12.04 Aşırı Yavaş Açılma Sorunu

Başlatan skrblt, 29 Nisan 2012 - 16:16:13

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

skrblt

29 Nisan 2012 - 16:16:13 Son düzenlenme: 29 Nisan 2012 - 16:27:29 skrblt
Windows 7 yüklü dizüstü bilgisayarıma Ubuntu 12.04 yükledim 2 gün önce.  Win7'yi kaldırmadan yanına yükledim ancak açılması çok uzun sürüyor. bilgisayarım toshiba, i5 işlemcili, 4gb ram ve nvidia 315m ekran kartı var. 2 gündür forumda arama yapıyorum söylenen şeylerin hepsini yaptım defalarca Ubuntu'yu kaldırıp yeniden kurmam gerekti ama sorun hala aynı. Grub ekranından Ubuntuyu seçiyorum ve 130-140 saniye sürüyor açılması açılana kadar mor ekran görüyorum. Çözüm önerilerinizi bekliyorum. Ek olarak sürüm 32bit yüklü ve açıldıktan sonra çok hızlı işliyor. Kapanması 5 saniye civarında yani böyle hızlıyken açılması neden bu kadar uzun sürüyor anlamadım.

MURATSPLAT

#1
29 Nisan 2012 - 18:21:05
Linux çekirdeği kaynaklı bir sorun olabilir.

Kod Seç
cat /var/log/dmesg

Komutu ile linux çekirdeğinin olay günlüğüne bakılabilir. Bir sorun varsa fark edilebilir.

Bu arada sisteminizi kurulumdan sonra hiç güncellediniz mi ?
Donanım:
GA-MA790XT-UD4P Anakart
AMD Phenom(tm) II X4 945 Processor
2048*2 DDR3(1333MHZ) + 2048*2 DDR3(1600MHZ) = 8 GB  Asus Nvidia GeForce GT-430 1GB DDR3 128bit Samsung HD502HJ 500 GB + Samsung HD322HJ 320 GB + Western Box USB 640 GB =1.4 TB ATI Technologies Inc SBx00 Azalia (Intel HDA) SkyStar HD 2 Digital Uydu Kartı Logitech MK250

bytan

#2
29 Nisan 2012 - 18:23:42
Çıktısını da ekleyebilirsin:

Kod Seç
dmesg | tail
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.

Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

skrblt

#3
29 Nisan 2012 - 21:42:05 Son düzenlenme: 29 Nisan 2012 - 21:45:06 skrblt
Alıntı yapılan: MURATSPLAT - 29 Nisan 2012 - 18:21:05
Linux çekirdeği kaynaklı bir sorun olabilir.

Kod Seç
cat /var/log/dmesg

Komutu ile linux çekirdeğinin olay günlüğüne bakılabilir. Bir sorun varsa fark edilebilir.

Bu arada sisteminizi kurulumdan sonra hiç güncellediniz mi ?

evet her kurduktan sonra güncelledim şu anda da en güncel halinde. yazdığınız kodun çıktısı baya uzun ben de ubuntu da yeniyim buraya ekleyeyim mi?


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 29 Nisan 2012 - 21:45:06

Alıntı yapılan: bytan - 29 Nisan 2012 - 18:23:42
Çıktısını da ekleyebilirsin:

Kod Seç
dmesg | tail

sizin söylediğinizin çıktısı:
Kod Seç
[   70.522610] vesafb: scrolling: redraw
[   70.522613] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   70.524692] vesafb: framebuffer at 0xc1000000, mapped to 0xf8900000, using 1216k, total 1216k
[   70.524773] fbcon: VESA VGA (fb0) is primary device
[   70.524832] Console: switching to colour frame buffer device 80x30
[   70.524846] fb0: VESA VGA frame buffer device
[   70.547047] init: plymouth-splash main process (1324) terminated with status 1
[   70.632425] init: lightdm main process (1330) killed by TERM signal
[  110.021233] audit_printk_skb: 45 callbacks suppressed
[  110.021238] type=1400 audit(1335724482.157:27): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1797 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

heartsmagic

#4
29 Nisan 2012 - 21:56:47
Tüm çıktıyı foruma değil de bir yapıştırma hizmeti sunan siteye ekleyebilirsin:
http://paste.ubuntu.com/

Ayrıca açılışta F2'ye bastığında uçbirim üzerinden görebiliyor musun bekleme aşamasını?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

skrblt

#5
29 Nisan 2012 - 22:12:14 Son düzenlenme: 29 Nisan 2012 - 22:19:02 skrblt
Alıntı yapılan: heartsmagic - 29 Nisan 2012 - 21:56:47
Tüm çıktıyı foruma değil de bir yapıştırma hizmeti sunan siteye ekleyebilirsin:
http://paste.ubuntu.com/

Ayrıca açılışta F2'ye bastığında uçbirim üzerinden görebiliyor musun bekleme aşamasını?


Hayır göremiyorum.
Kod Seç

cat /var/log/dmesg
kodun çıktısı şurada:
http://paste.ubuntu.com/955793/

MURATSPLAT

#6
29 Nisan 2012 - 23:04:42
Alıntı yapılan: skrblt - 29 Nisan 2012 - 22:12:14
Alıntı yapılan: heartsmagic - 29 Nisan 2012 - 21:56:47
Tüm çıktıyı foruma değil de bir yapıştırma hizmeti sunan siteye ekleyebilirsin:
http://paste.ubuntu.com/

Ayrıca açılışta F2'ye bastığında uçbirim üzerinden görebiliyor musun bekleme aşamasını?


Hayır göremiyorum.
Kod Seç

cat /var/log/dmesg
kodun çıktısı şurada:
http://paste.ubuntu.com/955793/
Hepsini kopyalayamamışsın
Şunu denerek kopyalarsan tüm satırları kopyalamak daha kolay olur.
Kod Seç
gedit /var/log/dmesg


Terminalde çıktının hepsi kopyalanamıyor. şimdi fark ettim.
Donanım:
GA-MA790XT-UD4P Anakart
AMD Phenom(tm) II X4 945 Processor
2048*2 DDR3(1333MHZ) + 2048*2 DDR3(1600MHZ) = 8 GB  Asus Nvidia GeForce GT-430 1GB DDR3 128bit Samsung HD502HJ 500 GB + Samsung HD322HJ 320 GB + Western Box USB 640 GB =1.4 TB ATI Technologies Inc SBx00 Azalia (Intel HDA) SkyStar HD 2 Digital Uydu Kartı Logitech MK250

heartsmagic

#7
29 Nisan 2012 - 23:09:12
Kod Seç
dmesg > çıktı_dosyası
gedit çıktı_dosyası
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

Sametkk

#8
01 Ekim 2012 - 22:49:21
Aynı sorun bende de var bilgisayarım kerneli güncelledikten sonra çok yavaşladı 3.4.7 kernel sürümüm.

heartsmagic

#9
02 Ekim 2012 - 12:40:53
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

bijehr

#10
05 Kasım 2013 - 16:33:23
Benimki de çok yavaş açılıyor. Günlerdir bakmadığım site kalmadı, ingilizce bilmediğim için gözümden birşey illa ki kaçmıştır. Bios ayarları dahil birçok gördüğüm kodu denedim birkaç kere format attım ama çözümü bulamadım.

