Gönderen Konu: [Çözüldü] Macbook Pro kablosuz sorunu  (Okunma sayısı 2193 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

« : »
Ubuntu Macbook pro wireless ı görmüyor.

Çıktılar şu şekilde

cat /etc/lsb-release
Kod: [Seç]
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS"

uname -a

Kod: [Seç]
Linux linux-MacBookPro 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

Kod: [Seç]
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Universal Host Controller #5 (rev 05)
00:1a.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Universal Host Controller #1 (rev 05)
00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe (rev 10)
02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)
03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02)
04:00.0 FireWire (IEEE 1394): LSI Corporation FW643 PCI Express 1394b Controller (PHY/Link) (rev 08)

Kod: [Seç]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp.
Bus 001 Device 003: ID 05ac:8509 Apple, Inc. FaceTime HD Camera
Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp.
Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 005: ID 05ac:0253 Apple, Inc. Internal Keyboard/Trackpad (ISO)
Bus 002 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in]
Bus 001 Device 008: ID 05ac:821a Apple, Inc. Bluetooth Host Controller

Kod: [Seç]
rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

Kod: [Seç]
sudo lshw -C network
  -network               
       açıklama: Eternet interface
       ürün: NetXtreme BCM57765 Gigabit Ethernet PCIe
       üretici: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: eth0
       sürüm: 10
       serial: 3c:07:54:61:44:bc
       boyut: 100Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi msix pciexpress bus_master cap_list eternet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=57765-v1.37 ip=192.168.1.112 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       kaynaklar: irq:16 bellek:b0400000-b040ffff bellek:b0410000-b041ffff
  *-network
       açıklama: Network controller
       ürün: BCM4331 802.11a/b/g/n
       üretici: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       sürüm: 02
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list
       yapılandırma: driver=bcma-pci-bridge latency=0
       kaynaklar: irq:17 bellek:b0600000-b0603fff
  *-network ETKİSİZLEŞTİRİLDİ
       açıklama: Kablosuz arayüz
       physical id: 2
       mantıksal ad: wlan0
       serial: 68:a8:6d:34:b5:5e
       kapasiteler: eternet physical wireless
       yapılandırma: broadcast=yes driver=b43 driverversion=3.2.0-26-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg

Kod: [Seç]
ifconfig
eth0      Link encap:Ethernet  HWaddr 3c:07:54:61:44:bc 
          inet addr:192.168.1.112  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::3e07:54ff:fe61:44bc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:90360 errors:0 dropped:0 overruns:0 frame:0
          TX packets:62623 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:126287886 (126.2 MB)  TX bytes:6394596 (6.3 MB)
          Interrupt:16

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2073 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2073 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:283108 (283.1 KB)  TX bytes:283108 (283.1 KB)

Kod: [Seç]
iwconfig
lo        no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
         
eth0      no wireless extensions.


Kod: [Seç]
iwlist scanning
lo        Interface doesn't support scanning.

wlan0     Failed to read scan data : Network is down

eth0      Interface doesn't support scanning.


Kod: [Seç]
lsmod
Module                  Size  Used by
hid_magicmouse         17938  0
hidp                   22628  1
rfcomm                 47604  12
bnep                   18281  2
parport_pc             32866  0
ppdev                  17113  0
arc4                   12529  2
b43                   365785  0
uvcvideo               72627  0
radeon                804372  3
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
btusb                  18288  4
mac80211              506816  1 b43
bcm5974                17399  0
bluetooth             180104  28 hidp,rfcomm,bnep,btusb
joydev                 17693  0
snd_hda_codec_hdmi     32474  1
ttm                    76949  1 radeon
snd_hda_codec_cirrus    24002  1
applesmc               19554  0
snd_hda_intel          33773  7
cfg80211              205544  2 b43,mac80211
drm_kms_helper         46978  1 radeon
drm                   242038  5 radeon,ttm,drm_kms_helper
apple_gmux             12751  0
video                  19596  1 apple_gmux
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel
ssb                    52752  1 b43
i2c_algo_bit           13423  1 radeon
snd_seq_midi           13324  0
mei                    41616  0
input_polldev          13896  1 applesmc
snd_hwdep              13668  1 snd_hda_codec
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
apple_bl               13673  0
bcma                   26696  1 b43
mac_hid                13253  0
snd_pcm                97188  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              29990  2 snd_pcm,snd_seq
snd                    78855  23 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_seq_device,snd_timer
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
hid_apple              13375  0
tg3                   152032  0
firewire_ohci          41000  0
firewire_core          63558  1 firewire_ohci
usbhid                 47199  0
sdhci_pci              18826  0
hid                    99559  4 hid_magicmouse,hidp,hid_apple,usbhid
sdhci                  33205  1 sdhci_pci
crc_itu_t              12707  1 firewire_core

