Ubuntu 12.04 ATI sürücüsü yükleme/yapılandırma sorunu

[osmancık]

11.10 dan 12.04 e yükseltme yaptığım için bir sorun olmuştur düşüncesiyle temiz bir 12.04 kurulumu yaptım. İlk kurduktan sonra Sistem Ayarları > Ayrıntılar bölümünde "Grafik" olarak "Gallium 0.4 on AMD REDWOOD" yazıyordu. Dolayısıyla MESA sürücüsü benim kartımı "Gallium 0.4 on AMD REDWOOD" olarak görüyor.

Sonra jockey ile sürücü yüklemeye çalıştım. "(Sürüm sonrası güncellemeler)" olarak belirtilen sürücüyü kuramıyorum hata veriyor. Onun altındakini hatasız kurdum. fglrxinfo çıktısı şöyle:

Kod Seç Genişlet

fglrxinfo
display: :0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Mobility Radeon HD 5000
OpenGL version string: 4.2.11627 Compatibility Profile Context

Dolayısıyla bu sürücü benim kartı "ATI Mobility Radeon HD 5000" olarak görüyor.

AMD nin kendi sitesinden sürücü indirip kurmak baya bir sıkıntılı patch yapmayınca fglrxinfo çıktısı hata veriyor. Ancak sonunda patch falan yapıp bir şekilde bu sürücüyü de kurmayı başardım. Bunun fglrxinfo çıktısında benim kartı HD 6570M / HD5000 Series gibi bir sonuç verdi.

Bilgisayarı ilk aldığımda gelen win7 den baktığımda ekran kartımı HD 6570M olarak görüyor. Aldığım yerde de ekran kartı olarak bu yazıyordu zaten.

Sonuç olarak yukarıda bahsettiğim 3 sürücünün performans bakımından bir farkı yok. Hangisini yüklersem yükleyim normal masaüstü kullanımında donmalar oluyor. 3d bir uygulama hiç denemedim. Şu konuda da bu donmalardan bahsetmiştim. Aynı problemden şurada birisi bahsetmiş ve bendeki de aynı makina.(Lenovo ideapad y560p) Bu bilgisayarı yeni aldım ve ekran kartı nedeniyle ubuntu kullanamıyorum. 4 yıldır linux kullanıcısıyım ve bu saatten sonra windows a geçemem. Ne yapmalıyım? Bu sorunu bildirebileceğim bir yerler var mı?

Not: Bir de şu var. Catalyst control center çoğu zaman açılırken hata çıkarıyor. Sorunu bildir diye biye bir diyalog kutusu açılıyor ve uygulama başlamıyor. Bazen açabildiğimde de ekran kartımın modeli vs. hiçbir bilgi vermiyor. 3-4 tane 3d ile alakalı ayar seçeneği var sadece.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 04 Haziran 2012 - 01:06:24
lspci çıktısı

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Mobility Radeon HD 5000 Series]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Redwood HDMI Audio [Radeon HD 5000 Series]
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
09:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20)
09:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20)
09:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20)
09:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20)


[if]

@osmancık, jockey ile güncelleme yüklenemiyor maalesef. ATI wikisinden faydalanalım:

If you experience issues or a hang, you may need to disable fast TLS.

Kod Seç Genişlet

sudo amdconfig --tls=0

Bu komutu deneyip sonucu aktarır mısınız?

[osmancık]

Kod Seç Genişlet

sudo amdconfig --tls=0
Warning: Option 'UseFastTLS' doesn't affect running session.
Using /etc/X11/xorg.conf
Saving back-up to /etc/X11/xorg.conf.fglrx-2

reboot yaptım. Bir değişme yok donmalar devam ediyor.

[if]

@osmancık, bir şey bulamadım. Sürücüyü yüklemeden önce Compiz ayarlarını değiştirmiş miydiniz?

Kod Seç Genişlet

dmesg > gmesg.log
cat /vat /log/Xorg.0.log çıktılarını alayım. dmesg.log belgesinin içindekileri buraya geçmelisiniz.

[osmancık]

compizle ilgili hiçbirşey yapmadım.

