Netbook LVDS Çözünürlük Degiştirme

Başlatan nowheretohide, 17 Şubat 2012 - 17:01:30

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

nowheretohide

Merhaba arkadaşlar,

Netbook cihazımda daha yüksek çözünürlük almak istiyorum, 1024x600 çözünürlük ile bazı programlarda sorun yaşamaktayım.
Forumda konu hakkında araştırma yaptığımada karşıma çıkan http://forum.ubuntu-tr.net/index.php/topic,24794.0.html sayfadaki  çözümleri denedim fakat eklemiş olduğum ekran çözünürlüğü sürekli olarak VGA1 bilgisi altında çıkıyordu.

xrandr

Screen 0: minimum 320 x 200, current 1024 x 600, maximum 4096 x 4096
LVDS1 connected 1024x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x600       60.0*+
   800x600        60.3     56.2 
   640x480        59.9 
VGA1 disconnected (normal left inverted right x axis y axis)


xrandr --newmode "1280x800_60.00"   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync
komutundan sonra almış olduğum bilgi ise şöyle:
Screen 0: minimum 320 x 200, current 1024 x 600, maximum 4096 x 4096
LVDS1 connected 1024x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x600       60.0*+
   800x600        60.3     56.2 
   640x480        59.9 
VGA1 disconnected (normal left inverted right x axis y axis)
  1280x800_60.00 (0xc9)   83.5MHz
        h: width  1280 start 1352 end 1480 total 1680 skew    0 clock   49.7KHz
        v: height  800 start  803 end  809 total  831           clock   59.8Hz


xrandr --addmode LVDS1 1280x800_60.00 şeklinde komut verincede aşağıdaki bilgi çıkıyor karşıma:
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  149 (RANDR)
  Minor opcode of failed request:  18 (RRAddOutputMode)
  Serial number of failed request:  25
  Current serial number in output stream:  26


LVDS1 yazmamın nedeni default olarak LVDS1 görünüyor.

Sorun teknik olarak birşey mi yoksa yazılımsal olarak bir sorun mu anlayamadım. Yardımcı olursanız sevinirim.

heartsmagic

LVDS olarak denediğinde ne oluyor? Ayrıca şunu denediğinde nasıl bir tepki alıyorsun?

xrandr --output LVDS --mode 1280x800
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

nowheretohide

LVDS olarak deneyince :
warning: output LVDS not found; ignoring


xrandr --output LVDS1 --mode 1280x800
boyle deneyincede :
xrandr: cannot find mode 1280x800

heartsmagic

LVDS1 altında o çözünürlük görünmüyormuş zaten. Eğer destekliyorsa daha yukarısını nasıl gösterebiliriz şu anda cidden bir fikrim yok ne yazık ki.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

nowheretohide

Win7 de daha yuksek cozunurluk alabiliyorum. Yinede yardiminiz icin tesekkurler.

burk

@nowheretohide sorun için internette biraz araştırma yaptım ancak genel olarak cevapsız kalmış başlıklar mevcut. Ben yine de
glxinfo | grep render
lspci | grep VGA
çıktılarını görebilir miyim?

nowheretohide

glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) 945GME x86/MMX/SSE2


lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)



burk

@nowheretohide ne yazık ki buraya geçecek kesinlikte bir bilgi bulamadım. Birkaç deneysel işlem yapılmış ancak sonrasında başka sorunlarla uğraşmışlar.

if

@nowheretohide, cat /var/log/Xorg.0.log ne diyor?