dmesg
Kod: [Seç]
[    3.138859] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    3.138864] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    3.138879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.138899] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.138943] efifb: dmi detected MacBookPro8,2 - framebuffer at 0x90000000 (1152x864, stride 4608)
[    3.138946] intel_idle: MWAIT substates: 0x21120
[    3.138947] intel_idle: v0.4 model 0x2A
[    3.138948] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.139028] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    3.139063] ACPI: AC Adapter [ADP1] (on-line)
[    3.139160] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    3.139175] ACPI: Lid Switch [LID0]
[    3.139208] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    3.139212] ACPI: Power Button [PWRB]
[    3.139244] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    3.139247] ACPI: Sleep Button [SLPB]
[    3.139277] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.139279] ACPI: Power Button [PWRF]
[    3.147246] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    3.147255] ACPI: Battery Slot [BAT0] (battery present)
[    3.147276] ERST: Table is not found!
[    3.147277] GHES: HEST is not enabled!
[    3.147334] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.302838] ACPI: Battery Slot [BAT0] (battery present)
[    3.349367] Linux agpgart interface v0.103
[    3.350656] brd: module loaded
[    3.351264] loop: module loaded
[    3.351384] ata_piix 0000:00:1f.2: version 2.13
[    3.351396] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.351402] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    3.504870] ata_piix 0000:00:1f.2: setting latency timer to 64
[    3.505094] scsi0 : ata_piix
[    3.505162] scsi1 : ata_piix
[    3.505332] ata1: SATA max UDMA/133 cmd 0x3148 ctl 0x315c bmdma 0x3060 irq 19
[    3.505338] ata2: SATA max UDMA/133 cmd 0x3140 ctl 0x3158 bmdma 0x3068 irq 19
[    3.505606] Fixed MDIO Bus: probed
[    3.505620] tun: Universal TUN/TAP device driver, 1.6
[    3.505622] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.505663] PPP generic driver version 2.4.2
[    3.505745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.505759] ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.505786] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.505789] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.505830] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.505854] ehci_hcd 0000:00:1a.7: debug port 2
[    3.509729] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[    3.509744] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xb0906c00
[    3.524794] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.524941] hub 1-0:1.0: USB hub found
[    3.524945] hub 1-0:1.0: 6 ports detected
[    3.525006] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    3.525020] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.525024] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.525057] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.525078] ehci_hcd 0000:00:1d.7: debug port 2
[    3.528945] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[    3.528957] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xb0906800
[    3.544772] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.544905] hub 2-0:1.0: USB hub found
[    3.544909] hub 2-0:1.0: 8 ports detected
[    3.544974] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.544984] uhci_hcd: USB Universal Host Controller Interface driver
[    3.544996] uhci_hcd 0000:00:1a.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    3.545003] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.545006] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.545039] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    3.545071] uhci_hcd 0000:00:1a.0: irq 21, io base 0x00003120
[    3.545163] hub 3-0:1.0: USB hub found
[    3.545167] hub 3-0:1.0: 2 ports detected
[    3.545214] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.545221] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.545224] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.545261] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    3.545284] uhci_hcd 0000:00:1d.0: irq 19, io base 0x000030c0
[    3.545376] hub 4-0:1.0: USB hub found
[    3.545379] hub 4-0:1.0: 2 ports detected
[    3.545457] usbcore: registered new interface driver libusual
[    3.545485] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.546359] i8042: No controller found
[    3.546411] mousedev: PS/2 mouse device common for all mice
[    3.546555] rtc_cmos 00:06: RTC can wake from S4
[    3.546650] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    3.546678] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.546738] device-mapper: uevent: version 1.0.3
[    3.546789] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.546985] cpuidle: using governor ladder
[    3.547291] cpuidle: using governor menu
[    3.547293] EFI Variables Facility v0.08 2004-May-17
[    3.547456] TCP cubic registered
[    3.547538] NET: Registered protocol family 10
[    3.547874] NET: Registered protocol family 17
[    3.547877] Registering the dns_resolver key type
[    3.547981] PM: Hibernation image not present or could not be loaded.
[    3.547990] registered taskstats version 1
[    3.559712]   Magic number: 4:962:333
[    3.559738] tty tty54: hash matches
[    3.559832] rtc_cmos 00:06: setting system clock to 2012-07-16 14:20:06 UTC (1342448406)
[    3.561253] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.561254] EDD information not available.
[    3.836553] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    3.969305] hub 1-1:1.0: USB hub found
[    3.969477] hub 1-1:1.0: 3 ports detected
[    4.080291] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    4.096246] Refined TSC clocksource calibration: 2195.014 MHz.
[    4.096260] Switching to clocksource tsc
[    4.340008] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    4.472752] hub 2-1:1.0: USB hub found
