Acer Aspire 5920G Bios Açılmama Problemi

[clandestino]

Merhabalar, bilgisayarımda ubuntu ve win7'yi birlikte kullanıyorum. Yaklaşık 5 senelik bir cihaz... Bugün akşam üstü win7de  bilgisayarı açtığımda ekranın tamamını kullanamaz haldeydim. Ekran çözünürlüğü seçeneğine girip algıla diyerek düzeltmeye çalıştım ancak sonuç vermedi ve gri ekran verdi. Pcyi yeniden başlattığımda bios ekranı ve grub ekranını göstermediğini gördüm ancak bekleyip ubuntuya girdiğimde açılış ekranıyla birlikte monitör yeniden çalışmaya başlıyor. El yordamıyla win7ye girdiğimde ise açılıyor(açılış sesini duyuyorum) ancak monitor işlev görmüyor.

Forumda araştırma yaptıktan sonra flashrom ile bios update yaparak sorunu çözmeye çalıştım ancak flashrom anakartımı desteklemiyormuş.

Umarım yardımcı olursunuz.

[if]

@clandestino, donanım sorunu gibi duruyor ve bu noktada biz ne kadar yardımcı olabiliriz bilmiyorum ama

Kod Seç Genişlet

dmesg > dmesg.txt komutunu yürütün, ev dininde oluşan dmesg.txt belgesinin içeriğini imzamdaki "code" bağlantısında anlatıldığı gibi buraya geçin.

[noktafat]

aynı cihaz bendede var, hatta dün formatladım. Ekran kartın zarar görmüş olabilir. Aşırı ısınma sorunu olan bir cihaz ve soğutma sisteminde sorun var. Şöyle ki ekran kartını vidaladığın zaman ekran kartı çipiyle soğutucu arasında boşluk kalıyor, bunu termal ped ile gidermişler. Fakat sanırım termal ped özelliğini yitirebiliyor zamanla, çünkü görüntü sorunlarını yaşadım ve ekran kartım yandı. Yeni kart geldikten sonra, sanayiye gidip motorcudan bakır levhalar aldım ve yuvaya göre 2 kat kestim ikisinide iyice termal macuna buladım kartı takıp vidaladım. 15~20 derece arası bir kazanç sağladı. sadece belli aralıklarla macunu yenilemem gerekiyor

[clandestino]

