[Çözüldü] Ağ kartım tanınmıyor

[aksarayli]

Ubuntu'da kuruluma başlamadan önce internet bağlantısı gerçekleşmiyor. Kurulum yaptıktan sonra driverlar yüklü olmayacak ve ben driverları yüklemek konusunda tedirginim bunun için ubuntu kurmuyorum. Driver konusunda sıkıntı yaşar mıyım ? Elimde driver cd si mevcut, kolaylıkla kurulum yapabilir miyim ?

[if]

@aksarayli, öncelikle "driver" değil sürücü derseniz memnun olurum.

Kablosuz kartın ne olduğu bilmeden bir şey diyemeyiz.

Kod Seç Genişlet

lspci | grep Network çıktısına bakayım.

[aksarayli]

hocam kablosuz kart değil kablolu kullanıyorum. benim öğrenmek istediğim asıl şey windowsta olduğu gibi sürücüleri cd den kolaylıkla yükleyebilir miyim ? windowsu kaldırıp linux kurmayı düşünüyorum ama linux kurup zorda kalmayı da istemiyorum. ubuntu cd sini takıp ubuntuyu dene diyince internete bağlı olmuyor demek ki ubuntu sürücüyü tanımıyor internete bağlı olmadığıma göre ubuntuya sürücüyü nasıl tanıtacağım bunun bilgisini önceden almam gerek

[if]

@aksarayli, elinizde cd ile Ubuntu'ya sürücü kurulumu gerçekleştirme ihtimaliniz var ama gerek kalmaz. Canlı cd/usb üzerindeyken ağa bağlanmak için sağ üst köşedeki ağ simgesine tıklayıp kendi ağınızı seçtiniz mi?

[aksarayli]

evet seçmeye çalıştım ancak başarılı olamadım disconected falan bir şeyler yazıyordu

[matrax_41]

Ubuntu'yu cd ile açtıktan sonra aşağıda vereceğim bağlantıdaki komutları girip çıktılarını buraya aktar.

http://forum.ubuntu-tr.net/index.php?topic=28764.0

[aksarayli]

Bendeki cd ile sürücüleri rahatça yükleyebileceksem bence hiç uğraşmadan Ubuntu'yu kuruyum

[matrax_41]

Elindeki cd'deki sürücüler windows için yazılması nedeniyle kullanamazsın. Tabi bir çözümü yok anlamına gelmiyor. Ubuntu cd'si ile açtıktan sonra verdiğim bağlantıdaki çıktıları geç buraya bir bakalım. Ubuntu'yu, Windows'un yanına kuracaksan direk kurabilirsin. Sorun olduğundan Windows ile bağlanıp geçersin sorunu buraya.

[aksarayli]

Yok hocam Windows'u kaldıracağım ben çıktıları aldığımda buraya yazarım ilginiz için çok teşekkür ederim

[aksarayli]

ağ kartım Atheros AR8161/8165 ve araştırdığımda lenovo marka bilgisayarların sürücülerinin linux versiyonları olmadığını öğrendim linux yükleyince sıkıntı olur mu ? linuxun kendi açık kaynak sürücüleri oluyormuş onları bilgisayarımın desteklemesi mümkün mü ?

[matrax_41]

Lenovo bilgisayar sürücüleri  yok diye bir şey yok. Lenovo'nun ürettiği özel bir donanım hariç tabi. Senin ethernet kontrolcün için aşağıda vereceğin bağlantıda çözümü var.

http://askubuntu.com/questions/165192/how-do-i-install-drivers-for-the-atheros-ar8161-ethernet-controller

[aksarayli]

Ben şimdilik Ubuntu'yu Windows'un yanına kuruyorum o zaman. Verdiğiniz kaynaktaki bilgilerden hiçbir şey anlamadım. Linkte indirmem gereken bir dosya yok sürücü kurulumunu nasıl yapacağım internet bağlantısı da yok terminale komut girsem nasıl olacak gerçekten kafam çok karıştı

[bytan]

@aksarayli,

Neden kafan karıştı? Basitçe @matrax_41'in seni yönlendirdiği başlıktaki komutları sırasıyla uçbirime (terminal) yazıp döndürdüklerini buraya aktaracaksın. Yeni bir sisteme geçtiğinin bilincinde olarak sistemi tanımak için kendine zaman tanımalı ve bol bol okumalısın. Başlangıçta okumak için ayıracağın ufak bir zaman, kullanım sırasında sana çok fayda sağlar. Acemiler için ilk durak bölümümüz de ilk adımların için sana yardımcı olacaktır.

