Ethernet kartını görmüyor...

[mvasfi]

Bilgisayarım da ubuntu ve windows var ben sürekli ubuntu kullanıyorum ubuntu ya geçen gün son bir update vardı birde denemek için bir oyun yükledim o günün sabahında ethernet kartını görmüyordu  wireless da çalışmıyor du ama windowsda çalışıyor.  broadcom 440 ethernet kartı var yardımcı olursanız sevinirim...

[burk]

http://forum.ubuntu-tr.net/index.php?topic=28764.0

[mvasfi]

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS"

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ uname -a
Linux Vasfi-Pc 3.2.0-36-generic #57-Ubuntu SMP Tue Jan 8 21:41:24 UTC 2013 i686 i686 i386 GNU/Linux

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:0737 Microsoft Corp. Compact Optical Mouse 50

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ rfkill list
0: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: yes
1: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: yes

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ sudo lshw -C network
[sudo] password for vsf:
  *-network               
       açıklama: Network controller
       ürün: BCM4311 802.11b/g WLAN
       üretici: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:10:00.0
       sürüm: 01
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list
       yapılandırma: driver=wl latency=0
       kaynaklar: irq:17 bellek:f4000000-f4003fff
  *-network UNCLAIMED
       açıklama: Ethernet controller
       ürün: BCM4401-B0 100Base-TX
       üretici: Broadcom Corporation
       physical id: e
       bus info: pci@0000:02:0e.0
       sürüm: 02
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm bus_master cap_list
       yapılandırma: latency=64
       kaynaklar: bellek:f4108000-f4109fff

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ ifconfig
lo        *bağlantı encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:96 errors:0 dropped:0 overruns:0 frame:0
          TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6016 (6.0 KB)  TX bytes:6016 (6.0 KB)

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ iwconfig
lo        no wireless extensions.

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ iwlist scanning
lo        Interface doesn't support scanning.

Kod Seç Genişlet

vsf@Vasfi-Pc:~$ lsmod
Module                  Size  Used by
rfcomm                 38139  0
parport_pc             32114  0
bnep                   17830  2
ppdev                  12849  0
bluetooth             158479  10 rfcomm,bnep
binfmt_misc            17292  1
snd_hda_codec_si3054    12864  1
snd_hda_codec_analog    75395  1
snd_hda_intel          32765  2
snd_hda_codec         109562  3 snd_hda_codec_si3054,snd_hda_codec_analog,snd_hda_intel
i915                  419326  3
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80916  3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0
ssb                    69106  1
wl                   3032542  1
snd_rawmidi            25424  1 snd_seq_midi
joydev                 17393  0
drm_kms_helper         45466  1 i915
snd_seq_midi_event     14475  1 snd_seq_midi
pcmcia                 39826  0
drm                   197641  4 i915,drm_kms_helper
cfg80211              178877  1 wl
snd_seq                51592  2 snd_seq_midi,snd_seq_midi_event
snd_timer              28931  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
psmouse                96718  0
snd                    62218  14 snd_hda_codec_si3054,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
yenta_socket           27428  0
mac_hid                13077  0
pcmcia_rsrc            18367  1 yenta_socket
i2c_algo_bit           13199  1 i915
hp_wmi                 13652  0
pcmcia_core            21511  3 pcmcia,yenta_socket,pcmcia_rsrc
serio_raw              13027  0
lib80211               14040  1 wl
soundcore              14635  1 snd
snd_page_alloc         14115  2 snd_hda_intel,snd_pcm
sparse_keymap          13658  1 hp_wmi
wmi                    18744  1 hp_wmi
video                  19068  1 i915
lp                     17455  0
parport                40930  3 parport_pc,ppdev,lp
usbhid                 41937  0
hid                    77428  1 usbhid
firewire_ohci          40180  0
firewire_core          56940  1 firewire_ohci
crc_itu_t              12627  1 firewire_core




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 04 Şubat 2013 - 09:28:26
dmseg e e verilen cvp bu ama daha devam ediyor galiba...