çıktı sonuçları aşağıdaki gibi

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-29-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 (Ubuntu 3.2.0-29.46-generic-pae 3.2.24)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[    0.000000]  BIOS-e820: 000000007fed0000 - 000000007fee1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fee1000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Acer, inc. Aspire 5920G    /Chapala         , BIOS v1.3813 06/18/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7fed0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 2  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] found SMP MP-table at [c00f7b10] f7b10
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 364ec000 - 3726e000
[    0.000000] ACPI: RSDP 000f7ae0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 7fed38c5 0007C (v01 ACRSYS ACRPRDCT 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 7feddc2a 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 7fed4db5 08E01 (v02 INTEL  CRESTLNE 06040000 MSFT 03000001)
[    0.000000] ACPI: FACS 7fee0fc0 00040
[    0.000000] ACPI: APIC 7feddd1e 00068 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: HPET 7feddd86 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 7fedddbe 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: APIC 7fedddfa 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 7fedde62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 7fedde8a 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000)
[    0.000000] ACPI: SSDT 7fed4ad8 002DD (v01 SataRe SataAhci 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 7fed3efd 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 7fed3e57 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 7fed3941 00516 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1154MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0007fed0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fed0
[    0.000000] On node 0 totalpages: 523871
[    0.000000] free_area_init_node: node 0, pgdat c1866a40, node_mem_map f54ec200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2310 pages used for memmap
[    0.000000]   HighMem zone: 293324 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34240 r0 d23104 u57344
[    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519777
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic-pae root=UUID=5c6fff12-b53c-4b59-97a7-d784dea0beea ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8383488 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007fed0)
[    0.000000] Memory: 2045756k/2095936k available (5814k kernel code, 49728k reserved, 2841k data, 740k init, 1182536k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1875000 - 0xc192e000   ( 740 kB)
[    0.000000]       .data : 0xc15adb64 - 0xc1874240   (2841 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15adb64   (5814 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2000.153 MHz processor.
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.30 BogoMIPS (lpj=8000612)
[    0.004007] pid_max: default: 32768 minimum: 301
[    0.004031] Security Framework initialized
[    0.004050] AppArmor: AppArmor initialized
[    0.004052] Yama: becoming mindful.
[    0.004113] Mount-cache hash table entries: 512
[    0.004261] Initializing cgroup subsys cpuacct
[    0.004268] Initializing cgroup subsys memory
[    0.004276] Initializing cgroup subsys devices
[    0.004279] Initializing cgroup subsys freezer
[    0.004281] Initializing cgroup subsys blkio
[    0.004289] Initializing cgroup subsys perf_event
[    0.004318] CPU: Physical Processor ID: 0
[    0.004320] CPU: Processor Core ID: 0
[    0.004323] mce: CPU supports 6 MCE banks
[    0.004331] CPU0: Thermal monitoring handled by SMI
[    0.004335] using mwait in idle threads.
[    0.009148] ACPI: Core revision 20110623
[    0.016014] ftrace: allocating 26545 entries in 52 pages
[    0.020053] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020511] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061521] CPU0: Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz stepping 0d
[    0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.064003] PEBS disabled due to CPU errata.
[    0.064003] ... version:                2
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      2
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             000000007fffffff
[    0.064003] ... fixed-purpose events:   3
[    0.064003] ... event mask:             0000000700000003
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] CPU 1 irqstacks, hard=f50ea000 soft=f50ec000
[    0.064003] Booting Node   0, Processors  #1 Ok.
[    0.064003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.008000] CPU1: Thermal monitoring handled by SMI
[    0.152039] NMI watchdog enabled, takes one hw-pmu counter.
[    0.152082] Brought up 2 CPUs
[    0.152085] Total of 2 processors activated (8000.59 BogoMIPS).
[    0.153441] devtmpfs: initialized
[    0.153441] EVM: security.selinux
[    0.153441] EVM: security.SMACK64
[    0.153441] EVM: security.capability
[    0.153441] PM: Registering ACPI NVS region at 7fed0000 (69632 bytes)
[    0.153441] print_constraints: dummy:
[    0.153441] RTC time: 18:08:44, date: 11/27/12
[    0.153441] NET: Registered protocol family 16
[    0.153441] Trying to unpack rootfs image as initramfs...
[    0.153441] EISA bus registered
[    0.153451] ACPI: bus type pci registered
[    0.153527] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.153531] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.153533] PCI: Using MMCONFIG for extended config space
[    0.153535] PCI: Using configuration type 1 for base access
[    0.156729] bio: create slab <bio-0> at 0
[    0.156826] ACPI: Added _OSI(Module Device)
[    0.156829] ACPI: Added _OSI(Processor Device)
[    0.156832] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156834] ACPI: Added _OSI(Processor Aggregator Device)
[    0.158847] ACPI: EC: Look up EC in DSDT
[    0.163137] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.164207] ACPI: SSDT 7fed47d8 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.164704] ACPI: Dynamic OEM Table Load:
[    0.164708] ACPI: SSDT   (null) 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.164858] ACPI: SSDT 7fed415c 005F7 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.165333] ACPI: Dynamic OEM Table Load:
[    0.165337] ACPI: SSDT   (null) 005F7 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.165610] ACPI: SSDT 7fed4a10 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.166096] ACPI: Dynamic OEM Table Load:
[    0.166099] ACPI: SSDT   (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.166215] ACPI: SSDT 7fed4753 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.166692] ACPI: Dynamic OEM Table Load:
[    0.166696] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.184844] ACPI: Interpreter enabled
[    0.184844] ACPI: (supports S0 S3 S4 S5)
[    0.184844] ACPI: Using IOAPIC for interrupt routing
[    0.190397] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.190603] ACPI: No dock devices found.
[    0.190606] HEST: Table not found.
