Kablosuz İnternet Yavaşlığı

[EminSargin]

Merhabalar ,
Bir Kaç saat önce bilgisayarım ubuntunun son sürümünü indirip kurdum fakat netim çok yavaştı ..

Bu yüzden Xp yapmak zorunda kaldım önerileriniz nelerdir ZyXEL ve Compaxe wireless kablosuz internet çekicim var şimdiden teşekkürler

İyi Forumlar ...

[OnurK]

ZyXEL ve Compaxe wireless çekicim var şimdiden teşekkürler

İyi Forumlar ...

ZyXEL kablosuz erişim noktanız, Compaxe ise kablosuz adaptörünüz mü ?

DNS değiştirmeyi denediniz mi acaba ?

[burk]

@EminSargin sanırım siz Ubuntu'yu kaldırıp tekara XP'ye geçiş yapmışsınız, doğru mudur?

[EminSargin]

 @Burk evet xp yükledim internete giremediğim için fakat soruma cevap alırsam tekrar ubuntu kurulumunu yapıcağım
@OnurK evet doğrudur.

[Kadir Can]

@EminSargin;
Sanırım gözden kaçırdın.OnurK aynı zamanda DNS değiştirmeyi önermiş.
Benim tavsiyem Google DNS'tir.Bu adreste nasıl değiştirebileceğin yazıyor.
Kolay gelsin.

[empax]

İkinci iletinizde "internete giremediğimden" demişsiniz(?)

Bilgisayarı Ubuntu canlı cd ile açip "lspci" ve "lsusb" komutlarının çıktılarını buraya aktarın. Donanımla alakalı hiç bir şey geçememişsiniz. Biraz daha yardımcı olmanız gerekiyor. 

[bytan]

netim çok yavaştı ..

internete giremediğim için

Tam olarak hangisi bu yaşadığın? Duruma göre çözüm önerileri de farklı olabilir.

Canlı cd ile de internete erişme sorunun oluyor mu? Sorununu inceleyip çözüm bulabilmek için kurulu ubuntuya ihtiyacın var. Aksi durumda burada söylenenler ve istenenleri uygulayıp sonuç alma imkanımız olmaz.

http://forum.ubuntu-tr.net/index.php?topic=28764.0

[EminSargin]

internete bağlanıyordum yavaş oluyor fakat bir müddet sonra internet erişimim tamamen gidiyordu...

Ayriyeten Kendim Driver Kurmadım Driver Cd si var fakat kuramadım
Windows'da indirme hızım 900 kb/s 1,5 mb arası değişiyor


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 08 Temmuz 2012 - 16:34:54
lspci :

Kod Seç Genişlet

00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host brid
lsusb:

Kod Seç Genişlet


Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 005: ID 1058:1023 Western Digital Technologies, Inc.
Bus 001 Device 006: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 002 Device 002: ID 09da:9090 A4 Tech Co., Ltd XL-750BK Laser Mouse
Bus 002 Device 003: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory


[Kadir Can]

@EminSargin;
Sanırım gözden kaçırdın.OnurK aynı zamanda DNS değiştirmeyi önermiş.
Benim tavsiyem Google DNS'tir.Bu adreste nasıl değiştirebileceğin yazıyor.
Kolay gelsin.

Bunu denediniz mi?
Ayrıca Ubuntu'da Windows sürücüleri çalışmaz.Çalıştırmak için sarıcı(wrapper) filan kullanılıyor galiba; ama gerek yok.En kötü ihtimalle Linux Mint deneriz, şimdilik ona da gerek yok.
Çıktılarınızda kablosuz adaptörü olarak Realtek 8187l görünüyor.Bu adreste adaptörünüz için Linux sürücüleri var.Üstadlar önce kestirme yolları denesinler, olmadı sürücüleri kurarız.
Kolay gelsin.

[EminSargin]

merhabalar önerdiğiniz yöntemleri denedim fakat sonuç alamadım

[empax]

merhabalar önerdiğiniz yöntemleri denedim fakat sonuç alamadım

DNS değiştirmeyi mi denediniz ? Dns değiştirdikten sonra kurulu Ubuntu'yu yeniden başlatmanız gerekiyor.