Kod Seç Genişlet

[    0.401204] pci_bus 0000:20: resource 1 [mem 0xf0000000-0xf3ffffff]
[    0.401208] pci_bus 0000:20: resource 2 [mem 0xdc000000-0xdc1fffff 64bit pref]
[    0.401211] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.401215] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf43fffff]
[    0.401218] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xdbffffff pref]
[    0.401222] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.401225] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.401229] pci_bus 0000:03: resource 0 [io  0x5400-0x54ff]
[    0.401232] pci_bus 0000:03: resource 1 [io  0x5000-0x50ff]
[    0.401236] pci_bus 0000:03: resource 2 [mem 0xd8000000-0xdbffffff pref]
[    0.401297] NET: Registered protocol family 2
[    0.401396] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.401727] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.402276] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.402574] TCP: Hash tables configured (established 131072 bind 65536)
[    0.402577] TCP reno registered
[    0.402582] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.402593] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.402702] NET: Registered protocol family 1
[    0.402728] pci 0000:00:02.0: Boot video device
[    0.402773] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.402797] pci 0000:00:1d.0: PCI INT A disabled
[    0.402808] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.402830] pci 0000:00:1d.1: PCI INT B disabled
[    0.402840] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.402862] pci 0000:00:1d.2: PCI INT C disabled
[    0.402873] pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.402895] pci 0000:00:1d.3: PCI INT D disabled
[    0.402908] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.402945] pci 0000:00:1d.7: PCI INT A disabled
[    0.402982] PCI: CLS 64 bytes, default 64
[    0.403519] audit: initializing netlink socket (disabled)
[    0.403533] type=2000 audit(1359961901.396:1): initialized
[    0.432093] highmem bounce pool size: 64 pages
[    0.432101] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.435045] VFS: Disk quotas dquot_6.5.2
[    0.435130] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.435922] fuse init (API version 7.17)
[    0.436083] msgmni has been set to 1645
[    0.436518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.436559] io scheduler noop registered
[    0.436562] io scheduler deadline registered
[    0.436572] io scheduler cfq registered (default)
[    0.436759] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.436831] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.436929] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.436991] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.437088] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.437154] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.437286] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.437322] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.437431] intel_idle: MWAIT substates: 0x22220
[    0.437433] intel_idle: does not run on family 6 model 15
[    0.441080] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.441231] ACPI: AC Adapter [C1B7] (on-line)
[    0.441342] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    0.441349] ACPI: Sleep Button [C23E]
[    0.441416] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.441459] ACPI: Lid Switch [C237]
[    0.441525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.441530] ACPI: Power Button [PWRF]
[    0.441667] ACPI: Fan [C318] (off)
[    0.441751] ACPI: Fan [C319] (off)
[    0.441838] ACPI: Fan [C31A] (off)
[    0.441920] ACPI: Fan [C31B] (off)
[    0.442485] Marking TSC unstable due to TSC halts in idle
[    0.442493] ACPI: acpi_idle registered with cpuidle
[    0.470001] thermal LNXTHERM:00: registered as thermal_zone0
[    0.470005] ACPI: Thermal Zone [TZ0] (50 C)
[    0.484612] thermal LNXTHERM:01: registered as thermal_zone1
[    0.484617] ACPI: Thermal Zone [TZ1] (49 C)
[    0.498921] thermal LNXTHERM:02: registered as thermal_zone2
[    0.498925] ACPI: Thermal Zone [TZ2] (33 C)
[    0.508422] thermal LNXTHERM:03: registered as thermal_zone3
[    0.508426] ACPI: Thermal Zone [TZ3] (17 C)
[    0.512146] thermal LNXTHERM:04: registered as thermal_zone4
[    0.512150] ACPI: Thermal Zone [TZ4] (35 C)
[    0.512211] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.512224] ACPI: Battery Slot [C1B9] (battery present)
[    0.512233] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.512241] ACPI: Battery Slot [C1B8] (battery absent)
[    0.512291] ERST: Table is not found!
[    0.512293] GHES: HEST is not enabled!
[    0.512420] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.512864] isapnp: Scanning for PnP cards...
[    0.566318] Freeing initrd memory: 13816k freed
[    0.574515] ACPI: Battery Slot [C1B8] (battery absent)
[    0.615794] ACPI: Battery Slot [C1B9] (battery present)
[    0.867040] isapnp: No Plug & Play device found
[    0.916607] Linux agpgart interface v0.103
