ubuntu 12.04 kablosuz ağ bağlantısı

[arkeomuhsin]

son bir haftadır kablosuz ağlarda problem var; bağlantı çok yavaş, bağlanmıyor, bağlandıktan sonra tekrar kopuyor

tüm güncelleştirmeleri yaptım ayrıca evdeki diğer işletim sistemli bilgisayarlarda hiç bir bağlantı problemi yokken ubuntu sürekli sorun yaşıyor.

[zeitgeist]

http://forum.ubuntu-tr.net/index.php?topic=28764.0

[arkeomuhsin]

Kod Seç Genişlet

arkeomuhsin@arkeomuhsin-HP-550:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS"

Kod Seç Genişlet

arkeomuhsin@arkeomuhsin-HP-550:~$ uname -a
Linux arkeomuhsin-HP-550 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux

Kod Seç Genişlet

arkeomuhsin@arkeomuhsin-HP-550:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile GME965/GLE960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82562GT 10/100 Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)

Kod Seç Genişlet

arkeomuhsin@arkeomuhsin-HP-550:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]

Kod Seç Genişlet

arkeomuhsin@arkeomuhsin-HP-550:~$ rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no

Kod Seç Genişlet

arkeomuhsin@arkeomuhsin-HP-550:~$ sudo lshw -C network

[if]

@arkeomuhsin, diğer çıktıları da alayım.

[arkeomuhsin]

diğer çıktılar nasıl alınıyor bilmiyorum çünkü ubuntu hakkında hiçbir şey bilmeyen bir ubuntu kullanıcısıyım

[if]

@arkeomuhsin, yukarıdaki komutların çıktılarını nasıl aktardıysanız

Kod Seç Genişlet

sudo lshw -C network
ifconfig
iwconfig
iwlist scanning
lsmod
dmesg
dmesg | tail komutlarının çıktılarını da aktarınız. dmesg çıktısı uzun olur. Bu yüzden

Kod Seç Genişlet

dmesg > dmesg.log olarak veriniz komutu. dmesg.log dosyasının içeriğini buraya geçersiniz.

[arkeomuhsin]

Kod Seç Genişlet

[sudo] password for arkeomuhsin:
  *-network               
       açıklama: Eternet interface
       ürün: 82562GT 10/100 Network Connection
       üretici: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       mantıksal ad: eth0
       sürüm: 03
       serial: 00:24:81:43:34:15
       kapasite: 100Mbit/s
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm msi bus_master cap_list eternet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k firmware=1.1-2 latency=0 link=no multicast=yes port=twisted pair
       kaynaklar: irq:44 bellek:e4600000-e461ffff bellek:e4620000-e4620fff ioport:4020(boyut=32)
  *-network
       açıklama: Kablosuz arayüz
       ürün: PRO/Wireless 3945ABG [Golan] Network Connection
       üretici: Intel Corporation
       physical id: 0
       bus info: pci@0000:10:00.0
       mantıksal ad: wlan0
       sürüm: 02
       serial: 00:1f:3c:cf:84:ea
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=iwl3945 driverversion=3.2.0-24-generic-pae firmware=15.32.2.9 ip=192.168.0.12 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg
       kaynaklar: irq:45 bellek:e4000000-e4000fff


[if]

@arkeomuhsin,

Kod Seç Genişlet

ifconfig
iwconfig
iwlist scanning
lsmod
dmesg
dmesg | tail çıktılarını da ekleyecek misiniz?

