[Çözüldü] Kablolu İnternet'e Bağlanamıyorum.

[egoist]

Merhaba,

Şimdi işin biraz öncesinden başlıyayım anlatmaya.Bundan 3 sene önce evimize şimşek düştü ve bilgisayarımın ethernet kartını yaktı.Tamire verdiğimde anakart üzerine değilde kasanın alt kısmına bir ethernet girişi koymuşlardı.Gerek windows olsun her formatta ethernet kartımın driver'ını tanıtmadan internet erişimim olmuyordu ubuntuya geçmeyi çok uzun zamandır istiyordum, ama bu internet problemi yüzünden korkuyordum.Dün nolacaksa olsun gibisinden ubuntuyu kurdum.Korktuğum gibi kurulumda internet'i tanımadı.Herneyse dedim kurayım sonra tanıtırım.Uğraştım yok yok yok olmuyor.Siteden çıktıları istemişsiniz sanırım onları doğru yaptığımı bile bilmesemde almaya çalıştım bir tanesi eksikdi sanırım o komutu anlamadı yada olayı ben anlamadım. Herneyse yardımınızı bekliyorum

Ayrıca bilgisayarım desktop masaüstü bilgisayar.Alabildiğim tüm çıktılarda bunlar yardımınızı bekliyorum çünkü hayatım boyunca windows kullanan ben hayran oldum diyebilirim ubuntuya

Kod Seç Genişlet

cat: /etc/lsb/release: No such file or directory


Kod Seç Genişlet

Linux mert 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686 i686 i386 GNU/Linux


Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 0e)
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 0e)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV370 5B60 [Radeon X300 (PCIE)]
01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV370 [Radeon X300SE]
02:00.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
02:06.0 RAID bus controller: VIA Technologies, Inc. VT6410 ATA133 RAID controller (rev 06)


Kod Seç Genişlet


Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser


Kod Seç Genişlet

*-network               
       description: Ethernet interface
       product: IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY
       vendor: Sundance Technology Inc / IC Plus Corp
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: eth0
       version: 31
       serial: 74:ea:3a:82:79:5c
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=sundance driverversion=1.2 duplex=full latency=64 link=yes maxlatency=10 mingnt=10 multicast=yes port=MII speed=100Mbit/s
       resources: irq:20 ioport:9000(size=128) memory:f3000000-f30001ff memory:20000000-2000ffff


Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 74:ea:3a:82:79:5c 
          inet6 addr: fe80::76ea:3aff:fe82:795c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:171 (171.0 B)  TX bytes:4285 (4.2 KB)
          Interrupt:20 Base address:0x9000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:504 errors:0 dropped:0 overruns:0 frame:0
          TX packets:504 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:36368 (36.3 KB)  TX bytes:36368 (36.3 KB)


Kod Seç Genişlet

lo        no wireless extensions.

eth0      no wireless extensions.



Kod Seç Genişlet

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.


Kod Seç Genişlet

Module                  Size  Used by
joydev                 17393  0
hid_logitech           22024  0
ff_memless             12945  1 hid_logitech
rfcomm                 38139  0
bnep                   17830  2
bluetooth             158438  10 rfcomm,bnep
ppdev                  12849  0
snd_intel8x0           33455  2
snd_ac97_codec        106082  1 snd_intel8x0
ac97_bus               12642  1 snd_ac97_codec
snd_pcm                80845  2 snd_intel8x0,snd_ac97_codec
snd_seq_midi           13132  0
snd_rawmidi            25424  1 snd_seq_midi
psmouse                72846  0
snd_seq_midi_event     14475  1 snd_seq_midi
serio_raw              13027  0
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
parport_pc             32114  1
usbhid                 41906  1 hid_logitech
hid                    77367  2 hid_logitech,usbhid
snd_timer              28931  2 snd_pcm,snd_seq
radeon                733693  3
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    62064  11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ttm                    65344  1 radeon
drm_kms_helper         45466  1 radeon
mac_hid                13077  0
drm                   197692  5 radeon,ttm,drm_kms_helper
soundcore              14635  1 snd
snd_page_alloc         14108  2 snd_intel8x0,snd_pcm
i2c_algo_bit           13199  1 radeon
lp                     17455  0
parport                40930  3 ppdev,parport_pc,lp
sundance               26629  0
pata_via               13428  0
floppy                 60310  0



