[Çözüldü] Kablosuz ağlara ikinci kez bağlanamama

[jeopol]

öncelikle herkese merhabalar.

Ubuntu 12.10 sürümünü kullanıyorum.Ancak ilginç bir kablosuz bağlantı sorunum var.Şöyle ki kablosuz internet ağlarının tümüne bağlanabiliyorum.Ancak bağlandığım ağ bağlantısı kesilirse veya bağlandığım ağdan ayrılıp tekrar bağlanmak istediğimde ağa bağlanamıyorum.Ağa tekrar bağlanabilmem için ubuntuyu(dolayısıyla bilgisayarı-oturum kapatıp açınca yine aynı sorun devam ediyor) tekrar başlatmam gerekiyor.Forumda biraz göz gezdirdim bunun gibi soruna rastlamadım(ya da gözümden kaçmış olabilir).

sorunu çözmek için bilgisi veya önerisi olan varsa  yardımcı olurlarsa çok sevinirim.

http://forum.ubuntu-tr.net/index.php?topic=28764.0  şu konudaki çıktıları ekliyorum.

Kod Seç Genişlet


cat /etc/lsb-release


DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.10
DISTRIB_CODENAME=quantal
DISTRIB_DESCRIPTION="Ubuntu 12.10"

uname -a

Linux erdem-R520-R522-R620 3.5.0-21-generic #32-Ubuntu SMP Tue Dec 11 18:51:59 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

lspci

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M96 [Mobility Radeon HD 4650]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8192E/RTL8192SE Wireless LAN Controller (rev 01)
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10)

lsusb


Bus 001 Device 002: ID 0ac8:c335 Z-Star Microelectronics Corp.
Bus 002 Device 003: ID 0bb4:0cac HTC (High Tech Computer Corp.)
Bus 006 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 008 Device 002: ID 0a5c:2151 Broadcom Corp. Bluetooth
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

rfkill list


0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: samsung-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no

sudo lshw -C network


  *-network               
       açıklama: Kablosuz arayüz
       ürün: RTL8192E/RTL8192SE Wireless LAN Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: wlan0
       sürüm: 01
       serial: 00:24:d2:ca:12:02
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl819xE driverversion=0014.0401.2010 ip=192.168.1.211 latency=0 link=yes multicast=yes wireless=802.11bg
       kaynaklar: irq:16 ioport:3000(boyut=256) bellek:f6000000-f6003fff
  *-network
       açıklama: Eternet interface
       ürün: 88E8057 PCI-E Gigabit Ethernet Controller
       üretici: Marvell Technology Group Ltd.
       physical id: 0
       bus info: pci@0000:06:00.0
       mantıksal ad: eth0
       sürüm: 10
       serial: 00:24:54:06:4a:4d
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list rom eternet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 latency=0 link=no multicast=yes port=twisted pair
       kaynaklar: irq:45 bellek:fa000000-fa003fff ioport:5000(boyut=256) bellek:f4000000-f401ffff

ifconfig


eth0      Link encap:Ethernet  HWaddr 00:24:54:06:4a:4d 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:19

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1140 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1140 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:100683 (100.6 KB)  TX bytes:100683 (100.6 KB)

wlan0     Link encap:Ethernet  HWaddr 00:24:d2:ca:12:02 
          inet addr:192.168.1.211  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::224:d2ff:feca:1202/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:21621 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19719 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:25684899 (25.6 MB)  TX bytes:2186954 (2.1 MB)
          Interrupt:16 Hafıza:ffffc90000678000-ffffc90000678100

iwconfig

eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     802.11bg  ESSID:"farketmez"  Nickname:"rtl8192E"
          Mode:Managed  Frequency=2.457 GHz  Access Point: 00:02:61:81:98:66   
          Bit Rate=1 Mb/s   
          Retry:on   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=30/100  Signal level=-62 dBm  Noise level=-85 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