dmesg

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-24-generic-pae (buildd@vernadsky) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 (Ubuntu 3.2.0-24.39-generic-pae 3.2.16)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[    0.000000]  BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000c727c000 (usable)
[    0.000000]  BIOS-e820: 00000000c727c000 - 00000000c7282000 (reserved)
[    0.000000]  BIOS-e820: 00000000c7282000 - 00000000c73f2000 (usable)
[    0.000000]  BIOS-e820: 00000000c73f2000 - 00000000c740f000 (reserved)
[    0.000000]  BIOS-e820: 00000000c740f000 - 00000000c7470000 (usable)
[    0.000000]  BIOS-e820: 00000000c7470000 - 00000000c74f1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000c74f1000 - 00000000c770f000 (reserved)
[    0.000000]  BIOS-e820: 00000000c770f000 - 00000000c7718000 (usable)
[    0.000000]  BIOS-e820: 00000000c7718000 - 00000000c771f000 (reserved)
[    0.000000]  BIOS-e820: 00000000c771f000 - 00000000c777f000 (usable)
[    0.000000]  BIOS-e820: 00000000c777f000 - 00000000c779f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000c779f000 - 00000000c77e1000 (usable)
[    0.000000]  BIOS-e820: 00000000c77e1000 - 00000000c77ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000c77ff000 - 00000000c7800000 (usable)
[    0.000000]  BIOS-e820: 00000000c7800000 - 00000000c8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e00f8000 - 00000000e00f9000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 00000001b7800000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: LENOVO                           IdeaPad Y560p   /KL3                             , BIOS 3FCN19WW   02/11/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1b7800 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FF8000000 write-back
[    0.000000]   4 base 100000000 mask F80000000 write-back
[    0.000000]   5 base 180000000 mask FE0000000 write-back
[    0.000000]   6 base 1A0000000 mask FF0000000 write-back
[    0.000000]   7 base 1B0000000 mask FF8000000 write-back
[    0.000000]   8 base 1B7800000 mask FFF800000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 1, base: 0GB, range: 2GB, type WB
[    0.000000] reg 2, base: 2GB, range: 1GB, type WB
[    0.000000] reg 3, base: 3GB, range: 128MB, type WB
[    0.000000] reg 4, base: 4GB, range: 2GB, type WB
[    0.000000] reg 5, base: 6GB, range: 512MB, type WB
[    0.000000] reg 6, base: 6656MB, range: 256MB, type WB
[    0.000000] reg 7, base: 6912MB, range: 128MB, type WB
[    0.000000] reg 8, base: 7032MB, range: 8MB, type UC
[    0.000000] total RAM covered: 6136M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 16M num_reg: 8  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 128MB, type WB
[    0.000000] reg 3, base: 4GB, range: 2GB, type WB
[    0.000000] reg 4, base: 6GB, range: 512MB, type WB
[    0.000000] reg 5, base: 6656MB, range: 256MB, type WB
[    0.000000] reg 6, base: 6912MB, range: 128MB, type WB
[    0.000000] reg 7, base: 7032MB, range: 8MB, type UC
[    0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] found SMP MP-table at [c00f70b0] f70b0
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c0098000] 98000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 364fc000 - 37276000
[    0.000000] ACPI: RSDP 000f6f70 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT c77f1e3a 0006C (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: FACP c77e3000 000F4 (v03 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: DSDT c77e4000 0BC8C (v02 LENOVO CB-01    06040000 INTL 20060912)
[    0.000000] ACPI: FACS c779cfc0 00040
[    0.000000] ACPI: SSDT c77fdb62 01068 (v01 LENOVO CB-01    06040000 INTL 20060912)
[    0.000000] ACPI: HPET c77fed32 00038 (v01 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: MCFG c77fed6a 0003C (v01 LENOVO CB-01    06040000 PTEC 00000001)
[    0.000000] ACPI: APIC c77feda6 000BC (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: BOOT c77fee62 00028 (v01 LENOVO CB-01    06040000  LTP 00000001)
[    0.000000] ACPI: SLIC c77fee8a 00176 (v01 LENOVO CB-01    06040000  LTP 00000000)
[    0.000000] ACPI: SSDT c77e2000 0090C (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT c77e1000 00996 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 6140MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x001b7800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[9] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x000c727c
[    0.000000]     0: 0x000c7282 -> 0x000c73f2
[    0.000000]     0: 0x000c740f -> 0x000c7470
[    0.000000]     0: 0x000c770f -> 0x000c7718
[    0.000000]     0: 0x000c771f -> 0x000c777f
[    0.000000]     0: 0x000c779f -> 0x000c77e1
[    0.000000]     0: 0x000c77ff -> 0x000c7800
[    0.000000]     0: 0x00100000 -> 0x001b7800
[    0.000000] On node 0 totalpages: 1567877
[    0.000000] free_area_init_node: node 0, pgdat c186b440, node_mem_map f2e0c200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3948 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 12281 pages used for memmap
[    0.000000]   HighMem zone: 1327362 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at e00f9000 (gap: e00f9000:1ec23000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s34240 r0 d23104 u262144
[    0.000000] pcpu-alloc: s34240 r0 d23104 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1553812
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic-pae root=UUID=5cdb0d40-c1e9-45cc-a8bb-46a4ff3a0d90 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] allocated 28802816 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:001b7800)
[    0.000000] Memory: 6161620k/7200768k available (5825k kernel code, 109888k reserved, 2849k data, 740k init, 5358572k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1879000 - 0xc1932000   ( 740 kB)
[    0.000000]       .data : 0xc15b06fc - 0xc1878cc0   (2849 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15b06fc   (5825 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 1995.453 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.90 BogoMIPS (lpj=7981812)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000029] Security Framework initialized
[    0.000043] AppArmor: AppArmor initialized
[    0.000045] Yama: becoming mindful.
[    0.000094] Mount-cache hash table entries: 512
[    0.000213] Initializing cgroup subsys cpuacct
[    0.000219] Initializing cgroup subsys memory
[    0.000226] Initializing cgroup subsys devices
[    0.000228] Initializing cgroup subsys freezer
[    0.000231] Initializing cgroup subsys blkio
[    0.000236] Initializing cgroup subsys perf_event
[    0.000262] CPU: Physical Processor ID: 0
[    0.000264] CPU: Processor Core ID: 0
[    0.000269] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.000270] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.000274] mce: CPU supports 9 MCE banks
[    0.000289] CPU0: Thermal monitoring enabled (TM1)
[    0.000299] using mwait in idle threads.
[    0.002842] ACPI: Core revision 20110623
[    0.020001] ftrace: allocating 26595 entries in 53 pages
[    0.031338] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.031765] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071437] CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz stepping 07
[    0.176310] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.176316] PEBS disabled due to CPU errata.
[    0.176318] ... version:                3
[    0.176320] ... bit width:              48
[    0.176321] ... generic registers:      4
[    0.176323] ... value mask:             0000ffffffffffff
[    0.176324] ... max period:             000000007fffffff
[    0.176326] ... fixed-purpose events:   3
[    0.176328] ... event mask:             000000070000000f
[    0.176486] NMI watchdog enabled, takes one hw-pmu counter.
[    0.176566] CPU 1 irqstacks, hard=f7558000 soft=f755a000
[    0.176567] Booting Node   0, Processors  #1
[    0.176570] smpboot cpu 1: start_ip = 98000
[    0.187003] Initializing CPU#1
[    0.284382] NMI watchdog enabled, takes one hw-pmu counter.
[    0.284463] CPU 2 irqstacks, hard=f7586000 soft=f7588000
[    0.284465]  #2
[    0.284466] smpboot cpu 2: start_ip = 98000
[    0.294810] Initializing CPU#2
[    0.392373] NMI watchdog enabled, takes one hw-pmu counter.
[    0.392453] CPU 3 irqstacks, hard=f759c000 soft=f759e000
[    0.392455]  #3
[    0.392456] smpboot cpu 3: start_ip = 98000
[    0.402800] Initializing CPU#3
[    0.500261] NMI watchdog enabled, takes one hw-pmu counter.
[    0.500342] CPU 4 irqstacks, hard=f75b6000 soft=f75b8000
[    0.500344]  #4
[    0.500345] smpboot cpu 4: start_ip = 98000
[    0.510760] Initializing CPU#4
[    0.608298] NMI watchdog enabled, takes one hw-pmu counter.
[    0.608387] CPU 5 irqstacks, hard=f75d4000 soft=f75d6000
[    0.608389]  #5
[    0.608390] smpboot cpu 5: start_ip = 98000
[    0.618733] Initializing CPU#5
[    0.716200] NMI watchdog enabled, takes one hw-pmu counter.
[    0.716279] CPU 6 irqstacks, hard=f75e2000 soft=f75e4000
[    0.716281]  #6
[    0.716283] smpboot cpu 6: start_ip = 98000
[    0.726626] Initializing CPU#6
[    0.824190] NMI watchdog enabled, takes one hw-pmu counter.
[    0.824274] CPU 7 irqstacks, hard=f7616000 soft=f7618000
[    0.824276]  #7 Ok.
[    0.824277] smpboot cpu 7: start_ip = 98000
[    0.834620] Initializing CPU#7
[    0.932186] NMI watchdog enabled, takes one hw-pmu counter.
[    0.932213] Brought up 8 CPUs
[    0.932216] Total of 8 processors activated (31926.23 BogoMIPS).
[    0.941797] devtmpfs: initialized
[    0.941918] EVM: security.selinux
[    0.941920] EVM: security.SMACK64
[    0.941922] EVM: security.capability
[    0.941946] PM: Registering ACPI NVS region at c7470000 (528384 bytes)
[    0.941959] PM: Registering ACPI NVS region at c777f000 (131072 bytes)
[    0.943047] print_constraints: dummy:
[    0.943079] RTC time: 15:29:56, date: 06/04/12
[    0.943118] NET: Registered protocol family 16
[    0.943221] Trying to unpack rootfs image as initramfs...
[    0.943224] EISA bus registered
[    0.943241] ACPI: bus type pci registered
[    0.943307] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.943311] PCI: not using MMCONFIG
[    0.948215] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[    0.948335] PCI: PCI BIOS revision 3.00 entry at 0xfddb2, last bus=9
[    0.948337] PCI: Using configuration type 1 for base access
[    0.949399] bio: create slab <bio-0> at 0
[    0.949476] ACPI: Added _OSI(Module Device)
[    0.949478] ACPI: Added _OSI(Processor Device)
[    0.949480] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.949482] ACPI: Added _OSI(Processor Aggregator Device)
[    0.951953] ACPI: EC: Look up EC in DSDT
[    0.954441] ACPI: Executed 1 blocks of module-level executable AML code
[    0.959143] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.959589] ACPI: SSDT c7719718 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.960232] ACPI: Dynamic OEM Table Load:
[    0.960236] ACPI: SSDT   (null) 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.984282] ACPI: SSDT c771aa98 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.984967] ACPI: Dynamic OEM Table Load:
[    0.984970] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    1.020122] ACPI: SSDT c7718d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    1.020755] ACPI: Dynamic OEM Table Load:
[    1.020758] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    1.218404] ACPI: Interpreter enabled
[    1.218424] ACPI: (supports S0 S1 S3 S4 S5)
[    1.218454] ACPI: Using IOAPIC for interrupt routing
[    1.218478] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    1.218929] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    1.218931] PCI: Using MMCONFIG for extended config space
[    1.230794] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.231050] ACPI: No dock devices found.
[    1.231052] HEST: Table not found.
[    1.231058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.231390] \_SB_.PCI0:_OSC invalid UUID
[    1.231392] _OSC request data:1 8 1f
[    1.231397] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.231988] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.231991] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.231994] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.231997] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.232000] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.232002] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    1.232005] pci_root PNP0A08:00: host bridge window [mem 0xc8000000-0xfeafffff]
[    1.232008] pci_root PNP0A08:00: host bridge window [mem 0xc8000000-0xcfe00000]
[    1.232010] pci_root PNP0A08:00: host bridge window [mem 0xfeaff100-0xfeb00000]
[    1.232014] pci_root PNP0A08:00: host bridge window expanded to [mem 0xc8000000-0xfeafffff]; [mem 0xc8000000-0xcfe00000] ignored
[    1.232017] pci_root PNP0A08:00: host bridge window expanded to [mem 0xc8000000-0xfeb00000]; [mem 0xfeaff100-0xfeb00000] ignored
[    1.232031] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    1.232077] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    1.232116] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.232120] pci 0000:00:01.0: PME# disabled
[    1.232191] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.232219] pci 0000:00:16.0: reg 10: [mem 0xf8806800-0xf880680f 64bit]
[    1.232305] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.232310] pci 0000:00:16.0: PME# disabled
[    1.232355] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.232378] pci 0000:00:1a.0: reg 10: [mem 0xf8807000-0xf88073ff]
[    1.232479] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.232484] pci 0000:00:1a.0: PME# disabled
[    1.232515] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.232533] pci 0000:00:1b.0: reg 10: [mem 0xf8800000-0xf8803fff 64bit]
[    1.232612] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.232617] pci 0000:00:1b.0: PME# disabled
[    1.232642] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.232733] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.232738] pci 0000:00:1c.0: PME# disabled
[    1.232766] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    1.232856] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.232861] pci 0000:00:1c.1: PME# disabled
[    1.232890] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    1.232981] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.232985] pci 0000:00:1c.3: PME# disabled
[    1.233016] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
[    1.233107] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    1.233112] pci 0000:00:1c.6: PME# disabled
[    1.233146] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.233169] pci 0000:00:1d.0: reg 10: [mem 0xf8807400-0xf88077ff]
[    1.233269] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.233275] pci 0000:00:1d.0: PME# disabled
[    1.233301] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[    1.233440] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    1.233462] pci 0000:00:1f.2: reg 10: [io  0x1818-0x181f]
[    1.233471] pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
[    1.233481] pci 0000:00:1f.2: reg 18: [io  0x1810-0x1817]
[    1.233491] pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
[    1.233500] pci 0000:00:1f.2: reg 20: [io  0x1820-0x183f]
[    1.233510] pci 0000:00:1f.2: reg 24: [mem 0xf8806000-0xf88067ff]
[    1.233563] pci 0000:00:1f.2: PME# supported from D3hot
[    1.233568] pci 0000:00:1f.2: PME# disabled
[    1.233588] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.233606] pci 0000:00:1f.3: reg 10: [mem 0xf8807800-0xf88078ff 64bit]
[    1.233631] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    1.233704] pci 0000:01:00.0: [1002:68c0] type 0 class 0x000300
[    1.233727] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.233745] pci 0000:01:00.0: reg 18: [mem 0xcfee0000-0xcfefffff 64bit]
[    1.233758] pci 0000:01:00.0: reg 20: [io  0x2000-0x20ff]
[    1.233781] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    1.233837] pci 0000:01:00.0: supports D1 D2
[    1.233868] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[    1.233891] pci 0000:01:00.1: reg 10: [mem 0xcfedc000-0xcfedffff 64bit]
[    1.233998] pci 0000:01:00.1: supports D1 D2
[    1.239929] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.239933] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.239936] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    1.239940] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.240015] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[    1.240046] pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf800ffff 64bit]
[    1.240188] pci 0000:03:00.0: supports D1
[    1.240190] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    1.240196] pci 0000:03:00.0: PME# disabled
[    1.247929] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.247934] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.247939] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    1.247946] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.248079] pci 0000:05:00.0: [14e4:1692] type 0 class 0x000200
[    1.248130] pci 0000:05:00.0: reg 10: [mem 0xf8400000-0xf840ffff 64bit]
[    1.248401] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    1.248411] pci 0000:05:00.0: PME# disabled
[    1.248621] Freeing initrd memory: 13800k freed
[    1.255994] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    1.256012] pci 0000:00:1c.1:   bridge window [mem 0xf8400000-0xf84fffff]
[    1.256106] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[    1.256110] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    1.256115] pci 0000:00:1c.3:   bridge window [mem 0xf8200000-0xf83fffff]
[    1.256123] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.256201] pci 0000:09:00.0: [197b:2387] type 0 class 0x000880
[    1.256229] pci 0000:09:00.0: reg 10: [mem 0xf8500000-0xf85000ff]