Kod Seç Genişlet

)
[    0.207305] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.207428] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.207540] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.207652] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.207777] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.207906] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.208232] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.208242] vgaarb: loaded
[    0.208245] vgaarb: bridge control possible 0000:01:00.0
[    0.208541] i2c-core: driver [aat2870] using legacy suspend method
[    0.208546] i2c-core: driver [aat2870] using legacy resume method
[    0.208719] SCSI subsystem initialized
[    0.208830] libata version 3.00 loaded.
[    0.208962] usbcore: registered new interface driver usbfs
[    0.208991] usbcore: registered new interface driver hub
[    0.209053] usbcore: registered new device driver usb
[    0.209262] PCI: Using ACPI for IRQ routing
[    0.218224] PCI: pci_cache_line_size set to 64 bytes
[    0.218338] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.218344] reserve RAM buffer: 000000001fff0000 - 000000001fffffff
[    0.218579] NetLabel: Initializing
[    0.218584] NetLabel:  domain hash size = 128
[    0.218587] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.218609] NetLabel:  unlabeled traffic allowed by default
[    0.218805] hpet clockevent registered
[    0.218812] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.218819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.218830] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.224150] Switching to clocksource hpet
[    0.243639] AppArmor: AppArmor Filesystem Enabled
[    0.243701] pnp: PnP ACPI init
[    0.243738] ACPI: bus type pnp registered
[    0.243925] pnp 00:00: [bus 00-ff]
[    0.243931] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.243937] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.243942] pnp 00:00: [io  0x0d00-0xffff window]
[    0.243948] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.243953] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.243963] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[    0.244110] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.244234] pnp 00:01: [io  0x0010-0x001f]
[    0.244241] pnp 00:01: [io  0x0022-0x003f]
[    0.244246] pnp 00:01: [io  0x0044-0x005f]
[    0.244251] pnp 00:01: [io  0x0062-0x0063]
[    0.244256] pnp 00:01: [io  0x0065-0x006f]
[    0.244260] pnp 00:01: [io  0x0074-0x007f]
[    0.244265] pnp 00:01: [io  0x0091-0x0093]
[    0.244270] pnp 00:01: [io  0x00a2-0x00bf]
[    0.244274] pnp 00:01: [io  0x00e0-0x00ef]
[    0.244279] pnp 00:01: [io  0x04d0-0x04d1]
[    0.244283] pnp 00:01: [io  0x0290-0x029f]
[    0.244288] pnp 00:01: [io  0x0800-0x087f]
[    0.244292] pnp 00:01: [io  0x0880-0x088f]
[    0.244411] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.244418] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.244424] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.244430] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.244438] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.244468] pnp 00:02: [dma 4]
[    0.244473] pnp 00:02: [io  0x0000-0x000f]
[    0.244478] pnp 00:02: [io  0x0080-0x0090]
[    0.244483] pnp 00:02: [io  0x0094-0x009f]
[    0.244487] pnp 00:02: [io  0x00c0-0x00df]
[    0.244549] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.244576] pnp 00:03: [io  0x0070-0x0073]
[    0.244596] pnp 00:03: [irq 8]
[    0.244664] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.244685] pnp 00:04: [io  0x0061]
[    0.244752] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.244777] pnp 00:05: [io  0x00f0-0x00ff]
[    0.244788] pnp 00:05: [irq 13]
[    0.244860] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.245107] pnp 00:06: [io  0x03f0-0x03f5]
[    0.245112] pnp 00:06: [io  0x03f7]
[    0.245122] pnp 00:06: [irq 6]
[    0.245126] pnp 00:06: [dma 2]
[    0.245221] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.245563] pnp 00:07: [io  0x03f8-0x03ff]
[    0.245574] pnp 00:07: [irq 4]
[    0.245695] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.246068] pnp 00:08: [io  0x02f8-0x02ff]
[    0.246079] pnp 00:08: [irq 3]
[    0.246210] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.246710] pnp 00:09: [io  0x0378-0x037f]
[    0.246721] pnp 00:09: [irq 7]
[    0.246833] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.247091] pnp 00:0a: [io  0x0400-0x04bf]
[    0.247198] system 00:0a: [io  0x0400-0x04bf] has been reserved
[    0.247206] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.247728] pnp 00:0b: [mem 0xd0000000-0xdfffffff]
[    0.247857] system 00:0b: [mem 0xd0000000-0xdfffffff] has been reserved
[    0.247865] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248906] pnp 00:0c: [mem 0x000d0000-0x000d7fff]
[    0.248912] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[    0.248918] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[    0.248923] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[    0.248928] pnp 00:0c: [mem 0x1fff0000-0x1fffffff]
[    0.248933] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.248938] pnp 00:0c: [mem 0x00100000-0x1ffeffff]
