Dell İnspiron 6400 Broadcom Wireles ve Tp-*bağlantı Sorunu.

[turkıshpower]

Merhaba arkadaşlar. Dell 6400 dizüstü bilgisyarım var. Kubuntu 12.04 kablosuz ağ kartını görmüyor . Şimdi arkadaşlar ben internete kablosuz üzerinden bağlanıyorum. Bu da yetmezmiş gibi dizüstü bilgisayarın kablosuz sinyal alıcısı bana zayıf geldiği için TP-LİNK WN722N kaplosuz bağdaştırıcı kullanıyorum. Yani Windows üzerinden de internet ihtiyazcımı bu şekilde sağlıyorum. Tabi onda iki wireless kablosuz alıcısının çakışması gibi bir sorun yok. Kubuntuda wirelesi kablosuzu açmak için fn+f2 kombinasyonunu kullandığımda eğer tp *bağlantı bağlıysa açılır gibi oluyor(Not: Bu kombinasyon dizüstünün kendi wirelesini kablosuz kartını açmak için) ve ağları görüyor ancak bağlandıktan sonra internete girmeye çalıştığımda bağlantı kopuyor. Randıman alamıyorum ve usbden bağlanan kablosuz adaptörün bilgisayarın kendi kombinasyonuyla açılmak istemesi bana garip geldi. Kısacası galiba ilk önce dell 6400ün kendi broadcom wirelsini kablosuz kartını tanıtıp sonrada usb tp linki tanıtmalıyım. Ancak kendi wirelesinida kablosuz kartını datanıtamadım 12.04'de.


bcmwl-kernel-source_5.100.82.38+bdcom-0ubuntu6.1_i386.deb gibi bir çok paket yükledim ama değişen bir şey olmadı .

Not: İnternete kablolu bağlama gibi bir seçeneğim ne yazık ki yok.


Lspci

Kod Seç Genişlet

ali@ali-kubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)                                                             
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)                                                             
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)                                                                                 
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)                                                                                                 
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)                                                                                                 
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)                                                                                         
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)                                                                                         
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)                                                                                         
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon Mobility X1400
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
ali@ali-kubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon Mobility X1400
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)


Düzenleme Notu: Lütfen imlâ kurallarına uyunuz.

[if]

Diğer çıktıları da alayım @turkishpower.

http://forum.ubuntu-tr.net/index.php?topic=28764.0

[turkıshpower]

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS"

uname -a

Kod Seç Genişlet

Linux ali-kubuntu 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686 i686 i386 GNU/Linux

rfkill list

Kod Seç Genişlet


0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
1: dell-wifi: Wireless LAN
        Soft blocked: yes
        Hard blocked: yes
2: dell-bluetooth: Bluetooth
        Soft blocked: yes
        Hard blocked: yes
3: phy1: Wireless LAN
        Soft blocked: no
        Hard blocked: no

lsusb

Kod Seç Genişlet

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 005 Device 002: ID 09da:90a0 A4 Tech Co., Ltd

sudo lshw -C network

Kod Seç Genişlet

*-network               
       description: Network controller
       product: BCM4311 802.11b/g WLAN
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:0b:00.0
       version: 01
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=b43-pci-bridge latency=0
       resources: irq:16 memory:dfcfc000-dfcfffff
  *-network
       description: Ethernet interface
       product: BCM4401-B0 100Base-TX
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth1
       version: 02
       serial: 00:15:c5:a9:06:da
       size: 10Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=half latency=64 link=no multicast=yes port=twisted pair speed=10Mbit/s
       resources: irq:17 memory:df9fe000-df9fffff
  *-network:0 DISABLED
       description: Wireless interface
       physical id: 1
       bus info: usb@1:5
       logical name: wlan1
       serial: f8:d1:11:0d:0d:88
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=ath9k_htc driverversion=3.2.0-23-generic-pae firmware=1.3 link=no multicast=yes wireless=IEEE 802.11bgn
  *-network:1 DISABLED
       description: Wireless interface
       physical id: 2
       logical name: wlan0
       serial: 00:16:cf:15:8f:ac
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=b43 driverversion=3.2.0-23-generic-pae firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg


ifconfig

Kod Seç Genişlet

eth1      Link encap:Ethernet  HWaddr 00:15:c5:a9:06:da 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:17

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:144 errors:0 dropped:0 overruns:0 frame:0
          TX packets:144 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:10480 (10.4 KB)  TX bytes:10480 (10.4 KB)


iwconfig

Kod Seç Genişlet

lo        no wireless extensions.

wlan1     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
         
eth1      no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on


iwconfigiwlist scanning

Kod Seç Genişlet

iwconfigiwlist: command not found

lsmod

Kod Seç Genişlet

Module                  Size  Used by
rfcomm                 38139  0
parport_pc             32114  0
bnep                   17830  2
bluetooth             158438  10 rfcomm,bnep
ppdev                  12849  0
ath9k_htc              90811  0
dell_laptop            13671  0
dcdbas                 14098  1 dell_laptop
arc4                   12473  4
ath9k_common           13781  1 ath9k_htc
ath9k_hw              391523  2 ath9k_htc,ath9k_common
psmouse                72846  0
serio_raw              13027  0
ath                    19387  3 ath9k_htc,ath9k_common,ath9k_hw
b43                   342643  0
snd_hda_codec_idt      60251  1
joydev                 17393  0
r592                   17808  0
r852                   17901  0
sm_common              16737  1 r852
nand                   49667  2 r852,sm_common
nand_ids                8547  1 nand
mtd                    35584  2 sm_common,nand
nand_bch               13003  1 nand
bch                    21757  1 nand_bch
nand_ecc               13070  1 nand
memstick               15857  1 r592
snd_hda_intel          32765  3
snd_hda_codec         109562  2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80845  2 snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0
mac80211              436455  2 ath9k_htc,b43
snd_rawmidi            25424  1 snd_seq_midi
mac_hid                13077  0
snd_seq_midi_event     14475  1 snd_seq_midi
cfg80211              178679  4 ath9k_htc,ath,b43,mac80211
bcma                   25651  1 b43
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
snd_timer              28931  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    62064  15 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              14635  1 snd
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
lp                     17455  0
parport                40930  3 parport_pc,ppdev,lp
usbhid                 41906  0
hid                    77367  1 usbhid
b44                    31364  0
firewire_ohci          40172  0
firewire_core          56906  1 firewire_ohci
crc_itu_t              12627  1 firewire_core
sdhci_pci              18324  0
sdhci                  28241  1 sdhci_pci
radeon                733693  3
ttm                    65344  1 radeon
drm_kms_helper         45466  1 radeon
drm                   197692  5 radeon,ttm,drm_kms_helper
video                  19068  0
ssb                    50691  2 b43,b44
i2c_algo_bit           13199  1 radeon