[    0.190612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.190996] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.191003] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5024270), AE_NOT_FOUND (20110623/psparse-536)
[    0.191017] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.191744] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.191747] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.191750] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.191754] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.191757] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.191760] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.191762] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.191766] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
[    0.191769] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[    0.191788] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[    0.191854] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[    0.191912] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.191916] pci 0000:00:01.0: PME# disabled
[    0.191979] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[    0.192057] pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
[    0.192106] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[    0.192171] pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
[    0.192238] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[    0.192266] pci 0000:00:1a.7: reg 10: [mem 0xf3504800-0xf3504bff]
[    0.192387] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.192394] pci 0000:00:1a.7: PME# disabled
[    0.192428] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[    0.192453] pci 0000:00:1b.0: reg 10: [mem 0xf3500000-0xf3503fff 64bit]
[    0.192574] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.192580] pci 0000:00:1b.0: PME# disabled
[    0.192614] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[    0.192740] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.192745] pci 0000:00:1c.0: PME# disabled
[    0.192786] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[    0.193491] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.193496] pci 0000:00:1c.3: PME# disabled
[    0.193537] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[    0.193663] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.193669] pci 0000:00:1c.5: PME# disabled
[    0.193703] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[    0.193767] pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
[    0.193817] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[    0.193883] pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
[    0.193932] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[    0.193997] pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
[    0.194060] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[    0.194088] pci 0000:00:1d.7: reg 10: [mem 0xf3504c00-0xf3504fff]
[    0.194211] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.194217] pci 0000:00:1d.7: PME# disabled
[    0.194245] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.194356] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[    0.194483] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.194491] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.194496] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.194501] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 003f)
[    0.194508] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[    0.194572] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[    0.194591] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.194605] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.194619] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.194633] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.194647] pci 0000:00:1f.1: reg 20: [io  0x18a0-0x18af]
[    0.194709] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[    0.194739] pci 0000:00:1f.2: reg 10: [io  0x18d8-0x18df]
[    0.194753] pci 0000:00:1f.2: reg 14: [io  0x18cc-0x18cf]
[    0.194767] pci 0000:00:1f.2: reg 18: [io  0x18d0-0x18d7]
[    0.194781] pci 0000:00:1f.2: reg 1c: [io  0x18c8-0x18cb]
[    0.194795] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
[    0.194809] pci 0000:00:1f.2: reg 24: [mem 0xf3504000-0xf35047ff]
[    0.194886] pci 0000:00:1f.2: PME# supported from D3hot
[    0.194891] pci 0000:00:1f.2: PME# disabled
[    0.194916] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[    0.194936] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[    0.194984] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.195091] pci 0000:01:00.0: [10de:0425] type 0 class 0x000300
[    0.195113] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff]
[    0.195137] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.195161] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit]
[    0.195176] pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
[    0.195192] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.200033] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.200038] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.200042] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf2ffffff]
[    0.200048] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.200119] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.200311] pci 0000:06:00.0: [8086:4222] type 0 class 0x000280
[    0.200371] pci 0000:06:00.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.200810] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.200825] pci 0000:06:00.0: PME# disabled
[    0.200898] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.200939] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[    0.201138] pci 0000:08:00.0: [14e4:1693] type 0 class 0x000200
[    0.201211] pci 0000:08:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
[    0.201651] pci 0000:08:00.0: PME# supported from D3hot D3cold
[    0.201664] pci 0000:08:00.0: PME# disabled
[    0.201821] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[    0.201905] pci 0000:0a:09.0: [1180:0832] type 0 class 0x000c00
[    0.201924] pci 0000:0a:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.201927] pci 0000:0a:09.0: MMC cards are now supported by standard SDHCI controller
[    0.201946] pci 0000:0a:09.0: reg 10: [mem 0xf3200000-0xf32007ff]
[    0.202061] pci 0000:0a:09.0: supports D1 D2
[    0.202064] pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.202069] pci 0000:0a:09.0: PME# disabled
[    0.202093] pci 0000:0a:09.1: [1180:0822] type 0 class 0x000805
[    0.202120] pci 0000:0a:09.1: reg 10: [mem 0xf3200800-0xf32008ff]
[    0.202232] pci 0000:0a:09.1: supports D1 D2
[    0.202235] pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.202240] pci 0000:0a:09.1: PME# disabled
[    0.202266] pci 0000:0a:09.2: [1180:0592] type 0 class 0x000880
[    0.202292] pci 0000:0a:09.2: reg 10: [mem 0xf3201000-0xf32010ff]
[    0.202403] pci 0000:0a:09.2: supports D1 D2
[    0.202406] pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.202411] pci 0000:0a:09.2: PME# disabled
[    0.202436] pci 0000:0a:09.3: [1180:0852] type 0 class 0x000880
[    0.202462] pci 0000:0a:09.3: reg 10: [mem 0xf3201400-0xf32014ff]
[    0.202580] pci 0000:0a:09.3: supports D1 D2
[    0.202583] pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.202589] pci 0000:0a:09.3: PME# disabled