[    0.248944] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.248950] pnp 00:0c: [mem 0xfed13000-0xfed1dfff]
[    0.248956] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[    0.248962] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    0.248967] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
[    0.248972] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[    0.248977] pnp 00:0c: [mem 0x000e0000-0x000effff]
[    0.249118] system 00:0c: [mem 0x000d0000-0x000d7fff] has been reserved
[    0.249125] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.249132] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.249139] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.249145] system 00:0c: [mem 0x1fff0000-0x1fffffff] could not be reserved
[    0.249152] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.249159] system 00:0c: [mem 0x00100000-0x1ffeffff] could not be reserved
[    0.249165] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.249172] system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.249179] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.249185] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.249192] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.249199] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[    0.249205] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[    0.249213] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.249226] pnp: PnP ACPI: found 13 devices
[    0.249230] ACPI: ACPI bus type pnp unregistered
[    0.249238] PnPBIOS: Disabled by ACPI PNP
[    0.288225] PCI: max bus depth: 1 pci_try_num: 2
[    0.288266] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x200fffff pref]
[    0.288276] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
[    0.288284] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.288291] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.288299] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.288306] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff pref]
[    0.288318] pci 0000:02:00.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
[    0.288324] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.288330] pci 0000:00:1e.0:   bridge window [io  0x9000-0xafff]
[    0.288339] pci 0000:00:1e.0:   bridge window [mem 0xf2000000-0xf3ffffff]
[    0.288348] pci 0000:00:1e.0:   bridge window [mem 0x20000000-0x200fffff pref]
[    0.288382] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.288391] pci 0000:00:01.0: setting latency timer to 64
[    0.288405] pci 0000:00:1e.0: setting latency timer to 64
[    0.288413] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.288419] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[    0.288424] pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
[    0.288430] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.288435] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
[    0.288441] pci_bus 0000:02: resource 0 [io  0x9000-0xafff]
[    0.288446] pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf3ffffff]
[    0.288451] pci_bus 0000:02: resource 2 [mem 0x20000000-0x200fffff pref]
[    0.288457] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.288462] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[    0.288539] NET: Registered protocol family 2
[    0.288680] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.289101] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.289191] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.289301] TCP: Hash tables configured (established 16384 bind 16384)
[    0.289309] TCP reno registered
[    0.289316] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.289327] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.289437] NET: Registered protocol family 1
[    0.289478] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.289501] pci 0000:00:1d.0: PCI INT A disabled
[    0.289523] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.289544] pci 0000:00:1d.1: PCI INT B disabled
[    0.289565] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.289587] pci 0000:00:1d.2: PCI INT C disabled
[    0.289600] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.289621] pci 0000:00:1d.3: PCI INT D disabled
[    0.289636] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.289672] pci 0000:00:1d.7: PCI INT A disabled
[    0.289700] pci 0000:01:00.0: Boot video device
[    0.289719] PCI: CLS 32 bytes, default 64
[    0.290333] audit: initializing netlink socket (disabled)
[    0.290350] type=2000 audit(1354403386.284:1): initialized
[    0.327784] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.332091] VFS: Disk quotas dquot_6.5.2
[    0.332234] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.333488] fuse init (API version 7.17)
[    0.333715] msgmni has been set to 962
[    0.334419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.334473] io scheduler noop registered
[    0.334478] io scheduler deadline registered
[    0.334492] io scheduler cfq registered (default)
[    0.334718] pcieport 0000:00:01.0: setting latency timer to 64