[    4.472916] hub 2-1:1.0: 2 ports detected
[    4.559961] usb 1-1.1: new full-speed USB device number 4 using ehci_hcd
[    4.654302] hub 1-1.1:1.0: USB hub found
[    4.654630] hub 1-1.1:1.0: 3 ports detected
[    4.727778] usb 1-1.2: new full-speed USB device number 5 using ehci_hcd
[    4.851396] ata1.01: failed to resume link (SControl 0)
[    4.851495] ata2.01: failed to resume link (SControl 0)
[    4.915575] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
[    5.007299] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.007323] ata2.01: SATA link down (SStatus 0 SControl 0)
[    5.007335] ata2.01: link offline, clearing class 3 to NONE
[    5.007458] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.007471] ata1.01: SATA link down (SStatus 0 SControl 0)
[    5.015654] ata2.00: ATAPI: MATSHITADVD-R   UJ-8A8, HB14, max UDMA/100
[    5.031477] ata2.00: configured for UDMA/100
[    5.062141] ata1.00: ATA-8: ST9500325ASG, 0009APM1, max UDMA/133
[    5.062157] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    5.075915] ata1.00: configured for UDMA/133
[    5.076045] scsi 0:0:0:0: Direct-Access     ATA      ST9500325ASG     0009 PQ: 0 ANSI: 5
[    5.076235] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    5.076249] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.076483] sd 0:0:0:0: [sda] Write Protect is off
[    5.076494] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.076604] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.079458] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-8A8   HB14 PQ: 0 ANSI: 5
[    5.082944] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    5.082953] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.083175] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.083287] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.103362] usb 1-1.1.1: new full-speed USB device number 6 using ehci_hcd
[    5.115171]  sda: sda1 sda2 sda3 sda4 sda5
[    5.116198] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.117321] Freeing unused kernel memory: 920k freed
[    5.117407] Write protecting the kernel read-only data: 12288k
[    5.121359] Freeing unused kernel memory: 1616k freed
[    5.124313] Freeing unused kernel memory: 1200k freed
[    5.137491] udevd[119]: starting version 175
[    5.194088] sdhci: Secure Digital Host Controller Interface driver
[    5.194091] sdhci: Copyright(c) Pierre Ossman
[    5.194399] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[    5.194451] sdhci-pci 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.194454] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems.
[    5.194542] sdhci-pci 0000:02:00.1: setting latency timer to 64
[    5.194569] mmc0: no vmmc regulator found
[    5.194632] Registered led device: mmc0::
[    5.194970] usbcore: registered new interface driver usbhid
[    5.194973] usbhid: USB HID core driver
[    5.195739] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
[    5.196660] firewire_ohci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.196669] firewire_ohci 0000:04:00.0: setting latency timer to 64
[    5.197632] tg3.c:v3.121 (November 2, 2011)
[    5.197673] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.197715] tg3 0000:02:00.0: setting latency timer to 64
[    5.203566] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input4
[    5.203716] generic-usb 0003:05AC:820A.0004: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1a.7-1.1.1/input0
[    5.208011] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[    5.208331] apple 0003:05AC:0253.0001: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input0
[    5.211337] apple 0003:05AC:0253.0002: hidraw2: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input1
[    5.215176] apple 0003:05AC:8242.0003: hiddev0,hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.7-1.1/input0
[    5.216664] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM957765) rev 57785100] (PCI Express) MAC address 3c:07:54:61:44:bc
[    5.216667] tg3 0000:02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    5.216669] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    5.216671] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    5.251003] firewire_ohci 0000:04:00.0: irq 45 for MSI/MSI-X
[    5.251048] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0
[    5.279047] usb 1-1.1.2: new full-speed USB device number 7 using ehci_hcd
[    5.383313] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input6
[    5.383396] generic-usb 0003:05AC:820B.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1a.7-1.1.2/input0
[    5.455290] usb 1-1.1.3: new full-speed USB device number 8 using ehci_hcd
[    5.750533] firewire_core: created device fw0: GUID a4b197fffef37374, S800
[    5.750540] firewire_core: phy config: card 0, new root=ffc0, gap_count=63
[    5.863793] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    9.188527] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.558923] udevd[492]: starting version 175
[   10.361861] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[   10.778826] lp: driver loaded but no devices found
[   11.115980] bcma-pci-bridge 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.115993] bcma-pci-bridge 0000:03:00.0: setting latency timer to 64
[   11.116054] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[   11.116082] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
[   11.116144] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
[   11.116286] bcma: PMU resource config unknown for device 0x4331
[   11.184687] bcma: Bus registered
[   11.327488] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   11.327734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.327740] mei 0000:00:16.0: setting latency timer to 64
[   11.327801] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[   11.504483] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[   11.505196] acpi device:03: registered as cooling_device8
[   11.505226] ACPI Error: Evaluating _BCM failed (20110623/video-372)
