acer 5520g *bilgisayarm kablosuz ağına bağlanmıyor

Başlatan galenga, 23 Temmuz 2012 - 08:10:57

« önceki - sonraki »

0 Üyeler ve 3 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1 2
Kullanıcı Eylemleri

galenga

23 Temmuz 2012 - 08:10:57 Son düzenlenme: 23 Temmuz 2012 - 19:21:09 if
                         S.a. arkadaşlar, aranıza daha yeni katıldım. Belki önceden açılmış konulara yazmam gerekliydi ama oradaki talimatları izleyip sonuç alamadığım için yeni konu açtım . Bilgisayarıma daha yeni ubuntu 12.04 kurdum fakat wireless kablosuz ağına bağlanamıyorum. İki de bir yeniden şifre girmem gereken pencere açılıyor. Konular içerisinde uç birimde yazdığım kod komut sonuçları da burada, aynı zamanda konular arasındaki yöntemleri denerken bana en son sudo şifremi soruyor; girmeye çalışıyorum fakat uç birimde imleç yazmıyor. Bunu anlamış değilim.
                                               En kısa zamanda geri dönüş yaparsanız sevinirim. Teşekkürler, kolay gelsin.

Kod Seç
s@s-Aspire-5520:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS"
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ uname -a
Linux s-Aspire-5520 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686 athlon i386 GNU/Linux
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ lspci
00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2)
00:01.3 Co-processor: NVIDIA Corporation MCP67 Co-processor (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP67 Ethernet (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2)
00:12.0 VGA compatible controller: NVIDIA Corporation C67 [GeForce 7000M / nForce 610M] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:04.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:04.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:04.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
05:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 002: ID 18a5:0302 Verbatim, Ltd
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ rfkill list
0: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ sudo lshw -C network
[sudo] password for s:

heartsmagic

#1
23 Temmuz 2012 - 10:32:48
Uçbirim ve parola meselesi için:
http://forum.ubuntu-tr.net/index.php?topic=2488.0

Diğer çıktıları da görelim lütfen. Ayrıca forumdaki hangi başlıkta anlatılan hangi yönergeleri denediğini, sonucunda neler olduğunu aktarmanda da fayda var.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

galenga

#2
23 Temmuz 2012 - 19:17:35 Son düzenlenme: 23 Temmuz 2012 - 19:22:51 if
Ya tam olarak hatırlıyamıyorum ama genelde benim gibi sorunla karşılaşanların yapmadı gerekenleri uygulamaya çalıştım ama biraz aceleci tavrımdan dolayı hangi konulardı yada ne yaptım hatırlamıyorum . Diğer çıktılar derken neyi kastediyorsunuz acaba? Onlara nasıl ulaşacağımı yazarsanız bende hemen gönderirim.
Yardımlarınız için şimdiden çok teşekkür ederim.

if

#3
23 Temmuz 2012 - 19:23:44
@galenga, diğer çıktılar için: http://forum.ubuntu-tr.net/index.php?topic=28764.0

galenga

#4
23 Temmuz 2012 - 19:33:03
önceki yayınladığım kodlar diğer uç biriminde sizin istediğiniz kodların karşılığı olması lazım idi ama ben yanlış anlamadıysam diğer kodları birlikte yazdım uç birime ve çıkan sonuçlarda burada ;
Kod Seç
s@s-Aspire-5520:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS"
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ uname -a
Linux s-Aspire-5520 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686 athlon i386 GNU/Linux
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ lspci
00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2)
00:01.3 Co-processor: NVIDIA Corporation MCP67 Co-processor (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP67 Ethernet (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2)
00:12.0 VGA compatible controller: NVIDIA Corporation C67 [GeForce 7000M / nForce 610M] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:04.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:04.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:04.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
05:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 002: ID 18a5:0302 Verbatim, Ltd
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ rfkill list
0: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ sudo lshw -C network
[sudo] password for s:



if

#5
23 Temmuz 2012 - 19:36:24
@galenga,
Kod Seç
sudo lshw -C network komutunu verince sizden şifre isteyecek. Şifrenizi yazın ve onaylayın. Görünmüyor şifre diye dert etmeyin.

Bir önceki iletinizdeki çıktı ile aynısını vermişsiniz.
Kod Seç
ifconfig
iwconfig
iwlist scanning
lsmod
dmesg
dmesg | tail çıktılarını da alayım.