[    0.334777] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.334934] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.334990] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.335329] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.335341] ACPI: Power Button [PWRB]
[    0.335465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.335473] ACPI: Power Button [PWRF]
[    0.338485] ERST: Table is not found!
[    0.338490] GHES: HEST is not enabled!
[    0.338649] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.359154] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.359602] isapnp: Scanning for PnP cards...
[    0.480753] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.696912] Freeing initrd memory: 13792k freed
[    0.713021] isapnp: No Plug & Play device found
[    0.788641] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.824460] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.836346] Linux agpgart interface v0.103
[    0.839189] brd: module loaded
[    0.840563] loop: module loaded
[    0.840829] ata_piix 0000:00:1f.2: version 2.13
[    0.840854] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.840862] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.840926] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.841485] scsi0 : ata_piix
[    0.841630] scsi1 : ata_piix
[    0.842458] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.842463] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.843151] Fixed MDIO Bus: probed
[    0.843185] tun: Universal TUN/TAP device driver, 1.6
[    0.843188] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.843325] PPP generic driver version 2.4.2
[    0.843516] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.843544] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.843572] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.843577] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.843662] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.847573] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.847597] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4000000
[    0.860040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.860274] hub 1-0:1.0: USB hub found
[    0.860282] hub 1-0:1.0: 8 ports detected
[    0.860408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.860436] uhci_hcd: USB Universal Host Controller Interface driver
[    0.860460] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.860471] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.860475] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.860554] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.860582] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[    0.860797] hub 2-0:1.0: USB hub found
[    0.860804] hub 2-0:1.0: 2 ports detected
[    0.860905] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.860914] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.860919] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.861005] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.861044] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[    0.861251] hub 3-0:1.0: USB hub found
[    0.861258] hub 3-0:1.0: 2 ports detected
[    0.861361] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.861371] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.861375] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.861459] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.861497] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[    0.861705] hub 4-0:1.0: USB hub found
[    0.861713] hub 4-0:1.0: 2 ports detected
[    0.861813] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.861823] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.861828] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.861909] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.861952] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[    0.862170] hub 5-0:1.0: USB hub found
[    0.862177] hub 5-0:1.0: 2 ports detected
[    0.862351] usbcore: registered new interface driver libusual
[    0.862430] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.865726] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.865737] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.865990] mousedev: PS/2 mouse device common for all mice
[    0.866245] rtc_cmos 00:03: RTC can wake from S4
[    0.866393] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.866423] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.866512] device-mapper: uevent: version 1.0.3
[    0.866640] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.866693] EISA: Probing bus 0 at eisa.0
[    0.866723] Cannot allocate resource for EISA slot 8
[    0.866726] EISA: Detected 0 cards.
[    0.866738] cpufreq-nforce2: No nForce2 chipset.
[    0.866743] cpuidle: using governor ladder
[    0.866746] cpuidle: using governor menu
[    0.866748] EFI Variables Facility v0.08 2004-May-17
[    0.867147] TCP cubic registered
[    0.867336] NET: Registered protocol family 10
[    0.868246] NET: Registered protocol family 17
[    0.868270] Registering the dns_resolver key type
[    0.868300] Using IPI No-Shortcut mode
[    0.868502] PM: Hibernation image not present or could not be loaded.
[    0.868520] registered taskstats version 1