[    1.256343] pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    1.256494] pci 0000:09:00.2: [197b:2386] type 0 class 0x000805
[    1.256521] pci 0000:09:00.2: reg 10: [mem 0xf8500400-0xf85004ff]
[    1.256777] pci 0000:09:00.3: [197b:2388] type 0 class 0x000880
[    1.256805] pci 0000:09:00.3: reg 10: [mem 0xf8500800-0xf85008ff]
[    1.257062] pci 0000:09:00.4: [197b:2389] type 0 class 0x000880
[    1.257091] pci 0000:09:00.4: reg 10: [mem 0xf8500c00-0xf8500cff]
[    1.263947] pci 0000:00:1c.6: PCI bridge to [bus 09-09]
[    1.263962] pci 0000:00:1c.6:   bridge window [mem 0xf8500000-0xf85fffff]
[    1.264027] pci_bus 0000:00: on NUMA node 0
[    1.264038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.264279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    1.264356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.264405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.264456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.264509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[    1.264606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    1.264706] \_SB_.PCI0:_OSC invalid UUID
[    1.264708] _OSC request data:1 1f 1f
[    1.264713]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.264750] \_SB_.PCI0:_OSC invalid UUID
[    1.264752] _OSC request data:1 0 1d
[    1.264756]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.264758] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.269144] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[    1.269201] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[    1.269254] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[    1.269306] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[    1.269358] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.269411] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.269464] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
[    1.269516] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[    1.269646] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.269651] vgaarb: loaded
[    1.269652] vgaarb: bridge control possible 0000:01:00.0
[    1.269760] i2c-core: driver [aat2870] using legacy suspend method
[    1.269762] i2c-core: driver [aat2870] using legacy resume method
[    1.269836] SCSI subsystem initialized
[    1.269882] libata version 3.00 loaded.
[    1.269927] usbcore: registered new interface driver usbfs
[    1.269938] usbcore: registered new interface driver hub
[    1.269958] usbcore: registered new device driver usb
[    1.270042] PCI: Using ACPI for IRQ routing
[    1.270195] PCI: pci_cache_line_size set to 64 bytes
[    1.270368] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[    1.270371] reserve RAM buffer: 00000000c727c000 - 00000000c7ffffff
[    1.270376] reserve RAM buffer: 00000000c73f2000 - 00000000c7ffffff
[    1.270380] reserve RAM buffer: 00000000c7470000 - 00000000c7ffffff
[    1.270385] reserve RAM buffer: 00000000c7718000 - 00000000c7ffffff
[    1.270388] reserve RAM buffer: 00000000c777f000 - 00000000c7ffffff
[    1.270391] reserve RAM buffer: 00000000c77e1000 - 00000000c7ffffff
[    1.270394] reserve RAM buffer: 00000000c7800000 - 00000000c7ffffff
[    1.270396] reserve RAM buffer: 00000001b7800000 - 00000001b7ffffff
[    1.270494] NetLabel: Initializing
[    1.270496] NetLabel:  domain hash size = 128
[    1.270498] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.270508] NetLabel:  unlabeled traffic allowed by default
[    1.270554] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.270561] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.272584] Switching to clocksource hpet
[    1.279856] AppArmor: AppArmor Filesystem Enabled
[    1.279873] pnp: PnP ACPI init
[    1.279887] ACPI: bus type pnp registered
[    1.280199] pnp 00:00: [bus 00-3e]
[    1.280202] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.280205] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.280207] pnp 00:00: [io  0x0d00-0xffff window]
[    1.280209] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.280211] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.280214] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.280216] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.280218] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.280220] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.280223] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.280225] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.280227] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.280229] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.280232] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.280234] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.280236] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.280238] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.280241] pnp 00:00: [mem 0xc8000000-0xfeafffff window]
[    1.280243] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.280245] pnp 00:00: [mem 0xc8000000-0xcfe00000 window]
[    1.280247] pnp 00:00: [mem 0xfeaff100-0xfeb00000 window]
[    1.280311] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.280342] pnp 00:01: [io  0x0000-0x001f]
[    1.280344] pnp 00:01: [io  0x0081-0x0091]
[    1.280346] pnp 00:01: [io  0x0093-0x009f]
[    1.280350] pnp 00:01: [io  0x00c0-0x00df]
[    1.280352] pnp 00:01: [dma 4]
[    1.280383] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.280392] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.280418] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.280495] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.280521] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.280542] pnp 00:04: [io  0x00f0]
[    1.280552] pnp 00:04: [irq 13]
[    1.280579] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.280591] pnp 00:05: [io  0x002e-0x002f]
[    1.280593] pnp 00:05: [io  0x004e-0x004f]
[    1.280595] pnp 00:05: [io  0x0061]
[    1.280596] pnp 00:05: [io  0x0063]
[    1.280598] pnp 00:05: [io  0x0065]
[    1.280600] pnp 00:05: [io  0x0067]
[    1.280602] pnp 00:05: [io  0x0070]
[    1.280603] pnp 00:05: [io  0x0080]
[    1.280605] pnp 00:05: [io  0x0092]
[    1.280607] pnp 00:05: [io  0x00b2-0x00b3]
[    1.280609] pnp 00:05: [io  0x0680-0x069f]
[    1.280611] pnp 00:05: [io  0x0700-0x070f]
[    1.280613] pnp 00:05: [io  0xffff]
[    1.280615] pnp 00:05: [io  0xffff]
[    1.280616] pnp 00:05: [io  0x0400-0x0453]
[    1.280618] pnp 00:05: [io  0x0458-0x047f]
[    1.280620] pnp 00:05: [io  0x0500-0x057f]
[    1.280622] pnp 00:05: [io  0x164e-0x164f]
[    1.280672] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.280675] system 00:05: [io  0x0700-0x070f] has been reserved
[    1.280677] system 00:05: [io  0xffff] has been reserved
[    1.280680] system 00:05: [io  0xffff] has been reserved
[    1.280682] system 00:05: [io  0x0400-0x0453] has been reserved
[    1.280685] system 00:05: [io  0x0458-0x047f] has been reserved
[    1.280687] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.280690] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.280693] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.280702] pnp 00:06: [io  0x0070-0x0077]
[    1.280708] pnp 00:06: [irq 8]
[    1.280733] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.280762] pnp 00:07: [io  0x0454-0x0457]
[    1.280806] system 00:07: [io  0x0454-0x0457] has been reserved
[    1.280809] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.280840] pnp 00:08: [io  0x0060]
[    1.280842] pnp 00:08: [io  0x0064]
[    1.280848] pnp 00:08: [irq 1]
[    1.280875] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.280914] pnp 00:09: [irq 12]
[    1.280943] pnp 00:09: Plug and Play ACPI device, IDs SYN1044 SYN1000 SYN0002 PNP0f13 (active)
[    1.281067] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    1.281069] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[    1.281071] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    1.281073] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    1.281075] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    1.281077] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    1.281079] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[    1.281082] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[    1.281084] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    1.281086] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    1.281088] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    1.281090] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.281092] pnp 00:0a: [mem 0xc8000000-0xcfdfffff]
[    1.281094] pnp 00:0a: [mem 0xfeaff100-0xfeafffff]
[    1.281149] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.281152] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.281155] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.281158] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.281161] system 00:0a: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.281163] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.281166] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.281169] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.281172] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.281175] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    1.281177] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.281180] system 00:0a: [mem 0xc8000000-0xcfdfffff] has been reserved
[    1.281184] system 00:0a: [mem 0xfeaff100-0xfeafffff] has been reserved
[    1.281188] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.281751] pnp: PnP ACPI: found 11 devices
[    1.281753] ACPI: ACPI bus type pnp unregistered
[    1.281757] PnPBIOS: Disabled by ACPI PNP
[    1.318511] PCI: max bus depth: 1 pci_try_num: 2
[    1.318559] pci 0000:00:1c.6: BAR 15: assigned [mem 0xcff00000-0xcfffffff pref]
[    1.318564] pci 0000:00:1c.6: BAR 15: assigned [mem 0xe0100000-0xe03fffff pref]
[    1.318569] pci 0000:00:1c.6: BAR 13: assigned [io  0x5000-0x5fff]
[    1.318574] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[    1.318578] pci 0000:00:1c.1: BAR 13: assigned [io  0x6000-0x6fff]
[    1.318582] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[    1.318585] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.318588] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.318591] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    1.318595] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.318599] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.318603] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.318609] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    1.318614] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.318622] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    1.318626] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
[    1.318632] pci 0000:00:1c.1:   bridge window [mem 0xf8400000-0xf84fffff]
[    1.318637] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe05fffff 64bit pref]
[    1.318645] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[    1.318649] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    1.318655] pci 0000:00:1c.3:   bridge window [mem 0xf8200000-0xf83fffff]
[    1.318660] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.318669] pci 0000:09:00.0: BAR 6: assigned [mem 0xe0100000-0xe010ffff pref]
[    1.318671] pci 0000:00:1c.6: PCI bridge to [bus 09-09]
[    1.318675] pci 0000:00:1c.6:   bridge window [io  0x5000-0x5fff]
[    1.318681] pci 0000:00:1c.6:   bridge window [mem 0xf8500000-0xf85fffff]
[    1.318686] pci 0000:00:1c.6:   bridge window [mem 0xe0100000-0xe03fffff pref]
[    1.318705] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.318708] pci 0000:00:01.0: setting latency timer to 64
[    1.318716] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.318721] pci 0000:00:1c.0: setting latency timer to 64
[    1.318733] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.318738] pci 0000:00:1c.1: setting latency timer to 64
[    1.318749] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.318754] pci 0000:00:1c.3: setting latency timer to 64
[    1.318765] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.318770] pci 0000:00:1c.6: setting latency timer to 64
[    1.318775] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.318777] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.318779] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.318782] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.318784] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.318786] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[    1.318789] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xfeb00000]
[    1.318791] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.318794] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[    1.318796] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.318799] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    1.318801] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf81fffff]
[    1.318803] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[    1.318806] pci_bus 0000:05: resource 0 [io  0x6000-0x6fff]
[    1.318808] pci_bus 0000:05: resource 1 [mem 0xf8400000-0xf84fffff]
[    1.318810] pci_bus 0000:05: resource 2 [mem 0xe0400000-0xe05fffff 64bit pref]
[    1.318813] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    1.318815] pci_bus 0000:06: resource 1 [mem 0xf8200000-0xf83fffff]
[    1.318818] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[    1.318820] pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
[    1.318822] pci_bus 0000:09: resource 1 [mem 0xf8500000-0xf85fffff]
[    1.318825] pci_bus 0000:09: resource 2 [mem 0xe0100000-0xe03fffff pref]
[    1.318853] NET: Registered protocol family 2
[    1.318907] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.319052] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.319294] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.319399] TCP: Hash tables configured (established 131072 bind 65536)
[    1.319402] TCP reno registered
[    1.319404] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.319410] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.319471] NET: Registered protocol family 1
[    1.319492] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.319519] pci 0000:00:1a.0: PCI INT A disabled
[    1.319546] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.319564] pci 0000:00:1d.0: PCI INT A disabled
[    1.319578] pci 0000:01:00.0: Boot video device
[    1.319634] PCI: CLS 64 bytes, default 64
[    1.319640] Simple Boot Flag at 0x36 set to 0x1
[    1.320349] audit: initializing netlink socket (disabled)
[    1.320357] type=2000 audit(1338823796.084:1): initialized
[    1.350471] highmem bounce pool size: 64 pages
[    1.350476] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.359595] VFS: Disk quotas dquot_6.5.2
[    1.359664] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.360193] fuse init (API version 7.17)
[    1.360289] msgmni has been set to 1595
[    1.360653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.360681] io scheduler noop registered
[    1.360683] io scheduler deadline registered
[    1.360690] io scheduler cfq registered (default)
[    1.360795] pcieport 0000:00:01.0: setting latency timer to 64
[    1.360837] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.361120] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.361143] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.361206] intel_idle: MWAIT substates: 0x21120
[    1.361208] intel_idle: v0.4 model 0x2A
[    1.361209] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.361477] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.361848] ACPI: AC Adapter [ACAD] (on-line)
[    1.361925] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.362112] ACPI: Lid Switch [LID]
[    1.362158] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.362163] ACPI: Power Button [PWRB]
[    1.362204] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.362207] ACPI: Sleep Button [SLPB]
[    1.362247] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.362250] ACPI: Power Button [PWRF]
[    1.367516] thermal LNXTHERM:00: registered as thermal_zone0
[    1.367519] ACPI: Thermal Zone [TZ00] (62 C)
[    1.367546] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.367553] ACPI: Battery Slot [BAT1] (battery present)
[    1.367578] ERST: Table is not found!
[    1.367580] GHES: HEST is not enabled!
[    1.367624] isapnp: Scanning for PnP cards...
[    1.367761] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.614146] ACPI: Battery Slot [BAT1] (battery present)
[    1.789124] isapnp: No Plug & Play device found
[    1.813082] Linux agpgart interface v0.103
[    1.814724] brd: module loaded
[    1.815478] loop: module loaded
[    1.815598] ahci 0000:00:1f.2: version 3.0
[    1.815609] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.815658] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.815695] ahci: SSS flag set, parallel bus scan disabled
[    1.828424] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1a impl SATA mode
[    1.828433] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[    1.828444] ahci 0000:00:1f.2: setting latency timer to 64
[    1.844955] scsi0 : ahci
[    1.845036] scsi1 : ahci
[    1.845104] scsi2 : ahci
[    1.845171] scsi3 : ahci
[    1.845237] scsi4 : ahci
[    1.845304] scsi5 : ahci
[    1.845356] ata1: DUMMY
[    1.845359] ata2: SATA max UDMA/133 abar m2048@0xf8806000 port 0xf8806180 irq 41
[    1.845361] ata3: DUMMY
[    1.845364] ata4: SATA max UDMA/133 abar m2048@0xf8806000 port 0xf8806280 irq 41
[    1.845368] ata5: SATA max UDMA/133 abar m2048@0xf8806000 port 0xf8806300 irq 41
[    1.845370] ata6: DUMMY
[    1.845738] Fixed MDIO Bus: probed
[    1.845756] tun: Universal TUN/TAP device driver, 1.6
[    1.845758] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.845804] PPP generic driver version 2.4.2