Kablosuz kart görünmüyor bilgisayarda. İki tane kablolu bağlantı kartı var.

galenga

#6
23 Temmuz 2012 - 19:50:42
sırayla çıktıları yazıyorum bunların neden bu kadar uzun olduğunu ve içeriklerinin ne anlama geldiğinide bir ara sorunum hallolduğunda açıklarsanız sevinirim arkadaşlar.
Kod Seç
*-network               
       description: Ethernet interface
       product: MCP67 Ethernet
       vendor: NVIDIA Corporation
       physical id: a
       bus info: pci@0000:00:0a.0
       logical name: eth0
       version: a2
       serial: 00:1b:38:6e:62:79
       capacity: 1Gbit/s
       width: 32 bits
       clock: 66MHz
       capabilities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII
       resources: irq:42 memory:f2688000-f2688fff ioport:30f8(size=8) memory:f2689c00-f2689cff memory:f2689800-f268980f
  *-network
       description: Wireless interface
       product: AR242x / AR542x Wireless Network Adapter (PCI-Express)
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:05:00.0
       logical name: wlan0
       version: 01
       serial: 00:1e:4c:62:f2:bd
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath5k driverversion=3.2.0-23-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg
       resources: irq:19 memory:f2200000-f220ffff




bu 1.siydi 2.si baya uzun yanlış yaptığımı sanmaya başladım :D

Kod Seç
2000 mBm)
[ 1789.283107] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1789.283115] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1789.283123] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1789.283132] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1795.272637] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 1795.274569] wlan0: authenticated
[ 1795.275381] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 1795.277955] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 1795.277970] wlan0: associated
[ 1795.294965] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 1795.312607] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1795.312626] cfg80211: Restoring regulatory settings
[ 1795.312650] cfg80211: Calling CRDA to update world regulatory domain
[ 1795.314001] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 1795.327288] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1795.327303] cfg80211: World regulatory domain updated:
[ 1795.327310] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1795.327320] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1795.327328] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1795.327337] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1795.327345] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1795.327353] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1801.311520] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 1801.321231] wlan0: authenticated
[ 1801.322501] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 1801.324830] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 1801.324843] wlan0: associated
[ 1801.343911] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 1801.364633] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1801.364652] cfg80211: Restoring regulatory settings
[ 1801.365030] cfg80211: Calling CRDA to update world regulatory domain
[ 1801.367073] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 1801.380184] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1801.380199] cfg80211: World regulatory domain updated:
[ 1801.380205] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1801.380215] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1801.380224] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1801.380232] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1801.380241] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1801.380249] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1807.366123] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 1807.368128] wlan0: authenticated
[ 1807.369493] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 1807.372009] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 1807.372087] wlan0: associated
[ 1807.386929] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 1807.408427] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1807.408445] cfg80211: Restoring regulatory settings
[ 1807.408501] cfg80211: Calling CRDA to update world regulatory domain
[ 1807.409032] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 1807.426056] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1807.426072] cfg80211: World regulatory domain updated:
[ 1807.426078] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1807.426088] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1807.426097] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1807.426105] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1807.426113] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1807.426121] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1813.409201] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 1813.412928] wlan0: authenticated
[ 1813.413997] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 1813.416529] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 1813.416542] wlan0: associated
[ 1813.431577] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 1813.448747] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1813.448765] cfg80211: Restoring regulatory settings
[ 1813.449152] cfg80211: Calling CRDA to update world regulatory domain
[ 1813.449690] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 1813.473499] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1813.473518] cfg80211: World regulatory domain updated:
[ 1813.473524] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1813.473534] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1813.473543] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1813.473551] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1813.473559] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1813.473567] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1819.448523] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 1819.450837] wlan0: authenticated
[ 1819.451437] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 1819.453749] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 1819.453761] wlan0: associated
[ 1819.475672] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 1819.488650] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1819.488669] cfg80211: Restoring regulatory settings
[ 1819.489051] cfg80211: Calling CRDA to update world regulatory domain
[ 1819.489588] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 1819.507593] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1819.507609] cfg80211: World regulatory domain updated:
[ 1819.507615] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1819.507625] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1819.507633] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1819.507642] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1819.507650] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1819.507658] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1825.488523] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 1825.492250] wlan0: authenticated