[    0.877462]   Magic number: 8:169:200
[    0.877575] rtc_cmos 00:03: setting system clock to 2012-12-01 23:09:47 UTC (1354403387)
[    0.878554] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.878557] EDD information not available.
[    1.004291] ata1.00: HPA detected: current 156299375, native 156301488
[    1.004300] ata1.00: ATA-7: SAMSUNG HD080HJ, WT100-33, max UDMA7
[    1.004304] ata1.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.012279] ata1.00: configured for UDMA/133
[    1.012478] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ  WT10 PQ: 0 ANSI: 5
[    1.012703] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.012785] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.012838] sd 0:0:0:0: [sda] Write Protect is off
[    1.012846] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.012903] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.020355] ata2.00: ATAPI: SONY    DVD RW DRU-190A, 1.63, max UDMA/66
[    1.038800]  sda: sda1 sda2 < sda5 >
[    1.039413] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.052223] ata2.00: configured for UDMA/66
[    1.054436] scsi 1:0:0:0: CD-ROM            SONY     DVD RW DRU-190A  1.63 PQ: 0 ANSI: 5
[    1.057767] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.057772] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.057950] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.058115] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.058287] Freeing unused kernel memory: 740k freed
[    1.058890] Write protecting the kernel text: 5828k
[    1.058919] Write protecting the kernel read-only data: 2376k
[    1.058922] NX-protecting the kernel data: 4412k
[    1.082854] udevd[88]: starting version 175
[    1.227624] Floppy drive(s): fd0 is 1.44M
[    1.244277] FDC 0 is a post-1991 82077
[    1.258946] pata_via 0000:02:06.0: version 0.3.4
[    1.258991] pata_via 0000:02:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.260507] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker
[    1.260572] scsi2 : pata_via
[    1.260762] scsi3 : pata_via
[    1.260887] ata3: PATA max UDMA/133 cmd 0x9400 ctl 0x9800 bmdma 0xa400 irq 22
[    1.260894] ata4: PATA max UDMA/133 cmd 0x9c00 ctl 0xa000 bmdma 0xa408 irq 22
[    1.261095] sundance 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.262599] eth0: IC Plus Corporation IP100A FAST Ethernet Adapter at 00019000, 74:ea:3a:82:79:5c, IRQ 20.
[    1.263191] eth0: MII PHY found at address 0, status 0x7849 advertising 01e1.
[    1.372040] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    1.471389] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.572277] Refined TSC clocksource calibration: 3014.488 MHz.
[    1.572289] Switching to clocksource tsc
[    9.777416] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.825138] udevd[312]: starting version 175
[    9.872919] Adding 521212k swap on /dev/sda5.  Priority:-1 extents:1 across:521212k
[    9.890187] lp: driver loaded but no devices found
[    9.992294] intel_rng: FWH not detected
[   10.036099] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.047102] [drm] Initialized drm 1.1.0 20060810
[   10.153787] [drm] radeon defaulting to kernel modesetting.
[   10.153796] [drm] radeon kernel modesetting enabled.
[   10.153901] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.153912] radeon 0000:01:00.0: setting latency timer to 64
[   10.186173] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60 0x1FD3:0x1B60).
[   10.186223] [drm] register mmio base: 0xF1000000
[   10.186228] [drm] register mmio size: 65536
[   10.186436] [drm] Generation 2 PCI interface, using max accessible memory
[   10.186448] radeon 0000:01:00.0: VRAM: 256M 0x00000000E0000000 - 0x00000000EFFFFFFF (256M used)
[   10.186455] radeon 0000:01:00.0: GTT: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF
[   10.186474] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.186479] [drm] Driver supports precise vblank timestamp query.
[   10.186541] radeon 0000:01:00.0: irq 41 for MSI/MSI-X
[   10.186552] radeon 0000:01:00.0: radeon: using MSI.
[   10.186590] [drm] radeon: irq initialized.
[   10.194265] [drm] Detected VRAM RAM=256M, BAR=256M
[   10.194273] [drm] RAM width 128bits DDR
[   10.201503] [TTM] Zone  kernel: Available graphics memory: 253728 kiB.
[   10.201510] [TTM] Initializing pool allocator.
[   10.201559] [drm] radeon: 256M of VRAM memory ready
[   10.201564] [drm] radeon: 512M of GTT memory ready.
[   10.201607] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.203478] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[   10.206239] usbcore: registered new interface driver usbhid
[   10.206245] usbhid: USB HID core driver
[   10.206661] [drm] PCIE GART of 512M enabled (table at 0x00000000E0040000).
[   10.233813] parport_pc 00:09: reported by Plug and Play ACPI
[   10.233868] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   10.237334] radeon 0000:01:00.0: WB enabled
[   10.237546] [drm] Loading R300 Microcode
[   10.328360] lp0: using parport0 (interrupt-driven).
[   10.385253] snd_intel8x0 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.385304] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[   10.434514] type=1400 audit(1354396197.054:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=471 comm="apparmor_parser"