iwlist scanning

eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 00:02:61:81:98:66
                    ESSID:"farketmez"
                    Protocol:IEEE802.11bg
                    Mode:Master
                    Channel:11
                    Encryption key:on
                    Bit Rates:54 Mb/s
                    Extra: Rates (Mb/s): 1 2 5.5 11 6 9 12 18 24 36 48 54
                    Quality=86/100  Signal level=-55 dBm  Noise level=-113 dBm
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    Extra: Last beacon: 19ms ago

lsmod

Module                  Size  Used by
michael_mic            12612  8
arc4                   12529  4
rtllib_crypt_tkip      17179  0
rtllib_crypt_ccmp      12829  0
snd_hda_codec_hdmi     32007  1
coretemp               13400  0
kvm_intel             132759  0
kvm                   414070  1 kvm_intel
parport_pc             32688  0
ppdev                  17073  0
bnep                   18140  2
rfcomm                 46619  12
samsung_laptop         14532  0
snd_hda_codec_realtek    78045  1
binfmt_misc            17500  1
snd_hda_intel          33491  7
snd_hda_codec         134212  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm                96580  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13324  0
snd_rawmidi            30512  1 snd_seq_midi
microcode              22803  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61521  2 snd_seq_midi,snd_seq_midi_event
joydev                 17457  0
video                  19335  1 samsung_laptop
btusb                  22474  0
bluetooth             209199  22 bnep,rfcomm,btusb
snd_timer              29425  2 snd_pcm,snd_seq
snd_seq_device         14497  3 snd_seq_midi,snd_rawmidi,snd_seq
uvcvideo               76749  0
videobuf2_core         32851  1 uvcvideo
videodev              120309  2 uvcvideo,videobuf2_core
r8192e_pci            219124  0
rtllib                155950  1 r8192e_pci
lib80211               14381  3 rtllib_crypt_tkip,rtllib_crypt_ccmp,rtllib
radeon                895692  3
rtl8192se              63284  0
snd                    78734  23 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac_hid                13205  0
psmouse                95552  0
rtlwifi                74705  1 rtl8192se
videobuf2_vmalloc      12860  1 uvcvideo
mac80211              539908  2 rtl8192se,rtlwifi
videobuf2_memops       13368  1 videobuf2_vmalloc
ttm                    83595  1 radeon
serio_raw              13215  0
drm_kms_helper         49112  1 radeon
drm                   288670  5 radeon,ttm,drm_kms_helper
lpc_ich                17061  0
i2c_algo_bit           13413  1 radeon
cfg80211              206566  2 rtlwifi,mac80211
soundcore              15047  1 snd
snd_page_alloc         18484  2 snd_hda_intel,snd_pcm
lp                     17759  0
parport                46345  3 parport_pc,ppdev,lp
hid_generic            12493  0
usbhid                 46947  0
hid                   100366  2 hid_generic,usbhid
sky2                   58111  0
usb_storage            48838  0