[    0.202654] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[    0.202663] pci 0000:00:1e.0:   bridge window [mem 0xf3200000-0xf32fffff]
[    0.202673] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.202676] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.202679] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.202682] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.202685] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.202688] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.202691] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.202693] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[    0.202696] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.202731] pci_bus 0000:00: on NUMA node 0
[    0.202738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.202994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.203062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.203126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.203183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.203272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.203351] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.203359] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5024270), AE_NOT_FOUND (20110623/psparse-536)
[    0.203372]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.203392] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[    0.203398] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5024270), AE_NOT_FOUND (20110623/psparse-536)
[    0.203410]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.203412] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.210695] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.210758] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.210817] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.210875] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.210933] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.210997] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.211057] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.211117] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.211279] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.211286] vgaarb: loaded
[    0.211289] vgaarb: bridge control possible 0000:01:00.0
[    0.211437] i2c-core: driver [aat2870] using legacy suspend method
[    0.211439] i2c-core: driver [aat2870] using legacy resume method
[    0.211535] SCSI subsystem initialized
[    0.211603] libata version 3.00 loaded.
[    0.211664] usbcore: registered new interface driver usbfs
[    0.211679] usbcore: registered new interface driver hub
[    0.211710] usbcore: registered new device driver usb
[    0.211822] PCI: Using ACPI for IRQ routing
[    0.224171] PCI: pci_cache_line_size set to 64 bytes
[    0.224378] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.224381] reserve RAM buffer: 000000007fed0000 - 000000007fffffff
[    0.224545] NetLabel: Initializing
[    0.224547] NetLabel:  domain hash size = 128
[    0.224549] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.224562] NetLabel:  unlabeled traffic allowed by default
[    0.224633] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.224641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.224647] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.228083] Switching to clocksource hpet
[    0.238227] AppArmor: AppArmor Filesystem Enabled
[    0.238272] pnp: PnP ACPI init
[    0.238296] ACPI: bus type pnp registered
[    0.238706] pnp 00:00: [bus 00-ff]
[    0.238710] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.238713] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.238716] pnp 00:00: [io  0x0d00-0xffff window]
[    0.238718] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.238721] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.238724] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.238726] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.238729] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.238732] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.238734] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.238737] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.238740] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.238743] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.238746] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.238748] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.238751] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.238753] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.238756] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.238759] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.238761] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.238843] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.238941] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.238943] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.238946] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.238948] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.238951] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.238953] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.238956] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.238958] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.239032] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.239036] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.239039] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.239042] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.239046] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.239049] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.239052] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.239055] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.239059] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.239295] pnp 00:02: [io  0x0000-0x001f]
[    0.239298] pnp 00:02: [io  0x0081-0x0091]
[    0.239300] pnp 00:02: [io  0x0093-0x009f]
[    0.239303] pnp 00:02: [io  0x00c0-0x00df]
[    0.239306] pnp 00:02: [dma 4]
[    0.239355] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.239366] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.239415] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.239494] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.239570] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.239575] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.239589] pnp 00:05: [io  0x00f0]
[    0.239608] pnp 00:05: [irq 13]
[    0.239661] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.239676] pnp 00:06: [io  0x002e-0x002f]
[    0.239679] pnp 00:06: [io  0x004e-0x004f]
[    0.239681] pnp 00:06: [io  0x0061]
[    0.239683] pnp 00:06: [io  0x0063]
[    0.239686] pnp 00:06: [io  0x0065]
[    0.239688] pnp 00:06: [io  0x0067]
[    0.239690] pnp 00:06: [io  0x0068-0x006f]
[    0.239692] pnp 00:06: [io  0x0080]
[    0.239694] pnp 00:06: [io  0x0092]
[    0.239699] pnp 00:06: [io  0x00b2-0x00b3]
[    0.239702] pnp 00:06: [io  0x0680-0x069f]
[    0.239704] pnp 00:06: [io  0x0800-0x080f]
[    0.239706] pnp 00:06: [io  0x1000-0x107f]
[    0.239709] pnp 00:06: [io  0x1180-0x11bf]
[    0.239711] pnp 00:06: [io  0x1640-0x164f]
[    0.239713] pnp 00:06: [io  0xfe00]
[    0.239801] system 00:06: [io  0x0680-0x069f] has been reserved