[ 1825.493528] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 1825.498297] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 1825.498320] wlan0: associated
[ 1825.533664] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 1825.560539] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1825.560559] cfg80211: Restoring regulatory settings
[ 1825.560623] cfg80211: Calling CRDA to update world regulatory domain
[ 1825.561085] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 1825.576497] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1825.576512] cfg80211: World regulatory domain updated:
[ 1825.576518] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1825.576528] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1825.576536] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1825.576545] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1825.576553] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1825.576561] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2127.008059] usb 2-2: new high-speed USB device number 3 using ehci_hcd
[ 2127.146159] scsi7 : usb-storage 2-2:1.0
[ 2128.238746] scsi 7:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[ 2128.242003] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 2128.857413] sd 7:0:0:0: [sdb] 15653376 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 2128.858642] sd 7:0:0:0: [sdb] Write Protect is off
[ 2128.858653] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2128.859635] sd 7:0:0:0: [sdb] No Caching mode page present
[ 2128.859645] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2128.866638] sd 7:0:0:0: [sdb] No Caching mode page present
[ 2128.866651] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2128.880807]  sdb: sdb1
[ 2128.887693] sd 7:0:0:0: [sdb] No Caching mode page present
[ 2128.887709] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 2128.887720] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2131.731778] CE: hpet increased min_delta_ns to 17280 nsec
[ 2220.085231] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2220.087493] wlan0: authenticated
[ 2220.088904] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2220.091287] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2220.091302] wlan0: associated
[ 2220.108857] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2220.116273] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2220.116287] cfg80211: Restoring regulatory settings
[ 2220.116334] cfg80211: Calling CRDA to update world regulatory domain
[ 2220.117019] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2220.131576] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2220.131591] cfg80211: World regulatory domain updated:
[ 2220.131597] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2220.131607] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2220.131615] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2220.131624] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2220.131632] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2220.131640] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2226.113590] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2226.115455] wlan0: authenticated
[ 2226.116680] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2226.119409] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2226.119423] wlan0: associated
[ 2226.135110] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2226.148980] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2226.149005] cfg80211: Restoring regulatory settings
[ 2226.149047] cfg80211: Calling CRDA to update world regulatory domain
[ 2226.150243] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2226.165414] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2226.165434] cfg80211: World regulatory domain updated:
[ 2226.165441] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2226.165451] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2226.165460] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2226.165468] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2226.165476] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2226.165484] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2232.151710] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2232.153478] wlan0: authenticated
[ 2232.154341] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2232.156630] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2232.156638] wlan0: associated
[ 2232.170157] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2232.188123] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2232.188132] cfg80211: Restoring regulatory settings
[ 2232.188164] cfg80211: Calling CRDA to update world regulatory domain
[ 2232.188491] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2232.195792] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2232.195800] cfg80211: World regulatory domain updated:
[ 2232.195803] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2232.195807] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2232.195811] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2232.195815] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2232.195818] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2232.195822] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2238.185062] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2238.187812] wlan0: authenticated
[ 2238.188388] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2238.191352] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2238.191358] wlan0: associated
[ 2238.204822] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2238.216392] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2238.216405] cfg80211: Restoring regulatory settings
[ 2238.216422] cfg80211: Calling CRDA to update world regulatory domain
[ 2238.216643] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2238.223645] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2238.223665] cfg80211: World regulatory domain updated:
[ 2238.223668] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2238.223672] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2238.223676] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2238.223680] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2238.223683] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2238.223687] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2244.219032] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2244.230565] wlan0: authenticated
[ 2244.230854] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2244.233147] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2244.233154] wlan0: associated
[ 2244.246882] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2244.260323] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2244.260332] cfg80211: Restoring regulatory settings