dmesg

[    0.297149] ACPI: Lid Switch [LID0]
[    0.297183] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.297186] ACPI: Power Button [PWRB]
[    0.297220] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.297223] ACPI: Sleep Button [SLPB]
[    0.297257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.297259] ACPI: Power Button [PWRF]
[    0.297315] ACPI: Fan [FAN0] (off)
[    0.297342] ACPI: Fan [FAN1] (off)
[    0.297384] ACPI: Requesting acpi_cpufreq
[    0.330795] Freeing initrd memory: 14872k freed
[    0.337850] Monitor-Mwait will be used to enter C-1 state
[    0.337870] Monitor-Mwait will be used to enter C-2 state
[    0.337879] Marking TSC unstable due to TSC halts in idle
[    0.337888] ACPI: acpi_idle registered with cpuidle
[    0.341266] thermal LNXTHERM:00: registered as thermal_zone0
[    0.341269] ACPI: Thermal Zone [TZ00] (61 C)
[    0.341982] thermal LNXTHERM:01: registered as thermal_zone1
[    0.341984] ACPI: Thermal Zone [TZ01] (61 C)
[    0.341999] ACPI: Battery Slot [BAT1] (battery present)
[    0.342022] GHES: HEST is not enabled!
[    0.342107] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.343979] Linux agpgart interface v0.103
[    0.345388] ACPI: Battery Slot [BAT1] (battery present)
[    0.345756] brd: module loaded
[    0.346427] loop: module loaded
[    0.346528] ahci 0000:00:1f.2: version 3.0
[    0.346591] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    0.346641] ahci: SSS flag set, parallel bus scan disabled
[    0.346676] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.346679] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[    0.346684] ahci 0000:00:1f.2: setting latency timer to 64
[    0.368433] scsi0 : ahci
[    0.368510] scsi1 : ahci
[    0.368574] scsi2 : ahci
[    0.368639] scsi3 : ahci
[    0.368699] scsi4 : ahci
[    0.368762] scsi5 : ahci
[    0.368805] ata1: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204100 irq 44
[    0.368808] ata2: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204180 irq 44
[    0.368809] ata3: DUMMY
[    0.368810] ata4: DUMMY
[    0.368813] ata5: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204300 irq 44
[    0.368815] ata6: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204380 irq 44
[    0.369143] Fixed MDIO Bus: probed
[    0.369181] tun: Universal TUN/TAP device driver, 1.6
[    0.369182] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.369231] PPP generic driver version 2.4.2
[    0.369274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.369310] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.369313] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.369319] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.369350] ehci_hcd 0000:00:1a.7: debug port 1
[    0.373248] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.373261] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc204800
[    0.384018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.384035] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.384038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.384039] usb usb1: Product: EHCI Host Controller
[    0.384042] usb usb1: Manufacturer: Linux 3.5.0-21-generic ehci_hcd
[    0.384044] usb usb1: SerialNumber: 0000:00:1a.7
[    0.384129] hub 1-0:1.0: USB hub found
[    0.384135] hub 1-0:1.0: 6 ports detected
[    0.384209] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.384213] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.384217] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.384242] ehci_hcd 0000:00:1d.7: debug port 1
[    0.388142] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.388154] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc204c00
[    0.400017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.400050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.400052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.400054] usb usb2: Product: EHCI Host Controller
[    0.400056] usb usb2: Manufacturer: Linux 3.5.0-21-generic ehci_hcd
[    0.400060] usb usb2: SerialNumber: 0000:00:1d.7
[    0.400154] hub 2-0:1.0: USB hub found
[    0.400160] hub 2-0:1.0: 6 ports detected
[    0.400222] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.400237] uhci_hcd: USB Universal Host Controller Interface driver
[    0.400255] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.400258] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.400265] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.400299] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.400330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.400332] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.400334] usb usb3: Product: UHCI Host Controller
[    0.400336] usb usb3: Manufacturer: Linux 3.5.0-21-generic uhci_hcd
[    0.400338] usb usb3: SerialNumber: 0000:00:1a.0
[    0.400415] hub 3-0:1.0: USB hub found
[    0.400419] hub 3-0:1.0: 2 ports detected
[    0.400478] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.400482] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.400486] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.400518] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.400550] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.400552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.400554] usb usb4: Product: UHCI Host Controller
[    0.400556] usb usb4: Manufacturer: Linux 3.5.0-21-generic uhci_hcd
[    0.400558] usb usb4: SerialNumber: 0000:00:1a.1
[    0.400632] hub 4-0:1.0: USB hub found
[    0.400635] hub 4-0:1.0: 2 ports detected
[    0.400693] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.400696] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.400700] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.400725] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[    0.400756] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.400758] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.400760] usb usb5: Product: UHCI Host Controller
[    0.400762] usb usb5: Manufacturer: Linux 3.5.0-21-generic uhci_hcd
[    0.400764] usb usb5: SerialNumber: 0000:00:1a.2
[    0.400841] hub 5-0:1.0: USB hub found
[    0.400844] hub 5-0:1.0: 2 ports detected
