:44000000-4401ffff
hilmiev@hilmiev-LM2W:~$
hilmiev@hilmiev-LM2W:~$

Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ ifconfig
eth0      *bağlantı encap:Ethernet  HWaddr 00:40:ca:d7:7a:8d 
          inet addr:192.168.2.6  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::240:caff:fed7:7a8d/64 Scope:*bağlantı
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3052 errors:0 dropped:1 overruns:0 frame:0
          TX packets:2169 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1319588 (1.3 MB)  TX bytes:276861 (276.8 KB)
          Interrupt:18

lo        *bağlantı encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:556 errors:0 dropped:0 overruns:0 frame:0
          TX packets:556 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:59736 (59.7 KB)  TX bytes:59736 (59.7 KB)


Kod Seç Genişlet

ilmiev@hilmiev-LM2W:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      IEEE 802.11abg  ESSID:off/any 
          Mode:Managed  Channel:0  Access Point: Not-Associated   
          Bit Rate:0 kb/s   Tx-Power=off   Sensitivity=8/0 
          Retry limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          *bağlantı Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ iwlist scanning
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      No scan results

Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ lsmod
Module                  Size  Used by
parport_pc             27504  0
ppdev                  12817  0
rfcomm                 37420  0
bnep                   17669  2
bluetooth             202069  10 bnep,rfcomm
binfmt_misc            17260  1
snd_hda_codec_si3054    12864  1
snd_hda_codec_realtek    63791  1
pcmcia                 39544  0
snd_hda_intel          38307  3
snd_hda_codec         117580  3 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel
snd_hwdep              13272  1 snd_hda_codec
snd_pcm                80890  3 snd_hda_codec_si3054,snd_hda_codec,snd_hda_intel
ipw2200               140461  0
snd_page_alloc         14230  2 snd_pcm,snd_hda_intel
snd_seq_midi           13132  0
snd_seq_midi_event     14475  1 snd_seq_midi
libipw                 33170  1 ipw2200
i915                  535507  3
snd_rawmidi            25114  1 snd_seq_midi
lib80211               14040  2 libipw,ipw2200
drm_kms_helper         47545  1 i915
tifm_7xx1              12905  0
joydev                 17097  0
yenta_socket           27095  0
snd_seq                51280  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
tifm_core              15068  1 tifm_7xx1
video                  18894  1 i915
pcmcia_rsrc            18191  1 yenta_socket
cfg80211              436177  2 libipw,ipw2200
snd_timer              24411  2 snd_pcm,snd_seq
drm                   228750  4 i915,drm_kms_helper
pcmcia_core            21505  3 pcmcia,pcmcia_rsrc,yenta_socket
mac_hid                13037  0
lpc_ich                16925  0
snd                    56485  16 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device
i2c_algo_bit           13197  1 i915
psmouse                81038  0
microcode              18286  0
serio_raw              13031  0
soundcore              12600  1 snd
lp                     13299  0
parport                40753  3 lp,ppdev,parport_pc
hid_generic            12484  0
usbhid                 41805  0
hid                    82666  2 hid_generic,usbhid
b44                    31137  0
firewire_ohci          35292  0
sdhci_pci              18158  0
firewire_core          61718  1 firewire_ohci
sdhci                  31824  1 sdhci_pci
ssb                    50628  1 b44
crc_itu_t              12627  1 firewire_core