[    1.845898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.845913] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.845929] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.845933] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.845975] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.846000] ehci_hcd 0000:00:1a.0: debug port 2
[    1.849874] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.849890] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf8807000
[    1.864377] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.864582] hub 1-0:1.0: USB hub found
[    1.864586] hub 1-0:1.0: 3 ports detected
[    1.864652] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.864666] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.864670] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.864718] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.864741] ehci_hcd 0000:00:1d.0: debug port 2
[    1.868638] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.868652] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf8807400
[    1.884369] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.884556] hub 2-0:1.0: USB hub found
[    1.884560] hub 2-0:1.0: 3 ports detected
[    1.884622] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.884634] uhci_hcd: USB Universal Host Controller Interface driver
[    1.884682] usbcore: registered new interface driver libusual
[    1.884726] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2P] at 0x60,0x64 irq 1,12
[    1.888085] i8042: Detected active multiplexing controller, rev 1.1
[    1.889073] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.889079] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.889106] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.889129] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.889152] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.889258] mousedev: PS/2 mouse device common for all mice
[    1.889462] rtc_cmos 00:06: RTC can wake from S4
[    1.889572] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.889601] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.889652] device-mapper: uevent: version 1.0.3
[    1.889723] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.889752] EISA: Probing bus 0 at eisa.0
[    1.889755] EISA: Cannot allocate resource for mainboard
[    1.889757] Cannot allocate resource for EISA slot 1
[    1.889759] Cannot allocate resource for EISA slot 2
[    1.889760] Cannot allocate resource for EISA slot 3
[    1.889762] Cannot allocate resource for EISA slot 4
[    1.889764] Cannot allocate resource for EISA slot 5
[    1.889766] Cannot allocate resource for EISA slot 6
[    1.889767] Cannot allocate resource for EISA slot 7
[    1.889769] Cannot allocate resource for EISA slot 8
[    1.889771] EISA: Detected 0 cards.
[    1.889780] cpufreq-nforce2: No nForce2 chipset.
[    1.890043] cpuidle: using governor ladder
[    1.890465] cpuidle: using governor menu
[    1.890467] EFI Variables Facility v0.08 2004-May-17
[    1.890655] TCP cubic registered
[    1.890778] NET: Registered protocol family 10
[    1.891207] NET: Registered protocol family 17
[    1.891220] Registering the dns_resolver key type
[    1.891236] Using IPI No-Shortcut mode
[    1.891352] PM: Hibernation image not present or could not be loaded.
[    1.891361] registered taskstats version 1
[    1.902536]   Magic number: 0:815:486
[    1.902647] rtc_cmos 00:06: setting system clock to 2012-06-04 15:29:57 UTC (1338823797)
[    1.904755] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.904757] EDD information not available.
[    1.925889] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.164360] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.176362] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.211396] ata2.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
[    2.211399] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.213383] ata2.00: configured for UDMA/100
[    2.213605] scsi 1:0:0:0: Direct-Access     ATA      ST9500325AS      0011 PQ: 0 ANSI: 5
[    2.213760] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.213796] sd 1:0:0:0: [sda] Write Protect is off
[    2.213798] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.213811] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.213816] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    2.264328]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[    2.265286] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.308866] hub 1-1:1.0: USB hub found
[    2.308951] hub 1-1:1.0: 6 ports detected
[    2.316216] Refined TSC clocksource calibration: 1995.465 MHz.
[    2.316219] Switching to clocksource tsc
[    2.420187] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.532189] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.535292] ata4.00: ATAPI: SlimtypeDVD A  DS8A5SH, XL63, max UDMA/100
[    2.536832] ata4.00: configured for UDMA/100
[    2.543107] scsi 3:0:0:0: CD-ROM            Slimtype DVD A  DS8A5SH   XL63 PQ: 0 ANSI: 5
[    2.548674] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.548677] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.548848] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.548975] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.552774] hub 2-1:1.0: USB hub found
[    2.552863] hub 2-1:1.0: 6 ports detected
[    2.824150] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
[    2.868053] ata5: SATA link down (SStatus 0 SControl 300)
[    2.868371] Freeing unused kernel memory: 740k freed
[    2.868578] Write protecting the kernel text: 5828k
[    2.868625] Write protecting the kernel read-only data: 2376k
[    2.868627] NX-protecting the kernel data: 4412k
[    2.882565] udevd[122]: starting version 175
[    2.907470] sdhci: Secure Digital Host Controller Interface driver
[    2.907472] sdhci: Copyright(c) Pierre Ossman
[    2.907798] sdhci-pci 0000:09:00.2: SDHCI controller found [197b:2386] (rev 20)
[    2.907818] sdhci-pci 0000:09:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.907854] sdhci-pci 0000:09:00.2: setting latency timer to 64
[    2.907880] mmc0: no vmmc regulator found
[    2.907917] Registered led device: mmc0::
[    2.908043] tg3.c:v3.121 (November 2, 2011)
[    2.908086] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.908098] tg3 0000:05:00.0: setting latency timer to 64
[    2.908990] mmc0: SDHCI controller on PCI [0000:09:00.2] using DMA
[    2.910099] tg3 mdio bus: probed
[    2.919429] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 60:eb:69:fc:12:35
[    2.919433] tg3 0000:05:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=500:01)
[    2.919435] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.919437] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.992082] usb 2-1.2: new full-speed USB device number 4 using ehci_hcd
[    3.089934] usbcore: registered new interface driver usbhid
[    3.089936] usbhid: USB HID core driver
[    3.160044] usb 2-1.3: new high-speed USB device number 5 using ehci_hcd
[    3.927998] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   16.467060] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.486302] udevd[368]: starting version 175
[   16.521047] cfg80211: Calling CRDA to update world regulatory domain
[   16.523105] Bluetooth: Core ver 2.16
[   16.523122] NET: Registered protocol family 31
[   16.523124] Bluetooth: HCI device and connection manager initialized
[   16.523127] Bluetooth: HCI socket layer initialized
[   16.523129] Bluetooth: L2CAP socket layer initialized
[   16.523134] Bluetooth: SCO socket layer initialized
[   16.523431] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   16.524839] lp: driver loaded but no devices found
[   16.525215] jmb38x_ms 0000:09:00.3: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   16.525225] jmb38x_ms 0000:09:00.3: setting latency timer to 64
[   16.529120] usbcore: registered new interface driver btusb
[   16.535909] ath9k 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.535922] ath9k 0000:03:00.0: setting latency timer to 64
[   16.541527] Linux video capture interface: v2.00
[   16.542159] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0190)
[   16.546479] wmi: Mapper loaded
[   16.564563] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[   16.564605] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
[   16.564662] usbcore: registered new interface driver uvcvideo
[   16.564664] USB Video Class driver (1.1.1)
[   16.567536] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input6
[   16.567718] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:1d.0-1.2:1
[   16.587189] ath: EEPROM regdomain: 0x6a
[   16.587192] ath: EEPROM indicates we should expect a direct regpair map
[   16.587196] ath: Country alpha2 being used: 00
[   16.587198] ath: Regpair used: 0x6a
[   16.587201] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   16.587204] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587207] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   16.587211] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587213] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   16.587217] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587219] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   16.587223] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587225] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   16.587228] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587231] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   16.587234] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587237] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   16.587240] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587243] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   16.587246] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587249] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   16.587252] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587255] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   16.587258] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587260] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   16.587263] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587266] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   16.587269] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587272] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   16.587275] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   16.587278] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   16.588853] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   16.597204] type=1400 audit(1338813012.191:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=472 comm="apparmor_parser"
[   16.597249] type=1400 audit(1338813012.191:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=594 comm="apparmor_parser"
[   16.597391] Adding 6830076k swap on /dev/sda7.  Priority:-1 extents:1 across:6830076k
[   16.597663] type=1400 audit(1338813012.191:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[   16.597671] type=1400 audit(1338813012.191:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=594 comm="apparmor_parser"
[   16.597911] type=1400 audit(1338813012.191:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=594 comm="apparmor_parser"
[   16.597923] type=1400 audit(1338813012.191:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
[   16.598578] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   16.602689] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   16.602806] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   16.602810] Disabling lock debugging due to kernel taint
[   16.603296] Registered led device: ath9k-phy0
[   16.603304] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8560000, irq=16
[   16.607434] acpi device:03: registered as cooling_device8
[   16.607516] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[   16.607636] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   16.609173] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.609181] mei 0000:00:16.0: setting latency timer to 64
[   16.609246] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.621276] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   16.621279] cfg80211: World regulatory domain updated:
[   16.621280] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.621283] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.621285] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.621287] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.621289] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.621291] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.628480] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   16.628544] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.628573] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   16.643904] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[   16.647454] [fglrx] Maximum main memory to use for locked dma buffers: 5832 MBytes.
[   16.647935] [fglrx]   vendor: 1002 device: 68c0 count: 1
[   16.648447] [fglrx] ioport: bar 4, base 0x2000, size: 0x100
[   16.648461] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.648468] pci 0000:01:00.0: setting latency timer to 64
[   16.648716] [fglrx] Kernel PAT support is enabled
[   16.648734] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[   16.681856] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.681926] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.682148] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   16.682229] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[   16.682257] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[   16.697552] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   16.697620] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   17.561343] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input12
[   17.875943] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   18.244488] init: failsafe main process (847) killed by TERM signal
[   18.300646] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04733/0xa40000/0xa0400
[   18.304978] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[   18.304980] vesafb: scrolling: redraw
[   18.304982] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   18.310309] vesafb: framebuffer at 0xd0000000, mapped to 0xf9000000, using 3072k, total 3072k
[   18.310367] fbcon: VESA VGA (fb0) is primary device
[   18.310438] Console: switching to colour frame buffer device 128x48
[   18.310462] fb0: VESA VGA frame buffer device
[   18.346859] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[   18.360739] ppdev: user-space parallel port driver
[   18.386224] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.386227] Bluetooth: BNEP filters: protocol multicast
[   18.386435] Bluetooth: RFCOMM TTY layer initialized
[   18.386441] Bluetooth: RFCOMM socket layer initialized
[   18.386443] Bluetooth: RFCOMM ver 1.11
[   18.391629] type=1400 audit(1338813013.991:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=935 comm="apparmor_parser"
[   18.392124] type=1400 audit(1338813013.991:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=935 comm="apparmor_parser"
[   18.778871] type=1400 audit(1338813014.375:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=975 comm="apparmor_parser"
[   18.779168] type=1400 audit(1338813014.379:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=982 comm="apparmor_parser"
[   18.844576] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.847577] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.849236] tg3 0000:05:00.0: irq 45 for MSI/MSI-X
[   18.872115] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.872457] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.911983] tg3 0000:05:00.0: eth0: Link is down
[   19.489564] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[   19.490453] [fglrx] Firegl kernel thread PID: 1231
[   19.490529] [fglrx] Firegl kernel thread PID: 1232
[   19.490594] [fglrx] Firegl kernel thread PID: 1233
[   19.490731] [fglrx] IRQ 46 Enabled
[   19.812799] [fglrx] Gart USWC size:1280 M.
[   19.812802] [fglrx] Gart cacheable size:508 M.
[   19.812805] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   19.812807] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[   19.812809] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[   21.468817] wlan0: authenticate with 98:fc:11:9b:9c:42 (try 1)
[   21.471709] wlan0: authenticated
[   21.501213] wlan0: associate with 98:fc:11:9b:9c:42 (try 1)
[   21.505376] wlan0: RX AssocResp from 98:fc:11:9b:9c:42 (capab=0x431 status=0 aid=2)
[   21.505380] wlan0: associated
[   21.511895] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.010740] wlan0: no IPv6 routers present
[ 2858.658080] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[ 2858.782335] Initializing USB Mass Storage driver...
[ 2858.782483] scsi6 : usb-storage 1-1.2:1.0
[ 2858.782554] usbcore: registered new interface driver usb-storage
[ 2858.782555] USB Mass Storage support registered.
[ 2858.789726] usbcore: registered new interface driver uas
[ 2859.823881] scsi 6:0:0:0: Direct-Access     SAMSUNG  HM320II               PQ: 0 ANSI: 2 CCS
[ 2859.824973] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2859.825562] sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2859.826707] sd 6:0:0:0: [sdb] Write Protect is off
[ 2859.826710] sd 6:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 2859.827451] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2859.919421]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > sdb4
[ 2859.922918] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2860.992534] kjournald starting.  Commit interval 5 seconds
[ 2860.992619] EXT3-fs (sdb5): warning: maximal mount count reached, running e2fsck is recommended
[ 2860.993211] EXT3-fs (sdb5): using internal journal
[ 2860.993215] EXT3-fs (sdb5): mounted filesystem with ordered data mode