Windows'un yanına kuruyorum derken kastettiğin nedir? Wubi olarak mı kurulum yapıyorsun yoksa sabit diske tam kurulum mu yapıyorsun?

[heartsmagic]

Ayrıca belki yabancı bir kaynağa gitmemize bile gerek kalmayacak. Şu iletiyi göz önünde bulundursak meselâ?
http://forum.ubuntu-tr.net/index.php?topic=38102.msg457511#msg457511

Kısacası @matrax_41 yol göstermek istiyor fakat sen çıktıları aktarmıyorsun. Öncesinde @if de bir çıktı istemiş. Onları görebilsek belki bizim forumda olan bir öneriyi de sana aktarabiliriz. Anlamadığın yerlerde de yardımcı olmaya çalışırız. Fakat öncelikle önerileri yerine getirmeye çalış lütfen.

[aksarayli]

Kod Seç Genişlet

cat /etc/lsb-release




DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.10
DISTRIB_CODENAME=quantal
DISTRIB_DESCRIPTION="Ubuntu 12.10"








uname -a


Linux ubuntu 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 i686 i686 i686 GNU/Linux








lspci




00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)










lsusb






Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) 64MB QDI U2 DISK
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f3:0234 Elan Microelectronics Corp.
Bus 001 Device 004: ID 0489:e032 Foxconn / Hon Hai
Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd










rfkill list


0: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: ideapad_bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no








sudo lshw -C network






*-network UNCLAIMED     
       description: Ethernet controller
       product: AR8161 Gigabit Ethernet
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:01:00.0
       version: 10
       width: 64 bits
       clock: 33MHz
       capabilities: pm pciexpress msi msix bus_master cap_list
       configuration: latency=0
       resources: memory:90500000-9053ffff ioport:2000(size=128)
  *-network
       description: Network controller
       product: BCM4313 802.11b/g/n Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=bcma-pci-bridge latency=0
       resources: irq:17 memory:90400000-90403fff
  *-network
       description: Wireless interface
       physical id: 3
       logical name: wlan0
       serial: c0:14:3d:d2:af:23
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=brcmsmac driverversion=3.5.0-17-generic firmware=N/A *bağlantı=no multicast=yes wireless=IEEE 802.11bgn








ifconfig


lo        *bağlantı encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:432 errors:0 dropped:0 overruns:0 frame:0
          TX packets:432 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:33744 (33.7 KB)  TX bytes:33744 (33.7 KB)


wlan0     *bağlantı encap:Ethernet  HWaddr c0:14:3d:d2:af:23 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)






iwconfig


wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=19 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
         
lo        no wireless extensions.






iwlist scanning


wlan0     No scan results


lo        Interface doesn't support scanning.




