[Çözüldü] VIA VT1705 ses yok

if · 04 Haziran 2012 - 12:55:08

dmesg tam çıkmamış.

dmesg > dmesg.log olarak veriniz komutu ve dmesg.log içeriğini pastebin.com'a yapıtırın, kaydedin ve bağlantıyı buraya geçin.

Kod Seç

snd-hda-intel.enable_msi=1 parametresi ile başlatınca ses var mı? Bu parametre ile başlatmak için: http://forum.ubuntu-tr.net/index.php?topic=31554.0

UmutK · 04 Haziran 2012 - 13:07:18

Alıntı yapılan: if - 04 Haziran 2012 - 12:55:08
dmesg tam çıkmamış.
Kod Seç Genişlet
dmesg > dmesg.log olarak veriniz komutu ve dmesg.log içeriğini pastebin.com'a yapıtırın, kaydedin ve bağlantıyı buraya geçin.

Kod Seç Genişlet
snd-hda-intel.enable_msi=1 parametresi ile başlatınca ses var mı? Bu parametre ile başlatmak için: http://forum.ubuntu-tr.net/index.php?topic=31554.0

Kod Seç

sudo pluma /var/log/dmesg

komutuyla tamamını aldım sanırım

Kod Seç

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=5fc308fe-6eed-453a-acd1-608c4f321f3c ro quiet splash pci=use_crs vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: ECS MCP61M-M3/MCP61M-M3, BIOS 080015  11/03/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000230000000 aka 8960M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcffc0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000cffc0000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cffc0000 page 4k
[    0.000000] kernel direct mapping tables up to cffc0000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[    0.000000]  0100000000 - 0200000000 page 1G
[    0.000000]  0200000000 - 0230000000 page 2M
[    0.000000] kernel direct mapping tables up to 230000000 @ cffbe000-cffc0000
[    0.000000] RAMDISK: 364ea000 - 3726d000
[    0.000000] ACPI: RSDP 00000000000faee0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cffc0000 00044 (v01 110310 RSDT1147 20101103 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cffc0200 00084 (v01 110310 FACP1147 20101103 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cffc04b0 0498A (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cffce000 00040
[    0.000000] ACPI: APIC 00000000cffc0390 00090 (v01 110310 APIC1147 20101103 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cffc0420 0003C (v01 110310 OEMMCFG  20101103 MSFT 00000097)
[    0.000000] ACPI: WDRT 00000000cffc0460 00047 (v01 110310 NV-WDRT  20101103 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cffce040 00072 (v01 110310 OEMB1147 20101103 MSFT 00000097)
[    0.000000] ACPI: SRAT 00000000cffc4e40 000E8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: HPET 00000000cffc4f30 00038 (v01 110310 OEMHPET0 20101103 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cffc4f70 0088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[    0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[    0.000000] NUMA: Node 0 [0,d0000000) + [100000000,230000000) -> [0,230000000)
[    0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[    0.000000]   NODE_DATA [000000022fffb000 - 000000022fffffff]
[    0.000000]  [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00230000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cffc0
[    0.000000]     0: 0x00100000 -> 0x00230000
[    0.000000] On node 0 totalpages: 2096975
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 831488 pages, LIFO batch:31
[    0.000000]   Normal zone: 19456 pages used for memmap
[    0.000000]   Normal zone: 1225728 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000
[    0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u262144
[    0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2061130
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=5fc308fe-6eed-453a-acd1-608c4f321f3c ro quiet splash pci=use_crs vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c4000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[    0.000000] Memory: 8094904k/9175040k available (6566k kernel code, 787140k absent, 292996k reserved, 6637k data, 920k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:728 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3013.409 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.81 BogoMIPS (lpj=12053636)
[    0.004007] pid_max: default: 32768 minimum: 301
[    0.004026] Security Framework initialized
[    0.004038] AppArmor: AppArmor initialized
[    0.004039] Yama: becoming mindful.
[    0.008216] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010515] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.011530] Mount-cache hash table entries: 256
[    0.011634] Initializing cgroup subsys cpuacct
[    0.011639] Initializing cgroup subsys memory
[    0.011646] Initializing cgroup subsys devices
[    0.011648] Initializing cgroup subsys freezer
[    0.011649] Initializing cgroup subsys blkio
[    0.011654] Initializing cgroup subsys perf_event
[    0.011677] tseg: 0000000000
[    0.011688] CPU: Physical Processor ID: 0
[    0.011689] CPU: Processor Core ID: 0
[    0.011691] mce: CPU supports 6 MCE banks
[    0.012905] ACPI: Core revision 20110623
[    0.014990] ftrace: allocating 27049 entries in 107 pages
[    0.016761] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057216] CPU0: AMD Athlon(tm) II X4 640 Processor stepping 03
[    0.060003] Performance Events: AMD PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      4
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1
[    0.060003] smpboot cpu 1: start_ip = 9a000
[    0.148008] TSC synchronization [CPU#0 -> CPU#1]:
[    0.148008] Measured 37568423373 cycles TSC warp between CPUs, turning off TSC clock.
[    0.148008] Marking TSC unstable due to check_tsc_sync_source failed
[    0.148023] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148088]  #2
[    0.148089] smpboot cpu 2: start_ip = 9a000
[    0.236086] NMI watchdog enabled, takes one hw-pmu counter.
[    0.236142]  #3
[    0.236143] smpboot cpu 3: start_ip = 9a000
[    0.324141] NMI watchdog enabled, takes one hw-pmu counter.
[    0.324156] Brought up 4 CPUs
[    0.324158] Total of 4 processors activated (24108.96 BogoMIPS).
[    0.324867] devtmpfs: initialized
[    0.325213] EVM: security.selinux
[    0.325215] EVM: security.SMACK64
[    0.325216] EVM: security.capability
[    0.325339] PM: Registering ACPI NVS region at cffce000 (139264 bytes)
[    0.325339] print_constraints: dummy: 
[    0.325339] RTC time:  8:40:23, date: 06/04/12
[    0.325339] NET: Registered protocol family 16
[    0.325339] node 0 link 0: io port [1000, ffffff]
[    0.325339] TOM: 00000000d0000000 aka 3328M
[    0.325339] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.325339] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.325339] node 0 link 0: mmio [a0000, bffff]
[    0.325339] node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [f0000000, fe0bffff]
[    0.325339] TOM2: 0000000230000000 aka 8960M
[    0.325339] bus: [00, 07] on node 0 link 0
[    0.325339] bus: 00 index 0 [io  0x0000-0xffff]
[    0.325339] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.325339] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[    0.325339] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[    0.325339] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[    0.325339] Extended Config Space enabled on 1 nodes
[    0.325339] ACPI: bus type pci registered
[    0.325339] Trying to unpack rootfs image as initramfs...
[    0.325339] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.325339] PCI: not using MMCONFIG
[    0.325339] PCI: Using configuration type 1 for base access
[    0.325339] PCI: Using configuration type 1 for extended access
[    0.328274] bio: create slab <bio-0> at 0
[    0.328274] ACPI: Added _OSI(Module Device)
[    0.328274] ACPI: Added _OSI(Processor Device)
[    0.328274] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.328274] ACPI: Added _OSI(Processor Aggregator Device)
[    0.328749] ACPI: EC: Look up EC in DSDT
[    0.329478] ACPI: Executed 1 blocks of module-level executable AML code
[    0.330920] ACPI: Interpreter enabled
[    0.330923] ACPI: (supports S0 S3 S4 S5)
[    0.330935] ACPI: Using IOAPIC for interrupt routing
[    0.330951] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.332221] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.353136] ACPI: No dock devices found.
[    0.353139] HEST: Table not found.
[    0.353142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.353271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.353384] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.353386] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.353388] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.353389] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.353391] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[    0.353393] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[    0.353418] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
[    0.353617] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
[    0.353626] pci 0000:00:01.0: reg 10: [io  0x4f00-0x4fff]
[    0.353677] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[    0.353692] pci 0000:00:01.1: reg 10: [io  0x4900-0x493f]
[    0.353715] pci 0000:00:01.1: reg 20: [io  0x4d00-0x4d3f]
[    0.353722] pci 0000:00:01.1: reg 24: [io  0x4e00-0x4e3f]
[    0.353758] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.353764] pci 0000:00:01.1: PME# disabled
[    0.353776] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[    0.353837] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[    0.353850] pci 0000:00:02.0: reg 10: [mem 0xfde7f000-0xfde7ffff]
[    0.353902] pci 0000:00:02.0: supports D1 D2
[    0.353904] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.353907] pci 0000:00:02.0: PME# disabled
[    0.353921] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[    0.353935] pci 0000:00:02.1: reg 10: [mem 0xfde7ec00-0xfde7ecff]
[    0.353998] pci 0000:00:02.1: supports D1 D2
[    0.353999] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.354003] pci 0000:00:02.1: PME# disabled
[    0.354026] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[    0.354090] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
[    0.354105] pci 0000:00:05.0: reg 10: [mem 0xfde78000-0xfde7bfff]
[    0.354169] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.354173] pci 0000:00:05.0: PME# disabled
[    0.354196] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[    0.354229] pci 0000:00:06.0: reg 20: [io  0xffa0-0xffaf]
[    0.354275] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[    0.354290] pci 0000:00:07.0: reg 10: [mem 0xfde7d000-0xfde7dfff]
[    0.354297] pci 0000:00:07.0: reg 14: [io  0xd480-0xd487]
[    0.354359] pci 0000:00:07.0: supports D1 D2
[    0.354360] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.354365] pci 0000:00:07.0: PME# disabled
[    0.354383] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[    0.354397] pci 0000:00:08.0: reg 10: [io  0xd400-0xd407]
[    0.354404] pci 0000:00:08.0: reg 14: [io  0xd080-0xd083]
[    0.354411] pci 0000:00:08.0: reg 18: [io  0xd000-0xd007]
[    0.354418] pci 0000:00:08.0: reg 1c: [io  0xcc00-0xcc03]
[    0.354424] pci 0000:00:08.0: reg 20: [io  0xc880-0xc88f]
[    0.354431] pci 0000:00:08.0: reg 24: [mem 0xfde7c000-0xfde7cfff]
[    0.354482] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
[    0.354496] pci 0000:00:08.1: reg 10: [io  0xc800-0xc807]
[    0.354503] pci 0000:00:08.1: reg 14: [io  0xc480-0xc483]
[    0.354510] pci 0000:00:08.1: reg 18: [io  0xc400-0xc407]
[    0.354516] pci 0000:00:08.1: reg 1c: [io  0xc080-0xc083]
[    0.354523] pci 0000:00:08.1: reg 20: [io  0xc000-0xc00f]
[    0.354530] pci 0000:00:08.1: reg 24: [mem 0xfde77000-0xfde77fff]
[    0.354589] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[    0.354639] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.354642] pci 0000:00:09.0: PME# disabled
[    0.354664] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[    0.354714] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.354716] pci 0000:00:0b.0: PME# disabled
[    0.354737] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[    0.354786] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.354789] pci 0000:00:0c.0: PME# disabled
[    0.354815] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.354832] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.354843] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.354854] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.354868] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.354943] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.354950] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.354952] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.354954] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.354956] pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.354958] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[    0.354960] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.355006] pci 0000:02:00.0: [1002:68f9] type 0 class 0x000300
[    0.355022] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.355035] pci 0000:02:00.0: reg 18: [mem 0xfdfe0000-0xfdffffff 64bit]
[    0.355043] pci 0000:02:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.355059] pci 0000:02:00.0: reg 30: [mem 0xfdfc0000-0xfdfdffff pref]
[    0.355096] pci 0000:02:00.0: supports D1 D2
[    0.355121] pci 0000:02:00.1: [1002:aa68] type 0 class 0x000403
[    0.355137] pci 0000:02:00.1: reg 10: [mem 0xfdfbc000-0xfdfbffff 64bit]
[    0.355208] pci 0000:02:00.1: supports D1 D2
[    0.360052] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.360058] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.360062] pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.360066] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.360107] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.360148] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.360153] pci 0000:00:0c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