[    0.400905] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.400908] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.400913] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.400936] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.400965] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.400967] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.400969] usb usb6: Product: UHCI Host Controller
[    0.400971] usb usb6: Manufacturer: Linux 3.5.0-21-generic uhci_hcd
[    0.400973] usb usb6: SerialNumber: 0000:00:1d.0
[    0.401049] hub 6-0:1.0: USB hub found
[    0.401053] hub 6-0:1.0: 2 ports detected
[    0.401109] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.401112] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.401117] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.401143] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.401172] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.401174] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.401176] usb usb7: Product: UHCI Host Controller
[    0.401178] usb usb7: Manufacturer: Linux 3.5.0-21-generic uhci_hcd
[    0.401180] usb usb7: SerialNumber: 0000:00:1d.1
[    0.401249] hub 7-0:1.0: USB hub found
[    0.401253] hub 7-0:1.0: 2 ports detected
[    0.401311] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.401314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.401318] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.401352] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.401383] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.401386] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.401388] usb usb8: Product: UHCI Host Controller
[    0.401389] usb usb8: Manufacturer: Linux 3.5.0-21-generic uhci_hcd
[    0.401391] usb usb8: SerialNumber: 0000:00:1d.2
[    0.401462] hub 8-0:1.0: USB hub found
[    0.401466] hub 8-0:1.0: 2 ports detected
[    0.401563] usbcore: registered new interface driver libusual
[    0.401593] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.403950] i8042: Detected active multiplexing controller, rev 1.1
[    0.405072] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.405077] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.405102] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.405121] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.405140] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.405238] mousedev: PS/2 mouse device common for all mice
[    0.405544] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.405573] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.405642] device-mapper: uevent: version 1.0.3
[    0.405701] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.405732] cpuidle: using governor ladder
[    0.405765] cpuidle: using governor menu
[    0.405767] EFI Variables Facility v0.08 2004-May-17
[    0.405961] ashmem: initialized
[    0.406074] TCP: cubic registered
[    0.406169] NET: Registered protocol family 10
[    0.406339] NET: Registered protocol family 17
[    0.406353] Key type dns_resolver registered
[    0.406498] PM: Hibernation image not present or could not be loaded.
[    0.406510] registered taskstats version 1
[    0.408739] Key type trusted registered
[    0.410324] Key type encrypted registered
[    0.412381]   Magic number: 8:232:446
[    0.412504] rtc_cmos 00:07: setting system clock to 2012-12-24 19:25:36 UTC (1356377136)
[    0.412964] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.412966] EDD information not available.
[    0.428221] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.688045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.696052] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[    0.735309] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[    0.735311] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    0.737501] ata1.00: configured for UDMA/133
[    0.737643] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[    0.737740] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.737763] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.737779] sd 0:0:0:0: [sda] Write Protect is off
[    0.737782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.737799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.785980]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    0.786456] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.849068] usb 1-3: New USB device found, idVendor=0ac8, idProduct=c335
[    0.849072] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.849075] usb 1-3: Product: Namuga 1.3M Webcam
[    0.849078] usb 1-3: Manufacturer: Vimicro Corp.
[    1.056058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.057434] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633B, SC00, max UDMA/100
[    1.057438] ata2.00: applying bridge limits
[    1.058213] ata2.00: configured for UDMA/100
[    1.061141] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633B  SC00 PQ: 0 ANSI: 5
[    1.064021] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.064025] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.064135] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.064190] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.072044] usb 2-3: new high-speed USB device number 3 using ehci_hcd
[    1.211457] usb 2-3: New USB device found, idVendor=0bb4, idProduct=0cac
[    1.211461] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    1.211468] usb 2-3: Product: Android Phone
[    1.211471] usb 2-3: Manufacturer: HTC
[    1.211474] usb 2-3: SerialNumber: HT12TTD05335
[    1.222897] Initializing USB Mass Storage driver...
[    1.223001] scsi6 : usb-storage 2-3:1.0
[    1.223052] usbcore: registered new interface driver usb-storage
[    1.223054] USB Mass Storage support registered.
[    1.384058] ata5: SATA link down (SStatus 0 SControl 300)
[    1.572033] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[    1.704042] ata6: SATA link down (SStatus 0 SControl 300)
[    1.705199] Freeing unused kernel memory: 932k freed
[    1.705432] Write protecting the kernel read-only data: 12288k
[    1.709219] Freeing unused kernel memory: 1464k freed
[    1.712398] Freeing unused kernel memory: 1120k freed