dmesg

Kod Seç Genişlet

0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 2M  num_reg: 2      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 358de000 - 36c67000
[    0.000000] ACPI: RSDP 000fc370 00014 (v00 DELL  )
[    0.000000] ACPI: RSDT 7fed3a96 00038 (v01 DELL    M07     27D60609 ASL  00000061)
[    0.000000] ACPI: FACP 7fed4800 00074 (v01 DELL    M07     27D60609 ASL  00000061)
[    0.000000] ACPI: DSDT 7fed5400 039FD (v01 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 7fee3c00 00040
[    0.000000] ACPI: APIC 7fed5000 00068 (v01 DELL    M07     27D60609 ASL  00000047)
[    0.000000] ACPI: MCFG 7fed4fc0 0003E (v16 DELL    M07     27D60609 ASL  00000061)
[    0.000000] ACPI: BOOT 7fed4bc0 00028 (v01 DELL    M07     27D60609 ASL  00000061)
[    0.000000] ACPI: SSDT 7fed3ace 004DC (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1154MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0007fed3
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fed3
[    0.000000] On node 0 totalpages: 523874
[    0.000000] free_area_init_node: node 0, pgdat c186b480, node_mem_map f48de200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2310 pages used for memmap
[    0.000000]   HighMem zone: 293327 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s34240 r0 d23104 u1048576
[    0.000000] pcpu-alloc: s34240 r0 d23104 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519780
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic-pae root=UUID=72d3da33-a91f-4e95-b0c5-a97e14351cb6 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8383536 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007fed3)
[    0.000000] Memory: 2039580k/2095948k available (5825k kernel code, 55916k reserved, 2850k data, 740k init, 1182548k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1879000 - 0xc1932000   ( 740 kB)
[    0.000000]       .data : 0xc15b04bc - 0xc1878d00   (2850 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15b04bc   (5825 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1828.697 MHz processor.
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.39 BogoMIPS (lpj=7314788)
[    0.004009] pid_max: default: 32768 minimum: 301
[    0.004039] Security Framework initialized
[    0.004065] AppArmor: AppArmor initialized
[    0.004068] Yama: becoming mindful.
[    0.004168] Mount-cache hash table entries: 512
[    0.004358] Initializing cgroup subsys cpuacct
[    0.004366] Initializing cgroup subsys memory
[    0.004378] Initializing cgroup subsys devices
[    0.004382] Initializing cgroup subsys freezer
[    0.004385] Initializing cgroup subsys blkio
[    0.004396] Initializing cgroup subsys perf_event
[    0.004428] Disabled fast string operations
[    0.004434] CPU: Physical Processor ID: 0
[    0.004437] CPU: Processor Core ID: 0
[    0.004441] mce: CPU supports 6 MCE banks
[    0.004452] CPU0: Thermal monitoring enabled (TM2)
[    0.004457] using mwait in idle threads.
[    0.010963] ACPI: Core revision 20110623
[    0.015306] ftrace: allocating 26594 entries in 53 pages
[    0.016062] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.016491] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059122] CPU0: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.060003] Performance Events: Core events, core PMU driver.
[    0.060003] ... version:                1
[    0.060003] ... bit width:              40
[    0.060003] ... generic registers:      2
[    0.060003] ... value mask:             000000ffffffffff
[    0.060003] ... max period:             000000007fffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             0000000000000003
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] CPU 1 irqstacks, hard=f44ac000 soft=f44ae000
[    0.060003] Booting Node   0, Processors  #1 Ok.
[    0.060003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.148008] TSC synchronization [CPU#0 -> CPU#1]:
[    0.148008] Measured 3663609961 cycles TSC warp between CPUs, turning off TSC clock.
[    0.148008] Marking TSC unstable due to check_tsc_sync_source failed
[    0.148050] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148107] Brought up 2 CPUs
[    0.148111] Total of 2 processors activated (7315.22 BogoMIPS).
[    0.149632] devtmpfs: initialized
[    0.149632] EVM: security.selinux
[    0.149632] EVM: security.SMACK64
[    0.149632] EVM: security.capability
[    0.149632] print_constraints: dummy:
[    0.149632] RTC time: 14:07:17, date: 08/02/12
[    0.149632] NET: Registered protocol family 16
[    0.149632] Trying to unpack rootfs image as initramfs...
[    0.149781] EISA bus registered
[    0.149803] ACPI: bus type pci registered
[    0.149903] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.149908] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.149911] PCI: Using MMCONFIG for extended config space
[    0.152015] PCI: Using configuration type 1 for base access
[    0.152028] dmi type 0xB1 record - unknown flag
[    0.164273] bio: create slab <bio-0> at 0
[    0.164273] ACPI: Added _OSI(Module Device)
[    0.164273] ACPI: Added _OSI(Processor Device)
[    0.164273] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.164273] ACPI: Added _OSI(Processor Aggregator Device)
[    0.165752] ACPI: EC: Look up EC in DSDT
[    0.170939] ACPI: SSDT 7fed41f5 001AF (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.171308] ACPI: Dynamic OEM Table Load:
[    0.171313] ACPI: SSDT   (null) 001AF (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.171445] ACPI: SSDT 7fed3faa 001C6 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.171792] ACPI: Dynamic OEM Table Load:
[    0.171796] ACPI: SSDT   (null) 001C6 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.172122] ACPI: SSDT 7fed43a4 00090 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.172481] ACPI: Dynamic OEM Table Load:
[    0.172486] ACPI: SSDT   (null) 00090 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.172606] ACPI: SSDT 7fed4170 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.172955] ACPI: Dynamic OEM Table Load:
[    0.172959] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.173187] ACPI: Interpreter enabled
[    0.173197] ACPI: (supports S0 S3 S4 S5)
[    0.173222] ACPI: Using IOAPIC for interrupt routing
[    0.196782] ACPI: No dock devices found.
[    0.196782] HEST: Table not found.
[    0.196782] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.203788] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.217782] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.217787] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.217791] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.217795] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.217799] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[    0.217803] pci_root PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff] (ignored)
[    0.217806] pci_root PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff] (ignored)
[    0.217810] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff] (ignored)
[    0.217814] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff] (ignored)
[    0.217832] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[    0.217898] pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
[    0.217957] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.217963] pci 0000:00:01.0: PME# disabled
[    0.218036] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.218061] pci 0000:00:1b.0: reg 10: [mem 0xdfffc000-0xdfffffff 64bit]
[    0.218175] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.218181] pci 0000:00:1b.0: PME# disabled
[    0.218214] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.218333] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.218339] pci 0000:00:1c.0: PME# disabled
[    0.218378] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[    0.218498] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.218504] pci 0000:00:1c.3: PME# disabled
[    0.218542] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.218628] pci 0000:00:1d.0: reg 20: [io  0xbf80-0xbf9f]
[    0.218690] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.218776] pci 0000:00:1d.1: reg 20: [io  0xbf60-0xbf7f]
[    0.218839] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.218923] pci 0000:00:1d.2: reg 20: [io  0xbf40-0xbf5f]
[    0.218987] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.219071] pci 0000:00:1d.3: reg 20: [io  0xbf20-0xbf3f]
[    0.219142] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.219169] pci 0000:00:1d.7: reg 10: [mem 0xffa80000-0xffa803ff]
[    0.219284] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.219291] pci 0000:00:1d.7: PME# disabled
[    0.219317] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.219421] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[    0.219548] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.219559] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.219566] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.219572] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.219580] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.219645] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[    0.219668] pci 0000:00:1f.2: reg 10: [io  0x01f0-0x01f7]
[    0.219682] pci 0000:00:1f.2: reg 14: [io  0x03f4-0x03f7]
[    0.219696] pci 0000:00:1f.2: reg 18: [io  0x0170-0x0177]