[    0.360173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.360274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.360305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.360324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.360343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.360429]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.360525]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.363367] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.363431] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.363494] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.363554] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.363615] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *5
[    0.363675] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.363734] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.363796] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.363857] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.363918] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.363979] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.364066] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
[    0.364128] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.364195] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.364256] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[    0.364321] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[    0.364384] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[    0.364452] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.364545] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.364545] vgaarb: loaded
[    0.364545] vgaarb: bridge control possible 0000:02:00.0
[    0.364545] i2c-core: driver [aat2870] using legacy suspend method
[    0.364545] i2c-core: driver [aat2870] using legacy resume method
[    0.364545] SCSI subsystem initialized
[    0.364545] libata version 3.00 loaded.
[    0.364545] usbcore: registered new interface driver usbfs
[    0.364545] usbcore: registered new interface driver hub
[    0.364545] usbcore: registered new device driver usb
[    0.364545] PCI: Using ACPI for IRQ routing
[    0.373786] PCI: pci_cache_line_size set to 64 bytes
[    0.373845] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
[    0.373847] reserve RAM buffer: 00000000cffc0000 - 00000000cfffffff 
[    0.373926] NetLabel: Initializing
[    0.373927] NetLabel:  domain hash size = 128
[    0.373928] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.373936] NetLabel:  unlabeled traffic allowed by default
[    0.373979] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.373979] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.373979] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.388184] Switching to clocksource hpet
[    0.393255] AppArmor: AppArmor Filesystem Enabled
[    0.393280] pnp: PnP ACPI init
[    0.393293] ACPI: bus type pnp registered
[    0.393380] pnp 00:00: [bus 00-ff]
[    0.393382] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.393384] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.393386] pnp 00:00: [io  0x0d00-0xffff window]
[    0.393387] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.393389] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.393391] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[    0.393392] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.393442] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.393461] pnp 00:01: [dma 4]
[    0.393462] pnp 00:01: [io  0x0000-0x000f]
[    0.393465] pnp 00:01: [io  0x0081-0x0083]
[    0.393467] pnp 00:01: [io  0x0087]
[    0.393468] pnp 00:01: [io  0x0089-0x008b]
[    0.393469] pnp 00:01: [io  0x008f]
[    0.393470] pnp 00:01: [io  0x00c0-0x00df]
[    0.393486] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.393493] pnp 00:02: [io  0x0070-0x0071]
[    0.393507] pnp 00:02: [irq 8]
[    0.393522] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.393528] pnp 00:03: [io  0x0061]
[    0.393543] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.393549] pnp 00:04: [io  0x00f0-0x00ff]
[    0.393558] pnp 00:04: [irq 13]
[    0.393572] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.393748] pnp 00:05: [io  0x03f8-0x03ff]
[    0.393757] pnp 00:05: [irq 4]
[    0.393758] pnp 00:05: [dma 0 disabled]
[    0.393799] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.394058] pnp 00:06: [io  0x03f0-0x03f5]
[    0.394059] pnp 00:06: [io  0x03f7]
[    0.394068] pnp 00:06: [irq 6]
[    0.394069] pnp 00:06: [dma 2]
[    0.394107] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.394345] pnp 00:07: [io  0x0378-0x037f]
[    0.394347] pnp 00:07: [io  0x0778-0x077f]
[    0.394355] pnp 00:07: [irq 7]
[    0.394357] pnp 00:07: [dma 3]
[    0.394444] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.394651] pnp 00:08: [mem 0x000d0000-0x000d3fff window]
[    0.394653] pnp 00:08: [mem 0x000d4000-0x000d7fff window]
[    0.394655] pnp 00:08: [mem 0x000de000-0x000dffff window]
[    0.394656] pnp 00:08: [io  0x0010-0x001f]
[    0.394658] pnp 00:08: [io  0x0022-0x003f]
[    0.394659] pnp 00:08: [io  0x0044-0x004d]
[    0.394660] pnp 00:08: [io  0x0050-0x005f]
[    0.394662] pnp 00:08: [io  0x0062-0x0063]
[    0.394663] pnp 00:08: [io  0x0065-0x006f]
[    0.394664] pnp 00:08: [io  0x0072-0x007f]
[    0.394665] pnp 00:08: [io  0x0080]
[    0.394667] pnp 00:08: [io  0x0084-0x0086]
[    0.394668] pnp 00:08: [io  0x0088]
[    0.394669] pnp 00:08: [io  0x008c-0x008e]
[    0.394670] pnp 00:08: [io  0x0090-0x009f]
[    0.394672] pnp 00:08: [io  0x00a2-0x00bf]
[    0.394673] pnp 00:08: [io  0x00e0-0x00ef]
[    0.394674] pnp 00:08: [io  0x04d0-0x04d1]
[    0.394675] pnp 00:08: [io  0x0800-0x080f]
[    0.394677] pnp 00:08: [io  0x4000-0x407f]
[    0.394680] pnp 00:08: [io  0x4080-0x40ff]
[    0.394681] pnp 00:08: [io  0x4400-0x447f]
[    0.394682] pnp 00:08: [io  0x4480-0x44ff]
[    0.394684] pnp 00:08: [io  0x4800-0x487f]
[    0.394685] pnp 00:08: [io  0x4880-0x48ff]
[    0.394686] pnp 00:08: [io  0x4c00-0x4c7f]
[    0.394687] pnp 00:08: [io  0x4c80-0x4cff]
[    0.394689] pnp 00:08: [mem 0xfec80000-0x1fd93ffff]
[    0.394691] pnp 00:08: [mem 0xfefe0000-0xfefe01ff]
[    0.394692] pnp 00:08: [mem 0xfefe1000-0xfefe1fff]
[    0.394693] pnp 00:08: [mem 0xfee01000-0xfeefffff]
[    0.394695] pnp 00:08: [mem 0xffb80000-0xffffffff]
[    0.394757] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.394759] system 00:08: [io  0x0800-0x080f] has been reserved
[    0.394761] system 00:08: [io  0x4000-0x407f] has been reserved
[    0.394765] system 00:08: [io  0x4080-0x40ff] has been reserved
[    0.394766] system 00:08: [io  0x4400-0x447f] has been reserved
[    0.394768] system 00:08: [io  0x4480-0x44ff] has been reserved
[    0.394770] system 00:08: [io  0x4800-0x487f] has been reserved
[    0.394772] system 00:08: [io  0x4880-0x48ff] has been reserved
[    0.394774] system 00:08: [io  0x4c00-0x4c7f] has been reserved
[    0.394776] system 00:08: [io  0x4c80-0x4cff] has been reserved
[    0.394778] system 00:08: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.394780] system 00:08: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.394784] system 00:08: [mem 0x000de000-0x000dffff window] has been reserved
[    0.394787] system 00:08: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[    0.394789] system 00:08: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.394791] system 00:08: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.394793] system 00:08: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.394795] system 00:08: [mem 0xffb80000-0xffffffff] could not be reserved
[    0.394797] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.394834] pnp 00:09: [mem 0xfeff0000-0xfeff0fff]
[    0.394853] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.394901] pnp 00:0a: [io  0x0060]
[    0.394902] pnp 00:0a: [io  0x0064]
[    0.394903] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.394905] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.394932] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.394934] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.394937] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.395006] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
[    0.395007] pnp 00:0b: [io  0x0a00-0x0adf]
[    0.395008] pnp 00:0b: [io  0x0ae0-0x0aef]
[    0.395034] system 00:0b: [io  0x0a00-0x0adf] has been reserved
[    0.395036] system 00:0b: [io  0x0ae0-0x0aef] has been reserved
[    0.395038] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.395065] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    0.395092] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.395094] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.395182] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.395184] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[    0.395185] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    0.395187] pnp 00:0d: [mem 0x00100000-0xcfffffff]
[    0.395188] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[    0.395222] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.395224] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.395226] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.395228] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.395230] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.395232] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.395406] pnp: PnP ACPI: found 14 devices
[    0.395408] ACPI: ACPI bus type pnp unregistered
[    0.402214] PCI: max bus depth: 1 pci_try_num: 2
[    0.402237] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.402246] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[    0.402249] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.402252] pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.402255] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.402259] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[    0.402266] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[    0.402269] pci 0000:00:0c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
[    0.402280] pci 0000:00:04.0: setting latency timer to 64
[    0.402285] pci 0000:00:09.0: setting latency timer to 64
[    0.402290] pci 0000:00:0b.0: setting latency timer to 64
[    0.402295] pci 0000:00:0c.0: setting latency timer to 64
[    0.402298] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.402300] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.402302] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.402303] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.402305] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.402307] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.402309] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.402310] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.402312] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.402314] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.402316] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.402318] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.402320] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.402322] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.402324] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.402326] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe0fffff]
[    0.402360] NET: Registered protocol family 2
[    0.402543] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.403686] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.405890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.406154] TCP: Hash tables configured (established 524288 bind 65536)
[    0.406157] TCP reno registered
[    0.406174] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.406226] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.406335] NET: Registered protocol family 1
[    0.406528] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.406545] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    0.476058] pci 0000:00:02.0: PCI INT A disabled
[    0.476203] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.476220] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.476263] pci 0000:00:02.1: PCI INT B disabled
[    0.476316] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.476376] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.476452] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.476529] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.476606] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.476691] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.476784] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.476885] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.476896] pci 0000:02:00.0: Boot video device
[    0.476901] PCI: CLS 64 bytes, default 64
[    0.479589] PCI-DMA: Disabling AGP.
[    0.479680] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    0.479681] PCI-DMA: using GART IOMMU.
[    0.479684] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.482404] IBS: LVT offset 1 assigned
[    0.482428] perf: AMD IBS detected (0x0000001f)
[    0.482587] audit: initializing netlink socket (disabled)
[    0.482604] type=2000 audit(1338799222.476:1): initialized
[    0.516627] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.551207] VFS: Disk quotas dquot_6.5.2
[    0.551250] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.551740] fuse init (API version 7.17)
[    0.551844] msgmni has been set to 15939
[    0.552477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.552582] io scheduler noop registered
[    0.552585] io scheduler deadline registered
[    0.552639] io scheduler cfq registered (default)
[    0.552825] pcieport 0000:00:09.0: setting latency timer to 64
[    0.552866] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.553084] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.553129] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.553338] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.553378] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.553529] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[    0.553532] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.553534] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    0.553537] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[    0.553550] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    0.553553] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    0.553565] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    0.553568] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    0.553581] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.553602] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.553699] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.553704] ACPI: Power Button [PWRB]