lsmod


Module                  Size  Used by
dm_crypt               22402  0
arc4                   12473  2
brcmsmac              503651  0
snd_hda_codec_hdmi     31423  1
snd_hda_codec_conexant    52202  1
mac80211              461161  1 brcmsmac
coretemp               13168  0
snd_hda_intel          32515  3
snd_hda_codec         111547  3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
brcmutil               14355  1 brcmsmac
kvm                   357806  0
cfg80211              175375  2 brcmsmac,mac80211
snd_hwdep              13272  1 snd_hda_codec
snd_pcm                80163  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0
snd_rawmidi            25382  1 snd_seq_midi
uvcvideo               71277  0
snd_seq_midi_event     14475  1 snd_seq_midi
videobuf2_core         32070  1 uvcvideo
snd_seq                51255  2 snd_seq_midi,snd_seq_midi_event
videodev               95841  2 uvcvideo,videobuf2_core
videobuf2_vmalloc      12756  1 uvcvideo
videobuf2_memops       13184  1 videobuf2_vmalloc
btusb                  17950  0
snd_timer              24411  2 snd_pcm,snd_seq
snd_seq_device         14137  3 snd_seq_midi,snd_rawmidi,snd_seq
parport_pc             31968  0
cordic                 12487  1 brcmsmac
joydev                 17161  0
snd                    61991  16 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ppdev                  12817  0
dm_multipath           22365  0
bnep                   17707  2
rfcomm                 37276  12
bcma                   34483  1 brcmsmac
lp                     13299  0
ideapad_laptop         13670  0
mac_hid                13037  0
bluetooth             183228  22 btusb,bnep,rfcomm
lpc_ich                16925  0
soundcore              14599  1 snd
sparse_keymap          13658  1 ideapad_laptop
mei                    35796  0
psmouse                84843  0
snd_page_alloc         14036  2 snd_hda_intel,snd_pcm
scsi_dh                14178  1 dm_multipath
serio_raw              13031  0
microcode              18209  0
parport                40753  3 parport_pc,ppdev,lp
squashfs               35834  1
overlayfs              27233  1
nls_utf8               12493  1
isofs                  39210  1
nls_iso8859_1          12617  1
dm_raid45              75357  0
xor                    26090  1 dm_raid45
dm_mirror              21665  0
dm_region_hash         15977  1 dm_mirror
dm_log                 18137  3 dm_raid45,dm_mirror,dm_region_hash
hid_generic            12445  0
usbhid                 41702  0
hid                    82142  2 hid_generic,usbhid
i915                  457161  3
drm_kms_helper         45271  1 i915
drm                   230463  4 i915,drm_kms_helper
i2c_algo_bit           13197  1 i915
video                  18847  1 i915
usb_storage            39350  1