[   11.505278] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input7
[   11.505328] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.548634] apple_gmux: Found gmux version 1.9.35
[   11.558804] [drm] Initialized drm 1.1.0 20060810
[   11.582789] cfg80211: Calling CRDA to update world regulatory domain
[   11.696901] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.696971] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   11.696994] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   11.824010] input: HDA Intel PCH SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.824129] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.824212] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.824475] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   11.824558] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   11.824586] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[   11.900618] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   11.900669] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   11.915563] applesmc: key=441 fan=2 temp=29 acc=1 lux=2 kbd=1
[   11.928655] input: applesmc as /devices/platform/applesmc.768/input/input12
[   11.928730] Registered led device: smc::kbd_backlight
[   12.617368] Bluetooth: Core ver 2.16
[   12.617388] NET: Registered protocol family 31
[   12.617390] Bluetooth: HCI device and connection manager initialized
[   12.617392] Bluetooth: HCI socket layer initialized
[   12.617394] Bluetooth: L2CAP socket layer initialized
[   12.617399] Bluetooth: SCO socket layer initialized
[   12.673159] input: bcm5974 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.2/input/input13
[   12.673241] usbcore: registered new interface driver bcm5974
[   13.056967] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   13.057132] usbcore: registered new interface driver btusb
[   13.105570] usb 1-1.1.1: USB disconnect, device number 6
[   13.114722] Linux video capture interface: v2.00
[   13.270705] [drm] radeon defaulting to kernel modesetting.
[   13.270707] [drm] radeon kernel modesetting enabled.
[   13.270750] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.270755] radeon 0000:01:00.0: setting latency timer to 64
[   13.270900] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x106B:0x00E2).
[   13.270946] [drm] register mmio base: 0xB0800000
[   13.270947] [drm] register mmio size: 131072
[   13.271056] ATOM BIOS: Apple
[   13.271081] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   13.271083] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   13.275529] [drm] Detected VRAM RAM=512M, BAR=256M
[   13.275531] [drm] RAM width 128bits DDR
[   13.275608] [TTM] Zone  kernel: Available graphics memory: 1979166 kiB.
[   13.275609] [TTM] Initializing pool allocator.
[   13.275635] [drm] radeon: 512M of VRAM memory ready
[   13.275636] [drm] radeon: 512M of GTT memory ready.
[   13.275650] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.275651] [drm] Driver supports precise vblank timestamp query.
[   13.275693] radeon 0000:01:00.0: irq 49 for MSI/MSI-X
[   13.275698] radeon 0000:01:00.0: radeon: using MSI.
[   13.275741] [drm] radeon: irq initialized.
[   13.275743] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   13.276048] [drm] Loading TURKS Microcode
[   13.353902] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8509)
[   13.360843] input: FaceTime HD Camera (Built-in) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input14
[   13.360924] usbcore: registered new interface driver uvcvideo
[   13.360926] USB Video Class driver (1.1.1)
[   13.469643] cfg80211: World regulatory domain updated:
[   13.469646] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.469648] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.469650] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.469652] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.469653] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.469655] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.470290] usb 1-1.1.2: USB disconnect, device number 7
[   13.479222] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
[   13.479877] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   13.479880] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479882] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   13.479885] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479887] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   13.479889] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479891] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   13.479894] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479897] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   13.479899] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479901] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   13.479903] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479904] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   13.479906] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479907] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   13.479909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479910] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   13.479912] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479921] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   13.479923] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479924] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   13.479926] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.479927] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   13.479929] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.479930] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   13.479932] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.479934] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   13.479935] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.805382] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.805738] Broadcom 43xx driver loaded [ Features: PNL ]
[   14.714130] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   14.714249] radeon 0000:01:00.0: WB enabled