[    0.219709] pci 0000:00:1f.2: reg 1c: [io  0x0374-0x0377]
[    0.219723] pci 0000:00:1f.2: reg 20: [io  0xbfa0-0xbfaf]
[    0.219785] pci 0000:00:1f.2: PME# supported from D3hot
[    0.219791] pci 0000:00:1f.2: PME# disabled
[    0.219810] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.219883] pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
[    0.219991] pci 0000:01:00.0: [1002:7145] type 0 class 0x000300
[    0.220024] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.220037] pci 0000:01:00.0: reg 14: [io  0xee00-0xeeff]
[    0.220050] pci 0000:01:00.0: reg 18: [mem 0xdfdf0000-0xdfdfffff]
[    0.220084] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.220130] pci 0000:01:00.0: supports D1 D2
[    0.220147] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.220164] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.220169] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.220174] pci 0000:00:01.0:   bridge window [mem 0xdfd00000-0xdfefffff]
[    0.220180] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.220321] pci 0000:0b:00.0: [14e4:4311] type 0 class 0x000280
[    0.220388] pci 0000:0b:00.0: reg 10: [mem 0xdfcfc000-0xdfcfffff]
[    0.220879] pci 0000:0b:00.0: supports D1 D2
[    0.220964] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.220991] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[    0.221000] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.221074] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
[    0.221080] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.221086] pci 0000:00:1c.3:   bridge window [mem 0xdfa00000-0xdfbfffff]
[    0.221096] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[    0.221146] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200
[    0.221169] pci 0000:03:00.0: reg 10: [mem 0xdf9fe000-0xdf9fffff]
[    0.221271] pci 0000:03:00.0: supports D1 D2
[    0.221274] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221281] pci 0000:03:00.0: PME# disabled
[    0.221303] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
[    0.221329] pci 0000:03:01.0: reg 10: [mem 0xdf9fd800-0xdf9fdfff]
[    0.221434] pci 0000:03:01.0: supports D1 D2
[    0.221437] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221443] pci 0000:03:01.0: PME# disabled
[    0.221467] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
[    0.221492] pci 0000:03:01.1: reg 10: [mem 0xdf9fd500-0xdf9fd5ff]
[    0.221595] pci 0000:03:01.1: supports D1 D2
[    0.221598] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221605] pci 0000:03:01.1: PME# disabled
[    0.221629] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
[    0.221652] pci 0000:03:01.2: reg 10: [mem 0xdf9fd600-0xdf9fd6ff]
[    0.221756] pci 0000:03:01.2: supports D1 D2
[    0.221758] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221765] pci 0000:03:01.2: PME# disabled
[    0.221787] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
[    0.221811] pci 0000:03:01.3: reg 10: [mem 0xdf9fd700-0xdf9fd7ff]
[    0.221915] pci 0000:03:01.3: supports D1 D2
[    0.221918] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221924] pci 0000:03:01.3: PME# disabled
[    0.221999] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.222008] pci 0000:00:1e.0:   bridge window [mem 0xdf900000-0xdf9fffff]
[    0.222018] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.222022] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.222050] pci_bus 0000:00: on NUMA node 0
[    0.222057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.222411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.222471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.222553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.222630] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.222704]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.222709]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.222711] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.231978] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[    0.232086] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[    0.232176] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[    0.232265] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[    0.232357] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.232452] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.232548] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.232644] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.232870] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.232879] vgaarb: loaded
[    0.232882] vgaarb: bridge control possible 0000:01:00.0
[    0.233060] i2c-core: driver [aat2870] using legacy suspend method
[    0.233063] i2c-core: driver [aat2870] using legacy resume method
[    0.233186] SCSI subsystem initialized
[    0.233269] libata version 3.00 loaded.
[    0.233343] usbcore: registered new interface driver usbfs
[    0.233361] usbcore: registered new interface driver hub
[    0.233400] usbcore: registered new device driver usb
[    0.233532] PCI: Using ACPI for IRQ routing
[    0.236139] PCI: pci_cache_line_size set to 64 bytes
[    0.236269] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[    0.236272] reserve RAM buffer: 000000007fed3400 - 000000007fffffff
[    0.236433] NetLabel: Initializing
[    0.236436] NetLabel:  domain hash size = 128
[    0.236438] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.236453] NetLabel:  unlabeled traffic allowed by default
[    0.236654] hpet clockevent registered
[    0.236659] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.236666] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.236673] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.240087] Switching to clocksource hpet
[    0.253260] AppArmor: AppArmor Filesystem Enabled
[    0.253313] pnp: PnP ACPI init
[    0.253339] ACPI: bus type pnp registered
[    0.263598] pnp 00:00: [mem 0x00000000-0x0009fbff]
[    0.263603] pnp 00:00: [mem 0x0009fc00-0x0009ffff]
[    0.263606] pnp 00:00: [mem 0x000c0000-0x000cffff]
[    0.263609] pnp 00:00: [mem 0x000e0000-0x000fffff]
[    0.263613] pnp 00:00: [mem 0x00100000-0x7fed33ff]
[    0.263616] pnp 00:00: [mem 0x7fed3400-0x7fefffff]
[    0.263619] pnp 00:00: [mem 0x7ff00000-0x7fffffff]
[    0.263622] pnp 00:00: [mem 0xffb00000-0xffffffff]
[    0.263625] pnp 00:00: [mem 0xfec00000-0xfec0ffff]
[    0.263628] pnp 00:00: [mem 0xfee00000-0xfee0ffff]
[    0.263632] pnp 00:00: [mem 0xfed20000-0xfed9ffff]
[    0.263639] pnp 00:00: [mem 0xf0000000-0xf0003fff]
[    0.263642] pnp 00:00: [mem 0xf0004000-0xf0004fff]
[    0.263645] pnp 00:00: [mem 0xf0005000-0xf0005fff]
[    0.263648] pnp 00:00: [mem 0xf0006000-0xf0006fff]
[    0.263652] pnp 00:00: [mem 0xf0008000-0xf000bfff]
[    0.263655] pnp 00:00: [mem 0xe0000000-0xefffffff]
[    0.263779] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[    0.263784] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[    0.263788] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.263792] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.263797] system 00:00: [mem 0x00100000-0x7fed33ff] could not be reserved
[    0.263801] system 00:00: [mem 0x7fed3400-0x7fefffff] has been reserved
[    0.263805] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
[    0.263809] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[    0.263813] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.263817] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.263821] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.263825] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.263829] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.263833] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.263838] system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved
[    0.263842] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.263846] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.263852] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.270826] pnp 00:01: [bus 00-ff]
[    0.270831] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.270835] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.270838] pnp 00:01: [io  0x0d00-0xffff window]
[    0.270841] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.270845] pnp 00:01: [mem 0x000d0000-0x000dffff window]
[    0.270848] pnp 00:01: [mem 0x80000000-0xdfffffff window]
[    0.270851] pnp 00:01: [mem 0xf0007000-0xf0007fff window]
[    0.270855] pnp 00:01: [mem 0xf000c000-0xfebfffff window]
[    0.270858] pnp 00:01: [mem 0xfec10000-0xfed1ffff window]
[    0.270862] pnp 00:01: [mem 0xfeda0000-0xfed9ffff window disabled]
[    0.270865] pnp 00:01: [mem 0xfee10000-0xffafffff window]
[    0.270978] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.271004] pnp 00:02: [io  0x0092]
[    0.271007] pnp 00:02: [io  0x00b2]
[    0.271010] pnp 00:02: [io  0x0020-0x0021]
[    0.271013] pnp 00:02: [io  0x00a0-0x00a1]
[    0.271017] pnp 00:02: [irq 0 disabled]
[    0.271020] pnp 00:02: [io  0x04d0-0x04d1]
[    0.271023] pnp 00:02: [io  0x1000-0x1005]
[    0.271026] pnp 00:02: [io  0x1008-0x100f]
[    0.271050] pnp 00:02: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.271055] pnp 00:02: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.271116] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.271122] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.271145] pnp 00:03: [io  0xf400-0xf4fe]
