[Çözüldü] Update Manager hatası

[franchumoriste]

Merhaba acil bir yardıma ihtiyacım var.

ben startup application'dan update manager'ı iptal etmiştim, yani manüel güncelleme yapıyordum. dün uzun zamandır yapmadığımdan sudo update-manager komutuyla güncellemeleri almaya başladım. yalnız sonuna geldiğinde takıldı bir saat kaldı ve ben iptal etmek zorunda kaldım. bilgisayar o andan sonra düzgün çalışmamaya başladı. yarım kalmıştır diye update-manager'ı tekrar başlattım, package error verdi önce, sonra tekrar başlattım, daemonlarla ilgili bir error verdi. bugün de internetten *.doc dosyalarını bile indiremiyorum download error veriyor ve openOffice'i bile açamıyorum(yeşil ekran çıkıyor, kayboluyor, o kadar)

reboot esnasında hata bulduğunu söyledi, F tuşu ile düzeltmesini istedim /tmp dizinini bulamıyormuş, gibi bir error verdi ama bilgisayar baştan başladı. tekrar reboot yaptım, masaüstüne geldim, update-manager'ı tekrar çalıştırdım, screenshot alıp buraya yazmak istiyordum ama onu da kaydetmeyi reddetti!

allahtan chrome ve firefox açılıyor(ve terminal tabi ki).

bana yardımcı olabilirseniz sevinirim (işteyim)

iyi günler

---------
Ubuntu 12.10 64 bit'teyim

[if]

@franchumoriste, sizden öncelikli ricam İngilizce yazdığınız kelimeler yerine Türkçe karşılıklarını kullanmanız.

Kod Seç Genişlet

sudo apt-get install -f
sudo dpkg-reconfigure -a komutları ne çıktı veriyor?

[franchumoriste]

1) tamam özür dilerim bende ingilizce olduğundan kolayıma geldi.

2)

Kod Seç Genişlet


bugra@bugrapc:~$ sudo apt-get install -f
[sudo] password for bugra:
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
bugra@bugrapc:~$ sudo dpkg-reconfigure -a
bugra@bugrapc:~$


openOffice hala açılmıyor, dosya kaydetmede de sorunum var.

[if]

Kod Seç Genişlet

dpkg -l | grep -v ^ii çıktısını görebilir miyim?

[franchumoriste]

Kod Seç Genişlet


bugra@bugrapc:~$ dpkg -l | grep -v ^ii
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                                      Version                                   Architecture Description
+++-=========================================-=========================================-============-==============================================================================
iHR thunderbird                               16.0.2+build1-0ubuntu0.12.10.1            amd64        Email, RSS and newsgroup client with integrated spam filter
iU  thunderbird-globalmenu                    17.0+build2-0ubuntu0.12.10.1              amd64        Unity appmenu integration for Thunderbird
iU  thunderbird-gnome-support                 17.0+build2-0ubuntu0.12.10.1              amd64        Email, RSS and newsgroup client - GNOME support
iU  thunderbird-locale-en                     1:17.0+build2-0ubuntu0.12.10.1            amd64        English language pack for Thunderbird
iU  thunderbird-locale-en-us                  1:17.0+build2-0ubuntu0.12.10.1            all          Transitional English language pack for Thunderbird


[if]

Kod Seç Genişlet

sudo dpkg-reconfigure -a komutunu yürütünüz, çıktısını da alayım. Ardından tekrar

Kod Seç Genişlet

dpkg -l | grep -v ^ii çıktısına bakayım.

[franchumoriste]

Kod Seç Genişlet


bugra@bugrapc:~$ sudo dpkg-reconfigure -a
sudo: unable to open /var/lib/sudo/bugra/1: Read-only file system
bugra@bugrapc:~$ dpkg -l | grep -v ^ii
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                                      Version                                   Architecture Description
+++-=========================================-=========================================-============-==============================================================================
iHR thunderbird                               16.0.2+build1-0ubuntu0.12.10.1            amd64        Email, RSS and newsgroup client with integrated spam filter
iU  thunderbird-globalmenu                    17.0+build2-0ubuntu0.12.10.1              amd64        Unity appmenu integration for Thunderbird
iU  thunderbird-gnome-support                 17.0+build2-0ubuntu0.12.10.1              amd64        Email, RSS and newsgroup client - GNOME support
iU  thunderbird-locale-en                     1:17.0+build2-0ubuntu0.12.10.1            amd64        English language pack for Thunderbird
iU  thunderbird-locale-en-us                  1:17.0+build2-0ubuntu0.12.10.1            all          Transitional English language pack for Thunderbird
bugra@bugrapc:~$


ilk komutun çıktısı bayağı bekletiyor

[if]

@franchmoriste, şu an canlı cd/usb üzerinde misiniz?

[franchumoriste]

hayır.

bilgisayarıma bağlı yalnız kablolu internet var

[if]

@franchmoriste,

Kod Seç Genişlet

mount
df -h çıktılarını alayım.

[franchumoriste]

Kod Seç Genişlet


bugra@bugrapc:~$ mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/bugra/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=bugra)
bugra@bugrapc:~$ df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/sda1       109G   16G   88G  16% /
udev            993M  4.0K  993M   1% /dev
tmpfs           401M  812K  400M   1% /run
none            5.0M     0  5.0M   0% /run/lock
none           1002M  1.2M 1000M   1% /run/shm
none            100M   24K  100M   1% /run/user


[if]

Kod Seç Genişlet

sudo apt-get remove --purge thunderbird* komutunu yürütün.

Kod Seç Genişlet

dpkg -l | grep -v ^ii çıktısını buraya geçin. Kalkmışsa aşağıdaki komutları yürütecceğiz.

Sonra

Kod Seç Genişlet

sudo apt-get clean
sudo apt-get autoclean
sudo apt-get autoremove
sudo apt-get update
sudo apt-get upgrade


[franchumoriste]

ilk komutu denedim hata verdi.

Kod Seç Genişlet


sudo dpkg --configure -a


komutuyla denememi sitedi. yaptım tekrar ilk komutu girdim bu sefer çalıştı, thunderbird'ü kaldırdı. aşağıda ikinci komutun çıktısı:

Kod Seç Genişlet


bugra@bugrapc:~$ dpkg -l | grep -v ^ii
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                                      Version                                   Architecture Description
+++-=========================================-=========================================-============-==============================================================================
pHR thunderbird                               16.0.2+build1-0ubuntu0.12.10.1            amd64        Email, RSS and newsgroup client with integrated spam filter



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 23 Kasım 2012 - 16:41:57
kaldırdıktan sonra yazdığınız yüklemeleri de yaptım. update-manager sorunsuz çalışıyor. dosya yükleme hatası da kesildi. yalnız hala openOffice uygulamasını açamıyorum.