[   10.435555] type=1400 audit(1354396197.054:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=471 comm="apparmor_parser"
[   10.436140] type=1400 audit(1354396197.058:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=471 comm="apparmor_parser"
[   10.472187] ppdev: user-space parallel port driver
[   10.491140] init: network-interface (eth0) pre-start process (532) terminated with status 1
[   10.494392] Bluetooth: Core ver 2.16
[   10.496494] NET: Registered protocol family 31
[   10.496502] Bluetooth: HCI device and connection manager initialized
[   10.496508] Bluetooth: HCI socket layer initialized
[   10.496513] Bluetooth: L2CAP socket layer initialized
[   10.496532] Bluetooth: SCO socket layer initialized
[   10.520340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.520348] Bluetooth: BNEP filters: protocol multicast
[   10.543180] Bluetooth: RFCOMM TTY layer initialized
[   10.543194] Bluetooth: RFCOMM socket layer initialized
[   10.543199] Bluetooth: RFCOMM ver 1.11
[   10.549704] type=1400 audit(1354396197.170:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=559 comm="apparmor_parser"
[   10.555731] type=1400 audit(1354396197.174:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=559 comm="apparmor_parser"
[   10.600508] init: network-interface (eth0) post-stop process (551) terminated with status 1
[   10.733401] init: network-interface (lo) pre-start process (569) terminated with status 1
[   10.751760] intel8x0_measure_ac97_clock: measured 74718 usecs (3597 samples)
[   10.751768] intel8x0: clocking to 48000
[   10.759855] init: network-interface (lo) post-stop process (594) terminated with status 1
[   10.928083] [drm] radeon: ring at 0x00000000C0001000
[   10.928107] [drm] ring test succeeded in 0 usecs
[   10.928429] [drm] radeon: ib pool ready.
[   10.928582] [drm] ib test succeeded in 0 usecs
[   10.929760] [drm] Radeon Display Connectors
[   10.929766] [drm] Connector 0:
[   10.929770] [drm]   VGA
[   10.929775] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   10.929779] [drm]   Encoders:
[   10.929783] [drm]     CRT1: INTERNAL_DAC1
[   10.929787] [drm] Connector 1:
[   10.929790] [drm]   DVI-I
[   10.929793] [drm]   HPD1
[   10.929798] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   10.929802] [drm]   Encoders:
[   10.929805] [drm]     CRT2: INTERNAL_DAC2
[   10.929809] [drm]     DFP1: INTERNAL_TMDS1
[   10.929813] [drm] Connector 2:
[   10.929816] [drm]   S-video
[   10.929819] [drm]   Encoders:
[   10.929823] [drm]     TV1: INTERNAL_DAC2
[   10.972869] eth0: Link up
[   10.973215] eth0: Link changed: 100Mbps, full duplex
[   10.974365] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
[   10.976600] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[   11.005665] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[   11.007704] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
[   11.014094] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[   11.066879] [drm] fb mappable at 0xE00C0000
[   11.066884] [drm] vram apper at 0xE0000000
[   11.066887] [drm] size 5185536
[   11.066889] [drm] fb depth is 24
[   11.066892] [drm]    pitch is 5760
[   11.067127] fbcon: radeondrmfb (fb0) is primary device
[   11.067316] Console: switching to colour frame buffer device 180x56
[   11.067382] fb0: radeondrmfb frame buffer device
[   11.067387] drm: registered panic notifier
[   11.067405] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[   11.371938] init: networking main process (668) terminated with status 1
[  130.879755] type=1400 audit(1354396317.498:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=714 comm="apparmor_parser"
[  130.884266] type=1400 audit(1354396317.506:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=713 comm="apparmor_parser"
[  130.886172] type=1400 audit(1354396317.506:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=714 comm="apparmor_parser"
[  130.886708] type=1400 audit(1354396317.506:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=714 comm="apparmor_parser"
[  130.898593] type=1400 audit(1354396317.518:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=717 comm="apparmor_parser"
[  130.899721] type=1400 audit(1354396317.518:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=717 comm="apparmor_parser"
[  130.909880] type=1400 audit(1354396317.530:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=718 comm="apparmor_parser"
[  130.909904] type=1400 audit(1354396317.530:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=715 comm="apparmor_parser"
[  130.911852] type=1400 audit(1354396317.530:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=718 comm="apparmor_parser"
[  130.922395] type=1400 audit(1354396317.542:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=720 comm="apparmor_parser"
[  131.658185] init: plymouth-stop pre-start process (950) terminated with status 1
[  161.538629] audit_printk_skb: 21 callbacks suppressed
[  161.538636] type=1400 audit(1354396348.158:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1539 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