[    0.271149] pnp 00:03: [io  0x0086]
[    0.271151] pnp 00:03: [io  0x00b3]
[    0.271154] pnp 00:03: [io  0x1006-0x1007]
[    0.271157] pnp 00:03: [io  0x100a-0x1059]
[    0.271160] pnp 00:03: [io  0x1060-0x107f]
[    0.271163] pnp 00:03: [io  0x1080-0x10bf]
[    0.271166] pnp 00:03: [io  0x10c0-0x10df]
[    0.271169] pnp 00:03: [io  0x1010-0x102f]
[    0.271172] pnp 00:03: [io  0x0809]
[    0.271192] pnp 00:03: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.271197] pnp 00:03: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.271202] pnp 00:03: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.271207] pnp 00:03: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.271268] system 00:03: [io  0xf400-0xf4fe] has been reserved
[    0.271273] system 00:03: [io  0x1080-0x10bf] has been reserved
[    0.271277] system 00:03: [io  0x10c0-0x10df] has been reserved
[    0.271280] system 00:03: [io  0x0809] has been reserved
[    0.271285] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.271321] pnp 00:04: [irq 12]
[    0.271366] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.271388] pnp 00:05: [io  0x0060]
[    0.271391] pnp 00:05: [io  0x0064]
[    0.271394] pnp 00:05: [io  0x0062]
[    0.271397] pnp 00:05: [io  0x0066]
[    0.271404] pnp 00:05: [irq 1]
[    0.271449] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.271471] pnp 00:06: [io  0x0070-0x0071]
[    0.271478] pnp 00:06: [irq 8]
[    0.271481] pnp 00:06: [io  0x0072-0x0077]
[    0.271523] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.271547] pnp 00:07: [io  0x0061]
[    0.271550] pnp 00:07: [io  0x0063]
[    0.271553] pnp 00:07: [io  0x0065]
[    0.271559] pnp 00:07: [io  0x0067]
[    0.271602] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.271624] pnp 00:08: [io  0x0c80-0x0cff]
[    0.271627] pnp 00:08: [io  0x0910-0x091f]
[    0.271630] pnp 00:08: [io  0x0920-0x092f]
[    0.271633] pnp 00:08: [io  0x0930-0x097f]
[    0.271709] system 00:08: [io  0x0c80-0x0cff] could not be reserved
[    0.271713] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.271717] system 00:08: [io  0x0920-0x092f] has been reserved
[    0.271721] system 00:08: [io  0x0930-0x097f] has been reserved
[    0.271725] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.271751] pnp 00:09: [dma 4]
[    0.271754] pnp 00:09: [io  0x0000-0x000f]
[    0.271757] pnp 00:09: [io  0x0080-0x0085]
[    0.271760] pnp 00:09: [io  0x0087-0x008f]
[    0.271763] pnp 00:09: [io  0x00c0-0x00df]
[    0.271766] pnp 00:09: [io  0x0010-0x001f]
[    0.271768] pnp 00:09: [io  0x0090-0x0091]
[    0.271771] pnp 00:09: [io  0x0093-0x009f]
[    0.271817] pnp 00:09: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.271838] pnp 00:0a: [io  0x00f0-0x00ff]
[    0.271846] pnp 00:0a: [irq 13]
[    0.271895] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.272309] pnp: PnP ACPI: found 11 devices
[    0.272312] ACPI: ACPI bus type pnp unregistered
[    0.272317] PnPBIOS: Disabled by ACPI PNP
[    0.309716] PCI: max bus depth: 1 pci_try_num: 2
[    0.309781] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.309788] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.309793] pci 0000:01:00.0: BAR 6: assigned [mem 0xdfd00000-0xdfd1ffff pref]
[    0.309797] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.309801] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.309807] pci 0000:00:01.0:   bridge window [mem 0xdfd00000-0xdfefffff]
[    0.309812] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.309819] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[    0.309823] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.309831] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
[    0.309838] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.309847] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
[    0.309852] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.309860] pci 0000:00:1c.3:   bridge window [mem 0xdfa00000-0xdfbfffff]
[    0.309866] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[    0.309876] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.309883] pci 0000:00:1e.0:   bridge window [mem 0xdf900000-0xdf9fffff]
[    0.309924] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.309931] pci 0000:00:01.0: setting latency timer to 64
[    0.309940] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.309946] pci 0000:00:1c.0: setting latency timer to 64
[    0.309960] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.309966] pci 0000:00:1c.3: setting latency timer to 64
[    0.309976] pci 0000:00:1e.0: setting latency timer to 64
[    0.309982] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.309985] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.309989] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.309992] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfefffff]
[    0.309996] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.310000] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.310003] pci_bus 0000:0b: resource 1 [mem 0xdfc00000-0xdfcfffff]
[    0.310007] pci_bus 0000:0b: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.310010] pci_bus 0000:0c: resource 0 [io  0xd000-0xdfff]
[    0.310014] pci_bus 0000:0c: resource 1 [mem 0xdfa00000-0xdfbfffff]
[    0.310017] pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
[    0.310021] pci_bus 0000:03: resource 1 [mem 0xdf900000-0xdf9fffff]
[    0.310024] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
[    0.310028] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[    0.310093] NET: Registered protocol family 2
[    0.310200] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.310557] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.311266] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.311634] TCP: Hash tables configured (established 131072 bind 65536)
[    0.311638] TCP reno registered
[    0.311642] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.311656] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.311786] NET: Registered protocol family 1
[    0.311845] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.311872] pci 0000:00:1d.0: PCI INT A disabled
[    0.311887] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.311910] pci 0000:00:1d.1: PCI INT B disabled
[    0.311928] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.311951] pci 0000:00:1d.2: PCI INT C disabled
[    0.311966] pci 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.311990] pci 0000:00:1d.3: PCI INT D disabled
[    0.312046] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.312079] pci 0000:00:1d.7: PCI INT A disabled
[    0.312102] pci 0000:01:00.0: Boot video device
[    0.312127] PCI: CLS 64 bytes, default 64
[    0.312136] Simple Boot Flag at 0x79 set to 0x1
[    0.312647] audit: initializing netlink socket (disabled)
[    0.312661] type=2000 audit(1343916436.308:1): initialized
[    0.345517] highmem bounce pool size: 64 pages
[    0.345525] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.357534] VFS: Disk quotas dquot_6.5.2
[    0.357639] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.358491] fuse init (API version 7.17)
[    0.358625] msgmni has been set to 1673
[    0.359084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.359121] io scheduler noop registered
[    0.359124] io scheduler deadline registered
[    0.359134] io scheduler cfq registered (default)
[    0.359306] pcieport 0000:00:01.0: setting latency timer to 64
[    0.359351] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.359422] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.359483] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.359577] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.359638] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.359771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.359808] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.359908] intel_idle: MWAIT substates: 0x22220
[    0.359911] intel_idle: does not run on family 6 model 14
[    0.360318] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.360662] ACPI: AC Adapter [AC] (on-line)
[    0.360777] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.361095] ACPI: Lid Switch [LID]
[    0.361160] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.361167] ACPI: Power Button [PBTN]
[    0.361232] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.361237] ACPI: Sleep Button [SBTN]
[    0.362235] ACPI: acpi_idle registered with cpuidle
[    0.367479] thermal LNXTHERM:00: registered as thermal_zone0
[    0.367483] ACPI: Thermal Zone [THM] (49 C)
[    0.367508] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.367523] ACPI: Battery Slot [BAT0] (battery absent)
[    0.367579] ERST: Table is not found!
[    0.367582] GHES: HEST is not enabled!
[    0.367721] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.368133] ACPI: Battery Slot [BAT0] (battery absent)
[    0.368159] isapnp: Scanning for PnP cards...
[    0.722375] isapnp: No Plug & Play device found
[    0.726703] Freeing initrd memory: 20004k freed
[    0.808581] Linux agpgart interface v0.103
[    0.811276] brd: module loaded
[    0.812587] loop: module loaded
[    0.812861] ata_piix 0000:00:1f.2: version 2.13