[arkeomuhsin]

Kod Seç Genişlet

[    0.453318] pnp 00:0a: [mem 0xfed90000-0xfed99fff]
[    0.453416] system 00:0a: [io  0x04d0-0x04d1] has been reserved
[    0.453420] system 00:0a: [io  0x1000-0x107f] has been reserved
[    0.453424] system 00:0a: [io  0x1100-0x113f] has been reserved
[    0.453427] system 00:0a: [io  0x1200-0x121f] has been reserved
[    0.453431] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.453435] system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.453439] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.453446] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.453450] system 00:0a: [mem 0xfed90000-0xfed99fff] has been reserved
[    0.453455] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.454540] pnp 00:0b: [mem 0x000cee00-0x000cffff]
[    0.454543] pnp 00:0b: [mem 0x000d2000-0x000d3fff]
[    0.454546] pnp 00:0b: [mem 0xfeda0000-0xfedbffff]
[    0.454549] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    0.454654] system 00:0b: [mem 0x000cee00-0x000cffff] has been reserved
[    0.454658] system 00:0b: [mem 0x000d2000-0x000d3fff] has been reserved
[    0.454662] system 00:0b: [mem 0xfeda0000-0xfedbffff] has been reserved
[    0.454666] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.454670] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.454691] pnp: PnP ACPI: found 12 devices
[    0.454693] ACPI: ACPI bus type pnp unregistered
[    0.454698] PnPBIOS: Disabled by ACPI PNP
[    0.491734] PCI: max bus depth: 1 pci_try_num: 2
[    0.491802] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.491807] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.491814] pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
[    0.491818] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[    0.491836] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
[    0.491841] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.491849] pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]
[    0.491855] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.491865] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
[    0.491870] pci 0000:00:1c.4:   bridge window [io  0x2000-0x3fff]
[    0.491878] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xe3ffffff]
[    0.491884] pci 0000:00:1c.4:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.491894] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.491939] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.491947] pci 0000:00:1c.0: setting latency timer to 64
[    0.491961] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.491967] pci 0000:00:1c.1: setting latency timer to 64
[    0.491977] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.491983] pci 0000:00:1c.4: setting latency timer to 64
[    0.491994] pci 0000:00:1e.0: setting latency timer to 64
[    0.492019] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.492022] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.492026] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.492029] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xfedfffff]
[    0.492032] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
[    0.492035] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000dffff]
[    0.492039] pci_bus 0000:10: resource 0 [io  0x5000-0x5fff]
[    0.492042] pci_bus 0000:10: resource 1 [mem 0xe4000000-0xe40fffff]
[    0.492045] pci_bus 0000:10: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.492049] pci_bus 0000:28: resource 0 [io  0x2000-0x3fff]
[    0.492052] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
[    0.492055] pci_bus 0000:28: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.492059] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.492062] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.492065] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.492068] pci_bus 0000:02: resource 7 [mem 0x7f800000-0xfedfffff]
[    0.492072] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
[    0.492075] pci_bus 0000:02: resource 9 [mem 0x000d4000-0x000dffff]
[    0.492133] NET: Registered protocol family 2
[    0.492226] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.492546] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.493095] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.493354] TCP: Hash tables configured (established 131072 bind 65536)
[    0.493357] TCP reno registered
[    0.493361] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.493371] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.493472] NET: Registered protocol family 1
[    0.493495] pci 0000:00:02.0: Boot video device
[    0.493518] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.493542] pci 0000:00:1a.0: PCI INT A disabled
[    0.493565] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.493603] pci 0000:00:1a.7: PCI INT C disabled
[    0.493632] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.493654] pci 0000:00:1d.0: PCI INT A disabled
[    0.493668] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.493690] pci 0000:00:1d.1: PCI INT B disabled
[    0.493700] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.493722] pci 0000:00:1d.2: PCI INT C disabled
[    0.493734] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.493754] pci 0000:00:1d.7: PCI INT A disabled
[    0.493820] PCI: CLS 64 bytes, default 64
[    0.494268] audit: initializing netlink socket (disabled)
[    0.494280] type=2000 audit(1338567359.488:1): initialized
[    0.526753] highmem bounce pool size: 64 pages
[    0.526761] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.527940] Freeing initrd memory: 13792k freed
[    0.543929] VFS: Disk quotas dquot_6.5.2
[    0.544044] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.544799] fuse init (API version 7.17)
[    0.544929] msgmni has been set to 1713
[    0.545400] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.545437] io scheduler noop registered
[    0.545440] io scheduler deadline registered
[    0.545450] io scheduler cfq registered (default)
[    0.545599] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.545668] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.545766] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.545829] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.545921] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.545983] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.546111] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.546143] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.546241] intel_idle: MWAIT substates: 0x22220