dmesg




[    3.203247] pnp 00:08: >[io  0x0064]
[    3.203252] pnp 00:08: >[irq 1]
[    3.203278] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
[    3.203358] pnp 00:09: >[irq 12]
[    3.203386] pnp 00:09: >Plug and Play ACPI device, IDs ETD0612 ETD0001 PNP0f13 (active)
[    3.261812] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
[    3.261815] pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
[    3.261817] pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
[    3.261819] pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
[    3.261821] pnp 00:0a: >[mem 0xf0000000-0xf3ffffff]
[    3.261824] pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
[    3.261826] pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
[    3.261828] pnp 00:0a: >[mem 0xff000000-0xff000fff]
[    3.261830] pnp 00:0a: >[mem 0xff010000-0xffffffff]
[    3.261832] pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
[    3.261835] pnp 00:0a: >[mem 0x7ea00000-0x7ea00fff]
[    3.261891] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[    3.261894] system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
[    3.261897] system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
[    3.261900] system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
[    3.261902] system 00:0a: >[mem 0xf0000000-0xf3ffffff] has been reserved
[    3.261905] system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
[    3.261908] system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
[    3.261911] system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
[    3.261914] system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
[    3.261916] system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
[    3.261919] system 00:0a: >[mem 0x7ea00000-0x7ea00fff] has been reserved
[    3.261923] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.262314] pnp 00:0b: >[mem 0x20000000-0x201fffff]
[    3.262317] pnp 00:0b: >[mem 0x40000000-0x401fffff]
[    3.262379] system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
[    3.262382] system 00:0b: >[mem 0x40000000-0x401fffff] has been reserved
[    3.262385] system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
[    3.262408] pnp: PnP ACPI: found 12 devices
[    3.262409] ACPI: ACPI bus type pnp unregistered
[    3.262412] PnPBIOS: Disabled by ACPI PNP
[    3.298413] pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
[    3.298419] pci 0000:00:1c.0: >  bridge window [io  0x2000-0x2fff]
[    3.298427] pci 0000:00:1c.0: >  bridge window [mem 0x90500000-0x905fffff]
[    3.298441] pci 0000:00:1c.1: >PCI bridge to [bus 02-02]
[    3.298449] pci 0000:00:1c.1: >  bridge window [mem 0x90400000-0x904fffff]
[    3.298492] pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
[    3.298495] pci_bus 0000:00: >resource 5 [io  0x0d00-0xffff]
[    3.298498] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[    3.298500] pci_bus 0000:00: >resource 7 [mem 0x7ea00000-0xfeafffff]
[    3.298503] pci_bus 0000:01: >resource 0 [io  0x2000-0x2fff]
[    3.298505] pci_bus 0000:01: >resource 1 [mem 0x90500000-0x905fffff]
[    3.298508] pci_bus 0000:02: >resource 1 [mem 0x90400000-0x904fffff]
[    3.298540] NET: Registered protocol family 2
[    3.298598] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    3.298707] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    3.298972] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    3.299100] TCP: Hash tables configured (established 131072 bind 65536)
[    3.299102] TCP: reno registered
[    3.299105] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    3.299111] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    3.299180] NET: Registered protocol family 1
[    3.299194] pci 0000:00:02.0: >Boot video device
[    3.329729] PCI: CLS 64 bytes, default 64
[    3.329817] Simple Boot Flag at 0x44 set to 0x1
[    3.330187] audit: initializing netlink socket (disabled)
[    3.330196] type=2000 audit(1361918451.208:1): initialized
[    3.355194] highmem bounce pool size: 64 pages
[    3.355206] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.357074] VFS: Disk quotas dquot_6.5.2
[    3.357125] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.357683] fuse init (API version 7.19)
[    3.357762] msgmni has been set to 1643
[    3.358029] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    3.358053] io scheduler noop registered
[    3.358055] io scheduler deadline registered (default)
[    3.358062] io scheduler cfq registered
[    3.358310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.358330] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.358385] intel_idle: MWAIT substates: 0x120
[    3.358387] intel_idle: v0.4 model 0x2A
[    3.358388] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.358486] ACPI: AC Adapter [ACAD] (on-line)
[    3.358550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[    3.358555] ACPI: Power Button [PWRB]
[    3.358595] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input1
[    3.358598] ACPI: Sleep Button [SLPB]
[    3.358647] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    3.358669] ACPI: Lid Switch [LID0]
[    3.358709] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.358712] ACPI: Power Button [PWRF]
[    3.358795] ACPI: Requesting acpi_cpufreq
[    4.357344] Refined TSC clocksource calibration: 1795.920 MHz.
[    4.357350] Switching to clocksource tsc
[    4.661086] Freeing initrd memory: 16484k freed
[    4.784728] thermal LNXTHERM:00: >registered as thermal_zone0
[    4.784732] ACPI: Thermal Zone [TZ00] (55 C)
[    4.784754] ACPI: Battery Slot [BAT1] (battery present)
[    4.784783] GHES: HEST is not enabled!
[    4.784851] isapnp: Scanning for PnP cards...
[    4.789216] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.790379] Linux agpgart interface v0.103
[    4.791791] brd: module loaded
[    4.792500] loop: module loaded
[    4.792608] ahci 0000:00:1f.2: >version 3.0
[    4.792684] ahci 0000:00:1f.2: >irq 40 for MSI/MSI-X
[    4.792723] ahci: SSS flag set, parallel bus scan disabled
[    4.805203] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    4.805207] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst
[    4.805213] ahci 0000:00:1f.2: >setting latency timer to 64