Kod Seç Genişlet

[    0.160071] pci 0000:06:07.0:   bridge window [io  0x6000-0x60ff]
[    0.160078] pci 0000:06:07.0:   bridge window [io  0x6400-0x64ff]
[    0.160085] pci 0000:06:07.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.160091] pci 0000:06:07.0:   bridge window [mem 0x4c000000-0x4fffffff]
[    0.160098] pci 0000:00:1e.0: PCI bridge to [bus 06-10]
[    0.160102] pci 0000:00:1e.0:   bridge window [io  0x6000-0x6fff]
[    0.160109] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.160115] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x45ffffff pref]
[    0.160181] pci 0000:00:1e.0: setting latency timer to 64
[    0.160194] pci 0000:06:07.0: setting latency timer to 64
[    0.160200] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.160203] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.160206] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.160209] pci_bus 0000:02: resource 1 [mem 0xa4000000-0xa7ffffff]
[    0.160213] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
[    0.160216] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.160219] pci_bus 0000:03: resource 1 [mem 0xa8000000-0xabffffff]
[    0.160222] pci_bus 0000:03: resource 2 [mem 0xb4000000-0xb7ffffff 64bit pref]
[    0.160225] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.160228] pci_bus 0000:04: resource 1 [mem 0xac000000-0xafffffff]
[    0.160231] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
[    0.160234] pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
[    0.160237] pci_bus 0000:05: resource 1 [mem 0x46000000-0x461fffff]
[    0.160240] pci_bus 0000:05: resource 2 [mem 0x46200000-0x463fffff 64bit pref]
[    0.160244] pci_bus 0000:06: resource 0 [io  0x6000-0x6fff]
[    0.160246] pci_bus 0000:06: resource 1 [mem 0xb0000000-0xb00fffff]
[    0.160250] pci_bus 0000:06: resource 2 [mem 0x40000000-0x45ffffff pref]
[    0.160252] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.160255] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.160259] pci_bus 0000:07: resource 0 [io  0x6000-0x60ff]
[    0.160262] pci_bus 0000:07: resource 1 [io  0x6400-0x64ff]
[    0.160265] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.160268] pci_bus 0000:07: resource 3 [mem 0x4c000000-0x4fffffff]
[    0.160320] NET: Registered protocol family 2
[    0.160527] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.160585] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.160635] TCP: Hash tables configured (established 8192 bind 8192)
[    0.160675] TCP: reno registered
[    0.160679] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.160695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.160782] NET: Registered protocol family 1
[    0.160803] pci 0000:00:02.0: Boot video device
[    0.160989] PCI: CLS 32 bytes, default 64
[    0.161060] Trying to unpack rootfs image as initramfs...
[    0.548683] Freeing initrd memory: 15616k freed
[    0.561592] Simple Boot Flag at 0x36 set to 0x1
[    0.561930] Initialise module verification
[    0.561997] audit: initializing netlink socket (disabled)
[    0.562019] type=2000 audit(1375196181.560:1): initialized
[    0.587828] bounce pool size: 64 pages
[    0.587849] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.589907] VFS: Disk quotas dquot_6.5.2
[    0.589971] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.590713] fuse init (API version 7.20)
[    0.590813] msgmni has been set to 1739
[    0.591188] Key type asymmetric registered
[    0.591191] Asymmetric key parser 'x509' registered
[    0.591237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.591268] io scheduler noop registered
[    0.591270] io scheduler deadline registered (default)
[    0.591280] io scheduler cfq registered
[    0.591496] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.591630] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.591759] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.591891] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.591996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.592039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.592133] intel_idle: does not run on family 6 model 13
[    0.592915] ACPI: AC Adapter [ACAD] (off-line)
[    0.593700] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.594060] ACPI: Lid Switch [LID]
[    0.594109] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.594115] ACPI: Power Button [PWRB]
[    0.594180] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.594184] ACPI: Power Button [PWRF]
[    0.594567] ACPI: Fan [FN1] (off)
[    0.594637] ACPI: Requesting acpi_cpufreq
[    0.594854] tsc: Marking TSC unstable due to TSC halts in idle
[    0.594866] ACPI: acpi_idle registered with cpuidle
[    0.678805] thermal LNXTHERM:00: registered as thermal_zone0
[    0.678809] ACPI: Thermal Zone [THRM] (59 C)
[    0.684036] GHES: HEST is not enabled!
[    0.684161] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.685790] isapnp: Scanning for PnP cards...
[    0.691364] Linux agpgart interface v0.103
[    0.691451] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    0.691514] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.692109] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.696033] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    0.697815] brd: module loaded
[    0.742262] loop: module loaded
[    0.742441] ata_piix 0000:00:1f.2: version 2.13
[    0.742460] ata_piix 0000:00:1f.2: MAP [
[    0.742461]  P0 P2 IDE IDE ]
[    0.747353] ACPI: Battery Slot [BAT0] (battery present)
[    0.921593] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.965470] scsi0 : ata_piix
[    0.965841] scsi1 : ata_piix
[    0.966184] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[    0.966187] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[    0.966695] libphy: Fixed MDIO Bus: probed
[    0.966792] tun: Universal TUN/TAP device driver, 1.6
[    0.966794] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.966836] PPP generic driver version 2.4.2
[    0.966887] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.966889] ehci-pci: EHCI PCI platform driver
[    0.966922] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.966927] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.966934] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.966952] ehci-pci 0000:00:1d.7: debug port 1
[    0.970851] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.970877] ehci-pci 0000:00:1d.7: irq 23, io mem 0xa0004000
[    1.014402] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.014455] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.014459] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.014462] usb usb1: Product: EHCI Host Controller