Dmesg : http://paste.ubuntu.com/6364922/  gözünüze çarpan birşey var mı ?

if

#11
05 Kasım 2013 - 20:53:35
@bijehr, mavidiş (bluetooth) ve yazıcı kullanıyor musunuz?

Kod Seç
cat /etc/fstab
sudo blkid

bijehr

#12
05 Kasım 2013 - 21:15:59
Alıntı yapılan: if - 05 Kasım 2013 - 20:53:35
@bijehr, mavidiş (bluetooth) ve yazıcı kullanıyor musunuz?

Kod Seç
cat /etc/fstab
sudo blkid

bluetoothu startupdan kaldırdım . yazıcı kullanmıyorum.

cat /etc/fstab : http://paste.ubuntu.com/6366330/

sudo blkid : http://paste.ubuntu.com/6366333/

bytan

#13
06 Kasım 2013 - 02:54:49
Alıntı yapılan: bijehrBenimki de çok yavaş açılıyor. Günlerdir bakmadığım site kalmadı, ingilizce bilmediğim için gözümden * bir şey illa ki kaçmıştır. Bios ayarları dahil birçok gördüğüm kodu denedim birkaç kere format attım ama çözümü bulamadım.

Dmesg : http://paste.ubuntu.com/6364922/  gözünüze çarpan * bir şey var mı ?
@bijehr,

Dmesg çıktın bu kadar mı?
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.

Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

bijehr

#14
06 Kasım 2013 - 16:01:26
dmesg : http://paste.ubuntu.com/6370600/

Daha yukarısı nasıl gösteriliyor bilmiyorum, terminalde dmesg yazıyorum görüneni kopyalıyorum, ilk dmesgde en üstte bir satırın son 3,4 karakterini gösteriyordu ama dediğim gibi tamamı nasıl gösteriliyor bilmiyorum.

bytan

#15
06 Kasım 2013 - 20:59:38
Metin düzenleyici ile bakabiliriz:

Kod Seç
gedit /var/log/dmesg
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.

Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

bytan

#17
06 Kasım 2013 - 23:53:24
@bijehr,

Açılan penceredeki son satır ile pastebin'de görünen son satır gerçekten aynı mı? Şu haliyle bakınca da yine eksik gibi görünüyor. Hem son satırları kontrol ederek hem de pastebin'i aradan çıkartarak dosya içeriğini buraya code etiketleri arasında aktarır mısın?
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.

Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

bijehr

#18
07 Kasım 2013 - 00:15:45 Son düzenlenme: 07 Kasım 2013 - 10:45:09 heartsmagic
Bilgisayarı kapatıp tekrar açtım :

gedit /var/log/dmesg ile görünen :