[    0.553737] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.553739] ACPI: Power Button [PWRF]
[    0.554959] thermal LNXTHERM:00: registered as thermal_zone0
[    0.554960] ACPI: Thermal Zone [THRM] (30 C)
[    0.554982] ERST: Table is not found!
[    0.554983] GHES: HEST is not enabled!
[    0.555082] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.575542] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.575638] Freeing initrd memory: 13836k freed
[    0.801363] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.848320] Linux agpgart interface v0.103
[    0.849586] brd: module loaded
[    0.850368] loop: module loaded
[    0.850676] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.850907] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    0.850924] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[    0.850935] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.850941] pata_acpi 0000:00:08.0: PCI INT A disabled
[    0.851130] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    0.851141] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[    0.851155] pata_acpi 0000:00:08.1: setting latency timer to 64
[    0.851161] pata_acpi 0000:00:08.1: PCI INT B disabled
[    0.851627] Fixed MDIO Bus: probed
[    0.851642] tun: Universal TUN/TAP device driver, 1.6
[    0.851643] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.851711] PPP generic driver version 2.4.2
[    0.851820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.851914] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.851953] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.851956] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.852059] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.852082] ehci_hcd 0000:00:02.1: debug port 1
[    0.852091] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.852116] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfde7ec00
[    0.864044] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.864202] hub 1-0:1.0: USB hub found
[    0.864206] hub 1-0:1.0: 10 ports detected
[    0.864320] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.864423] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    0.864444] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.864447] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.864523] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.864553] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfde7f000
[    0.922179] hub 2-0:1.0: USB hub found
[    0.922185] hub 2-0:1.0: 10 ports detected
[    0.922288] uhci_hcd: USB Universal Host Controller Interface driver
[    0.922337] usbcore: registered new interface driver libusual
[    0.922368] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.922813] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.922819] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.922955] mousedev: PS/2 mouse device common for all mice
[    0.923078] rtc_cmos 00:02: RTC can wake from S4
[    0.923237] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.923284] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.923344] device-mapper: uevent: version 1.0.3
[    0.923426] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.923433] cpuidle: using governor ladder
[    0.923434] cpuidle: using governor menu
[    0.923435] EFI Variables Facility v0.08 2004-May-17
[    0.923590] TCP cubic registered
[    0.923656] NET: Registered protocol family 10
[    0.923988] NET: Registered protocol family 17
[    0.924027] Registering the dns_resolver key type
[    0.924170] PM: Hibernation image not present or could not be loaded.
[    0.924183] registered taskstats version 1
[    0.946433]   Magic number: 0:279:674
[    0.946552] rtc_cmos 00:02: setting system clock to 2012-06-04 08:40:23 UTC (1338799223)
[    0.946570] powernow-k8: Found 1 AMD Athlon(tm) II X4 640 Processor (4 cpu cores) (version 2.20.00)
[    0.946598] powernow-k8:    0 : pstate 0 (3000 MHz)
[    0.946599] powernow-k8:    1 : pstate 1 (2300 MHz)
[    0.946600] powernow-k8:    2 : pstate 2 (1800 MHz)
[    0.946601] powernow-k8:    3 : pstate 3 (800 MHz)
[    0.946954] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.946956] EDD information not available.
[    0.948301] Freeing unused kernel memory: 920k freed
[    0.948498] Write protecting the kernel read-only data: 12288k
[    0.952737] Freeing unused kernel memory: 1608k freed
[    0.956266] Freeing unused kernel memory: 1196k freed
[    0.975027] udevd[127]: starting version 175
[    0.999132] sata_nv 0000:00:08.0: version 3.5
[    0.999149] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[    0.999191] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.000039] scsi0 : sata_nv
[    1.000923] scsi1 : sata_nv
[    1.001047] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
[    1.001050] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
[    1.002783] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[    1.002832] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.004128] scsi2 : sata_nv
[    1.004626] scsi3 : sata_nv
[    1.004726] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
[    1.004729] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[    1.006054] pata_amd 0000:00:06.0: version 0.4.1
[    1.006094] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.006363] scsi4 : pata_amd
[    1.006575] scsi5 : pata_amd
[    1.007114] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.007117] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.008155] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.008317] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[    1.008322] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[    1.008327] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.010265] Floppy drive(s): fd0 is 1.44M
[    1.028276] FDC 0 is a post-1991 82077
[    1.176056] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    1.309854] hub 1-2:1.0: USB hub found
[    1.310172] hub 1-2:1.0: 4 ports detected
[    1.322616] ata1: SATA link down (SStatus 0 SControl 300)
[    1.326620] ata3: SATA link down (SStatus 0 SControl 300)
[    1.532819] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 10:78:d2:8d:8a:d3
[    1.532823] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.728050] usb 2-6: new full-speed USB device number 2 using ohci_hcd
[    1.788070] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.796986] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[    1.796989] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.813011] ata2.00: configured for UDMA/133
[    1.813216] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[    1.813427] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.813432] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.813564] sd 1:0:0:0: [sda] Write Protect is off
[    1.813569] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.813584] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.856078]  sda: sda1 sda2 < sda5 >
[    1.856841] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.978267] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input2
[    1.978374] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:02.0-6/input0
[    1.988476] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.1/input/input3
[    1.988623] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:02.0-6/input1
[    2.017221] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.2/input/input4
[    2.017397] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:02.0-6/input2
[    2.017412] usbcore: registered new interface driver usbhid
[    2.017413] usbhid: USB HID core driver
[    2.028421] usb 1-2.4: new low-speed USB device number 4 using ehci_hcd
[    2.132724] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.4/1-2.4:1.0/input/input5
[    2.132841] generic-usb 0003:0A81:0101.0004: input,hidraw3: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.1-2.4/input0
[    2.134653] ata4: SATA link down (SStatus 0 SControl 300)
[    2.134744] ata6: port disabled--ignoring
[    2.139203] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.4/1-2.4:1.1/input/input6
[    2.139327] generic-usb 0003:0A81:0101.0005: input,hidraw4: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.1-2.4/input1
[    2.438463] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.602790] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.650148] udevd[353]: starting version 175
[   12.708925] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[   12.708945] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[   12.709118] lp: driver loaded but no devices found
[   12.709903] Adding 982012k swap on /dev/sda5.  Priority:-1 extents:1 across:982012k 
[   12.716534] MCE: In-kernel MCE decoding enabled.
[   12.716778] [drm] Initialized drm 1.1.0 20060810
[   12.717107] EDAC MC: Ver: 2.1.0
[   12.720495] AMD64 EDAC driver v3.4.0
[   12.725216] EDAC amd64: DRAM ECC disabled.
[   12.725225] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   12.725227]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   12.725228]  (Note that use of the override may cause unknown side effects.)
[   12.725513] [drm] radeon defaulting to kernel modesetting.
[   12.725516] [drm] radeon kernel modesetting enabled.
[   12.726174] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[   12.726197] radeon 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[   12.726202] radeon 0000:02:00.0: setting latency timer to 64
[   12.727311] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1787:0x2291).
[   12.727353] [drm] register mmio base: 0xFDFE0000
[   12.727355] [drm] register mmio size: 131072
[   12.728154] ATOM BIOS: CEDAR
[   12.728237] radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[   12.728240] radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[   12.728662] [drm] Detected VRAM RAM=2048M, BAR=256M
[   12.728665] [drm] RAM width 64bits DDR
[   12.729924] parport_pc 00:07: reported by Plug and Play ACPI
[   12.730068] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   12.731585] [TTM] Zone  kernel: Available graphics memory: 4089208 kiB.
[   12.731587] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[   12.731589] [TTM] Initializing pool allocator.
[   12.731611] [drm] radeon: 2048M of VRAM memory ready
[   12.731613] [drm] radeon: 512M of GTT memory ready.
[   12.731627] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.731628] [drm] Driver supports precise vblank timestamp query.
[   12.731676] radeon 0000:02:00.0: irq 43 for MSI/MSI-X
[   12.731682] radeon 0000:02:00.0: radeon: using MSI.
[   12.731717] [drm] radeon: irq initialized.
[   12.731721] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   12.732792] [drm] Loading CEDAR Microcode
[   12.774740] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   12.774747] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[   12.774750] hda_intel: Disabling MSI
[   12.774783] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   12.808967] ppdev: user-space parallel port driver
[   12.816367] lp0: using parport0 (interrupt-driven).
[   12.842085] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   12.842207] radeon 0000:02:00.0: WB enabled
[   12.858370] [drm] ring test succeeded in 1 usecs
[   12.858451] [drm] radeon: ib pool ready.
[   12.858511] [drm] ib test succeeded in 0 usecs
[   12.858753] [drm] Radeon Display Connectors
[   12.858755] [drm] Connector 0:
[   12.858756] [drm]   HDMI-A
[   12.858757] [drm]   HPD1
[   12.858758] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   12.858760] [drm]   Encoders:
[   12.858761] [drm]     DFP1: INTERNAL_UNIPHY1
[   12.858762] [drm] Connector 1:
[   12.858763] [drm]   DVI-I
[   12.858763] [drm]   HPD4
[   12.858765] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   12.858766] [drm]   Encoders:
[   12.858767] [drm]     DFP2: INTERNAL_UNIPHY
[   12.858768] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.858769] [drm] Connector 2:
[   12.858770] [drm]   VGA
[   12.858771] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   12.858772] [drm]   Encoders:
[   12.858774] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   12.858803] [drm] Internal thermal controller with fan control
[   12.858837] [drm] radeon: power management initialized
[   12.940072] [drm] fb mappable at 0xD0142000
[   12.940074] [drm] vram apper at 0xD0000000
[   12.940075] [drm] size 5787648
[   12.940076] [drm] fb depth is 24
[   12.940077] [drm]    pitch is 6400
[   12.940150] fbcon: radeondrmfb (fb0) is primary device
[   12.940256] Console: switching to colour frame buffer device 200x56
[   12.940278] fb0: radeondrmfb frame buffer device
[   12.940279] drm: registered panic notifier
[   12.940285] [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 0
[   12.990017] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.190827] init: failsafe main process (650) killed by TERM signal
[   13.369160] Bluetooth: Core ver 2.16
[   13.369590] NET: Registered protocol family 31
[   13.369593] Bluetooth: HCI device and connection manager initialized
[   13.369596] Bluetooth: HCI socket layer initialized
[   13.369598] Bluetooth: L2CAP socket layer initialized
[   13.369602] Bluetooth: SCO socket layer initialized
[   13.371446] Bluetooth: RFCOMM TTY layer initialized
[   13.371451] Bluetooth: RFCOMM socket layer initialized
[   13.371452] Bluetooth: RFCOMM ver 1.11
[   13.375434] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.375437] Bluetooth: BNEP filters: protocol multicast
[   13.562337] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
[   13.892191] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   13.892342] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   13.892435] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   13.892510] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   13.892564] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[   13.893050] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[   13.893067] snd_hda_intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[   13.893161] snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
[   13.893185] snd_hda_intel 0000:02:00.1: setting latency timer to 64