[    0.916735] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.916825] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.917535] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.917707] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.920059] brd: module loaded
[    0.921263] loop: module loaded
[    0.921434] ahci 0000:00:1f.2: version 3.0
[    0.921450] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.921515] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    0.921567] ahci: SSS flag set, parallel bus scan disabled
[    0.921600] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    0.921605] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[    0.921613] ahci 0000:00:1f.2: setting latency timer to 64
[    0.922234] scsi0 : ahci
[    0.922379] scsi1 : ahci
[    0.922505] scsi2 : ahci
[    0.922629] scsi3 : ahci
[    0.922768] ata1: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585100 irq 43
[    0.922772] ata2: DUMMY
[    0.922774] ata3: DUMMY
[    0.922776] ata4: DUMMY
[    0.922873] ata_piix 0000:00:1f.1: version 2.13
[    0.922886] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.922925] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.923381] scsi4 : ata_piix
[    0.923495] scsi5 : ata_piix
[    0.923944] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
[    0.923948] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
[    0.924072] ata6: port disabled--ignoring
[    0.924533] Fixed MDIO Bus: probed
[    0.924563] tun: Universal TUN/TAP device driver, 1.6
[    0.924565] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.924743] PPP generic driver version 2.4.2
[    0.924907] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.924930] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.924948] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.924953] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.925019] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.925044] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.925059] ehci_hcd 0000:00:1d.7: debug port 1
[    0.928958] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.928982] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
[    0.944023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.944241] hub 1-0:1.0: USB hub found
[    0.944247] hub 1-0:1.0: 8 ports detected
[    0.944366] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.944387] uhci_hcd: USB Universal Host Controller Interface driver
[    0.944410] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.944420] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.944425] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.944496] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.944529] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[    0.944719] hub 2-0:1.0: USB hub found
[    0.944725] hub 2-0:1.0: 2 ports detected
[    0.944819] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.944829] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.944834] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.944904] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.944947] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[    0.945132] hub 3-0:1.0: USB hub found
[    0.945138] hub 3-0:1.0: 2 ports detected
[    0.945235] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.945245] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.945250] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.945318] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.945361] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[    0.945548] hub 4-0:1.0: USB hub found
[    0.945554] hub 4-0:1.0: 2 ports detected
[    0.945652] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.945663] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.945668] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.945736] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.945779] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
[    0.945965] hub 5-0:1.0: USB hub found
[    0.945971] hub 5-0:1.0: 2 ports detected
[    0.946140] usbcore: registered new interface driver libusual
[    0.946216] i8042: PNP: PS/2 Controller [PNP0303:C215,PNP0f13:C216] at 0x60,0x64 irq 1,12
[    0.947836] i8042: Detected active multiplexing controller, rev 1.1
[    0.948563] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.948572] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.948615] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.948652] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.948691] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.948875] mousedev: PS/2 mouse device common for all mice
[    0.949167] rtc_cmos 00:05: RTC can wake from S4
[    0.949321] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.949357] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.949455] device-mapper: uevent: version 1.0.3
[    0.949563] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.949614] EISA: Probing bus 0 at eisa.0
[    0.949622] Cannot allocate resource for EISA slot 1