Kod Seç


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 (Ubuntu 3.8.0-32.47~precise1-generic 3.8.13.10)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-32-generic root=UUID=9ba6f6fa-1bad-4d82-990d-58c77db5dcd5 ro quiet splash profile vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bce3efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bce3f000-0x00000000bcebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcebf000-0x00000000bcfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfbf000-0x00000000bcffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20079                           /Base Board Product Name, BIOS 40CN31WW(V2.17) 02/22/2012
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-protect
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BD000000 mask FFF000000 uncachable
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 13FE00000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0xbcffffff]
[    0.000000]  [mem 0x00000000-0xbcffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0xbcffffff @ [mem 0x1fffc000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13fdfffff]
[    0.000000]  [mem 0x100000000-0x13fdfffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x13fdfffff @ [mem 0xbce3d000-0xbce3efff]
[    0.000000] RAMDISK: [mem 0x36104000-0x37079fff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 00000000bcffe120 00084 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 00000000bcffb000 000F4 (v04 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 00000000bcfee000 0938E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 00000000bcf6e000 00040
[    0.000000] ACPI: SLIC 00000000bcffd000 00176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 00000000bcffc000 000A5 (v32 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 00000000bcffa000 00038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 00000000bcff9000 0008C (v02 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 00000000bcff8000 0003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 00000000bcfed000 00224 (v01 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bcfec000 006FE (v01 INSYDE HR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 00000000bcfea000 00028 (v01 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 00000000bcfe7000 00034 (v07 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bcfe6000 0090C (v01 INSYDE HR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bcfe5000 00996 (v01 INSYDE HR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fdfffff]
[    0.000000]   NODE_DATA [mem 0x13fdfb000-0x13fdfffff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b400000-ffff88013f3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xbce3efff]
[    0.000000]   node   0: [mem 0xbcfff000-0xbcffffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fdfffff]
[    0.000000] On node 0 totalpages: 1034189
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 141 pages reserved
[    0.000000]   DMA zone: 3776 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12009 pages used for memmap
[    0.000000]   DMA32 zone: 756567 pages, LIFO batch:31
[    0.000000]   Normal zone: 4088 pages used for memmap
[    0.000000]   Normal zone: 257544 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000bce3f000 - 00000000bcebf000
[    0.000000] PM: Registered nosave memory: 00000000bcebf000 - 00000000bcfbf000
[    0.000000] PM: Registered nosave memory: 00000000bcfbf000 - 00000000bcfff000
[    0.000000] PM: Registered nosave memory: 00000000bd000000 - 00000000bfa00000
[    0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fa00000 s84928 r8192 d21568 u262144
[    0.000000] pcpu-alloc: s84928 r8192 d21568 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1017887
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-32-generic root=UUID=9ba6f6fa-1bad-4d82-990d-58c77db5dcd5 ro quiet splash profile vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3972056k/5240832k available (7171k kernel code, 1104076k absent, 164700k reserved, 6071k data, 1012k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2195.097 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.19 BogoMIPS (lpj=8780388)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000028] Security Framework initialized
[    0.000040] AppArmor: AppArmor initialized
[    0.000041] Yama: becoming mindful.
[    0.000351] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001383] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001840] Mount-cache hash table entries: 256
[    0.002019] Initializing cgroup subsys cpuacct
[    0.002021] Initializing cgroup subsys memory
[    0.002027] Initializing cgroup subsys devices
[    0.002029] Initializing cgroup subsys freezer
[    0.002030] Initializing cgroup subsys blkio
[    0.002032] Initializing cgroup subsys perf_event
[    0.002034] Initializing cgroup subsys hugetlb
[    0.002058] CPU: Physical Processor ID: 0
[    0.002059] CPU: Processor Core ID: 0
[    0.002063] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002063] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002066] mce: CPU supports 7 MCE banks
[    0.002076] CPU0: Thermal monitoring handled by SMI
[    0.002083] process: using mwait in idle threads
[    0.002087] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.002087] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002087] tlb_flushall_shift: 5
[    0.002226] Freeing SMP alternatives: 24k freed
[    0.005000] ACPI: Core revision 20121018
[    0.027299] ftrace: allocating 29361 entries in 115 pages
[    0.043426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.083070] smpboot: CPU0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz (fam: 06, model: 2a, stepping: 07)
[    0.083079] TSC deadline timer enabled
[    0.083083] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.083090] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.083092] ... version:                3
[    0.083093] ... bit width:              48
[    0.083094] ... generic registers:      8
[    0.083096] ... value mask:             0000ffffffffffff
[    0.083097] ... max period:             000000007fffffff
[    0.083098] ... fixed-purpose events:   3
[    0.083099] ... event mask:             00000007000000ff
[    0.095234] CPU1: Thermal monitoring handled by SMI
[    0.084296] smpboot: Booting Node   0, Processors  #1
[    0.097326] Brought up 2 CPUs
[    0.097330] smpboot: Total of 2 processors activated (8780.38 BogoMIPS)
[    0.097443] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.098847] devtmpfs: initialized
[    0.099682] EVM: security.selinux
[    0.099684] EVM: security.SMACK64
[    0.099685] EVM: security.capability
[    0.099737] PM: Registering ACPI NVS region [mem 0xbcebf000-0xbcfbefff] (1048576 bytes)
[    0.100515] regulator-dummy: no parameters
[    0.100562] NET: Registered protocol family 16
[    0.100706] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.100708] ACPI: bus type pci registered
[    0.100772] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.100775] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.107687] PCI: Using configuration type 1 for base access
[    0.108505] bio: create slab <bio-0> at 0
[    0.108595] ACPI: Added _OSI(Module Device)
[    0.108597] ACPI: Added _OSI(Processor Device)
[    0.108599] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.108600] ACPI: Added _OSI(Processor Aggregator Device)
[    0.110142] ACPI: EC: Look up EC in DSDT
[    0.111635] ACPI: Executed 1 blocks of module-level executable AML code
[    0.114425] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.115536] ACPI: SSDT 00000000bce70718 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.115928] ACPI: Dynamic OEM Table Load:
[    0.115930] ACPI: SSDT           (null) 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.116202] ACPI: SSDT 00000000bce71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.116624] ACPI: Dynamic OEM Table Load:
[    0.116626] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.116742] ACPI: SSDT 00000000bce6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.117130] ACPI: Dynamic OEM Table Load:
[    0.117133] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.121816] ACPI: Interpreter enabled
[    0.121819] ACPI: (supports S0 S3 S4 S5)
[    0.121839] ACPI: Using IOAPIC for interrupt routing
[    0.243414] ACPI: Power Resource [FN00] (off)
[    0.243484] ACPI: Power Resource [FN01] (off)
[    0.244445] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.244585] ACPI: No dock devices found.
[    0.244589] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.244849] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.244851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.245115] \_SB_.PCI0:_OSC invalid UUID
[    0.245116] _OSC request data:1 8 0
[    0.245603] PCI host bridge to bus 0000:00
[    0.245606] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.245608] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.245610] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.245612] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.245614] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[    0.245623] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.245663] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[    0.245675] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[    0.245682] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.245686] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.245744] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.245769] pci 0000:00:16.0: reg 10: [mem 0xd0604000-0xd060400f 64bit]
[    0.245849] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.245887] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.246151] pci 0000:00:1a.0: reg 10: [mem 0xd060a000-0xd060a3ff]
[    0.247627] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.247656] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.247672] pci 0000:00:1b.0: reg 10: [mem 0xd0600000-0xd0603fff 64bit]
[    0.247745] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.247771] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.247855] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.247884] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.247967] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.248005] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.248257] pci 0000:00:1d.0: reg 10: [mem 0xd0609000-0xd06093ff]
[    0.249736] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.249763] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.249894] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.249915] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.249923] pci 0000:00:1f.2: reg 14: [io  0x309c-0x309f]
[    0.249932] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.249941] pci 0000:00:1f.2: reg 1c: [io  0x3098-0x309b]
[    0.249950] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.249958] pci 0000:00:1f.2: reg 24: [mem 0xd0608000-0xd06087ff]
[    0.250008] pci 0000:00:1f.2: PME# supported from D3hot
[    0.250028] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.250045] pci 0000:00:1f.3: reg 10: [mem 0xd0606000-0xd06060ff 64bit]
[    0.250067] pci 0000:00:1f.3: reg 20: [io  0x3040-0x305f]
[    0.250225] pci 0000:01:00.0: [1969:2062] type 00 class 0x020000
[    0.250332] pci 0000:01:00.0: reg 10: [mem 0xd0500000-0xd053ffff 64bit]
[    0.250377] pci 0000:01:00.0: reg 18: [io  0x2000-0x207f]
[    0.250854] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.257385] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.257396] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.257406] pci 0000:00:1c.0:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.257573] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
[    0.257609] pci 0000:02:00.0: reg 10: [mem 0xd0400000-0xd0403fff 64bit]
[    0.257799] pci 0000:02:00.0: supports D1 D2