[    0.546244] intel_idle: does not run on family 6 model 15
[    0.549828] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.549970] ACPI: AC Adapter [C23A] (on-line)
[    0.550268] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    0.550275] ACPI: Sleep Button [C2B4]
[    0.550336] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.550376] ACPI: Lid Switch [C154]
[    0.550440] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.550444] ACPI: Power Button [PWRF]
[    0.550563] ACPI: Fan [C3B7] (off)
[    0.550638] ACPI: Fan [C3B8] (off)
[    0.550708] ACPI: Fan [C3B9] (off)
[    0.550780] ACPI: Fan [C3BA] (off)
[    0.550850] ACPI: Fan [C3BB] (off)
[    0.553304] Monitor-Mwait will be used to enter C-1 state
[    0.553342] Monitor-Mwait will be used to enter C-2 state
[    0.553352] Marking TSC unstable due to TSC halts in idle
[    0.553363] ACPI: acpi_idle registered with cpuidle
[    0.559969] thermal LNXTHERM:00: registered as thermal_zone0
[    0.559972] ACPI: Thermal Zone [TZ3] (39 C)
[    0.569085] thermal LNXTHERM:01: registered as thermal_zone1
[    0.569088] ACPI: Thermal Zone [TZ4] (20 C)
[    0.572816] thermal LNXTHERM:02: registered as thermal_zone2
[    0.572819] ACPI: Thermal Zone [TZ5] (20 C)
[    0.589829] thermal LNXTHERM:03: registered as thermal_zone3
[    0.589833] ACPI: Thermal Zone [TZ0] (51 C)
[    0.593413] thermal LNXTHERM:04: registered as thermal_zone4
[    0.593416] ACPI: Thermal Zone [TZ1] (46 C)
[    0.593453] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.593463] ACPI: Battery Slot [C23B] (battery absent)
[    0.593507] ERST: Table is not found!
[    0.593509] GHES: HEST is not enabled!
[    0.593551] ACPI: Battery Slot [C23B] (battery absent)
[    0.593576] isapnp: Scanning for PnP cards...
[    0.593606] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.947917] isapnp: No Plug & Play device found
[    0.996574] Linux agpgart interface v0.103
[    0.996699] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[    0.996782] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.997331] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.997488] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.999549] brd: module loaded
[    1.000636] loop: module loaded
[    1.000823] ahci 0000:00:1f.2: version 3.0
[    1.000840] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.000902] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.000941] ahci: SSS flag set, parallel bus scan disabled
[    1.000975] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    1.000980] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[    1.000986] ahci 0000:00:1f.2: setting latency timer to 64
[    1.001564] scsi0 : ahci
[    1.001689] scsi1 : ahci
[    1.001798] scsi2 : ahci
[    1.001918] ata1: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629100 irq 43
[    1.001923] ata2: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629180 irq 43
[    1.001927] ata3: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629200 irq 43
[    1.002034] ata_piix 0000:00:1f.1: version 2.13
[    1.002045] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.002083] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.002490] scsi3 : ata_piix
[    1.002592] scsi4 : ata_piix
[    1.002986] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[    1.002990] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[    1.003081] ata5: port disabled--ignoring
[    1.003510] Fixed MDIO Bus: probed
[    1.003539] tun: Universal TUN/TAP device driver, 1.6
[    1.003542] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.003715] PPP generic driver version 2.4.2
[    1.003862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.003884] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.003901] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.003906] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.003966] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.003999] ehci_hcd 0000:00:1a.7: debug port 1
[    1.007892] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.007912] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4621000
[    1.020022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.020200] hub 1-0:1.0: USB hub found
[    1.020206] hub 1-0:1.0: 4 ports detected
[    1.020303] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.020318] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.020322] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.020386] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.020417] ehci_hcd 0000:00:1d.7: debug port 1
[    1.024311] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.024329] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4628000
[    1.040021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.040176] hub 2-0:1.0: USB hub found
[    1.040182] hub 2-0:1.0: 6 ports detected
[    1.040286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.040306] uhci_hcd: USB Universal Host Controller Interface driver
[    1.040329] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.040339] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.040344] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.040407] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.040450] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
[    1.040619] hub 3-0:1.0: USB hub found
[    1.040624] hub 3-0:1.0: 2 ports detected
[    1.040710] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.040720] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.040725] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.040784] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.040814] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
[    1.040985] hub 4-0:1.0: USB hub found
[    1.040990] hub 4-0:1.0: 2 ports detected
[    1.041078] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.041088] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.041093] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.041154] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.041197] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
[    1.041363] hub 5-0:1.0: USB hub found
[    1.041367] hub 5-0:1.0: 2 ports detected