[    1.014465] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[    1.014467] usb usb1: SerialNumber: 0000:00:1d.7
[    1.014584] hub 1-0:1.0: USB hub found
[    1.014592] hub 1-0:1.0: 8 ports detected
[    1.014776] ehci-platform: EHCI generic platform driver
[    1.014786] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.014809] uhci_hcd: USB Universal Host Controller Interface driver
[    1.014831] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.014836] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.014842] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.014873] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.014912] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.014915] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.014918] usb usb2: Product: UHCI Host Controller
[    1.014921] usb usb2: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[    1.014924] usb usb2: SerialNumber: 0000:00:1d.0
[    1.015037] hub 2-0:1.0: USB hub found
[    1.015042] hub 2-0:1.0: 2 ports detected
[    1.015138] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.015142] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.015148] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.015188] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.015225] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.015228] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.015231] usb usb3: Product: UHCI Host Controller
[    1.015234] usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[    1.015237] usb usb3: SerialNumber: 0000:00:1d.1
[    1.015340] hub 3-0:1.0: USB hub found
[    1.015345] hub 3-0:1.0: 2 ports detected
[    1.015438] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.015443] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.015449] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.015489] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.015528] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.015531] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.015534] usb usb4: Product: UHCI Host Controller
[    1.015537] usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[    1.015540] usb usb4: SerialNumber: 0000:00:1d.2
[    1.015641] hub 4-0:1.0: USB hub found
[    1.015646] hub 4-0:1.0: 2 ports detected
[    1.015741] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.015746] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.015752] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.015792] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.015830] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.015833] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.015836] usb usb5: Product: UHCI Host Controller
[    1.015839] usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[    1.015841] usb usb5: SerialNumber: 0000:00:1d.3
[    1.015954] hub 5-0:1.0: USB hub found
[    1.015959] hub 5-0:1.0: 2 ports detected
[    1.016165] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.060372] isapnp: No Plug & Play device found
[    1.060605] i8042: Detected active multiplexing controller, rev 1.1
[    1.060704] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.060710] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.060739] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.060764] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.060793] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.060907] mousedev: PS/2 mouse device common for all mice
[    1.061080] rtc_cmos 00:05: RTC can wake from S4
[    1.061218] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.061251] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.061372] device-mapper: uevent: version 1.0.3
[    1.061439] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    1.061463] EISA: Probing bus 0 at eisa.0
[    1.061470] Cannot allocate resource for EISA slot 1
[    1.061472] Cannot allocate resource for EISA slot 2
[    1.061475] Cannot allocate resource for EISA slot 3
[    1.061477] Cannot allocate resource for EISA slot 4
[    1.061479] Cannot allocate resource for EISA slot 5
[    1.061481] Cannot allocate resource for EISA slot 6
[    1.061492] EISA: Detected 0 cards.
[    1.061503] cpufreq-nforce2: No nForce2 chipset.
[    1.061532] cpuidle: using governor ladder
[    1.061567] cpuidle: using governor menu
[    1.061570] ledtrig-cpu: registered to indicate activity on CPUs
[    1.061573] EFI Variables Facility v0.08 2004-May-17
[    1.061768] ashmem: initialized
[    1.061915] TCP: cubic registered
[    1.062066] NET: Registered protocol family 10
[    1.062320] NET: Registered protocol family 17
[    1.062333] Key type dns_resolver registered
[    1.062500] Using IPI No-Shortcut mode
[    1.062589] Loading module verification certificates
[    1.068125] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fceb9fd088cf158e29d83343e1c98bf8ab23d94a'
[    1.068146] registered taskstats version 1
[    1.070518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.071086] Key type trusted registered
[    1.073240] Key type encrypted registered
[    1.075811] rtc_cmos 00:05: setting system clock to 2013-07-30 14:56:22 UTC (1375196182)
[    1.076062] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.076064] EDD information not available.
[    1.128331] ata1.00: ATA-7: SAMSUNG HM080JI, YC100-04, max UDMA7
[    1.128335] ata1.00: 156368016 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.132369] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.00, max UDMA/33
[    1.144346] ata1.00: configured for UDMA/133
[    1.144481] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM080JI  YC10 PQ: 0 ANSI: 5
[    1.144708] sd 0:0:0:0: [sda] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.144773] sd 0:0:0:0: [sda] Write Protect is off
[    1.144777] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.144806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.145147] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.148258] ata2.00: configured for UDMA/33
[    1.153386] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4244N 1.00 PQ: 0 ANSI: 5
[    1.158483] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.158486] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.158586] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.158723] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.273463]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.273885] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.273944] Freeing unused kernel memory: 784k freed