xorg

Kod Seç Genişlet

[    18.753]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    18.753] X Protocol Version 11, Revision 0
[    18.753] Build Operating System: Linux 2.6.24-31-server i686 Ubuntu
[    18.753] Current Operating System: Linux bilgisayar 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686
[    18.753] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic-pae root=UUID=5cdb0d40-c1e9-45cc-a8bb-46a4ff3a0d90 ro quiet splash vt.handoff=7
[    18.753] Build Date: 07 May 2012  11:39:37PM
[    18.753] xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support)
[    18.753] Current version of pixman: 0.24.4
[    18.753] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    18.753] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.753] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun  4 15:30:14 2012
[    18.753] (==) Using config file: "/etc/X11/xorg.conf"
[    18.753] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.753] (==) ServerLayout "aticonfig Layout"
[    18.753] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    18.753] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    18.753] (**) |   |-->Device "aticonfig-Device[0]-0"
[    18.753] (==) Automatically adding devices
[    18.753] (==) Automatically enabling devices
[    18.753] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.753] Entry deleted from font path.
[    18.753] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    18.753] Entry deleted from font path.
[    18.753] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    18.753] Entry deleted from font path.
[    18.753] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    18.753] Entry deleted from font path.
[    18.753] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    18.754] Entry deleted from font path.
[    18.754] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    18.754] Entry deleted from font path.
[    18.754] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    18.754] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    18.754] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.754] (II) Loader magic: 0xb77595a0
[    18.754] (II) Module ABI versions:
[    18.754] X.Org ANSI C Emulation: 0.4
[    18.754] X.Org Video Driver: 11.0
[    18.754] X.Org XInput driver : 16.0
[    18.754] X.Org Server Extension : 6.0
[    18.754] (--) PCI:*(0:1:0:0) 1002:68c0:17aa:3978 rev 0, Mem @ 0xd0000000/268435456, 0xcfee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    18.754] (II) Open ACPI successful (/var/run/acpid.socket)
[    18.754] (II) "extmod" will be loaded by default.
[    18.754] (II) "dbe" will be loaded by default.
[    18.754] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    18.754] (II) "record" will be loaded by default.
[    18.754] (II) "dri" will be loaded by default.
[    18.754] (II) "dri2" will be loaded by default.
[    18.754] (II) LoadModule: "glx"
[    18.755] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
[    18.755] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    18.755] compiled for 6.9.0, module version = 1.0.0
[    18.755] (II) Loading extension GLX
[    18.755] (II) LoadModule: "extmod"
[    18.922] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    18.922] (II) Module extmod: vendor="X.Org Foundation"
[    18.922] compiled for 1.11.3, module version = 1.0.0
[    18.922] Module class: X.Org Server Extension
[    18.922] ABI class: X.Org Server Extension, version 6.0
[    18.922] (II) Loading extension MIT-SCREEN-SAVER
[    18.922] (II) Loading extension XFree86-VidModeExtension
[    18.922] (II) Loading extension XFree86-DGA
[    18.923] (II) Loading extension DPMS
[    18.923] (II) Loading extension XVideo
[    18.923] (II) Loading extension XVideo-MotionCompensation
[    18.923] (II) Loading extension X-Resource
[    18.923] (II) LoadModule: "dbe"
[    18.938] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    18.938] (II) Module dbe: vendor="X.Org Foundation"
[    18.938] compiled for 1.11.3, module version = 1.0.0
[    18.938] Module class: X.Org Server Extension
[    18.938] ABI class: X.Org Server Extension, version 6.0
[    18.938] (II) Loading extension DOUBLE-BUFFER
[    18.938] (II) LoadModule: "record"
[    18.938] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    18.939] (II) Module record: vendor="X.Org Foundation"
[    18.939] compiled for 1.11.3, module version = 1.13.0
[    18.939] Module class: X.Org Server Extension
[    18.939] ABI class: X.Org Server Extension, version 6.0
[    18.939] (II) Loading extension RECORD
[    18.939] (II) LoadModule: "dri"
[    18.939] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    18.939] (II) Module dri: vendor="X.Org Foundation"
[    18.939] compiled for 1.11.3, module version = 1.0.0
[    18.939] ABI class: X.Org Server Extension, version 6.0
[    18.939] (II) Loading extension XFree86-DRI
[    18.939] (II) LoadModule: "dri2"
[    18.939] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    18.939] (II) Module dri2: vendor="X.Org Foundation"
[    18.939] compiled for 1.11.3, module version = 1.2.0
[    18.939] ABI class: X.Org Server Extension, version 6.0
[    18.939] (II) Loading extension DRI2
[    18.939] (II) LoadModule: "fglrx"
[    18.939] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[    18.951] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    18.951] compiled for 1.4.99.906, module version = 8.96.4
[    18.951] Module class: X.Org Video Driver
[    18.951] (II) Loading sub module "fglrxdrm"
[    18.951] (II) LoadModule: "fglrxdrm"
[    18.951] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    18.951] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    18.951] compiled for 1.4.99.906, module version = 8.96.4
[    18.952] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
[    18.952] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7                               
[    18.952] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:47
[    18.952] (++) using VT number 7