[    0.812894] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.812902] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.812958] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.813431] scsi0 : ata_piix
[    0.813559] scsi1 : ata_piix
[    0.814159] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[    0.814164] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[    0.814764] Fixed MDIO Bus: probed
[    0.814800] tun: Universal TUN/TAP device driver, 1.6
[    0.814804] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.814882] PPP generic driver version 2.4.2
[    0.815049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.815073] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.815095] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.815100] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.815170] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.815201] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.815215] ehci_hcd 0000:00:1d.7: debug port 1
[    0.819100] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.819124] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
[    0.832024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.832219] hub 1-0:1.0: USB hub found
[    0.832226] hub 1-0:1.0: 8 ports detected
[    0.832354] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.832375] uhci_hcd: USB Universal Host Controller Interface driver
[    0.832398] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.832408] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.832413] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.832481] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.832513] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[    0.832705] hub 2-0:1.0: USB hub found
[    0.832711] hub 2-0:1.0: 2 ports detected
[    0.832813] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.832822] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.832827] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.832894] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.832937] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[    0.833126] hub 3-0:1.0: USB hub found
[    0.833131] hub 3-0:1.0: 2 ports detected
[    0.833228] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.833237] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.833242] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.833314] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.833356] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[    0.833543] hub 4-0:1.0: USB hub found
[    0.833548] hub 4-0:1.0: 2 ports detected
[    0.833646] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.833656] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.833660] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.833732] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.833776] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[    0.833968] hub 5-0:1.0: USB hub found
[    0.833973] hub 5-0:1.0: 2 ports detected
[    0.834153] usbcore: registered new interface driver libusual
[    0.834224] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.836802] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.836811] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.837011] mousedev: PS/2 mouse device common for all mice
[    0.837311] rtc_cmos 00:06: RTC can wake from S4
[    0.837472] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.837518] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.837595] device-mapper: uevent: version 1.0.3
[    0.837709] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.837760] EISA: Probing bus 0 at eisa.0
[    0.837824] EISA: Mainboard MG_FFFF detected.
[    0.837851] Cannot allocate resource for EISA slot 1
[    0.837855] Cannot allocate resource for EISA slot 2
[    0.837884] EISA: Detected 0 cards.
[    0.837898] cpufreq-nforce2: No nForce2 chipset.
[    0.837995] cpuidle: using governor ladder
[    0.838143] cpuidle: using governor menu
[    0.838146] EFI Variables Facility v0.08 2004-May-17
[    0.838557] TCP cubic registered
[    0.838738] NET: Registered protocol family 10
[    0.839623] NET: Registered protocol family 17
[    0.839659] Registering the dns_resolver key type
[    0.839685] Using IPI No-Shortcut mode
[    0.839900] PM: Hibernation image not present or could not be loaded.
[    0.839917] registered taskstats version 1
[    0.845068] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.853472]   Magic number: 8:709:130
[    0.853546] acpi device:05: hash matches
[    0.853604] rtc_cmos 00:06: setting system clock to 2012-08-02 14:07:17 UTC (1343916437)
[    0.854250] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.854253] EDD information not available.
[    0.976563] ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 00000009, max UDMA/100
[    0.976567] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    0.976641] ata2.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AD15, max UDMA/33
[    0.992449] ata1.00: configured for UDMA/100
[    0.992464] ata2.00: configured for UDMA/33
[    0.992655] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2250B 0000 PQ: 0 ANSI: 5
[    0.992856] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.992888] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.992936] sd 0:0:0:0: [sda] Write Protect is off
[    0.992940] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.992978] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.994236]  sda: sda1 < sda5 sda6 > sda2 sda3
[    0.995128] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.997317] scsi 1:0:0:0: CD-ROM            PHILIPS  DVD+-RW SDVD8820 AD15 PQ: 0 ANSI: 5
[    1.005889] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.005896] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.006196] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.006370] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.006560] Freeing unused kernel memory: 740k freed
[    1.006939] Write protecting the kernel text: 5828k
[    1.006970] Write protecting the kernel read-only data: 2376k
[    1.006972] NX-protecting the kernel data: 4412k
[    1.028541] udevd[91]: starting version 175
[    1.087034] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.087048] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
[    1.096688] [drm] Initialized drm 1.1.0 20060810
[    1.108092] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[    1.108109] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[    1.108123] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[    1.108133] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[    1.110733] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input4
[    1.110803] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    1.110879] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    1.136921] [drm] radeon defaulting to kernel modesetting.
[    1.136926] [drm] radeon kernel modesetting enabled.
[    1.137005] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.137011] radeon 0000:01:00.0: setting latency timer to 64
[    1.143194] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1028:0x2003).
[    1.143219] [drm] register mmio base: 0xDFDF0000
[    1.143221] [drm] register mmio size: 65536
[    1.143361] ATOM BIOS: M54P
[    1.143385] [drm] Generation 2 PCI interface, using max accessible memory
[    1.143392] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (128M used)
[    1.143397] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[    1.143421] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.143423] [drm] Driver supports precise vblank timestamp query.
[    1.143472] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[    1.143479] radeon 0000:01:00.0: radeon: using MSI.
[    1.143506] [drm] radeon: irq initialized.
[    1.144672] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[    1.144704] [drm] Detected VRAM RAM=256M, BAR=256M
[    1.144707] [drm] RAM width 64bits DDR
[    1.147711] [TTM] Zone  kernel: Available graphics memory: 438888 kiB.
[    1.147715] [TTM] Zone highmem: Available graphics memory: 1030162 kiB.
[    1.147718] [TTM] Initializing pool allocator.
[    1.147749] [drm] radeon: 128M of VRAM memory ready
[    1.147752] [drm] radeon: 512M of GTT memory ready.
[    1.147776] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    1.150111] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    1.150118] NMI: PCI system error (SERR) for reason b1 on CPU 0.
[    1.150124] Dazed and confused, but trying to continue
[    1.151768] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    1.151798] radeon 0000:01:00.0: WB enabled
[    1.151874] [drm] Loading R500 Microcode
[    1.156470] sdhci: Secure Digital Host Controller Interface driver
[    1.156474] sdhci: Copyright(c) Pierre Ossman
[    1.156877] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 19)
[    1.156908] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    1.157965] mmc0: no vmmc regulator found
[    1.158997] Registered led device: mmc0::
[    1.162426] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[    1.168835] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.172162] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
[    1.188215] [drm] radeon: ring at 0x0000000010001000
[    1.188251] [drm] ring test succeeded in 9 usecs
[    1.188503] [drm] radeon: ib pool ready.
[    1.188726] [drm] ib test succeeded in 0 usecs