parametreyide hemen deniyorum

Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 04 Haziran 2012 - 13:18:14

Alıntı yapılan: UmutK - 04 Haziran 2012 - 13:07:18
Alıntı yapılan: if - 04 Haziran 2012 - 12:55:08
dmesg tam çıkmamış.
Kod Seç Genişlet
dmesg > dmesg.log olarak veriniz komutu ve dmesg.log içeriğini pastebin.com'a yapıtırın, kaydedin ve bağlantıyı buraya geçin.

Kod Seç Genişlet
snd-hda-intel.enable_msi=1 parametresi ile başlatınca ses var mı? Bu parametre ile başlatmak için: http://forum.ubuntu-tr.net/index.php?topic=31554.0

Kod Seç Genişlet
sudo pluma /var/log/dmesg

komutuyla tamamını aldım sanırım

Kod Seç Genişlet
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=5fc308fe-6eed-453a-acd1-608c4f321f3c ro quiet splash pci=use_crs vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: ECS MCP61M-M3/MCP61M-M3, BIOS 080015 11/03/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcffc0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cffc0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cffc0000 page 4k [ 0.000000] kernel direct mapping tables up to cffc0000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ cffbe000-cffc0000 [ 0.000000] RAMDISK: 364ea000 - 3726d000 [ 0.000000] ACPI: RSDP 00000000000faee0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cffc0000 00044 (v01 110310 RSDT1147 20101103 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cffc0200 00084 (v01 110310 FACP1147 20101103 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cffc04b0 0498A (v01 1AAAA 1AAAA000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cffce000 00040 [ 0.000000] ACPI: APIC 00000000cffc0390 00090 (v01 110310 APIC1147 20101103 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cffc0420 0003C (v01 110310 OEMMCFG 20101103 MSFT 00000097) [ 0.000000] ACPI: WDRT 00000000cffc0460 00047 (v01 110310 NV-WDRT 20101103 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffce040 00072 (v01 110310 OEMB1147 20101103 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cffc4e40 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cffc4f30 00038 (v01 110310 OEMHPET0 20101103 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cffc4f70 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-230000000 [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000) [ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,230000000) -> [0,230000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cffc0 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096975 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831488 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1225728 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cffce000 [ 0.000000] PM: Registered nosave memory: 00000000cffce000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u262144 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061130 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=5fc308fe-6eed-453a-acd1-608c4f321f3c ro quiet splash pci=use_crs vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 8094904k/9175040k available (6566k kernel code, 787140k absent, 292996k reserved, 6637k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3013.409 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.81 BogoMIPS (lpj=12053636) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004026] Security Framework initialized [ 0.004038] AppArmor: AppArmor initialized [ 0.004039] Yama: becoming mindful. [ 0.008216] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010515] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011530] Mount-cache hash table entries: 256 [ 0.011634] Initializing cgroup subsys cpuacct [ 0.011639] Initializing cgroup subsys memory [ 0.011646] Initializing cgroup subsys devices [ 0.011648] Initializing cgroup subsys freezer [ 0.011649] Initializing cgroup subsys blkio [ 0.011654] Initializing cgroup subsys perf_event [ 0.011677] tseg: 0000000000 [ 0.011688] CPU: Physical Processor ID: 0 [ 0.011689] CPU: Processor Core ID: 0 [ 0.011691] mce: CPU supports 6 MCE banks [ 0.012905] ACPI: Core revision 20110623 [ 0.014990] ftrace: allocating 27049 entries in 107 pages [ 0.016761] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057216] CPU0: AMD Athlon(tm) II X4 640 Processor stepping 03 [ 0.060003] Performance Events: AMD PMU driver. [ 0.060003] ... version: 0 [ 0.060003] ... bit width: 48 [ 0.060003] ... generic registers: 4 [ 0.060003] ... value mask: 0000ffffffffffff [ 0.060003] ... max period: 00007fffffffffff [ 0.060003] ... fixed-purpose events: 0 [ 0.060003] ... event mask: 000000000000000f [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 9a000 [ 0.148008] TSC synchronization [CPU#0 -> CPU#1]: [ 0.148008] Measured 37568423373 cycles TSC warp between CPUs, turning off TSC clock. [ 0.148008] Marking TSC unstable due to check_tsc_sync_source failed [ 0.148023] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148088] #2 [ 0.148089] smpboot cpu 2: start_ip = 9a000 [ 0.236086] NMI watchdog enabled, takes one hw-pmu counter. [ 0.236142] #3 [ 0.236143] smpboot cpu 3: start_ip = 9a000 [ 0.324141] NMI watchdog enabled, takes one hw-pmu counter. [ 0.324156] Brought up 4 CPUs [ 0.324158] Total of 4 processors activated (24108.96 BogoMIPS). [ 0.324867] devtmpfs: initialized [ 0.325213] EVM: security.selinux [ 0.325215] EVM: security.SMACK64 [ 0.325216] EVM: security.capability [ 0.325339] PM: Registering ACPI NVS region at cffce000 (139264 bytes) [ 0.325339] print_constraints: dummy: [ 0.325339] RTC time: 8:40:23, date: 06/04/12 [ 0.325339] NET: Registered protocol family 16 [ 0.325339] node 0 link 0: io port [1000, ffffff] [ 0.325339] TOM: 00000000d0000000 aka 3328M [ 0.325339] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.325339] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.325339] node 0 link 0: mmio [a0000, bffff] [ 0.325339] node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [f0000000, fe0bffff] [ 0.325339] TOM2: 0000000230000000 aka 8960M [ 0.325339] bus: [00, 07] on node 0 link 0 [ 0.325339] bus: 00 index 0 [io 0x0000-0xffff] [ 0.325339] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.325339] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.325339] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.325339] bus: 00 index 4 [mem 0x230000000-0xfcffffffff] [ 0.325339] Extended Config Space enabled on 1 nodes [ 0.325339] ACPI: bus type pci registered [ 0.325339] Trying to unpack rootfs image as initramfs... [ 0.325339] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.325339] PCI: not using MMCONFIG [ 0.325339] PCI: Using configuration type 1 for base access [ 0.325339] PCI: Using configuration type 1 for extended access [ 0.328274] bio: create slab <bio-0> at 0 [ 0.328274] ACPI: Added _OSI(Module Device) [ 0.328274] ACPI: Added _OSI(Processor Device) [ 0.328274] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.328274] ACPI: Added _OSI(Processor Aggregator Device) [ 0.328749] ACPI: EC: Look up EC in DSDT [ 0.329478] ACPI: Executed 1 blocks of module-level executable AML code [ 0.330920] ACPI: Interpreter enabled [ 0.330923] ACPI: (supports S0 S3 S4 S5) [ 0.330935] ACPI: Using IOAPIC for interrupt routing [ 0.330951] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.332221] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.353136] ACPI: No dock devices found. [ 0.353139] HEST: Table not found. [ 0.353142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.353271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.353384] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.353386] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.353388] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.353389] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.353391] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] [ 0.353393] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.353418] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500 [ 0.353617] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601 [ 0.353626] pci 0000:00:01.0: reg 10: [io 0x4f00-0x4fff] [ 0.353677] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05 [ 0.353692] pci 0000:00:01.1: reg 10: [io 0x4900-0x493f] [ 0.353715] pci 0000:00:01.1: reg 20: [io 0x4d00-0x4d3f] [ 0.353722] pci 0000:00:01.1: reg 24: [io 0x4e00-0x4e3f] [ 0.353758] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.353764] pci 0000:00:01.1: PME# disabled [ 0.353776] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500 [ 0.353837] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03 [ 0.353850] pci 0000:00:02.0: reg 10: [mem 0xfde7f000-0xfde7ffff] [ 0.353902] pci 0000:00:02.0: supports D1 D2 [ 0.353904] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.353907] pci 0000:00:02.0: PME# disabled [ 0.353921] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03 [ 0.353935] pci 0000:00:02.1: reg 10: [mem 0xfde7ec00-0xfde7ecff] [ 0.353998] pci 0000:00:02.1: supports D1 D2 [ 0.353999] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.354003] pci 0000:00:02.1: PME# disabled [ 0.354026] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604 [ 0.354090] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403 [ 0.354105] pci 0000:00:05.0: reg 10: [mem 0xfde78000-0xfde7bfff] [ 0.354169] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.354173] pci 0000:00:05.0: PME# disabled [ 0.354196] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101 [ 0.354229] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf] [ 0.354275] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680 [ 0.354290] pci 0000:00:07.0: reg 10: [mem 0xfde7d000-0xfde7dfff] [ 0.354297] pci 0000:00:07.0: reg 14: [io 0xd480-0xd487] [ 0.354359] pci 0000:00:07.0: supports D1 D2 [ 0.354360] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.354365] pci 0000:00:07.0: PME# disabled [ 0.354383] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101 [ 0.354397] pci 0000:00:08.0: reg 10: [io 0xd400-0xd407] [ 0.354404] pci 0000:00:08.0: reg 14: [io 0xd080-0xd083] [ 0.354411] pci 0000:00:08.0: reg 18: [io 0xd000-0xd007] [ 0.354418] pci 0000:00:08.0: reg 1c: [io 0xcc00-0xcc03] [ 0.354424] pci 0000:00:08.0: reg 20: [io 0xc880-0xc88f] [ 0.354431] pci 0000:00:08.0: reg 24: [mem 0xfde7c000-0xfde7cfff] [ 0.354482] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101 [ 0.354496] pci 0000:00:08.1: reg 10: [io 0xc800-0xc807] [ 0.354503] pci 0000:00:08.1: reg 14: [io 0xc480-0xc483] [ 0.354510] pci 0000:00:08.1: reg 18: [io 0xc400-0xc407] [ 0.354516] pci 0000:00:08.1: reg 1c: [io 0xc080-0xc083] [ 0.354523] pci 0000:00:08.1: reg 20: [io 0xc000-0xc00f] [ 0.354530] pci 0000:00:08.1: reg 24: [mem 0xfde77000-0xfde77fff] [ 0.354589] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604 [ 0.354639] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.354642] pci 0000:00:09.0: PME# disabled [ 0.354664] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604 [ 0.354714] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.354716] pci 0000:00:0b.0: PME# disabled [ 0.354737] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604 [ 0.354786] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.354789] pci 0000:00:0c.0: PME# disabled [ 0.354815] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.354832] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.354843] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.354854] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.354868] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.354943] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.354950] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.354952] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.354954] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.354956] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.354958] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.354960] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.355006] pci 0000:02:00.0: [1002:68f9] type 0 class 0x000300 [ 0.355022] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.355035] pci 0000:02:00.0: reg 18: [mem 0xfdfe0000-0xfdffffff 64bit] [ 0.355043] pci 0000:02:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.355059] pci 0000:02:00.0: reg 30: [mem 0xfdfc0000-0xfdfdffff pref] [ 0.355096] pci 0000:02:00.0: supports D1 D2 [ 0.355121] pci 0000:02:00.1: [1002:aa68] type 0 class 0x000403 [ 0.355137] pci 0000:02:00.1: reg 10: [mem 0xfdfbc000-0xfdfbffff 64bit] [ 0.355208] pci 0000:02:00.1: supports D1 D2 [ 0.360052] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.360058] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.360062] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.360066] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.360107] pci 0000:00:0b.0: PCI bridge to [bus 03-03] [ 0.360148] pci 0000:00:0c.0: PCI bridge to [bus 04-04] [ 0.360153] pci 0000:00:0c.0: bridge window [mem 0xfe000000-0xfe0fffff] [ 0.360173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.360274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.360305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.360324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.360343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.360429] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.360525] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.363367] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.363431] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.363494] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.363554] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.363615] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *5 [ 0.363675] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.363734] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.363796] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.363857] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.363918] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.363979] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.364066] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5 [ 0.364128] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 0.364195] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.364256] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 [ 0.364321] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10 [ 0.364384] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11 [ 0.364452] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.364545] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.364545] vgaarb: loaded [ 0.364545] vgaarb: bridge control possible 0000:02:00.0 [ 0.364545] i2c-core: driver [aat2870] using legacy suspend method [ 0.364545] i2c-core: driver [aat2870] using legacy resume method [ 0.364545] SCSI subsystem initialized [ 0.364545] libata version 3.00 loaded. [ 0.364545] usbcore: registered new interface driver usbfs [ 0.364545] usbcore: registered new interface driver hub [ 0.364545] usbcore: registered new device driver usb [ 0.364545] PCI: Using ACPI for IRQ routing [ 0.373786] PCI: pci_cache_line_size set to 64 bytes [ 0.373845] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.373847] reserve RAM buffer: 00000000cffc0000 - 00000000cfffffff [ 0.373926] NetLabel: Initializing [ 0.373927] NetLabel: domain hash size = 128 [ 0.373928] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.373936] NetLabel: unlabeled traffic allowed by default [ 0.373979] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.373979] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.373979] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.388184] Switching to clocksource hpet [ 0.393255] AppArmor: AppArmor Filesystem Enabled [ 0.393280] pnp: PnP ACPI init [ 0.393293] ACPI: bus type pnp registered [ 0.393380] pnp 00:00: [bus 00-ff] [ 0.393382] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.393384] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.393386] pnp 00:00: [io 0x0d00-0xffff window] [ 0.393387] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.393389] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.393391] pnp 00:00: [mem 0xd0000000-0xdfffffff window] [ 0.393392] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.393442] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.393461] pnp 00:01: [dma 4] [ 0.393462] pnp 00:01: [io 0x0000-0x000f] [ 0.393465] pnp 00:01: [io 0x0081-0x0083] [ 0.393467] pnp 00:01: [io 0x0087] [ 0.393468] pnp 00:01: [io 0x0089-0x008b] [ 0.393469] pnp 00:01: [io 0x008f] [ 0.393470] pnp 00:01: [io 0x00c0-0x00df] [ 0.393486] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.393493] pnp 00:02: [io 0x0070-0x0071] [ 0.393507] pnp 00:02: [irq 8] [ 0.393522] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.393528] pnp 00:03: [io 0x0061] [ 0.393543] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.393549] pnp 00:04: [io 0x00f0-0x00ff] [ 0.393558] pnp 00:04: [irq 13] [ 0.393572] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.393748] pnp 00:05: [io 0x03f8-0x03ff] [ 0.393757] pnp 00:05: [irq 4] [ 0.393758] pnp 00:05: [dma 0 disabled] [ 0.393799] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.394058] pnp 00:06: [io 0x03f0-0x03f5] [ 0.394059] pnp 00:06: [io 0x03f7] [ 0.394068] pnp 00:06: [irq 6] [ 0.394069] pnp 00:06: [dma 2] [ 0.394107] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.394345] pnp 00:07: [io 0x0378-0x037f] [ 0.394347] pnp 00:07: [io 0x0778-0x077f] [ 0.394355] pnp 00:07: [irq 7] [ 0.394357] pnp 00:07: [dma 3] [ 0.394444] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.394651] pnp 00:08: [mem 0x000d0000-0x000d3fff window] [ 0.394653] pnp 00:08: [mem 0x000d4000-0x000d7fff window] [ 0.394655] pnp 00:08: [mem 0x000de000-0x000dffff window] [ 0.394656] pnp 00:08: [io 0x0010-0x001f] [ 0.394658] pnp 00:08: [io 0x0022-0x003f] [ 0.394659] pnp 00:08: [io 0x0044-0x004d] [ 0.394660] pnp 00:08: [io 0x0050-0x005f] [ 0.394662] pnp 00:08: [io 0x0062-0x0063] [ 0.394663] pnp 00:08: [io 0x0065-0x006f] [ 0.394664] pnp 00:08: [io 0x0072-0x007f] [ 0.394665] pnp 00:08: [io 0x0080] [ 0.394667] pnp 00:08: [io 0x0084-0x0086] [ 0.394668] pnp 00:08: [io 0x0088] [ 0.394669] pnp 00:08: [io 0x008c-0x008e] [ 0.394670] pnp 00:08: [io 0x0090-0x009f] [ 0.394672] pnp 00:08: [io 0x00a2-0x00bf] [ 0.394673] pnp 00:08: [io 0x00e0-0x00ef] [ 0.394674] pnp 00:08: [io 0x04d0-0x04d1] [ 0.394675] pnp 00:08: [io 0x0800-0x080f] [ 0.394677] pnp 00:08: [io 0x4000-0x407f] [ 0.394680] pnp 00:08: [io 0x4080-0x40ff] [ 0.394681] pnp 00:08: [io 0x4400-0x447f] [ 0.394682] pnp 00:08: [io 0x4480-0x44ff] [ 0.394684] pnp 00:08: [io 0x4800-0x487f] [ 0.394685] pnp 00:08: [io 0x4880-0x48ff] [ 0.394686] pnp 00:08: [io 0x4c00-0x4c7f] [ 0.394687] pnp 00:08: [io 0x4c80-0x4cff] [ 0.394689] pnp 00:08: [mem 0xfec80000-0x1fd93ffff] [ 0.394691] pnp 00:08: [mem 0xfefe0000-0xfefe01ff] [ 0.394692] pnp 00:08: [mem 0xfefe1000-0xfefe1fff] [ 0.394693] pnp 00:08: [mem 0xfee01000-0xfeefffff] [ 0.394695] pnp 00:08: [mem 0xffb80000-0xffffffff] [ 0.394757] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.394759] system 00:08: [io 0x0800-0x080f] has been reserved [ 0.394761] system 00:08: [io 0x4000-0x407f] has been reserved [ 0.394765] system 00:08: [io 0x4080-0x40ff] has been reserved [ 0.394766] system 00:08: [io 0x4400-0x447f] has been reserved [ 0.394768] system 00:08: [io 0x4480-0x44ff] has been reserved [ 0.394770] system 00:08: [io 0x4800-0x487f] has been reserved [ 0.394772] system 00:08: [io 0x4880-0x48ff] has been reserved [ 0.394774] system 00:08: [io 0x4c00-0x4c7f] has been reserved [ 0.394776] system 00:08: [io 0x4c80-0x4cff] has been reserved [ 0.394778] system 00:08: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.394780] system 00:08: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.394784] system 00:08: [mem 0x000de000-0x000dffff window] has been reserved [ 0.394787] system 00:08: [mem 0xfec80000-0x1fd93ffff] could not be reserved [ 0.394789] system 00:08: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.394791] system 00:08: [mem 0xfefe1000-0xfefe1fff] has been reserved [ 0.394793] system 00:08: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.394795] system 00:08: [mem 0xffb80000-0xffffffff] could not be reserved [ 0.394797] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.394834] pnp 00:09: [mem 0xfeff0000-0xfeff0fff] [ 0.394853] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.394901] pnp 00:0a: [io 0x0060] [ 0.394902] pnp 00:0a: [io 0x0064] [ 0.394903] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.394905] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.394932] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.394934] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.394937] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.395006] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.395007] pnp 00:0b: [io 0x0a00-0x0adf] [ 0.395008] pnp 00:0b: [io 0x0ae0-0x0aef] [ 0.395034] system 00:0b: [io 0x0a00-0x0adf] has been reserved [ 0.395036] system 00:0b: [io 0x0ae0-0x0aef] has been reserved [ 0.395038] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.395065] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.395092] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.395094] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.395182] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.395184] pnp 00:0d: [mem 0x000c0000-0x000cffff] [ 0.395185] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.395187] pnp 00:0d: [mem 0x00100000-0xcfffffff] [ 0.395188] pnp 00:0d: [mem 0xfec00000-0xffffffff] [ 0.395222] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.395224] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.395226] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.395228] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.395230] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.395232] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.395406] pnp: PnP ACPI: found 14 devices [ 0.395408] ACPI: ACPI bus type pnp unregistered [ 0.402214] PCI: max bus depth: 1 pci_try_num: 2 [ 0.402237] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.402246] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.402249] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.402252] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.402255] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.402259] pci 0000:00:0b.0: PCI bridge to [bus 03-03] [ 0.402266] pci 0000:00:0c.0: PCI bridge to [bus 04-04] [ 0.402269] pci 0000:00:0c.0: bridge window [mem 0xfe000000-0xfe0fffff] [ 0.402280] pci 0000:00:04.0: setting latency timer to 64 [ 0.402285] pci 0000:00:09.0: setting latency timer to 64 [ 0.402290] pci 0000:00:0b.0: setting latency timer to 64 [ 0.402295] pci 0000:00:0c.0: setting latency timer to 64 [ 0.402298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.402300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.402302] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.402303] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.402305] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.402307] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.402309] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.402310] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.402312] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.402314] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.402316] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.402318] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.402320] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.402322] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.402324] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.402326] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe0fffff] [ 0.402360] NET: Registered protocol family 2 [ 0.402543] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.403686] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.405890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.406154] TCP: Hash tables configured (established 524288 bind 65536) [ 0.406157] TCP reno registered [ 0.406174] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.406226] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.406335] NET: Registered protocol family 1 [ 0.406528] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.406545] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 0.476058] pci 0000:00:02.0: PCI INT A disabled [ 0.476203] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.476220] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.476263] pci 0000:00:02.1: PCI INT B disabled [ 0.476316] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476376] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476452] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476529] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476606] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476691] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476784] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476885] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.476896] pci 0000:02:00.0: Boot video device [ 0.476901] PCI: CLS 64 bytes, default 64 [ 0.479589] PCI-DMA: Disabling AGP. [ 0.479680] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.479681] PCI-DMA: using GART IOMMU. [ 0.479684] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.482404] IBS: LVT offset 1 assigned [ 0.482428] perf: AMD IBS detected (0x0000001f) [ 0.482587] audit: initializing netlink socket (disabled) [ 0.482604] type=2000 audit(1338799222.476:1): initialized [ 0.516627] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.551207] VFS: Disk quotas dquot_6.5.2 [ 0.551250] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.551740] fuse init (API version 7.17) [ 0.551844] msgmni has been set to 15939 [ 0.552477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.552582] io scheduler noop registered [ 0.552585] io scheduler deadline registered [ 0.552639] io scheduler cfq registered (default) [ 0.552825] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.552866] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.553084] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.553129] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X [ 0.553338] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.553378] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X [ 0.553529] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 0.553532] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.553534] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt [ 0.553537] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 0.553550] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt [ 0.553553] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded [ 0.553565] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt [ 0.553568] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded [ 0.553581] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.553602] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.553699] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.553704] ACPI: Power Button [PWRB] [ 0.553737] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.553739] ACPI: Power Button [PWRF] [ 0.554959] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.554960] ACPI: Thermal Zone [THRM] (30 C) [ 0.554982] ERST: Table is not found! [ 0.554983] GHES: HEST is not enabled! [ 0.555082] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.575542] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.575638] Freeing initrd memory: 13836k freed [ 0.801363] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.848320] Linux agpgart interface v0.103 [ 0.849586] brd: module loaded [ 0.850368] loop: module loaded [ 0.850676] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.850907] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 0.850924] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 0.850935] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.850941] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.851130] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 [ 0.851141] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20 [ 0.851155] pata_acpi 0000:00:08.1: setting latency timer to 64 [ 0.851161] pata_acpi 0000:00:08.1: PCI INT B disabled [ 0.851627] Fixed MDIO Bus: probed [ 0.851642] tun: Universal TUN/TAP device driver, 1.6 [ 0.851643] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.851711] PPP generic driver version 2.4.2 [ 0.851820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.851914] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.851953] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.851956] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.852059] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.852082] ehci_hcd 0000:00:02.1: debug port 1 [ 0.852091] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.852116] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfde7ec00 [ 0.864044] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.864202] hub 1-0:1.0: USB hub found [ 0.864206] hub 1-0:1.0: 10 ports detected [ 0.864320] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.864423] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 0.864444] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.864447] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.864523] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.864553] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfde7f000 [ 0.922179] hub 2-0:1.0: USB hub found [ 0.922185] hub 2-0:1.0: 10 ports detected [ 0.922288] uhci_hcd: USB Universal Host Controller Interface driver [ 0.922337] usbcore: registered new interface driver libusual [ 0.922368] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.922813] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.922819] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.922955] mousedev: PS/2 mouse device common for all mice [ 0.923078] rtc_cmos 00:02: RTC can wake from S4 [ 0.923237] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.923284] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.923344] device-mapper: uevent: version 1.0.3 [ 0.923426] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.923433] cpuidle: using governor ladder [ 0.923434] cpuidle: using governor menu [ 0.923435] EFI Variables Facility v0.08 2004-May-17 [ 0.923590] TCP cubic registered [ 0.923656] NET: Registered protocol family 10 [ 0.923988] NET: Registered protocol family 17 [ 0.924027] Registering the dns_resolver key type [ 0.924170] PM: Hibernation image not present or could not be loaded. [ 0.924183] registered taskstats version 1 [ 0.946433] Magic number: 0:279:674 [ 0.946552] rtc_cmos 00:02: setting system clock to 2012-06-04 08:40:23 UTC (1338799223) [ 0.946570] powernow-k8: Found 1 AMD Athlon(tm) II X4 640 Processor (4 cpu cores) (version 2.20.00) [ 0.946598] powernow-k8: 0 : pstate 0 (3000 MHz) [ 0.946599] powernow-k8: 1 : pstate 1 (2300 MHz) [ 0.946600] powernow-k8: 2 : pstate 2 (1800 MHz) [ 0.946601] powernow-k8: 3 : pstate 3 (800 MHz) [ 0.946954] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.946956] EDD information not available. [ 0.948301] Freeing unused kernel memory: 920k freed [ 0.948498] Write protecting the kernel read-only data: 12288k [ 0.952737] Freeing unused kernel memory: 1608k freed [ 0.956266] Freeing unused kernel memory: 1196k freed [ 0.975027] udevd[127]: starting version 175 [ 0.999132] sata_nv 0000:00:08.0: version 3.5 [ 0.999149] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 0.999191] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.000039] scsi0 : sata_nv [ 1.000923] scsi1 : sata_nv [ 1.001047] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21 [ 1.001050] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21 [ 1.002783] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20 [ 1.002832] sata_nv 0000:00:08.1: setting latency timer to 64 [ 1.004128] scsi2 : sata_nv [ 1.004626] scsi3 : sata_nv [ 1.004726] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20 [ 1.004729] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20 [ 1.006054] pata_amd 0000:00:06.0: version 0.4.1 [ 1.006094] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.006363] scsi4 : pata_amd [ 1.006575] scsi5 : pata_amd [ 1.007114] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.007117] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.008155] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.008317] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 1.008322] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 1.008327] forcedeth 0000:00:07.0: setting latency timer to 64 [ 1.010265] Floppy drive(s): fd0 is 1.44M [ 1.028276] FDC 0 is a post-1991 82077 [ 1.176056] usb 1-2: new high-speed USB device number 2 using ehci_hcd [ 1.309854] hub 1-2:1.0: USB hub found [ 1.310172] hub 1-2:1.0: 4 ports detected [ 1.322616] ata1: SATA link down (SStatus 0 SControl 300) [ 1.326620] ata3: SATA link down (SStatus 0 SControl 300) [ 1.532819] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 10:78:d2:8d:8a:d3 [ 1.532823] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.728050] usb 2-6: new full-speed USB device number 2 using ohci_hcd [ 1.788070] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.796986] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 [ 1.796989] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.813011] ata2.00: configured for UDMA/133 [ 1.813216] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 [ 1.813427] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.813432] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.813564] sd 1:0:0:0: [sda] Write Protect is off [ 1.813569] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.813584] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.856078] sda: sda1 sda2 < sda5 > [ 1.856841] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.978267] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input2 [ 1.978374] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:02.0-6/input0 [ 1.988476] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.1/input/input3 [ 1.988623] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:02.0-6/input1 [ 2.017221] input: Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.2/input/input4 [ 2.017397] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae Nano Transceiver v2.0] on usb-0000:00:02.0-6/input2 [ 2.017412] usbcore: registered new interface driver usbhid [ 2.017413] usbhid: USB HID core driver [ 2.028421] usb 1-2.4: new low-speed USB device number 4 using ehci_hcd [ 2.132724] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.4/1-2.4:1.0/input/input5 [ 2.132841] generic-usb 0003:0A81:0101.0004: input,hidraw3: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.1-2.4/input0 [ 2.134653] ata4: SATA link down (SStatus 0 SControl 300) [ 2.134744] ata6: port disabled--ignoring [ 2.139203] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.4/1-2.4:1.1/input/input6 [ 2.139327] generic-usb 0003:0A81:0101.0005: input,hidraw4: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.1-2.4/input1 [ 2.438463] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.602790] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.650148] udevd[353]: starting version 175 [ 12.708925] i2c i2c-0: nForce2 SMBus adapter at 0x4d00 [ 12.708945] i2c i2c-1: nForce2 SMBus adapter at 0x4e00 [ 12.709118] lp: driver loaded but no devices found [ 12.709903] Adding 982012k swap on /dev/sda5. Priority:-1 extents:1 across:982012k [ 12.716534] MCE: In-kernel MCE decoding enabled. [ 12.716778] [drm] Initialized drm 1.1.0 20060810 [ 12.717107] EDAC MC: Ver: 2.1.0 [ 12.720495] AMD64 EDAC driver v3.4.0 [ 12.725216] EDAC amd64: DRAM ECC disabled. [ 12.725225] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 12.725227] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 12.725228] (Note that use of the override may cause unknown side effects.) [ 12.725513] [drm] radeon defaulting to kernel modesetting. [ 12.725516] [drm] radeon kernel modesetting enabled. [ 12.726174] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 [ 12.726197] radeon 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 12.726202] radeon 0000:02:00.0: setting latency timer to 64 [ 12.727311] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1787:0x2291). [ 12.727353] [drm] register mmio base: 0xFDFE0000 [ 12.727355] [drm] register mmio size: 131072 [ 12.728154] ATOM BIOS: CEDAR [ 12.728237] radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 12.728240] radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [ 12.728662] [drm] Detected VRAM RAM=2048M, BAR=256M [ 12.728665] [drm] RAM width 64bits DDR [ 12.729924] parport_pc 00:07: reported by Plug and Play ACPI [ 12.730068] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 12.731585] [TTM] Zone kernel: Available graphics memory: 4089208 kiB. [ 12.731587] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 12.731589] [TTM] Initializing pool allocator. [ 12.731611] [drm] radeon: 2048M of VRAM memory ready [ 12.731613] [drm] radeon: 512M of GTT memory ready. [ 12.731627] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 12.731628] [drm] Driver supports precise vblank timestamp query. [ 12.731676] radeon 0000:02:00.0: irq 43 for MSI/MSI-X [ 12.731682] radeon 0000:02:00.0: radeon: using MSI. [ 12.731717] [drm] radeon: irq initialized. [ 12.731721] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 12.732792] [drm] Loading CEDAR Microcode [ 12.774740] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 12.774747] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 12.774750] hda_intel: Disabling MSI [ 12.774783] snd_hda_intel 0000:00:05.0: setting latency timer to 64 [ 12.808967] ppdev: user-space parallel port driver [ 12.816367] lp0: using parport0 (interrupt-driven). [ 12.842085] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 12.842207] radeon 0000:02:00.0: WB enabled [ 12.858370] [drm] ring test succeeded in 1 usecs [ 12.858451] [drm] radeon: ib pool ready. [ 12.858511] [drm] ib test succeeded in 0 usecs [ 12.858753] [drm] Radeon Display Connectors [ 12.858755] [drm] Connector 0: [ 12.858756] [drm] HDMI-A [ 12.858757] [drm] HPD1 [ 12.858758] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 12.858760] [drm] Encoders: [ 12.858761] [drm] DFP1: INTERNAL_UNIPHY1 [ 12.858762] [drm] Connector 1: [ 12.858763] [drm] DVI-I [ 12.858763] [drm] HPD4 [ 12.858765] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 12.858766] [drm] Encoders: [ 12.858767] [drm] DFP2: INTERNAL_UNIPHY [ 12.858768] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 12.858769] [drm] Connector 2: [ 12.858770] [drm] VGA [ 12.858771] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 12.858772] [drm] Encoders: [ 12.858774] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 12.858803] [drm] Internal thermal controller with fan control [ 12.858837] [drm] radeon: power management initialized [ 12.940072] [drm] fb mappable at 0xD0142000 [ 12.940074] [drm] vram apper at 0xD0000000 [ 12.940075] [drm] size 5787648 [ 12.940076] [drm] fb depth is 24 [ 12.940077] [drm] pitch is 6400 [ 12.940150] fbcon: radeondrmfb (fb0) is primary device [ 12.940256] Console: switching to colour frame buffer device 200x56 [ 12.940278] fb0: radeondrmfb frame buffer device [ 12.940279] drm: registered panic notifier [ 12.940285] [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 0 [ 12.990017] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.190827] init: failsafe main process (650) killed by TERM signal [ 13.369160] Bluetooth: Core ver 2.16 [ 13.369590] NET: Registered protocol family 31 [ 13.369593] Bluetooth: HCI device and connection manager initialized [ 13.369596] Bluetooth: HCI socket layer initialized [ 13.369598] Bluetooth: L2CAP socket layer initialized [ 13.369602] Bluetooth: SCO socket layer initialized [ 13.371446] Bluetooth: RFCOMM TTY layer initialized [ 13.371451] Bluetooth: RFCOMM socket layer initialized [ 13.371452] Bluetooth: RFCOMM ver 1.11 [ 13.375434] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.375437] Bluetooth: BNEP filters: protocol multicast [ 13.562337] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X [ 13.892191] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input7 [ 13.892342] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8 [ 13.892435] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 13.892510] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input10 [ 13.892564] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input11 [ 13.893050] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 [ 13.893067] snd_hda_intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 [ 13.893161] snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X [ 13.893185] snd_hda_intel 0000:02:00.1: setting latency timer to 64

parametreyide hemen deniyorum

Kod Seç

snd-hda-intel.enable_msi=1
ses hala yok

if · 04 Haziran 2012 - 14:11:11

Peki,

Kod Seç

aplay -D hw:0,0 test.wav
aplay -D hw:0,1 test.wav
aplay -D hw:0,2 test.wav
aplay -D hw:1,3 test.wav

komutlarından hangisinden ses alıyorsunuz?

UmutK · 04 Haziran 2012 - 21:40:15

Alıntı yapılan: if - 04 Haziran 2012 - 14:11:11
Peki,
Kod Seç Genişlet
aplay -D hw:0,0 test.wav aplay -D hw:0,1 test.wav aplay -D hw:0,2 test.wav aplay -D hw:1,3 test.wav komutlarından hangisinden ses alıyorsunuz?

Kod Seç


umut@umut ~ $ aplay -D hw:0,0 test.wav
test.wav: Böyle bir dosya ya da dizin yok
umut@umut ~ $ aplay -D hw:0,1 test.wav
test.wav: Böyle bir dosya ya da dizin yok
umut@umut ~ $ aplay -D hw:0,2 test.wav
test.wav: Böyle bir dosya ya da dizin yok
umut@umut ~ $ aplay -D hw:1,3 test.wav
aplay: main:682: ses açılış hatası: Böyle bir dosya ya da dizin yok
umut@umut ~ $

hata aldım

if · 04 Haziran 2012 - 21:52:01

@UmutK, şansımızı OSS yükleyerek deneyelim. Buradaki[1] anlatımla yükleyebilirsiniz OSS'yi. Her bir adımı teker teker yapınız. Zorlandığınız, anlamadığınız ve hata aldığınız adımda bana sorabilirsiniz. O zaman kadar yaptığınız tüm adımların çıktılarını buraya geçiniz.