[    1.274275] Write protecting the kernel text: 6252k
[    1.274335] Write protecting the kernel read-only data: 2432k
[    1.274337] NX-protecting the kernel data: 3988k
[    1.288164] udevd[94]: starting version 175
[    1.471917] Disabling lock debugging due to kernel taint
[    1.507614] sdhci: Secure Digital Host Controller Interface driver
[    1.507619] sdhci: Copyright(c) Pierre Ossman
[    1.519026] sdhci-pci 0000:06:07.4: SDHCI controller found [104c:8034] (rev 0)
[    1.519081] mmc0: no vqmmc regulator found
[    1.519083] mmc0: no vmmc regulator found
[    1.553112] mmc0: SDHCI controller on PCI [0000:06:07.4] using PIO
[    1.553147] mmc1: no vqmmc regulator found
[    1.553150] mmc1: no vmmc regulator found
[    1.584665] mmc1: SDHCI controller on PCI [0000:06:07.4] using PIO
[    1.584705] mmc2: no vqmmc regulator found
[    1.584707] mmc2: no vmmc regulator found
[    1.616040] mmc2: SDHCI controller on PCI [0000:06:07.4] using PIO
[    1.672087] firewire_ohci 0000:06:07.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.693743] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[    1.693753] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[    1.693760] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[    1.693766] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[    1.712040] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    1.734095] ssb: Sonics Silicon Backplane found on PCI device 0000:06:09.0
[    1.734116] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[    1.753045] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:40:ca:d7:7a:8d
[    1.894268] usb 3-2: New USB device found, idVendor=046d, idProduct=c52f
[    1.894274] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.894277] usb 3-2: Product: USB Receiver
[    1.894280] usb 3-2: Manufacturer: Logitech
[    1.968371] usbcore: registered new interface driver usbhid
[    1.968377] usbhid: USB HID core driver
[    1.988214] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[    1.989543] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[    1.995902] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input5
[    1.996553] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[    2.172118] firewire_core 0000:06:07.2: created device fw0: GUID 0040ca0135000bc0, S400
[    2.672227] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[    2.672232] EXT4-fs (sda6): write access will be enabled during recovery
[    5.613695] EXT4-fs (sda6): recovery complete
[    5.621946] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   21.009557] Adding 1037308k swap on /dev/sda5.  Priority:-1 extents:1 across:1037308k
[   21.194832] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   21.247908] udevd[334]: starting version 175
[   21.768037] lp: driver loaded but no devices found
[   21.791899] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[   21.846433] intel_rng: FWH not detected
[   21.933317] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   21.933327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.933330] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   21.933335] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.933337] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   22.002329] type=1400 audit(1375185403.420:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=464 comm="apparmor_parser"
[   22.002886] type=1400 audit(1375185403.420:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=464 comm="apparmor_parser"
[   22.003202] type=1400 audit(1375185403.420:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=464 comm="apparmor_parser"
[   22.197214] [drm] Initialized drm 1.1.0 20060810
[   22.295485] yenta_cardbus 0000:06:07.0: CardBus bridge found [1509:3750]
[   22.295510] yenta_cardbus 0000:06:07.0: Enabling burst memory read transactions
[   22.295516] yenta_cardbus 0000:06:07.0: Using CSCINT to route CSC interrupts to PCI
[   22.295519] yenta_cardbus 0000:06:07.0: Routing CardBus interrupts to PCI
[   22.295526] yenta_cardbus 0000:06:07.0: TI: mfunc 0x01ac1b22, devctl 0x64
[   22.328193] cfg80211: Calling CRDA to update world regulatory domain
[   22.402874] lib80211: common routines for IEEE802.11 drivers
[   22.402880] lib80211_crypt: registered algorithm 'NULL'
[   22.446010] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   22.476170] libipw: 802.11 data/management/control stack, git-1.1.13
[   22.476175] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   22.490066] i915 0000:00:02.0: setting latency timer to 64
[   22.492064] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   22.492069] [drm] Driver supports precise vblank timestamp query.
[   22.492133] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   22.503062] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   22.503067] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   22.530029] yenta_cardbus 0000:06:07.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   22.530037] yenta_cardbus 0000:06:07.0: Socket status: 30000006
[   22.530045] yenta_cardbus 0000:06:07.0: pcmcia: parent PCI bridge window: [io  0x6000-0x6fff]
[   22.530048] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff:
[   22.531341]  excluding 0x6000-0x60ff 0x6400-0x64ff
[   22.535867] yenta_cardbus 0000:06:07.0: pcmcia: parent PCI bridge window: [mem 0xb0000000-0xb00fffff]
[   22.535871] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0000000-0xb00fffff:
[   22.535875]  excluding 0xb0000000-0xb000ffff
[   22.535889] yenta_cardbus 0000:06:07.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x45ffffff pref]
[   22.535892] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x45ffffff:
[   22.535905]  excluding 0x40000000-0x45ffffff
[   22.552348] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[   22.682122] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   22.683116]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   22.683838] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   22.684240]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   22.684589] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   22.685158]  clean.
[   22.685175] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   22.685803]  clean.
[   22.685823] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   22.685828]  excluding 0xc0000-0xc7fff 0xcc000-0xd3fff 0xdc000-0xfffff
[   22.685856] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   22.685862]  excluding 0xa0000000-0xa00fffff
[   22.685893] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   22.685910]  clean.
[   22.685926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   22.686578]  clean.