[    0.949625] Cannot allocate resource for EISA slot 2
[    0.949627] Cannot allocate resource for EISA slot 3
[    0.949630] Cannot allocate resource for EISA slot 4
[    0.949633] Cannot allocate resource for EISA slot 5
[    0.949636] Cannot allocate resource for EISA slot 6
[    0.949638] Cannot allocate resource for EISA slot 7
[    0.949646] EISA: Detected 0 cards.
[    0.949657] cpufreq-nforce2: No nForce2 chipset.
[    0.949729] cpuidle: using governor ladder
[    0.949843] cpuidle: using governor menu
[    0.949847] EFI Variables Facility v0.08 2004-May-17
[    0.950221] TCP cubic registered
[    0.950393] NET: Registered protocol family 10
[    0.951253] NET: Registered protocol family 17
[    0.951259] Registering the dns_resolver key type
[    0.951288] Using IPI No-Shortcut mode
[    0.951496] PM: Hibernation image not present or could not be loaded.
[    0.951512] registered taskstats version 1
[    0.961553]   Magic number: 1:630:166
[    0.961695] rtc_cmos 00:05: setting system clock to 2013-02-04 07:11:42 UTC (1359961902)
[    0.967070] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.967074] EDD information not available.
[    0.970517] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.104803] ata5.00: ATAPI: PIONEER DVDRW   DVR-K17, 1.05, max MWDMA2
[    1.136790] ata5.00: configured for MWDMA2
[    1.412079] ata1: SATA *bağlantı up 1.5 Gbps (SStatus 113 SControl 300)
[    1.413670] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.414346] ata1.00: ATA-8: ST9320320AS, 0303, max UDMA/133
[    1.414353] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.416281] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.416958] ata1.00: configured for UDMA/133
[    1.417245] scsi 0:0:0:0: Direct-Access     ATA      ST9320320AS      0303 PQ: 0 ANSI: 5
[    1.417470] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.417513] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.417555] sd 0:0:0:0: [sda] Write Protect is off
[    1.417561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.417597] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.427085] scsi 4:0:0:0: CD-ROM            PIONEER  DVDRW   DVR-K17  1.05 PQ: 0 ANSI: 5
[    1.439000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.439007] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.439247] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.439412] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.439627]  sda: sda1 sda2 < sda5 > sda3 sda4
[    1.440049] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    1.440602] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.440650] Freeing unused kernel memory: 716k freed
[    1.441023] Write protecting the kernel text: 5628k
[    1.441112] Write protecting the kernel read-only data: 2328k
[    1.469171] udevd[96]: starting version 175
[    1.643205] firewire_ohci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.696569] firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    1.699300] input: Microsoft  Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input4
[    1.699503] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Compact Optical Mouse 500] on usb-0000:00:1d.2-1/input0
[    1.699539] usbcore: registered new interface driver usbhid
[    1.699542] usbhid: USB HID core driver
[    2.186051] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.186056] EXT4-fs (sda1): write access will be enabled during recovery
[    2.200289] firewire_core: created device fw0: GUID 00023f9929a55f0c, S400
[   11.044546] EXT4-fs (sda1): recovery complete
[   11.046954] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.909203] Adding 19529724k swap on /dev/sda5.  Priority:-1 extents:1 across:19529724k
[   16.262710] udevd[429]: starting version 175
[   16.443563] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.916525] lp: driver loaded but no devices found
[   18.667086] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   18.667218] [Firmware Bug]: _BCQ is used instead of _BQC
[   18.668772] acpi device:02: registered as cooling_device6
[   18.668968] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   18.669046] ACPI: Video Device [C080] (multi-head: yes  rom: no  post: no)
[   18.789295] wmi: Mapper loaded
[   18.837634] intel_rng: FWH not detected
[   18.925322] lib80211: common routines for IEEE802.11 drivers
[   18.925327] lib80211_crypt: registered algorithm 'NULL'
[   18.964454] leds_ss4200: no LED devices found
[   18.996249] input: HP WMI hotkeys as /devices/virtual/input/input6
[   19.050835] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a2]
[   19.050864] yenta_cardbus 0000:02:06.0: CardBus bridge to [bus 03-06]
[   19.050869] yenta_cardbus 0000:02:06.0:   bridge window [io  0x5400-0x54ff]
[   19.050877] yenta_cardbus 0000:02:06.0:   bridge window [io  0x5000-0x50ff]
[   19.050884] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff pref]
[   19.050891] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xdc800000-0xdcbfffff]
