Beklemeye aldıktan sonra ekran gelmiyor !

Başlatan lordmacros, 21 Nisan 2013 - 15:53:45

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

lordmacros

21 Nisan 2013 - 15:53:45
arkadaşlar ubuntuyu sorunsuz kullanıyorum. bilgisayarım netbook. bilgisayarı beklemeye alınca (kapağı kapatınca beklemeye alıyor) sorunsuz alıyor. ama açmaya gelince siyah ve hiç ışık olmayan ekranla karşılaşıyor ekran gelmiyor ancak reset atınca geliyor ? bir çözümü varmıdır ?

if

#1
21 Nisan 2013 - 17:30:39
Bilgisayarın marka ve modeli nedir? Ev dizinini şifrelemeyi seçtiniz mi? Bilgisayarı beklemeye almadan önce
Kod Seç
cat /proc/acpi/wakeup > wakeup
 çıktısını buraya geçin. Beklemeye aldıktan sonra kapağı açın > ctrl+alt+f1 > kullanıcı adı + şifre >
Kod Seç
cat /proc/acpi/wakeup > ~/wakeup_sonra.txt komutunu verin. Bilgisayarı yeniden başlatınca wakeup_sonra.txt içeriğini buraya geçin.

lordmacros

#2
21 Nisan 2013 - 19:19:10 Son düzenlenme: 21 Nisan 2013 - 19:35:15 lordmacros
Alıntı yapılan: if - 21 Nisan 2013 - 17:30:39
Bilgisayarın marka ve modeli nedir? Ev dizinini şifrelemeyi seçtiniz mi? Bilgisayarı beklemeye almadan önce
Kod Seç
cat /proc/acpi/wakeup > wakeup
 çıktısını buraya geçin. Beklemeye aldıktan sonra kapağı açın > ctrl+alt+f1 > kullanıcı adı + şifre >
Kod Seç
cat /proc/acpi/wakeup > ~/wakeup_sonra.txt komutunu verin. Bilgisayarı yeniden başlatınca wakeup_sonra.txt içeriğini buraya geçin.

ilk kodun sonuçları

Kod Seç
Device S-state   Status   Sysfs node
EXP1   S4 *disabled  pci:0000:00:1c.0
EXP2   S4 *disabled  pci:0000:00:1c.1
EXP3   S4 *disabled  pci:0000:00:1c.2
PCIB   S3 *disabled  pci:0000:00:1e.0
PWRB   S3 *enabled   
USB1   S3 *enabled   pci:0000:00:1d.0
USB2   S3 *enabled   pci:0000:00:1d.1
USB3   S3 *enabled   pci:0000:00:1d.2
USB4   S3 *enabled   pci:0000:00:1d.3
EUSB   S3 *enabled   pci:0000:00:1d.7

beklemeye aldım tekrar açtım yine siyah ekranda kaldı ctrl alt f1 yaptım bişey olmadı mecburen tekrar restledim.

açtıktan sonra 2.kodun sonuçları

Kod Seç
Device S-state   Status   Sysfs node
EXP1   S4 *disabled  pci:0000:00:1c.0
EXP2   S4 *disabled  pci:0000:00:1c.1
EXP3   S4 *disabled  pci:0000:00:1c.2
PCIB   S3 *disabled  pci:0000:00:1e.0
PWRB   S3 *enabled   
USB1   S3 *enabled   pci:0000:00:1d.0
USB2   S3 *enabled   pci:0000:00:1d.1
USB3   S3 *enabled   pci:0000:00:1d.2
USB4   S3 *enabled   pci:0000:00:1d.3
EUSB   S3 *enabled   pci:0000:00:
bilgisayarımı çok sık beklemeye alan birisiyim eğer bu sorun kalıcı olursa mecburen windowsa dönüş yapacağım ;(
başka bir öneriniz varmı ?

Bu arada sistem özelliklerim

Sistem özellikleri
Netbook Leptop
Windows 7 Enterprise
Üretici: Exper
İşlemci: Intel(R) Atom (TM) CPU N455 @1.66 GHz 1.67 GHz
Ram: 1.00 GB

Ekran kartı özelliklerim:
Kod Seç
Display Devices
---------------
          Card name: Intel(R) Graphics Media Accelerator 3150
       Manufacturer: Intel Corporation
          Chip type: Intel(R) Graphics Media Accelerator 3150
           DAC type: Internal
         Device Key: Enum\PCI\VEN_8086&DEV_A011&SUBSYS_997A1019&REV_00
     Display Memory: 250 MB
   Dedicated Memory: 0 MB
      Shared Memory: 250 MB
       Current Mode: 1024 x 600 (32 bit) (60Hz)
       Monitor Name: Genel PnP Monitör
      Monitor Model: BT101IW03 V.0
         Monitor Id: INL0011
        Native Mode: 1024 x 600(p) (59.994Hz)
        Output Type: Internal
        Driver Name: igdumdx32.dll
Driver File Version: 8.14.0010.2117 (English)
     Driver Version: 8.14.10.2117
        DDI Version: 9Ex
       Driver Model: WDDM 1.0
  Driver Attributes: Final Retail
   Driver Date/Size: 4/19/2010 08:09:08, 536576 bytes
        WHQL Logo'd: n/a
    WHQL Date Stamp: n/a
  Device Identifier: {D7B78E66-E351-11CF-EC7B-70B9A1C2C535}
          Vendor ID: 0x8086
          Device ID: 0xA011
          SubSys ID: 0x997A1019
        Revision ID: 0x0000
Driver Strong Name: oem4.inf:Intel.Mfg:iPNVM0:8.14.10.2117:pci\ven_8086&dev_a011
     Rank Of Driver: 00F42001
        Video Accel: ModeMPEG2_A ModeMPEG2_C

Not
Alıntı YapBeklemeye aldıktan sonra kapağı açın > ctrl+alt+f1

bu kısım olmadı. Çünkü uykudan uyandırdığımda yine hiçbir ekran gelmedi bilgisayar çalışıyor ama ekran gelmiyor (hani bilgisayarı çalıştırırsın ama monitorün düğmesine basmassın ya aynen öyle) belki wakeupsonra dosyası ilkiyle bu yüzden aynı olmuş olabilir.

if

#3
21 Nisan 2013 - 20:09:41
Güç seçeneklerinde ekranı kapattığınızda hangi işlemin yapılması seçili?

lordmacros

#4
21 Nisan 2013 - 22:38:30
Alıntı yapılan: if - 21 Nisan 2013 - 20:09:41
Güç seçeneklerinde ekranı kapattığınızda hangi işlemin yapılması seçili?