[    1.189093] [drm] Radeon Display Connectors
[    1.189096] [drm] Connector 0:
[    1.189098] [drm]   VGA
[    1.189101] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    1.189104] [drm]   Encoders:
[    1.189106] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    1.189108] [drm] Connector 1:
[    1.189110] [drm]   LVDS
[    1.189113] [drm]   DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[    1.189116] [drm]   Encoders:
[    1.189118] [drm]     LCD1: INTERNAL_LVTM1
[    1.189120] [drm] Connector 2:
[    1.189122] [drm]   S-video
[    1.189123] [drm]   Encoders:
[    1.189125] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    1.189145] [drm] radeon: power management initialized
[    1.232123] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[    1.256924] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.277331] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[    1.277340] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[    1.277348] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[    1.316255] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[    1.316283] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[    1.342322] b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:15:c5:a9:06:da
[    1.614594] composite sync not supported
[    1.652079] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    1.686516] [drm] fb mappable at 0xC00C0000
[    1.686519] [drm] vram apper at 0xC0000000
[    1.686521] [drm] size 4096000
[    1.686523] [drm] fb depth is 24
[    1.686526] [drm]    pitch is 5120
[    1.686652] fbcon: radeondrmfb (fb0) is primary device
[    1.686724] Console: switching to colour frame buffer device 160x50
[    1.686766] fb0: radeondrmfb frame buffer device
[    1.686769] drm: registered panic notifier
[    1.686777] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[    1.732434] firewire_core: created device fw0: GUID 344fc0003d58b050, S400
[    1.833897] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input5
[    1.834118] generic-usb 0003:09DA:90A0.0001: input,hidraw0: USB HID v1.00 Mouse [A4TECH USB Device] on usb-0000:00:1d.3-1/input0
[    1.838616] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input6
[    1.838950] generic-usb 0003:09DA:90A0.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [A4TECH USB Device] on usb-0000:00:1d.3-1/input1
[    1.838970] usbcore: registered new interface driver usbhid
[    1.838973] usbhid: USB HID core driver
[    1.932482] composite sync not supported
[    2.907048] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   13.163244] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.192104] udevd[356]: starting version 175
[   13.204842] Adding 3929084k swap on /dev/sda5.  Priority:-1 extents:1 across:3929084k
[   13.254190] lp: driver loaded but no devices found
[   13.360492] cfg80211: Calling CRDA to update world regulatory domain
[   13.411661] intel_rng: FWH not detected
[   13.417982] leds_ss4200: no LED devices found
[   13.450798] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   13.450870] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   13.450909] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   13.462099] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[   13.462111] r852 0000:03:01.3: setting latency timer to 64
[   13.463797] r852: Non dma capable device detected, dma disabled
[   13.463812] r852: driver loaded successfully
[   13.465060] r592 0000:03:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[   13.465071] r592 0000:03:01.2: setting latency timer to 64
[   13.465927] r592: driver successfully loaded
[   13.511006] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[   13.513310] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   13.536466] udevd[398]: renamed network interface eth0 to eth1
[   13.538441] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   13.539373] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   13.582818] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   13.582824] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582828] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   13.582832] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582835] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   13.582839] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582842] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   13.582846] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582849] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   13.582853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582856] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   13.582860] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582863] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   13.582867] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582871] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   13.582874] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582878] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   13.582881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582885] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   13.582889] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582892] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   13.582896] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   13.582899] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   13.582903] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[   13.582906] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   13.582910] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[   13.582913] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   13.582917] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[   13.635762] type=1400 audit(1343905650.275:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=544 comm="apparmor_parser"
[   13.636426] type=1400 audit(1343905650.279:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=544 comm="apparmor_parser"
[   13.636764] type=1400 audit(1343905650.279:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=544 comm="apparmor_parser"
[   13.658089] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   14.021051] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.022218] Registered led device: b43-phy0::tx
[   14.022277] Registered led device: b43-phy0::rx
[   14.022339] Registered led device: b43-phy0::radio
[   14.022389] Broadcom 43xx driver loaded [ Features: PNL ]
[   14.107874] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   14.107881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107884] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   14.107888] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107892] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   14.107896] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107899] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   14.107903] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107906] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   14.107910] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107913] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   14.107917] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107920] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   14.107924] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107927] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   14.107931] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107935] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   14.107938] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107942] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   14.107945] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107949] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   14.107953] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107956] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   14.107960] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.107963] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   14.107967] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.107970] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   14.107974] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.107979] cfg80211: World regulatory domain updated:
[   14.107981] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.107985] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.107989] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.107992] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.108021] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.108024] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.205718] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000/0x0
[   14.243421] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   14.470735] Bluetooth: Core ver 2.16
[   14.470820] NET: Registered protocol family 31
[   14.470823] Bluetooth: HCI device and connection manager initialized
[   14.470827] Bluetooth: HCI socket layer initialized
[   14.470830] Bluetooth: L2CAP socket layer initialized
[   14.470838] Bluetooth: SCO socket layer initialized
[   14.476880] ppdev: user-space parallel port driver
[   14.495660] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.495665] Bluetooth: BNEP filters: protocol multicast