[    0.257801] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.265388] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.265403] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.265495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.265527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.265612] \_SB_.PCI0:_OSC invalid UUID
[    0.265613] _OSC request data:1 1f 0
[    0.265617]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.265618]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.266089] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    0.266134] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.266177] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.266219] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.266261] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.266306] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.266347] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.266389] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.266483] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.266486] vgaarb: loaded
[    0.266487] vgaarb: bridge control possible 0000:00:02.0
[    0.266650] SCSI subsystem initialized
[    0.266652] ACPI: bus type scsi registered
[    0.266687] libata version 3.00 loaded.
[    0.266706] ACPI: bus type usb registered
[    0.266722] usbcore: registered new interface driver usbfs
[    0.266733] usbcore: registered new interface driver hub
[    0.266756] usbcore: registered new device driver usb
[    0.266839] PCI: Using ACPI for IRQ routing
[    0.268488] PCI: pci_cache_line_size set to 64 bytes
[    0.268580] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.268582] e820: reserve RAM buffer [mem 0xbce3f000-0xbfffffff]
[    0.268583] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[    0.268585] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff]
[    0.268667] NetLabel: Initializing
[    0.268668] NetLabel:  domain hash size = 128
[    0.268669] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.268678] NetLabel:  unlabeled traffic allowed by default
[    0.268735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.268741] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.270754] Switching to clocksource hpet
[    0.275777] AppArmor: AppArmor Filesystem Enabled
[    0.275802] pnp: PnP ACPI init
[    0.275815] ACPI: bus type pnp registered
[    0.275849] pnp 00:00: [dma 4]
[    0.275868] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.275886] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.275985] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.276013] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.276055] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.276058] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.276060] system 00:04: [io  0x1010-0x1013] has been reserved
[    0.276062] system 00:04: [io  0xffff] has been reserved
[    0.276064] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.276066] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.276068] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.276070] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.276072] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.276094] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.276129] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.276132] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.334931] pnp 00:07: Plug and Play ACPI device, IDs SYN0730 SYN0700 SYN0002 PNP0f13 (active)
[    0.335118] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.335237] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.335242] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.335244] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.335246] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.335248] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.335250] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.335252] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.335255] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.335257] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.335259] system 00:09: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.335262] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335487] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    0.335489] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved
[    0.335492] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.335510] pnp: PnP ACPI: found 11 devices
[    0.335512] ACPI: ACPI bus type pnp unregistered
[    0.341618] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.341623] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.341629] pci 0000:00:1c.0:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.341638] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.341643] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.341675] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.341677] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.341679] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.341681] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.341683] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.341685] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff]
[    0.341687] pci_bus 0000:02: resource 1 [mem 0xd0400000-0xd04fffff]
[    0.341717] NET: Registered protocol family 2
[    0.341864] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.341988] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.342072] TCP: Hash tables configured (established 32768 bind 32768)
[    0.342097] TCP: reno registered
[    0.342106] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.342124] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.342189] NET: Registered protocol family 1
[    0.342201] pci 0000:00:02.0: Boot video device
[    0.370756] PCI: CLS 64 bytes, default 64
[    0.370834] Trying to unpack rootfs image as initramfs...
[    0.643898] Freeing initrd memory: 15832k freed
[    0.646151] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.646157] software IO TLB [mem 0xb8e3d000-0xbce3d000] (64MB) mapped at [ffff8800b8e3d000-ffff8800bce3cfff]
[    0.646197] Simple Boot Flag at 0x44 set to 0x1
[    0.646510] Initialise module verification
[    0.646549] audit: initializing netlink socket (disabled)
[    0.646559] type=2000 audit(1383775952.632:1): initialized
[    0.676253] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.677536] VFS: Disk quotas dquot_6.5.2
[    0.677575] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.677976] fuse init (API version 7.20)
[    0.678040] msgmni has been set to 7788
[    0.678384] Key type asymmetric registered
[    0.678386] Asymmetric key parser 'x509' registered
[    0.678416] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.678437] io scheduler noop registered
[    0.678439] io scheduler deadline registered (default)
[    0.678444] io scheduler cfq registered
[    0.678607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.678619] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.678654] intel_idle: MWAIT substates: 0x21120
[    0.678655] intel_idle: v0.4 model 0x2A
[    0.678656] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.679182] ACPI: AC Adapter [ACAD] (on-line)
[    0.679239] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    0.679243] ACPI: Power Button [PWRB]
[    0.679269] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
[    0.679272] ACPI: Sleep Button [SLPB]
[    0.679307] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.679401] ACPI: Lid Switch [LID0]
[    0.679431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.679433] ACPI: Power Button [PWRF]
[    0.679480] ACPI: Fan [FAN0] (off)
[    0.679501] ACPI: Fan [FAN1] (off)
[    0.679545] ACPI: Requesting acpi_cpufreq
[    0.802738] thermal LNXTHERM:00: registered as thermal_zone0
[    0.802741] ACPI: Thermal Zone [TZ00] (0 C)
[    0.802764] GHES: HEST is not enabled!
[    0.802824] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.006823] ACPI: Battery Slot [BAT1] (battery present)
[    1.006906] Linux agpgart interface v0.103
[    1.007977] brd: module loaded
[    1.008504] loop: module loaded
[    1.008772] libphy: Fixed MDIO Bus: probed
[    1.008821] tun: Universal TUN/TAP device driver, 1.6
[    1.008822] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.008860] PPP generic driver version 2.4.2
[    1.008894] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.008895] ehci-pci: EHCI PCI platform driver
[    1.008931] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    1.008935] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.008940] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.008955] ehci-pci 0000:00:1a.0: debug port 2
[    1.012849] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.012866] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd060a000
[    1.021965] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.022008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.022014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.022019] usb usb1: Product: EHCI Host Controller
[    1.022024] usb usb1: Manufacturer: Linux 3.8.0-32-generic ehci_hcd
[    1.022029] usb usb1: SerialNumber: 0000:00:1a.0
[    1.022165] hub 1-0:1.0: USB hub found
[    1.022169] hub 1-0:1.0: 2 ports detected
[    1.022258] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.022262] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.022267] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.022279] ehci-pci 0000:00:1d.0: debug port 2
[    1.026171] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.026183] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0609000
[    1.037948] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.037979] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.037985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.037989] usb usb2: Product: EHCI Host Controller
[    1.037995] usb usb2: Manufacturer: Linux 3.8.0-32-generic ehci_hcd
[    1.037999] usb usb2: SerialNumber: 0000:00:1d.0
[    1.038130] hub 2-0:1.0: USB hub found
[    1.038133] hub 2-0:1.0: 2 ports detected
[    1.038199] ehci-platform: EHCI generic platform driver
[    1.038205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.038215] uhci_hcd: USB Universal Host Controller Interface driver
[    1.038264] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.080382] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.080387] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.080475] mousedev: PS/2 mouse device common for all mice
[    1.082497] rtc_cmos 00:05: RTC can wake from S4
[    1.082613] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.082641] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.082718] device-mapper: uevent: version 1.0.3
[    1.082769] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    1.082808] cpuidle: using governor ladder
[    1.082852] cpuidle: using governor menu
[    1.082857] ledtrig-cpu: registered to indicate activity on CPUs
[    1.082858] EFI Variables Facility v0.08 2004-May-17
[    1.083012] ashmem: initialized
[    1.083115] TCP: cubic registered
[    1.083196] NET: Registered protocol family 10
[    1.083337] NET: Registered protocol family 17
[    1.083348] Key type dns_resolver registered
[    1.083520] Loading module verification certificates
[    1.084481] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 67fe864d210c67cc00cf9be046731e83c3c8b84c'
[    1.084492] registered taskstats version 1
[    1.086376] Key type trusted registered
[    1.087973] Key type encrypted registered
[    1.089948] rtc_cmos 00:05: setting system clock to 2013-11-06 22:12:33 UTC (1383775953)
[    1.090338] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.090340] EDD information not available.
[    1.091968] Freeing unused kernel memory: 1012k freed
[    1.092107] Write protecting the kernel read-only data: 12288k
[    1.095105] Freeing unused kernel memory: 1008k freed
[    1.098185] Freeing unused kernel memory: 1008k freed
[    1.112834] udevd[96]: starting version 175
[    1.121068] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.151918] Disabling lock debugging due to kernel taint