[    18.952] (WW) Falling back to old probe method for fglrx
[    18.957] (II) Loading PCS database from /etc/ati/amdpcsdb
[    18.957] (--) Chipset Supported AMD Graphics Processor (0x68C0) found
[    18.958] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    18.958] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    18.958] (II) AMD Video driver is signed
[    18.959] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[    18.959] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    18.959] (II) fglrx(0): pEnt->device->identifier=0xb7b751b0
[    18.959] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[    18.959] (II) Loading sub module "vgahw"
[    18.959] (II) LoadModule: "vgahw"
[    18.959] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    18.959] (II) Module vgahw: vendor="X.Org Foundation"
[    18.959] compiled for 1.11.3, module version = 0.1.0
[    18.959] ABI class: X.Org Video Driver, version 11.0
[    18.959] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    18.959] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    18.959] (==) fglrx(0): Default visual is TrueColor
[    18.959] (**) fglrx(0): Option "UseFastTLS" "0"
[    18.959] (**) fglrx(0): Option "DPMS" "true"
[    18.959] (==) fglrx(0): RGB weight 888
[    18.959] (II) fglrx(0): Using 8 bits per RGB
[    18.959] (==) fglrx(0): Buffer Tiling is ON
[    18.959] (II) Loading sub module "fglrxdrm"
[    18.959] (II) LoadModule: "fglrxdrm"
[    18.959] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    18.959] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    18.959] compiled for 1.4.99.906, module version = 8.96.4
[    18.961] ukiDynamicMajor: found major device number 249
[    18.961] ukiDynamicMajor: found major device number 249
[    18.961] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    18.961] ukiOpenDevice: node name is /dev/ati/card0
[    18.961] ukiOpenDevice: open result is 12, (OK)
[    18.961] ukiOpenByBusid: ukiOpenMinor returns 12
[    18.961] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    18.961] (**) fglrx(0): NoAccel = NO
[    18.961] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    18.961] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5000" (Chipset = 0x68c0)
[    18.961] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x3978)
[    18.961] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    18.961] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    18.961] (--) fglrx(0): MMIO registers at 0xcfee0000
[    18.961] (--) fglrx(0): I/O port at 0x00002000
[    18.961] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    18.962] (II) fglrx(0): AC Adapter is used
[    18.964] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    18.965] (II) Loading sub module "vbe"
[    18.965] (II) LoadModule: "vbe"
[    18.966] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    18.966] (II) Module vbe: vendor="X.Org Foundation"
[    18.966] compiled for 1.11.3, module version = 1.1.0
[    18.966] ABI class: X.Org Video Driver, version 11.0
[    18.966] (II) fglrx(0): VESA BIOS detected
[    18.966] (II) fglrx(0): VESA VBE Version 3.0
[    18.966] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    18.966] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    18.966] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    18.966] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[    18.966] (II) fglrx(0): VESA VBE OEM Product: CAPILANO
[    18.966] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    18.996] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    18.996] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    18.996] (II) fglrx(0): PCIE card detected
[    18.996] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    18.996] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    19.004] (II) fglrx(0): Using adapter: 1:0.0.
[    19.046] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    19.268] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[    19.268] (II) fglrx(0): RandR 1.2 support is enabled!
[    19.268] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    19.268] (==) fglrx(0): Center Mode is disabled
[    19.268] (II) Loading sub module "fb"
[    19.268] (II) LoadModule: "fb"
[    19.268] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.268] (II) Module fb: vendor="X.Org Foundation"
[    19.268] compiled for 1.11.3, module version = 1.0.0
[    19.268] ABI class: X.Org ANSI C Emulation, version 0.4
[    19.268] (II) Loading sub module "ddc"
[    19.268] (II) LoadModule: "ddc"
[    19.268] (II) Module "ddc" already built-in
[    19.582] (II) fglrx(0): Finished Initialize PPLIB!
[    19.582] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    19.582] (II) fglrx(0): Output DFP1 has no monitor section
[    19.582] (II) fglrx(0): Output CRT1 has no monitor section
[    19.583] (II) Loading sub module "ddc"
[    19.583] (II) LoadModule: "ddc"
[    19.583] (II) Module "ddc" already built-in
[    19.583] (II) fglrx(0): Connected Display0: LVDS
[    19.583] (II) fglrx(0): Display0 EDID data ---------------------------
[    19.583] (II) fglrx(0): Manufacturer: LEN  Model: 40b0  Serial#: 0
[    19.583] (II) fglrx(0): Year: 2009  Week: 0
[    19.583] (II) fglrx(0): EDID Version: 1.3
[    19.583] (II) fglrx(0): Digital Display Input
[    19.583] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    19.583] (II) fglrx(0): Gamma: 2.20
[    19.583] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    19.583] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    19.583] (II) fglrx(0): First detailed timing is preferred mode
[    19.583] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    19.583] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    19.583] (II) fglrx(0): Manufacturer's mask: 0
[    19.583] (II) fglrx(0): Supported detailed timing:
[    19.583] (II) fglrx(0): clock: 75.2 MHz   Image Size:  344 x 194 mm
[    19.583] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1558 h_border: 0
[    19.583] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 804 v_border: 0
[    19.583] (II) fglrx(0): Supported detailed timing:
[    19.583] (II) fglrx(0): clock: 58.3 MHz   Image Size:  344 x 194 mm
[    19.583] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1477 h_border: 0
[    19.583] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    19.583] (II) fglrx(0): Unknown vendor-specific block f
[    19.583] (II) fglrx(0):  LTN156AT05J08
[    19.583] (II) fglrx(0): EDID (in hex):
[    19.583] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[    19.583] (II) fglrx(0): 0013010380221378eac8959e57549226
[    19.583] (II) fglrx(0): 0f505400000001010101010101010101
[    19.583] (II) fglrx(0): 0101010101015c1d56c0500024303020
[    19.583] (II) fglrx(0): 250058c210000019ca16566f50001630
[    19.583] (II) fglrx(0): 3020250058c2100000190000000f008c
[    19.583] (II) fglrx(0): 09328c09281609004ca34154000000fe
[    19.583] (II) fglrx(0): 004c544e313536415430354a303800a1
[    19.583] (II) fglrx(0): End of Display0 EDID data --------------------
[    19.584] (II) fglrx(0): EDID for output LVDS
[    19.584] (II) fglrx(0): Manufacturer: LEN  Model: 40b0  Serial#: 0
[    19.584] (II) fglrx(0): Year: 2009  Week: 0
[    19.584] (II) fglrx(0): EDID Version: 1.3
[    19.584] (II) fglrx(0): Digital Display Input
[    19.584] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    19.584] (II) fglrx(0): Gamma: 2.20
[    19.584] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    19.584] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    19.584] (II) fglrx(0): First detailed timing is preferred mode
[    19.584] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    19.584] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    19.584] (II) fglrx(0): Manufacturer's mask: 0
[    19.584] (II) fglrx(0): Supported detailed timing:
[    19.584] (II) fglrx(0): clock: 75.2 MHz   Image Size:  344 x 194 mm
[    19.584] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1558 h_border: 0
[    19.584] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 804 v_border: 0
[    19.584] (II) fglrx(0): Supported detailed timing:
[    19.584] (II) fglrx(0): clock: 58.3 MHz   Image Size:  344 x 194 mm
[    19.584] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1477 h_border: 0
[    19.584] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    19.584] (II) fglrx(0): Unknown vendor-specific block f
[    19.584] (II) fglrx(0):  LTN156AT05J08
[    19.584] (II) fglrx(0): EDID (in hex):
[    19.584] (II) fglrx(0): 00ffffffffffff0030aeb04000000000
[    19.584] (II) fglrx(0): 0013010380221378eac8959e57549226
[    19.584] (II) fglrx(0): 0f505400000001010101010101010101
[    19.584] (II) fglrx(0): 0101010101015c1d56c0500024303020
[    19.584] (II) fglrx(0): 250058c210000019ca16566f50001630
[    19.584] (II) fglrx(0): 3020250058c2100000190000000f008c
[    19.584] (II) fglrx(0): 09328c09281609004ca34154000000fe
[    19.584] (II) fglrx(0): 004c544e313536415430354a303800a1
[    19.584] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[    19.584] (II) fglrx(0): Printing DDC gathered Modelines:
[    19.584] (II) fglrx(0): Modeline "1366x768"x0.0   75.16  1366 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "1366x768"x0.0   58.34  1366 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Printing probed modes for output LVDS
[    19.584] (II) fglrx(0): Modeline "1366x768"x60.0   75.16  1366 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "1366x768"x50.0   58.34  1366 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Modeline "1360x768"x60.0   75.16  1360 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "1360x768"x50.0   58.34  1360 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Modeline "1280x768"x60.0   75.16  1280 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "1280x768"x50.0   58.34  1280 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Modeline "1280x720"x60.0   75.16  1280 1414 1446 1558  720 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "1280x720"x50.0   58.34  1280 1414 1446 1477  720 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Modeline "1024x768"x60.0   75.16  1024 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "1024x768"x50.0   58.34  1024 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Modeline "1024x600"x60.0   75.16  1024 1414 1446 1558  600 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "1024x600"x50.0   58.34  1024 1414 1446 1477  600 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Modeline "800x600"x60.0   75.16  800 1414 1446 1558  600 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "800x600"x50.0   58.34  800 1414 1446 1477  600 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Modeline "800x480"x60.0   75.16  800 1414 1446 1558  480 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "800x480"x50.0   58.34  800 1414 1446 1477  480 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): Modeline "640x480"x60.0   75.16  640 1414 1446 1558  480 770 775 804 -hsync -vsync (48.2 kHz)
[    19.584] (II) fglrx(0): Modeline "640x480"x50.0   58.34  640 1414 1446 1477  480 770 775 790 -hsync -vsync (39.5 kHz)
[    19.584] (II) fglrx(0): EDID for output DFP1
[    19.584] (II) fglrx(0): EDID for output CRT1
[    19.584] (II) fglrx(0): Output LVDS connected
[    19.584] (II) fglrx(0): Output DFP1 disconnected
[    19.584] (II) fglrx(0): Output CRT1 disconnected
[    19.584] (II) fglrx(0): Using exact sizes for initial modes
[    19.584] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    19.584] (II) fglrx(0): Display dimensions: (340, 190) mm
[    19.584] (II) fglrx(0): DPI set to (102, 102)
[    19.584] (II) fglrx(0): Eyefinity capable adapter detected.
[    19.584] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5000 has 6 configurable heads and 1 displays connected.
[    19.584] (==) fglrx(0):  PseudoColor visuals disabled
[    19.584] (II) Loading sub module "ramdac"
[    19.584] (II) LoadModule: "ramdac"
[    19.584] (II) Module "ramdac" already built-in
[    19.584] (==) fglrx(0): NoDRI = NO
[    19.584] (==) fglrx(0): Capabilities: 0x00000000
[    19.584] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    19.584] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    19.584] (**) fglrx(0): UseFastTLS=0
[    19.584] (==) fglrx(0): BlockSignalsOnLock=1
[    19.584] (--) Depth 24 pixmap format is 32 bpp
[    19.589] (II) Loading extension ATIFGLRXDRI
[    19.589] (II) fglrx(0): doing swlDriScreenInit
[    19.589] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    19.589] ukiDynamicMajor: found major device number 249
[    19.589] ukiDynamicMajor: found major device number 249
[    19.589] ukiDynamicMajor: found major device number 249
[    19.589] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    19.589] ukiOpenDevice: node name is /dev/ati/card0
[    19.589] ukiOpenDevice: open result is 17, (OK)
[    19.589] ukiOpenByBusid: ukiOpenMinor returns 17
[    19.589] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    19.589] (II) fglrx(0): [uki] DRM interface version 1.0
[    19.589] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    19.589] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    19.589] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb5f81000
[    19.589] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    19.589] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    19.590] (II) fglrx(0): swlDriScreenInit done
[    19.590] (II) fglrx(0): Kernel Module Version Information:
[    19.590] (II) fglrx(0):     Name: fglrx
[    19.590] (II) fglrx(0):     Version: 8.96.4
[    19.590] (II) fglrx(0):     Date: Mar 12 2012
[    19.590] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    19.590] (II) fglrx(0): Kernel Module version matches driver.
[    19.590] (II) fglrx(0): Kernel Module Build Time Information:
[    19.590] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-24-generic-pae
[    19.590] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    19.590] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    19.590] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    19.590] (II) fglrx(0): [uki] register handle = 0x00004000
[    19.602] (II) fglrx(0): DRI initialization successfull
[    19.602] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    19.602] (==) fglrx(0): Backing store disabled
[    19.602] (II) Loading extension FGLRXEXTENSION
[    19.602] (**) fglrx(0): DPMS enabled
[    19.603] (II) fglrx(0): Initialized in-driver Xinerama extension
[    19.603] (**) fglrx(0): Textured Video is enabled.
[    19.603] (II) LoadModule: "glesx"
[    19.603] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
[    19.604] (II) Module glesx: vendor="X.Org Foundation"
[    19.604] compiled for 1.4.99.906, module version = 1.0.0
[    19.604] (II) Loading extension GLESX
[    19.604] (II) fglrx(0): GLESX enableFlags = 592
[    19.604] (II) fglrx(0): GLESX is enabled
[    19.604] (II) LoadModule: "amdxmm"
[    19.604] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
[    19.604] (II) Module amdxmm: vendor="X.Org Foundation"
[    19.604] compiled for 1.4.99.906, module version = 2.0.0
[    19.613] (II) Loading extension AMDXVOPL
[    19.613] (II) Loading extension AMDXVBA
[    19.613] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[    19.615] (II) fglrx(0): Enable composite support successfully
[    19.615] (WW) fglrx(0): Option "VendorName" is not used
[    19.615] (WW) fglrx(0): Option "ModelName" is not used
[    19.615] (II) fglrx(0): X context handle = 0x1
[    19.615] (II) fglrx(0): [DRI] installation complete
[    19.615] (==) fglrx(0): Silken mouse enabled
[    19.616] (==) fglrx(0): Using HW cursor of display infrastructure!
[    19.616] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    19.616] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    19.616] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    20.552] (--) RandR disabled
[    20.552] (II) Initializing built-in extension Generic Event Extension
[    20.552] (II) Initializing built-in extension SHAPE
[    20.552] (II) Initializing built-in extension MIT-SHM
[    20.552] (II) Initializing built-in extension XInputExtension
[    20.552] (II) Initializing built-in extension XTEST
[    20.552] (II) Initializing built-in extension BIG-REQUESTS
[    20.552] (II) Initializing built-in extension SYNC
[    20.552] (II) Initializing built-in extension XKEYBOARD
[    20.552] (II) Initializing built-in extension XC-MISC
[    20.552] (II) Initializing built-in extension SECURITY
[    20.552] (II) Initializing built-in extension XINERAMA
[    20.552] (II) Initializing built-in extension XFIXES
[    20.552] (II) Initializing built-in extension RENDER
[    20.552] (II) Initializing built-in extension RANDR
[    20.552] (II) Initializing built-in extension COMPOSITE
[    20.552] (II) Initializing built-in extension DAMAGE
[    20.567] ukiDynamicMajor: found major device number 249
[    20.567] ukiDynamicMajor: found major device number 249
[    20.567] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    20.567] ukiOpenDevice: node name is /dev/ati/card0
[    20.567] ukiOpenDevice: open result is 19, (OK)
[    20.567] ukiOpenByBusid: ukiOpenMinor returns 19
[    20.567] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    20.658] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    20.659] (II) fglrx(0): Enable the clock gating!
[    20.659] (II) fglrx(0): Setting screen physical size to 361 x 203
[    20.665] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    20.667] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    20.667] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.667] (II) LoadModule: "evdev"
[    20.667] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.667] (II) Module evdev: vendor="X.Org Foundation"
[    20.667] compiled for 1.11.3, module version = 2.7.0
[    20.667] Module class: X.Org XInput Driver
[    20.667] ABI class: X.Org XInput driver, version 16.0
[    20.667] (II) Using input driver 'evdev' for 'Power Button'
[    20.667] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.667] (**) Power Button: always reports core events
[    20.667] (**) evdev: Power Button: Device: "/dev/input/event3"
[    20.667] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.667] (--) evdev: Power Button: Found keys
[    20.667] (II) evdev: Power Button: Configuring as keyboard
[    20.667] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    20.667] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.667] (**) Option "xkb_rules" "evdev"
[    20.667] (**) Option "xkb_model" "pc105"
[    20.667] (**) Option "xkb_layout" "tr"
[    20.669] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    20.669] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    20.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.669] (II) Using input driver 'evdev' for 'Video Bus'
[    20.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.669] (**) Video Bus: always reports core events
[    20.669] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    20.669] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    20.669] (--) evdev: Video Bus: Found keys
[    20.669] (II) evdev: Video Bus: Configuring as keyboard
[    20.669] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[    20.669] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    20.669] (**) Option "xkb_rules" "evdev"
[    20.669] (**) Option "xkb_model" "pc105"
[    20.669] (**) Option "xkb_layout" "tr"
[    20.670] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.670] (II) Using input driver 'evdev' for 'Power Button'
[    20.670] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.670] (**) Power Button: always reports core events
[    20.670] (**) evdev: Power Button: Device: "/dev/input/event1"
[    20.670] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.670] (--) evdev: Power Button: Found keys
[    20.670] (II) evdev: Power Button: Configuring as keyboard
[    20.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    20.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    20.670] (**) Option "xkb_rules" "evdev"
[    20.670] (**) Option "xkb_model" "pc105"
[    20.670] (**) Option "xkb_layout" "tr"
[    20.670] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    20.670] (II) No input driver specified, ignoring this device.
[    20.670] (II) This device may have been added with another device file.
[    20.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    20.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.671] (II) Using input driver 'evdev' for 'Sleep Button'
[    20.671] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.671] (**) Sleep Button: always reports core events
[    20.671] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    20.671] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    20.671] (--) evdev: Sleep Button: Found keys
[    20.671] (II) evdev: Sleep Button: Configuring as keyboard
[    20.671] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    20.671] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    20.671] (**) Option "xkb_rules" "evdev"
[    20.671] (**) Option "xkb_model" "pc105"
[    20.671] (**) Option "xkb_layout" "tr"
[    20.671] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[    20.671] (II) No input driver specified, ignoring this device.
[    20.671] (II) This device may have been added with another device file.
[    20.671] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    20.671] (II) No input driver specified, ignoring this device.
[    20.671] (II) This device may have been added with another device file.
[    20.672] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    20.672] (II) No input driver specified, ignoring this device.
[    20.672] (II) This device may have been added with another device file.
[    20.672] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:400a (/dev/input/event6)
[    20.672] (**) Logitech Unifying Device. Wireless PID:400a: Applying InputClass "evdev pointer catchall"
[    20.672] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:400a'
[    20.672] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.672] (**) Logitech Unifying Device. Wireless PID:400a: always reports core events
[    20.672] (**) evdev: Logitech Unifying Device. Wireless PID:400a: Device: "/dev/input/event6"
[    20.672] (--) evdev: Logitech Unifying Device. Wireless PID:400a: Vendor 0x46d Product 0xc52b
[    20.672] (--) evdev: Logitech Unifying Device. Wireless PID:400a: Found 20 mouse buttons
[    20.672] (--) evdev: Logitech Unifying Device. Wireless PID:400a: Found scroll wheel(s)
[    20.672] (--) evdev: Logitech Unifying Device. Wireless PID:400a: Found relative axes
[    20.672] (--) evdev: Logitech Unifying Device. Wireless PID:400a: Found x and y relative axes
[    20.672] (II) evdev: Logitech Unifying Device. Wireless PID:400a: Configuring as mouse
[    20.672] (II) evdev: Logitech Unifying Device. Wireless PID:400a: Adding scrollwheel support
[    20.672] (**) evdev: Logitech Unifying Device. Wireless PID:400a: YAxisMapping: buttons 4 and 5
[    20.672] (**) evdev: Logitech Unifying Device. Wireless PID:400a: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.672] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input6/event6"
[    20.672] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:400a" (type: MOUSE, id 10)
[    20.672] (II) evdev: Logitech Unifying Device. Wireless PID:400a: initialized for relative axes.
[    20.672] (**) Logitech Unifying Device. Wireless PID:400a: (accel) keeping acceleration scheme 1
[    20.672] (**) Logitech Unifying Device. Wireless PID:400a: (accel) acceleration profile 0
[    20.672] (**) Logitech Unifying Device. Wireless PID:400a: (accel) acceleration factor: 2.000
[    20.672] (**) Logitech Unifying Device. Wireless PID:400a: (accel) acceleration threshold: 4
[    20.672] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:400a (/dev/input/mouse0)
[    20.672] (II) No input driver specified, ignoring this device.
[    20.672] (II) This device may have been added with another device file.
[    20.673] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event5)
[    20.673] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[    20.673] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[    20.673] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.673] (**) Lenovo EasyCamera: always reports core events
[    20.673] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event5"
[    20.673] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x190
[    20.673] (--) evdev: Lenovo EasyCamera: Found keys
[    20.673] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[    20.673] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5/event5"
[    20.673] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[    20.673] (**) Option "xkb_rules" "evdev"
[    20.673] (**) Option "xkb_model" "pc105"
[    20.673] (**) Option "xkb_layout" "tr"
[    20.673] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    20.673] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.673] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.673] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.673] (**) AT Translated Set 2 keyboard: always reports core events
[    20.673] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    20.673] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    20.673] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    20.673] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    20.673] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    20.673] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    20.673] (**) Option "xkb_rules" "evdev"
[    20.673] (**) Option "xkb_model" "pc105"
[    20.673] (**) Option "xkb_layout" "tr"
[    20.674] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event12)
[    20.674] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[    20.674] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[    20.674] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.674] (**) PS/2 Generic Mouse: always reports core events
[    20.674] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event12"
[    20.674] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[    20.674] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[    20.674] (--) evdev: PS/2 Generic Mouse: Found relative axes
[    20.674] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[    20.674] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[    20.674] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[    20.674] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.674] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event12"
[    20.674] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 13)
[    20.674] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[    20.674] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[    20.674] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[    20.674] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[    20.674] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[    20.674] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[    20.674] (II) No input driver specified, ignoring this device.
[    20.674] (II) This device may have been added with another device file.
[    20.674] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[    20.674] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    20.674] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    20.674] (II) LoadModule: "synaptics"
[    20.675] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    20.675] (II) Module synaptics: vendor="X.Org Foundation"
[    20.675] compiled for 1.11.3, module version = 1.6.0
[    20.675] Module class: X.Org XInput Driver
[    20.675] ABI class: X.Org XInput driver, version 16.0
[    20.675] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    20.675] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    20.675] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    20.675] (**) Option "Device" "/dev/input/event13"
[    20.868] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    20.868] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5512
[    20.868] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4714
[    20.868] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    20.868] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    20.868] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    20.868] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    20.868] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    20.868] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    20.924] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event13"
[    20.924] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    20.924] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    20.924] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    20.924] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[    20.924] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    20.924] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    20.924] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    20.924] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    20.924] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    20.924] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[    20.924] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    20.924] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[    20.924] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    20.924] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    20.924] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.924] (**) Ideapad extra buttons: always reports core events
[    20.924] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event8"
[    20.924] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    20.924] (--) evdev: Ideapad extra buttons: Found keys
[    20.924] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    20.924] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input8/event8"
[    20.924] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[    20.924] (**) Option "xkb_rules" "evdev"
[    20.924] (**) Option "xkb_model" "pc105"
[    20.924] (**) Option "xkb_layout" "tr"
[    20.950] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    21.535] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[    21.535] (II) fglrx(0): Printing DDC gathered Modelines:
[    21.535] (II) fglrx(0): Modeline "1366x768"x0.0   75.16  1366 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    21.535] (II) fglrx(0): Modeline "1366x768"x0.0   58.34  1366 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    24.780] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[    24.780] (II) fglrx(0): Printing DDC gathered Modelines:
[    24.780] (II) fglrx(0): Modeline "1366x768"x0.0   75.16  1366 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    24.780] (II) fglrx(0): Modeline "1366x768"x0.0   58.34  1366 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    29.569] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[    29.569] (II) fglrx(0): Printing DDC gathered Modelines:
[    29.569] (II) fglrx(0): Modeline "1366x768"x0.0   75.16  1366 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    29.569] (II) fglrx(0): Modeline "1366x768"x0.0   58.34  1366 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    29.686] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[    29.686] (II) fglrx(0): Printing DDC gathered Modelines:
[    29.686] (II) fglrx(0): Modeline "1366x768"x0.0   75.16  1366 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    29.686] (II) fglrx(0): Modeline "1366x768"x0.0   58.34  1366 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    29.888] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[    29.888] (II) fglrx(0): Printing DDC gathered Modelines:
[    29.888] (II) fglrx(0): Modeline "1366x768"x0.0   75.16  1366 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    29.888] (II) fglrx(0): Modeline "1366x768"x0.0   58.34  1366 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)
[    31.335] (II) XKB: reuse xkmfile /var/lib/xkb/server-87DDB6A793DBAF5A4545DD8CE8B652AB184C55F8.xkm
[    49.921] (II) fglrx(0): EDID vendor "LEN", prod id 16560
[    49.921] (II) fglrx(0): Printing DDC gathered Modelines:
[    49.921] (II) fglrx(0): Modeline "1366x768"x0.0   75.16  1366 1414 1446 1558  768 770 775 804 -hsync -vsync (48.2 kHz)
[    49.921] (II) fglrx(0): Modeline "1366x768"x0.0   58.34  1366 1414 1446 1477  768 770 775 790 -hsync -vsync (39.5 kHz)

[if]

@osmancık, görebildiğim bir sorun yok. Sürücüler güzel güzel kurulmuş. Aramalarımda da böyle bir soruna rastlamadım. Şöyle yapalım, başlangıç uygulamalarından kullanmadığınız uygulamaları kaldırın.

Kod Seç Genişlet

sudo sed -i 's/NoDisplay=true/NoDisplay=false/' /etc/xdg/autostart/*.desktop komutunu verdikten sonra tüm başlangıç uygulamaları görünür olur. Sonra

Kod Seç Genişlet

sudo apt-get install cpufrequtils
sudo modprobe acpi-cpufreq
sudo modprobe cpufreq_ondemand
sudo  cpufreq-set -c 0 -g ondemand komutlarını verin ve bilgisayarı yeniden başlatın.

[osmancık]

Kullanmadığım uygulamayı başlangıçtan kaldırmak için /etc/xdg/autostart içinden dosya mı silmem gerekiyor?

[if]

@osmancık, o şekilde de yapabilirsiniz ama silme işlemi yerine taşıma yapmanız daha iyi. Misal

Kod Seç Genişlet

sudo mv bir_belge.desktop bir_belgeBunun yerine sağ üst köşede bulunan çark simgesine tıklayın> başlangıç uygulamalarını seçin ve orada kaldırınız. Misal Ubuntu One.

[osmancık]

Açılış uygulama tercihlerinden Gnome Ayar Servisi dışında herşeyi iptal ettim ve verdiğiniz komutları çalıştırıp bilgisayarı yeniden başlattım ama yine takılmalar devam ediyor.

[if]

@osmancık, 64 bit Ubuntu kurmuş muydunuz?

[osmancık]

Yok hayır. Şuan kurulu olan 32 bit. 64 mü kurayım?

[if]

@osmancık, benzer bir sorun bulamadım. Çıktılarda da sorun göremeyince 64 bit denemek geldi aklıma.

[osmancık]

Kurdum 64 bit. Bir fark yok, youtube de bir video bile takılmadan gösteremiyor. Var mı yapılabilecek bişey?

[if]

@osmancık, şu durumda size yardımcı olabileceğim tek konu Launchpad'de bir hata kaydı açmak olur. Ben açma taraftarıyım.

[decent]

Kurdum 64 bit. Bir fark yok, youtube de bir video bile takılmadan gösteremiyor. Var mı yapılabilecek bişey?

Çıktıları aktarmadan ezbere gitmemiz zor.
Öncelikle konumuz ekran kartı sürücüsü tam yüklenmiş mi ona bakmamız gerek.
Youtube ikinci planda bakacağımız bir sorundur ve forumumuzda youtube ile ilgili çok sayıda konu açılarak çözülmüştür.
Youtube için çözücüler (codecs) flash ve diğer gereksinimler tam mıdır ?

[osmancık]

@decent youtube u örnek olsun diye söyledim flash player yüklü ancak mesele bu değil diye düşünüyorum çünkü mesela bu sayfanın en üst tarafından en altına doğru kaydırıyorum en az 2 defa takılıyor akıcı bir şekilde kaydıramıyor, şuan bu yazıyı yazarken takılmalar oluyor vs. bunun gibi sistem genelinde donmalar var. Ekran kartı sürücüsü ile alakalı hangi komutları istiyorsanız yürüteyim. Şuan 64 bit 12.04 yüklü durumda ve jockey ile sürücüyü yükledim. Sonra da gerekirse @if in dediği gibi hata kaydı açayım.

[heartsmagic]

Peki konuyu baştan beri takip etmiyorum ama şunları sormak istiyorum.

1. ATI sürücülerini kurmadan da bu sorun oluyor mu?
2. Unity3B yerine 2B ile deneme yapılmış mıydı?
3. Catalyst üzerinde bazı şeyler vardı değiştirilebilen. ATI kullanıcısı olmadığım için çok detay veremiyorum ne yazı ki ancak bu değişiklikler denendi mi?
4. Eğer sorun 3B'de ise Compiz üzerindeki Sync to VBlank özelliği kapatılıp denenmiş miydi?

[osmancık]

1. Sürücü kurmadan da sorun oluyor.
2. Açılışta şifre yazılan yerde Ubuntu 2D seçeneğini seçtim durum aynı.
3. Catalyst çoğu zaman açılmıyor, sorunu bildir penceresi geliyor. Açılsa da benim ekran kartım hakkında bir bilgi vermiyor(model vs.). Dolayısıyla kartı tanımadığını düşünüyorum.
4. Compizle ilgili hiçbir işlem yapmadım.

[if]

@osmancık,

Kod Seç Genişlet

sudo apt-get install compizconfig-settings-manager
ccsm


Compiz ayar yöneticisi>Genel>OpenGL>"Sync to Vblank"

[heartsmagic]

Catalyst için LC_ALL=C kullanıyor musun?

Eğer sürücüler kuruluyken değilken, Unity3B ile 2B ile de yani her türlü sorun yaşanıyorsa yanlış sularda geziyor da olabiliriz. İlla sorun grafik kartı olmayabilir. Bu bir dizüstü mü, marka ve modeli nedir eğer öyleyse.

[osmancık]

@if, Sync to Vblank işaretli idi, işareti kaldırdım. Bir değişiklik yok.
@heartsmagic, dizüstü lenovo ideapad y560p. Yalnız bu modelin çok değişik türleri var. Ben aşağıya lshw çıktısını vereyim. Bu çıktıda dikkatimi çeken "UNCLAIMED" olarak işaretli aygıtlar var. Özellikle de SMBus denen şey dikkatimi çekti.

[heartsmagic]

Makine üzerinden de bir şey çıkmıyor. Tek görebildiğim senin açtığın hata kaydı. Canlı CD ile durum nasıldı onu hatırlıyor musun?

[osmancık]

@heartsmagic Bundan önceki mesajıma catalyst le ilgili bişey ekledim onu gördünüz mü? Kurulumu usb bellek ile yapmıştım kurulum sırasında ubuntu hakkında bilgiler veren, oklarla sağa sola kaydırılan resimler vardı. Onları kaydırırken bozulmalar oluyordu onu hatırlıyorum. İsterseniz usb ile başlatıp bakabilirim?


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 05 Haziran 2012 - 23:40:28
Suan usb bellekten actim ubuntu 12.04 64 bit. Aynen sorunlu bu da.

[heartsmagic]

Sürücüler bile devrede değilken bu sorunun olması cidden çok garip, bir garip davranıyor sistem. Catalyst eklemesini henüz gördüm, benim de söylemek istediğim buydu. O ayarlar arasında bir iki ayar var ki ATI sahibi arkadaşlar değiştiriyorlardı. Şimdi ben ne söylesem yalan olur. Onlardan biri tavsiye verirse çok sevinirim.

[decent]

ATI Kontrol Merkezini bu komutla değil;

Kod Seç Genişlet

sudo LC_ALL=C amdcccle

Normal kullanıcı olarak bu şekilde çalıştırmalısın:

Kod Seç Genişlet

env LC_ALL=C amdcccle