[   14.560317] usb 1-5: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[   14.638100] init: failsafe main process (669) killed by TERM signal
[   14.652979] Bluetooth: RFCOMM TTY layer initialized
[   14.652988] Bluetooth: RFCOMM socket layer initialized
[   14.652991] Bluetooth: RFCOMM ver 1.11
[   14.665490] type=1400 audit(1343905651.307:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=789 comm="apparmor_parser"
[   14.666203] type=1400 audit(1343905651.307:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=789 comm="apparmor_parser"
[   14.766611] type=1400 audit(1343905651.407:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=833 comm="apparmor_parser"
[   14.775435] type=1400 audit(1343905651.415:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=832 comm="apparmor_parser"
[   14.776306] type=1400 audit(1343905651.419:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=833 comm="apparmor_parser"
[   14.777923] type=1400 audit(1343905651.419:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 comm="apparmor_parser"
[   14.778265] type=1400 audit(1343905651.419:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser"
[   14.795811] ath9k_htc 1-5:1.0: ath9k_htc: HTC initialized with 33 credits
[   14.933557] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.940997] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   14.941484] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   14.990079] ath9k_htc 1-5:1.0: ath9k_htc: FW Version: 1.3
[   14.990084] ath: EEPROM regdomain: 0x809c
[   14.990086] ath: EEPROM indicates we should expect a country code
[   14.990089] ath: doing EEPROM country->regdmn map search
[   14.990092] ath: country maps to regdmn code: 0x52
[   14.990094] ath: Country alpha2 being used: CN
[   14.990097] ath: Regpair used: 0x52
[   14.990101] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   14.990105] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990109] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   14.990113] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990116] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   14.990120] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990123] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   14.990127] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990130] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   14.990134] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990137] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   14.990141] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990144] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   14.990148] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990151] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   14.990155] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990158] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   14.990162] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990165] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   14.990169] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990172] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   14.990176] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.990179] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   14.990183] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   14.990186] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   14.990308] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   14.990313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990316] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   14.990320] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990323] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   14.990327] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990330] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   14.990334] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990337] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   14.990341] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990344] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   14.990348] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990352] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   14.990355] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990359] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   14.990363] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990366] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   14.990370] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990373] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   14.990377] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990380] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   14.990384] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.990387] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   14.990391] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.990394] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   14.990398] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.990401] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   14.990405] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.991634] cfg80211: Calling CRDA for country: CN
[   14.991674] ieee80211 phy1: Atheros AR9271 Rev:1
[   14.993306] Registered led device: ath9k_htc-phy1
[   14.993311] usb 1-5: ath9k_htc: USB layer initialized
[   14.994329] usbcore: registered new interface driver ath9k_htc
[   15.002528] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   15.002534] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002538] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   15.002542] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002545] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   15.002549] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002552] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   15.002556] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002559] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   15.002563] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002566] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   15.002570] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002573] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   15.002577] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002580] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   15.002584] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002587] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   15.002591] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002594] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   15.002598] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002601] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   15.002605] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002608] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   15.002612] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002615] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   15.002619] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002622] cfg80211: Disabling freq 2484 MHz
[   15.002628] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   15.002632] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002635] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   15.002639] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002642] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   15.002646] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002649] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   15.002653] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002656] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   15.002660] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002663] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   15.002667] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002670] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   15.002674] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002677] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   15.002681] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002684] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   15.002688] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002691] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   15.002695] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002698] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   15.002702] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002705] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   15.002709] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002712] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   15.002716] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.002719] cfg80211: Disabling freq 2484 MHz
[   15.002722] cfg80211: Regulatory domain changed to country: CN
[   15.002725] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.002729] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   15.002732] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   15.088568] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   15.404638] composite sync not supported
[   15.692533] composite sync not supported
[   38.852496] composite sync not supported
[   54.824839] composite sync not supported
[   65.727651] CE: hpet increased min_delta_ns to 20113 nsec



dmesg | tail

Kod Seç Genişlet

ali@ali-kubuntu:~$ dmesg | tail
[   15.002722] cfg80211: Regulatory domain changed to country: CN
[   15.002725] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.002729] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   15.002732] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   15.088568] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   15.404638] composite sync not supported
[   15.692533] composite sync not supported
[   38.852496] composite sync not supported
[   54.824839] composite sync not supported
[   65.727651] CE: hpet increased min_delta_ns to 20113 nsec





Buyrun hepsini ekledim

[heartsmagic]

@turkıshpower, makinede kablosuz ağ desteğini açan donanımsal bir anahtar ya da tuş kombinasyonu varsa lütfen kullanarak açmayı dene. Zira çıktılardan hem donanımsal hem de yazılımsal olarak kapalı olduğunu görüyoruz.

[turkıshpower]

Evet var, Fn+f2 kombinasyonu ancak açınca kendi kablosuz alıcısı etkinleşmiyor eğer takarsam usbden bağlı alıcı etkinleşiyor.

[heartsmagic]

Ben USB kablosuz aygıtını atlamışım. Bu ayıt zaten biraz sorunlu:
http://forum.ubuntu-tr.net/index.php?topic=34890.0

Üzerine bir de senin makinenin dahili kartı etkin durumda. Önce onu bir devre dışı bırakmayı deneyelim.

Kod Seç Genişlet

gksudo gedit /etc/modprobe.d/blacklist.conf ile dosyayı aç ve en alta şu iki satırı ekle:

Kod Seç Genişlet

blacklist b43
blacklist b44

Modül isimlerinden pek emin değilim ancak şansımızı bir deneyelim. Sistemi yeniden başlatıp:

Kod Seç Genişlet

lsmod çıktısını geçersin buraya.

Eğer en azından dahili kartı devre dışı bırakabilirsek yukarıdaki başlığı senin için de hayata geçirmeye çalışırız. Orada çözüm bulamadık bakalım sende neler olacak.

[turkıshpower]

O zaman şöyle yapalım usb aygıtını boşverelim zira kendi donanımıyla bağlanabilmem dizüstüyü taşıdığım için daha önemli evde diğer dizüstü bilisayarını internet paylaşımına açıp kendi dizüstümden yine internete bağlanabilirim , haklısınız bu cihazın tp-linkin sanıırm linux dağıtımlarında ciddi bir sürücü sorunu var diğer forumlardan ve yabancı sitelerden de bunu gördüm. Dahili kablosuz alıcıyı kullanabilmek için ne yapmam gerek forumda bir çok konu var ama 12.04 için değiller .

[heartsmagic]

12.04 için olmasına gerek yok, büyük değişiklikler olmadıysa önceki tavsiyeler de geçerli olabilir. Mesela şunu denedin mi:
http://forum.ubuntu-tr.net/index.php?topic=29949.0