--

Kod Seç Genişlet

[  130.886708] type=1400 audit(1354396317.506:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=714 comm="apparmor_parser"
[  130.898593] type=1400 audit(1354396317.518:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=717 comm="apparmor_parser"
[  130.899721] type=1400 audit(1354396317.518:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=717 comm="apparmor_parser"
[  130.909880] type=1400 audit(1354396317.530:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=718 comm="apparmor_parser"
[  130.909904] type=1400 audit(1354396317.530:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=715 comm="apparmor_parser"
[  130.911852] type=1400 audit(1354396317.530:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=718 comm="apparmor_parser"
[  130.922395] type=1400 audit(1354396317.542:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=720 comm="apparmor_parser"
[  131.658185] init: plymouth-stop pre-start process (950) terminated with status 1
[  161.538629] audit_printk_skb: 21 callbacks suppressed
[  161.538636] type=1400 audit(1354396348.158:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1539 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

[if]

Kart tanınmış, sürücü yüklenmiş ve kullanıda, hatta ağı da görüyor. Araştırmama göre wicd ile bağlantı sağlanmış. Wicd yükleyelim.

Önce öntanımlı gelen ağ yöneticisi Networkmanager paketlerini indirelim ki bir sorun olduğunda tekrar yükleyebilelim:

Kod Seç Genişlet

sudo apt-get install -d --reinstall network-manager network-manager-gnome

Şimdi Wicd yüklenebilir:

Kod Seç Genişlet

sudo apt-get install wicd-gtk

Şimdi Networkmanager'ı kaldıralım:

Kod Seç Genişlet

sudo apt-get remove --purge network-manager-gnome network-manager

Yeniden başlattığınızda ağa bağlanabilirsiniz.

Bir sorun olursa

Kod Seç Genişlet

sudo apt-get install network-manager-gnome network-manager komutu ile Networkmanager'ı kurar

Kod Seç Genişlet

sudo apt-get remove --purge wicd wicd-gtk ile Wicd'i kaldırırsınız.

[egoist]

Dün akşam sinirden bütün sistemi kaldırdım windows'a döndüm.Ama yorumunuza göre işe kesin yoldan bakıyorsunuz.En çabuk fırsatta tekrar ubuntuyu kurmayı deneyeceğim.Bu arada paketleri otomatik internetten mi indiriyor yani internet olmadan o paketleri yükleyebilir değil mi?

[matrax_41]

Network manager ve wicd paketlerini indirmek için internete ihtiyacınız var. Yükleme bölümünde internete ihtiyaç yok. Ubuntu ile hiç internete bağlanamıyorsanız Windows üzerinde wicd ve network manager paketlerini aşağıda vereceğim bağlantıdan indirip Ubuntu'da kurun.

Wicd
http://ubuntuone.com/3ycjb9bqDp6OuYvtV2jKxC

Network Manager
http://ubuntuone.com/6Ht4tqwBGh2fnfcASE5N9f

[egoist]

Dosyaları indirdim, flash belleğime attım.Şimdi masaüstü dizininde nereye çıkartmam gerekiyor ?Winrardan çıkartmam gerekiyor mu?

edit:Pardon winrar değilmiş dosyalar .gz miş.Home dizinine cıkartıyortuz demi

[matrax_41]

Ubuntu'da çıkartabilirsin dosyaları. Önce

Kod Seç Genişlet

sudo apt-get remove --purge network-manager network-manager-gnome  komutu ile network manager'i kaldır. Sonra wicd dosyasından çıkan paketleri

Kod Seç Genişlet

sudo dpkg -i *.deb komutu ile kur.

Nereye çıkarttığının bir önemi yok. Sadece kurulum işleminde dosyaların bulunduğu klasör içinde komut vermen gerekiyor.