[    1.726233] udevd[107]: starting version 175
[    1.754994] usb 6-1: New USB device found, idVendor=046d, idProduct=c52f
[    1.755003] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.755005] usb 6-1: Product: USB Receiver
[    1.755007] usb 6-1: Manufacturer: Logitech
[    1.773776] sky2: driver version 1.30
[    1.773962] sky2 0000:06:00.0: Yukon-2 UL 2 chip revision 0
[    1.774464] sky2 0000:06:00.0: irq 45 for MSI/MSI-X
[    1.777235] sky2 0000:06:00.0: eth0: addr 00:24:54:06:4a:4d
[    1.832078] usbcore: registered new interface driver usbhid
[    1.832081] usbhid: USB HID core driver
[    1.833843] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input5
[    1.833951] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[    1.837115] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input6
[    1.837214] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[    2.000036] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[    2.175402] usb 8-2: New USB device found, idVendor=0a5c, idProduct=2151
[    2.175408] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.175411] usb 8-2: Product: BCM2046 Bluetooth Device
[    2.175414] usb 8-2: Manufacturer: Broadcom Corp
[    2.175417] usb 8-2: SerialNumber: 00265ED6A1FA
[    2.176974] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    2.231110] scsi 6:0:0:0: Direct-Access     HTC      Android Phone    0000 PQ: 0 ANSI: 2
[    2.231769] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.233125] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   24.021887] Adding 4788904k swap on /dev/sda5.  Priority:-1 extents:1 across:4788904k
[   24.029474] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.089393] udevd[459]: starting version 175
[   24.168252] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   24.168258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.168260] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   24.168264] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   24.168267] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.168270] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   24.168274] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.168275] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   24.169055] [drm] Initialized drm 1.1.0 20060810
[   24.172801] lp: driver loaded but no devices found
[   24.179637] cfg80211: Calling CRDA to update world regulatory domain
[   24.196202] lib80211: common routines for IEEE802.11 drivers
[   24.196206] lib80211_crypt: registered algorithm 'NULL'
[   24.196433] rtllib: module is from the staging directory, the quality is unknown, you have been warned.
[   24.202435] r8192e_pci: module is from the staging directory, the quality is unknown, you have been warned.
[   24.203125]
[   24.203125] Linux kernel driver for RTL8192E WLAN cards
[   24.203127] Copyright (c) 2007-2008, Realsil Wlan Driver
[   24.205193] Linux video capture interface: v2.00
[   24.206654] uvcvideo: Found UVC 1.00 device Namuga 1.3M Webcam (0ac8:c335)
[   24.208129] [drm] radeon defaulting to kernel modesetting.
[   24.208134] [drm] radeon kernel modesetting enabled.
[   24.208412] [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x144D:0xC050).
[   24.208438] [drm] register mmio base: 0xCFEF0000
[   24.208440] [drm] register mmio size: 65536
[   24.208570] ATOM BIOS: Samsung_Bonn_EXT_M96M2_DDR3
[   24.208596] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   24.208598] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   24.210077] [drm] Detected VRAM RAM=1024M, BAR=256M
[   24.210081] [drm] RAM width 128bits DDR
[   24.210658] input: Namuga 1.3M Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7
[   24.210790] usbcore: registered new interface driver uvcvideo
[   24.210792] USB Video Class driver (1.1.1)
[   24.213606] Memory mapped space start: 0xf6000000
[   24.214715] [TTM] Zone  kernel: Available graphics memory: 2006922 kiB
[   24.214717] [TTM] Initializing pool allocator
[   24.214722] [TTM] Initializing DMA pool allocator
[   24.214747] [drm] radeon: 1024M of VRAM memory ready
[   24.214749] [drm] radeon: 512M of GTT memory ready.
[   24.214767] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   24.214769] [drm] Driver supports precise vblank timestamp query.
[   24.215689] type=1400 audit(1356369960.299:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=524 comm="apparmor_parser"
[   24.216057] type=1400 audit(1356369960.303:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=524 comm="apparmor_parser"
[   24.216247] type=1400 audit(1356369960.303:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=524 comm="apparmor_parser"
[   24.217194] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[   24.217210] radeon 0000:01:00.0: radeon: using MSI.
[   24.217246] [drm] radeon: irq initialized.
[   24.217251] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   24.218007] [drm] Loading RV730 Microcode
[   24.275044] Bluetooth: Core ver 2.16
[   24.275061] NET: Registered protocol family 31
[   24.275063] Bluetooth: HCI device and connection manager initialized
[   24.275065] Bluetooth: HCI socket layer initialized
[   24.275066] Bluetooth: L2CAP socket layer initialized
[   24.275071] Bluetooth: SCO socket layer initialized
[   24.295622] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   24.328966] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   24.338037] usbcore: registered new interface driver btusb
[   24.345403] acpi device:03: registered as cooling_device4
[   24.345467] ACPI: Video Device [NVID] (multi-head: yes  rom: no  post: no)
[   24.348405] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[   24.353844] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[   24.372381] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   24.442915] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   24.452448] samsung_laptop: detected SABI interface: SwSmi@
[   24.452451] samsung_laptop: Backlight controlled by ACPI video driver
[   24.465770] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   24.534341] Bluetooth: RFCOMM TTY layer initialized