[bytan]

@EminSargin,

Şu an makinanda kurulu ubuntu var mı? Yukarıda da sorulduğu üzere, canlı cd ile internet durumun ne? Yine kurulu sistemde yukarıda verdiğim bağlantıdaki çıktılar nedir?

[EminSargin]

Evet Ubuntuyu Silmemek Üzere Tekrarar Yükledim istediğiniz çıktılar :

cat /etc/lsb-release:

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.10
DISTRIB_CODENAME=oneiric
DISTRIB_DESCRIPTION="Ubuntu 11.10"

uname -a:

Kod Seç Genişlet

Linux emin-System-Product-Name 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 athlon i386 GNU/Linux

lespci:

Kod Seç Genişlet

00:00.0 RAM memory: nVidia Corporation MCP61 LPC Bridge (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
02:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1)

lsusb:

Kod Seç Genişlet

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 005: ID 1058:1023 Western Digital Technologies, Inc.
Bus 001 Device 006: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 002 Device 002: ID 09da:9090 A4 Tech Co., Ltd XL-750BK Laser Mouse
Bus 002 Device 003: ID 1c4f:0002 SiGma Micro

rfkill list:

Kod Seç Genişlet

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

sudo lshw -C network:

Kod Seç Genişlet

  *-network               
       description: Wireless interface
       physical id: 1
       bus info: usb@1:4
       logical name: wlan0
       serial: 00:e0:0c:e0:de:75
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8187 driverversion=3.0.0-12-generic firmware=N/A ip=192.168.1.34 link=yes multicast=yes wireless=IEEE 802.11bg
ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 20:cf:30:eb:10:42 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:43 Base address:0x6000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:480 (480.0 B)  TX bytes:480 (480.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:e0:0c:e0:de:75 
          inet addr:192.168.1.34  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::2e0:cff:fee0:de75/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:789 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1273 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:371603 (371.6 KB)  TX bytes:375118 (375.1 KB)


iwconfig:

Kod Seç Genişlet

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:"ZyXEL" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: 40:4A:03:7F:94:4E   
          Bit Rate=48 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=49/70  Signal level=-61 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:352  Invalid misc:261   Missed beacon:0



iwlist scanning:

Kod Seç Genişlet

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 40:4A:03:7F:94:4E
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=47/70  Signal level=-63 dBm 
                    Encryption key:on
                    ESSID:"ZyXEL"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000297bfdf596
                    Extra: Last beacon: 98172ms ago
                    IE: Unknown: 00055A7958454C
                    IE: Unknown: 010882848B0C12961824
                    IE: Unknown: 030106
                    IE: Unknown: 0706545220010D14
                    IE: Unknown: 200100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C

lsmod:

Kod Seç Genişlet

Module                  Size  Used by
joydev                 17393  0
bnep                   17923  2
rfcomm                 38408  0
bluetooth             148839  10 bnep,rfcomm
snd_hda_codec_via      61329  1
binfmt_misc            17292  1
arc4                   12473  2
snd_hda_intel          24262  2
snd_hda_codec          91754  2 snd_hda_codec_via,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80468  2 snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0
snd_rawmidi            25241  1 snd_seq_midi
snd_seq_midi_event     14475  1 snd_seq_midi
ppdev                  12849  0
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
rtl8187                56323  0
mac80211              272785  1 rtl8187
psmouse                73673  0
cfg80211              172392  2 rtl8187,mac80211
asus_atk0110           17742  0
eeprom_93cx6           12653  1 rtl8187
k10temp                12990  0
parport_pc             32114  1
serio_raw              12990  0
usbhid                 41905  0
hid                    77367  1 usbhid
nouveau               663211  3
ttm                    65224  1 nouveau
drm_kms_helper         32889  1 nouveau
drm                   192226  5 nouveau,ttm,drm_kms_helper
snd_timer              28932  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_algo_bit           13199  1 nouveau
mxm_wmi                12859  1 nouveau
wmi                    18744  1 mxm_wmi
video                  18908  1 nouveau
snd                    55902  13 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              12600  1 snd
snd_page_alloc         14115  2 snd_hda_intel,snd_pcm
i2c_nforce2            12906  0
lp                     17455  0
parport                40930  3 ppdev,parport_pc,lp
ums_realtek            13096  0
usb_storage            44173  2 ums_realtek
uas                    17699  0
pata_amd               13753  0
sata_nv                23379  2
forcedeth              58103  0

dmesg:

Kod Seç Genişlet

[    0.872486] pci 0000:02:00.0: Boot video device
[    0.872488] PCI: CLS 64 bytes, default 64
[    0.872716] audit: initializing netlink socket (disabled)
[    0.872723] type=2000 audit(1341770337.868:1): initialized
[    0.877504] Freeing initrd memory: 13304k freed
[    0.890416] highmem bounce pool size: 64 pages
[    0.890421] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.898902] VFS: Disk quotas dquot_6.5.2
[    0.898957] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.899457] fuse init (API version 7.16)
[    0.899545] msgmni has been set to 1682
[    0.899920] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.899947] io scheduler noop registered
[    0.899950] io scheduler deadline registered
[    0.899974] io scheduler cfq registered (default)
[    0.900068] pcieport 0000:00:09.0: setting latency timer to 64
[    0.900092] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.900122] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.900137] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.900160] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.900176] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.900213] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.900230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.900316] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.900320] ACPI: Power Button [PWRB]
[    0.900349] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.900351] ACPI: Power Button [PWRF]
[    0.900371] ACPI: acpi_idle registered with cpuidle
[    0.902078] ERST: Table is not found!
[    0.902129] isapnp: Scanning for PnP cards...
[    0.902144] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.922469] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.255773] isapnp: No Plug & Play device found
[    1.300788] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.301070] Linux agpgart interface v0.103
[    1.301951] brd: module loaded
[    1.302298] loop: module loaded
[    1.302418] pata_acpi 0000:00:06.0: setting latency timer to 64
[    1.302545] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    1.302558] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.302567] pata_acpi 0000:00:08.0: setting latency timer to 64
[    1.302572] pata_acpi 0000:00:08.0: PCI INT A disabled
[    1.302676] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[    1.302684] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[    1.302693] pata_acpi 0000:00:08.1: setting latency timer to 64
[    1.302697] pata_acpi 0000:00:08.1: PCI INT B disabled
[    1.302902] Fixed MDIO Bus: probed
[    1.302917] PPP generic driver version 2.4.2
[    1.302940] tun: Universal TUN/TAP device driver, 1.6
[    1.302942] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.302994] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.303097] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[    1.303106] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[    1.303112] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    1.303114] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    1.303136] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.303150] ehci_hcd 0000:00:02.1: debug port 1
[    1.303156] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    1.303172] ehci_hcd 0000:00:02.1: irq 21, io mem 0xdbffac00
[    1.312041] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.312160] hub 1-0:1.0: USB hub found
[    1.312163] hub 1-0:1.0: 10 ports detected
[    1.312218] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.312353] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[    1.312367] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[    1.312378] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    1.312381] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    1.312407] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.312430] ohci_hcd 0000:00:02.0: irq 20, io mem 0xdbffb000
[    1.370132] hub 2-0:1.0: USB hub found
[    1.370137] hub 2-0:1.0: 10 ports detected
[    1.370189] uhci_hcd: USB Universal Host Controller Interface driver
[    1.370248] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.370690] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.370698] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.370806] mousedev: PS/2 mouse device common for all mice
[    1.370890] rtc_cmos 00:02: RTC can wake from S4
[    1.370989] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.371023] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.371098] device-mapper: uevent: version 1.0.3
[    1.371142] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.371164] EISA: Probing bus 0 at eisa.0
[    1.371166] EISA: Cannot allocate resource for mainboard
[    1.371168] Cannot allocate resource for EISA slot 1
[    1.371169] Cannot allocate resource for EISA slot 2
[    1.371170] Cannot allocate resource for EISA slot 3
[    1.371171] Cannot allocate resource for EISA slot 4
[    1.371173] Cannot allocate resource for EISA slot 5
[    1.371174] Cannot allocate resource for EISA slot 6
[    1.371175] Cannot allocate resource for EISA slot 7
[    1.371176] Cannot allocate resource for EISA slot 8
[    1.371177] EISA: Detected 0 cards.
[    1.371184] cpufreq-nforce2: No nForce2 chipset.
[    1.371186] cpuidle: using governor ladder
[    1.371187] cpuidle: using governor menu
[    1.371188] EFI Variables Facility v0.08 2004-May-17
[    1.371361] TCP cubic registered
[    1.371447] NET: Registered protocol family 10
[    1.371823] NET: Registered protocol family 17
[    1.371834] Registering the dns_resolver key type
[    1.371857] Using IPI No-Shortcut mode
[    1.371902] PM: Hibernation image not present or could not be loaded.
[    1.371909] registered taskstats version 1
[    1.379696]   Magic number: 4:851:996
[    1.379786] rtc_cmos 00:02: setting system clock to 2012-07-08 17:58:58 UTC (1341770338)
[    1.379792] powernow-k8: Found 1 AMD Athlon(tm) II X2 255 Processor (2 cpu cores) (version 2.20.00)
[    1.379819] powernow-k8:    0 : pstate 0 (3100 MHz)
[    1.379821] powernow-k8:    1 : pstate 1 (2400 MHz)
[    1.379822] powernow-k8:    2 : pstate 2 (1900 MHz)
[    1.379823] powernow-k8:    3 : pstate 3 (800 MHz)
