Ubuntu 10.04 Açılırken hata

Başlatan erolg, 30 Aralık 2012 - 18:42:52

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

erolg

Kernel çekirdeği boot edildikten sonra şöyle bir hata alıyorum daha sonrasında kullanıcı arayüzü geliyor.

[   16.423276] ata1.00: exception Emask 0x0 SAct 0x3f SErr 0x0 action 0x0
[   16.423404] ata1.00: irq_stat 0x40000008
[   16.423483] ata1.00: failed command: READ FPDMA QUEUED
[   16.423587] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   16.423590]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   16.423864] ata1.00: status: { DRDY ERR }
[   16.423941] ata1.00: error: { UNC }
[   16.435861] ata1.00: configured for UDMA/133
[   16.435901] ata1: EH complete
[   16.518103] rtl819xSE 0000:13:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
[   16.725238] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 4
[   18.499774] ata1.00: exception Emask 0x0 SAct 0x27 SErr 0x0 action 0x0
[   18.499926] ata1.00: irq_stat 0x40000008
[   18.500006] ata1.00: failed command: READ FPDMA QUEUED
[   18.500138] ata1.00: cmd 60/08:28:d8:09:ae/00:00:02:00:00/40 tag 5 ncq 4096 in
[   18.500142]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   18.500470] ata1.00: status: { DRDY ERR }
[   18.500547] ata1.00: error: { UNC }
[   18.512379] ata1.00: configured for UDMA/133
[   18.512417] ata1: EH complete
[   20.498147] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0
[   20.498272] ata1.00: irq_stat 0x40000008
[   20.498351] ata1.00: failed command: READ FPDMA QUEUED
[   20.498455] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   20.498458]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   20.498731] ata1.00: status: { DRDY ERR }
[   20.498808] ata1.00: error: { UNC }
[   20.510710] ata1.00: configured for UDMA/133
[   20.510744] ata1: EH complete
[   20.704906] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input9
[   22.497682] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0
[   22.497833] ata1.00: irq_stat 0x40000008
[   22.497913] ata1.00: failed command: READ FPDMA QUEUED
[   22.498017] ata1.00: cmd 60/08:18:d8:09:ae/00:00:02:00:00/40 tag 3 ncq 4096 in
[   22.498020]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   22.498293] ata1.00: status: { DRDY ERR }
[   22.498370] ata1.00: error: { UNC }
[   22.510236] ata1.00: configured for UDMA/133
[   22.510272] ata1: EH complete
[   24.463455] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0
[   24.463605] ata1.00: irq_stat 0x40000008
[   24.463684] ata1.00: failed command: READ FPDMA QUEUED
[   24.463788] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   24.463791]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   24.464096] ata1.00: status: { DRDY ERR }
[   24.464203] ata1.00: error: { UNC }
[   24.476097] ata1.00: configured for UDMA/133
[   24.476116] ata1: EH complete
[   26.561740] ata1.00: exception Emask 0x0 SAct 0x9 SErr 0x0 action 0x0
[   26.561890] ata1.00: irq_stat 0x40000008
[   26.561970] ata1.00: failed command: READ FPDMA QUEUED
[   26.562074] ata1.00: cmd 60/08:18:d8:09:ae/00:00:02:00:00/40 tag 3 ncq 4096 in
[   26.562077]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   26.562351] ata1.00: status: { DRDY ERR }
[   26.562427] ata1.00: error: { UNC }
[   26.574269] ata1.00: configured for UDMA/133
[   26.574309] sd 0:0:0:0: [sda] Unhandled sense code
[   26.574314] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   26.574321] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[   26.574331] Descriptor sense data with sense descriptors (in hex):
[   26.574336]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[   26.574355]         02 ae 09 de
[   26.574364] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[   26.574374] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 02 ae 09 d8 00 00 08 00
[   26.574392] end_request: I/O error, dev sda, sector 44960222
[   26.574527] ata1: EH complete
[   26.758295] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   26.767985] ===>rtllib_start_scan()
[   26.768631] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.773227]   alloc irq_desc for 28 on node -1
[   26.773236]   alloc kstat_irqs on node -1
[   26.773264] jme 0000:14:00.5: irq 28 for MSI/MSI-X
[   26.773601] eth0: Link is down.
[   26.774169] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.785705] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   28.785857] ata1.00: irq_stat 0x40000008
[   28.785937] ata1.00: failed command: READ FPDMA QUEUED
[   28.786041] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   28.786044]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   28.786317] ata1.00: status: { DRDY ERR }
[   28.786394] ata1.00: error: { UNC }
[   28.798235] ata1.00: configured for UDMA/133
[   28.798266] ata1: EH complete
[   30.758385] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   30.758536] ata1.00: irq_stat 0x40000008
[   30.758615] ata1.00: failed command: READ FPDMA QUEUED
[   30.758719] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   30.758722]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   30.758996] ata1.00: status: { DRDY ERR }
[   30.759073] ata1.00: error: { UNC }
[   30.770912] ata1.00: configured for UDMA/133
[   30.770944] ata1: EH complete
[   32.724175] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   32.724324] ata1.00: irq_stat 0x40000008
[   32.724403] ata1.00: failed command: READ FPDMA QUEUED
[   32.724507] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   32.724510]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   32.724784] ata1.00: status: { DRDY ERR }
[   32.724860] ata1.00: error: { UNC }
[   32.736691] ata1.00: configured for UDMA/133
[   32.736716] ata1: EH complete
[   34.689958] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   34.690108] ata1.00: irq_stat 0x40000008
[   34.690187] ata1.00: failed command: READ FPDMA QUEUED
[   34.690291] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   34.690294]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   34.690568] ata1.00: status: { DRDY ERR }
[   34.690644] ata1.00: error: { UNC }
[   34.702473] ata1.00: configured for UDMA/133
[   34.702502] ata1: EH complete
[   36.655756] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   36.658597] ata1.00: irq_stat 0x40000008
[   36.661391] ata1.00: failed command: READ FPDMA QUEUED
[   36.664187] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   36.664191]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   36.669845] ata1.00: status: { DRDY ERR }
[   36.672625] ata1.00: error: { UNC }
[   36.687157] ata1.00: configured for UDMA/133
[   36.687181] ata1: EH complete
[   38.632603] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   38.635447] ata1.00: irq_stat 0x40000008
[   38.638226] ata1.00: failed command: READ FPDMA QUEUED
[   38.640965] ata1.00: cmd 60/08:00:d8:09:ae/00:00:02:00:00/40 tag 0 ncq 4096 in
[   38.640968]          res 41/40:00:de:09:ae/00:00:02:00:00/40 Emask 0x409 (media error) <F>
[   38.646578] ata1.00: status: { DRDY ERR }
[   38.649417] ata1.00: error: { UNC }
[   38.663878] ata1.00: configured for UDMA/133
[   38.663911] sd 0:0:0:0: [sda] Unhandled sense code
[   38.663917] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   38.663924] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[   38.663934] Descriptor sense data with sense descriptors (in hex):
[   38.663939]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[   38.663958]         02 ae 09 de
[   38.663967] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[   38.663977] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 02 ae 09 d8 00 00 08 00
[   38.663995] end_request: I/O error, dev sda, sector 44960222
[   38.666817] ata1: EH complete
[   38.905593] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1




burk


agg1401

Bu hata benim bilgisayarda da var, bu bad sector hatasi olabilecek anlamina mi geliyor?

if

@agg1401, ata1.00: error: { UNC } bozuk sektöre işaret ediyormuş.

agg1401

Yeni bir HDD'ye yol göründü gibi.