[ 2244.260523] cfg80211: Calling CRDA to update world regulatory domain
[ 2244.260775] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2244.266766] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2244.266773] cfg80211: World regulatory domain updated:
[ 2244.266776] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2244.266781] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2244.266784] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2244.266788] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2244.266792] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2244.266795] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2250.260774] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2250.262601] wlan0: authenticated
[ 2250.263627] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2250.265977] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2250.265991] wlan0: associated
[ 2250.281939] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2250.282464] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2250.282477] cfg80211: Restoring regulatory settings
[ 2250.282517] cfg80211: Calling CRDA to update world regulatory domain
[ 2250.283208] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2250.296723] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2250.296739] cfg80211: World regulatory domain updated:
[ 2250.296745] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2250.296756] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2250.296764] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2250.296773] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2250.296781] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2250.296789] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2256.280777] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2256.282578] wlan0: authenticated
[ 2256.283559] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2256.287075] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2256.287089] wlan0: associated
[ 2256.301050] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2256.316875] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2256.316895] cfg80211: Restoring regulatory settings
[ 2256.316910] cfg80211: Calling CRDA to update world regulatory domain
[ 2256.317172] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2256.324693] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2256.324700] cfg80211: World regulatory domain updated:
[ 2256.324702] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2256.324707] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2256.324711] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2256.324714] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2256.324718] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2256.324722] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2262.325394] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2262.327737] wlan0: authenticated
[ 2262.328451] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2262.333136] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2262.333152] wlan0: associated
[ 2262.345629] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2262.360470] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2262.360495] cfg80211: Restoring regulatory settings
[ 2262.360586] cfg80211: Calling CRDA to update world regulatory domain
[ 2262.361425] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2262.382624] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2262.382638] cfg80211: World regulatory domain updated:
[ 2262.382644] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2262.382654] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2262.382663] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2262.382671] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2262.382679] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2262.382687] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2268.358679] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2268.360767] wlan0: authenticated
[ 2268.361589] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2268.363936] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2268.363950] wlan0: associated
[ 2268.381247] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2268.396312] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2268.396331] cfg80211: Restoring regulatory settings
[ 2268.396398] cfg80211: Calling CRDA to update world regulatory domain
[ 2268.397087] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2268.410420] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2268.410436] cfg80211: World regulatory domain updated:
[ 2268.410442] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2268.410452] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2268.410460] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2268.410468] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2268.410477] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2268.410485] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2274.398363] wlan0: authenticate with 18:28:61:17:7f:d0 (try 1)
[ 2274.400170] wlan0: authenticated
[ 2274.401354] wlan0: associate with 18:28:61:17:7f:d0 (try 1)
[ 2274.404971] wlan0: RX ReassocResp from 18:28:61:17:7f:d0 (capab=0x411 status=0 aid=2)
[ 2274.404984] wlan0: associated
[ 2274.419322] wlan0: disassociating from 18:28:61:17:7f:d0 by local choice (reason=17)
[ 2274.440977] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2274.440995] cfg80211: Restoring regulatory settings
[ 2274.441387] cfg80211: Calling CRDA to update world regulatory domain
[ 2274.443392] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2274.457929] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2274.457937] cfg80211: World regulatory domain updated:
[ 2274.457940] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2274.457945] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2274.457948] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2274.457952] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2274.457956] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2274.457960] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
s@s-Aspire-5520:~$
s@s-Aspire-5520:~$ dmesg | tail
[ 2274.441387] cfg80211: Calling CRDA to update world regulatory domain
[ 2274.443392] wlan0: deauthenticating from 18:28:61:17:7f:d0 by local choice (reason=3)
[ 2274.457929] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2274.457937] cfg80211: World regulatory domain updated:
[ 2274.457940] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2274.457945] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2274.457948] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2274.457952] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2274.457956] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2274.457960] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)