[    1.380136] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.380137] EDD information not available.
[    1.380227] Freeing unused kernel memory: 696k freed
[    1.380375] Write protecting the kernel text: 5332k
[    1.380403] Write protecting the kernel read-only data: 2188k
[    1.395915] udevd[80]: starting version 173
[    1.429965] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.430111] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[    1.430116] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[    1.430120] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.493119] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 20:cf:30:eb:10:42
[    1.493123] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.493167] sata_nv 0000:00:08.0: version 3.5
[    1.493183] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.493214] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.493397] scsi0 : sata_nv
[    1.493494] scsi1 : sata_nv
[    1.493574] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[    1.493576] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[    1.493589] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[    1.493614] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.494333] scsi2 : sata_nv
[    1.494381] scsi3 : sata_nv
[    1.494444] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[    1.494446] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[    1.494484] pata_amd 0000:00:06.0: version 0.4.1
[    1.494516] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.494968] scsi4 : pata_amd
[    1.495175] scsi5 : pata_amd
[    1.495467] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.495469] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.792057] usb 1-4: new high speed USB device number 4 using ehci_hcd
[    1.872040] Refined TSC clocksource calibration: 3114.162 MHz.
[    1.872050] Switching to clocksource tsc
[    1.960057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.960062] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.968156] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[    1.968241] ata1.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
[    1.968244] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.976239] ata1.00: configured for UDMA/133
[    1.976347] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD502HJ  1AJ1 PQ: 0 ANSI: 5
[    1.976470] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.976541] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.976596] sd 0:0:0:0: [sda] Write Protect is off
[    1.976598] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.976621] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.984434] ata3.00: configured for UDMA/100
[    2.005143]  sda: sda1 sda2 < sda5 >
[    2.005399] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.040039] usb 1-7: new high speed USB device number 5 using ehci_hcd
[    2.175789] usbcore: registered new interface driver uas
[    2.284039] usb 1-8: new high speed USB device number 6 using ehci_hcd
[    2.298247] ata2: SATA link down (SStatus 0 SControl 300)
[    2.301719] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN03 PQ: 0 ANSI: 5
[    2.310867] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.310870] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.310981] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.311038] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.630248] ata4: SATA link down (SStatus 0 SControl 300)
[    2.630328] ata6: port disabled. ignoring.
[    2.630954] Initializing USB Mass Storage driver...
[    2.631305] scsi6 : usb-storage 1-7:1.0
[    2.631368] usbcore: registered new interface driver usb-storage
[    2.631370] USB Mass Storage support registered.
[    2.979246] scsi7 : usb-storage 1-8:1.0
[    2.979490] usbcore: registered new interface driver ums-realtek
[    3.008592] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.280044] usb 2-2: new full speed USB device number 2 using ohci_hcd
[    3.629132] scsi 6:0:0:0: Direct-Access     WD       Elements 1023    2005 PQ: 0 ANSI: 4
[    3.684219] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.684878] sd 6:0:0:0: [sdb] 1465143296 512-byte logical blocks: (750 GB/698 GiB)
[    3.685751] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[    3.686626] sd 6:0:0:0: [sdb] Asking for cache data failed
[    3.686630] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.688256] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[    3.689125] sd 6:0:0:0: [sdb] Asking for cache data failed
[    3.689129] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.728259]  sdb: sdb1
[    3.730128] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[    3.731004] sd 6:0:0:0: [sdb] Asking for cache data failed
[    3.731007] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.731010] sd 6:0:0:0: [sdb] Attached SCSI disk
[    3.796045] usb 2-3: new low speed USB device number 3 using ohci_hcd
[    3.982633] scsi 7:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    4.028204] sd 7:0:0:0: Attached scsi generic sg3 type 0
[    4.030000] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   11.886844] udevd[324]: starting version 173
[   11.924887] lp: driver loaded but no devices found
[   11.930107] i2c i2c-0: nForce2 SMBus adapter at 0x600
[   11.930126] i2c i2c-1: nForce2 SMBus adapter at 0x700
[   11.964476] type=1400 audit(1341770349.081:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=395 comm="apparmor_parser"
[   11.964762] type=1400 audit(1341770349.081:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=395 comm="apparmor_parser"
[   11.964943] type=1400 audit(1341770349.081:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=395 comm="apparmor_parser"
[   11.983677] wmi: Mapper loaded
[   11.984790] Adding 4192252k swap on /dev/sda5.  Priority:-1 extents:1 across:4192252k
[   11.991030] [drm] Initialized drm 1.1.0 20060810
[   12.015062] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[   12.015077] nouveau 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[   12.015082] nouveau 0000:02:00.0: setting latency timer to 64
[   12.016050] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096000c1)