(girdiğim son kodu sildim doğru olduğundan şüpheliyim ama arayüzden de aynı sonucu alıyorum)

[if]

@franchmoriste,

Kod Seç Genişlet

lowriter okmutunu yürütünüz. Bakalım LibreOffice neden çalışmıyormuş.

[franchumoriste]

Kod Seç Genişlet


bugra@bugrapc:~$ lowriter
Bus error (core dumped)



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 23 Kasım 2012 - 18:19:41
ya bilgisayarım şimdi de usbleri görmüyor. read-only file system yazıp hata veriyor

[if]

@franchumorise, bir hata kaydı açılmış. Blgisayarı yeniden başatın ve

Kod Seç Genişlet

dmesg > dmesg.txt komutunu yürütüp dmesg.txt içeriğini buraya geçin.

https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1039520

[franchumoriste]

evet launchpad'de de benzer vakalar belirtilmiş. yalnız olmadığımı bilmek güzel.

aşağıda dmesg.txt içeriğini yolluyorum

Kod Seç Genişlet


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-18-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 (Ubuntu 3.5.0-18.29-generic 3.5.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=4f38be0e-c0c7-4e42-b58e-059da8d57bbd ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fecffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fed0000-0x000000007fee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Sony Corporation VGN-FZ11M/VAIO, BIOS R0050J7 04/18/2007
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x7fed0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 2  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000f8010-0x000f801f] mapped at [ffff8800000f8010]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x7fecffff]
[    0.000000]  [mem 0x00000000-0x7fdfffff] page 2M
[    0.000000]  [mem 0x7fe00000-0x7fecffff] page 4k
[    0.000000] kernel direct mapping tables up to 0x7fecffff @ [mem 0x1fffc000-0x1fffffff]
[    0.000000] RAMDISK: [mem 0x362e2000-0x37168fff]
[    0.000000] ACPI: RSDP 00000000000f7fe0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 000000007fedab83 0008C (v01   Sony     VAIO 20070418 PTL  00000000)
[    0.000000] ACPI: FACP 000000007fee1bd2 000F4 (v03   Sony     VAIO 20070418 PTL  00000001)
[    0.000000] ACPI: DSDT 000000007fedbeeb 05C73 (v02   Sony     VAIO 20070418 PTL  20050624)
[    0.000000] ACPI: FACS 000000007fee2fc0 00040
[    0.000000] ACPI: APIC 000000007fee1cc6 00068 (v01   Sony     VAIO 20070418 PTL  0000005A)
[    0.000000] ACPI: HPET 000000007fee1d2e 00038 (v01   Sony     VAIO 20070418 PTL  0000005A)
[    0.000000] ACPI: MCFG 000000007fee1d66 0003C (v01   Sony     VAIO 20070418 PTL  0000005A)
[    0.000000] ACPI: TCPA 000000007fee1da2 00032 (v01   Sony     VAIO 20070418 PTL  00005A52)
[    0.000000] ACPI: SLIC 000000007fee1dd4 00176 (v01   Sony     VAIO 20070418 PTL  01000000)
[    0.000000] ACPI: TMOR 000000007fee1f4a 00026 (v01   Sony     VAIO 20070418 PTL  00000003)
[    0.000000] ACPI: APIC 000000007fee1f70 00068 (v01   Sony     VAIO 20070418 PTL  00000000)
[    0.000000] ACPI: BOOT 000000007fee1fd8 00028 (v01   Sony     VAIO 20070418 PTL  00000001)
[    0.000000] ACPI: SSDT 000000007fedbc29 002C2 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.000000] ACPI: SSDT 000000007fedb19b 0025F (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.000000] ACPI: SSDT 000000007fedb0f5 000A6 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.000000] ACPI: SSDT 000000007fedac0f 004E6 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fecffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7fecffff]
[    0.000000]   NODE_DATA [mem 0x7fecc000-0x7fecffff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7fecffff]
[    0.000000] On node 0 totalpages: 523871
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8124 pages used for memmap
[    0.000000]   DMA32 zone: 511764 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83584 r8192 d22912 u1048576
[    0.000000] pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515677
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=4f38be0e-c0c7-4e42-b58e-059da8d57bbd ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2031768k/2095936k available (6717k kernel code, 452k absent, 63716k reserved, 6453k data, 928k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1795.424 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.84 BogoMIPS (lpj=7181696)
[    0.004009] pid_max: default: 32768 minimum: 301
[    0.004040] Security Framework initialized
[    0.004060] AppArmor: AppArmor initialized
[    0.004062] Yama: becoming mindful.
[    0.004308] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008972] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.009486] Mount-cache hash table entries: 256
[    0.009748] Initializing cgroup subsys cpuacct
[    0.009752] Initializing cgroup subsys memory
[    0.009763] Initializing cgroup subsys devices
[    0.009765] Initializing cgroup subsys freezer
[    0.009767] Initializing cgroup subsys blkio
[    0.009769] Initializing cgroup subsys perf_event
[    0.009805] CPU: Physical Processor ID: 0
[    0.009807] CPU: Processor Core ID: 0
[    0.009809] mce: CPU supports 6 MCE banks
[    0.009818] CPU0: Thermal monitoring enabled (TM2)
[    0.009823] using mwait in idle threads.
[    0.013329] ACPI: Core revision 20120320
[    0.020031] ftrace: allocating 25135 entries in 99 pages
[    0.028518] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070938] CPU0: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
[    0.072003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.072003] PEBS disabled due to CPU errata.
[    0.072003] ... version:                2
[    0.072003] ... bit width:              40
[    0.072003] ... generic registers:      2
[    0.072003] ... value mask:             000000ffffffffff
[    0.072003] ... max period:             000000007fffffff
[    0.072003] ... fixed-purpose events:   3
[    0.072003] ... event mask:             0000000700000003
[    0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072003] Booting Node   0, Processors  #1 Ok.
[    0.080087] Brought up 2 CPUs
[    0.080092] Total of 2 processors activated (7181.69 BogoMIPS).
[    0.081461] devtmpfs: initialized
[    0.081461] EVM: security.selinux
[    0.081461] EVM: security.SMACK64
[    0.081461] EVM: security.capability
[    0.084029] PM: Registering ACPI NVS region [mem 0x7fed0000-0x7fee2fff] (77824 bytes)
[    0.084950] dummy:
[    0.084992] RTC time: 16:24:24, date: 11/23/12
[    0.085036] NET: Registered protocol family 16
[    0.085049] Trying to unpack rootfs image as initramfs...
[    0.085247] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.085251] ACPI: bus type pci registered
[    0.085320] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.085323] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.107698] PCI: Using configuration type 1 for base access
[    0.109098] bio: create slab <bio-0> at 0
[    0.109239] ACPI: Added _OSI(Module Device)
[    0.109242] ACPI: Added _OSI(Processor Device)
[    0.109244] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.109247] ACPI: Added _OSI(Processor Aggregator Device)
[    0.110744] ACPI: EC: Look up EC in DSDT
[    0.113248] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.114409] ACPI: SSDT 000000007fedb929 00238 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.114779] ACPI: Dynamic OEM Table Load:
[    0.114783] ACPI: SSDT           (null) 00238 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.114906] ACPI: SSDT 000000007fedb3fa 004AA (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.115255] ACPI: Dynamic OEM Table Load:
[    0.115259] ACPI: SSDT           (null) 004AA (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.115491] ACPI: SSDT 000000007fedbb61 000C8 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.115851] ACPI: Dynamic OEM Table Load:
[    0.115855] ACPI: SSDT           (null) 000C8 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.115944] ACPI: SSDT 000000007fedb8a4 00085 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.116303] ACPI: Dynamic OEM Table Load:
[    0.116307] ACPI: SSDT           (null) 00085 (v01   Sony     VAIO 20070418 PTL  20050624)
[    0.316147] ACPI: Interpreter enabled
[    0.316158] ACPI: (supports S0 S3 S4 S5)
[    0.316185] ACPI: Using IOAPIC for interrupt routing
[    0.332552] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.338239] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.338423] ACPI: No dock devices found.
[    0.338429] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.338878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.339516] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.339520] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.339523] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.339527] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.339530] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.339533] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.339537] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[    0.339540] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[    0.339543] PCI: root bus 00: using default resources
[    0.339583] PCI host bridge to bus 0000:00
[    0.339587] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.339590] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.339606] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.339665] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[    0.339719] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.339782] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.339846] pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
[    0.339894] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.339956] pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
[    0.340035] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.340063] pci 0000:00:1a.7: reg 10: [mem 0xfc404800-0xfc404bff]
[    0.340181] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.340220] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.340245] pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit]
[    0.340362] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.340399] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.340521] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.340560] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.340680] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.340726] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[    0.340848] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.340890] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.341012] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.341051] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.341115] pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
[    0.341163] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.341225] pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
[    0.341273] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.341337] pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
[    0.341399] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.341426] pci 0000:00:1d.7: reg 10: [mem 0xfc404c00-0xfc404fff]
[    0.341544] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.341575] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.341684] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.341809] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.341816] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.341888] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.341908] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.341921] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.341935] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.341949] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.341963] pci 0000:00:1f.1: reg 20: [io  0x18a0-0x18af]
[    0.342024] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.342053] pci 0000:00:1f.2: reg 10: [io  0x18d8-0x18df]
[    0.342067] pci 0000:00:1f.2: reg 14: [io  0x18cc-0x18cf]
[    0.342080] pci 0000:00:1f.2: reg 18: [io  0x18d0-0x18d7]
[    0.342094] pci 0000:00:1f.2: reg 1c: [io  0x18c8-0x18cb]
[    0.342108] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
[    0.342121] pci 0000:00:1f.2: reg 24: [mem 0xfc404000-0xfc4047ff]
[    0.342195] pci 0000:00:1f.2: PME# supported from D3hot
[    0.342224] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.342243] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[    0.342289] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.342395] pci 0000:01:00.0: [10de:0426] type 00 class 0x030000
[    0.342420] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[    0.342446] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.342472] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
[    0.342490] pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
[    0.342506] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.342619] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.342623] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.342627] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.342633] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.342700] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.342706] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.342712] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.342721] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.342790] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.342796] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.342802] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.342811] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.342986] pci 0000:06:00.0: [8086:4222] type 00 class 0x028000
[    0.343045] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa000fff]
[    0.343479] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.348107] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[    0.348114] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.348120] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.348129] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.348231] pci 0000:08:00.0: [11ab:4351] type 00 class 0x020000
[    0.348266] pci 0000:08:00.0: reg 10: [mem 0xfc000000-0xfc003fff 64bit]
[    0.348285] pci 0000:08:00.0: reg 18: [io  0x6000-0x60ff]
[    0.348452] pci 0000:08:00.0: supports D1 D2
[    0.348455] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.356044] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[    0.356051] pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
[    0.356057] pci 0000:00:1c.4:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.356126] pci 0000:09:03.0: [104c:8039] type 02 class 0x060700
[    0.356155] pci 0000:09:03.0: reg 10: [mem 0xfc100000-0xfc100fff]
[    0.356204] pci 0000:09:03.0: supports D1 D2
[    0.356207] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.356239] pci 0000:09:03.1: [104c:803a] type 00 class 0x0c0010
[    0.356267] pci 0000:09:03.1: reg 10: [mem 0xfc102000-0xfc1027ff]
[    0.356284] pci 0000:09:03.1: reg 14: [mem 0xfc104000-0xfc107fff]
[    0.356400] pci 0000:09:03.1: supports D1 D2
[    0.356402] pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.356438] pci 0000:09:03.2: [104c:803b] type 00 class 0x018000
[    0.356467] pci 0000:09:03.2: reg 10: [mem 0xfc101000-0xfc101fff]
[    0.356589] pci 0000:09:03.2: supports D1 D2
[    0.356592] pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
[    0.356673] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode)
[    0.356682] pci 0000:00:1e.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.356692] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.356695] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.356752] pci_bus 0000:0a: [bus 0a-0d] partially hidden behind transparent bridge 0000:09 [bus 09-0a]
[    0.356801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.356976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.357035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.357082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.357129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.357175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.357250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.357411]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.357496]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00
[    0.357498] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.363297] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.363363] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.363421] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.363478] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.363535] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.363592] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.363648] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.363704] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.363861] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.363867] vgaarb: loaded
[    0.363869] vgaarb: bridge control possible 0000:01:00.0
[    0.364121] SCSI subsystem initialized
[    0.364208] libata version 3.00 loaded.
[    0.364234] ACPI: bus type usb registered
[    0.364267] usbcore: registered new interface driver usbfs
[    0.364278] usbcore: registered new interface driver hub
[    0.364309] usbcore: registered new device driver usb
[    0.364411] PCI: Using ACPI for IRQ routing
[    0.376268] PCI: pci_cache_line_size set to 64 bytes
[    0.376478] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.376485] e820: reserve RAM buffer [mem 0x7fed0000-0x7fffffff]
[    0.376633] NetLabel: Initializing
[    0.376636] NetLabel:  domain hash size = 128
[    0.376637] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.376652] NetLabel:  unlabeled traffic allowed by default
[    0.376729] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.376736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.376742] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.380141] Switching to clocksource hpet
[    0.390173] AppArmor: AppArmor Filesystem Enabled
[    0.390214] pnp: PnP ACPI init
[    0.390238] ACPI: bus type pnp registered
[    0.397984] pnp 00:00: [bus 00-ff]
[    0.397990] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.397993] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.397996] pnp 00:00: [io  0x0d00-0xffff window]
[    0.397999] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.398002] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.398005] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.398008] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.398010] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.398013] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.398016] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.398018] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.398021] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.398024] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.398026] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.398029] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.398035] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.398038] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.398041] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.398043] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.398046] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.398149] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.398239] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.398242] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.398245] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.398247] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.398250] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.398253] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.398255] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.398258] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.398336] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.398340] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.398343] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.398346] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.398349] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.398353] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.398356] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.398359] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.398364] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.398579] pnp 00:02: [io  0x0000-0x001f]
[    0.398582] pnp 00:02: [io  0x0081-0x0091]
[    0.398585] pnp 00:02: [io  0x0093-0x009f]
[    0.398588] pnp 00:02: [io  0x00c0-0x00df]
[    0.398590] pnp 00:02: [dma 4]
[    0.398637] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.398648] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.398697] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.398774] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.398845] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.398849] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.398863] pnp 00:05: [io  0x00f0]
[    0.398876] pnp 00:05: [irq 13]
[    0.398927] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.398942] pnp 00:06: [io  0x002e-0x002f]
[    0.398944] pnp 00:06: [io  0x004e-0x004f]
[    0.398947] pnp 00:06: [io  0x0061]
[    0.398949] pnp 00:06: [io  0x0063]
[    0.398952] pnp 00:06: [io  0x0065]
[    0.398954] pnp 00:06: [io  0x0067]
[    0.398957] pnp 00:06: [io  0x0080]
[    0.398959] pnp 00:06: [io  0x0092]
[    0.398961] pnp 00:06: [io  0x00b2-0x00b3]
[    0.398964] pnp 00:06: [io  0x0680-0x069f]
[    0.398967] pnp 00:06: [io  0x0800-0x080f]
[    0.398969] pnp 00:06: [io  0x1000-0x107f]
[    0.398972] pnp 00:06: [io  0x1180-0x11bf]
[    0.398974] pnp 00:06: [io  0x1640-0x164f]
[    0.398977] pnp 00:06: [io  0xfe00-0xfe7f]
[    0.398979] pnp 00:06: [io  0xfe80-0xfeff]
[    0.399066] system 00:06: [io  0x0680-0x069f] has been reserved
[    0.399070] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.399073] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.399076] system 00:06: [io  0x1180-0x11bf] has been reserved
[    0.399079] system 00:06: [io  0x1640-0x164f] has been reserved
[    0.399082] system 00:06: [io  0xfe00-0xfe7f] has been reserved
[    0.399086] system 00:06: [io  0xfe80-0xfeff] has been reserved
[    0.399090] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.399101] pnp 00:07: [io  0x0070-0x0077]
[    0.399108] pnp 00:07: [irq 8]
[    0.399159] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.399176] pnp 00:08: [io  0x0060]
[    0.399179] pnp 00:08: [io  0x0064]
[    0.399189] pnp 00:08: [irq 1]
[    0.399238] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.399254] pnp 00:09: [irq 12]
[    0.399306] pnp 00:09: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.399331] pnp: PnP ACPI: found 10 devices
[    0.399333] ACPI: ACPI bus type pnp unregistered
[    0.405924] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-08] add_size 200000
[    0.405950] pci 0000:09:03.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.405954] pci 0000:09:03.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.405958] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 09-0a] add_size 1000
[    0.405962] pci 0000:09:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.405966] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 09-0a] add_size 4000000
[    0.405978] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.405981] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.405984] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.405991] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.405995] pci 0000:00:1c.4: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref]
[    0.406000] pci 0000:00:1e.0: BAR 13: assigned [io  0x7000-0x7fff]
[    0.406004] pci 0000:00:1f.3: BAR 0: assigned [mem 0x84200000-0x842000ff]
[    0.406013] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[    0.406017] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.406020] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.406025] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.406030] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.406036] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.406040] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.406047] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.406053] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.406063] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.406067] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.406074] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.406080] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.406090] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[    0.406094] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.406101] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.406107] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.406116] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[    0.406121] pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
[    0.406128] pci 0000:00:1c.4:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.406134] pci 0000:00:1c.4:   bridge window [mem 0x84000000-0x841fffff 64bit pref]
[    0.406145] pci 0000:09:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.406148] pci 0000:09:03.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.406152] pci 0000:09:03.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.406155] pci 0000:09:03.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.406158] pci 0000:09:03.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.406163] pci 0000:09:03.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.406166] pci 0000:09:03.0: BAR 13: assigned [io  0x7000-0x70ff]
[    0.406169] pci 0000:09:03.0: BAR 14: assigned [io  0x7400-0x74ff]
[    0.406173] pci 0000:09:03.0: CardBus bridge to [bus 0a-0d]
[    0.406175] pci 0000:09:03.0:   bridge window [io  0x7000-0x70ff]
[    0.406182] pci 0000:09:03.0:   bridge window [io  0x7400-0x74ff]
[    0.406189] pci 0000:09:03.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.406195] pci 0000:09:03.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.406201] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[    0.406205] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.406213] pci 0000:00:1e.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.406219] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.406287] pci 0000:00:1e.0: setting latency timer to 64
[    0.406303] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.406306] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.406309] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.406312] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[    0.406315] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.406318] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.406321] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.406324] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.406327] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.406330] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.406333] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.406336] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.406338] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.406341] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.406344] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.406347] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff]
[    0.406350] pci_bus 0000:08: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
[    0.406353] pci_bus 0000:09: resource 0 [io  0x7000-0x7fff]
[    0.406356] pci_bus 0000:09: resource 1 [mem 0xfc100000-0xfc1fffff]
[    0.406359] pci_bus 0000:09: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.406362] pci_bus 0000:09: resource 4 [io  0x0000-0xffff]
[    0.406365] pci_bus 0000:09: resource 5 [mem 0x00000000-0xfffffffff]
[    0.406368] pci_bus 0000:0a: resource 0 [io  0x7000-0x70ff]
[    0.406371] pci_bus 0000:0a: resource 1 [io  0x7400-0x74ff]
[    0.406373] pci_bus 0000:0a: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.406376] pci_bus 0000:0a: resource 3 [mem 0x88000000-0x8bffffff]
[    0.406424] NET: Registered protocol family 2
[    0.406548] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.407239] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.409470] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.410010] TCP: Hash tables configured (established 262144 bind 65536)
[    0.410012] TCP: reno registered
[    0.410024] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.410052] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.410169] NET: Registered protocol family 1
[    0.410479] pci 0000:01:00.0: Boot video device
[    0.410552] PCI: CLS 64 bytes, default 64
[    0.410598] Simple Boot Flag at 0x36 set to 0x1
[    0.411069] audit: initializing netlink socket (disabled)
[    0.411083] type=2000 audit(1353687863.404:1): initialized
[    0.436039] Freeing initrd memory: 14876k freed
[    0.438671] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.441689] VFS: Disk quotas dquot_6.5.2
[    0.441770] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.442739] fuse init (API version 7.19)
[    0.442875] msgmni has been set to 3990
[    0.443500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.443555] io scheduler noop registered
[    0.443558] io scheduler deadline registered (default)
[    0.443602] io scheduler cfq registered
[    0.443882] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.444069] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.444227] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.444394] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.444550] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    0.444699] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.444742] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.444836] intel_idle: does not run on family 6 model 15
[    0.446399] ACPI: AC Adapter [ADP1] (on-line)
[    0.446509] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.447043] ACPI: Lid Switch [LID0]
[    0.447127] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.447133] ACPI: Power Button [PWRB]
[    0.447233] ACPI: Requesting acpi_cpufreq
[    0.449255] Monitor-Mwait will be used to enter C-1 state
[    0.449264] Monitor-Mwait will be used to enter C-2 state
[    0.449270] Monitor-Mwait will be used to enter C-3 state
[    0.449279] Marking TSC unstable due to TSC halts in idle
[    0.449297] ACPI: acpi_idle registered with cpuidle
[    0.466909] thermal LNXTHERM:00: registered as thermal_zone0
[    0.466912] ACPI: Thermal Zone [TZ00] (79 C)
[    0.467042] ACPI: Invalid active0 threshold
[    0.468372] thermal LNXTHERM:01: registered as thermal_zone1
[    0.468375] ACPI: Thermal Zone [TZ01] (79 C)
[    0.468428] ACPI: Battery Slot [BAT0] (battery present)
[    0.468466] GHES: HEST is not enabled!
[    0.468576] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.470275] Linux agpgart interface v0.103
[    0.472303] brd: module loaded
[    0.473192] loop: module loaded
[    0.473323] ahci 0000:00:1f.2: version 3.0
[    0.473390] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    0.473463] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    0.473468] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[    0.473475] ahci 0000:00:1f.2: setting latency timer to 64
[    0.473989] scsi0 : ahci
[    0.474094] scsi1 : ahci
[    0.474178] scsi2 : ahci
[    0.474311] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 45
[    0.474315] ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 45
[    0.474318] ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 45
[    0.474381] ata_piix 0000:00:1f.1: version 2.13
[    0.474448] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.474773] scsi3 : ata_piix
[    0.474853] scsi4 : ata_piix
[    0.475262] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    0.475265] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    0.475623] Fixed MDIO Bus: probed
[    0.475676] tun: Universal TUN/TAP device driver, 1.6
[    0.475678] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.475839] PPP generic driver version 2.4.2
[    0.475898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.475941] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.475946] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.475954] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.475993] ehci_hcd 0000:00:1a.7: debug port 1
[    0.479875] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.479895] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
[    0.488020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.488047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.488050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.488053] usb usb1: Product: EHCI Host Controller
[    0.488056] usb usb1: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
[    0.488058] usb usb1: SerialNumber: 0000:00:1a.7
[    0.488241] hub 1-0:1.0: USB hub found
[    0.488247] hub 1-0:1.0: 4 ports detected
[    0.488352] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.488356] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.488363] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.488447] ehci_hcd 0000:00:1d.7: debug port 1
[    0.492358] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.492374] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
[    0.499930] ACPI: Battery Slot [BAT0] (battery present)
[    0.504022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.504058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.504062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.504064] usb usb2: Product: EHCI Host Controller
[    0.504067] usb usb2: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
[    0.504070] usb usb2: SerialNumber: 0000:00:1d.7
[    0.504196] hub 2-0:1.0: USB hub found
[    0.504201] hub 2-0:1.0: 6 ports detected
[    0.504289] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.504313] uhci_hcd: USB Universal Host Controller Interface driver
[    0.504342] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.504347] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.504353] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.504394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.504436] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.504440] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.504442] usb usb3: Product: UHCI Host Controller
[    0.504445] usb usb3: Manufacturer: Linux 3.5.0-18-generic uhci_hcd
[    0.504448] usb usb3: SerialNumber: 0000:00:1a.0
[    0.504560] hub 3-0:1.0: USB hub found
[    0.504565] hub 3-0:1.0: 2 ports detected
[    0.504649] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.504653] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.504660] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.504700] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.504743] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.504747] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.504750] usb usb4: Product: UHCI Host Controller
[    0.504752] usb usb4: Manufacturer: Linux 3.5.0-18-generic uhci_hcd
[    0.504755] usb usb4: SerialNumber: 0000:00:1a.1
[    0.504857] hub 4-0:1.0: USB hub found
[    0.504862] hub 4-0:1.0: 2 ports detected
[    0.504947] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.504951] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.504960] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.504990] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    0.505032] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.505035] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.505038] usb usb5: Product: UHCI Host Controller
[    0.505041] usb usb5: Manufacturer: Linux 3.5.0-18-generic uhci_hcd
[    0.505044] usb usb5: SerialNumber: 0000:00:1d.0
[    0.505144] hub 5-0:1.0: USB hub found
[    0.505149] hub 5-0:1.0: 2 ports detected
[    0.505231] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.505235] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.505241] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.505281] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    0.505321] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.505324] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.505327] usb usb6: Product: UHCI Host Controller
[    0.505330] usb usb6: Manufacturer: Linux 3.5.0-18-generic uhci_hcd
[    0.505333] usb usb6: SerialNumber: 0000:00:1d.1
[    0.505433] hub 6-0:1.0: USB hub found
[    0.505438] hub 6-0:1.0: 2 ports detected
[    0.505524] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.505528] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.505534] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.505564] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    0.505605] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.505608] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.505611] usb usb7: Product: UHCI Host Controller
[    0.505614] usb usb7: Manufacturer: Linux 3.5.0-18-generic uhci_hcd
[    0.505616] usb usb7: SerialNumber: 0000:00:1d.2
[    0.505719] hub 7-0:1.0: USB hub found
[    0.505723] hub 7-0:1.0: 2 ports detected
[    0.505860] usbcore: registered new interface driver libusual
[    0.505902] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.509641] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.509648] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.509796] mousedev: PS/2 mouse device common for all mice
[    0.510011] rtc_cmos 00:07: RTC can wake from S4
[    0.510176] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.510210] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.510300] device-mapper: uevent: version 1.0.3
[    0.510384] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.510442] cpuidle: using governor ladder
[    0.510516] cpuidle: using governor menu
[    0.510519] EFI Variables Facility v0.08 2004-May-17
[    0.510815] ashmem: initialized
[    0.510976] TCP: cubic registered
[    0.511106] NET: Registered protocol family 10
[    0.511334] NET: Registered protocol family 17
[    0.511348] Key type dns_resolver registered
[    0.511558] PM: Hibernation image not present or could not be loaded.
[    0.511573] registered taskstats version 1
[    0.512474] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.514594] Key type trusted registered
[    0.517034] Key type encrypted registered
[    0.520086]   Magic number: 4:830:439
[    0.520162] pcieport 0000:00:1c.0: hash matches
[    0.520245] rtc_cmos 00:07: setting system clock to 2012-11-23 16:24:24 UTC (1353687864)
[    0.520810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.520813] EDD information not available.
[    0.639484] ata4.00: ATAPI: SONY    DVD RW AW-G540A, 1.74, max UDMA/33
[    0.652318] ata4.00: configured for UDMA/33
[    0.792071] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.792092] ata2: SATA link down (SStatus 0 SControl 300)
[    0.792119] ata3: SATA link down (SStatus 0 SControl 300)
[    0.792714] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    0.792718] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    0.793385] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
[    0.793388] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.794146] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    0.794150] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    0.794816] ata1.00: configured for UDMA/100
[    0.794985] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
[    0.795156] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    0.795159] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.795217] sd 0:0:0:0: [sda] Write Protect is off
[    0.795221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.795288] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.844501]  sda: sda1 sda2 < sda5 >
[    0.845047] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.846157] scsi 3:0:0:0: CD-ROM            SONY     DVD RW AW-G540A  1.74 PQ: 0 ANSI: 5
[    0.847683] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.847686] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.847810] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    0.847940] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    0.849507] Freeing unused kernel memory: 928k freed
[    0.849824] Write protecting the kernel read-only data: 12288k
[    0.854732] Freeing unused kernel memory: 1464k freed
[    0.858894] Freeing unused kernel memory: 1120k freed
[    0.879043] udevd[100]: starting version 175
[    0.969401] sky2: driver version 1.30
[    0.969491] sky2 0000:08:00.0: Yukon-2 FE chip revision 1
[    0.969607] sky2 0000:08:00.0: irq 46 for MSI/MSI-X
[    0.969898] sky2 0000:08:00.0: eth0: addr 00:13:a9:c4:2d:f4
[    1.036114] firewire_ohci 0000:09:03.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.184066] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    1.325062] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.393639] usb 7-1: New USB device found, idVendor=044e, idProduct=300d
[    1.393645] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.393648] usb 7-1: Product: UGX
[    1.393651] usb 7-1: Manufacturer: ALPS
[    1.393653] usb 7-1: SerialNumber: 0119e50b
[    1.536219] firewire_core 0000:09:03.1: created device fw0: GUID 0800460302722537, S400
[   16.282179] Adding 2093052k swap on /dev/sda5.  Priority:-1 extents:1 across:2093052k
[   16.289613] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.325291] udevd[337]: starting version 175
[   16.373432] lp: driver loaded but no devices found
[   16.550941] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.792706] Bluetooth: Core ver 2.16
[   16.792759] NET: Registered protocol family 31
[   16.792761] Bluetooth: HCI device and connection manager initialized
[   16.792764] Bluetooth: HCI socket layer initialized
[   16.792766] Bluetooth: L2CAP socket layer initialized
[   16.792772] Bluetooth: SCO socket layer initialized
[   16.798576] Bluetooth: RFCOMM TTY layer initialized
[   16.798584] Bluetooth: RFCOMM socket layer initialized
[   16.798586] Bluetooth: RFCOMM ver 1.11
[   16.802541] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.802546] Bluetooth: BNEP filters: protocol multicast
[   16.829493] ppdev: user-space parallel port driver
[   16.861798] type=1400 audit(1353687880.839:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=515 comm="apparmor_parser"
[   16.869850] type=1400 audit(1353687880.847:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=515 comm="apparmor_parser"
[   16.967989] sony_laptop: Sony Notebook Control Driver v0.6
[   16.970991] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:28/SNY5001:00/input/input3
[   16.971093] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:28/SNY5001:00/input/input4
[   17.008419] type=1400 audit(1353687880.987:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=603 comm="apparmor_parser"
[   17.009430] type=1400 audit(1353687880.987:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=603 comm="apparmor_parser"
[   17.009725] type=1400 audit(1353687880.987:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=603 comm="apparmor_parser"
[   17.023067] cfg80211: Calling CRDA to update world regulatory domain
[   17.023232] ACPI Warning: 0x0000000000001060-0x000000000000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   17.023240] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.023242] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   17.023246] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   17.023252] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.023256] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   17.023261] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.023263] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   17.036530] usbcore: registered new interface driver btusb
[   17.037107] yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
[   17.037134] yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
[   17.037137] yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
[   17.037144] yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
[   17.059121] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   17.059126] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   17.094538] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[   17.116092] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   17.116098] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   17.116259] iwl3945 0000:06:00.0: irq 47 for MSI/MSI-X
[   17.122220] Registered led device: phy0-led
[   17.122258] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   17.143265] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   17.219723] nvidia: module license 'NVIDIA' taints kernel.
[   17.219729] Disabling lock debugging due to kernel taint
[   17.269485] yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   17.269493] yenta_cardbus 0000:09:03.0: Socket status: 30000006
[   17.269498] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[   17.271214] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[   17.271220] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xfc100000-0xfc1fffff]
[   17.271224] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc100000-0xfc1fffff:
[   17.271230]  excluding 0xfc100000-0xfc10ffff
[   17.271243] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[   17.271246] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
[   17.271256]  excluding 0x80000000-0x83ffffff
[   17.283481] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   17.288601] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.51  Tue Sep 18 17:16:56 PDT 2012
[   17.314852] init: failsafe main process (683) killed by TERM signal
[   17.437067] type=1400 audit(1353687881.415:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=801 comm="apparmor_parser"
[   17.437491] type=1400 audit(1353687881.415:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=801 comm="apparmor_parser"
[   17.438235] type=1400 audit(1353687881.415:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=800 comm="apparmor_parser"
[   17.438653] type=1400 audit(1353687881.415:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=800 comm="apparmor_parser"
[   17.456172] type=1400 audit(1353687881.435:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=808 comm="apparmor_parser"
[   17.499413] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   17.499418] cfg80211: World regulatory domain updated:
[   17.499420] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.499423] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.499425] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.499428] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.499430] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.499432] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.502092] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[   17.520633] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   17.525525] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   17.535472] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[   17.537830] kvm: disabled by bios
[   17.549621] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   17.549630]  excluding 0xc0000-0xcffff 0xdc000-0xfffff
[   17.549659] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   17.549673]  clean.
[   17.549691] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   17.549699]  excluding 0x60000000-0x60ffffff
[   17.593693] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   17.593941] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   17.615079] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.615489] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.634702] kvm: disabled by bios
[   17.642397] sky2 0000:08:00.0: eth0: enabling interface
[   17.642776] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.648774] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.877427] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[   17.893967] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[   17.948937] init: udev-fallback-graphics main process (1021) terminated with status 1
[   20.063239] NVRM: GPU at 0000:01:00: GPU-1a455f80-d1cf-d29c-a4da-136eeeca4307
[   24.881025] wlan0: authenticate with 00:1a:2b:57:bc:38
[   24.886112] wlan0: send auth to 00:1a:2b:57:bc:38 (try 1/3)
[   24.901187] wlan0: authenticated
[   24.904039] wlan0: associate with 00:1a:2b:57:bc:38 (try 1/3)
[   24.931048] wlan0: RX AssocResp from 00:1a:2b:57:bc:38 (capab=0x411 status=0 aid=1)
[   24.933531] wlan0: associated
[   24.933831] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   35.426843] audit_printk_skb: 48 callbacks suppressed
[   35.426847] type=1701 audit(1353687899.403:28): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=2135 comm="chromium-browse" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f201fd00ed9 code=0x50000
[   45.207315] type=1701 audit(1353687909.180:29): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=2252 comm="chromium-browse" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f41711f9ed9 code=0x50000
[  115.764387] iwl3945 0000:06:00.0: Card state received: HW:Kill SW:On
[  115.764527] wlan0: deauthenticating from 00:1a:2b:57:bc:38 by local choice (reason=3)
[  115.788504] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.788511] iwl3945 0000:06:00.0: Error sending C_REM_STA: enqueue_hcmd failed: -5
[  115.788515] iwl3945 0000:06:00.0: Error removing station 00:1a:2b:57:bc:38
[  115.804136] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.804141] iwl3945 0000:06:00.0: Error sending C_QOS_PARAM: enqueue_hcmd failed: -5
[  115.804147] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.804150] iwl3945 0000:06:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[  115.804153] iwl3945 0000:06:00.0: Error setting new configuration (-5).
[  115.804156] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.804158] iwl3945 0000:06:00.0: Error sending C_RXON_ASSOC: enqueue_hcmd failed: -5
[  115.816074] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.816083] iwl3945 0000:06:00.0: Error sending C_LEDS: enqueue_hcmd failed: -5
[  115.818864] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.818869] iwl3945 0000:06:00.0: Error sending C_RXON_ASSOC: enqueue_hcmd failed: -5
[  115.818874] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.818877] iwl3945 0000:06:00.0: Error sending C_LEDS: enqueue_hcmd failed: -5
[  115.818883] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.818886] iwl3945 0000:06:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[  115.818888] iwl3945 0000:06:00.0: Error setting new configuration (-5).
[  115.818928] cfg80211: All devices are disconnected, going to restore regulatory settings
[  115.818933] cfg80211: Restoring regulatory settings
[  115.818938] cfg80211: Calling CRDA to update world regulatory domain
[  115.824070] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  115.824076] iwl3945 0000:06:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[  115.824079] iwl3945 0000:06:00.0: Error setting new configuration (-5).
[  115.828034] iwl3945 0000:06:00.0: Master Disable Timed Out, 100 usec
[  115.831540] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  115.835820] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  115.835826] cfg80211: World regulatory domain updated:
[  115.835828] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  115.835831] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  115.835834] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  115.835836] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  115.835838] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  115.835841] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  115.968081] usb 7-1: USB disconnect, device number 2
[  118.936118] usb 7-1: new full-speed USB device number 3 using uhci_hcd
[  119.145399] usb 7-1: New USB device found, idVendor=044e, idProduct=300d
[  119.145409] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  119.145417] usb 7-1: Product: UGX
[  119.145423] usb 7-1: Manufacturer: ALPS
[  119.145429] usb 7-1: SerialNumber: 0119e50b
[  119.882862] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  120.855569] iwl3945 0000:06:00.0: Card state received: HW:Kill SW:On
[  120.856332] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  120.856343] iwl3945 0000:06:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[  120.856350] iwl3945 0000:06:00.0: Error setting new configuration (-5).
[  120.856364] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  120.856370] iwl3945 0000:06:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[  120.856376] iwl3945 0000:06:00.0: Error setting new configuration (-5).
[  120.860105] iwl3945 0000:06:00.0: Not sending command - RF KILL
[  120.860115] iwl3945 0000:06:00.0: Error sending C_RXON: enqueue_hcmd failed: -5
[  120.860124] iwl3945 0000:06:00.0: Error setting new configuration (-5).
[  120.864022] iwl3945 0000:06:00.0: Master Disable Timed Out, 100 usec
[  120.928063] usb 7-1: USB disconnect, device number 3
[  123.408131] usb 7-1: new full-speed USB device number 4 using uhci_hcd
[  123.656111] usb 7-1: New USB device found, idVendor=044e, idProduct=300d
[  123.656121] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  123.656128] usb 7-1: Product: UGX
[  123.656135] usb 7-1: Manufacturer: ALPS
[  123.656141] usb 7-1: SerialNumber: 0119e50b
[  124.895837] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  131.908785] wlan0: authenticate with 00:1a:2b:57:bc:38
[  131.910608] wlan0: send auth to 00:1a:2b:57:bc:38 (try 1/3)
[  131.912450] wlan0: authenticated
[  131.916077] wlan0: associate with 00:1a:2b:57:bc:38 (try 1/3)
[  131.918766] wlan0: RX AssocResp from 00:1a:2b:57:bc:38 (capab=0x411 status=0 aid=1)
[  131.922063] wlan0: associated
[  131.922678] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


[if]

@franchumoriste, dmesg çıktısında bir kaç hata var ama bunlar donanımsal. İlerki çekirdeklerde düzelir inşallah.

Önce Synaptic kuralım. Paket yönetimini kolaylaştıracaktır.

Kod Seç Genişlet

sudo apt-get install synaptic sonra LibreOffice ve Thunderbird'e ait paketleri kaldırıp yeniden kuralım.

Kod Seç Genişlet

dpkg -l | grep -E "thunderbird|libreoffice" çıktısına bakayım.

[franchumoriste]

evet sony vaio kullanıcıyım donanım için söylediklerin doğru. dahili webcamimi kullanamıyorum mesela onun gibi eksiklerim var.

çıktı aşağıda:

Kod Seç Genişlet


bugra@bugrapc:~$ dpkg -l | grep -E "thunderbird|libreoffice"
ii  libreoffice-base-core                     1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- shared library
ii  libreoffice-calc                          1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- spreadsheet
ii  libreoffice-common                        1:3.6.2~rc2-0ubuntu4                      all          office productivity suite -- arch-independent files
ii  libreoffice-core                          1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- arch-dependent files
ii  libreoffice-draw                          1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- drawing
ii  libreoffice-emailmerge                    1:3.6.2~rc2-0ubuntu4                      all          office productivity suite -- email mail merge
ii  libreoffice-gnome                         1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- GNOME integration
ii  libreoffice-gtk                           1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- GTK+ integration
ii  libreoffice-help-en-us                    1:3.6.2~rc2-0ubuntu4                      all          office productivity suite -- English_american help
ii  libreoffice-impress                       1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- presentation
ii  libreoffice-math                          1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- equation editor
ii  libreoffice-ogltrans                      1:3.6.2~rc2-0ubuntu4                      amd64        LibreOffice Impress extension for transitions using OpenGL
ii  libreoffice-pdfimport                     1.0.6+LibO3.6.2~rc2-0ubuntu4              amd64        LibreOffice extension for importing PDF documents
ii  libreoffice-presentation-minimizer        1.0.4+LibO3.6.2~rc2-0ubuntu4              amd64        LibreOffice extension for size-efficient presentations
ii  libreoffice-presenter-console             1.1.1+LibO3.6.2~rc2-0ubuntu4              amd64        LibreOffice Impress extension for a separate presenter's console
ii  libreoffice-style-human                   1:3.6.2~rc2-0ubuntu4                      all          office productivity suite -- Human symbol style
ii  libreoffice-style-tango                   1:3.6.2~rc2-0ubuntu4                      all          office productivity suite -- Tango symbol style
ii  libreoffice-writer                        1:3.6.2~rc2-0ubuntu4                      amd64        office productivity suite -- word processor
ii  thunderbird                               17.0+build2-0ubuntu0.12.10.1              amd64        Email, RSS and newsgroup client with integrated spam filter
bugra@bugrapc:~$


[if]

@franchumoriste, kamera değil de başka sorunlar. Onlara sonra da bakarız.

Synaptik paket yöneticisini açıp libreoffice diye aratın ve libreoffice yazan tüm paketleri sağ tıklayıp tamamen kaldır diyerek kaldırın. İşlemden sonra arama kutusundaki libreoffice yazısını silip sol taraftaki seçkede (menü) yarım kalmış yapılandırma ya da kendiliğinden kaldırılabilir kısmına gelip ne var ne yok tamamen kaldırın. bu da bittikten sonra Sinaptik'i kapatabilirsiniz.

Ev dizinini açın, ctrl+h ile gizli dosyaları gösterin, .config dizini altındaki libreoffice dosyasını silin.

[franchumoriste]

dediklerinizi yaptım

[if]

Bu yaptıklarımızla libreoffice'i ayarlarıyla birlikte sistemden kazıdık sayılır. Şimdi yeniden kuralım, umarım bu sefer düzgün çalışır.

[franchumoriste]

tamam

[if]

LibreOffice'in herhangi bir bileşenini açıp deneyelim.

[franchumoriste]

libreOffice'i yüklemeyi denedim başarısız sonuç aldım. ikinci kez deneyince yine aynı hatayı verdi. ikinci deneyişimi daha kısa olduğu için aşağıda veriyorum:

Kod Seç Genişlet


bugra@bugrapc:~$ sudo apt-get install libreoffice
[sudo] password for bugra:
sudo: unable to open /var/lib/sudo/bugra/1: Read-only file system
W: Not using locking for read only lock file /var/lib/dpkg/lock
E: Unable to write to /var/cache/apt/
E: The package lists or status file could not be parsed or opened.


sorun nerde bilmiyorum ama benim dosya sistemim yazılabilir gözükmüyor