 


herşey için tekrar tekrar teşekkürler arkadaşlar .

if

#7
23 Temmuz 2012 - 20:15:34
@galenga,
Kod Seç
lsmod çıktısını da görebilir miyim?

galenga

#8
23 Temmuz 2012 - 20:20:54
 mazur görün biraz şey gibi oldu - nedir durumu doktor bey yaşıyacak mı  :D
ama ilgi ve alakanız için çok teşekkür ederim özelillikle hızlı cevablarınızdan dolayı müteşekkirirm .

Kod Seç
Module                  Size  Used by
nls_iso8859_1          12617  1
nls_cp437              12751  1
vfat                   17308  1
fat                    55605  1 vfat
usb_storage            39646  1
uas                    17699  0
snd_hda_codec_realtek   174055  1
joydev                 17393  0
snd_hda_intel          32765  5
snd_hda_codec         109562  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80845  3 snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0
snd_rawmidi            25424  1 snd_seq_midi
arc4                   12473  2
nouveau               712294  3
snd_seq_midi_event     14475  1 snd_seq_midi
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
snd_timer              28931  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
r852                   17901  0
ath5k                 145127  0
psmouse                72846  0
ath                    19387  1 ath5k
serio_raw              13027  0
ttm                    65344  1 nouveau
mac80211              436455  1 ath5k
r592                   17808  0
sm_common              16737  1 r852
nand                   49667  2 r852,sm_common
nand_ids                8547  1 nand
mtd                    35584  2 sm_common,nand
nand_bch               13003  1 nand
bch                    21757  1 nand_bch
nand_ecc               13070  1 nand
k8temp                 12905  0
drm_kms_helper         45466  1 nouveau
drm                   197692  5 nouveau,ttm,drm_kms_helper
cfg80211              178679  3 ath5k,ath,mac80211
usbhid                 41906  0
snd                    62064  18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
hid                    77367  1 usbhid
i2c_algo_bit           13199  1 nouveau
memstick               15857  1 r592
parport_pc             32114  0
rfcomm                 38139  0
bnep                   17830  2
ppdev                  12849  0
mxm_wmi                12859  1 nouveau
soundcore              14635  1 snd
bluetooth             158438  10 rfcomm,bnep
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
i2c_nforce2            12906  0
acer_wmi               23612  0
sparse_keymap          13658  1 acer_wmi
ir_lirc_codec          12739  0
lirc_dev               18700  1 ir_lirc_codec
ir_mce_kbd_decoder     12681  0
ir_sony_decoder        12462  0
ir_jvc_decoder         12459  0
ir_rc6_decoder         12459  0
ir_rc5_decoder         12459  0
rc_rc6_mce             12454  0
ir_nec_decoder         12459  0
mac_hid                13077  0
ene_ir                 18019  0
rc_core                21263  10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir
wmi                    18744  2 mxm_wmi,acer_wmi
video                  19068  1 nouveau
lp                     17455  0
parport                40930  3 parport_pc,ppdev,lp
firewire_ohci          40172  0
firewire_core          56906  1 firewire_ohci
sdhci_pci              18324  0
crc_itu_t              12627  1 firewire_core
sdhci                  28241  1 sdhci_pci
forcedeth              58096  0
pata_amd               13750  0

if

#9
23 Temmuz 2012 - 20:45:02
@galenga, çalıştırırız inşallah.

Kod Seç
gksu gedit /etc/modprobe.d/blacklist.conf komut ile bir belge açılacak. Belgenin içine
Kod Seç
blacklist acer_wmi yazın; kaydedin ve kapatın belgeyi. Bilgisayarı yeniden başlatınca bağlanabiliyor musunuz?

galenga

#10
23 Temmuz 2012 - 21:12:24 Son düzenlenme: 23 Temmuz 2012 - 21:19:06 galenga
hocam en baştaki komutu yaıyorum fakat sadece bir şifre girmem gerektiği bir pencere açılıyor :d ben her ihtimale karşı 2. kodu yazdım ama kabul etmedi galiba bu doğal bişey çünkü yazmam gerekiyordu değil mi ?  :D


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 23 Temmuz 2012 - 21:19:06

şimdi çaktı kalın kafam oraya normal lşifre girmem gerekliydi girdim sonradan dediklerinizide yaptım fakat yinede bağlanmıyor modeme ve yine şifre gir penceresi çıkyor bilmiyorum ama bu ndiswrapper ile atheros sürücü yüklesem olurmu acaba.

if

#11
23 Temmuz 2012 - 21:35:03
Kod Seç
cat /etc/modprobe.d/blacklist.conf | grep acer_wmine diyor?

Kod Seç
echo "options ath5k nohwcrypt=1" | sudo tee /etc/modprobe.d/ath5k.conf komutunu uygulayıp baştan başlatınca durum nedir?

galenga

#12
23 Temmuz 2012 - 21:50:56
ilk komutta blacklist acer_wmi yazısı çıktı fakat 2. komutunu da denedim ama olmadı .

if

#13
23 Temmuz 2012 - 22:04:26
@galenga, iletilerinizde yazım kurallarına uyarsanız memnun olurum.

Komutların çıktılarını lütfen buraya geçin.