askıya al

if

#5
21 Nisan 2013 - 23:02:30
@lordmacros,
Kod Seç
sudo sh -c "sync; echo 1 > /sys/power/pm_trace; pm-suspend" komutundan sonra bilgisayar askıya alınacak. Biraz bekledikten sonra güç düğmesine basarak uyandırmayı deneyin. Bu arada gözünüz disk ışığında olsun. Disk ışığı yanarsa uyanmaya başlıyor demektir. Uyanmazsa güç düşmesinden kapatın bilgisayarı ve tekrar giriş yapın. Giriş yaptıktan sonra
Kod Seç
dmesg > dmesg.txt komutunu verin. Bu komut ardından ev dizini altında oluşan dmesg.txt çıktısını buraya geçin. dmesg komutu için 3 dakika süreniz var. Bu süreyi geçirmemniz gerek.

lordmacros

#6
22 Nisan 2013 - 16:41:00
Alıntı yapılan: if - 21 Nisan 2013 - 23:02:30
@lordmacros,
Kod Seç
sudo sh -c "sync; echo 1 > /sys/power/pm_trace; pm-suspend" komutundan sonra bilgisayar askıya alınacak. Biraz bekledikten sonra güç düğmesine basarak uyandırmayı deneyin. Bu arada gözünüz disk ışığında olsun. Disk ışığı yanarsa uyanmaya başlıyor demektir. Uyanmazsa güç düşmesinden kapatın bilgisayarı ve tekrar giriş yapın. Giriş yaptıktan sonra
Kod Seç
dmesg > dmesg.txt komutunu verin. Bu komut ardından ev dizini altında oluşan dmesg.txt çıktısını buraya geçin. dmesg komutu için 3 dakika süreniz var. Bu süreyi geçirmemniz gerek.

ilk kodu yaptım uykuya aldı. biraz bekledim düğmeye başladım. ama yine ekran gelmedi. Bilgisayar normal çalıştı herzamanki gibi ama yine ekran yok. (disk ışığının gelmesini anlayamadım normal pc kullanırken 3 ışık yanıyor beklemeden sonrada yine 3 ışık yandı)