[   24.534347] Bluetooth: RFCOMM socket layer initialized
[   24.534349] Bluetooth: RFCOMM ver 1.11
[   24.541461] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.541465] Bluetooth: BNEP filters: protocol multicast
[   24.560865] init: failsafe main process (759) killed by TERM signal
[   24.582790] ppdev: user-space parallel port driver
[   24.627879] type=1400 audit(1356369960.711:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=880 comm="apparmor_parser"
[   24.628409] type=1400 audit(1356369960.715:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=880 comm="apparmor_parser"
[   24.640363] cfg80211: World regulatory domain updated:
[   24.640367] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.640369] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.640371] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.640373] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.640375] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.640376] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.656234] type=1400 audit(1356369960.743:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=895 comm="apparmor_parser"
[   24.656512] type=1400 audit(1356369960.743:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=895 comm="apparmor_parser"
[   24.658149] type=1400 audit(1356369960.743:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=894 comm="apparmor_parser"
[   24.658427] type=1400 audit(1356369960.743:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=894 comm="apparmor_parser"
[   24.661705] type=1400 audit(1356369960.747:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=901 comm="apparmor_parser"
[   24.746899] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[   24.749166] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   24.758991] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   24.759060] radeon 0000:01:00.0: WB enabled
[   24.759063] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88011f60ac00
[   24.805276] [drm] ring test on 0 succeeded in 1 usecs
[   24.805668] [drm] ib test on ring 0 succeeded in 0 usecs
[   24.806273] [drm] Radeon Display Connectors
[   24.806275] [drm] Connector 0:
[   24.806277] [drm]   LVDS-1
[   24.806279] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   24.806280] [drm]   Encoders:
[   24.806281] [drm]     LCD1: INTERNAL_UNIPHY2
[   24.806282] [drm] Connector 1:
[   24.806283] [drm]   VGA-1
[   24.806285] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   24.806286] [drm]   Encoders:
[   24.806287] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   24.806288] [drm] Connector 2:
[   24.806289] [drm]   HDMI-A-1
[   24.806290] [drm]   HPD1
[   24.806292] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[   24.806293] [drm]   Encoders:
[   24.806294] [drm]     DFP1: INTERNAL_UNIPHY
[   24.806366] [drm] radeon: power management initialized
[   24.923903] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
[   24.960627] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[   25.792052] [drm] fb mappable at 0xD0142000
[   25.792057] [drm] vram apper at 0xD0000000
[   25.792058] [drm] size 4325376
[   25.792059] [drm] fb depth is 24
[   25.792060] [drm]    pitch is 5632
[   25.792192] fbcon: radeondrmfb (fb0) is primary device
[   25.792359] Console: switching to colour frame buffer device 170x48
[   25.792387] fb0: radeondrmfb frame buffer device
[   25.792388] drm: registered panic notifier
[   25.792396] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
[   25.792723] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[   25.792810] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   25.823202] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   25.838581] init: gdm main process (1213) killed by TERM signal
[   25.931520] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.932912] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.024117] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.028538] sky2 0000:06:00.0: eth0: enabling interface
[   27.029442] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.323508] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.227616] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.138293] Linking with farketmez,channel:10, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   34.138301] Linking with farketmez,channel:10, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   34.138479] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   36.656043] Linking with farketmez,channel:10, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   36.656052] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   39.176043] Linking with farketmez,channel:10, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   39.176052] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   41.696025] Linking with farketmez,channel:10, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   41.700430] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   41.717088] Linking with farketmez,channel:10, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   41.717097] Linking with farketmez,channel:10, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   41.717541] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   41.744090] Associated successfully
[   41.744093] normal associate
[   41.744100] Using G rates:108
[   41.744102] Successfully associated, ht not enabled(0, 0)
[   41.744655] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.748595] RX: IEEE802.1X EAPOL frame!
[   41.763192] RX: IEEE802.1X EAPOL frame!
[   41.763340] alg name:R-CCMP
[   41.765095] rtllib_crypt_ccmp: module is from the staging directory, the quality is unknown, you have been warned.
[   41.765558] lib80211_crypt: registered algorithm 'R-CCMP'
[   41.815622] RX: IEEE802.1X EAPOL frame!
[   41.815753] alg name:R-TKIP
[   41.819453] rtllib_crypt_tkip: module is from the staging directory, the quality is unknown, you have been warned.
[   41.819637] lib80211_crypt: registered algorithm 'R-TKIP'
[   42.252184] dm_check_edca_turbo():iot peer is unknown, bssid: 00:02:61:81:98:66
[  539.515358] RX: IEEE802.1X EAPOL frame!
[  539.515708] alg name:R-TKIP