[   22.757017] ipw2200: Radio Frequency Kill Switch is On:
[   22.757017] Kill switch must be turned off for wireless networking to work.
[   22.768908] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
[   22.783459] [drm] initialized overlay support
[   22.805295] cfg80211: World regulatory domain updated:
[   22.805301] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.805303] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.805306] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.805308] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.805311] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.805313] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.923215] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
[   22.940277] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
[   23.371538] fbcon: inteldrmfb (fb0) is primary device
[   23.420116] Console: switching to colour frame buffer device 160x50
[   23.424820] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   23.424823] i915 0000:00:02.0: registered panic notifier
[   23.425021] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[   23.425975] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   23.427365] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   23.427502] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   23.520496] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   24.337695] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   25.349308] init: failsafe main process (765) killed by TERM signal
[   25.862801] Bluetooth: Core ver 2.16
[   25.862879] NET: Registered protocol family 31
[   25.862882] Bluetooth: HCI device and connection manager initialized
[   25.863752] Bluetooth: HCI socket layer initialized
[   25.863756] Bluetooth: L2CAP socket layer initialized
[   25.863763] Bluetooth: SCO socket layer initialized
[   25.905551] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.905557] Bluetooth: BNEP filters: protocol multicast
[   25.905570] Bluetooth: BNEP socket layer initialized
[   25.945384] Bluetooth: RFCOMM TTY layer initialized
[   25.945404] Bluetooth: RFCOMM socket layer initialized
[   25.945406] Bluetooth: RFCOMM ver 1.11
[   26.538341] init: avahi-cups-reload main process (824) terminated with status 1
[   26.564882] ppdev: user-space parallel port driver
[   26.595528] type=1400 audit(1375185408.012:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=840 comm="apparmor_parser"
[   26.596405] type=1400 audit(1375185408.016:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=840 comm="apparmor_parser"
[   28.726543] IPv6: ADDRCONF(NETDEV_UP): eth1: *bağlantı is not ready
[   28.733469] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   28.733916] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   29.115691] type=1400 audit(1375185410.532:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=913 comm="apparmor_parser"
[   29.116338] type=1400 audit(1375185410.536:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=913 comm="apparmor_parser"
[   29.122547] type=1400 audit(1375185410.540:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=914 comm="apparmor_parser"
[   29.122989] type=1400 audit(1375185410.540:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=914 comm="apparmor_parser"
[   29.126762] type=1400 audit(1375185410.544:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=915 comm="apparmor_parser"
[   29.127195] type=1400 audit(1375185410.544:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=915 comm="apparmor_parser"
[   29.131265] type=1400 audit(1375185410.548:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=916 comm="apparmor_parser"
[   29.131847] type=1400 audit(1375185410.548:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=916 comm="apparmor_parser"
[   29.132330] type=1400 audit(1375185410.552:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=916 comm="apparmor_parser"
[   29.163713] type=1400 audit(1375185410.580:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=917 comm="apparmor_parser"
[   31.140051] ipw2200: Failed to send POWER_MODE: Command timed out.
[   31.816206] b44 ssb0:0 eth0: *bağlantı is up at 100 Mbps, full duplex
[   31.816213] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[   32.380028] ipw2200: Failed to send POWER_MODE: Command timed out.
[   32.380403] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: *bağlantı becomes ready
[   33.652033] ipw2200: Failed to send POWER_MODE: Command timed out.
[   34.980042] ipw2200: Failed to send POWER_MODE: Command timed out.
[   36.120031] ipw2200: Failed to send POWER_MODE: Command timed out.
[   36.297792] ipw2200: No space for Tx
[   36.297799] ipw2200: Failed to send POWER_MODE: Reason -16
[   45.757395] ipw2200: No space for Tx
[   45.757403] ipw2200: Failed to send POWER_MODE: Reason -16
[  987.349584] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
[  987.349597] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  987.642107] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
[  987.642117] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  987.680460] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
[  987.680469] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  987.718812] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
[  987.718821] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  987.733375] atkbd serio0: Unknown key released (translated set 2, code 0x6d on isa0060/serio0).
[  987.733384] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  988.029128] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
[  988.029137] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  988.120479] atkbd serio0: Unknown key released (translated set 2, code 0x6d on isa0060/serio0).
[  988.120488] atkbd serio0
[code]dmesg | tail
hilmiev@hilmiev-LM2W:~$ dmesg | tail
[  987.680460] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
[  987.680469] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  987.718812] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
[  987.718821] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  987.733375] atkbd serio0: Unknown key released (translated set 2, code 0x6d on isa0060/serio0).
[  987.733384] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  988.029128] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
[  988.029137] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
[  988.120479] atkbd serio0: Unknown key released (translated set 2, code 0x6d on isa0060/serio0).
[  988.120488] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.