[    1.041459] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.041469] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.041474] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.041533] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    1.041563] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[    1.041732] hub 6-0:1.0: USB hub found
[    1.041737] hub 6-0:1.0: 2 ports detected
[    1.041890] usbcore: registered new interface driver libusual
[    1.041966] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
[    1.043585] i8042: Detected active multiplexing controller, rev 1.1
[    1.044261] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.044268] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.044307] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.044343] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.044377] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.044542] mousedev: PS/2 mouse device common for all mice
[    1.044799] rtc_cmos 00:05: RTC can wake from S4
[    1.044958] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.044992] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.045065] device-mapper: uevent: version 1.0.3
[    1.045165] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.045209] EISA: Probing bus 0 at eisa.0
[    1.045212] EISA: Cannot allocate resource for mainboard
[    1.045215] Cannot allocate resource for EISA slot 1
[    1.045217] Cannot allocate resource for EISA slot 2
[    1.045220] Cannot allocate resource for EISA slot 3
[    1.045222] Cannot allocate resource for EISA slot 4
[    1.045225] Cannot allocate resource for EISA slot 5
[    1.045227] Cannot allocate resource for EISA slot 6
[    1.045230] Cannot allocate resource for EISA slot 7
[    1.045232] Cannot allocate resource for EISA slot 8
[    1.045235] EISA: Detected 0 cards.
[    1.045246] cpufreq-nforce2: No nForce2 chipset.
[    1.045310] cpuidle: using governor ladder
[    1.045414] cpuidle: using governor menu
[    1.045417] EFI Variables Facility v0.08 2004-May-17
[    1.045767] TCP cubic registered
[    1.045927] NET: Registered protocol family 10
[    1.046677] NET: Registered protocol family 17
[    1.046696] Registering the dns_resolver key type
[    1.046717] Using IPI No-Shortcut mode
[    1.046917] PM: Hibernation image not present or could not be loaded.
[    1.046932] registered taskstats version 1
[    1.059064]   Magic number: 0:490:286
[    1.059079] ppp ppp: hash matches
[    1.059189] rtc_cmos 00:05: setting system clock to 2012-06-01 16:16:00 UTC (1338567360)
[    1.059802] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.059804] EDD information not available.
[    1.066162] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.320090] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.322189] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.322194] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.322405] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[    1.322410] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.323338] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40F, max UDMA/100
[    1.323342] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.325637] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.325641] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.325857] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[    1.325862] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.326787] ata1.00: configured for UDMA/100
[    1.327001] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
[    1.327175] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.327214] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.327251] sd 0:0:0:0: [sda] Write Protect is off
[    1.327255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.327292] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.368761]  sda: sda1 sda2 < sda5 >
[    1.369471] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.632070] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    1.644070] ata2: SATA link down (SStatus 0 SControl 300)
[    1.964097] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.969281] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[    1.974110] ata3.00: configured for UDMA/100
[    2.085564] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SC04 PQ: 0 ANSI: 5
[    2.195515] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.195519] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.195702] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.195818] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.196087] Freeing unused kernel memory: 740k freed
[    2.196480] Write protecting the kernel text: 5828k
[    2.196518] Write protecting the kernel read-only data: 2376k
[    2.196520] NX-protecting the kernel data: 4412k
[    2.217912] udevd[98]: starting version 175
[    2.278065] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[    2.278069] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    2.278125] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    2.278141] e1000e 0000:00:19.0: setting latency timer to 64
[    2.278282] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[    2.458399] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:24:81:43:34:15
[    2.458404] e1000e 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
[    2.458435] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 7, PBA No: FFFFFF-0FF
[    2.534077] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.140441] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.186114] udevd[359]: starting version 175
[   13.249471] lp: driver loaded but no devices found
[   13.270989] Adding 2086908k swap on /dev/sda5.  Priority:-1 extents:1 across:2086908k
[   13.350640] wmi: Mapper loaded
[   13.363692] [drm] Initialized drm 1.1.0 20060810
[   13.371066] cfg80211: Calling CRDA to update world regulatory domain
[   13.395856] type=1400 audit(1338560172.829:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
[   13.396480] type=1400 audit(1338560172.833:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
[   13.396787] type=1400 audit(1338560172.833:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
[   13.440823] Bluetooth: Core ver 2.16
[   13.443334] NET: Registered protocol family 31
[   13.443340] Bluetooth: HCI device and connection manager initialized
[   13.443344] Bluetooth: HCI socket layer initialized
[   13.443347] Bluetooth: L2CAP socket layer initialized