[    4.813672] scsi0 : ahci
[    4.813740] scsi1 : ahci
[    4.813794] scsi2 : ahci
[    4.813846] scsi3 : ahci
[    4.813898] scsi4 : ahci
[    4.813950] scsi5 : ahci
[    4.814052] ata1: SATA max UDMA/133 abar m2048@0x90617000 port 0x90617100 irq 40
[    4.814054] ata2: DUMMY
[    4.814057] ata3: SATA max UDMA/133 abar m2048@0x90617000 port 0x90617200 irq 40
[    4.814058] ata4: DUMMY
[    4.814060] ata5: DUMMY
[    4.814061] ata6: DUMMY
[    4.814373] Fixed MDIO Bus: probed
[    4.814422] tun: Universal TUN/TAP device driver, 1.6
[    4.814423] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.814475] PPP generic driver version 2.4.2
[    4.814514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.814553] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
[    4.814558] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
[    4.814564] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
[    4.814591] ehci_hcd 0000:00:1a.0: >debug port 2
[    4.818485] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
[    4.818502] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0x90619000
[    4.829180] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
[    4.829201] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    4.829204] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.829206] usb usb1: >Product: EHCI Host Controller
[    4.829209] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    4.829211] usb usb1: >SerialNumber: 0000:00:1a.0
[    4.829325] hub 1-0:1.0: >USB hub found
[    4.829330] hub 1-0:1.0: >2 ports detected
[    4.829402] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
[    4.829406] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
[    4.829411] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
[    4.829436] ehci_hcd 0000:00:1d.0: >debug port 2
[    4.833313] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
[    4.833329] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0x90618000
[    4.845175] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
[    4.845190] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[    4.845193] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.845195] usb usb2: >Product: EHCI Host Controller
[    4.845197] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    4.845199] usb usb2: >SerialNumber: 0000:00:1d.0
[    4.845301] hub 2-0:1.0: >USB hub found
[    4.845305] hub 2-0:1.0: >2 ports detected
[    4.845362] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.845378] uhci_hcd: USB Universal Host Controller Interface driver
[    4.845428] xhci_hcd 0000:00:14.0: >setting latency timer to 64
[    4.845432] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[    4.845436] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
[    4.845531] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
[    4.845547] xhci_hcd 0000:00:14.0: >irq 21, io mem 0x90600000
[    4.845622] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
[    4.845676] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
[    4.845678] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.845680] usb usb3: >Product: xHCI Host Controller
[    4.845682] usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[    4.845685] usb usb3: >SerialNumber: 0000:00:14.0
[    4.845770] xHCI xhci_add_endpoint called for root hub
[    4.845772] xHCI xhci_check_bandwidth called for root hub
[    4.845795] hub 3-0:1.0: >USB hub found
[    4.845803] hub 3-0:1.0: >4 ports detected
[    4.845861] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[    4.845865] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
[    4.845887] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
[    4.845890] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.845892] usb usb4: >Product: xHCI Host Controller
[    4.845894] usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[    4.845896] usb usb4: >SerialNumber: 0000:00:14.0
[    4.845969] xHCI xhci_add_endpoint called for root hub
[    4.845970] xHCI xhci_check_bandwidth called for root hub
[    4.845992] hub 4-0:1.0: >USB hub found
[    4.846000] hub 4-0:1.0: >4 ports detected
[    4.921193] usbcore: registered new interface driver libusual
[    4.921242] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS5] at 0x60,0x64 irq 1,12
[    4.934803] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.934808] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.934876] mousedev: PS/2 mouse device common for all mice
[    4.935010] rtc_cmos 00:06: >RTC can wake from S4
[    4.936728] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[    4.936757] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    4.936809] device-mapper: uevent: version 1.0.3
[    4.936869] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    4.936898] EISA: Probing bus 0 at eisa.0
[    4.936900] EISA: Cannot allocate resource for mainboard
[    4.936901] Cannot allocate resource for EISA slot 1
[    4.936903] Cannot allocate resource for EISA slot 2
[    4.936904] Cannot allocate resource for EISA slot 3
[    4.936906] Cannot allocate resource for EISA slot 4
[    4.936907] Cannot allocate resource for EISA slot 5
[    4.936909] Cannot allocate resource for EISA slot 6
[    4.936910] Cannot allocate resource for EISA slot 7
[    4.936912] Cannot allocate resource for EISA slot 8
[    4.936913] EISA: Detected 0 cards.
[    4.936950] cpuidle: using governor ladder
[    4.936994] cpuidle: using governor menu
[    4.936996] EFI Variables Facility v0.08 2004-May-17
[    4.937156] ashmem: initialized
[    4.937278] TCP: cubic registered
[    4.937385] NET: Registered protocol family 10
[    4.937581] NET: Registered protocol family 17
[    4.937593] Key type dns_resolver registered
[    4.937682] Using IPI No-Shortcut mode
[    4.937751] PM: Hibernation image not present or could not be loaded.
[    4.937762] registered taskstats version 1
[    4.940028] Key type trusted registered
[    4.941950] Key type encrypted registered
[    4.944394]   Magic number: 1:397:705
[    4.944469] rtc_cmos 00:06: >setting system clock to 2013-02-26 22:40:53 UTC (1361918453)
[    4.944932] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.944934] EDD information not available.