[   19.050900] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[   19.050907] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[   19.050911] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   19.050919] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64
[   19.227183] cfg80211: Calling CRDA to update world regulatory domain
[   19.280889] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[   19.280895] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   19.280901] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   19.280913] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x5000-0x5fff]
[   19.280918] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
[   19.287786] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4100000-0xf43fffff]
[   19.287791] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4100000-0xf43fffff: excluding 0xf4100000-0xf412ffff
[   19.287810] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff pref]
[   19.287814] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbffffff: excluding 0xd8000000-0xdbffffff
[   19.332508] cfg80211: Calling CRDA to update world regulatory domain
[   19.342054] [drm] Initialized drm 1.1.0 20060810
[   19.578136] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[   19.578149] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[   19.624500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[   19.910851] wl: module license 'MIXED/Proprietary' taints kernel.
[   19.910858] Disabling lock debugging due to kernel taint
[   19.938922] wl 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   19.938934] wl 0000:10:00.0: setting latency timer to 64
[   19.941536] malloc in abgphy done
[   19.941767] wl driver 6.20.155.1 (r326264) failed with code 21
[   19.941789] ------------[ cut here ]------------
[   19.941838] kernel BUG at include/net/cfg80211.h:2209!
[   19.941886] invalid opcode: 0000 [#1] SMP
[   19.942000] Modules linked in: wl(P+) snd_rawmidi joydev drm_kms_helper snd_seq_midi_event pcmcia drm cfg80211 snd_seq snd_timer snd_seq_device psmouse snd yenta_socket mac_hid pcmcia_rsrc i2c_algo_bit hp_wmi pcmcia_core serio_raw lib80211 soundcore snd_page_alloc sparse_keymap wmi video lp parport usbhid hid firewire_ohci firewire_core crc_itu_t [last unloaded: cfg80211]
[   19.943230]
[   19.943267] Pid: 667, comm: modprobe Tainted: P           O 3.2.0-36-generic #57-Ubuntu Hewlett-Packard HP Compaq nx7300 (RU375ES#AB8)/30A2
[   19.943420] EIP: 0060:[<f8cb54a0>] EFLAGS: 00010246 CPU: 0
[   19.943499] EIP is at wdev_priv.part.7+0x8/0xa [wl]
[   19.943541] EAX: 00000000 EBX: f311f480 ECX: f311f480 EDX: ef87a890
[   19.943586] ESI: ef87a890 EDI: ef87a80c EBP: f3347cec ESP: f3347cec
[   19.943630]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   19.943673] Process modprobe (pid: 667, ti=f3346000 task=ef81a610 task.ti=f3346000)
[   19.943720] Stack:
[   19.943756]  f3347d00 f8cb4924 f311f480 ef87a890 ef87a80c f3347d14 f8cad57f ef87a800
[   19.944047]  f3a01000 f311f000 f3347dc0 f8cadf48 c104b5b5 00000000 ffff2edc 00000000
[   19.944047]  c191c5d3 f3347d7d f3347db0 00000246 f3347d6e c170b733 00000013 000e5ec7
[   19.944047] Call Trace:
[   19.944047]  [<f8cb4924>] wl_cfg80211_detach+0xc4/0xd0 [wl]
[   19.944047]  [<f8cad57f>] wl_free_if.isra.10+0x1f/0xa0 [wl]
[   19.944047]  [<f8cadf48>] wl_free+0x58/0x250 [wl]
[   19.944047]  [<c104b5b5>] ? console_trylock+0x15/0x60
[   19.944047]  [<f8bcde92>] ? wlc_attach+0xf6c/0xfda [wl]
[   19.944047]  [<f8cb5409>] wl_pci_probe+0x51a/0x53a [wl]
[   19.944047]  [<c15765fd>] ? _raw_spin_lock_irqsave+0x2d/0x40
[   19.944047]  [<c136eab5>] ? pm_runtime_enable+0x45/0x70
[   19.944047]  [<c12bf167>] local_pci_probe+0x47/0xb0
[   19.944047]  [<c12c0668>] pci_device_probe+0x68/0x90
[   19.944047]  [<c1196da7>] ? sysfs_create_link+0x17/0x20
[   19.944047]  [<c136681d>] really_probe+0x4d/0x150
[   19.944047]  [<c136fee9>] ? pm_runtime_barrier+0x49/0xb0
[   19.944047]  [<c1366a5a>] driver_probe_device+0x3a/0x60
[   19.944047]  [<c1366b11>] __driver_attach+0x91/0xa0
[   19.944047]  [<c1366a80>] ? driver_probe_device+0x60/0x60
[   19.944047]  [<c1365b99>] bus_for_each_dev+0x49/0x70
[   19.944047]  [<c1366651>] driver_attach+0x21/0x30
[   19.944047]  [<c1366a80>] ? driver_probe_device+0x60/0x60
[   19.944047]  [<c136632f>] bus_add_driver+0x17f/0x260
[   19.944047]  [<c12c0690>] ? pci_device_probe+0x90/0x90
[   19.944047]  [<c1366fe6>] driver_register+0x66/0x110
[   19.944047]  [<c12c0412>] __pci_register_driver+0x42/0xc0
[   19.944047]  [<f87e6017>] wl_module_init+0x17/0x1000 [wl]
[   19.944047]  [<c1001125>] do_one_initcall+0x35/0x170
[   19.944047]  [<f87e6000>] ? 0xf87e5fff
[   19.944047]  [<c10864ec>] sys_init_module+0xac/0x210
[   19.944047]  [<c15767a4>] syscall_call+0x7/0xb
[   19.944047]  [<c1570000>] ? handle_eviocgbit.isra.6+0x65/0xed
[   19.944047] Code: 8a ff ff 89 d8 e8 d1 8b 60 c8 31 d2 89 f8 e8 48 10 6b c8 58 5b 5e 5f 5d c3 55 89 e5 66 66 66 66 90 0f 0b 55 89 e5 66 66 66 66 90 <0f> 0b 55 89 e5 66 66 66 66 90 0f 0b 55 89 e5 66 66 66 66 90 0f
[   19.944047] EIP: [<f8cb54a0>] wdev_priv.part.7+0x8/0xa [wl] SS:ESP 0068:f3347cec