[   13.443360] Bluetooth: SCO socket layer initialized
[   13.443839] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   13.447132] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.448405] usbcore: registered new interface driver btusb
[   13.450909] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   13.450914] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   13.451029] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.451046] iwl3945 0000:10:00.0: setting latency timer to 64
[   13.471274] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.471282] i915 0000:00:02.0: setting latency timer to 64
[   13.507997] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   13.508030] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   13.508189] iwl3945 0000:10:00.0: irq 45 for MSI/MSI-X
[   13.530569] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[   13.530578] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.530581] [drm] Driver supports precise vblank timestamp query.
[   13.530661] Registered led device: phy0-led
[   13.530704] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   13.565766] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   13.584077] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.770274] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.770278] Bluetooth: BNEP filters: protocol multicast
[   13.796389] Bluetooth: RFCOMM TTY layer initialized
[   13.796397] Bluetooth: RFCOMM socket layer initialized
[   13.796399] Bluetooth: RFCOMM ver 1.11
[   13.800577] ppdev: user-space parallel port driver
[   13.859402] type=1400 audit(1338560173.293:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=755 comm="apparmor_parser"
[   13.864726] type=1400 audit(1338560173.301:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=755 comm="apparmor_parser"
[   13.892169] [drm] initialized overlay support
[   13.903020] init: failsafe main process (720) killed by TERM signal
[   14.063177] type=1400 audit(1338560173.497:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=833 comm="apparmor_parser"
[   14.063815] type=1400 audit(1338560173.497:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
[   14.064226] type=1400 audit(1338560173.501:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
[   14.064611] type=1400 audit(1338560173.501:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=832 comm="apparmor_parser"
[   14.068525] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   14.084876] type=1400 audit(1338560173.521:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=837 comm="apparmor_parser"
[   14.109719] fbcon: inteldrmfb (fb0) is primary device
[   14.110466] Console: switching to colour frame buffer device 160x50
[   14.110502] fb0: inteldrmfb frame buffer device
[   14.110504] drm: registered panic notifier
[   14.124117] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   14.124398] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.124813] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.159058] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   14.159063] cfg80211: World regulatory domain updated:
[   14.159065] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.159069] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.159073] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.159076] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.159080] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.159083] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.215544] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[   14.237350] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20110623/exoparg2-418)
[   14.237369] ACPI Error: Method parse/execution failed [\_SB_.C003.C099._DOD] (Node f74275a0), AE_AML_PACKAGE_LIMIT (20110623/psparse-536)
[   14.237382] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20110623/video-1155)
[   14.238171] input: HP WMI hotkeys as /devices/virtual/input/input4
[   14.245217] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x200000/0x0
[   14.282906] acpi device:01: registered as cooling_device7
[   14.291671] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.291966] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.311749] init: alsa-restore main process (896) terminated with status 19
[   14.347163] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[   14.424704] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   14.425720] ACPI: Video Device [C099] (multi-head: yes  rom: no  post: no)
[   14.425816] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.443141] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   14.443152] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   14.443164] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.443261] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   14.443303] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   22.562367] wlan0: authenticate with 38:60:77:ff:ad:57 (try 1)
[   22.569276] wlan0: authenticated
[   22.569452] wlan0: associate with 38:60:77:ff:ad:57 (try 1)
[   22.572294] wlan0: RX AssocResp from 38:60:77:ff:ad:57 (capab=0x431 status=0 aid=2)
[   22.572298] wlan0: associated
[   22.575363] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   33.232058] wlan0: no IPv6 routers present
[  251.182877] wlan0: deauthenticated from 38:60:77:ff:ad:57 (Reason: 7)
[  251.208951] cfg80211: All devices are disconnected, going to restore regulatory settings
[  251.208960] cfg80211: Restoring regulatory settings
[  251.208983] cfg80211: Calling CRDA to update world regulatory domain
[  251.214253] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  251.214258] cfg80211: World regulatory domain updated:
[  251.214273] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  251.214277] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  251.214281] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  251.214284] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  251.214288] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  251.214291] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  254.888635] wlan0: authenticate with 38:60:77:ff:ad:57 (try 1)
[  254.890442] wlan0: authenticated
[  254.891354] wlan0: associate with 38:60:77:ff:ad:57 (try 1)
[  254.894178] wlan0: RX ReassocResp from 38:60:77:ff:ad:57 (capab=0x431 status=0 aid=1)
[  254.894182] wlan0: associated
arkeomuhsin@arkeomuhsin-HP-550:~$ dmesg | tail


[if]

@arkeomuhsin,

Kod Seç Genişlet

gksu gedit /etc/modprobe.d/iwl3945.conf ile açacağınız dosyanın içerisine

Kod Seç Genişlet

options iwl4965 11n_disable=1 yazıp kaydedin. Sonra bilgisayarı yeniden başlatın.

[arkeomuhsin]

bu dosyayı nerede açacağım?

[if]

@arkeomuhsin, siz sadece komut kopyalayıp yapıştırın ve içine yazmanızı söylediğim satırı yazıp kaydedin. Komut doyayı gerekli dizinde oluşturur.

[arkeomuhsin]

işlemi yaptım bilgisayarı yeniden başlattım ancak bilgisayar açıldıktan ortalama 4-5 dk sonra sayfa görüntüledi ama kablosuz internete bağlı görünüyordu. şu an problem yok.

[burk]

Öyleyse; http://forum.ubuntu-tr.net/index.php?topic=31789.0

[if]

Sorunun tekrar ettiği üyemiz tarafından rapor edildiği için konuyu açtım.

@arkeomuhsin, eğer WPA şifreleme kullanıyorsanız WEP olarak değiştirip dener misiniz?

Olmazsa bu[1] iletimdeki yöntemi dener misiniz?

İletimdeki yöntemi denedikten sonra önce

Kod Seç Genişlet

sudo lshw -c network
iwconfig
sudo rfkill list
lsmod
komutlarını çıktılarını direk buraya sonra

Kod Seç Genişlet

dmesg > dmesg.log komutunu veriniz. Ev dizininde dmesg.log adlı bir belge oluşacaktır. O belgenin içerisindekileri pastebin.com adresine yapıştırıp kaydedin ve bağlantısını buraya geçin.

[1]http://forum.ubuntu-tr.net/index.php?topic=26363.msg316596#msg316596

[if]

Kod Seç Genişlet

echo "options iwl3945 disable_hw_scan=0" | sudo tee -a /etc/modprobe.d/iwl3945.conf

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/811715