Artık bu da olmazsa Launchpad'e bir hata kaydı açarız.

[1] https://help.ubuntu.com/community/OpenSound

UmutK · 04 Haziran 2012 - 22:02:17

Alıntı yapılan: if - 04 Haziran 2012 - 21:52:01
@UmutK, şansımızı OSS yükleyerek deneyelim. Buradaki[1] anlatımla yükleyebilirsiniz OSS'yi. Her bir adımı teker teker yapınız. Zorlandığınız, anlamadığınız ve hata aldığınız adımda bana sorabilirsiniz. O zaman kadar yaptığınız tüm adımların çıktılarını buraya geçiniz.

Artık bu da olmazsa Launchpad'e bir hata kaydı açarız.

[1] https://help.ubuntu.com/community/OpenSound

Yardımlarınız için teşekkür ederim buradaki adımları Linux Mint için uygulasam sorun olmaz mı ?

if · 04 Haziran 2012 - 22:09:37

@UmutK, kesin sorun olmaz diyemem ama büyük ihtimal kurabilirsiniz de neden Linux Mint? Hani işler kolaylaşır diye geçiyorsanız kolaylaşmaz.

UmutK · 04 Haziran 2012 - 22:16:29

Arkadaşımın büyük etkisi oldu Linux Mint kurmuş aynı board ve ses kartı onda herhangi bir sorun yaşanmadı sanırım o yüzden acaba ubuntu tabanlı olmayan bir linux mu denesem ?

if · 04 Haziran 2012 - 22:18:46

O zaman denemeye değer tabi de Ubuntu tabanlı olduğu için pek umudum yok. Ubuntu tabanlı olmayan bir sürüm de deneyebilirsiniz tabi.

UmutK · 04 Haziran 2012 - 22:22:11

Acaba Ubuntu tabanlı olmayan önerdiğiniz işletim sistemleri nelerdir ?
Türkçe olması ilk tercihim

if · 04 Haziran 2012 - 23:21:22

@UmutK, Mageia'yı kurabilirsiniz.

Yeni dağıtım kurana kadar biz OSS'yi kurabiliriz.

UmutK · 04 Haziran 2012 - 23:47:03

biraz geç kaldık şuan mandrivayı kurdum ses var fakat biraz kısık
...
şuan mandriva da ses açılıp kapanıyor kendiliğinden ses yükseldikçe kendiliğinden kısıyor belli bir seviyeye kadar
...
ubuntuyu tekrardan indiriyorum bu hatanın üzerine gitmeyi planlıyorum umarım yardımcı olmaya devam edersiniz

kurduktan sonra hiç bir güncelleme yapmadan OSS kursak olur mu ?

if · 05 Haziran 2012 - 00:42:33

@UmutK, olur, yardımcı olurum. Direk oss kuruluma geçebiliriz.

heartsmagic · 05 Haziran 2012 - 16:18:24

Ubuntu kurulumundan sonra OSS denemeden önce şunu tekrar deneyebilir miyiz:
http://forum.ubuntu-tr.net/index.php?topic=34027.msg408545#msg408545

UmutK · 09 Haziran 2012 - 00:18:35

Öncellikle özür dileyerek başlamak istiyorum,2-3 gündür işlerim yoğun olduğu için bilgisayarım ve sizle ilgilenemedim
Şuan 0 dan kurulmuş güncellenmiş ubuntu 12.04 ile başladım hata hala devam ediyor.

Alıntı yapılan: heartsmagic - 05 Haziran 2012 - 16:18:24
Ubuntu kurulumundan sonra OSS denemeden önce şunu tekrar deneyebilir miyiz:
http://forum.ubuntu-tr.net/index.php?topic=34027.msg408545#msg408545

Denedim ne yazıkki başarısız.

Alıntı yapılan: if - 05 Haziran 2012 - 00:42:33
@UmutK, olur, yardımcı olurum. Direk oss kuruluma geçebiliriz.

Acaban bana ne yapıcağımı basamklarla anlatsanız ?

if · 09 Haziran 2012 - 00:32:25

@UmutK,

Kod Seç

dmesg | grep Command çıktısını alayım.

OSS kurmak için:

1-

Kod Seç

sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio
2-

Kod Seç

sudo /etc/init.d/alsa-store stop
sudo /etc/init.d/alsa-restore stop
sudo apt-get remove alsa-base alsa-utils

3-

Kod Seç

sudo dpkg-reconfigure linux-sound-base komutundan sonra bir ekran gelecek, enter tuşuna basın. Sonra ses aygıtı için öntanımlı çıkışı seçmeniz istenecek, OSS'yi seçin.

Kod Seç

gksu gedit /etc/modprobe.d/sound.conf içerisine

Kod Seç

blacklist snd
blacklist soundcore

yazıp kaydedin. Ve bu adımlardan sonra bilgisayarı yeniden başlatın.
4-

Kod Seç

sudo apt-get install -y binutils libgtk2.0-0 sed gcc libc6
sudo apt-get install -y libesd0 libsdl1.2debian

5- http://www.opensound.com/download.cgi bağlantısından 32 bit için "Linux 2.6(x86) DEB" 64 bit için "Linux 2.6 (amd64) DEB" olanını seçiniz ve indiriniz. Bilgisayarı yeniden başlatınız ve indirdiğiniz paketi kurmak için

Kod Seç

sudo dpkg -i oss-linux*.deb komutunu veriniz.
6-

Kod Seç

sudo apt-get install libasound2-plugins yüklemesinden sonra

Kod Seç

nano ~/.asoundrc komutunu verin ve içerisine

Kod Seç

 pcm.!default
 {
   type oss
   device /dev/dsp
 }
 mixer.!default
 {
   type oss
   device /dev/dsp
 }

satırlarını kopyala yapıştır yapın. ctrl+o ile kaydedin, ctrl+x ile çıkın.
7-

Kod Seç

sudo apt-get install -y gstreamer0.10-plugins-bad yüklemesinden sonra

Kod Seç

gstreamer-properties komtunu verin. Yeni bir pencere açılacaktır. Ses>Eklenti>OSS Açık Ses Sistemini seçin. Dene tuşuna bastığınızda ses duyabiliyor olmanız gerek.

UmutK · 09 Haziran 2012 - 00:38:46

Kod Seç

umut@umut:~$ dmesg | grep Command
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=faf2a82e-4eec-4aba-b4f3-d9811aa5ade2 ro quiet splash pci=use_crs vt.handoff=7
umut@umut:~$

buyrun

Kod Seç

sudo apt-get install -y libesd0 libsdl1.2debian-oss

adımında hata aldım sanırım

Kod Seç

umut@umut:~$ sudo apt-get install -y libesd0 libsdl1.2debian-oss
Paket listeleri okunuyor... Bitti
Bağımlılık ağacı inşa ediliyor.       
Durum bilgisi okunuyor... Bitti       
libsdl1.2debian-oss paketi mevcut değil, ancak başka paket içerisinden işaret edilmiş.
Bunun anlamı paket kayıp, eskimiş olabilir ya da 
başka bir yazılım kaynağında mevcut olabilir.
Yine de aşağıdaki paketler üzerine yazar:
  libsdl1.2debian:i386 libsdl1.2debian

E: 'libsdl1.2debian-oss' paketi için kurulum adayı yok
umut@umut:~$

if · 09 Haziran 2012 - 00:59:49

@UmutK,

Kod Seç

sudo apt-cache search libsdl1.2debian-oss ne diyor?

UmutK · 09 Haziran 2012 - 01:06:08

Kod Seç

umut@umut:~$ sudo apt-cache search libsdl1.2debian-oss
umut@umut:~$

hiç birşey çıkmadı

if · 09 Haziran 2012 - 01:30:45

@UmutK, bu paket işleri karıştırdı biraz. İlk elden önce ben kurayım, sonra size anlatırım.

https://launchpad.net/ubuntu/precise/+package/libsdl1.2debian-oss

UmutK · 09 Haziran 2012 - 01:32:42

Alıntı yapılan: if - 09 Haziran 2012 - 01:30:45
@UmutK, bu paket işleri karıştırdı biraz. İlk elden önce ben kurayım, sonra size anlatırım.

https://launchpad.net/ubuntu/precise/+package/libsdl1.2debian-oss

Tamam o zaman.

UmutK · 11 Haziran 2012 - 00:17:08

acaba ne zaman yardımcı olacaksınız

if · 11 Haziran 2012 - 00:21:05

En kısa zamanda:)

Güncelleme: Anlatımı güncelledim.

UmutK · 11 Haziran 2012 - 01:59:39

Öncellikle ne diyeceğimi bilemedim,size çook çoook teşekkür ederim.
Ses şuan son ses gelmekte herhangi bir sorun gözükmüyor
Uzun zamandır bu anı bekliyordum her şey için minettarım

Aklımda bir iki soru var öncellikle Bilgisayarı Kapattığım menünün yanındaki ses ayarı yok sesi ayarlayamıyorum.
İkinci sorun olarak OSS kurarken trial yazdı (deneme sürümümü bu ? )

if · 11 Haziran 2012 - 02:14:04

Rica ederim @UmutK. Ben de sevindim sorununuzu çözdüğümüze.

O ses ayarını sistemden kaldırdık OSS'nin çalışabilmesi için. Onun yenine kullanılacak bir kaç şey var. Bakalım becerebilecek miyiz.
Ben ona dikkat etmemiştim @UmutK. Deneme sürümü değil de geliştirme sürümüdür. Yani 30 gün kullandıktan sonra çalıştırılması için sizden para istemez:)

Ubuntu Türkiye

Haberler:

[Çözüldü] VIA VT1705 ses yok

if

UmutK

if

UmutK

if

UmutK

if

UmutK

if

UmutK

if

UmutK

if

heartsmagic

UmutK

if

UmutK

if

UmutK

if

UmutK

UmutK

if

UmutK

if