[    4.950601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    4.993185] ACPI: Battery Slot [BAT1] (battery present)
[    5.137095] ata1: SATA *bağlantı up 3.0 Gbps (SStatus 123 SControl 300)
[    5.141360] isapnp: No Plug & Play device found
[    5.145104] usb 1-1: >new high-speed USB device number 2 using ehci_hcd
[    5.277433] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
[    5.277440] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.277859] hub 1-1:1.0: >USB hub found
[    5.278036] hub 1-1:1.0: >6 ports detected
[    5.389023] usb 2-1: >new high-speed USB device number 2 using ehci_hcd
[    5.403438] ata1.00: ATA-8: ST320LT012-9WS14C, 0001LVM1, max UDMA/133
[    5.403445] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.433663] ata1.00: configured for UDMA/133
[    5.433911] scsi 0:0:0:0: >Direct-Access     ATA      ST320LT012-9WS14 0001 PQ: 0 ANSI: 5
[    5.434037] sd 0:0:0:0: >[sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    5.434040] sd 0:0:0:0: >[sda] 4096-byte physical blocks
[    5.434046] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[    5.434086] sd 0:0:0:0: >[sda] Write Protect is off
[    5.434089] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    5.434118] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.460697]  sda: sda1 sda2 sda3
[    5.461075] sd 0:0:0:0: >[sda] Attached SCSI disk
[    5.521360] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
[    5.521367] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.521774] hub 2-1:1.0: >USB hub found
[    5.521963] hub 2-1:1.0: >6 ports detected
[    5.688931] usb 3-2: >new high-speed USB device number 2 using xhci_hcd
[    5.752915] ata3: SATA *bağlantı up 1.5 Gbps (SStatus 113 SControl 300)
[    5.753476] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[    5.754428] ata3.00: configured for UDMA/100
[    5.757474] scsi 2:0:0:0: >CD-ROM            PLDS     DVD-RW DS8A8SH   KL31 PQ: 0 ANSI: 5
[    5.761574] sr0: scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.761579] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.761756] sr 2:0:0:0: >Attached scsi CD-ROM sr0
[    5.761833] sr 2:0:0:0: >Attached scsi generic sg1 type 5
[    5.762082] Freeing unused kernel memory: 756k freed
[    5.762277] Write protecting the kernel text: 5960k
[    5.762316] Write protecting the kernel read-only data: 2424k
[    5.762317] NX-protecting the kernel data: 4280k
[    5.781254] udevd[106]: starting version 175
[    5.798794] usb 3-2: >New USB device found, idVendor=090c, idProduct=1000
[    5.798799] usb 3-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.798802] usb 3-2: >SerialNumber: 12021615000070
[    5.799061] usb 3-2: >ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[    5.799068] usb 3-2: >ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[    5.806147] Initializing USB Mass Storage driver...
[    5.812887] scsi6 : usb-storage 3-2:1.0
[    5.812986] usbcore: registered new interface driver usb-storage
[    5.812988] USB Mass Storage support registered.
[    5.844662] [drm] Initialized drm 1.1.0 20060810
[    5.872955] usb 1-1.2: >new low-speed USB device number 3 using ehci_hcd
[    5.873384] i915 0000:00:02.0: >setting latency timer to 64
[    5.873744] pci 0000:00:00.0: >Intel Sandybridge Chipset
[    5.873791] pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
[    5.874379] pci 0000:00:00.0: >detected 65536K stolen memory
[    5.875290] i915 0000:00:02.0: >irq 42 for MSI/MSI-X
[    5.875303] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.875304] [drm] Driver supports precise vblank timestamp query.
[    5.875809] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.968431] usb 1-1.2: >New USB device found, idVendor=04f3, idProduct=0234
[    5.968441] usb 1-1.2: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    5.968447] usb 1-1.2: >Product: OM
[    5.973925] usbcore: registered new interface driver usbhid
[    5.973928] usbhid: USB HID core driver
[    5.976115] input: OM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[    5.976247] hid-generic 0003:04F3:0234.0001: >input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:1a.0-1.2/input0
[    6.040919] usb 1-1.3: >new full-speed USB device number 4 using ehci_hcd
[    6.136252] usb 1-1.3: >New USB device found, idVendor=0489, idProduct=e032
[    6.136260] usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.136265] usb 1-1.3: >Product: BCM20702A0
[    6.136270] usb 1-1.3: >Manufacturer: Broadcom Corp
[    6.136275] usb 1-1.3: >SerialNumber: C0143DD2AF24
[    6.208866] usb 2-1.6: >new high-speed USB device number 3 using ehci_hcd
[    6.315865] usb 2-1.6: >New USB device found, idVendor=04f2, idProduct=b2e2
[    6.315873] usb 2-1.6: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.315879] usb 2-1.6: >Product: Lenovo EasyCamera
[    6.315884] usb 2-1.6: >Manufacturer: Chicony Corp.
[    6.423958] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    6.545487] fbcon: inteldrmfb (fb0) is primary device
[    6.772893] Console: switching to colour frame buffer device 170x48
[    6.777138] fb0: inteldrmfb frame buffer device
[    6.777140] drm: registered panic notifier
[    6.780313] acpi device:3d: >registered as cooling_device2
[    6.780628] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.780684] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    6.780737] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.996664] xor: automatically using best checksumming function:
[    7.003600] scsi 6:0:0:0: >Direct-Access                                    PQ: 0 ANSI: 0 CCS
[    7.009220] sd 6:0:0:0: >Attached scsi generic sg2 type 0
[    7.009657] sd 6:0:0:0: >[sdb] 15155200 512-byte logical blocks: (7.75 GB/7.22 GiB)
[    7.010215] sd 6:0:0:0: >[sdb] Write Protect is off
[    7.010219] sd 6:0:0:0: >[sdb] Mode Sense: 43 00 00 00
[    7.010773] sd 6:0:0:0: >[sdb] No Caching mode page present
[    7.010776] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
[    7.012728] sd 6:0:0:0: >[sdb] No Caching mode page present
[    7.012731] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
[    7.013535]  sdb: sdb1
[    7.015197] sd 6:0:0:0: >[sdb] No Caching mode page present
[    7.015200] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
[    7.015202] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