[    0.239804] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.239807] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.239810] system 00:06: [io  0x1180-0x11bf] has been reserved
[    0.239813] system 00:06: [io  0x1640-0x164f] has been reserved
[    0.239816] system 00:06: [io  0xfe00] has been reserved
[    0.239820] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.239831] pnp 00:07: [io  0x0070-0x0077]
[    0.239838] pnp 00:07: [irq 8]
[    0.239888] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.240054] pnp 00:08: [io  0x0600-0x0607]
[    0.240057] pnp 00:08: [io  0x0620-0x063f]
[    0.240063] pnp 00:08: [irq 4]
[    0.240155] pnp 00:08: Plug and Play ACPI device, IDs WEC1020 (active)
[    0.240167] pnp 00:09: [io  0x0060]
[    0.240170] pnp 00:09: [io  0x0064]
[    0.240176] pnp 00:09: [irq 1]
[    0.240228] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.240243] pnp 00:0a: [irq 12]
[    0.240297] pnp 00:0a: Plug and Play ACPI device, IDs SYN1b03 SYN1b00 SYN0002 PNP0f13 (active)
[    0.240354] pnp: PnP ACPI: found 11 devices
[    0.240356] ACPI: ACPI bus type pnp unregistered
[    0.240360] PnPBIOS: Disabled by ACPI PNP
[    0.277126] PCI: max bus depth: 1 pci_try_num: 2
[    0.277217] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80000000-0x800fffff]
[    0.277222] pci 0000:00:1c.5: BAR 14: assigned [mem 0x80100000-0x801fffff]
[    0.277227] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80200000-0x802000ff]
[    0.277234] pci 0000:00:1f.3: BAR 0: set to [mem 0x80200000-0x802000ff] (PCI address [0x80200000-0x802000ff])
[    0.277239] pci 0000:00:1c.5: BAR 14: assigned [mem 0x80300000-0x805fffff]
[    0.277245] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.277250] pci 0000:00:1c.5: BAR 13: assigned [io  0x3000-0x3fff]
[    0.277255] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80800000-0x80afffff]
[    0.277260] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.277264] pci 0000:00:1c.3: BAR 13: assigned [io  0x4000-0x4fff]
[    0.277268] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80b00000-0x80cfffff]
[    0.277273] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80d00000-0x80efffff 64bit pref]
[    0.277278] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.277282] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[    0.277286] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.277289] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.277294] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf2ffffff]
[    0.277298] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.277304] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.277308] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.277315] pci 0000:00:1c.0:   bridge window [mem 0x80b00000-0x80cfffff]
[    0.277321] pci 0000:00:1c.0:   bridge window [mem 0x80d00000-0x80efffff 64bit pref]
[    0.277331] pci 0000:06:00.0: BAR 0: assigned [mem 0x80800000-0x80800fff]
[    0.277345] pci 0000:06:00.0: BAR 0: set to [mem 0x80800000-0x80800fff] (PCI address [0x80800000-0x80800fff])
[    0.277348] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[    0.277352] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.277360] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x80afffff]
[    0.277366] pci 0000:00:1c.3:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.277376] pci 0000:08:00.0: BAR 0: assigned [mem 0x80300000-0x8030ffff 64bit]
[    0.277434] pci 0000:08:00.0: BAR 0: set to [mem 0x80300000-0x8030ffff 64bit] (PCI address [0x80300000-0x8030ffff])
[    0.277437] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[    0.277441] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.277449] pci 0000:00:1c.5:   bridge window [mem 0x80300000-0x805fffff]
[    0.277455] pci 0000:00:1c.5:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.277464] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[    0.277472] pci 0000:00:1e.0:   bridge window [mem 0xf3200000-0xf32fffff]
[    0.277507] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.277512] pci 0000:00:01.0: setting latency timer to 64
[    0.277521] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.277530] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.277538] pci 0000:00:1c.0: setting latency timer to 64
[    0.277546] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[    0.277555] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.277562] pci 0000:00:1c.3: setting latency timer to 64
[    0.277571] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[    0.277575] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.277583] pci 0000:00:1c.5: setting latency timer to 64
[    0.277593] pci 0000:00:1e.0: setting latency timer to 64
[    0.277598] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.277601] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.277604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.277606] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.277609] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.277612] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.277614] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.277617] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff]
[    0.277620] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
[    0.277623] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.277625] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
[    0.277628] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.277631] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.277634] pci_bus 0000:02: resource 1 [mem 0x80b00000-0x80cfffff]
[    0.277637] pci_bus 0000:02: resource 2 [mem 0x80d00000-0x80efffff 64bit pref]
[    0.277639] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.277642] pci_bus 0000:06: resource 1 [mem 0x80800000-0x80afffff]
[    0.277645] pci_bus 0000:06: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.277648] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    0.277650] pci_bus 0000:08: resource 1 [mem 0x80300000-0x805fffff]
[    0.277653] pci_bus 0000:08: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.277656] pci_bus 0000:0a: resource 1 [mem 0xf3200000-0xf32fffff]
[    0.277659] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.277661] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.277664] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.277667] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.277670] pci_bus 0000:0a: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.277672] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.277675] pci_bus 0000:0a: resource 10 [mem 0x000dc000-0x000dffff]
[    0.277678] pci_bus 0000:0a: resource 11 [mem 0x80000000-0xdfffffff]
[    0.277680] pci_bus 0000:0a: resource 12 [mem 0xf0000000-0xfebfffff]
[    0.277734] NET: Registered protocol family 2
[    0.277829] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.278121] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.278624] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.278895] TCP: Hash tables configured (established 131072 bind 65536)
[    0.278897] TCP reno registered
[    0.278901] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.278913] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.279006] NET: Registered protocol family 1
[    0.279045] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.279068] pci 0000:00:1a.0: PCI INT A disabled
[    0.279088] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.279109] pci 0000:00:1a.1: PCI INT B disabled
[    0.279125] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.279167] pci 0000:00:1a.7: PCI INT C disabled
[    0.279194] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.279216] pci 0000:00:1d.0: PCI INT A disabled
[    0.279225] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.279247] pci 0000:00:1d.1: PCI INT B disabled
[    0.279256] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.279278] pci 0000:00:1d.2: PCI INT C disabled
[    0.279289] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.279308] pci 0000:00:1d.7: PCI INT A disabled
[    0.279348] pci 0000:01:00.0: Boot video device
[    0.279412] PCI: CLS 64 bytes, default 64
[    0.279420] Simple Boot Flag at 0x35 set to 0x1
[    0.279828] audit: initializing netlink socket (disabled)
[    0.279839] type=2000 audit(1354039723.272:1): initialized
[    0.308113] highmem bounce pool size: 64 pages
[    0.308120] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.318085] VFS: Disk quotas dquot_6.5.2
[    0.318170] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.318829] fuse init (API version 7.17)
[    0.318943] msgmni has been set to 1685
[    0.319307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.319338] io scheduler noop registered
[    0.319341] io scheduler deadline registered
[    0.319349] io scheduler cfq registered (default)
[    0.319491] pcieport 0000:00:01.0: setting latency timer to 64
[    0.319533] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.319599] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.319662] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.319752] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.319814] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.319905] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.319967] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.320109] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.320139] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.320221] intel_idle: MWAIT substates: 0x22220
[    0.320223] intel_idle: does not run on family 6 model 15
[    0.320644] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.320853] ACPI: AC Adapter [ACAD] (on-line)
[    0.320939] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.320977] ACPI: Lid Switch [LID]
[    0.321030] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.321035] ACPI: Power Button [PWRB]
[    0.321083] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.321087] ACPI: Sleep Button [SLPB]
[    0.321139] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.321143] ACPI: Power Button [PWRF]
[    0.332206] Monitor-Mwait will be used to enter C-1 state
[    0.340122] Monitor-Mwait will be used to enter C-2 state
[    0.340163] Monitor-Mwait will be used to enter C-3 state
[    0.340174] Marking TSC unstable due to TSC halts in idle
[    0.340191] ACPI: acpi_idle registered with cpuidle
[    0.343127] thermal LNXTHERM:00: registered as thermal_zone0
[    0.343131] ACPI: Thermal Zone [THRM] (50 C)
[    0.343163] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.343174] ACPI: Battery Slot [BAT1] (battery absent)
[    0.343205] ERST: Table is not found!
[    0.343207] GHES: HEST is not enabled!
[    0.343312] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.343707] ACPI: Battery Slot [BAT1] (battery absent)
[    0.343735] isapnp: Scanning for PnP cards...
[    0.495891] Freeing initrd memory: 13832k freed
[    0.698276] isapnp: No Plug & Play device found
[    0.756531] Linux agpgart interface v0.103
[    0.758692] brd: module loaded
[    0.759684] loop: module loaded
[    0.759855] ahci 0000:00:1f.2: version 3.0
[    0.759871] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.759934] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    0.760031] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    0.760035] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[    0.760041] ahci 0000:00:1f.2: setting latency timer to 64
[    0.760668] scsi0 : ahci
[    0.760784] scsi1 : ahci
[    0.760885] scsi2 : ahci
[    0.761048] ata1: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504100 irq 44
[    0.761053] ata2: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504180 irq 44
[    0.761057] ata3: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504200 irq 44
[    0.761150] ata_piix 0000:00:1f.1: version 2.13
[    0.761160] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.761202] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.761578] scsi3 : ata_piix
[    0.761670] scsi4 : ata_piix
[    0.762136] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    0.762139] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    0.762607] Fixed MDIO Bus: probed
[    0.762631] tun: Universal TUN/TAP device driver, 1.6
[    0.762634] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.762799] PPP generic driver version 2.4.2
[    0.762938] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.762958] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.762976] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.762980] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.763037] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.763071] ehci_hcd 0000:00:1a.7: debug port 1
[    0.766968] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.766986] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3504800
[    0.780022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.780201] hub 1-0:1.0: USB hub found
[    0.780206] hub 1-0:1.0: 4 ports detected
[    0.780301] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.780316] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.780320] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.780381] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.780413] ehci_hcd 0000:00:1d.7: debug port 1
[    0.784305] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.784322] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3504c00
[    0.800021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.800179] hub 2-0:1.0: USB hub found
[    0.800184] hub 2-0:1.0: 6 ports detected
[    0.800283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.800300] uhci_hcd: USB Universal Host Controller Interface driver
[    0.800320] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.800329] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.800333] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.800391] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.800432] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.800589] hub 3-0:1.0: USB hub found
[    0.800593] hub 3-0:1.0: 2 ports detected
[    0.800683] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.800693] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.800697] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.800750] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.800792] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.800942] hub 4-0:1.0: USB hub found
[    0.800947] hub 4-0:1.0: 2 ports detected
[    0.801032] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.801041] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.801045] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.801100] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.801131] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    0.801287] hub 5-0:1.0: USB hub found
[    0.801291] hub 5-0:1.0: 2 ports detected
[    0.801376] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.801386] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.801390] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.801446] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.801488] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    0.801640] hub 6-0:1.0: USB hub found
[    0.801644] hub 6-0:1.0: 2 ports detected
[    0.801729] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.801738] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.801742] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.801797] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.801826] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    0.801986] hub 7-0:1.0: USB hub found
[    0.801991] hub 7-0:1.0: 2 ports detected
[    0.802136] usbcore: registered new interface driver libusual
[    0.802194] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.804897] i8042: Detected active multiplexing controller, rev 1.1
[    0.805864] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.805871] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.805906] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.805939] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.805972] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.806135] mousedev: PS/2 mouse device common for all mice
[    0.806416] rtc_cmos 00:07: RTC can wake from S4
[    0.806563] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.806598] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.806665] device-mapper: uevent: version 1.0.3
[    0.806765] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.806804] EISA: Probing bus 0 at eisa.0
[    0.806807] EISA: Cannot allocate resource for mainboard
[    0.806810] Cannot allocate resource for EISA slot 1
[    0.806812] Cannot allocate resource for EISA slot 2
[    0.806814] Cannot allocate resource for EISA slot 3
[    0.806816] Cannot allocate resource for EISA slot 4
[    0.806819] Cannot allocate resource for EISA slot 5
[    0.806821] Cannot allocate resource for EISA slot 6
[    0.806823] Cannot allocate resource for EISA slot 7
[    0.806825] Cannot allocate resource for EISA slot 8
[    0.806827] EISA: Detected 0 cards.
[    0.806839] cpufreq-nforce2: No nForce2 chipset.
[    0.806912] cpuidle: using governor ladder
[    0.807031] cpuidle: using governor menu
[    0.807034] EFI Variables Facility v0.08 2004-May-17
[    0.807350] TCP cubic registered
[    0.807493] NET: Registered protocol family 10
[    0.808193] NET: Registered protocol family 17
[    0.808201] Registering the dns_resolver key type
[    0.808227] Using IPI No-Shortcut mode
[    0.808413] PM: Hibernation image not present or could not be loaded.
[    0.808429] registered taskstats version 1
[    0.820406]   Magic number: 4:36:141
[    0.820433] block ram6: hash matches
[    0.820470] acpi device:12: hash matches
[    0.820532] rtc_cmos 00:07: setting system clock to 2012-11-27 18:08:44 UTC (1354039724)
[    0.821076] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.821079] EDD information not available.
[    0.836345] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.927967] ata4.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33
[    0.944445] ata4.00: configured for UDMA/33
[    1.080192] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.080224] ata2: SATA link down (SStatus 0 SControl 300)
[    1.080261] ata3: SATA link down (SStatus 0 SControl 300)
[    1.081183] ata1.00: unexpected _GTF length (8)
[    1.081587] ata1.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133
[    1.081594] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.082767] ata1.00: unexpected _GTF length (8)
[    1.083176] ata1.00: configured for UDMA/133
[    1.083425] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
[    1.083582] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.083602] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.083637] sd 0:0:0:0: [sda] Write Protect is off
[    1.083640] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.083664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.091128] scsi 3:0:0:0: CD-ROM            _NEC     DVD+-RW ND-6650A 1.42 PQ: 0 ANSI: 5
[    1.092092] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    1.102593] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.102599] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.102823] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.102947] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.129446]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[    1.130326] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.130449] Freeing unused kernel memory: 740k freed
[    1.130806] Write protecting the kernel text: 5816k
[    1.130836] Write protecting the kernel read-only data: 2376k
[    1.130838] NX-protecting the kernel data: 4424k
[    1.150225] udevd[100]: starting version 175
[    1.241649] tg3.c:v3.121 (November 2, 2011)
[    1.241708] tg3 0000:08:00.0: enabling device (0000 -> 0002)
[    1.241721] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.242305] tg3 0000:08:00.0: setting latency timer to 64
[    1.249105] firewire_ohci 0000:0a:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.253853] sdhci: Secure Digital Host Controller Interface driver
[    1.253856] sdhci: Copyright(c) Pierre Ossman
[    1.288409] tg3 0000:08:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1e:68:1f:20:40
[    1.288415] tg3 0000:08:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    1.288419] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.288422] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.340113] firewire_ohci: Added fw-ohci device 0000:0a:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[    1.340221] sdhci-pci 0000:0a:09.1: SDHCI controller found [1180:0822] (rev 22)
[    1.340252] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.341278] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.341304] mmc0: no vmmc regulator found
[    1.342333] Registered led device: mmc0::
[    1.344366] mmc0: SDHCI controller on PCI [0000:0a:09.1] using DMA
[    1.632049] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    1.822949] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input5
[    1.823128] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[    1.828317] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input6
[    1.828595] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[    1.828613] usbcore: registered new interface driver usbhid
[    1.828615] usbhid: USB HID core driver
[    1.838680] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    1.840142] firewire_core: created device fw0: GUID 00241b005f4abc00, S400
[   14.924464] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.947814] udevd[334]: starting version 175
[   14.989137] lp: driver loaded but no devices found
[   14.997674] Adding 1951740k swap on /dev/sda6.  Priority:-1 extents:1 across:1951740k
[   15.104128] cfg80211: Calling CRDA to update world regulatory domain
[   15.151350] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   15.151354] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   15.151442] iwl3945 0000:06:00.0: enabling device (0000 -> 0002)
[   15.151456] iwl3945 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   15.151478] iwl3945 0000:06:00.0: setting latency timer to 64
[   15.153020] nvidia: module license 'NVIDIA' taints kernel.
[   15.153025] Disabling lock debugging due to kernel taint
[   15.207932] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   15.207937] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   15.208134] iwl3945 0000:06:00.0: irq 45 for MSI/MSI-X
[   15.208299] Registered led device: phy0-led
[   15.208334] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   15.211233] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   15.226746] wmi: Mapper loaded
[   15.227381] Linux video capture interface: v2.00
[   15.230253] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
[   15.288484] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
[   15.288625] usbcore: registered new interface driver uvcvideo
[   15.288627] USB Video Class driver (1.1.1)
[   15.375406] acpi device:03: registered as cooling_device2
[   15.375835] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8
[   15.375921] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   15.396595] r852 0000:0a:09.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   15.400051] r852: driver loaded successfully
[   15.400140] r592 0000:0a:09.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   15.402589] r592: driver successfully loaded
[   15.624127] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   15.626596] type=1400 audit(1354032539.300:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=601 comm="apparmor_parser"
[   15.627089] type=1400 audit(1354032539.300:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=601 comm="apparmor_parser"
[   15.627370] type=1400 audit(1354032539.300:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=601 comm="apparmor_parser"
[   15.728352] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.728364] nvidia 0000:01:00.0: setting latency timer to 64
[   15.728370] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   15.761428] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.35  Thu May 31 12:00:16 PDT 2012
[   15.794395] acer_wmi: Acer Laptop ACPI-WMI Extras
[   15.794878] acer_wmi: Function bitmap for Communication Device: 0x7
[   15.794882] acer_wmi: Brightness must be controlled by generic video driver
[   15.804179] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.804256] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   15.804295] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   15.820574] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   15.820578] cfg80211: World regulatory domain updated:
[   15.820580] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.820584] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.820587] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.820590] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.820593] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.820596] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.180113] psmouse serio3: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f/0x10000
[   16.183107] init: failsafe main process (772) killed by TERM signal
[   16.217578] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input9
[   16.380288] Bluetooth: Core ver 2.16
[   16.380327] NET: Registered protocol family 31
[   16.380329] Bluetooth: HCI device and connection manager initialized
[   16.380333] Bluetooth: HCI socket layer initialized
[   16.380335] Bluetooth: L2CAP socket layer initialized
[   16.380347] Bluetooth: SCO socket layer initialized
[   16.388752] ppdev: user-space parallel port driver
[   16.404129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.404133] Bluetooth: BNEP filters: protocol multicast
[   16.423226] Bluetooth: RFCOMM TTY layer initialized
[   16.423232] Bluetooth: RFCOMM socket layer initialized
[   16.423234] Bluetooth: RFCOMM ver 1.11
[   16.451624] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   16.451627] vesafb: scrolling: redraw
[   16.451631] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   16.454577] vesafb: framebuffer at 0xf1000000, mapped to 0xf8980000, using 1216k, total 1216k
[   16.454759] Console: switching to colour frame buffer device 80x30
[   16.454774] fb0: VESA VGA frame buffer device
[   16.475292] type=1400 audit(1354032540.148:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=884 comm="apparmor_parser"
[   16.475964] type=1400 audit(1354032540.148:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=884 comm="apparmor_parser"
[   16.486535] type=1400 audit(1354032540.160:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=882 comm="apparmor_parser"
[   16.500319] type=1400 audit(1354032540.176:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=883 comm="apparmor_parser"
[   16.500844] type=1400 audit(1354032540.176:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=883 comm="apparmor_parser"
[   16.501130] type=1400 audit(1354032540.176:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=883 comm="apparmor_parser"
[   16.511565] type=1400 audit(1354032540.184:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=893 comm="apparmor_parser"
[   16.594188] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[   16.669994] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.670276] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.675217] tg3 0000:08:00.0: irq 47 for MSI/MSI-X
[   16.864539] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.865302] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.026827] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000/0x0
[   17.062730] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[   18.705310] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[   25.355455] wlan0: authenticate with 00:1c:a8:69:ca:4c (try 1)
[   25.356971] wlan0: authenticated
[   25.361760] wlan0: associate with 00:1c:a8:69:ca:4c (try 1)
[   25.365735] wlan0: RX AssocResp from 00:1c:a8:69:ca:4c (capab=0x451 status=0 aid=3)
[   25.365739] wlan0: associated
[   25.368772] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   35.552046] wlan0: no IPv6 routers present[quote author=if link=topic=36883.msg443441#msg443441 date=1353968919]

[burk]

Açılışta BIOS ve Grub ekranı çıkmıyor ve ekran sadece Ubuntu'da görüntü veriyor, sorun net olarak bu mu?

[clandestino]

Açılışta BIOS ve Grub ekranı çıkmıyor ve ekran sadece Ubuntu'da görüntü veriyor, sorun net olarak bu mu?

problem bu evet.

[burk]

Grub kurulumu için şu başlığı takip edin; http://forum.ubuntu-tr.net/index.php?topic=13415.0
Bu arada grub çıkmıyorsa Windows'u nasıl açıyorsunuz? Grub ekranı yokken aşağı-yukarı tuşları iş görüyorsa başlığı uygulamayın.

[if]

acpi_apic_instance=2 parametresini kullanarak başlatın.

[clandestino]

acpi_apic_instance=2 parametresini kullanarak başlatın.

nasıl başlatacağım konusunda bilgi verebilir misiniz?

[if]

http://forum.ubuntu-tr.net/index.php?topic=31554.0