evet yok mu bana yardım edecek biri bu forumda? şu kablolardan kurtarın beni artık.

[heartsmagic]

@silifkem, sorununu diğer başlıkta dile getirmişsşin zaten, ikinci bir başlığa gerek yok. Şu an örneğin ben hangi başlığa öneri geçsem diye karmaşa yaşıyorum. Lütfen diğer başlıktan devam etme ve oradaki öneriyi deneyerek sonuçları bu başlıkta paylaş. Böylece tek başlıktan devam etmiş olalım.

[silifkem]

önce bu sayfayı açmıştım. diğer sayfadaki bilgilendirmeleri görünce oraya da yazayım dedim. siz bir yerden yardımcı olun da nerden isterseniz ordan olsun.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Temmuz 2013 - 11:04:29

Kod Seç Genişlet

lspci


Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 04)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:01.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
06:07.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:07.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:07.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:07.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:09.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)

Benim anlamadığım kablosuz internete bağlanabilmem için yukardaki Network bölümü ile mi uğraşmam lazım yoksa Ethernet controller ile mi?

[heartsmagic]

@silifkem, dediğim gibi tek başlıktan devam edelim. Bir başka başlığa daha ileti geçmişsin, sanırım bu başlığı görmeden yaptın onu da. Şu durumda üç farklı yerden sana öneri gelebilir. Eğer gelirse lütfen hepsini bu başlığa çıktı geçerek aktar.

Bilgisayarın markası Queen ise oradan ilerleyemeyiz zira sonuç çıkmaz. Fakat önce lütfen ağ konuları için istediğimiz çıktıların tamamını buraya kod etiketi içinde aktar: kodetiketi
Verilmesi gereken çıktılar: http://forum.ubuntu-tr.net/index.php?topic=28764.0

[silifkem]

@heartsmagic,

@Bir başka başlığa daha ileti geçmişsin, sanırım bu başlığı görmeden yaptın onu da. Şu durumda üç farklı yerden sana öneri gelebilir.

üç farklı yer diye bir şey yok. öneri getiren de yok.
http://forum.ubuntu-tr.net/index.php?topic=29158.0
adresinde  o konudaki aygıt benimkine benzediği için o başlıktan sordum.3. bir başlık yada yorum yok yani.