[    1.154501] ahci 0000:00:1f.2: version 3.0
[    1.154566] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.154598] ahci: SSS flag set, parallel bus scan disabled
[    1.169846] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.169851] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[    1.169858] ahci 0000:00:1f.2: setting latency timer to 64
[    1.181611] scsi0 : ahci
[    1.183689] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    1.183708] scsi1 : ahci
[    1.187194] scsi2 : ahci
[    1.188433] scsi3 : ahci
[    1.190012] scsi4 : ahci
[    1.190886] scsi5 : ahci
[    1.190955] ata1: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608100 irq 40
[    1.190957] ata2: DUMMY
[    1.190960] ata3: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608200 irq 40
[    1.190962] ata4: DUMMY
[    1.190963] ata5: DUMMY
[    1.190964] ata6: DUMMY
[    1.333730] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.465981] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.465992] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.466348] hub 1-1:1.0: USB hub found
[    1.466445] hub 1-1:1.0: 6 ports detected
[    1.509529] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.510718] ata1.00: ATA-8: HITACHI HTS547550A9E384, JE3ZD60D, max UDMA/100
[    1.510729] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.511971] ata1.00: configured for UDMA/100
[    1.512281] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54755 JE3Z PQ: 0 ANSI: 5
[    1.512447] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.512526] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.512529] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.512589] sd 0:0:0:0: [sda] Write Protect is off
[    1.512591] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.512618] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.574614]  sda: sda1 sda2 < sda5 >
[    1.575211] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.577387] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.641370] tsc: Refined TSC clocksource calibration: 2195.017 MHz
[    1.641385] Switching to clocksource tsc
[    1.709714] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.709726] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.710106] hub 2-1:1.0: USB hub found
[    1.710290] hub 2-1:1.0: 6 ports detected
[    1.781343] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.829266] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.841883] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B1AS, 8.21, max UDMA/100
[    1.865488] ata3.00: configured for UDMA/100
[    1.874026] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
[    1.874036] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.874042] usb 1-1.4: Product: USB2.0-CRW
[    1.874047] usb 1-1.4: Manufacturer: Generic
[    1.874052] usb 1-1.4: SerialNumber: 20100201396000000
[    1.877900] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B1AS  8.21 PQ: 0 ANSI: 5
[    1.892288] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.892298] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.892470] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.892526] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.945025] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    2.041535] usb 1-1.6: New USB device found, idVendor=0489, idProduct=e00d
[    2.041546] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.041552] usb 1-1.6: Product: Broadcom Bluetooth 2.1 Device
[    2.041563] usb 1-1.6: Manufacturer: Broadcom Corp
[    2.041565] usb 1-1.6: SerialNumber: 642737898435
[    2.112853] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    2.207854] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52f
[    2.207864] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.207870] usb 2-1.1: Product: USB Receiver
[    2.207875] usb 2-1.1: Manufacturer: Logitech
[    2.213810] usbcore: registered new interface driver usbhid
[    2.213817] usbhid: USB HID core driver
[    2.215681] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5
[    2.215898] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[    2.216789] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input6
[    2.217362] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[    2.280761] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[    2.388047] usb 2-1.6: New USB device found, idVendor=5986, idProduct=0292
[    2.388052] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.388054] usb 2-1.6: Product: Lenovo EasyCamera
[    2.388056] usb 2-1.6: Manufacturer: Bison Corp.
[    2.468167] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.957693] init: ureadahead main process (285) terminated with status 5
[    5.120645] Adding 4135932k swap on /dev/sda5.  Priority:-1 extents:1 across:4135932k
[    6.443959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.679125] udevd[361]: starting version 175
[    6.712123] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.805201] lp: driver loaded but no devices found
[    8.417634] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[    8.417642] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.417646] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    8.417649] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.417651] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    8.417654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.417655] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    8.417658] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.417659] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.516306] mei 0000:00:16.0: setting latency timer to 64
[    8.516367] mei 0000:00:16.0: irq 41 for MSI/MSI-X
[    8.633995] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[    8.634030] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[    8.634056] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[    8.634108] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[    8.645693] bcma: bus0: Bus registered
[    8.685453] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[    8.716852] input: Ideapad extra buttons as /devices/platform/ideapad/input/input7
[    9.075091] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[    9.076488] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    9.276988] Bluetooth: Core ver 2.16
[    9.277010] NET: Registered protocol family 31
[    9.277012] Bluetooth: HCI device and connection manager initialized
[    9.277019] Bluetooth: HCI socket layer initialized
[    9.277022] Bluetooth: L2CAP socket layer initialized
[    9.277027] Bluetooth: SCO socket layer initialized
[    9.336222] [drm] Initialized drm 1.1.0 20060810
[    9.394874] cfg80211: Calling CRDA to update world regulatory domain
[    9.616463] usbcore: registered new interface driver btusb
[    9.815520] [drm] Memory usable by graphics device = 2048M
[    9.815527] i915 0000:00:02.0: setting latency timer to 64
[    9.849261] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    9.849288] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.849289] [drm] Driver supports precise vblank timestamp query.
[    9.849329] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.955421] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[    9.960237] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    9.964446] scsi6 : SCSI emulation for RTS5139 USB card reader
[    9.964711] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    9.965084] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    9.965224] usbcore: registered new interface driver rts5139
[    9.968290] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   10.032738] fbcon: inteldrmfb (fb0) is primary device
[   10.113095] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   10.152730] Linux video capture interface: v2.00
[   10.287587] type=1400 audit(1383775962.706:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=686 comm="apparmor_parser"
[   10.287597] type=1400 audit(1383775962.706:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=729 comm="apparmor_parser"
[   10.287962] type=1400 audit(1383775962.706:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser"
[   10.287971] type=1400 audit(1383775962.706:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=686 comm="apparmor_parser"
[   10.288162] type=1400 audit(1383775962.706:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=729 comm="apparmor_parser"
[   10.288172] type=1400 audit(1383775962.706:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=686 comm="apparmor_parser"
[   10.350436] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0292)
[   10.352276] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input9
[   10.352370] usbcore: registered new interface driver uvcvideo
[   10.352370] USB Video Class driver (1.1.1)
[   10.370393] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.767416] Console: switching to colour frame buffer device 170x48
[   10.770031] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.770034] i915 0000:00:02.0: registered panic notifier
[   10.777749] acpi device:34: registered as cooling_device4
[   10.777893] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.778488] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[   10.778859] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.778973] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   10.971551] hda_codec: CX20590: BIOS auto-probing.
[   10.974432] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.974498] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.196618] init: failsafe main process (786) killed by TERM signal
[   11.810524] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   12.657136] ppdev: user-space parallel port driver
[   12.970485] Bluetooth: RFCOMM TTY layer initialized
[   12.970497] Bluetooth: RFCOMM socket layer initialized
[   12.970499] Bluetooth: RFCOMM ver 1.11
[   13.088624] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.088627] Bluetooth: BNEP filters: protocol multicast
[   13.088635] Bluetooth: BNEP socket layer initialized
[   13.676974] type=1400 audit(1383775966.098:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=900 comm="apparmor_parser"
[   13.677391] type=1400 audit(1383775966.098:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=900 comm="apparmor_parser"
[   15.726895] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
[   15.744325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.751658] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.811094] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   15.811143] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[   15.811751] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.814194] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.589405] type=1400 audit(1383775970.014:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=975 comm="apparmor_parser"
[   17.589781] type=1400 audit(1383775970.014:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=975 comm="apparmor_parser"
[   17.589984] type=1400 audit(1383775970.014:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=975 comm="apparmor_parser"
[   17.621225] type=1400 audit(1383775970.046:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=974 comm="apparmor_parser"
[   17.621520] type=1400 audit(1383775970.046:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=974 comm="apparmor_parser"
[   17.640701] type=1400 audit(1383775970.066:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=978 comm="apparmor_parser"
[   17.641120] type=1400 audit(1383775970.066:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=978 comm="apparmor_parser"
[   17.644495] type=1400 audit(1383775970.070:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=979 comm="apparmor_parser"
[   17.644927] type=1400 audit(1383775970.070:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=979 comm="apparmor_parser"
[   17.657097] type=1400 audit(1383775970.082:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=981 comm="apparmor_parser"