[   12.018815] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[   12.047806] input: A4TECH USB Device as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
[   12.048153] generic-usb 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:02.0-2/input0
[   12.053564] input: A4TECH USB Device as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
[   12.053639] generic-usb 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:02.0-2/input1
[   12.058298] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
[   12.058369] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:02.0-3/input0
[   12.071785] [drm] nouveau 0000:02:00.0: ... appears to be valid
[   12.071788] [drm] nouveau 0000:02:00.0: BIT BIOS found
[   12.071790] [drm] nouveau 0000:02:00.0: Bios version 62.94.96.00
[   12.071793] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[   12.071795] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[   12.071797] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[   12.071799] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[   12.071801] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[   12.071804] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[   12.071806] [drm] nouveau 0000:02:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[   12.071808] [drm] nouveau 0000:02:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[   12.071811] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD235
[   12.096923] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD69E
[   12.099905] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE726
[   12.099911] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE847
[   12.100984] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEB6F
[   12.100986] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEBD4
[   12.118356] parport_pc 00:05: reported by Plug and Play ACPI
[   12.118398] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.120830] [drm] nouveau 0000:02:00.0: 0xEBD4: Condition still not met after 20ms, skipping following opcodes
[   12.124471] [drm] nouveau 0000:02:00.0: timingset 255 does not exist
[   12.176998] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.182616] cfg80211: Calling CRDA to update world regulatory domain
[   12.204211] lp0: using parport0 (interrupt-driven).
[   12.294829] ppdev: user-space parallel port driver
[   12.325720] cfg80211: World regulatory domain updated:
[   12.325723] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.325726] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.325728] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.325730] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.325732] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.325733] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.329047] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   12.329053] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[   12.329055] hda_intel: Disabling MSI
[   12.329071] HDA Intel 0000:00:05.0: setting latency timer to 64
[   12.377082] [drm] nouveau 0000:02:00.0: 1 available performance level(s)
[   12.377085] [drm] nouveau 0000:02:00.0: 3: memory 400MHz core 450MHz shader 1125MHz fanspeed 100%
[   12.377097] [drm] nouveau 0000:02:00.0: c: memory 399MHz core 400MHz shader 800MHz
[   12.377226] [TTM] Zone  kernel: Available graphics memory: 430986 kiB.
[   12.377228] [TTM] Zone highmem: Available graphics memory: 1549006 kiB.
[   12.377230] [TTM] Initializing pool allocator.
[   12.377240] [drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM
[   12.378776] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[   12.391750] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.391752] [drm] No driver support for vblank timestamp query.
[   12.440791] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   12.440795] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440797] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   12.440799] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440800] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   12.440802] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440804] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   12.440805] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440807] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   12.440809] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440810] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   12.440812] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440814] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   12.440815] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440817] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   12.440819] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440820] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   12.440822] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440823] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   12.440825] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440827] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   12.440829] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440830] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   12.440832] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440833] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   12.440835] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.440837] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   12.440839] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   12.447462] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.448678] ieee80211 phy0: hwaddr 00:e0:0c:e0:de:75, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[   12.557957] [drm] nouveau 0000:02:00.0: allocated 1360x768 fb: 0x40000000, bo f1ef9600
[   12.558100] fbcon: nouveaufb (fb0) is primary device
[   12.558376] Console: switching to colour frame buffer device 170x48
[   12.558401] fb0: nouveaufb frame buffer device
[   12.558402] drm: registered panic notifier
[   12.558407] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
[   12.585951] rtl8187: Customer ID is 0x00
[   12.585988] Registered led device: rtl8187-phy0::radio
[   12.586004] Registered led device: rtl8187-phy0::tx
[   12.586016] Registered led device: rtl8187-phy0::rx
[   12.586713] rtl8187: wireless switch is on