[   14.730508] [drm] ring test succeeded in 3 usecs
[   14.730588] [drm] radeon: ib pool ready.
[   14.730678] [drm] ib test succeeded in 0 usecs
[   14.731867] [drm] Radeon Display Connectors
[   14.731869] [drm] Connector 0:
[   14.731870] [drm]   LVDS
[   14.731872] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[   14.731873] [drm]   Encoders:
[   14.731874] [drm]     LCD1: INTERNAL_UNIPHY
[   14.731875] [drm] Connector 1:
[   14.731876] [drm]   DisplayPort
[   14.731877] [drm]   HPD1
[   14.731878] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   14.731880] [drm]   Encoders:
[   14.731881] [drm]     DFP1: INTERNAL_UNIPHY1
[   14.731882] [drm] Connector 2:
[   14.731882] [drm]   DisplayPort
[   14.731883] [drm]   HPD2
[   14.731884] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   14.731886] [drm]   Encoders:
[   14.731887] [drm]     DFP2: INTERNAL_UNIPHY1
[   14.731888] [drm] Connector 3:
[   14.731888] [drm]   DisplayPort
[   14.731889] [drm]   HPD3
[   14.731890] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   14.731892] [drm]   Encoders:
[   14.731892] [drm]     DFP3: INTERNAL_UNIPHY2
[   14.731952] [drm] Special thermal controller config
[   14.733051] [drm] radeon: power management initialized
[   14.826725] type=1400 audit(1342448417.775:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=739 comm="apparmor_parser"
[   14.826744] type=1400 audit(1342448417.775:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=614 comm="apparmor_parser"
[   14.826758] type=1400 audit(1342448417.775:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=781 comm="apparmor_parser"
[   14.827005] type=1400 audit(1342448417.775:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=739 comm="apparmor_parser"
[   14.827025] type=1400 audit(1342448417.775:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=614 comm="apparmor_parser"
[   14.827039] type=1400 audit(1342448417.775:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=781 comm="apparmor_parser"
[   14.827164] type=1400 audit(1342448417.775:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=739 comm="apparmor_parser"
[   14.827184] type=1400 audit(1342448417.775:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=614 comm="apparmor_parser"
[   14.827198] type=1400 audit(1342448417.775:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=781 comm="apparmor_parser"
[   15.206977] [drm] fb mappable at 0x90142000
[   15.206980] [drm] vram apper at 0x90000000
[   15.206981] [drm] size 5324800
[   15.206982] [drm] fb depth is 24
[   15.206982] [drm]    pitch is 5888
[   15.207055] fbcon: radeondrmfb (fb0) is primary device
[   15.207116] Console: switching to colour frame buffer device 180x56
[   15.207142] fb0: radeondrmfb frame buffer device
[   15.207143] drm: registered panic notifier
[   15.207149] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[   18.055874] ppdev: user-space parallel port driver
[   18.156161] init: failsafe main process (833) killed by TERM signal
[   19.004522] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.004525] Bluetooth: BNEP filters: protocol multicast
[   19.018066] type=1400 audit(1342448421.971:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=925 comm="apparmor_parser"
[   19.071638] Bluetooth: RFCOMM TTY layer initialized
[   19.071642] Bluetooth: RFCOMM socket layer initialized
[   19.071643] Bluetooth: RFCOMM ver 1.11
[   21.057565] tg3 0000:02:00.0: irq 50 for MSI/MSI-X
[   21.057570] tg3 0000:02:00.0: irq 51 for MSI/MSI-X
[   21.057573] tg3 0000:02:00.0: irq 52 for MSI/MSI-X
[   21.057576] tg3 0000:02:00.0: irq 53 for MSI/MSI-X
[   21.057580] tg3 0000:02:00.0: irq 54 for MSI/MSI-X
[   21.352590] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.353034] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.477334] b43-phy0 ERROR: Firmware file "b43/ucode29_mimo.fw" not found
[   21.477337] b43-phy0 ERROR: Firmware file "b43-open/ucode29_mimo.fw" not found
[   21.477339] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   21.477438] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.726505] audit_printk_skb: 3 callbacks suppressed
[   21.726508] type=1400 audit(1342448424.683:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=989 comm="apparmor_parser"
[   21.726796] type=1400 audit(1342448424.683:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=989 comm="apparmor_parser"
[   21.726956] type=1400 audit(1342448424.683:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=989 comm="apparmor_parser"
[   21.727565] type=1400 audit(1342448424.683:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=993 comm="apparmor_parser"
[   21.727898] type=1400 audit(1342448424.683:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=993 comm="apparmor_parser"
[   21.763512] type=1400 audit(1342448424.719:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=995 comm="apparmor_parser"
[   21.809415] type=1400 audit(1342448424.767:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=988 comm="apparmor_parser"
[   21.810289] type=1400 audit(1342448424.767:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=992 comm="apparmor_parser"
[   21.810651] type=1400 audit(1342448424.767:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=992 comm="apparmor_parser"
[   21.995912] type=1400 audit(1342448424.951:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=990 comm="apparmor_parser"
[   22.913003] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[   22.913006] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[   22.913007] tg3 0000:02:00.0: eth0: EEE is disabled
[   22.913252] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   33.419972] eth0: no IPv6 routers present
[   63.826298] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  103.763624] input: Apple Magic Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/bluetooth/hci0/hci0:12/input15
[  103.763943] magicmouse 0005:05AC:030D.0006: input,hidraw0: BLUETOOTH HID v3.06 Mouse [Apple Magic Mouse] on 68:A8:6D:34:B5:5F