[heartsmagic]

@silifkem, iddialaşmak gibi bir durum yok ortada ancak üç farklı başlık açtın demedim zaten. Üç farklı yere meramını yazmışsın dedim. Dikkatli bakarsan gönderdiğin iletilere ne demek istediğimi anlarsın. Bu başlık dahil üç farklı yerde iletin var, neyse.

Çıktıları geçerken de ilk iletin üzerinden değil, yeni bir ileti olarak yaparsan farketmiş oluruz. Eğer ilk iletini görmeseydim çıktıları geçmemişsin diyecektim sana. Çıktıları da bundan sonra kod etiketi içinde verirsen okuması kolay olur: kodetiketi

Öneri getirebilmek için ayrıntılar lazım. Meselâ ben Fujitsu başlığında bir öneri getirdim, ancak anlamış olduk ki senin makinen zaten Fujitsu değil. Kısacası önce ayrıntılar, sorun tespiti sonra öneri. Sana yardım etmemiz için de lütfen bu kadar sabırsız olma. Elimizden geleni yaparız, edip edemeyeceğimiz ise kesin değil.

rfkill çıktısında kablosuz arayüzün "donanımsal" olarak kapandığı görülüyor. Bu makine üzerinde kablosuz için bir anahtar yok anladığım kadarıyla öyle mi? Peki kurulu bir Windows var mı makinede?

[silifkem]

@heartsmagic, çıktıları kod etiketi içinde vermeye çalıştım ama yine beceremedim anlaşılan o ki.
makine fujitsu değil ama donanım olarak bizim queen, fujitsu  gibi hemen hemen. Birçok yönden benzer benim anladığım kadarı ile. Mesela  kablosuzu açmak için bir düğme var.  ayrıca windows kurulu. windowsta da kablosuzu açmak için o düğmenin yazılımını kurmazsam çalışmıyor. windows kapandığı zaman o düğme de devre dışı kalıyor. Fn tuşunu da denedim belki bırda o devreye girer diye onunla da olmadı.

[heartsmagic]

Düğme dediğimiz fiziksel bir anahtar değil mi? O anahtarın çalışması için de bir yazılım mı gerekiyor illa ki?

[silifkem]

Evet evet fiziksel bir yazılım. Bilgisayarı açan düğmenin yanında aynen onun gibi. Windowsta düğmenin yazılımını kurmazsak düğme işlevini yapmıyor. düğmenin windows adı ise şu:
Silent Mode&RF On_Off

[heartsmagic]

Yo benim kastım öyle bir şey değildi, o tuşlar bizim tarafta iş görmeyebilir. Benim söylemek istediğim bir "anahtar", onlar genelde daha donanımsal oluyorlar ve bizim tarafta da iş görüyorlar. Şu komutların çıktılarını aktarır mısın buraya:

Kod Seç Genişlet

rfkill unblock all
rfkill list all

[silifkem]

[coderfkill unblock all
rfkill list all][/code]

Kod Seç Genişlet

hilmiev@hilmiev-LM2W:~$ rfkill unblock all
hilmiev@hilmiev-LM2W:~$ rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes

[heartsmagic]

Evet, donanımsal olarak kapalı görünüyor ne yazık ki. Peki Windows tarafında açık mı şu an kablosuz? Eğer değilse o tarafta açıp Ubuntu'ya geçmeyi dene lütfen. 
Bu da işe yaramazsa şu an için bir önerim kalmıyor, biraz daha bakınmak gerekecek ne yazık ki.

[silifkem]

onu denedim daha önce. windows kapanınca o  da kapanıyor.Bekleyip araştırıyorum ben de araştırdıkça yeni bilgiler öğrenmiş oluyoruz bu dünyadan.

[heartsmagic]

Evet doğru yapmışsın, zaten pek ümidim yoktu zira donanımsal olarak kapalı görünüyor.

[arpia]

Aklıma tek gelen şey wine kurup windows üzerinde çalıştırdığınız programı çalıştırmayı denemeniz (Silent Mode&RF On_Off).

[silifkem]

Wine şu bazı programları sanki windows ta gibi kurmaya yarayan ise onu da denedim olmadı. Bir yerde bu aç kapa düğmesinin yazılımı olmalı ki cihaz onu tanıyıp çalışmaya başlasın.

[if]

@silifkem, imlâya özen gösteriniz lütfen.

Kablosuz aygıtı açıp kapatan düşme dışında Fn+bir tuşa basıp açmayı denediniz mi?