dmesg | tail

[   41.763340] alg name:R-CCMP
[   41.765095] rtllib_crypt_ccmp: module is from the staging directory, the quality is unknown, you have been warned.
[   41.765558] lib80211_crypt: registered algorithm 'R-CCMP'
[   41.815622] RX: IEEE802.1X EAPOL frame!
[   41.815753] alg name:R-TKIP
[   41.819453] rtllib_crypt_tkip: module is from the staging directory, the quality is unknown, you have been warned.
[   41.819637] lib80211_crypt: registered algorithm 'R-TKIP'
[   42.252184] dm_check_edca_turbo():iot peer is unknown, bssid: 00:02:61:81:98:66
[  539.515358] RX: IEEE802.1X EAPOL frame!
[  539.515708] alg name:R-TKIP


[ct]

Direkt çözüm olmayacak belki ama etrafından dolanmak maksadıyla modemin  enerjisini 45 saniye kadar kesip bağlanmayı deneyebilir misiniz? Şununla da ağ servisleri yeniden başlatılıyor:

Kod Seç Genişlet

sudo /etc/init.d/networking restart

Düzeltme: Yukarıdaki komut her zaman çalışmayabiliyormuş. Şu denenebilir:

Kod Seç Genişlet

sudo ifdown wlan0
sudo ifup wlan0

[if]

Kullanımdaki sürücü

Kod Seç Genişlet

driver=rtl819xE görülüyor.

Kod Seç Genişlet

lsmod | grep "819" çıktısını alayım.

[jeopol]

Direkt çözüm olmayacak belki ama etrafından dolanmak maksadıyla modemin  enerjisini 45 saniye kadar kesip bağlanmayı deneyebilir misiniz? Şununla da ağ servisleri yeniden başlatılıyor:

Kod Seç Genişlet

sudo /etc/init.d/networking restart

Düzeltme: Yukarıdaki komut her zaman çalışmayabiliyormuş. Şu denenebilir:

Kod Seç Genişlet

sudo ifdown wlan0
sudo ifup wlan0

zaten benim sorunum bağlantı kopunca ikici kez aynı bağlantıya bağlanamıyorum.Modem kapatım açmayı çok denemiştim. teşekkürler;)

Kullanımdaki sürücü

Kod Seç Genişlet

driver=rtl819xE görülüyor.

Kod Seç Genişlet

lsmod | grep "819" çıktısını alayım.

Kod Seç Genişlet

r8192e_pci            219124  0
rtllib                155950  1 r8192e_pci
rtl8192se              63284  0
rtlwifi                74705  1 rtl8192se
mac80211              539908  2 rtl8192se,rtlwifi

sonuç olarak bunlar çıktı.

[empax]

Modemin "Kablosuz Ağ Ayarları" bolumunden kanal'i auto degil de 11 yapip dener misin. Belki bir faydasi olabilir.

[if]

Kod Seç Genişlet

r8192e_pci            219124  0
rtllib                155950  1 r8192e_pci
rtl8192se              63284  0
rtlwifi                74705  1 rtl8192se
mac80211              539908  2 rtl8192se,rtlwifi

Debian wikisine göre[1] r8192e_pci ile rtl8192se modülleri aynı kart için kullanılıyormuş. r8192e_pci modülünü kara listeye alalım ve diğeri ile kablosuz bağlanıp bir süre gözlemleyelim durumu.

Kod Seç Genişlet

echo "blacklist r8192e_pci" | sudo tee -a /etc/modprobe.d/blacklist.conf
sudo modprobe -r r8192e_pci
sudo /etc/rc.d/networking restart

[1] http://wiki.debian.org/rtl819x

[jeopol]

Kod Seç Genişlet

r8192e_pci            219124  0
rtllib                155950  1 r8192e_pci
rtl8192se              63284  0
rtlwifi                74705  1 rtl8192se
mac80211              539908  2 rtl8192se,rtlwifi

Debian wikisine göre[1] r8192e_pci ile rtl8192se modülleri aynı kart için kullanılıyormuş. r8192e_pci modülünü kara listeye alalım ve diğeri ile kablosuz bağlanıp bir süre gözlemleyelim durumu.

Kod Seç Genişlet

echo "blacklist r8192e_pci" | sudo tee -a /etc/modprobe.d/blacklist.conf
sudo modprobe -r r8192e_pci
sudo /etc/rc.d/networking restart

[1] http://wiki.debian.org/rtl819x

Dediğiniz gibi yaptım .Fakat önceden gördüğüm  kablosuz ağlar artık görünmüyor ve bağlanamıyorum.


ekleme=

Kod Seç Genişlet

echo "blacklist r8192e_pci" | sudo tee -a /etc/modprobe.d/blacklist.conf
sudo modprobe -r r8192e_pci
sudo /etc/rc.d/networking restart

yukarıdaki kodlar terminalden yazılınca blacklist.conf dosyası şu şekildeydi.

Kod Seç Genişlet

# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
blacklist r8192e_pci
blacklist r8192e_pci
blacklist r8192e_pci

daha sonra kablosuz ağların hiçbiri göremediğimden  blacklist.conf dosyasını aşağıdaki ile değiştirdim.

Kod Seç Genişlet

# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.

# evbug is a debug tool that should be loaded explicitly
blacklist evbug

# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd

# replaced by e100
blacklist eepro100

# replaced by tulip
blacklist de4x5

# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394

# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m

# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2

# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801

# replaced by p54pci
blacklist prism54

# replaced by b43 and ssb.
blacklist bcm43xx

# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps

# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi

# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr



Değiştirdikten sonra ne oldu tam olarak anlayamadım ama sorun çözüldü.Artık bağlantısını kestiğim ağlara ikinci kez bağlanabiliyorum:))

yardımcı olan herkese çok teşekkür ederim.

[if]

Yanlışlıkla da olsa sorunu çözdük galiba:) Bir süre bekleyelim, durum kararlıysa konuyu kilitleyelim.

cozuldukonusu