[egoist]

Kuruluma başladım, 1-2 saate sizi bilgilendiricem


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Aralık 2012 - 22:01:33
Kurdum sanirim Reset attimm ag baglantisi yok arama yerine wicd yazdim  Wicd Network Mnager e tikladim Avaible from the "universe" source yaziyor .s


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Aralık 2012 - 22:11:09
Acilen yardim bekliyorum internet cok lazim suanda


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Aralık 2012 - 22:14:14


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Aralık 2012 - 22:37:19
Software Sources acdigimda ayni hatanin "main" olanini veriyor

[matrax_41]

network manager'i kaldırdınız mı ? Wicd'in sistemi tekrar başlattığınızda otomatik olarak açılması lazım. Ve

Kod Seç Genişlet

sudo dpkg -i *.deb komutunu indirdiğiniz iki paketi de çıkarttıktan sonra vermeyin. Çünkü bu komut tüm paketleri kurar. Network manager paketlerini şu an için kurmamanız gerekiyor.

[egoist]

Gerçekden hiç birşey anlayamadım baştan anlatabilirmisiniz?

Ben network manager i kaldırdım wicd yükledim sağ üstte internet ile ilgili şeyler gitti.Reset attım ne gelen var ne giden aramaya wicd yazınca wicd network manager çıktı ve unvaible falan işte o hatayı mı veriyor anlayamadım.

Şuan wicd kurulu sanırım onu silip en baştan napmam gerektiğini söylermisiniz


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 04 Aralık 2012 - 10:29:32
Şuanda masaüstümde sadece indirdigim .gz li dosyalar var ayrıca network manager tamamen silinmiş wicd ise silinmemekde E:Packgace falan bişeyler diyor anlayamadım.Sizden ricam anlayabileceğim dilde annlatırmısınız cahillik başa bela

[matrax_41]

Yanlış dosya yüklemişim.

Kod Seç Genişlet

sudo apt-get remove --purge libglade2-0 python-glade2 python-wicd wicd wicd-daemon wicd-gtk network-manager network-manager-gnome ile silin paketleri. Daha sonra aşağıda vereceğim linklerden tekrar paketleri indirip wicd'i kurun.

Wicd
http://ubuntuone.com/0RJGS53fN61Iaq5Obp0ULC

Network Manager
http://ubuntuone.com/4ZnTQAesU1TN5jKQFIurqF

[egoist]

Network gnome falan kaldirdim ama pythonlular bulunamadi diyormtabletteyim tamamini yazamadim *.deb kodunun tamaminida yazsamda kurmuyor gz uzantili dosyalari nereye cikarticam cikarticam mi?

[matrax_41]

Sadece wicd adlı dosyadakileri çıkart ve kur. Kurulumdan sonra sistemi yeniden başlat.

[egoist]

Kurma işlemini verdiginiz kodlarla yapamiyorum malesef baska nasil yapabilirim?

[matrax_41]

Uçbirimde dosyaları çıkarttığınız dizine gidin. Cd dizin_adı şeklinde istediğiniz dizine gidebilirsiniz.

[egoist]

Cd ile home dizinine gidebiliyorum ancak sonrasinda home dizinindeekii wicd klasorune giremiyorum.debli dosyalari masaustune attim sudo dpkg i- *.deb ezberden dogru yazamamis olabilirim bu komutu verdigimde daemonu kuruyor sadeceveya hic kurmuyor

[matrax_41]

Masaüstündeyse dosyalar. cd ~/Masaüstü (ingilizceyse sistem cd ~/Desktop) ile masaüstüne gidebilirsin uçbirimde. Girdikten sonra tekrar

Kod Seç Genişlet

sudo dpkg -i *.deb komutu ile kurmayı dene paketleri.

[egoist]

Masaüstündeyse dosyalar. cd ~/Masaüstü (ingilizceyse sistem cd ~/Desktop) ile masaüstüne gidebilirsin uçbirimde. Girdikten sonra tekrar

Kod Seç Genişlet

sudo dpkg -i *.deb komutu ile kurmayı dene paketleri.

Sistemim yarı türkçe olduğu için ingilizce sanmışım Türkçe kodu algıladı sonunda karşımda google çıktı yani.Herşey içni çok teşekkürler sorunum çözüldü

[if]

@matrax_41'e ben de teşekkür ederim.