2.kodun çıktısı

Kod Seç
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f5bffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f5c0000-0x000000003f5cbfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f5cc000-0x000000003f5cefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f5cf000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Exper BilgePC/Intel powered classmate PC, BIOS BPPNV10A.86A.0013.2010.1019.1520 10/19/2010
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f5c0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F600000 mask 0FFE00000 uncachable
[    0.000000]   2 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1014MB, range: 2MB, type UC
[    0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[    0.000000] total RAM covered: 1014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 16M num_reg: 3  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1014MB, range: 2MB, type UC
[    0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000f7d40-0x000f7d4f] mapped at [c00f7d40]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x36330000-0x3718ffff]
[    0.000000] ACPI: RSDP 000f7d10 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 3f5c5369 00074 (v01 Datate Diamond1 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3f5cbc60 000F4 (v03 INTEL           06040000 PTL  00000002)
[    0.000000] ACPI: DSDT 3f5c64ff 056ED (v01  INTEL BEARG31A 06040000 MSFT 03000001)
[    0.000000] ACPI: FACS 3f5cefc0 00040
[    0.000000] ACPI: TCPA 3f5cbd54 00032 (v01 Phoeni  x       06040000  TL  00000000)
[    0.000000] ACPI: MCFG 3f5cbd86 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 3f5cbdc2 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: APIC 3f5cbdfa 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 3f5cbe62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 3f5cbe8a 00176 (v01 Datate Diamond1 06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 3f5c595f 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f5c58b9 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 3f5c53dd 004DC (v02  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 121MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3f5bffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x3f5bffff]
[    0.000000] On node 0 totalpages: 259405
[    0.000000] free_area_init_node: node 0, pgdat c18a0840, node_mem_map f740d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 244 pages used for memmap
[    0.000000]   HighMem zone: 30926 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f73eb000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257377
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=CC7C5B1D7C5B019E loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2076032 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003f5c0)
[    0.000000] Memory: 1001192k/1038080k available (5956k kernel code, 36428k reserved, 2928k data, 756k init, 124680k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18ae000 - 0xc196b000   ( 756 kB)
[    0.000000]       .data : 0xc15d1358 - 0xc18ad6c0   (2928 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15d1358   (5956 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1662.465 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.93 BogoMIPS (lpj=6649860)
[    0.004012] pid_max: default: 32768 minimum: 301
[    0.004064] Security Framework initialized
[    0.004100] AppArmor: AppArmor initialized
[    0.004104] Yama: becoming mindful.
[    0.004215] Mount-cache hash table entries: 512
[    0.004615] Initializing cgroup subsys cpuacct
[    0.004621] Initializing cgroup subsys memory
[    0.004638] Initializing cgroup subsys devices
[    0.004643] Initializing cgroup subsys freezer
[    0.004647] Initializing cgroup subsys blkio
[    0.004652] Initializing cgroup subsys perf_event
[    0.004708] CPU: Physical Processor ID: 0
[    0.004713] CPU: Processor Core ID: 0
[    0.004718] mce: CPU supports 5 MCE banks
[    0.004731] CPU0: Thermal monitoring handled by SMI
[    0.004737] using mwait in idle threads.
[    0.010459] ACPI: Core revision 20120320
[    0.020024] ftrace: allocating 24585 entries in 49 pages
[    0.040108] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.040609] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080328] CPU0: Intel(R) Atom(TM) CPU N455   @ 1.66GHz stepping 0a
[    0.084004] APIC calibration not consistent with PM-Timer: 295ms instead of 100ms
[    0.084004] APIC delta adjusted to PM-Timer: 1039060 (3075591)
[    0.084004] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.084004] ... version:                3
[    0.084004] ... bit width:              40
[    0.084004] ... generic registers:      2
[    0.084004] ... value mask:             000000ffffffffff
[    0.084004] ... max period:             000000007fffffff
[    0.084004] ... fixed-purpose events:   3
[    0.084004] ... event mask:             0000000700000003
[    0.084004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084004] CPU 1 irqstacks, hard=f5ce2000 soft=f5ce4000
[    0.084004] Booting Node   0, Processors  #1 Ok.
[    0.008000] Initializing CPU#1
[    0.008000] CPU0: Thermal monitoring enabled (TM1)
[    0.092140] Brought up 2 CPUs
[    0.092153] Total of 2 processors activated (6649.86 BogoMIPS).
[    0.096160] devtmpfs: initialized
[    0.096432] EVM: security.selinux
[    0.096436] EVM: security.SMACK64
[    0.096439] EVM: security.capability
[    0.096474] PM: Registering ACPI NVS region [mem 0x3f5cc000-0x3f5cefff] (12288 bytes)
[    0.096501] dummy:
[    0.096555] RTC time: 15:35:12, date: 04/22/13
[    0.096645] NET: Registered protocol family 16
[    0.100200] Trying to unpack rootfs image as initramfs...
[    0.100015] EISA bus registered
[    0.100015] ACPI: bus type pci registered
[    0.100015] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[    0.100015] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[    0.100015] PCI: Using MMCONFIG for extended config space
[    0.100015] PCI: Using configuration type 1 for base access
[    0.116269] bio: create slab <bio-0> at 0
[    0.116563] ACPI: Added _OSI(Module Device)
[    0.116571] ACPI: Added _OSI(Processor Device)
[    0.116577] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.116584] ACPI: Added _OSI(Processor Aggregator Device)
[    0.116584] ACPI: EC: Look up EC in DSDT
[    0.127199] ACPI: SSDT 3f5c6228 00203 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.128087] ACPI: Dynamic OEM Table Load:
[    0.128097] ACPI: SSDT   (null) 00203 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.128599] ACPI: SSDT 3f5c5bbe 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.129396] ACPI: Dynamic OEM Table Load:
[    0.129406] ACPI: SSDT   (null) 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.130184] ACPI: SSDT 3f5c642b 000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.131006] ACPI: Dynamic OEM Table Load:
[    0.131016] ACPI: SSDT   (null) 000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.131322] ACPI: SSDT 3f5c61a3 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.132148] ACPI: Dynamic OEM Table Load:
[    0.132159] ACPI: SSDT   (null) 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.140171] ACPI: Interpreter enabled
[    0.140191] ACPI: (supports S0 S1 S3 S4 S5)
[    0.140260] ACPI: Using IOAPIC for interrupt routing
[    0.147419] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.147831] ACPI: No dock devices found.
[    0.147848] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.150208] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20120320/dsfield-143)
[    0.150229] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5c25030), AE_ALREADY_EXISTS (20120320/psparse-536)
[    0.150252] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.150273] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.154388] pci_root PNP0A08:00: >host bridge window [io  0x0000-0x0cf7]
[    0.154401] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
[    0.154410] pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d3fff]
[    0.154419] pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff]
[    0.154427] pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff]
[    0.154436] pci_root PNP0A08:00: >host bridge window [mem 0x000e0000-0x000e3fff]
[    0.154445] pci_root PNP0A08:00: >host bridge window [mem 0x40000000-0xf7ffffff]
[    0.154454] pci_root PNP0A08:00: >host bridge window [io  0x0d00-0xfdff]
[    0.154462] pci_root PNP0A08:00: >host bridge window [mem 0xfed40000-0xfed44fff]
[    0.154602] PCI host bridge to bus 0000:00
[    0.154613] pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
[    0.154622] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[    0.154631] pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d3fff]
[    0.154639] pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d7fff]
[    0.154647] pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000dbfff]
[    0.154655] pci_bus 0000:00: >root bus resource [mem 0x000e0000-0x000e3fff]
[    0.154664] pci_bus 0000:00: >root bus resource [mem 0x40000000-0xf7ffffff]
[    0.154672] pci_bus 0000:00: >root bus resource [io  0x0d00-0xfdff]
[    0.154681] pci_bus 0000:00: >root bus resource [mem 0xfed40000-0xfed44fff]
[    0.154706] pci 0000:00:00.0: >[8086:a010] type 00 class 0x060000
[    0.154787] pci 0000:00:02.0: >[8086:a011] type 00 class 0x030000
[    0.154811] pci 0000:00:02.0: >reg 10: [mem 0xf0200000-0xf027ffff]
[    0.154827] pci 0000:00:02.0: >reg 14: [io  0x18d0-0x18d7]
[    0.154845] pci 0000:00:02.0: >reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.154862] pci 0000:00:02.0: >reg 1c: [mem 0xf0000000-0xf00fffff]
[    0.154933] pci 0000:00:02.1: >[8086:a012] type 00 class 0x038000
[    0.154952] pci 0000:00:02.1: >reg 10: [mem 0xf0280000-0xf02fffff]
[    0.155104] pci 0000:00:1b.0: >[8086:27d8] type 00 class 0x040300
[    0.155142] pci 0000:00:1b.0: >reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[    0.155285] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[    0.155337] pci 0000:00:1c.0: >[8086:27d0] type 01 class 0x060400
[    0.155488] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[    0.155543] pci 0000:00:1c.1: >[8086:27d2] type 01 class 0x060400
[    0.155701] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
[    0.155758] pci 0000:00:1c.2: >[8086:27d4] type 01 class 0x060400
[    0.155909] pci 0000:00:1c.2: >PME# supported from D0 D3hot D3cold
[    0.155968] pci 0000:00:1d.0: >[8086:27c8] type 00 class 0x0c0300
[    0.156079] pci 0000:00:1d.0: >reg 20: [io  0x1820-0x183f]
[    0.156147] pci 0000:00:1d.1: >[8086:27c9] type 00 class 0x0c0300
[    0.156227] pci 0000:00:1d.1: >reg 20: [io  0x1840-0x185f]
[    0.156296] pci 0000:00:1d.2: >[8086:27ca] type 00 class 0x0c0300
[    0.156379] pci 0000:00:1d.2: >reg 20: [io  0x1860-0x187f]
[    0.156451] pci 0000:00:1d.3: >[8086:27cb] type 00 class 0x0c0300
[    0.156530] pci 0000:00:1d.3: >reg 20: [io  0x1880-0x189f]
[    0.156614] pci 0000:00:1d.7: >[8086:27cc] type 00 class 0x0c0320
[    0.156653] pci 0000:00:1d.7: >reg 10: [mem 0xf0504000-0xf05043ff]
[    0.156797] pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
[    0.156840] pci 0000:00:1e.0: >[8086:2448] type 01 class 0x060401
[    0.156982] pci 0000:00:1f.0: >[8086:27bc] type 00 class 0x060100
[    0.157101] pci 0000:00:1f.0: >[Firmware Bug]: TigerPoint LPC.BM_STS cleared
[    0.157187] pci 0000:00:1f.2: >[8086:27c1] type 00 class 0x010601
[    0.157229] pci 0000:00:1f.2: >reg 10: [io  0x18e8-0x18ef]
[    0.157251] pci 0000:00:1f.2: >reg 14: [io  0x18dc-0x18df]
[    0.157273] pci 0000:00:1f.2: >reg 18: [io  0x18e0-0x18e7]
[    0.157295] pci 0000:00:1f.2: >reg 1c: [io  0x18d8-0x18db]
[    0.157316] pci 0000:00:1f.2: >reg 20: [io  0x18c0-0x18cf]
[    0.157338] pci 0000:00:1f.2: >reg 24: [mem 0xf0504400-0xf05047ff]
[    0.157420] pci 0000:00:1f.2: >PME# supported from D3hot
[    0.157459] pci 0000:00:1f.3: >[8086:27da] type 00 class 0x0c0500
[    0.157540] pci 0000:00:1f.3: >reg 20: [io  0x18a0-0x18bf]
[    0.157761] pci 0000:05:00.0: >[10ec:8136] type 00 class 0x020000
[    0.157843] pci 0000:05:00.0: >reg 10: [io  0x2000-0x20ff]
[    0.157973] pci 0000:05:00.0: >reg 18: [mem 0xf0520000-0xf0520fff 64bit pref]
[    0.158057] pci 0000:05:00.0: >reg 20: [mem 0xf0510000-0xf051ffff 64bit pref]
[    0.158113] pci 0000:05:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.158411] pci 0000:05:00.0: >supports D1 D2
[    0.158419] pci 0000:05:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.158629] pci 0000:00:1c.0: >PCI bridge to [bus 05-05]
[    0.158644] pci 0000:00:1c.0: >  bridge window [io  0x2000-0x2fff]
[    0.158665] pci 0000:00:1c.0: >  bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.158794] pci 0000:07:00.0: >[10ec:8172] type 00 class 0x028000
[    0.158832] pci 0000:07:00.0: >reg 10: [io  0x3000-0x30ff]
[    0.158859] pci 0000:07:00.0: >reg 14: [mem 0xf0100000-0xf0103fff]
[    0.159041] pci 0000:07:00.0: >supports D1 D2
[    0.159050] pci 0000:07:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.168086] pci 0000:00:1c.1: >PCI bridge to [bus 07-07]
[    0.168106] pci 0000:00:1c.1: >  bridge window [io  0x3000-0x3fff]
[    0.168119] pci 0000:00:1c.1: >  bridge window [mem 0xf0100000-0xf01fffff]
[    0.168222] pci 0000:00:1c.2: >PCI bridge to [bus 09-09]
[    0.168354] pci 0000:00:1e.0: >PCI bridge to [bus 11-11] (subtractive decode)
[    0.168380] pci 0000:00:1e.0: >  bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.168389] pci 0000:00:1e.0: >  bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.168397] pci 0000:00:1e.0: >  bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.168405] pci 0000:00:1e.0: >  bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.168414] pci 0000:00:1e.0: >  bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.168422] pci 0000:00:1e.0: >  bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.168431] pci 0000:00:1e.0: >  bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[    0.168439] pci 0000:00:1e.0: >  bridge window [io  0x0d00-0xfdff] (subtractive decode)
[    0.168448] pci 0000:00:1e.0: >  bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.168491] pci_bus 0000:00: >on NUMA node 0
[    0.168508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.168771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.168903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.169035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.169154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.169553] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20120320/dsfield-143)
[    0.169573] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5c25030), AE_ALREADY_EXISTS (20120320/psparse-536)
[    0.169608]  pci0000:00: >Requesting ACPI _OSC control (0x1d)
[    0.169806] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20120320/dsfield-143)
[    0.169825] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5c25030), AE_ALREADY_EXISTS (20120320/psparse-536)
[    0.169858]  pci0000:00: >ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
[    0.169863] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.193314] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.193497] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.193663] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.193844] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.194016] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.194189] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.194369] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.194544] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.194904] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.194930] vgaarb: loaded
[    0.194935] vgaarb: bridge control possible 0000:00:02.0
[    0.194935] SCSI subsystem initialized
[    0.196012] libata version 3.00 loaded.
[    0.196012] ACPI: bus type usb registered
[    0.196012] usbcore: registered new interface driver usbfs
[    0.196012] usbcore: registered new interface driver hub
[    0.196012] usbcore: registered new device driver usb
[    0.196012] PCI: Using ACPI for IRQ routing
[    0.196012] PCI: pci_cache_line_size set to 64 bytes
[    0.196012] pci 0000:00:1b.0: >address space collision: [mem 0xf0500000-0xf0503fff 64bit] conflicts with PCI Bus 0000:05 [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.196012] pci 0000:00:1d.7: >address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:05 [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.196012] pci 0000:00:1f.2: >address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:05 [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.196012] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.196012] e820: reserve RAM buffer [mem 0x3f5c0000-0x3fffffff]
[    0.196012] NetLabel: Initializing
[    0.196012] NetLabel:  domain hash size = 128
[    0.196012] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.196012] NetLabel:  unlabeled traffic allowed by default
[    0.196012] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.196012] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.196012] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.205301] Switching to clocksource hpet
[    0.228347] AppArmor: AppArmor Filesystem Enabled
[    0.228417] pnp: PnP ACPI init
[    0.228461] ACPI: bus type pnp registered
[    0.230616] pnp 00:00: >[bus 00-3f]
[    0.230629] pnp 00:00: >[io  0x0cf8-0x0cff]
[    0.230639] pnp 00:00: >[io  0x0000-0x0cf7 window]
[    0.230648] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[    0.230656] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
[    0.230665] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
[    0.230673] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
[    0.230681] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
[    0.230690] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
[    0.230698] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
[    0.230706] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
[    0.230714] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
[    0.230723] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
[    0.230736] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
[    0.230745] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
[    0.230753] pnp 00:00: >[mem 0x000ec000-0x000effff window]
[    0.230761] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
[    0.230770] pnp 00:00: >[mem 0x40000000-0xf7ffffff window]
[    0.230778] pnp 00:00: >[io  0x0d00-0xfdff window]
[    0.230786] pnp 00:00: >[mem 0x00000000 window]
[    0.230794] pnp 00:00: >[mem 0xfed40000-0xfed44fff window]
[    0.230943] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.231295] pnp 00:01: >[io  0x0010-0x001f]
[    0.231305] pnp 00:01: >[io  0x0024-0x0025]
[    0.231313] pnp 00:01: >[io  0x0028-0x0029]
[    0.231320] pnp 00:01: >[io  0x002c-0x002d]
[    0.231328] pnp 00:01: >[io  0x0030-0x0031]
[    0.231336] pnp 00:01: >[io  0x0034-0x0035]
[    0.231343] pnp 00:01: >[io  0x0038-0x0039]
[    0.231351] pnp 00:01: >[io  0x003c-0x003d]
[    0.231358] pnp 00:01: >[io  0x0072-0x0077]
[    0.231366] pnp 00:01: >[io  0x0080]
[    0.231373] pnp 00:01: >[io  0x0090-0x009f]
[    0.231381] pnp 00:01: >[io  0x00a4-0x00a5]
[    0.231389] pnp 00:01: >[io  0x00a8-0x00a9]
[    0.231396] pnp 00:01: >[io  0x00ac-0x00ad]
[    0.231404] pnp 00:01: >[io  0x00b0-0x00b5]
[    0.231411] pnp 00:01: >[io  0x00b8-0x00b9]
[    0.231419] pnp 00:01: >[io  0x00bc-0x00bd]
[    0.231427] pnp 00:01: >[io  0x0800-0x080f]
[    0.231434] pnp 00:01: >[io  0x1000-0x107f]
[    0.231442] pnp 00:01: >[io  0x1180-0x11bf]
[    0.231450] pnp 00:01: >[io  0x002e-0x002f]
[    0.231457] pnp 00:01: >[io  0x04d0-0x04d1]
[    0.231465] pnp 00:01: >[io  0xfe00]
[    0.231472] pnp 00:01: >[io  0x0068-0x0077]
[    0.231480] pnp 00:01: >[io  0x0200-0x020f]
[    0.231488] pnp 00:01: >[mem 0xe0000000-0xefffffff]
[    0.231496] pnp 00:01: >[mem 0xfed14000-0xfed17fff]
[    0.231504] pnp 00:01: >[mem 0xf8000000-0xfbffffff]
[    0.231512] pnp 00:01: >[mem 0xfef00000-0xfeffffff]
[    0.231736] system 00:01: >[io  0x0800-0x080f] has been reserved
[    0.231748] system 00:01: >[io  0x1000-0x107f] has been reserved
[    0.231758] system 00:01: >[io  0x1180-0x11bf] has been reserved
[    0.231768] system 00:01: >[io  0x04d0-0x04d1] has been reserved
[    0.231777] system 00:01: >[io  0xfe00] has been reserved
[    0.231786] system 00:01: >[io  0x0200-0x020f] has been reserved
[    0.231797] system 00:01: >[mem 0xe0000000-0xefffffff] has been reserved
[    0.231807] system 00:01: >[mem 0xfed14000-0xfed17fff] has been reserved
[    0.231817] system 00:01: >[mem 0xf8000000-0xfbffffff] has been reserved
[    0.231826] system 00:01: >[mem 0xfef00000-0xfeffffff] has been reserved
[    0.231839] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.231881] pnp 00:02: >[io  0x0000-0x000f]
[    0.231890] pnp 00:02: >[io  0x0081-0x008f]
[    0.231898] pnp 00:02: >[io  0x00c0-0x00df]
[    0.231906] pnp 00:02: >[dma 4]
[    0.231989] pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
[    0.232074] pnp 00:03: >[io  0x00f0-0x00fe]
[    0.232099] pnp 00:03: >[irq 13]
[    0.232189] pnp 00:03: >Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.232317] pnp 00:04: >[io  0x0070-0x0071]
[    0.232336] pnp 00:04: >[irq 8]
[    0.232427] pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.232534] pnp 00:05: >[io  0x0061]
[    0.232624] pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
[    0.232716] pnp 00:06: >[mem 0xfed40000-0xfed44fff]
[    0.232809] pnp 00:06: >Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[    0.232846] pnp 00:07: >[io  0x0060]
[    0.232861] pnp 00:07: >[io  0x0064]
[    0.232878] pnp 00:07: >[irq 1]
[    0.232969] pnp 00:07: >Plug and Play ACPI device, IDs PNP0303 (active)
[    0.233010] pnp 00:08: >[irq 12]
[    0.233108] pnp 00:08: >Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.233534] pnp 00:09: >[mem 0xff800000-0xffffffff]
[    0.233640] pnp 00:09: >Plug and Play ACPI device, IDs INT0800 (active)
[    0.234275] pnp: PnP ACPI: found 10 devices
[    0.234282] ACPI: ACPI bus type pnp unregistered
[    0.234290] PnPBIOS: Disabled by ACPI PNP
[    0.274811] pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x001fffff] to [bus 05-05] add_size 400000
[    0.274839] pci 0000:00:1c.1: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-07] add_size 200000
[    0.274868] pci 0000:00:1c.2: >bridge window [io  0x1000-0x0fff] to [bus 09-09] add_size 1000
[    0.274888] pci 0000:00:1c.2: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09-09] add_size 200000
[    0.274899] pci 0000:00:1c.2: >bridge window [mem 0x00100000-0x000fffff] to [bus 09-09] add_size 200000
[    0.274937] pci 0000:00:1c.0: >res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[    0.274948] pci 0000:00:1c.1: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.274958] pci 0000:00:1c.2: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.274968] pci 0000:00:1c.2: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.274977] pci 0000:00:1c.2: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.274996] pci 0000:00:1c.0: >BAR 14: assigned [mem 0x40000000-0x404fffff]
[    0.275010] pci 0000:00:1c.1: >BAR 15: assigned [mem 0x40500000-0x406fffff 64bit pref]
[    0.275023] pci 0000:00:1c.2: >BAR 14: assigned [mem 0x40700000-0x408fffff]
[    0.275038] pci 0000:00:1c.2: >BAR 15: assigned [mem 0x40900000-0x40afffff 64bit pref]
[    0.275051] pci 0000:00:1b.0: >BAR 0: assigned [mem 0x40b00000-0x40b03fff 64bit]
[    0.275075] pci 0000:00:1c.2: >BAR 13: assigned [io  0x4000-0x4fff]
[    0.275088] pci 0000:00:1d.7: >BAR 0: assigned [mem 0x40b04000-0x40b043ff]
[    0.275105] pci 0000:00:1f.2: >BAR 5: assigned [mem 0x40b04400-0x40b047ff]
[    0.275124] pci 0000:05:00.0: >BAR 6: assigned [mem 0xf0540000-0xf055ffff pref]
[    0.275133] pci 0000:00:1c.0: >PCI bridge to [bus 05-05]
[    0.275144] pci 0000:00:1c.0: >  bridge window [io  0x2000-0x2fff]
[    0.275157] pci 0000:00:1c.0: >  bridge window [mem 0x40000000-0x404fffff]
[    0.275170] pci 0000:00:1c.0: >  bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.275185] pci 0000:00:1c.1: >PCI bridge to [bus 07-07]
[    0.275194] pci 0000:00:1c.1: >  bridge window [io  0x3000-0x3fff]
[    0.275208] pci 0000:00:1c.1: >  bridge window [mem 0xf0100000-0xf01fffff]
[    0.275220] pci 0000:00:1c.1: >  bridge window [mem 0x40500000-0x406fffff 64bit pref]
[    0.275235] pci 0000:00:1c.2: >PCI bridge to [bus 09-09]
[    0.275244] pci 0000:00:1c.2: >  bridge window [io  0x4000-0x4fff]
[    0.275257] pci 0000:00:1c.2: >  bridge window [mem 0x40700000-0x408fffff]
[    0.275269] pci 0000:00:1c.2: >  bridge window [mem 0x40900000-0x40afffff 64bit pref]
[    0.275284] pci 0000:00:1e.0: >PCI bridge to [bus 11-11]
[    0.275377] pci 0000:00:1c.2: >enabling device (0000 -> 0003)
[    0.275411] pci 0000:00:1e.0: >setting latency timer to 64
[    0.275423] pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
[    0.275431] pci_bus 0000:00: >resource 5 [mem 0x000a0000-0x000bffff]
[    0.275439] pci_bus 0000:00: >resource 6 [mem 0x000d0000-0x000d3fff]
[    0.275447] pci_bus 0000:00: >resource 7 [mem 0x000d4000-0x000d7fff]
[    0.275455] pci_bus 0000:00: >resource 8 [mem 0x000d8000-0x000dbfff]
[    0.275464] pci_bus 0000:00: >resource 9 [mem 0x000e0000-0x000e3fff]
[    0.275472] pci_bus 0000:00: >resource 10 [mem 0x40000000-0xf7ffffff]
[    0.275480] pci_bus 0000:00: >resource 11 [io  0x0d00-0xfdff]
[    0.275489] pci_bus 0000:00: >resource 12 [mem 0xfed40000-0xfed44fff]
[    0.275497] pci_bus 0000:05: >resource 0 [io  0x2000-0x2fff]
[    0.275505] pci_bus 0000:05: >resource 1 [mem 0x40000000-0x404fffff]
[    0.275514] pci_bus 0000:05: >resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.275522] pci_bus 0000:07: >resource 0 [io  0x3000-0x3fff]
[    0.275530] pci_bus 0000:07: >resource 1 [mem 0xf0100000-0xf01fffff]
[    0.275539] pci_bus 0000:07: >resource 2 [mem 0x40500000-0x406fffff 64bit pref]
[    0.275547] pci_bus 0000:09: >resource 0 [io  0x4000-0x4fff]
[    0.275555] pci_bus 0000:09: >resource 1 [mem 0x40700000-0x408fffff]
[    0.275564] pci_bus 0000:09: >resource 2 [mem 0x40900000-0x40afffff 64bit pref]
[    0.275573] pci_bus 0000:11: >resource 4 [io  0x0000-0x0cf7]
[    0.275581] pci_bus 0000:11: >resource 5 [mem 0x000a0000-0x000bffff]
[    0.275589] pci_bus 0000:11: >resource 6 [mem 0x000d0000-0x000d3fff]
[    0.275597] pci_bus 0000:11: >resource 7 [mem 0x000d4000-0x000d7fff]
[    0.275605] pci_bus 0000:11: >resource 8 [mem 0x000d8000-0x000dbfff]
[    0.275613] pci_bus 0000:11: >resource 9 [mem 0x000e0000-0x000e3fff]
[    0.275621] pci_bus 0000:11: >resource 10 [mem 0x40000000-0xf7ffffff]
[    0.275629] pci_bus 0000:11: >resource 11 [io  0x0d00-0xfdff]
[    0.275638] pci_bus 0000:11: >resource 12 [mem 0xfed40000-0xfed44fff]
[    0.275733] NET: Registered protocol family 2
[    0.275892] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.276281] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.277334] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.277849] TCP: Hash tables configured (established 131072 bind 65536)
[    0.277859] TCP: reno registered
[    0.277872] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.277894] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.278098] NET: Registered protocol family 1
[    0.278144] pci 0000:00:02.0: >Boot video device
[    0.278457] PCI: CLS 32 bytes, default 64
[    0.278626] Simple Boot Flag at 0x36 set to 0x1
[    0.279616] audit: initializing netlink socket (disabled)
[    0.279646] type=2000 audit(1366644911.272:1): initialized
[    0.334688] highmem bounce pool size: 64 pages
[    0.334723] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.340106] VFS: Disk quotas dquot_6.5.2
[    0.340272] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.342056] fuse init (API version 7.19)
[    0.342331] msgmni has been set to 1711
[    0.343384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.343495] io scheduler noop registered
[    0.343503] io scheduler deadline registered (default)
[    0.343529] io scheduler cfq registered
[    0.343910] pcieport 0000:00:1c.0: >irq 40 for MSI/MSI-X
[    0.344174] pcieport 0000:00:1c.1: >irq 41 for MSI/MSI-X
[    0.344399] pcieport 0000:00:1c.2: >irq 42 for MSI/MSI-X
[    0.344619] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.344686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.344859] intel_idle: MWAIT substates: 0x20220
[    0.344876] intel_idle: v0.4 model 0x1C
[    0.344881] intel_idle: lapic_timer_reliable_states 0x2
[    0.344887] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.345680] ACPI: AC Adapter [AC0] (off-line)
[    0.345900] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input0
[    0.345951] ACPI: Lid Switch [LID]
[    0.346080] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input1
[    0.346092] ACPI: Power Button [PWRB]
[    0.346221] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.346232] ACPI: Sleep Button [SLPB]
[    0.346359] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.346369] ACPI: Power Button [PWRF]
[    0.346569] ACPI: Requesting acpi_cpufreq
[    0.758497] Freeing initrd memory: 14720k freed
[    0.782084] thermal LNXTHERM:00: >registered as thermal_zone0
[    0.782091] ACPI: Thermal Zone [TZ01] (58 C)
[    0.782145] ACPI: Battery Slot [BAT1] (battery present)
[    0.782210] GHES: HEST is not enabled!
[    0.782339] isapnp: Scanning for PnP cards...
[    0.782420] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.788401] Linux agpgart interface v0.103
[    0.788581] agpgart-intel 0000:00:00.0: >Intel GMA3150 Chipset
[    0.788727] agpgart-intel 0000:00:00.0: >detected gtt size: 524288K total, 262144K mappable
[    0.788918] agpgart-intel 0000:00:00.0: >detected 8192K stolen memory
[    0.789143] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xd0000000
[    0.793500] brd: module loaded
[    0.795784] loop: module loaded
[    0.796153] ahci 0000:00:1f.2: >version 3.0
[    0.796276] ahci 0000:00:1f.2: >irq 43 for MSI/MSI-X
[    0.796415] ahci 0000:00:1f.2: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    0.796426] ahci 0000:00:1f.2: >flags: 64bit ncq pm led clo pio slum part
[    0.796437] ahci 0000:00:1f.2: >setting latency timer to 64
[    0.797832] scsi0 : ahci
[    0.798069] scsi1 : ahci
[    0.798242] scsi2 : ahci
[    0.798417] scsi3 : ahci
[    0.798789] ata1: SATA max UDMA/133 abar m1024@0x40b04400 port 0x40b04500 irq 43
[    0.798797] ata2: SATA max UDMA/133 abar m1024@0x40b04400 port 0x40b04580 irq 43
[    0.798805] ata3: SATA max UDMA/133 abar m1024@0x40b04400 port 0x40b04600 irq 43
[    0.798812] ata4: SATA max UDMA/133 abar m1024@0x40b04400 port 0x40b04680 irq 43
[    0.799782] Fixed MDIO Bus: probed
[    0.799927] tun: Universal TUN/TAP device driver, 1.6
[    0.799931] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.800115] PPP generic driver version 2.4.2
[    0.800232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.800331] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[    0.800341] ehci_hcd 0000:00:1d.7: >EHCI Host Controller
[    0.800363] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 1
[    0.800401] ehci_hcd 0000:00:1d.7: >using broken periodic workaround
[    0.800422] ehci_hcd 0000:00:1d.7: >debug port 1
[    0.804313] ehci_hcd 0000:00:1d.7: >cache line size of 32 is not supported
[    0.804363] ehci_hcd 0000:00:1d.7: >irq 23, io mem 0x40b04000
[    0.816042] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
[    0.816124] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.816132] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.816140] usb usb1: >Product: EHCI Host Controller
[    0.816147] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.816153] usb usb1: >SerialNumber: 0000:00:1d.7
[    0.816471] hub 1-0:1.0: >USB hub found
[    0.816485] hub 1-0:1.0: >8 ports detected
[    0.816687] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.816743] uhci_hcd: USB Universal Host Controller Interface driver
[    0.816805] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[    0.816814] uhci_hcd 0000:00:1d.0: >UHCI Host Controller
[    0.816830] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
[    0.816875] uhci_hcd 0000:00:1d.0: >irq 23, io base 0x00001820
[    0.816962] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.816970] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.816978] usb usb2: >Product: UHCI Host Controller
[    0.816985] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.816991] usb usb2: >SerialNumber: 0000:00:1d.0
[    0.817260] hub 2-0:1.0: >USB hub found
[    0.817273] hub 2-0:1.0: >2 ports detected
[    0.817442] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[    0.817452] uhci_hcd 0000:00:1d.1: >UHCI Host Controller
[    0.817467] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 3
[    0.817529] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x00001840
[    0.817621] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.817630] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.817637] usb usb3: >Product: UHCI Host Controller
[    0.817644] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.817650] usb usb3: >SerialNumber: 0000:00:1d.1
[    0.817913] hub 3-0:1.0: >USB hub found
[    0.817926] hub 3-0:1.0: >2 ports detected
[    0.818094] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[    0.818104] uhci_hcd 0000:00:1d.2: >UHCI Host Controller
[    0.818119] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 4
[    0.818179] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x00001860
[    0.818263] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.818272] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.818279] usb usb4: >Product: UHCI Host Controller
[    0.818286] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.818293] usb usb4: >SerialNumber: 0000:00:1d.2
[    0.818550] hub 4-0:1.0: >USB hub found
[    0.818563] hub 4-0:1.0: >2 ports detected
[    0.818726] uhci_hcd 0000:00:1d.3: >setting latency timer to 64
[    0.818735] uhci_hcd 0000:00:1d.3: >UHCI Host Controller
[    0.818750] uhci_hcd 0000:00:1d.3: >new USB bus registered, assigned bus number 5
[    0.818810] uhci_hcd 0000:00:1d.3: >irq 16, io base 0x00001880
[    0.818892] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.818901] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.818908] usb usb5: >Product: UHCI Host Controller
[    0.818915] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.818922] usb usb5: >SerialNumber: 0000:00:1d.3
[    0.819196] hub 5-0:1.0: >USB hub found
[    0.819209] hub 5-0:1.0: >2 ports detected
[    0.819529] usbcore: registered new interface driver libusual
[    0.819651] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.823620] i8042: Detected active multiplexing controller, rev 1.1
[    0.826273] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.826292] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.826374] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.826453] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.826530] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.826855] mousedev: PS/2 mouse device common for all mice
[    0.827538] rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
[    0.827588] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.827726] device-mapper: uevent: version 1.0.3
[    0.827914] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.828034] EISA: Probing bus 0 at eisa.0
[    0.828040] EISA: Cannot allocate resource for mainboard
[    0.828046] Cannot allocate resource for EISA slot 1
[    0.828050] Cannot allocate resource for EISA slot 2
[    0.828055] Cannot allocate resource for EISA slot 3
[    0.828059] Cannot allocate resource for EISA slot 4
[    0.828064] Cannot allocate resource for EISA slot 5
[    0.828068] Cannot allocate resource for EISA slot 6
[    0.828072] Cannot allocate resource for EISA slot 7
[    0.828077] Cannot allocate resource for EISA slot 8
[    0.828081] EISA: Detected 0 cards.
[    0.828213] cpuidle: using governor ladder
[    0.828366] cpuidle: using governor menu
[    0.828372] EFI Variables Facility v0.08 2004-May-17
[    0.828905] ashmem: initialized
[    0.829228] TCP: cubic registered
[    0.829534] NET: Registered protocol family 10
[    0.830028] NET: Registered protocol family 17
[    0.830077] Key type dns_resolver registered
[    0.830269] Using IPI No-Shortcut mode
[    0.830521] PM: Hibernation image not present or could not be loaded.
[    0.830549] registered taskstats version 1
[    0.836739] Key type trusted registered
[    0.842660] Key type encrypted registered
[    0.849406]   Magic number: 9:261:589
[    0.849565] rtc_cmos 00:04: >setting system clock to 2013-04-22 15:35:13 UTC (1366644913)
[    0.850508] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.850514] EDD information not available.
[    0.862728] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.124072] ata4: SATA link down (SStatus 0 SControl 300)
[    1.124131] ata3: SATA link down (SStatus 0 SControl 300)
[    1.124186] ata2: SATA link down (SStatus 0 SControl 300)
[    1.128055] usb 1-7: >new high-speed USB device number 2 using ehci_hcd
[    1.136653] isapnp: No Plug & Play device found
[    1.180170] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.219738] ata1.00: ATA-8: WDC WD1600BEVT-00A23T0, 01.01A01, max UDMA/133
[    1.219745] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.221684] ata1.00: configured for UDMA/133
[    1.221983] scsi 0:0:0:0: >Direct-Access     ATA      WDC WD1600BEVT-0 01.0 PQ: 0 ANSI: 5
[    1.222297] sd 0:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.222371] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[    1.222492] sd 0:0:0:0: >[sda] Write Protect is off
[    1.222503] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    1.222593] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.254898]  sda: sda1 sda2 sda3
[    1.255705] sd 0:0:0:0: >[sda] Attached SCSI disk
[    1.277142] usb 1-7: >New USB device found, idVendor=04f2, idProduct=b144
[    1.277150] usb 1-7: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.277156] usb 1-7: >Product: USB 2.0 Camera
[    1.277162] usb 1-7: >Manufacturer: Chicony Corp.
[    2.794780] ACPI: Battery Slot [BAT1] (battery present)
[    2.794932] Freeing unused kernel memory: 756k freed
[    2.795474] Write protecting the kernel text: 5960k
[    2.795518] Write protecting the kernel read-only data: 2424k
[    2.795523] NX-protecting the kernel data: 4280k
[    2.837993] udevd[100]: starting version 175
[    3.077422] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.077775] r8169 0000:05:00.0: >irq 44 for MSI/MSI-X
[    3.078324] r8169 0000:05:00.0: >eth0: RTL8102e at 0xf8424000, 44:87:fc:13:15:ab, XID 04e00000 IRQ 44
[    5.919135] EXT4-fs (loop0): INFO: recovery required on readonly filesystem
[    5.919145] EXT4-fs (loop0): write access will be enabled during recovery
[    9.756254] EXT4-fs (loop0): orphan cleanup on readonly fs
[    9.756280] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 274006
[    9.756435] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262698
[    9.756528] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262695
[    9.756568] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262693
[    9.756629] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 264373
[    9.756669] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 273972
[    9.756708] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262773
[    9.756747] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262763
[    9.756785] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262597
[    9.756824] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262611
[    9.756863] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262705
[    9.756909] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262703
[    9.756947] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 262639
[    9.756986] EXT4-fs (loop0): ext4_orphan_cleanup: deleting unreferenced inode 273967
[    9.757020] EXT4-fs (loop0): 14 orphan inodes deleted
[    9.757025] EXT4-fs (loop0): recovery complete
[   10.185324] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   23.983880] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k
[   24.004822] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.028662] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   24.055876] udevd[420]: starting version 175
[   24.168688] lp: driver loaded but no devices found
[   24.586890] ppdev: user-space parallel port driver
[   24.587871] Bluetooth: Core ver 2.16
[   24.588230] NET: Registered protocol family 31
[   24.588239] Bluetooth: HCI device and connection manager initialized
[   24.589728] Bluetooth: HCI socket layer initialized
[   24.589739] Bluetooth: L2CAP socket layer initialized
[   24.589763] Bluetooth: SCO socket layer initialized
[   24.598865] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.598876] Bluetooth: BNEP filters: protocol multicast
[   24.656130] Bluetooth: RFCOMM TTY layer initialized
[   24.656146] Bluetooth: RFCOMM socket layer initialized
[   24.656152] Bluetooth: RFCOMM ver 1.11
[   24.706084] type=1400 audit(1366634137.350:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=518 comm="apparmor_parser"
[   24.707790] type=1400 audit(1366634137.350:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=518 comm="apparmor_parser"
[   26.286640] tpm_tis 00:06: >1.2 TPM (device-id 0xFE, rev-id 70)
[   26.397979] cfg80211: Calling CRDA to update world regulatory domain
[   26.421389] [drm] Initialized drm 1.1.0 20060810
[   26.446256] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \_SB_.PCI0.LPC0.EC0_.PMRG 1 (20120320/utaddress-251)
[   26.446278] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \_SB_.PCI0.LPC0.TCOI 2 (20120320/utaddress-251)
[   26.446293] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.446300] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   26.446309] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 1 (20120320/utaddress-251)
[   26.446324] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC0.EC0_.PMRG 2 (20120320/utaddress-251)
[   26.446339] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.446349] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC0.GPOX 1 (20120320/utaddress-251)
[   26.446364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.446370] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   26.520138] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   26.520149] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520156] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   26.520163] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520169] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   26.520177] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520183] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   26.520191] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520197] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   26.520205] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520211] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   26.520218] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520225] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   26.520232] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520239] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   26.520246] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520253] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   26.520260] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520266] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   26.520272] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520279] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   26.520285] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520291] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   26.520298] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520304] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   26.520311] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   26.520317] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   26.520346] cfg80211: Pending regulatory request, waiting for it to be processed...
[   26.520747] rtl8192se: FW Power Save off (module option)
[   26.520903] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[   26.520903] Loading firmware rtlwifi/rtl8192sefw.bin
[   26.552946] i915 0000:00:02.0: >setting latency timer to 64
[   26.553784] i915 0000:00:02.0: >irq 45 for MSI/MSI-X
[   26.553815] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   26.553821] [drm] Driver supports precise vblank timestamp query.
[   26.554242] Linux video capture interface: v2.00
[   26.557300] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b144)
[   26.605041] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   26.606061] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/input/input5
[   26.606496] usbcore: registered new interface driver uvcvideo
[   26.606503] USB Video Class driver (1.1.1)
[   26.659953] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x105
[   27.134722] [drm] initialized overlay support
[   27.216445] init: failsafe main process (664) killed by TERM signal
[   27.262601] fbcon: inteldrmfb (fb0) is primary device
[   27.265648] Console: switching to colour frame buffer device 128x37
[   27.265720] fb0: inteldrmfb frame buffer device
[   27.265726] drm: registered panic notifier
[   27.265826] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120320/video-1157)
[   27.265848] video: probe of LNXVIDEO:00 failed with error 5
[   27.279138] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   27.279408] snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X
[   27.403611] psmouse serio4: >synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[   27.443842] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   27.624381] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   27.686920] ieee80211 phy0: >Selected rate control algorithm 'rtl_rc'
[   27.711456] type=1400 audit(1366634140.354:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=779 comm="apparmor_parser"
[   27.712737] type=1400 audit(1366634140.358:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=779 comm="apparmor_parser"
[   27.717325] type=1400 audit(1366634140.362:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=780 comm="apparmor_parser"
[   27.718527] type=1400 audit(1366634140.362:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=780 comm="apparmor_parser"
[   27.740405] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x105
[   27.749202] type=1400 audit(1366634140.394:8): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=800 comm="apparmor_parser"
[   27.750663] type=1400 audit(1366634140.394:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=800 comm="apparmor_parser"
[   27.751461] type=1400 audit(1366634140.394:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=800 comm="apparmor_parser"
[   27.768810] type=1400 audit(1366634140.414:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=799 comm="apparmor_parser"
[   27.845428] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   27.845439] cfg80211: World regulatory domain updated:
[   27.845444] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.845451] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.845458] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.845464] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.845471] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.845477] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.845517] cfg80211: Calling CRDA for country: EC
[   27.922376] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   27.929553] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   27.929565] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929572] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   27.929578] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929584] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   27.929591] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929597] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   27.929604] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929610] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   27.929616] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929622] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   27.929629] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929635] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   27.929642] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929648] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   27.929654] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929660] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   27.929667] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929673] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   27.929680] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929685] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   27.929692] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929698] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   27.929705] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929711] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   27.929718] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   27.929723] cfg80211: Disabling freq 2484 MHz
[   27.929732] cfg80211: Regulatory domain changed to country: EC
[   27.929736] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.929743] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   27.929750] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[   27.929757] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[   27.929763] cfg80211:   (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[   27.948192] r8169 0000:05:00.0: >eth0: link down
[   27.951415] r8169 0000:05:00.0: >eth0: link down
[   27.952508] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.956467] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.120567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.122389] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.480779] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   28.481271] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   29.535769] r8169 0000:05:00.0: >eth0: link up
[   29.536349] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   30.860836] init: anacron main process (902) killed by TERM signal
[   31.623677] init: plymouth-stop pre-start process (1098) terminated with status 1

3dk yı geçirmedim. Sorunumla ilgilendiğiniz için teşekkür ederim. umarım olumlu bir sonuca ulaşır.

if

#7
22 Nisan 2013 - 17:42:45
Maalesef burdan bir şey çıkmadı @lordmacros. Önereceğim iki yol var. Biri daha yeni bir çekirdek kurmak, diğeri sizin gibi sorun yaşayan başka üyelerimize sunduğumu çözümü deneme yanılmayla uygulamak. /etc/rc.local içine
Kod Seç
echo USBN > /proc/acpi/wakeup yazmak. Burdaki N 1,2,3 ve 4 oluyor sizin için. Teker teker denemek gerek çünkü hangisinin soruna yol açtığını bulamadık. Yazmak için: http://forum.ubuntu-tr.net/index.php?topic=38036.msg457558#msg457558
Çekirdek için burdaki[1] dosyalardan 32 bit Ubuntu kullanıyorsanız 32 bit, 64 bit kullanıyorsanız 64 bit olanlar ile linux-headers-3.7.10-030710_3.7.10-030710.201302271235_all.deb dosyasını indirip
Kod Seç
dpkg -i *.deb komutunu vermelisiniz.
Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri