[Çözüldü] Kablosuz Ağ Sorunsalı Ubuntu 12.10

[zuL4]

Diz üstü bilgisayarımda 12.10 sürümü var.
İlk kurduğumda sorunsuz kablosuz ağ bağlantısı oldu. Sonrasında da birkaç kez internete bağlandım ama bilgisayarı ikinci kez yeniden başlatınca artık ağı görmemeye başladı.
Sonra forumda ki benzer konulara baktım oradaki çözümleri denedim. En son artık ağı görüyor bağlanıyor, bir iki dakika sonra kopuyor veya yeniden şifre istiyor. Bunun içinde

Kod Seç Genişlet

sudo /etc/init.d/networking restart komutunu verdim. Bilgisayar takıldı kaldı, daha doğrusu masaüstü ikonları gitti ve terminalde herhangi bir şey yazamaz hale geldim.

Sadece kablosuz ağ bağlantısı olduğu için direkt ethernet bağlanıp buraya gerekli kod çıktılarını yazamıyorum bu şekilde yardım edebilecek var mı, mümkün mü?
Bilgisayarım: Lenovo ideapad z580

[if]

Çıktıları alalım: http://forum.ubuntu-tr.net/index.php?topic=28764.0

[heartsmagic]

Verdiğin komut ağı yeniden başlatmak için kullanılır, kısacası kalıcı etkisi olan bir komut değildir. Sorunun oturumu kapatıp yeniden giriş yapınca devam ediyor mu?

[zuL4]

Verdiğin komut ağı yeniden başlatmak için kullanılır, kısacası kalıcı etkisi olan bir komut değildir. Sorunun oturumu kapatıp yeniden giriş yapınca devam ediyor mu?

Tabiki devam ediyor. Yabancı bir linux forumunda benzer bir konu buldum pek anlayamamadım ama oradaki komutları da uyguladım olmadı. Sanırım broadcom ile ilgili bir sorun.

Zar zor aldığım çıktılar:

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.10
DISTRIB_CODENAME=quantal
DISTRIB_DESCRIPTION="Ubuntu 12.10"



Kod Seç Genişlet

Linux EmreLab 3.5.0-24-generic #37-Ubuntu SMP Thu Feb 7 01:50:30 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux



Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
04:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)


Kod Seç Genişlet

Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 003 Device 003: ID 1bcf:2c02 Sunplus Innovation Technology Inc.
Bus 003 Device 004: ID 0489:e032 Foxconn / Hon Hai
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Card reader



Kod Seç Genişlet

0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: ideapad_bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

*-network               
       description: Ethernet interface
       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 05
       serial: 08:9e:01:15:c6:00
       size: 10Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:43 ioport:2000(size=256) memory:f3804000-f3804fff memory:f3800000-f3803fff
  *-network UNCLAIMED
       description: Network controller
       product: BCM4313 802.11b/g/n Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:04:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress cap_list
       configuration: latency=0
       resources: memory:f3900000-f3903fff


Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 08:9e:01:15:c6:00 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:648 errors:0 dropped:0 overruns:0 frame:0
          TX packets:648 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:43216 (43.2 KB)  TX bytes:43216 (43.2 KB)


Kod Seç Genişlet

eth0      no wireless extensions.

lo        no wireless extensions.


Kod Seç Genişlet

eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.


Kod Seç Genişlet

Module                  Size  Used by
snd_hda_codec_hdmi     32049  1
snd_hda_codec_realtek    78147  1
rfcomm                 46620  12
bnep                   18141  2
parport_pc             32689  0
ppdev                  17074  0
nls_iso8859_1          12714  1
arc4                   12530  0
coretemp               13401  0
kvm                   414071  0
ghash_clmulni_intel    13221  0
aesni_intel            51038  0
cryptd                 20404  2 ghash_clmulni_intel,aesni_intel
aes_x86_64             17256  1 aesni_intel
rts5139               356200  0
uvcvideo               76750  0
videobuf2_core         32852  1 uvcvideo
videodev              120310  2 uvcvideo,videobuf2_core
btusb                  22475  0
videobuf2_vmalloc      12861  1 uvcvideo
videobuf2_memops       13405  1 videobuf2_vmalloc
bluetooth             209249  22 rfcomm,bnep,btusb
microcode              22804  0
ideapad_laptop         18087  0
sparse_keymap          13891  1 ideapad_laptop
snd_hda_intel          33492  3
snd_hda_codec         134213  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              17699  1 snd_hda_codec
snd_pcm                96668  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13325  0
snd_rawmidi            30513  1 snd_seq_midi
snd_seq_midi_event     14900  1 snd_seq_midi
snd_seq                61555  2 snd_seq_midi,snd_seq_midi_event
snd_timer              29426  2 snd_pcm,snd_seq
snd_seq_device         14498  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    78921  16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse                95595  0
joydev                 17458  0
serio_raw              13216  0
mac_hid                13206  0
nouveau               896008  1
soundcore              15048  1 snd
ttm                    83596  1 nouveau
mxm_wmi                13022  1 nouveau
lpc_ich                17062  0
snd_page_alloc         18485  2 snd_hda_intel,snd_pcm
i915                  520615  3
wmi                    19071  2 nouveau,mxm_wmi
mei                    40691  0
drm_kms_helper         49113  2 nouveau,i915
drm                   288721  7 nouveau,ttm,i915,drm_kms_helper
lp                     17760  0
i2c_algo_bit           13414  2 nouveau,i915
parport                46346  3 parport_pc,ppdev,lp
video                  19391  2 nouveau,i915
hid_generic            12541  0
usbhid                 46987  0
hid                   100411  2 hid_generic,usbhid
r8169                  61651  0


Kod Seç Genişlet


[    9.145745] Adding 6151164k swap on /dev/sda3.  Priority:-1 extents:1 across:6151164k
[    9.148865] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.198121] udevd[362]: starting version 175
[    9.229110] [drm] Initialized drm 1.1.0 20060810
[    9.231274] mei 0000:00:16.0: setting latency timer to 64
[    9.231330] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[    9.235153] wmi: Mapper loaded
[    9.237289] lp: driver loaded but no devices found
[    9.239882] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    9.239909] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    9.239912] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    9.239915] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[    9.240301] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1480a1)
[    9.242666] mei 0000:00:16.0: wd: failed to find the client
[    9.245070] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    9.254811] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    9.254815] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[    9.254874] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    9.254875] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[    9.305520] type=1400 audit(1361450624.896:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=418 comm="apparmor_parser"
[    9.305787] type=1400 audit(1361450624.896:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser"
[    9.305938] type=1400 audit(1361450624.896:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
[    9.378463] bcma: Found chip with id 0x4313, rev 0x01 and package 0x08
[    9.378499] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[    9.378526] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[    9.378592] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[    9.393197] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[    9.409568] Bluetooth: Core ver 2.16
[    9.409585] NET: Registered protocol family 31
[    9.409587] Bluetooth: HCI device and connection manager initialized
[    9.409589] Bluetooth: HCI socket layer initialized
[    9.409590] Bluetooth: L2CAP socket layer initialized
[    9.409598] Bluetooth: SCO socket layer initialized
[    9.410649] usbcore: registered new interface driver btusb
[    9.410775] Linux video capture interface: v2.00
[    9.411361] bcma: Bus registered
[    9.411621] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (1bcf:2c02)
[    9.412275] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    9.419846] scsi6 : SCSI emulation for RTS5139 USB card reader
[    9.420860] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    9.421708] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    9.423042] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    9.424809] usbcore: registered new interface driver rts5139
[    9.444247] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input7
[    9.444322] usbcore: registered new interface driver uvcvideo
[    9.444323] USB Video Class driver (1.1.1)
[    9.519490] cfg80211: Calling CRDA to update world regulatory domain
[    9.557244] Bluetooth: can't load firmware, may not work correctly
[    9.557331] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[    9.558434] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[    9.559353] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[    9.560252] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    9.564415] kvm: disabled by bios
[    9.578130] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[    9.593755] kvm: disabled by bios
[    9.638904] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    9.638907] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
[    9.638909] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    9.638911] [drm] nouveau 0000:01:00.0: Bios version 70.08.a8.00
[    9.638912] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    9.639142] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    9.639143] [drm] nouveau 0000:01:00.0: DCB version 4.0
[    9.639145] [drm] nouveau 0000:01:00.0: DCB outp 00: 02001300 00000000
[    9.639146] [drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
[    9.639159] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[    9.639161] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x7954
[    9.694419] kvm: disabled by bios
[    9.699514] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7FB0
[    9.726345] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x9245
[    9.726351] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x9249
[    9.726407] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x9350
[    9.726408] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x93B5
[    9.748471] [TTM] Zone  kernel: Available graphics memory: 2986918 kiB
[    9.748473] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    9.748474] [TTM] Initializing pool allocator
[    9.748476] [TTM] Initializing DMA pool allocator
[    9.748484] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3)
[    9.748489] mtrr: no more MTRRs available
[    9.748496] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    9.753382] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.753383] [drm] No driver support for vblank timestamp query.
[    9.753384] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[    9.753386] [drm] nouveau 0000:01:00.0: voltage table 0x50 unknown
[    9.758745] [drm] nouveau 0000:01:00.0: 2 available performance level(s)
[    9.758747] [drm] nouveau 0000:01:00.0: 1: core 270MHz shader 540MHz memory 405MHz
[    9.758749] [drm] nouveau 0000:01:00.0: 3: core 475MHz shader 950MHz memory 900MHz voltage 10mV
[    9.758750] [drm] nouveau 0000:01:00.0: c: core 270MHz shader 540MHz memory 405MHz
[    9.763001] [drm] nouveau 0000:01:00.0: MM: using COPY1 for buffer copies
[    9.809088] cfg80211: World regulatory domain updated:
[    9.809090] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.809092] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.809094] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.809096] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.809097] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.809099] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.837403] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x120000, bo ffff8801a5c9d000
[    9.837519] [drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling
[    9.854579] Console: switching to colour frame buffer device 128x48
[    9.855636] fb0: nouveaufb frame buffer device
[    9.855637] drm: registered panic notifier
[    9.855640] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[    9.855882] i915 0000:00:02.0: setting latency timer to 64
[    9.856343] pci 0000:00:00.0: Intel Ivybridge Chipset
[    9.856420] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    9.857250] pci 0000:00:00.0: detected 65536K stolen memory
[    9.884525] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    9.884533] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.884534] [drm] Driver supports precise vblank timestamp query.
[    9.884635] vga_switcheroo: enabled
[    9.884999] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[    9.885001] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    9.898052] Broadcom 43xx driver loaded [ Features: PNL ]
[    9.915251] kvm: disabled by bios
[    9.916749] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 18
[   10.012573] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   10.012576] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012577] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   10.012578] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012579] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   10.012580] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012581] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   10.012582] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012583] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   10.012584] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012584] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   10.012585] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012586] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   10.012587] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012588] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   10.012589] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012590] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   10.012591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012591] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   10.012592] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012593] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   10.012594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   10.012595] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   10.012596] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
[   10.012597] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   10.012598] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
[   10.012599] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   10.012625] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   10.058155] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.224250] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x840300/0x123c00
[   10.266075] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   10.370286] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   10.546537] fbcon: inteldrmfb (fb1) is primary device
[   10.546540] fbcon: Remapping primary device, fb1, to tty 1-63
[   10.681163] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   10.797385] init: failsafe main process (928) killed by TERM signal
[   10.894782] ppdev: user-space parallel port driver
[   10.913907] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.913908] Bluetooth: BNEP filters: protocol multicast
[   10.915879] Bluetooth: RFCOMM TTY layer initialized
[   10.915881] Bluetooth: RFCOMM socket layer initialized
[   10.915882] Bluetooth: RFCOMM ver 1.11
[   10.929000] fb1: inteldrmfb frame buffer device
[   10.929239] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   10.950017] acpi device:43: registered as cooling_device4
[   10.950191] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   10.950779] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:41/LNXVIDEO:00/input/input10
[   10.951854] type=1400 audit(1361450626.544:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=993 comm="apparmor_parser"
[   10.952329] type=1400 audit(1361450626.544:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=993 comm="apparmor_parser"
[   10.957027] acpi device:50: registered as cooling_device5
[   10.957207] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.957775] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
[   10.960950] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[   10.961964] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   10.961971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.961974] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   10.961977] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   10.961980] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.961984] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   10.961988] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[   10.961991] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.961993] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.962242] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   11.199476] type=1400 audit(1361450626.792:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1036 comm="apparmor_parser"
[   11.199563] type=1400 audit(1361450626.792:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1035 comm="apparmor_parser"
[   11.199651] type=1400 audit(1361450626.792:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1037 comm="apparmor_parser"
[   11.199717] type=1400 audit(1361450626.792:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1036 comm="apparmor_parser"
[   11.199838] type=1400 audit(1361450626.792:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1035 comm="apparmor_parser"
[   11.221608] r8169 0000:03:00.0: eth0: link down
[   11.222059] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.222282] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.276355] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   11.276367] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[   11.277721] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.278691] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.316021] init: alsa-restore main process (1079) terminated with status 19
[   11.466127] init: anacron main process (1132) killed by TERM signal
[   11.514629] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.514694] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.514739] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.750826] [drm] nouveau 0000:01:00.0: 906e not supported yet
[   11.881866] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 0 with no TDs queued?
[   12.037072] init: plymouth-stop pre-start process (1345) terminated with status 1
[   14.075354] wlan0: authenticate with 18:28:61:3b:0e:2a
[   14.079376] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   14.282678] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   14.486446] wlan0: send auth to 18:28:61:3b:0e:2a (try 3/3)
[   14.690147] wlan0: authentication with 18:28:61:3b:0e:2a timed out
[   21.521845] wlan0: authenticate with 18:28:61:3b:0e:2a
[   21.523654] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   21.725068] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   21.928811] wlan0: send auth to 18:28:61:3b:0e:2a (try 3/3)
[   21.930462] wlan0: authenticated
[   21.932776] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   22.136546] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   22.340237] wlan0: associate with 18:28:61:3b:0e:2a (try 3/3)
[   22.357206] wlan0: RX AssocResp from 18:28:61:3b:0e:2a (capab=0x411 status=0 aid=2)
[   22.357910] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   22.357915] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   22.357917] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   22.357924] wlan0: associated
[   22.358558] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.921668] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   24.921676] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[   24.921677] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   24.922241] cfg80211: All devices are disconnected, going to restore regulatory settings
[   24.922244] cfg80211: Restoring regulatory settings
[   24.922246] cfg80211: Calling CRDA to update world regulatory domain
[   24.924660] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   24.924663] cfg80211: World regulatory domain updated:
[   24.924664] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.924665] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.924667] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.924668] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.924669] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.924670] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.884254] wlan0: authenticate with 18:28:61:3b:0e:2a
[   25.886014] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   26.087428] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   26.094208] wlan0: authenticated
[   26.095482] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   26.299110] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   26.502851] wlan0: associate with 18:28:61:3b:0e:2a (try 3/3)
[   26.706626] wlan0: association with 18:28:61:3b:0e:2a timed out
[   27.669965] wlan0: authenticate with 18:28:61:3b:0e:2a
[   27.671688] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   27.873077] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   27.882689] wlan0: authenticated
[   27.885085] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   28.088831] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   28.102322] wlan0: RX AssocResp from 18:28:61:3b:0e:2a (capab=0x411 status=0 aid=2)
[   28.102816] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   28.102819] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   28.102821] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   28.102826] wlan0: associated
[   30.913219] wlan0: deauthenticated from 18:28:61:3b:0e:2a (Reason: 7)
[   30.913411] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   30.913420] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[   30.913423] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   30.914419] cfg80211: All devices are disconnected, going to restore regulatory settings
[   30.914425] cfg80211: Restoring regulatory settings
[   30.914430] cfg80211: Calling CRDA to update world regulatory domain
[   30.916977] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   30.916982] cfg80211: World regulatory domain updated:
[   30.916983] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   30.916984] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.916986] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   30.916987] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   30.916988] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.916989] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   31.876713] wlan0: authenticate with 18:28:61:3b:0e:2a
[   31.878238] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   32.079670] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   32.088236] wlan0: authenticated
[   32.091619] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   32.295466] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   32.306109] wlan0: RX AssocResp from 18:28:61:3b:0e:2a (capab=0x411 status=0 aid=2)
[   32.306581] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   32.306585] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   32.306586] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   32.306592] wlan0: associated
[   34.892755] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   34.892762] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[   34.892764] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   34.893357] cfg80211: All devices are disconnected, going to restore regulatory settings
[   34.893360] cfg80211: Restoring regulatory settings
[   34.893362] cfg80211: Calling CRDA to update world regulatory domain
[   34.895770] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   34.895774] cfg80211: World regulatory domain updated:
[   34.895776] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   34.895778] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.895780] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   34.895782] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   34.895783] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   34.895785] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   35.855445] wlan0: authenticate with 18:28:61:3b:0e:2a
[   35.857106] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   36.058480] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   36.067841] wlan0: authenticated
[   36.070559] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   36.274196] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   36.289507] wlan0: RX AssocResp from 18:28:61:3b:0e:2a (capab=0x411 status=0 aid=2)
[   36.290155] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   36.290159] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   36.290160] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   36.290165] wlan0: associated
[   38.067175] wlan0: deauthenticating from 18:28:61:3b:0e:2a by local choice (reason=3)
[   38.079998] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   38.080004] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[   38.080006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   38.081473] cfg80211: All devices are disconnected, going to restore regulatory settings
[   38.081478] cfg80211: Restoring regulatory settings
[   38.081481] cfg80211: Calling CRDA to update world regulatory domain
[   38.083764] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   38.083768] cfg80211: World regulatory domain updated:
[   38.083768] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   38.083770] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.083771] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.083772] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.083773] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.083774] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   40.146426] ideapad_laptop: Unknown event: 1
[   45.570734] wlan0: authenticate with 18:28:61:3b:0e:2a
[   45.572477] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   45.580426] wlan0: authenticated
[   45.582222] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   45.785927] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   45.796560] wlan0: RX AssocResp from 18:28:61:3b:0e:2a (capab=0x411 status=0 aid=2)
[   45.797095] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   45.797098] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   45.797099] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   45.797104] wlan0: associated
[   47.879242] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   47.879250] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[   47.879253] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   47.879828] cfg80211: All devices are disconnected, going to restore regulatory settings
[   47.879831] cfg80211: Restoring regulatory settings
[   47.879834] cfg80211: Calling CRDA to update world regulatory domain
[   47.882437] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   47.882441] cfg80211: World regulatory domain updated:
[   47.882442] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   47.882443] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   47.882445] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   47.882446] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   47.882447] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   47.882448] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   48.842496] wlan0: authenticate with 18:28:61:3b:0e:2a
[   48.844268] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   49.045665] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   49.051861] wlan0: authenticated
[   49.053764] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   49.257431] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   49.461163] wlan0: associate with 18:28:61:3b:0e:2a (try 3/3)
[   49.477054] wlan0: RX AssocResp from 18:28:61:3b:0e:2a (capab=0x411 status=0 aid=2)
[   49.477740] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   49.477744] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   49.477745] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   49.477751] wlan0: associated
[   51.886033] wlan0: deauthenticated from 18:28:61:3b:0e:2a (Reason: 7)
[   51.886180] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   51.886190] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[   51.886193] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   51.887156] cfg80211: All devices are disconnected, going to restore regulatory settings
[   51.887160] cfg80211: Restoring regulatory settings
[   51.887163] cfg80211: Calling CRDA to update world regulatory domain
[   51.889495] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   51.889499] cfg80211: World regulatory domain updated:
[   51.889500] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   51.889501] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   51.889502] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   51.889503] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   51.889504] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   51.889505] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   52.849387] wlan0: authenticate with 18:28:61:3b:0e:2a
[   52.851071] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   53.052520] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   53.256260] wlan0: send auth to 18:28:61:3b:0e:2a (try 3/3)
[   53.459950] wlan0: authentication with 18:28:61:3b:0e:2a timed out
[   54.423120] wlan0: authenticate with 18:28:61:3b:0e:2a
[   54.424987] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   54.626480] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   54.634124] wlan0: authenticated
[   54.634454] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   54.838189] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   54.844668] wlan0: RX AssocResp from 18:28:61:3b:0e:2a (capab=0x411 status=0 aid=2)
[   54.848865] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   54.848869] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   54.848870] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   54.848874] wlan0: associated
[   57.866402] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   57.866411] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[   57.866413] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   57.867003] cfg80211: All devices are disconnected, going to restore regulatory settings
[   57.867005] cfg80211: Restoring regulatory settings
[   57.867008] cfg80211: Calling CRDA to update world regulatory domain
[   57.869469] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   57.869473] cfg80211: World regulatory domain updated:
[   57.869474] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   57.869475] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   57.869476] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   57.869477] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   57.869478] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   57.869479] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   58.829397] wlan0: authenticate with 18:28:61:3b:0e:2a
[   58.831291] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   59.032762] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   59.236516] wlan0: send auth to 18:28:61:3b:0e:2a (try 3/3)
[   59.272669] wlan0: authenticated
[   59.276428] wlan0: associate with 18:28:61:3b:0e:2a (try 1/3)
[   59.480201] wlan0: associate with 18:28:61:3b:0e:2a (try 2/3)
[   59.683896] wlan0: associate with 18:28:61:3b:0e:2a (try 3/3)
[   59.686481] wlan0: RX AssocResp from 18:28:61:3b:0e:2a (capab=0x411 status=0 aid=2)
[   59.686956] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[   59.686960] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   59.686961] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   59.686967] wlan0: associated
[   61.873917] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[   61.873924] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
[   61.873925] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   61.874500] cfg80211: All devices are disconnected, going to restore regulatory settings
[   61.874503] cfg80211: Restoring regulatory settings
[   61.874505] cfg80211: Calling CRDA to update world regulatory domain
[   61.876914] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   61.876917] cfg80211: World regulatory domain updated:
[   61.876918] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   61.876920] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.876921] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   61.876922] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   61.876923] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.876924] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.403794] ideapad_laptop: Unknown event: 1
[   62.840451] wlan0: authenticate with 18:28:61:3b:0e:2a
[   62.842180] wlan0: send auth to 18:28:61:3b:0e:2a (try 1/3)
[   63.043565] wlan0: send auth to 18:28:61:3b:0e:2a (try 2/3)
[   63.247313] wlan0: send auth to 18:28:61:3b:0e:2a (try 3/3)
[   63.451017] wlan0: authentication with 18:28:61:3b:0e:2a timed out
[   84.663505] ideapad_laptop: Unknown event: 1
[  106.917940] ideapad_laptop: Unknown event: 1
[  129.179278] ideapad_laptop: Unknown event: 1
[  151.485322] ideapad_laptop: Unknown event: 1
[  173.806280] ideapad_laptop: Unknown event: 1
[  196.085407] ideapad_laptop: Unknown event: 1
[  218.648784] ideapad_laptop: Unknown event: 1
[  240.997579] ideapad_laptop: Unknown event: 1
[  263.475480] ideapad_laptop: Unknown event: 1
[  285.834263] ideapad_laptop: Unknown event: 1
[  308.194682] ideapad_laptop: Unknown event: 1
[  330.526745] ideapad_laptop: Unknown event: 1
[  352.894951] ideapad_laptop: Unknown event: 1
[  375.198076] ideapad_laptop: Unknown event: 1
[  397.536026] ideapad_laptop: Unknown event: 1
[  417.640772] init: network-manager main process (983) killed by KILL signal
[  419.926871] ideapad_laptop: Unknown event: 1
[  442.204382] ideapad_laptop: Unknown event: 1
[  464.475332] ideapad_laptop: Unknown event: 1
[  486.846138] ideapad_laptop: Unknown event: 1
[  509.217026] ideapad_laptop: Unknown event: 1
[  531.476996] ideapad_laptop: Unknown event: 1
[  553.742595] ideapad_laptop: Unknown event: 1
[  576.004339] ideapad_laptop: Unknown event: 1
[  598.270040] ideapad_laptop: Unknown event: 1
[  620.539074] ideapad_laptop: Unknown event: 1
[  642.792146] ideapad_laptop: Unknown event: 1
[  665.060568] ideapad_laptop: Unknown event: 1
[  687.325839] ideapad_laptop: Unknown event: 1
[  709.583790] ideapad_laptop: Unknown event: 1
[  731.845015] ideapad_laptop: Unknown event: 1
[  754.103024] ideapad_laptop: Unknown event: 1
[  776.371783] ideapad_laptop: Unknown event: 1
[  798.644067] ideapad_laptop: Unknown event: 1
[  820.902333] ideapad_laptop: Unknown event: 1
[  843.196754] ideapad_laptop: Unknown event: 1
[  865.543525] ideapad_laptop: Unknown event: 1
[  887.898034] ideapad_laptop: Unknown event: 1
[  910.234162] ideapad_laptop: Unknown event: 1
[  932.589168] ideapad_laptop: Unknown event: 1
[  954.849377] ideapad_laptop: Unknown event: 1
[  977.113328] ideapad_laptop: Unknown event: 1
[  999.381377] ideapad_laptop: Unknown event: 1
[ 1021.652209] ideapad_laptop: Unknown event: 1
[ 1043.915103] ideapad_laptop: Unknown event: 1
[ 1066.189381] ideapad_laptop: Unknown event: 1
[ 1088.463048] ideapad_laptop: Unknown event: 1
[ 1110.735729] ideapad_laptop: Unknown event: 1
[ 1133.121939] ideapad_laptop: Unknown event: 1
[ 1155.398542] ideapad_laptop: Unknown event: 1
[ 1177.840003] ideapad_laptop: Unknown event: 1
[ 1200.199212] ideapad_laptop: Unknown event: 1
[ 1222.516222] ideapad_laptop: Unknown event: 1
[ 1244.932697] ideapad_laptop: Unknown event: 1
[ 1267.290113] ideapad_laptop: Unknown event: 1
[ 1289.664331] ideapad_laptop: Unknown event: 1
[ 1311.998743] ideapad_laptop: Unknown event: 1
[ 1334.338038] ideapad_laptop: Unknown event: 1
[ 1356.695377] ideapad_laptop: Unknown event: 1
[ 1379.005391] ideapad_laptop: Unknown event: 1
[ 1401.339837] ideapad_laptop: Unknown event: 1
[ 1423.687987] ideapad_laptop: Unknown event: 1
[ 1445.988041] ideapad_laptop: Unknown event: 1
[ 1468.313171] ideapad_laptop: Unknown event: 1
[ 1490.669091] ideapad_laptop: Unknown event: 1
[ 1513.029787] ideapad_laptop: Unknown event: 1
[ 1535.348182] ideapad_laptop: Unknown event: 1
[ 1557.628917] ideapad_laptop: Unknown event: 1
[ 1602.192142] ideapad_laptop: Unknown event: 1
[ 1624.459983] ideapad_laptop: Unknown event: 1




Kod Seç Genişlet

[ 1513.029787] ideapad_laptop: Unknown event: 1
[ 1535.348182] ideapad_laptop: Unknown event: 1
[ 1557.628917] ideapad_laptop: Unknown event: 1
[ 1602.192142] ideapad_laptop: Unknown event: 1
[ 1624.459983] ideapad_laptop: Unknown event: 1
[ 1646.748681] ideapad_laptop: Unknown event: 1
[ 1669.015195] ideapad_laptop: Unknown event: 1
[ 1691.322595] ideapad_laptop: Unknown event: 1
[ 1713.654973] ideapad_laptop: Unknown event: 1
[ 1735.951372] ideapad_laptop: Unknown event: 1



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 21 Şubat 2013 - 16:14:55
Flood(Türkçe karşılık bulamadım) olacak ama önceki mesajımda bahsettiğim forum linki: http://ubuntuforums.org/showthread.php?t=2092561 bu.
Üçünçü mesajda verilen kodu denemiştim olmadı. Sonra oradaki moderatörün verdiği linke baktım pek bir şey anlamadım. Paylaşma gereksinimi duydum belki benim problemime de çözüm olur. Bir el atarsanız

[if]

@zuL4, http://forum.ubuntu-tr.net/index.php?topic=37276.msg448310#msg448310

Kablo ile bağlı olmanız gerek.

[zuL4]

@if ethernet kablosu ile bağlanıp sonra neler yapacağım yazar mısınız? Tam olarak orada ct'nin dediklerini mi yapacağım? Sil, tekrar yükle vs.

[if]

@zuL4, Yazılım Kaynaklarını açın, Ek sürücüler bölümünde Broadcom STA diye bir şey geçiyor mu?

[zuL4]

Broadcom diye bir şey var.
Seçili olmayan seçenekte ise şöyle yazıyor Using Broadcom 802.11 Linux STA wireless driver... .... from bcmwl-kernel-source

[if]

@zuL4, onu işaretleyip kurun ve sitemin yeniden başlatın. Bundan sonra bağlanabiliyor olmanız gerek.

[zuL4]

@if üstad dediğin şekilde yaptım yine aynı sorun var. O seçeneği işaretledim, sonra @ct'nin komutlarını yazdım daha sonra yeniden başlattım. Şifre sorup duruyor!

[if]

Nerede şifre soruyor @zuL4?

Kod Seç Genişlet

dpkg -l | grep b43
sudo lshw -c network
iwconfig çıktılarına da bakayım.

[zuL4]

İşte ağa bağlanmaya çalıştığımda şifre soruyor. Şifreyi giriyorum, bağlanmıyor. Sürekli öyle yapıyor.

Kod Seç Genişlet

ii  b43-fwcutter                              1:015-14                                  amd64        Utility for extracting Broadcom 43xx firmware
ii  firmware-b43-installer                    1:015-14                                  all          Installer package for firmware for the b43 driver


Kod Seç Genişlet


*-network               
       description: Ethernet interface
       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 05
       serial: 08:9e:01:15:c6:00
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.129 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:43 ioport:2000(size=256) memory:f3804000-f3804fff memory:f3800000-f3803fff
  *-network
       description: Network controller
       product: BCM4313 802.11b/g/n Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:04:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=bcma-pci-bridge latency=0
       resources: irq:18 memory:f3900000-f3903fff
  *-network
       description: Wireless interface
       physical id: 3
       logical name: wlan0
       serial: 08:ed:b9:a5:24:99
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=brcmsmac driverversion=3.5.0-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn



Kod Seç Genişlet

eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=19 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off


[if]

@zuL4, ilk defa bağlandığınız için önce kullanıcı şifrenizi girmeniz gerek, sonra ağın şifresini giriyorsunuz.

[zuL4]

@if valla ben bu işi çözemedim. Yine olmuyor. 2dk duruyor sonra  tekrar şifre istiyor. Son olarak önerdiğin bir çözüm var mı?

[if]

@zuL4,

Kod Seç Genişlet

sudo modprobe -r brcmsmac bcma-pci-bridge
sudo modprobe b43
komutundan sonra tekrar bağlanmayı deneyin. Bir de

Kod Seç Genişlet

cat /etc/modules çıktısını göreyim.

[zuL4]

Verdiğin ilk iki komuttan ilkinde hata verdi o modülü bulamadı. Diğer komutta herhangi bir işlem yapmadı.

Son verdiğin komut:

Kod Seç Genişlet

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

loop
lp
rtc
b43
b43


[if]

@zuL4,

Kod Seç Genişlet

gksu gedit /etc/modules dosyasını açın ve sondaki b43 satırlarını silin, kaydedin dosyayı.

Kod Seç Genişlet

sudo apt-get purge b43-fwcutter firmware-b43-installer
sudo apt-get autoremove
sudo apt-get update
sudo apt-get --reinstall install bcmwl-kernel-source
sudo modprobe -r b43 ssb wl brcmfmac brcmsmac bcma
sudo modprobe wl komutlarından sonra bir kaç saniye bekleyin, sonra tekrar bağlanmaya çalışın.

[zuL4]

@if çok sağolasın ben iki gündür uğraşıyorum sen saatlerdir uğraşıyon yine de çözümü bulamadık. Kesin hata bendedir yani denemedik yol kalmadı. Yapacak bir şey yok tekrar sıfırdan windows kuracağım artık. Gerçi yabancı bir forumda bir yöntem daha gördüm onu da deneyeceğim içimde kalmasın

[if]

@zuL4, yeniden başlatınca

Kod Seç Genişlet

lspci -knn | grep -A2 Net
lsmod
iwconfig
iwlist scanning


çıktılarını tekrar geçer misiniz?

[zuL4]

@if Artık kablosuz ağı da görmüyor, yani bağlantılarda yok. Network Connections'un Wireless sekmesinde bağlantım gözüküyor öyle.

Kod Seç Genişlet

04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Broadcom Corporation Device [14e4:0587]
Kernel modules: bcma


Kod Seç Genişlet

Module                  Size  Used by
snd_hda_codec_hdmi     32049  1
snd_hda_codec_realtek    78147  1
parport_pc             32689  0
ppdev                  17074  0
rfcomm                 46620  12
bnep                   18141  2
nls_iso8859_1          12714  1
joydev                 17458  0
ideapad_laptop         18087  0
sparse_keymap          13891  1 ideapad_laptop
coretemp               13401  0
snd_hda_intel          33492  3
snd_hda_codec         134213  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              17699  1 snd_hda_codec
snd_pcm                96668  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
kvm                   414071  0
wmi                    19071  0
ghash_clmulni_intel    13221  0
aesni_intel            51038  0
cryptd                 20404  2 ghash_clmulni_intel,aesni_intel
snd_seq_midi           13325  0
aes_x86_64             17256  1 aesni_intel
snd_rawmidi            30513  1 snd_seq_midi
snd_seq_midi_event     14900  1 snd_seq_midi
snd_seq                61555  2 snd_seq_midi,snd_seq_midi_event
psmouse                95595  0
microcode              22804  0
snd_timer              29426  2 snd_pcm,snd_seq
snd_seq_device         14498  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    78921  16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
rts5139               356200  0
btusb                  22475  0
bluetooth             209249  22 rfcomm,bnep,btusb
soundcore              15048  1 snd
serio_raw              13216  0
i915                  520615  3
drm_kms_helper         49113  1 i915
uvcvideo               76750  0
videobuf2_core         32852  1 uvcvideo
videodev              120310  2 uvcvideo,videobuf2_core
videobuf2_vmalloc      12861  1 uvcvideo
videobuf2_memops       13405  1 videobuf2_vmalloc
mei                    40691  0
mac_hid                13206  0
snd_page_alloc         18485  2 snd_hda_intel,snd_pcm
drm                   288721  4 i915,drm_kms_helper
lpc_ich                17062  0
i2c_algo_bit           13414  1 i915
video                  19391  1 i915
lp                     17760  0
parport                46346  3 parport_pc,ppdev,lp
hid_generic            12541  0
usbhid                 46987  0
hid                   100411  2 hid_generic,usbhid
r8169                  61651  0


Kod Seç Genişlet

eth0      no wireless extensions.

lo        no wireless extensions.

Kod Seç Genişlet

eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.


[if]

@zuL4, bir şekilde gerekli modül yüklenmemiş.

Kod Seç Genişlet

ls /etc/modprobe.d/
cat /etc/modprobe.d/blacklist.conf
sudo modprobe -r bcma
sudo modprobe wl çıktılarına bakaım.

[zuL4]

Kod Seç Genişlet

alsa-base.conf              blacklist-rare-network.conf
blacklist-ath_pci.conf      blacklist-watchdog.conf
blacklist-bcm43.conf        bumblebee.conf
blacklist.conf              dkms.conf
blacklist-firewire.conf     iwlwifi.conf
blacklist-framebuffer.conf  nvidia-current_hybrid.conf
blacklist-modem.conf        vmwgfx-fbdev.conf
blacklist-oss.conf


Kod Seç Genişlet

# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
blacklist acer_wmi


Daha öncede demiştim son iki komutta herhangi bir işlem yapmıyor diye. 3.komutta bir işlem yapmadı.
Son komut çıktısı da böyle:

Kod Seç Genişlet

FATAL: Module wl not found.


[if]

@zuL4, kara listeye alma dizinindeki kimi dosyaları siz oluşturmuş gibisiniz. blacklist-bcm43.conf, blacklist-ath_pci.conf, blacklist-rare-network.conf, iwlwifi.conf içerikleriyle

Kod Seç Genişlet

sudo modprobe -r bcma
sudo modprobe wl0 çıktılarını alayım.

[zuL4]

@if ben her türlü yöntemi denedim neredeyse ondan dolayı ben almış olabilirim. Ama genel olarak sizin bu konuda verdiğiniz talimatları uyguladım.
İlk komut herhangi bir işlem yapmadı.
İkinci komut:

Kod Seç Genişlet

FATAL: Module wl0 not found.


[if]

@zuL4, o dosyaların içeriğini görsem iyi olur.

Sizin kartınız için şu yazıyor[1]

wl - Proprietary Broadcom STA Wireless driver

    For Chip ID BCM4311, BCM4312, BCM4313, BCM4321, BCM4322, BCM43224, BCM43225, BCM43227 and BCM43228.

        Install either bcmwl-kernel-source (instructions below) OR the broadcom-sta (instructions at http://wiki.debian.org/wl) packages.

Kod Seç Genişlet

brcmsmac (a.k.a brcm80211) - Open source driver from Broadcom (merged into kernel 2.6.37)

    For Chip ID BCM4313, BCM43224 and BCM43225.

Kod Seç Genişlet

dpkg -l | grep -E "broadcom|bcmwl" çıktısına bakayım.