[   12.586738] usbcore: registered new interface driver rtl8187
[   12.613932] type=1400 audit(1341770349.729:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=873 comm="apparmor_parser"
[   12.614604] type=1400 audit(1341770349.729:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=874 comm="apparmor_parser"
[   12.615311] type=1400 audit(1341770349.729:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=874 comm="apparmor_parser"
[   12.615497] type=1400 audit(1341770349.729:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=874 comm="apparmor_parser"
[   12.625369] type=1400 audit(1341770349.741:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=876 comm="apparmor_parser"
[   12.627551] type=1400 audit(1341770349.741:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=878 comm="apparmor_parser"
[   12.632909] type=1400 audit(1341770349.749:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=876 comm="apparmor_parser"
[   12.838335] init: failsafe main process (815) killed by TERM signal
[   12.839318] init: apport pre-start process (917) terminated with status 1
[   12.846063] init: apport post-stop process (948) terminated with status 1
[   12.852723] init: alsa-restore main process (921) terminated with status 19
[   13.017012] Bluetooth: Core ver 2.16
[   13.017045] NET: Registered protocol family 31
[   13.017047] Bluetooth: HCI device and connection manager initialized
[   13.017049] Bluetooth: HCI socket layer initialized
[   13.017050] Bluetooth: L2CAP socket layer initialized
[   13.017347] Bluetooth: SCO socket layer initialized
[   13.019016] Bluetooth: RFCOMM TTY layer initialized
[   13.019023] Bluetooth: RFCOMM socket layer initialized
[   13.019024] Bluetooth: RFCOMM ver 1.11
[   13.036515] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.036517] Bluetooth: BNEP filters: protocol multicast
[   14.985545] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.987663] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   14.987844] forcedeth 0000:00:07.0: eth0: no link during initialization
[   14.988449] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.271668] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   15.721097] init: plymouth-stop pre-start process (1317) terminated with status 1
[   16.176179] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   19.821223] wlan0: authenticate with 40:4a:03:7f:94:4e (try 1)
[   19.823093] wlan0: authenticated
[   19.981219] wlan0: associate with 40:4a:03:7f:94:4e (try 1)
[   19.983980] wlan0: RX AssocResp from 40:4a:03:7f:94:4e (capab=0x431 status=0 aid=1)
[   19.983984] wlan0: associated
[   19.986531] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.986582] cfg80211: Calling CRDA for country: TR
[   19.989369] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   19.989373] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989374] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   19.989376] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989378] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   19.989380] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989381] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   19.989383] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989385] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   19.989386] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989388] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   19.989390] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989391] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   19.989393] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989394] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   19.989396] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989398] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   19.989399] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989401] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   19.989403] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989404] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   19.989406] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989407] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   19.989409] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989411] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   19.989412] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   19.989414] cfg80211: Disabling freq 2484 MHz
[   19.989416] cfg80211: Regulatory domain changed to country: TR
[   19.989417] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.989419] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   19.989421] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   19.989422] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   22.092053] generic-usb 0003:1C4F:0002.0004: usb_submit_urb(ctrl) failed
[   22.092060] generic-usb 0003:1C4F:0002.0004: timeout initializing reports
[   22.092156] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input5
[   22.092232] generic-usb 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:02.0-3/input1
[   22.092249] usbcore: registered new interface driver usbhid
[   22.092251] usbhid: USB HID core driver
[   22.269776] audit_printk_skb: 15 callbacks suppressed
[   22.269778] type=1400 audit(1341770359.385:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1598 comm="apparmor_parser"
[   22.270230] type=1400 audit(1341770359.385:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1598 comm="apparmor_parser"
[   31.136020] wlan0: no IPv6 routers present
[   66.066374] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
[   66.066377] ata1.00: BMDMA stat 0x24
[   66.066379] ata1: SError: { Handshk }
[   66.066382] ata1.00: failed command: WRITE DMA
[   66.066385] ata1.00: cmd ca/00:10:58:7b:08/00:00:00:00:00/e0 tag 0 dma 8192 out
[   66.066386]          res 51/84:68:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[   66.066388] ata1.00: status: { DRDY ERR }
[   66.066390] ata1.00: error: { ICRC ABRT }
[   66.066394] ata1: hard resetting link
[   66.066395] ata1: nv: skipping hardreset on occupied port
[   66.532051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   66.548243] ata1.00: configured for UDMA/133
[   66.548254] ata1: EH complete