dmesg ile görünen :
Kod Seç


[    0.265495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.265527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.265612] \_SB_.PCI0:_OSC invalid UUID
[    0.265613] _OSC request data:1 1f 0
[    0.265617]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.265618]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.266089] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    0.266134] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.266177] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.266219] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.266261] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.266306] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.266347] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.266389] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.266483] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.266486] vgaarb: loaded
[    0.266487] vgaarb: bridge control possible 0000:00:02.0
[    0.266650] SCSI subsystem initialized
[    0.266652] ACPI: bus type scsi registered
[    0.266687] libata version 3.00 loaded.
[    0.266706] ACPI: bus type usb registered
[    0.266722] usbcore: registered new interface driver usbfs
[    0.266733] usbcore: registered new interface driver hub
[    0.266756] usbcore: registered new device driver usb
[    0.266839] PCI: Using ACPI for IRQ routing
[    0.268488] PCI: pci_cache_line_size set to 64 bytes
[    0.268580] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.268582] e820: reserve RAM buffer [mem 0xbce3f000-0xbfffffff]
[    0.268583] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[    0.268585] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff]
[    0.268667] NetLabel: Initializing
[    0.268668] NetLabel:  domain hash size = 128
[    0.268669] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.268678] NetLabel:  unlabeled traffic allowed by default
[    0.268735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.268741] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.270754] Switching to clocksource hpet
[    0.275777] AppArmor: AppArmor Filesystem Enabled
[    0.275802] pnp: PnP ACPI init
[    0.275815] ACPI: bus type pnp registered
[    0.275849] pnp 00:00: [dma 4]
[    0.275868] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.275886] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.275985] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.276013] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.276055] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.276058] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.276060] system 00:04: [io  0x1010-0x1013] has been reserved
[    0.276062] system 00:04: [io  0xffff] has been reserved
[    0.276064] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.276066] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.276068] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.276070] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.276072] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.276094] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.276129] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.276132] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.334931] pnp 00:07: Plug and Play ACPI device, IDs SYN0730 SYN0700 SYN0002 PNP0f13 (active)
[    0.335118] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.335237] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.335242] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.335244] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.335246] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.335248] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.335250] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.335252] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.335255] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.335257] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.335259] system 00:09: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.335262] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335487] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    0.335489] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved
[    0.335492] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.335510] pnp: PnP ACPI: found 11 devices
[    0.335512] ACPI: ACPI bus type pnp unregistered
[    0.341618] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.341623] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.341629] pci 0000:00:1c.0:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.341638] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.341643] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.341675] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.341677] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.341679] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.341681] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.341683] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.341685] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff]
[    0.341687] pci_bus 0000:02: resource 1 [mem 0xd0400000-0xd04fffff]
[    0.341717] NET: Registered protocol family 2
[    0.341864] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.341988] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.342072] TCP: Hash tables configured (established 32768 bind 32768)
[    0.342097] TCP: reno registered
[    0.342106] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.342124] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.342189] NET: Registered protocol family 1
[    0.342201] pci 0000:00:02.0: Boot video device
[    0.370756] PCI: CLS 64 bytes, default 64
[    0.370834] Trying to unpack rootfs image as initramfs...
[    0.643898] Freeing initrd memory: 15832k freed
[    0.646151] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.646157] software IO TLB [mem 0xb8e3d000-0xbce3d000] (64MB) mapped at [ffff8800b8e3d000-ffff8800bce3cfff]
[    0.646197] Simple Boot Flag at 0x44 set to 0x1
[    0.646510] Initialise module verification
[    0.646549] audit: initializing netlink socket (disabled)
[    0.646559] type=2000 audit(1383775952.632:1): initialized
[    0.676253] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.677536] VFS: Disk quotas dquot_6.5.2
[    0.677575] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.677976] fuse init (API version 7.20)
[    0.678040] msgmni has been set to 7788
[    0.678384] Key type asymmetric registered
[    0.678386] Asymmetric key parser 'x509' registered
[    0.678416] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.678437] io scheduler noop registered
[    0.678439] io scheduler deadline registered (default)
[    0.678444] io scheduler cfq registered
[    0.678607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.678619] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.678654] intel_idle: MWAIT substates: 0x21120
[    0.678655] intel_idle: v0.4 model 0x2A
[    0.678656] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.679182] ACPI: AC Adapter [ACAD] (on-line)
[    0.679239] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    0.679243] ACPI: Power Button [PWRB]
[    0.679269] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
[    0.679272] ACPI: Sleep Button [SLPB]
[    0.679307] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.679401] ACPI: Lid Switch [LID0]
[    0.679431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.679433] ACPI: Power Button [PWRF]
[    0.679480] ACPI: Fan [FAN0] (off)
[    0.679501] ACPI: Fan [FAN1] (off)
[    0.679545] ACPI: Requesting acpi_cpufreq
[    0.802738] thermal LNXTHERM:00: registered as thermal_zone0
[    0.802741] ACPI: Thermal Zone [TZ00] (0 C)
[    0.802764] GHES: HEST is not enabled!
[    0.802824] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.006823] ACPI: Battery Slot [BAT1] (battery present)
[    1.006906] Linux agpgart interface v0.103
[    1.007977] brd: module loaded
[    1.008504] loop: module loaded
[    1.008772] libphy: Fixed MDIO Bus: probed
[    1.008821] tun: Universal TUN/TAP device driver, 1.6
[    1.008822] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.008860] PPP generic driver version 2.4.2
[    1.008894] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.008895] ehci-pci: EHCI PCI platform driver
[    1.008931] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    1.008935] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.008940] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.008955] ehci-pci 0000:00:1a.0: debug port 2
[    1.012849] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.012866] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd060a000
[    1.021965] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.022008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.022014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.022019] usb usb1: Product: EHCI Host Controller
[    1.022024] usb usb1: Manufacturer: Linux 3.8.0-32-generic ehci_hcd
[    1.022029] usb usb1: SerialNumber: 0000:00:1a.0
[    1.022165] hub 1-0:1.0: USB hub found
[    1.022169] hub 1-0:1.0: 2 ports detected
[    1.022258] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.022262] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.022267] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.022279] ehci-pci 0000:00:1d.0: debug port 2
[    1.026171] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.026183] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0609000
[    1.037948] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.037979] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.037985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.037989] usb usb2: Product: EHCI Host Controller
[    1.037995] usb usb2: Manufacturer: Linux 3.8.0-32-generic ehci_hcd
[    1.037999] usb usb2: SerialNumber: 0000:00:1d.0
[    1.038130] hub 2-0:1.0: USB hub found
[    1.038133] hub 2-0:1.0: 2 ports detected
[    1.038199] ehci-platform: EHCI generic platform driver
[    1.038205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.038215] uhci_hcd: USB Universal Host Controller Interface driver
[    1.038264] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.080382] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.080387] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.080475] mousedev: PS/2 mouse device common for all mice
[    1.082497] rtc_cmos 00:05: RTC can wake from S4
[    1.082613] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.082641] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.082718] device-mapper: uevent: version 1.0.3
[    1.082769] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    1.082808] cpuidle: using governor ladder
[    1.082852] cpuidle: using governor menu
[    1.082857] ledtrig-cpu: registered to indicate activity on CPUs
[    1.082858] EFI Variables Facility v0.08 2004-May-17
[    1.083012] ashmem: initialized
[    1.083115] TCP: cubic registered
[    1.083196] NET: Registered protocol family 10
[    1.083337] NET: Registered protocol family 17
[    1.083348] Key type dns_resolver registered
[    1.083520] Loading module verification certificates
[    1.084481] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 67fe864d210c67cc00cf9be046731e83c3c8b84c'
[    1.084492] registered taskstats version 1
[    1.086376] Key type trusted registered
[    1.087973] Key type encrypted registered
[    1.089948] rtc_cmos 00:05: setting system clock to 2013-11-06 22:12:33 UTC (1383775953)
[    1.090338] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.090340] EDD information not available.
[    1.091968] Freeing unused kernel memory: 1012k freed
[    1.092107] Write protecting the kernel read-only data: 12288k
[    1.095105] Freeing unused kernel memory: 1008k freed
[    1.098185] Freeing unused kernel memory: 1008k freed
[    1.112834] udevd[96]: starting version 175
[    1.121068] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.151918] Disabling lock debugging due to kernel taint
[    1.154501] ahci 0000:00:1f.2: version 3.0
[    1.154566] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.154598] ahci: SSS flag set, parallel bus scan disabled
[    1.169846] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.169851] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[    1.169858] ahci 0000:00:1f.2: setting latency timer to 64
[    1.181611] scsi0 : ahci
[    1.183689] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    1.183708] scsi1 : ahci
[    1.187194] scsi2 : ahci
[    1.188433] scsi3 : ahci
[    1.190012] scsi4 : ahci
[    1.190886] scsi5 : ahci
[    1.190955] ata1: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608100 irq 40
[    1.190957] ata2: DUMMY
[    1.190960] ata3: SATA max UDMA/133 abar m2048@0xd0608000 port 0xd0608200 irq 40
[    1.190962] ata4: DUMMY
[    1.190963] ata5: DUMMY
[    1.190964] ata6: DUMMY
[    1.333730] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.465981] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.465992] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.466348] hub 1-1:1.0: USB hub found
[    1.466445] hub 1-1:1.0: 6 ports detected
[    1.509529] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.510718] ata1.00: ATA-8: HITACHI HTS547550A9E384, JE3ZD60D, max UDMA/100
[    1.510729] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.511971] ata1.00: configured for UDMA/100
[    1.512281] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54755 JE3Z PQ: 0 ANSI: 5
[    1.512447] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.512526] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.512529] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.512589] sd 0:0:0:0: [sda] Write Protect is off
[    1.512591] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.512618] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.574614]  sda: sda1 sda2 < sda5 >
[    1.575211] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.577387] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.641370] tsc: Refined TSC clocksource calibration: 2195.017 MHz
[    1.641385] Switching to clocksource tsc
[    1.709714] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.709726] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.710106] hub 2-1:1.0: USB hub found
[    1.710290] hub 2-1:1.0: 6 ports detected
[    1.781343] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.829266] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.841883] ata3.00: ATAPI: MATSHITADVD-RAM UJ8B1AS, 8.21, max UDMA/100
[    1.865488] ata3.00: configured for UDMA/100
[    1.874026] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
[    1.874036] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.874042] usb 1-1.4: Product: USB2.0-CRW
[    1.874047] usb 1-1.4: Manufacturer: Generic
[    1.874052] usb 1-1.4: SerialNumber: 20100201396000000
[    1.877900] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B1AS  8.21 PQ: 0 ANSI: 5
[    1.892288] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.892298] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.892470] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.892526] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.945025] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    2.041535] usb 1-1.6: New USB device found, idVendor=0489, idProduct=e00d
[    2.041546] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.041552] usb 1-1.6: Product: Broadcom Bluetooth 2.1 Device
[    2.041563] usb 1-1.6: Manufacturer: Broadcom Corp
[    2.041565] usb 1-1.6: SerialNumber: 642737898435
[    2.112853] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    2.207854] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52f
[    2.207864] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.207870] usb 2-1.1: Product: USB Receiver
[    2.207875] usb 2-1.1: Manufacturer: Logitech
[    2.213810] usbcore: registered new interface driver usbhid
[    2.213817] usbhid: USB HID core driver
[    2.215681] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5
[    2.215898] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[    2.216789] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input6
[    2.217362] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[    2.280761] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[    2.388047] usb 2-1.6: New USB device found, idVendor=5986, idProduct=0292
[    2.388052] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.388054] usb 2-1.6: Product: Lenovo EasyCamera
[    2.388056] usb 2-1.6: Manufacturer: Bison Corp.
[    2.468167] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.957693] init: ureadahead main process (285) terminated with status 5
[    5.120645] Adding 4135932k swap on /dev/sda5.  Priority:-1 extents:1 across:4135932k
[    6.443959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.679125] udevd[361]: starting version 175
[    6.712123] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.805201] lp: driver loaded but no devices found
[    8.417634] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[    8.417642] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.417646] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    8.417649] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.417651] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    8.417654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.417655] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    8.417658] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.417659] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.516306] mei 0000:00:16.0: setting latency timer to 64
[    8.516367] mei 0000:00:16.0: irq 41 for MSI/MSI-X
[    8.633995] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[    8.634030] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[    8.634056] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[    8.634108] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[    8.645693] bcma: bus0: Bus registered
[    8.685453] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[    8.716852] input: Ideapad extra buttons as /devices/platform/ideapad/input/input7
[    9.075091] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[    9.076488] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    9.276988] Bluetooth: Core ver 2.16
[    9.277010] NET: Registered protocol family 31
[    9.277012] Bluetooth: HCI device and connection manager initialized
[    9.277019] Bluetooth: HCI socket layer initialized
[    9.277022] Bluetooth: L2CAP socket layer initialized
[    9.277027] Bluetooth: SCO socket layer initialized
[    9.336222] [drm] Initialized drm 1.1.0 20060810
[    9.394874] cfg80211: Calling CRDA to update world regulatory domain
[    9.616463] usbcore: registered new interface driver btusb
[    9.815520] [drm] Memory usable by graphics device = 2048M
[    9.815527] i915 0000:00:02.0: setting latency timer to 64
[    9.849261] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    9.849288] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.849289] [drm] Driver supports precise vblank timestamp query.
[    9.849329] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.955421] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[    9.960237] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    9.964446] scsi6 : SCSI emulation for RTS5139 USB card reader
[    9.964711] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    9.965084] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    9.965224] usbcore: registered new interface driver rts5139
[    9.968290] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   10.032738] fbcon: inteldrmfb (fb0) is primary device
[   10.113095] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   10.152730] Linux video capture interface: v2.00
[   10.287587] type=1400 audit(1383775962.706:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=686 comm="apparmor_parser"
[   10.287597] type=1400 audit(1383775962.706:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=729 comm="apparmor_parser"
[   10.287962] type=1400 audit(1383775962.706:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser"
[   10.287971] type=1400 audit(1383775962.706:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=686 comm="apparmor_parser"
[   10.288162] type=1400 audit(1383775962.706:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=729 comm="apparmor_parser"
[   10.288172] type=1400 audit(1383775962.706:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=686 comm="apparmor_parser"
[   10.350436] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0292)
[   10.352276] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input9
[   10.352370] usbcore: registered new interface driver uvcvideo
[   10.352370] USB Video Class driver (1.1.1)
[   10.370393] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.767416] Console: switching to colour frame buffer device 170x48
[   10.770031] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.770034] i915 0000:00:02.0: registered panic notifier
[   10.777749] acpi device:34: registered as cooling_device4
[   10.777893] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.778488] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[   10.778859] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.778973] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   10.971551] hda_codec: CX20590: BIOS auto-probing.
[   10.974432] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.974498] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.196618] init: failsafe main process (786) killed by TERM signal
[   11.810524] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   12.657136] ppdev: user-space parallel port driver
[   12.970485] Bluetooth: RFCOMM TTY layer initialized
[   12.970497] Bluetooth: RFCOMM socket layer initialized
[   12.970499] Bluetooth: RFCOMM ver 1.11
[   13.088624] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.088627] Bluetooth: BNEP filters: protocol multicast
[   13.088635] Bluetooth: BNEP socket layer initialized
[   13.676974] type=1400 audit(1383775966.098:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=900 comm="apparmor_parser"
[   13.677391] type=1400 audit(1383775966.098:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=900 comm="apparmor_parser"
[   15.726895] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
[   15.744325] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.751658] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.811094] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   15.811143] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[   15.811751] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.814194] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.589405] type=1400 audit(1383775970.014:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=975 comm="apparmor_parser"
[   17.589781] type=1400 audit(1383775970.014:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=975 comm="apparmor_parser"
[   17.589984] type=1400 audit(1383775970.014:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=975 comm="apparmor_parser"
[   17.621225] type=1400 audit(1383775970.046:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=974 comm="apparmor_parser"
[   17.621520] type=1400 audit(1383775970.046:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=974 comm="apparmor_parser"
[   17.640701] type=1400 audit(1383775970.066:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=978 comm="apparmor_parser"
[   17.641120] type=1400 audit(1383775970.066:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=978 comm="apparmor_parser"
[   17.644495] type=1400 audit(1383775970.070:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=979 comm="apparmor_parser"
[   17.644927] type=1400 audit(1383775970.070:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=979 comm="apparmor_parser"
[   17.657097] type=1400 audit(1383775970.082:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=981 comm="apparmor_parser"
[   19.487554] wlan0: authenticate with 9c:d2:4b:61:b2:a0
[   19.490164] wlan0: send auth to 9c:d2:4b:61:b2:a0 (try 1/3)
[   19.491623] wlan0: authenticated
[   19.493719] wlan0: associate with 9c:d2:4b:61:b2:a0 (try 1/3)
[   19.496342] wlan0: RX AssocResp from 9c:d2:4b:61:b2:a0 (capab=0x411 status=0 aid=2)
[   19.497019] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[   19.497023] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[   19.497025] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   19.497033] wlan0: associated
[   19.497056] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   20.003825] IPv6: wlan0: IPv6 duplicate address fe80::c218:85ff:fe37:b943 detected!
[   20.156565] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[   36.429285] audit_printk_skb: 24 callbacks suppressed
[   36.429294] type=1400 audit(1383775988.871:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=920 comm="cupsd" pid=920 comm="cupsd" capability=36  capname="block_suspend"




edit : Bu arada Gedit'i kapatınca şöyle bir hata veriyor netten bakıyorum şimdi acaba tamamını göstermiyor mu diye

Kod Seç

(gedit:2027): GLib-GObject-CRITICAL **: g_object_add_weak_pointer: assertion `G_IS_OBJECT (object)' failed


edit : gksudo ile açınca bir sıkıntı olmuyor evet aynı görünüyor.

heartsmagic

#19
07 Kasım 2013 - 10:47:03
@bijehr, çıktıları "alıntı" değil de "kod etiketi" içinde aktarırsın: kodetiketi

Uzun derken ne kadar uzun sürüyor? Forumdan ipv6'yı iptal etmeye yönelik yönergeleri bulup uygular, sonra tekrar sistemi açmayı denersin. Ancak ipv6'nın iptal edildiğinden emin ol. Forumda onu denetlemenin yolları da veriliyordur iletiler arasında.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

if

#20
07 Kasım 2013 - 18:07:51
@heartsmagic'in dediği gibi ipv6'yı ipv6.disable=1 çekirdek parametresinden kaldırın. Mavidiş'i kullanmayacaksanız
Kod Seç
sudo rfkill block bluetooth ile kapatın. Hatta sistemden tamamen kaldırabilirsiniz:
Kod Seç
sudo apt-get purge  bluetooth indicator-bluetooth

Yazıcınız yoksa cups'u kaldıralım:
Kod Seç
sudo apt-get purge cups
Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri