Asus TP-LİNK USB-13 Tanıtamadım

[warpalawas]

Odada bulunan modemi mutfağa taşıdım ve odamdaki masaüstü bilgisayara Asus Usb Tp-*bağlantı adaptör aldım ve bunu Ubuntu'ya tanıtamadım. Bazen görüyor bazen görmüyor.

Tanıtamadım derken sanmayın ki bir şey yaptım. Tanımasını bekledim ama tanımadı.

Forumdan edindiğim bilgiye göre istenen kodları aşağıya çıkarıyorum.

Kod Seç Genişlet

cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS"

Kod Seç Genişlet

uname -a
Linux antikor-System-Product-Name 3.2.0-39-generic-pae #62-Ubuntu SMP Wed Feb 27 22:25:11 UTC 2013 i686 athlon i386 GNU/Linux

Kod Seç Genişlet

lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8500 GT] (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

Kod Seç Genişlet

lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0b05:17ab ASUSTek Computer, Inc.
Bus 004 Device 002: ID 1d57:0016 
Bus 001 Device 005: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick

Kod Seç Genişlet

rfkill list
'rfkill' komutu '/usr/sbin/rfkill' içinde uygun
Komut konumlandırılamıyor çünkü '/usr/sbin' YOL çevre değişkenlerinde dahil değil.
Bu büyük olasılıkla kullanıcı hesabınızla ilgili idari ayrıcalıkların eksikliği yüzündendir.
rfkill: komut bulunamadı

Kod Seç Genişlet

sudo lshw -C network
[sudo] password for antikor:
  *-network               
       açıklama: Eternet interface
       ürün: RTL8111/8168B PCI Express Gigabit Ethernet controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: eth0
       sürüm: 06
       serial: c8:60:00:60:83:8e
       boyut: 10Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       kaynaklar: irq:42 ioport:e800(boyut=256) bellek:f8fff000-f8ffffff bellek:f8ff8000-f8ffbfff
  *-network
       açıklama: Kablosuz arayüz
       physical id: 1
       bus info: usb@1:3
       mantıksal ad: wlan0
       serial: 10:bf:48:4a:8b:24
       kapasiteler: eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8192cu driverversion=3.2.0-39-generic-pae firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn

Kod Seç Genişlet

ifconfig
'ifconfig' komutu '/sbin/ifconfig' içinde uygun
Komut konumlandırılamıyor çünkü '/sbin' YOL çevre değişkenlerinde dahil değil.
Bu büyük olasılıkla kullanıcı hesabınızla ilgili idari ayrıcalıkların eksikliği yüzündendir.
ifconfig: komut bulunamadı

Kod Seç Genişlet

iwconfig
'iwconfig' komutu '/sbin/iwconfig' içinde uygun
Komut konumlandırılamıyor çünkü '/sbin' YOL çevre değişkenlerinde dahil değil.
Bu büyük olasılıkla kullanıcı hesabınızla ilgili idari ayrıcalıkların eksikliği yüzündendir.
iwconfig: komut bulunamadı

Kod Seç Genişlet

iwlist scanning
'iwlist' komutu '/sbin/iwlist' içinde uygun
Komut konumlandırılamıyor çünkü '/sbin' YOL çevre değişkenlerinde dahil değil.
Bu büyük olasılıkla kullanıcı hesabınızla ilgili idari ayrıcalıkların eksikliği yüzündendir.
iwlist: komut bulunamadı

Kod Seç Genişlet

lsmod
Module                  Size  Used by
nls_iso8859_1          12617  1
nls_cp437              12751  1
vfat                   17308  1
fat                    55605  1 vfat
usb_storage            39683  1
arc4                   12473  2
rtl8192cu              97757  0
rtl8192c_common        69519  1 rtl8192cu
rtlwifi                95839  1 rtl8192cu
mac80211              436493  3 rtl8192cu,rtl8192c_common,rtlwifi
cfg80211              178877  2 rtlwifi,mac80211
usbhid                 41937  0
hid                    77428  1 usbhid
snd_hda_codec_realtek   174313  1
snd_hda_intel          32719  3
snd_hda_codec         109562  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
rfcomm                 38139  0
bnep                   17830  2
snd_pcm                80916  2 snd_hda_intel,snd_hda_codec
bluetooth             158479  10 rfcomm,bnep
ppdev                  12849  0
psmouse                86520  0
snd_seq_midi           13132  0
nvidia               8556879  28
asus_atk0110           17742  0
parport_pc             32114  1
snd_rawmidi            25424  1 snd_seq_midi
snd_seq_midi_event     14475  1 snd_seq_midi
snd_seq                51592  2 snd_seq_midi,snd_seq_midi_event
snd_timer              28931  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
k10temp                12990  0
mac_hid                13077  0
serio_raw              13027  0
binfmt_misc            17292  1
snd                    62218  15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
wmi                    18744  0
soundcore              14635  1 snd
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
sp5100_tco             13495  0
i2c_piix4              13093  0
lp                     17455  0
parport                40930  3 ppdev,parport_pc,lp
r8169                  56368  0
pata_atiixp            12999  1

Kod Seç Genişlet

dmesg

[    0.338972] pnp 00:0d: [io  0x0290-0x029f]
[    0.338973] pnp 00:0d: [io  0x0300-0x030f]
[    0.338974] pnp 00:0d: [io  0x0a30-0x0a3f]
[    0.339010] system 00:0d: [io  0x0230-0x023f] has been reserved
[    0.339012] system 00:0d: [io  0x0290-0x029f] has been reserved
[    0.339014] system 00:0d: [io  0x0300-0x030f] has been reserved
[    0.339016] system 00:0d: [io  0x0a30-0x0a3f] has been reserved
[    0.339018] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.339038] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[    0.339074] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[    0.339076] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.358908] Freeing initrd memory: 13828k freed
[    0.380352] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[    0.380355] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[    0.380357] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[    0.380359] pnp 00:0f: [mem 0x00100000-0x7fefffff]
[    0.380360] pnp 00:0f: [mem 0xfec00000-0xffffffff]
[    0.380436] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.380438] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.380440] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.380442] system 00:0f: [mem 0x00100000-0x7fefffff] could not be reserved
[    0.380445] system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.380448] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.380520] pnp: PnP ACPI: found 16 devices
[    0.380521] ACPI: ACPI bus type pnp unregistered
[    0.380524] PnPBIOS: Disabled by ACPI PNP
[    0.417143] PCI: max bus depth: 1 pci_try_num: 2
[    0.417156] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.417158] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.417161] pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfebfffff]
[    0.417164] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.417167] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.417169] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.417172] pci 0000:00:04.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.417175] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[    0.417195] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.417198] pci 0000:00:02.0: setting latency timer to 64
[    0.417205] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.417207] pci 0000:00:04.0: setting latency timer to 64
[    0.417213] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.417215] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.417217] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.417219] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.417220] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xdfffffff]
[    0.417222] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.417224] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.417226] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfebfffff]
[    0.417228] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.417230] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.417231] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.417233] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.417235] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.417237] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.417238] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.417240] pci_bus 0000:03: resource 8 [mem 0x7ff00000-0xdfffffff]
[    0.417242] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.417272] NET: Registered protocol family 2
[    0.417319] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.417455] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.417821] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.418024] TCP: Hash tables configured (established 131072 bind 65536)
[    0.418026] TCP reno registered
[    0.418028] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.418035] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.418112] NET: Registered protocol family 1
[    0.418137] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.520049] pci 0000:00:12.0: PCI INT A disabled
[    0.520062] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.600051] pci 0000:00:12.1: PCI INT A disabled
[    0.600076] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.600091] pci 0000:00:12.2: PCI INT B disabled
[    0.600097] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.680048] pci 0000:00:13.0: PCI INT A disabled
[    0.680060] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.760049] pci 0000:00:13.1: PCI INT A disabled
[    0.760071] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.760086] pci 0000:00:13.2: PCI INT B disabled
[    0.760100] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.840050] pci 0000:00:14.5: PCI INT C disabled
[    0.840070] pci 0000:01:00.0: Boot video device
[    0.840074] PCI: CLS 64 bytes, default 64
[    0.840299] IBS: LVT offset 1 assigned
[    0.840310] perf: AMD IBS detected (0x0000001f)
[    0.840446] audit: initializing netlink socket (disabled)
[    0.840454] type=2000 audit(1364415544.836:1): initialized
[    0.855490] highmem bounce pool size: 64 pages
[    0.855494] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.857006] VFS: Disk quotas dquot_6.5.2
[    0.857063] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.857501] fuse init (API version 7.17)
[    0.857632] msgmni has been set to 1712
[    0.858045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.858073] io scheduler noop registered
[    0.858076] io scheduler deadline registered
[    0.858089] io scheduler cfq registered (default)
[    0.858185] pcieport 0000:00:02.0: setting latency timer to 64
[    0.858211] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.858245] pcieport 0000:00:04.0: setting latency timer to 64
[    0.858263] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[    0.858308] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.858322] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.858421] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.858424] ACPI: Power Button [PWRB]
[    0.858456] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.858459] ACPI: Power Button [PWRF]
[    0.912395] ERST: Table is not found!
[    0.912397] GHES: HEST is not enabled!
[    0.912452] isapnp: Scanning for PnP cards...
[    0.912479] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.932924] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.266371] isapnp: No Plug & Play device found
[    1.301049] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.312325] Linux agpgart interface v0.103
[    1.313818] brd: module loaded
[    1.314596] loop: module loaded
[    1.314687] ahci 0000:00:11.0: version 3.0
[    1.314702] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.314787] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.314790] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.315262] scsi0 : ahci
[    1.315415] scsi1 : ahci
[    1.315512] scsi2 : ahci
[    1.315590] scsi3 : ahci
[    1.315673] ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 22
[    1.315677] ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 22
[    1.315680] ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 22
[    1.315683] ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 22
[    1.315780] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.315804] pata_acpi 0000:00:14.1: setting latency timer to 64
[    1.316053] Fixed MDIO Bus: probed
[    1.316066] tun: Universal TUN/TAP device driver, 1.6
[    1.316067] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.316146] PPP generic driver version 2.4.2
[    1.316233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.316243] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.316255] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.316304] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.316311] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.316331] ehci_hcd 0000:00:12.2: debug port 1
[    1.316351] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9fff800
[    1.328045] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.328181] hub 1-0:1.0: USB hub found
[    1.328184] hub 1-0:1.0: 6 ports detected
[    1.328248] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.328264] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.328330] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.328336] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.328355] ehci_hcd 0000:00:13.2: debug port 1
[    1.328377] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9fff400
[    1.340043] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.340190] hub 2-0:1.0: USB hub found
[    1.340193] hub 2-0:1.0: 6 ports detected
[    1.340256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.340271] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.340287] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.340355] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.340377] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9ffe000
[    1.400170] hub 3-0:1.0: USB hub found
[    1.400176] hub 3-0:1.0: 3 ports detected
[    1.400225] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.400241] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    1.400306] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.400321] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9ffd000
[    1.460169] hub 4-0:1.0: USB hub found
[    1.460175] hub 4-0:1.0: 3 ports detected
[    1.460226] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.460242] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.460310] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.460333] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9ffc000
[    1.520168] hub 5-0:1.0: USB hub found
[    1.520174] hub 5-0:1.0: 3 ports detected
[    1.520226] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.520242] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.520304] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.520319] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9ffb000
[    1.580172] hub 6-0:1.0: USB hub found
[    1.580179] hub 6-0:1.0: 3 ports detected
[    1.580234] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.580249] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.580312] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.580327] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ffa000
[    1.632069] ata1: SATA link down (SStatus 0 SControl 300)
[    1.632103] ata4: SATA link down (SStatus 0 SControl 300)
[    1.632133] ata2: SATA link down (SStatus 0 SControl 300)
[    1.636094] ata3: SATA link down (SStatus 0 SControl 300)
[    1.640047] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[    1.640171] hub 7-0:1.0: USB hub found
[    1.640178] hub 7-0:1.0: 2 ports detected
[    1.640226] uhci_hcd: USB Universal Host Controller Interface driver
[    1.640276] usbcore: registered new interface driver libusual
[    1.640316] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.640719] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.640727] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.640876] mousedev: PS/2 mouse device common for all mice
[    1.641007] rtc_cmos 00:03: RTC can wake from S4
[    1.641120] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.641144] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.641191] device-mapper: uevent: version 1.0.3
[    1.641269] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.641298] EISA: Probing bus 0 at eisa.0
[    1.641299] EISA: Cannot allocate resource for mainboard
[    1.641301] Cannot allocate resource for EISA slot 1
[    1.641302] Cannot allocate resource for EISA slot 2
[    1.641304] Cannot allocate resource for EISA slot 3
[    1.641305] Cannot allocate resource for EISA slot 4
[    1.641307] Cannot allocate resource for EISA slot 5
[    1.641308] Cannot allocate resource for EISA slot 6
[    1.641309] Cannot allocate resource for EISA slot 7
[    1.641310] Cannot allocate resource for EISA slot 8
[    1.641312] EISA: Detected 0 cards.
[    1.641319] cpufreq-nforce2: No nForce2 chipset.
[    1.641320] cpuidle: using governor ladder
[    1.641322] cpuidle: using governor menu
[    1.641323] EFI Variables Facility v0.08 2004-May-17
[    1.641484] TCP cubic registered
[    1.641561] NET: Registered protocol family 10
[    1.641919] NET: Registered protocol family 17
[    1.641922] Registering the dns_resolver key type
[    1.641937] Using IPI No-Shortcut mode
[    1.642039] PM: Hibernation image not present or could not be loaded.
[    1.642046] registered taskstats version 1
[    1.646426]   Magic number: 5:404:347
[    1.646472]  pci0000:00: hash matches
[    1.646525] rtc_cmos 00:03: setting system clock to 2013-03-27 20:19:06 UTC (1364415546)
[    1.646531] powernow-k8: Found 1 AMD Athlon(tm) II X2 260 Processor (2 cpu cores) (version 2.20.00)
[    1.646570] powernow-k8:    0 : pstate 0 (3200 MHz)
[    1.646572] powernow-k8:    1 : pstate 1 (2500 MHz)
[    1.646573] powernow-k8:    2 : pstate 2 (1900 MHz)
[    1.646575] powernow-k8:    3 : pstate 3 (800 MHz)
[    1.647004] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.647006] EDD information not available.
[    1.647145] Freeing unused kernel memory: 740k freed
[    1.647369] Write protecting the kernel text: 5828k
[    1.647384] Write protecting the kernel read-only data: 2380k
[    1.647385] NX-protecting the kernel data: 4412k
[    1.663953] udevd[91]: starting version 175
[    1.664575] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.710659] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.710746] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.710777] r8169 0000:02:00.0: setting latency timer to 64
[    1.710832] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    1.711185] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xf8416000, c8:60:00:60:83:8e, XID 0c900800 IRQ 42
[    1.711188] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.711570] scsi4 : pata_atiixp
[    1.712743] scsi5 : pata_atiixp
[    1.713184] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.713187] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.840042] Refined TSC clocksource calibration: 3214.431 MHz.
[    1.840052] Switching to clocksource tsc
[    1.908371] ata6.00: ATAPI: PHILIPS SPD2514T, P1.1, max UDMA/100
[    1.908531] ata6.01: ATA-7: SAMSUNG HD252HJ, 1AC01113, max UDMA7
[    1.908534] ata6.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.924369] ata6.00: configured for UDMA/100
[    1.932523] ata6.01: configured for UDMA/100
[    1.933826] scsi 5:0:0:0: CD-ROM            PHILIPS  SPD2514T         P1.1 PQ: 0 ANSI: 5
[    1.936512] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.936515] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.936635] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.936685] sr 5:0:0:0: Attached scsi generic sg0 type 5
[    1.936783] scsi 5:0:1:0: Direct-Access     ATA      SAMSUNG HD252HJ  1AC0 PQ: 0 ANSI: 5
[    1.936961] sd 5:0:1:0: Attached scsi generic sg1 type 0
[    1.937603] sd 5:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.937633] sd 5:0:1:0: [sda] Write Protect is off
[    1.937636] sd 5:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.937667] sd 5:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.979883]  sda: sda1 sda2 sda3 < sda5 >
[    1.980196] sd 5:0:1:0: [sda] Attached SCSI disk
[    2.148050] usb 4-1: new full-speed USB device number 2 using ohci_hcd
[    2.276462] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   18.035722] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.202950] udevd[327]: starting version 175
[   18.246660] lp: driver loaded but no devices found
[   18.247392] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   18.252867] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[   18.252870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.259927] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   18.277720] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[   18.293554] wmi: Mapper loaded
[   18.377583] nvidia: module license 'NVIDIA' taints kernel.
[   18.377587] Disabling lock debugging due to kernel taint
[   18.456291] parport_pc 00:06: reported by Plug and Play ACPI
[   18.456343] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   18.458899] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   18.458908] nvidia 0000:01:00.0: setting latency timer to 64
[   18.458912] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   18.459029] NVRM: loading NVIDIA UNIX x86 Kernel Module  310.14  Tue Oct  9 11:08:12 PDT 2012
[   18.460451] ATK0110 ATK0110:00: Overriding interface detection
[   18.483058] type=1400 audit(1364408363.332:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=648 comm="apparmor_parser"
[   18.483385] type=1400 audit(1364408363.332:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=648 comm="apparmor_parser"
[   18.483576] type=1400 audit(1364408363.332:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=648 comm="apparmor_parser"
[   18.483942] ppdev: user-space parallel port driver
[   18.495456] Bluetooth: Core ver 2.16
[   18.495519] NET: Registered protocol family 31
[   18.495521] Bluetooth: HCI device and connection manager initialized
[   18.495524] Bluetooth: HCI socket layer initialized
[   18.495525] Bluetooth: L2CAP socket layer initialized
[   18.495530] Bluetooth: SCO socket layer initialized
[   18.508090] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.508093] Bluetooth: BNEP filters: protocol multicast
[   18.512387] Bluetooth: RFCOMM TTY layer initialized
[   18.512395] Bluetooth: RFCOMM socket layer initialized
[   18.512398] Bluetooth: RFCOMM ver 1.11
[   18.525419] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.553407] lp0: using parport0 (interrupt-driven).
[   18.583459] hda_codec: ALC887-VD: BIOS auto-probing.
[   18.629007] input: HID Wireless Mouse HID Wireless Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input3
[   18.629424] generic-usb 0003:1D57:0016.0001: input,hidraw0: USB HID v1.10 Mouse [HID Wireless Mouse HID Wireless Mouse] on usb-0000:00:12.1-1/input0
[   18.629454] usbcore: registered new interface driver usbhid
[   18.629455] usbhid: USB HID core driver
[   18.645741] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   18.645866] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   18.645977] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   18.646085] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   18.646189] input: HDA ATI SB Line-Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   18.774218] cfg80211: Calling CRDA to update world regulatory domain
[   18.824386] init: failsafe main process (718) killed by TERM signal
[   18.872874] type=1400 audit(1364408363.724:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=786 comm="apparmor_parser"
[   18.873436] type=1400 audit(1364408363.724:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=786 comm="apparmor_parser"
[   18.906162] type=1400 audit(1364408363.756:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=823 comm="apparmor_parser"
[   18.906494] type=1400 audit(1364408363.756:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=823 comm="apparmor_parser"
[   18.906685] type=1400 audit(1364408363.756:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=823 comm="apparmor_parser"
[   18.909734] type=1400 audit(1364408363.760:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=822 comm="apparmor_parser"
[   18.915813] type=1400 audit(1364408363.764:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=826 comm="apparmor_parser"
[   19.085648] cfg80211: World regulatory domain updated:
[   19.085652] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.085654] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.085656] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.085658] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.085660] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.085662] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.125836] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input9
[   19.157153] r8169 0000:02:00.0: eth0: link down
[   19.157338] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.157561] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.290474] rtl8192cu: MAC address: 10:bf:48:4a:8b:24
[   19.290479] rtl8192cu: Board Type 0
[   19.319619] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   19.319625] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   19.319627] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319629] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   19.319631] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319633] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   19.319635] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319636] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   19.319638] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319640] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   19.319642] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319643] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   19.319645] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319647] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   19.319649] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319650] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   19.319652] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319654] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   19.319655] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319657] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   19.319659] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319661] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   19.319662] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   19.319664] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   19.319666] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   19.319667] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   19.319728] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   19.341933] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   19.342627] usbcore: registered new interface driver rtl8192cu
[   19.497112] rtl8192cu: MAC auto ON okay!
[   19.531080] rtl8192cu: Tx queue select: 0x05
[   19.532068] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
[   19.606296] init: udev-fallback-graphics main process (1107) terminated with status 1
[   19.833618] init: lightdm main process (1122) killed by TERM signal
[   19.982689] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.983074] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.716457] NVRM: GPU at 0000:01:00: GPU-6f650202-d7ab-6e65-b931-f59d04254912
[ 1378.516106] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 1378.690033] Initializing USB Mass Storage driver...
[ 1378.690330] scsi6 : usb-storage 1-5:1.0
[ 1378.690538] usbcore: registered new interface driver usb-storage
[ 1378.690543] USB Mass Storage support registered.
[ 1379.765344] scsi 6:0:0:0: Direct-Access     TOSHIBA  TransMemory      PMAP PQ: 0 ANSI: 0 CCS
[ 1379.768067] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 1381.083615] sd 6:0:0:0: [sdb] 15240576 512-byte logical blocks: (7.80 GB/7.26 GiB)
[ 1381.084397] sd 6:0:0:0: [sdb] Write Protect is off
[ 1381.084408] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1381.085099] sd 6:0:0:0: [sdb] No Caching mode page present
[ 1381.085111] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1381.089591] sd 6:0:0:0: [sdb] No Caching mode page present
[ 1381.089602] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1381.110008]  sdb: sdb1
[ 1381.112941] sd 6:0:0:0: [sdb] No Caching mode page present
[ 1381.112951] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1381.112960] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1489.732372] sdb: detected capacity change from 7803174912 to 0
[ 1492.615265] usb 1-5: USB disconnect, device number 4
[ 1590.952106] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[ 1591.090170] scsi7 : usb-storage 1-6:1.0
[ 1592.165269] scsi 7:0:0:0: Direct-Access     TOSHIBA  TransMemory      PMAP PQ: 0 ANSI: 0 CCS
[ 1592.167726] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 1593.479040] sd 7:0:0:0: [sdb] 15240576 512-byte logical blocks: (7.80 GB/7.26 GiB)
[ 1593.479651] sd 7:0:0:0: [sdb] Write Protect is off
[ 1593.479663] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1593.480501] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1593.480512] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1593.484227] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1593.484238] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1593.504557]  sdb: sdb1
[ 1593.507625] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1593.507635] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1593.507643] sd 7:0:0:0: [sdb] Attached SCSI removable disk/code]
[code]dmesg | tail
[ 1593.479651] sd 7:0:0:0: [sdb] Write Protect is off
[ 1593.479663] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1593.480501] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1593.480512] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1593.484227] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1593.484238] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1593.504557]  sdb: sdb1
[ 1593.507625] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1593.507635] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1593.507643] sd 7:0:0:0: [sdb] Attached SCSI removable disk

[if]

12.04'da bu[1] şekilde çözülmüş.

[1] http://ubuntuforums.org/showthread.php?t=2009075&p=12049559#post12049559

Firmware için: http://anonscm.debian.org/viewvc/kernel/dists/trunk/firmware-nonfree/realtek/rtlwifi/

[warpalawas]

@if,
yönlendirdiğiniz sayfadaki komutları uyguladım aldığım sonuçları aşağıya alıyorum

Kod Seç Genişlet

antikor@antikor-System-Product-Name:~$ wget http://media.cdn.ubuntu-de.org/forum/attachments/32/20/2844083-rtl8192cu-3.3.23192_dkms.tar.gz
--2013-03-28 18:49:35--  http://media.cdn.ubuntu-de.org/forum/attachments/32/20/2844083-rtl8192cu-3.3.23192_dkms.tar.gz
media.cdn.ubuntu-de.org (media.cdn.ubuntu-de.org) çözümleniyor... olmadı: İsim ya da servis bilinmiyor.
wget: `media.cdn.ubuntu-de.org' makine adresi çözümlenemedi
antikor@antikor-System-Product-Name:~$ sudo tar xvf 2844083-rtl8192cu-3.3.23192_dkms.tar.gz -C /usr/src
[sudo] password for antikor:
Sorry, try again.
[sudo] password for antikor:
tar: 2844083-rtl8192cu-3.3.23192_dkms.tar.gz: open olanaksız: Böyle bir dosya ya da dizin yok
tar: Error is not recoverable: exiting now
antikor@antikor-System-Product-Name:~$


Kod Seç Genişlet


#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

exit 0


Kod Seç Genişlet

antikor@antikor-System-Product-Name:~$ modprobe rtl8192cu
'modprobe' komutu '/sbin/modprobe' içinde uygun
Komut konumlandırılamıyor çünkü '/sbin' YOL çevre değişkenlerinde dahil değil.
Bu büyük olasılıkla kullanıcı hesabınızla ilgili idari ayrıcalıkların eksikliği yüzündendir.
modprobe: komut bulunamadı

Kod Seç Genişlet


echo "0b05 17ab" > /sys/bus/usb/drivers/rtl8192cu/new_id

antikor@antikor-System-Product-Name:~$ echo "0b05 17ab" > /sys/bus/usb/drivers/rtl8192cu/new_id
bash: /sys/bus/usb/drivers/rtl8192cu/new_id: Erişim engellendi

Firmware için: http://anonscm.debian.org/viewvc/kernel/dists/trunk/firmware-nonfree/realtek/rtlwifi/ bu sayfayı anlamadım ne yapacağım? Orada bir şeyler var indirdim açmıyor. Açmadan bir klasörün içine mi atacağım, ne yapacağım lütfen açıklarsanız sevinirim?

[heartsmagic]

@warpalawas, kablosuz için bakarız ancak senin kullanıcınla ilgili yetki sorunlar var gibi. ifconfig, iwconfig ve diğer yetki isteyen bazı komutlar mızmızlanmış. Kullanıcınla alakalı yetki ile ilgili işlemler yaptın mı? Şu komutlar ne döndürüyor?

Kod Seç Genişlet

id
echo $PATH

@if'in yönlendirdiği yerdeki işlemleri de internet bağlantısı olduğunda yapmalısın. En azından paketi indirmek için bağlantı şart. Ardından diğer komutları da denersin. Fakat yetki meselesi önem arz ediyor şu an.

[warpalawas]

@hearthmagic

Kod Seç Genişlet

id
uid=1000(antikor) gid=1000(antikor) gruplar=1000(antikor),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),109(lpadmin),124(sambashare)

Kod Seç Genişlet

echo $PATH
/usr/local/bin:/usr/bin:/bin:/usr/games

[heartsmagic]

Yol ayarlarında sorun var. Kendin daha önce bir şeyler yapmaya çalıştın mı? Örneğin bazı dosyaları değiştirip ekleme, çıkartma yapmaya çalıştın mı? Şu dosyaların içeriklerini lütfen buraya kod etiketi içinde geç:

Kod Seç Genişlet

gedit ~/.bashrc
gedit ~/.bash_profile
gedit /etc/profile

[warpalawas]

Yol ayarlarında sorun var. Kendin daha önce bir şeyler yapmaya çalıştın mı? Örneğin bazı dosyaları değiştirip ekleme, çıkartma yapmaya çalıştın mı? Şu dosyaların içeriklerini lütfen buraya kod etiketi içinde geç:

Kod Seç Genişlet

gedit ~/.bashrc
gedit ~/.bash_profile
gedit /etc/profile

Sayın hearthmagic,
istediğiniz kodları alamıyorum. Alsam da buraya göndermem biraz sorunlu. Ama kendin daha önce bir şeyler yapmaya çalıştın mı diye sormuşsunuz onun yanıtını aşağıdaki başlıkta verebilirim. Geçenlerde yine bir sorun yaşamıştım bütün iş ve  işlemleri bir arkadaşımız sayesinde aşmıştım. Ubuntum ile ilgili yüklenen her şey aşağıdaki başlıkta var.

http://forum.ubuntu-tr.net/index.php?topic=38369.0

[warpalawas]

Kod Seç Genişlet

# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples

# If not running interactively, don't do anything
[ -z "$PS1" ] && return

# don't put duplicate lines or lines starting with space in the history.
# See bash(1) for more options
HISTCONTROL=ignoreboth

# append to the history file, don't overwrite it
shopt -s histappend

# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=1000
HISTFILESIZE=2000

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize

# If set, the pattern "**" used in a pathname expansion context will
# match all files and zero or more directories and subdirectories.
#shopt -s globstar

# make less more friendly for non-text input files, see lesspipe(1)
[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"

# set variable identifying the chroot you work in (used in the prompt below)
if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then
    debian_chroot=$(cat /etc/debian_chroot)
fi

# set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in
    xterm-color) color_prompt=yes;;
esac

# uncomment for a colored prompt, if the terminal has the capability; turned
# off by default to not distract the user: the focus in a terminal window
# should be on the output of commands, not on the prompt
#force_color_prompt=yes

if [ -n "$force_color_prompt" ]; then
    if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
# We have color support; assume it's compliant with Ecma-48
# (ISO/IEC-6429). (Lack of such support is extremely rare, and such
# a case would tend to support setf rather than setaf.)
color_prompt=yes
    else
color_prompt=
    fi
fi

if [ "$color_prompt" = yes ]; then
    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
else
    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_prompt force_color_prompt

# If this is an xterm set the title to user@host:dir
case "$TERM" in
xterm*|rxvt*)
    PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
    ;;
*)
    ;;
esac

# enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then
    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
    alias ls='ls --color=auto'
    #alias dir='dir --color=auto'
    #alias vdir='vdir --color=auto'

    alias grep='grep --color=auto'
    alias fgrep='fgrep --color=auto'
    alias egrep='egrep --color=auto'
fi

# some more ls aliases
alias ll='ls -alF'
alias la='ls -A'
alias l='ls -CF'

# Add an "alert" alias for long running commands.  Use like so:
#   sleep 10; alert
alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"'

# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.

if [ -f ~/.bash_aliases ]; then
    . ~/.bash_aliases
fi

# enable programmable completion features (you don't need to enable
# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
# sources /etc/bash.bashrc).
if [ -f /etc/bash_completion ] && ! shopt -oq posix; then
    . /etc/bash_completion
fi

Kod Seç Genişlet

# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).

if [ "$PS1" ]; then
  if [ "$BASH" ] && [ "$BASH" != "/bin/sh" ]; then
    # The file bash.bashrc already sets the default PS1.
    # PS1='\h:\w\$ '
    if [ -f /etc/bash.bashrc ]; then
      . /etc/bash.bashrc
    fi
  else
    if [ "`id -u`" -eq 0 ]; then
      PS1='# '
    else
      PS1='$ '
    fi
  fi
fi

# The default umask is now handled by pam_umask.
# See pam_umask(8) and /etc/login.defs.

if [ -d /etc/profile.d ]; then
  for i in /etc/profile.d/*.sh; do
    if [ -r $i ]; then
      . $i
    fi
  done
  unset i
fi

[heartsmagic]

.bash_profile dosyasını geçmemişsin, ona da bakabilir miyim?

[warpalawas]

Öncelikle geç yanıt verdiğim için özür dilerim elimde olmayan nedenlerle bilgisayarımdan uzaktım. O nedenle istediğiniz bilgiyi paylaşamadım.

Sayın heartsmagic,
istediğiniz kodu yazınca bir sayfa açılıyor cursor yanıp sönüyor ama hiç bir bilgi gelmiyor. Görüntüsünü aşağıya almaya çalışacağım.

[heartsmagic]

Ev dizinindeki dosya mı bu? Gerçi "~" dediğine göre öyle. Hani $PATH değişkenini düzeltiriz bir şekilde ancak sistem kendisini belli ki bir yerlerden okuyor şu anda. sudo'da sıkıntı yoktu sanırım. Şunu bir dener misin:

Kod Seç Genişlet

sudo -i

Bu şekilde root olacaksın. Ardından çıktıya tekrar bakalım:

Kod Seç Genişlet

echo $PATH

[warpalawas]

@heartsmagic,

Kod Seç Genişlet

antikor@antikor-System-Product-Name:~$ sudo -i
[sudo] password for antikor:
root@antikor-System-Product-Name:~# echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
root@antikor-System-Product-Name:~#


[heartsmagic]

root için sorun yok, demek ki kullanıcınla alaklı bir durum bu. Sistem genelinden almadığını anlamış olduk böylece. Kullanıcın için bir yerlerde belirleniyor bu değişken. Şu komutun çıktısını aktarır mısın? Ev dizininde vermen gerekiyor:

Kod Seç Genişlet

ls -a|grep "^\."

[warpalawas]

Şu komutun çıktısını aktarır mısın? Ev dizininde vermen gerekiyor:

Kod Seç Genişlet

ls -a|grep "^\."

@heartsmagic
Ev dizini içinde uç birimi açamadım. Eskiden sağ tuş yapınca uç birimi burada aç vardı. Şimdi yok. Nasıl açacağım lütfen yardım eder misiniz?

[heartsmagic]

ctrl+alt+t ile açarsan uçbirimi zaten doğrudan ev dizini içinde açılır.

[warpalawas]

@heartsmagic,

Kod Seç Genişlet

ls -a|grep "^\." komutunun çıktısı.

Kod Seç Genişlet

antikor@antikor-System-Product-Name:~$ ls -a|grep "^\."
.
..
.adobe
.bash_history
.bash_logout
.bashrc
.BillardGL.conf.v7
.cache
.compiz
.compiz-1
.config
.dbus
.dmrc
.fontconfig
.gconf
.gegl-0.0
.gimp-2.6
.gksu.lock
.gnome2
.gnupg
.goutputstream-572LMW
.goutputstream-8O81MW
.goutputstream-CMF7MW
.goutputstream-G2WCNW
.goutputstream-H9U9MW
.goutputstream-IO8LMW
.goutputstream-IOI9MW
.goutputstream-K0YTMW
.goutputstream-LUDFNW
.goutputstream-NIELMW
.goutputstream-Q8DPMW
.goutputstream-SIGJNW
.goutputstream-YZ3HNW
.gphoto
.gstreamer-0.10
.gtk-bookmarks
.gvfs
.ICEauthority
.kde
.licq
.local
.macromedia
.mission-control
.mozilla
.mplayer
.nv
.onboard
.pam_environment
.pki
.profile
.pulse
.pulse-cookie
.purple
.rpmdb
.sane
.scribus
.shotwell
.Skype
.thumbnails
.thunderbird
.Xauthority
.xsession-errors
.xsession-errors.old
antikor@antikor-System-Product-Name:~$


[heartsmagic]

.bashrc ve .profile dosyalarını geçmiştin sanırım buraya, görememiştim orada $PATH'e ait bir şey. Bir de ikinci bir göz bakarsa sanırım fena olmaz. Öteki türlü başka yerleri irdelememiz gerekebilir. Linux üzerinde bir değişkenin nereden geldiğini bulabildiğimiz bir yol varsa da ben bilmiyorum, bilen varsa paylaşırsa hem sevinir hem de yeni bir şey öğrenmiş oluruz.

[if]

Kod Seç Genişlet

uid=1000(antikor) gid=1000(antikor) gruplar=1000(antikor)
gid'in 100 olması gerek değil mi? Ubuntu'da olan biri daha id çıktısı aktarırsa karşılaştırabilirim.

Kod Seç Genişlet

cat /etc/environment

[warpalawas]

gid'in 100 olması gerek değil mi? Ubuntu'da olan biri daha id çıktısı aktarırsa karşılaştırabilirim.

Bununla ne demek istediniz anlayamadım. Başka bir Ubuntu yüklü bilgisayarın bu bilgilerini mi istiyorsunuz?

Kod Seç Genişlet


antikor@antikor-System-Product-Name:~$ cat /etc/environment
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
antikor@antikor-System-Product-Name:~$

[if]

gid 1000 imiş Ubuntu'da. Buraya takılmayın.

Yanlış bir şey görünmüyor.

Kod Seç Genişlet

which rfkill ifconfig iwconfig iwlist ne diyor?

[warpalawas]

Kod Seç Genişlet

antikor@antikor-System-Product-Name:~$ which rfkill ifconfig iwconfig iwlist
antikor@antikor-System-Product-Name:~$

Hİçbir şey yazmadı.

[if]

Kod Seç Genişlet

sudo find / -name rfkill ne diyor?

[warpalawas]

Kod Seç Genişlet

antikor@antikor-System-Product-Name:~$ antikor@antikor-System-Product-Name:~$ sudo find / -name rfkill
antikor@antikor-System-Product-Name:~$: komut bulunamadı
antikor@antikor-System-Product-Name:~$ [sudo] password for antikor:
[sudo]: komut bulunamadı
antikor@antikor-System-Product-Name:~$ /lib/modules/3.2.0-33-generic-pae/kernel/net/rfkill
bash: /lib/modules/3.2.0-33-generic-pae/kernel/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /lib/modules/3.2.0-39-generic-pae/kernel/net/rfkill
bash: /lib/modules/3.2.0-39-generic-pae/kernel/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /lib/modules/3.2.0-40-generic-pae/kernel/net/rfkill
bash: /lib/modules/3.2.0-40-generic-pae/kernel/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /lib/modules/3.2.0-32-generic-pae/kernel/net/rfkill
bash: /lib/modules/3.2.0-32-generic-pae/kernel/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /lib/modules/3.2.0-34-generic-pae/kernel/net/rfkill
bash: /lib/modules/3.2.0-34-generic-pae/kernel/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /lib/modules/3.2.0-38-generic-pae/kernel/net/rfkill
bash: /lib/modules/3.2.0-38-generic-pae/kernel/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /lib/modules/3.2.0-35-generic-pae/kernel/net/rfkill
bash: /lib/modules/3.2.0-35-generic-pae/kernel/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /lib/modules/3.2.0-29-generic-pae/kernel/net/rfkill
bash: /lib/modules/3.2.0-29-generic-pae/kernel/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /var/lib/rfkill
bash: /var/lib/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /etc/bash_completion.d/rfkill
bash: /etc/bash_completion.d/rfkill: Erişim engellendi
antikor@antikor-System-Product-Name:~$ /usr/sbin/rfkill
Usage: /usr/sbin/rfkill [options] command
Options:
--version show version (0.4-1ubuntu2 (Ubuntu))
Commands:
help
event
list [IDENTIFIER]
block IDENTIFIER
unblock IDENTIFIER
where IDENTIFIER is the index no. of an rfkill switch or one of:
<idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm
antikor@antikor-System-Product-Name:~$ /usr/share/doc/rfkill
bash: /usr/share/doc/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-33/net/rfkill
bash: /usr/src/linux-headers-3.2.0-33/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-33/ubuntu/rfkill
bash: /usr/src/linux-headers-3.2.0-33/ubuntu/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-38-generic-pae/include/config/rfkill
bash: /usr/src/linux-headers-3.2.0-38-generic-pae/include/config/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-33-generic-pae/include/config/rfkill
bash: /usr/src/linux-headers-3.2.0-33-generic-pae/include/config/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-34/net/rfkill
bash: /usr/src/linux-headers-3.2.0-34/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-34/ubuntu/rfkill
bash: /usr/src/linux-headers-3.2.0-34/ubuntu/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-32-generic-pae/include/config/rfkill
bash: /usr/src/linux-headers-3.2.0-32-generic-pae/include/config/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-34-generic-pae/include/config/rfkill
bash: /usr/src/linux-headers-3.2.0-34-generic-pae/include/config/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-35-generic-pae/include/config/rfkill
bash: /usr/src/linux-headers-3.2.0-35-generic-pae/include/config/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-40/net/rfkill
bash: /usr/src/linux-headers-3.2.0-40/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-40/ubuntu/rfkill
bash: /usr/src/linux-headers-3.2.0-40/ubuntu/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-35/net/rfkill
bash: /usr/src/linux-headers-3.2.0-35/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-35/ubuntu/rfkill
bash: /usr/src/linux-headers-3.2.0-35/ubuntu/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-39-generic-pae/include/config/rfkill
bash: /usr/src/linux-headers-3.2.0-39-generic-pae/include/config/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-32/net/rfkill
bash: /usr/src/linux-headers-3.2.0-32/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-32/ubuntu/rfkill
bash: /usr/src/linux-headers-3.2.0-32/ubuntu/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-39/net/rfkill
bash: /usr/src/linux-headers-3.2.0-39/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-39/ubuntu/rfkill
bash: /usr/src/linux-headers-3.2.0-39/ubuntu/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-40-generic-pae/include/config/rfkill
bash: /usr/src/linux-headers-3.2.0-40-generic-pae/include/config/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-38/net/rfkill
bash: /usr/src/linux-headers-3.2.0-38/net/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /usr/src/linux-headers-3.2.0-38/ubuntu/rfkill
bash: /usr/src/linux-headers-3.2.0-38/ubuntu/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /sys/devices/virtual/misc/rfkill
bash: /sys/devices/virtual/misc/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /sys/class/misc/rfkill
bash: /sys/class/misc/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /sys/class/rfkill
bash: /sys/class/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /sys/module/rfkill
bash: /sys/module/rfkill: Bir dizin
antikor@antikor-System-Product-Name:~$ /dev/rfkill
bash: /dev/rfkill: Erişim engellendi
antikor@antikor-System-Product-Name:~$


[if]

@warpalawas, verdiğim komutu kopyalayıp yapıştıracaktınız.

[warpalawas]

@ if
kopyalayıp yapıştırdım. Enter deyip çıktısını gönderdim. Yukarıda var. Önce yanlış yapmıştım. Daha doğrusu çıktıyı kopyalarken yarısını almamıştım, onu da ekledim.