Kod: [Seç]
dmesg | tail
[   21.810651] type=1400 audit(1342448424.767:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=992 comm="apparmor_parser"
[   21.995912] type=1400 audit(1342448424.951:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=990 comm="apparmor_parser"
[   22.913003] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[   22.913006] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[   22.913007] tg3 0000:02:00.0: eth0: EEE is disabled
[   22.913252] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   33.419972] eth0: no IPv6 routers present
[   63.826298] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  103.763624] input: Apple Magic Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/bluetooth/hci0/hci0:12/input15
[  103.763943] magicmouse 0005:05AC:030D.0006: input,hidraw0: BLUETOOTH HID v3.06 Mouse [Apple Magic Mouse] on 68:A8:6D:34:B5:5F
« Son Düzenleme: 16 Temmuz 2012 - 20:39:18 Gönderen: heartsmagic »

« Yanıtla #1 : »
Önce şu paketi indirin ve ev dizininde "bcm" isimli bir klasör oluşturup paket dosyasını olduğu gibi içine kopyalayın.
Kod: [Seç]
sudo apt-get install b43-fwcutter
Ardından:
Kod: [Seç]
cd ~/bcm
tar xf broadcom-wl-5.100.138.tar.bz2
sudo b43-fwcutter -w "/lib/firmware" broadcom-wl-5.100.138/linux/wl_apsta.o
çalıştırıyoruz.
Kod: [Seç]
sudo -i
cp /etc/pm/config.d/default /etc/pm/config.d/default.old
echo 'SUSPEND_MODULES="b43 bcma"' >> /etc/pm/config.d/default
Eğer default dosyası bulunmuyorsa bu dosyayı siz oluşturun ve içine
Kod: [Seç]
SUSPEND_MODULES="b43 bcma"yazıp kaydedin.
Bilgisayarı yeniden başlatın lütfen.Sanırım kullanıma hazır olacaktır.
« Son Düzenleme: 16 Temmuz 2012 - 18:59:27 Gönderen: hckr »

« Yanıtla #2 : »
Hangi paketi indirmeliyim.Herhangi bir bağlantı göremiyorum ?

« Yanıtla #3 : »
Hangi paketi indirmeliyim.Herhangi bir bağlantı göremiyorum ?
Kusura bakmayın eklemeyi unutmuşum şu paketi yazan kısmın üzerine gelince indirecektir.

« Yanıtla #4 : »
Sorun çözülmüştür teşekkürler @hckr