dmesg | tail :

Kod Seç Genişlet

[   66.066382] ata1.00: failed command: WRITE DMA
[   66.066385] ata1.00: cmd ca/00:10:58:7b:08/00:00:00:00:00/e0 tag 0 dma 8192 out
[   66.066386]          res 51/84:68:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[   66.066388] ata1.00: status: { DRDY ERR }
[   66.066390] ata1.00: error: { ICRC ABRT }
[   66.066394] ata1: hard resetting link
[   66.066395] ata1: nv: skipping hardreset on occupied port
[   66.532051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   66.548243] ata1.00: configured for UDMA/133
[   66.548254] ata1: EH complete


buyrunuz.

[burk]

@EminSargin öncelikle 12.04 sürümü denemenizi öneririm, güncel sürüm odur. Ayrıca;

Kod Seç Genişlet

lspci
komutunun çıktısını eksik vermişsiniz.

[if]

Forumda "ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter" şeklinde arama yapıldığında üreticinin sitesinden indirilen sürücüyü derleyerek çözüme ulaşıldığına dair bir kaç başlıkla karşılaşılacaktır.

[EminSargin]

@burk lspci :

Kod Seç Genişlet

00:00.0 RAM memory: nVidia Corporation MCP61 LPC Bridge (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
02:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1)
tam ..

@if dediklerinize baktım fakat onlar dosya indiriyor 7 mb dosyayı 15-20 dk da indiriyor .. ordan yapmam çok zor driver sürücü kurmayı bilmiyorum.

[burk]

@EminSargin sürücüyü indirin, kurulumu beraber de yapabiliriz.

[EminSargin]

@burk evet şu an yardımcı olabilirmisiniz? driverini indirdim

[burk]

Diğer iletilerinizde de düzelttim, lütfen sürücü kelimesini kullanın. Şimdi sürücüyü indirdiğiniz adresi bana da verin lütfen.

[EminSargin]

@burk ben indirmedim cd'den yükledim .. internetim çok yavaş olduğu için inidremiyorum.. orjinal cd sinden yükledim. (masaüstüne attım ) daha kurulum yapamadım..


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 09 Temmuz 2012 - 00:38:44
@burk acaba kurulumda yardımcı olabilirmisiniz

[ersinkandemir]

Orjinal CD'de Linux için sürücü var mıdır ki?

[EminSargin]

evet var su an masaüstümde yardımcı olabilrmisiniz kurulumda @Ersin Kandemir

[ersinkandemir]

Uzantısı nedir? Klasörse, klasör içeriğini alabilir miyiz?

[EminSargin]

@Ersin Kandemir http://e1207.hizliresim.com/z/9/9k1rw.jpg klasörün içeriği budur ...

[ersinkandemir]

Kod Seç Genişlet


cd ~/Desktop/driver
sudo make
sudo make install

Komutlarını çalıştırır mısınız?