[   19.948945] ---[ end trace 80ceaea396b90336 ]---
[   20.033126] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   20.035418] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   20.036511] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   20.037310] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   20.038192] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[   20.038431] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[   20.038635] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   20.038840] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   20.261940] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.262011] i915 0000:00:02.0: setting latency timer to 64
[   20.287115] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[   20.287190] [drm] MTRR allocation failed.  Graphics performance may suffer.
[   20.287785] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   20.287844] [drm] Driver supports precise vblank timestamp query.
[   20.287983] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   20.511039] cfg80211: World regulatory domain updated:
[   20.511099] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.511172] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.511245] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.511317] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.511389] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.511461] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.519769] cfg80211: World regulatory domain updated:
[   20.519830] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.519903] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.519975] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.520081] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.520154] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.520226] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.618698] [drm] initialized overlay support
[   20.800752] fbcon: inteldrmfb (fb0) is primary device
[   21.061563] Console: switching to colour frame buffer device 160x50
[   21.066913] fb0: inteldrmfb frame buffer device
[   21.066953] drm: registered panic notifier
[   21.067039] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   21.074073] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   21.074151] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   21.074223] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.074455] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   21.075843] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   21.737727] type=1400 audit(1359961923.272:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=705 comm="apparmor_parser"
[   21.738459] type=1400 audit(1359961923.272:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=705 comm="apparmor_parser"
[   21.738920] type=1400 audit(1359961923.272:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=705 comm="apparmor_parser"
[   30.750722] init: failsafe main process (792) killed by TERM signal
[   31.920612] type=1400 audit(1359961933.456:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=862 comm="apparmor_parser"
[   31.921231] type=1400 audit(1359961933.456:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=862 comm="apparmor_parser"
[   31.921571] type=1400 audit(1359961933.456:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=862 comm="apparmor_parser"
[   32.010353] type=1400 audit(1359961933.544:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=861 comm="apparmor_parser"
[   32.089442] type=1400 audit(1359961933.624:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=867 comm="apparmor_parser"
[   32.090289] type=1400 audit(1359961933.624:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=867 comm="apparmor_parser"
[   32.185565] type=1400 audit(1359961933.720:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=863 comm="apparmor_parser"
[   32.196253] type=1400 audit(1359961933.732:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=863 comm="apparmor_parser"
[   32.197813] type=1400 audit(1359961933.732:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=863 comm="apparmor_parser"
[   32.199139] type=1400 audit(1359961933.732:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=863 comm="apparmor_parser"
[   32.590466] Bluetooth: Core ver 2.16
[   32.590498] NET: Registered protocol family 31
[   32.590501] Bluetooth: HCI device and connection manager initialized
[   32.590505] Bluetooth: HCI socket layer initialized
[   32.590508] Bluetooth: L2CAP socket layer initialized
[   32.590902] Bluetooth: SCO socket layer initialized
[   32.643201] ppdev: user-space parallel port driver
[   32.784694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.784698] Bluetooth: BNEP filters: protocol multicast
[   32.814814] Bluetooth: RFCOMM TTY layer initialized
[   32.814822] Bluetooth: RFCOMM socket layer initialized
[   32.814825] Bluetooth: RFCOMM ver 1.11
[   34.725329] init: gdm main process (970) killed by TERM signal
vsf@Vasfi-Pc:~$


Kod Seç Genişlet

sf@Vasfi-Pc:~$ dmesg | tail
[   32.590505] Bluetooth: HCI socket layer initialized
[   32.590508] Bluetooth: L2CAP socket layer initialized
[   32.590902] Bluetooth: SCO socket layer initialized
[   32.643201] ppdev: user-space parallel port driver
[   32.784694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.784698] Bluetooth: BNEP filters: protocol multicast
[   32.814814] Bluetooth: RFCOMM TTY layer initialized
[   32.814822] Bluetooth: RFCOMM socket layer initialized
[   32.814825] Bluetooth: RFCOMM ver 1.11
[   34.725329] init: gdm main process (970) killed by TERM signal
vsf@Vasfi-Pc:~$

Kod Seç Genişlet

sf@Vasfi-Pc:~$ dmesg | tail
[   32.590505] Bluetooth: HCI socket layer initialized
[   32.590508] Bluetooth: L2CAP socket layer initialized
[   32.590902] Bluetooth: SCO socket layer initialized
[   32.643201] ppdev: user-space parallel port driver
[   32.784694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.784698] Bluetooth: BNEP filters: protocol multicast
[   32.814814] Bluetooth: RFCOMM TTY layer initialized
[   32.814822] Bluetooth: RFCOMM socket layer initialized
[   32.814825] Bluetooth: RFCOMM ver 1.11
[   34.725329] init: gdm main process (970) killed by TERM signal
vsf@Vasfi-Pc:~$

Kod Seç Genişlet

sf@Vasfi-Pc:~$ dmesg | tail
[   32.590505] Bluetooth: HCI socket layer initialized
[   32.590508] Bluetooth: L2CAP socket layer initialized
[   32.590902] Bluetooth: SCO socket layer initialized
[   32.643201] ppdev: user-space parallel port driver
[   32.784694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.784698] Bluetooth: BNEP filters: protocol multicast
[   32.814814] Bluetooth: RFCOMM TTY layer initialized
[   32.814822] Bluetooth: RFCOMM socket layer initialized
[   32.814825] Bluetooth: RFCOMM ver 1.11
[   34.725329] init: gdm main process (970) killed by TERM signal
vsf@Vasfi-Pc:~$


[ct]

Kablosuz ağ hem yazılımdan hem donanımdan kapalı görünüyor. İkisini de açmayı deneyebilirsiniz. fn tuş kombinasyonu veya kartın etrafındaki bir buton olabilir.

Kod Seç Genişlet

0: hp-wifi: Wireless LAN
   Soft blocked: yes
   Hard blocked: yes

Şöyle bir şey bulum:

http://askubuntu.com/questions/14970/broadcom-bcm4401-b0-100base-tx-issues

Şunun çıktısını verebilir misiniz?

Kod Seç Genişlet

cat /etc/modprobe.d/broadcom-sta-common.conf

Komutları kod etiketinin içinde verirseniz daha okunaklı olacaktır. Yazarken menüdeki # butonunu kullanabilirsiniz.

[mvasfi]

herhangi br tuş yok bir tek wireless içğn bir tuş var bluetooth için wirelesii açıp kapatıyor oda kapalı tmm birde açıp çıktı almayı deneyeceğim...

[ct]

herhangi br tuş yok bir tek wireless içğn bir tuş var bluetooth için wirelesii açıp kapatıyor oda kapalı *tamam birde açıp çıktı almayı deneyeceğim...

Kod Seç Genişlet

cat /etc/modprobe.d/broadcom-sta-common.conf

Çıktısını da verebilir misiniz?

Kablosuz için yukarıdaki sağ menüden aktif hale getirmeniz de gerekebilir.

[mvasfi]

Bluetooth düğmesini açtığımda cvp böyle oldu yukarıdaki düğmelerlede bir alakası yok bence birde /etc/modprobe.d/broadcom-sta-common.conf diye bir dosya yok en yakın dosyanın içinde bu vardı...


sf@Vasfi-Pc:~$ rfkill list
0: hp-wifi: Wireless LAN
   Soft blocked: yes
   Hard blocked: no
1: hp-bluetooth: Bluetooth
   Soft blocked: no
   Hard blocked: no
2: hci0: Bluetooth
   Soft blocked: no
   Hard blocked: no
vsf@Vasfi-Pc:~$

blacklist b43
blacklist b43legacy
blacklist ssb
blacklist bcm43xx
blacklist brcm80211
blacklist brcmfmac
blacklist brcmsmac
blacklist bcma
blacklist b44
install wl modprobe -r b43 b44 b43legacy ssb; modprobe --ignore-install wl ; modprobe --ignore-install b44

[ct]

Kod Seç Genişlet


blacklist b43
blacklist b43legacy
blacklist ssb
blacklist bcm43xx
blacklist brcm80211
blacklist brcmfmac
blacklist brcmsmac
blacklist bcma
blacklist b44
install wl modprobe -r b43 b44 b43legacy ssb; modprobe --ignore-install wl ; modprobe --ignore-install b44

b44 kara listeye alınmış. Ancak wl kurulumu da --ignore-install halinde. Çözemedim bunu.

Kablosuz tuşla açılmış gözüküyor. Ancak yazılımsal olarak kapalı hala.

[mvasfi]

kara listeden çıkartmanın yolu nedir...

[ct]

Öncelikle blacklist dosyasının yedeğini alın. Ardından listeden çıkarmak istedğinizi # ile geçersiz yapıp kaydedin.

Kod Seç Genişlet

sudo gedit /etc/modprobe.d/blacklistdosyasının-adı

İle o dosyayı açıp düzenlemeleri yapabilirsiniz. Geçersiz yapılmış satır şuna benzer olacaktır:

Kod Seç Genişlet

#blacklist b44

Bilgisayarı yeniden açmak gerekebilir.

[mvasfi]

Sağolun bu şekile getirerek çözebildim ...


# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
blacklist b43
blacklist b43legacy
blacklist ssb
#blacklist bcm43xx
blacklist brcm80211
blacklist brcmfmac
blacklist brcmsmac
blacklist bcma
#blacklist b44
#install wl modprobe -r b43 b44 b43legacy ssb; modprobe --ignore-#install wl ; modprobe --ignore-install b44

[ct]

Rica ederim. Sorun çözüldüyse başlığı çözüldü olarak etiketleyebilirsiniz.

http://forum.ubuntu-tr.net/index.php?topic=31789.0

[burk]

Ayrıca uçbirim çıktıları için kod etiketi kullanın lütfen; http://forum.ubuntu-tr.net/index.php?topic=14283.0