[    7.036476]    pIII_sse  :  7959.000 MB/sec
[    7.037043] device-mapper: dm-raid45: initialized v0.2594b
[   10.076221] ISO 9660 Extensions: Microsoft Joliet Level 3
[   10.139293] ISO 9660 Extensions: RRIP_1991A
[   10.549775] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   49.005393] udevd[1279]: starting version 175
[   52.605357] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   53.282571] mei 0000:00:16.0: >setting latency timer to 64
[   53.282649] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
[   53.287891] mei 0000:00:16.0: >wd: failed to find the client
[   53.398998] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   53.404787] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   53.407864] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   53.407872] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   53.407874] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   53.407878] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   53.407882] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   53.407886] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   53.407890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   53.407891] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   53.459965] Bluetooth: Core ver 2.16
[   53.459984] NET: Registered protocol family 31
[   53.459986] Bluetooth: HCI device and connection manager initialized
[   53.459988] Bluetooth: HCI socket layer initialized
[   53.459989] Bluetooth: L2CAP socket layer initialized
[   53.459993] Bluetooth: SCO socket layer initialized
[   53.864424] input: Ideapad extra buttons as /devices/platform/ideapad/input/input7
[   53.955587] bcma: Found chip with id 0x4313, rev 0x01 and package 0x08
[   53.955620] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[   53.955647] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[   53.955708] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[   53.960564] lp: driver loaded but no devices found
[   53.987871] bcma: Bus registered
[   54.029431] psmouse serio1: >elantech: assuming hardware version 3 (with firmware version 0x450f02)
[   54.053560] psmouse serio1: >elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[   54.117162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   54.117165] Bluetooth: BNEP filters: protocol multicast
[   54.122846] Bluetooth: RFCOMM TTY layer initialized
[   54.122851] Bluetooth: RFCOMM socket layer initialized
[   54.122853] Bluetooth: RFCOMM ver 1.11
[   54.129842] device-mapper: multipath: version 1.4.0 loaded
[   54.178573] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[   54.364244] init: failsafe main process (1469) killed by TERM signal
[   54.590119] ppdev: user-space parallel port driver
[   56.049403] usbcore: registered new interface driver btusb
[   56.280041] Linux video capture interface: v2.00
[   56.899508] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
[   56.902387] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input9
[   56.906908] usbcore: registered new interface driver uvcvideo
[   56.906912] USB Video Class driver (1.1.1)
[   58.050390] cfg80211: Calling CRDA to update world regulatory domain
[   60.390427] snd_hda_intel 0000:00:1b.0: >irq 44 for MSI/MSI-X
[   60.393361] kvm: disabled by bios
[   60.489777] cfg80211: World regulatory domain updated:
[   60.489781] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   60.489783] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   60.489785] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   60.489787] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   60.489789] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   60.489791] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   61.502168] hda_codec: CX20590: BIOS auto-probing.
[   62.087155] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   62.087376] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   62.087574] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   63.878722] brcmsmac bcma0:0: >mfg 4bf core 812 rev 24 class 0 irq 17
[   65.174141] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   65.174146] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174148] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   65.174150] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174152] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   65.174154] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174155] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   65.174157] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174159] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   65.174161] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174162] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   65.174164] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174166] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   65.174167] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174169] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   65.174171] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174172] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   65.174174] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174175] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   65.174177] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174179] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   65.174180] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   65.174182] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   65.174184] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
[   65.174185] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   65.174187] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
[   65.174189] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   65.174230] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   65.387985] ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht'
[   68.004178] ieee80211 phy0: >brcms_ops_bss_info_changed: qos enabled: false (implement)
[   68.004190] ieee80211 phy0: >brcms_ops_config: change power-save mode: false (implement)
[   68.004903] IPv6: ADDRCONF(NETDEV_UP): wlan0: *bağlantı is not ready
[   68.005369] IPv6: ADDRCONF(NETDEV_UP): wlan0: *bağlantı is not ready