Kod Seç
cat /sys/module/pcie_aspm/parameters/policy ne diyor?

galenga

#14
23 Temmuz 2012 - 22:17:32 Son düzenlenme: 23 Temmuz 2012 - 22:23:04 if
kusura bakmayın eşşekliğime verin takdir edersinizki biraz yoğunum o yüzden hızlı yazmak zorunda kaldım insanoğlu arada sırada kalıyor böyle durumlarda ;
Kod Seç
cat /sys/module/pcie_aspm/parameters/policy

kodunu girdiğimde;
Kod Seç

default performance powersave

yazısı çıkıyor.

if

#15
23 Temmuz 2012 - 22:22:48
Estağfirullah, o nasıl laf.

Buradaki[1] konunun "1.2. Kurulu işletim sistemini çekirdek parametreleriyle paşlatmak" başlığından faydalanarak çekirdeği pcie_aspm=force parametresiyle başlatınca durum nedir?

Araştırmalarında bu modülün 3 serisi çekirdekle anlaşamadığına denk geldim. Çıkış yolu bulamazsak üst seriden bir çekirdek kullanırız. Bir de şifrelemeyi WPA ise WEB yapıp dener misiniz?

[1] http://forum.ubuntu-tr.net/index.php?topic=31554.0

galenga

#16
23 Temmuz 2012 - 22:34:38
yardımlarınız için çok teşekkürler fakat daha başta çuvalladım grup ekranındayken e'ye bas yazmışsınız grub ekranı tam olarak neresi oluyor wpa yada wep farketmiyor hiç bir şifreleme türünde bağlanmıyor.

if

#17
23 Temmuz 2012 - 22:38:15
@galenga, bilgisayarı açınca BIOS yazısından sonra karşınıza gelen ilk ekran. Ubuntu, Linux 3.2-16 gibi satırlar olur. Eğer böyle bir ekran gelmiyorsa BIOS yazısından sonra SHIFT tuşuna basılı tutarak açabilirsiniz.

galenga

#18
23 Temmuz 2012 - 22:39:31
fakat bende bıos yazısı da gelmiyor açılırken direk shift ile açılırmı acaba.

if

#19
23 Temmuz 2012 - 22:43:17
Açılır sanırım.

galenga

#20
23 Temmuz 2012 - 22:46:23
açılmadı ayrıca 2 veya 3 dafadır terkardan başlattığımda bilgisayarı ekrana hiç görüntü gelmiyor güç düğmesinden zorunlu kapatıp açtığımda geliyor acaba :D ubuntu ağır mı geldi benim makineye :D .

if

#21
23 Temmuz 2012 - 22:50:42
@galenga, ekrana görüntü gelmiyor derken masaüstüne mi düşemiyorsunuz?

galenga

#22
23 Temmuz 2012 - 22:56:17 Son düzenlenme: 23 Temmuz 2012 - 23:11:00 galenga
evet şimdi bilgisayarı yeniden başlat diyorum shutdown diyerek sonra açılıştaki ubuntu yazısı kapanırken ekranın sadece sol üst köşesine sıkışıp kalmış şekilde kapanıyor ve sonra kendince açılıyor ama ekrana siyah renk dahi gelmemiş şekilde kala kalıyor sonra zorla kapatmak zorunda kalıyorum.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 23 Temmuz 2012 - 23:11:00

    hocam arkadaş başımın etini yedi dırdırıyla yarın devam edelim isterseniz sizi de yormayalım ,  yine teşekkürler herşey için .

if

#23
23 Temmuz 2012 - 23:16:32
@galenga, bilgisayar başlarken ESC'ye basınca geliyor mu grub ekranı?

galenga

#24
24 Temmuz 2012 - 11:44:08 Son düzenlenme: 24 Temmuz 2012 - 13:08:43 galenga
hayır gelmiyor grub ekranını hiç göremedim şu ana kadar.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 24 Temmuz 2012 - 13:08:43

grub u tekrar kurmak için http://forum.ubuntu-tr.net/index.php/topic,192.0.html konudaki adımları izlemeye karar verdim fakat

sudo grub     olan ilk komutta

sudo: grub: command not found               yazıyor gerisine devam edemedim.
Yazdır
Yukarı git Sayfa1 2
Kullanıcı Eylemleri