dmesg | tail








[   65.174184] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
[   65.174185] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   65.174187] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
[   65.174189] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   65.174230] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   65.387985] ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht'
[   68.004178] ieee80211 phy0: >brcms_ops_bss_info_changed: qos enabled: false (implement)
[   68.004190] ieee80211 phy0: >brcms_ops_config: change power-save mode: false (implement)
[   68.004903] IPv6: ADDRCONF(NETDEV_UP): wlan0: *bağlantı is not ready
[   68.005369] IPv6: ADDRCONF(NETDEV_UP): wlan0: *bağlantı is not ready






istediğiniz kodları girdim şimdiden teşekkür ediyorum

[heartsmagic]

Broadcom 4313 bilindik bir kart. Bazı makinelerde farklı nedenlerden dolayı sorun olabiliyor. Kablo ile bağlanma şansın varsa ve kurulumdan sonra sorun olursa foruma uğrayabilirsin rahatlıkla. Öncelikle kurulumu yap bir dene.

Bir de, komut çıktılarını foruma aktarırken şunu göz önünde bulundurursan seviniriz: kodetiketi

[aksarayli]

Tamam hocam teşekkür ederim Hata için özür dilerim. Kurulumu yaparken internet bağlantısı yok kurulum tamamlanınca internete bağlanabilir miyim ?

[heartsmagic]

Dediğim gibi ne olacağını kestiremiyorum, sen dene, baktın giremiyorsun kablo ile gelmeyi denersin. Ubuntu tek sistem mi olacak makinede?

[aksarayli]

Tek sistem olarak kuracaktım ama en iyisi Windows'u kaldırmayım zaten şu an interneti kablolu bağlantıyla kullanıyorum. Bağlantı kablolu olunca Ubuntu'da internet açılmıyor.

[if]

@aksarayli, konunun başından beri bizlere çalışıp çalışmadığını sorup duruyorsunuz. Bakın çalıştıranlar var:

http://forum.ubuntu-tr.net/index.php?topic=37305.0
http://askubuntu.com/questions/237004/atheros-ar8161-ethernet-card-not-working-on-12-10-on-an-asus-n56vm

[aksarayli]

Kurulum yaptım ve hala kablolu bağlanamıyorum. http://askubuntu.com/questions/237004/atheros-ar8161-ethernet-card-not-working-on-12-10-on-an-asus-n56vm burada anlatılanları nasıl uygulayabilirim ?

[if]

Kod Seç Genişlet

wget http://www.orbit-lab.org/kernel/compat-wireless-3-stable/v3.6/compat-wireless-3.6.8-1-snpc.tar.bz2 ile paketi çekin, sonrası aynı komut.

[aksarayli]

hocam benim modemim kablolu bunun için de kablosuz bağlantı yapamıyorum ben bu paketi indirip bir flash disk ile Ubuntu'ya nasıl yükleyebilirim ?

[if]

compat-wireless-3.6.8-1-snpc.tar.bz2 paketini Ubuntu'ya atmanız yeterli, geri kalanı komutları vermek.

[aksarayli]

O komutları şimdi bana anlatabilirseniz yapacağım. İnternet bağlantısı yokken size ulaşamayacağım için bana şimdi anlatın ben yükleme yapayım