nowheretohide

[    31.765] X Protocol Version 11, Revision 0
[    31.766] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[    31.766] Current Operating System: Linux ITNetbook 3.0.0-16-generic #28-Ubuntu SMP Fri Jan 27 17:50:54 UTC 2012 i686
[    31.766] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic root=UUID=72dafdba-02c4-43f9-b2ce-a8dc28e11827 ro quiet splash vt.handoff=7
[    31.766] Build Date: 19 October 2011  05:09:41AM
[    31.766] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
[    31.766] Current version of pixman: 0.22.2
[    31.766] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    31.766] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.767] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 20 18:10:50 2012
[    31.936] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    32.281] (==) No Layout section.  Using the first Screen section.
[    32.281] (==) No screen section available. Using defaults.
[    32.281] (**) |-->Screen "Default Screen Section" (0)
[    32.281] (**) |   |-->Monitor "<default monitor>"
[    32.283] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    32.283] (==) Automatically adding devices
[    32.283] (==) Automatically enabling devices
[    32.309] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    32.309] Entry deleted from font path.
[    32.382] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    32.382] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    32.382] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    32.382] (II) Loader magic: 0x823ada0
[    32.382] (II) Module ABI versions:
[    32.382] X.Org ANSI C Emulation: 0.4
[    32.382] X.Org Video Driver: 10.0
[    32.382] X.Org XInput driver : 12.3
[    32.382] X.Org Server Extension : 5.0
[    32.386] (--) PCI:*(0:0:2:0) 8086:27ae:1961:d10c rev 3, Mem @ 0xd2000000/524288, 0xb0000000/268435456, 0xd2100000/262144, I/O @ 0x00001800/8
[    32.387] (--) PCI: (0:0:2:1) 8086:27a6:1961:d10c rev 3, Mem @ 0xd2080000/524288
[    32.387] (II) Open ACPI successful (/var/run/acpid.socket)
[    32.387] (II) LoadModule: "extmod"
[    32.490] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    32.501] (II) Module extmod: vendor="X.Org Foundation"
[    32.501] compiled for 1.10.4, module version = 1.0.0
[    32.502] Module class: X.Org Server Extension
[    32.502] ABI class: X.Org Server Extension, version 5.0
[    32.502] (II) Loading extension MIT-SCREEN-SAVER
[    32.502] (II) Loading extension XFree86-VidModeExtension
[    32.502] (II) Loading extension XFree86-DGA
[    32.502] (II) Loading extension DPMS
[    32.502] (II) Loading extension XVideo
[    32.502] (II) Loading extension XVideo-MotionCompensation
[    32.502] (II) Loading extension X-Resource
[    32.502] (II) LoadModule: "dbe"
[    32.504] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    32.506] (II) Module dbe: vendor="X.Org Foundation"
[    32.506] compiled for 1.10.4, module version = 1.0.0
[    32.506] Module class: X.Org Server Extension
[    32.506] ABI class: X.Org Server Extension, version 5.0
[    32.506] (II) Loading extension DOUBLE-BUFFER
[    32.506] (II) LoadModule: "glx"
[    32.508] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    32.514] (II) Module glx: vendor="X.Org Foundation"
[    32.514] compiled for 1.10.4, module version = 1.0.0
[    32.514] ABI class: X.Org Server Extension, version 5.0
[    32.515] (==) AIGLX enabled
[    32.515] (II) Loading extension GLX
[    32.515] (II) LoadModule: "record"
[    32.517] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    32.524] (II) Module record: vendor="X.Org Foundation"
[    32.524] compiled for 1.10.4, module version = 1.13.0
[    32.524] Module class: X.Org Server Extension
[    32.524] ABI class: X.Org Server Extension, version 5.0
[    32.524] (II) Loading extension RECORD
[    32.524] (II) LoadModule: "dri"
[    32.527] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    32.529] (II) Module dri: vendor="X.Org Foundation"
[    32.529] compiled for 1.10.4, module version = 1.0.0
[    32.529] ABI class: X.Org Server Extension, version 5.0
[    32.529] (II) Loading extension XFree86-DRI
[    32.529] (II) LoadModule: "dri2"
[    32.531] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    32.533] (II) Module dri2: vendor="X.Org Foundation"
[    32.533] compiled for 1.10.4, module version = 1.2.0
[    32.533] ABI class: X.Org Server Extension, version 5.0
[    32.533] (II) Loading extension DRI2
[    32.533] (==) Matched intel as autoconfigured driver 0
[    32.533] (==) Matched vesa as autoconfigured driver 1
[    32.533] (==) Matched fbdev as autoconfigured driver 2
[    32.533] (==) Assigned the driver to the xf86ConfigLayout
[    32.533] (II) LoadModule: "intel"
[    32.535] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    32.730] (II) Module intel: vendor="X.Org Foundation"
[    32.731] compiled for 1.10.4, module version = 2.15.901
[    32.731] Module class: X.Org Video Driver
[    32.731] ABI class: X.Org Video Driver, version 10.0
[    32.731] (II) LoadModule: "vesa"
[    32.733] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    32.739] (II) Module vesa: vendor="X.Org Foundation"
[    32.739] compiled for 1.10.2, module version = 2.3.0
[    32.740] Module class: X.Org Video Driver
[    32.740] ABI class: X.Org Video Driver, version 10.0
[    32.740] (II) LoadModule: "fbdev"
[    32.742] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    32.748] (II) Module fbdev: vendor="X.Org Foundation"
[    32.748] compiled for 1.10.0, module version = 0.4.2
[    32.748] ABI class: X.Org Video Driver, version 10.0
[    32.748] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    32.751] (II) VESA: driver for VESA chipsets: vesa
[    32.751] (II) FBDEV: driver for framebuffer: fbdev
[    32.751] (++) using VT number 7

[    32.759] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    32.760] (WW) Falling back to old probe method for vesa
[    32.760] (WW) Falling back to old probe method for fbdev
[    32.760] (II) Loading sub module "fbdevhw"
[    32.760] (II) LoadModule: "fbdevhw"
[    32.761] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    32.823] (II) Module fbdevhw: vendor="X.Org Foundation"
[    32.823] compiled for 1.10.4, module version = 0.0.2
[    32.823] ABI class: X.Org Video Driver, version 10.0
[    32.824] drmOpenDevice: node name is /dev/dri/card0
[    32.824] drmOpenDevice: open result is 12, (OK)
[    32.824] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    32.824] drmOpenDevice: node name is /dev/dri/card0
[    32.824] drmOpenDevice: open result is 12, (OK)
[    32.824] drmOpenByBusid: drmOpenMinor returns 12
[    32.824] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    32.824] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    32.825] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    32.825] (==) intel(0): RGB weight 888
[    32.825] (==) intel(0): Default visual is TrueColor
[    32.825] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[    32.825] (--) intel(0): Chipset: "945GME"
[    32.825] (**) intel(0): Relaxed fencing disabled
[    32.825] (**) intel(0): Wait on SwapBuffers? enabled
[    32.825] (**) intel(0): Triple buffering? enabled
[    32.826] (**) intel(0): Framebuffer tiled
[    32.826] (**) intel(0): Pixmaps tiled
[    32.826] (**) intel(0): 3D buffers tiled
[    32.826] (**) intel(0): SwapBuffers wait enabled
[    32.826] (==) intel(0): video overlay key set to 0x101fe
[    32.826] (II) intel(0): Output LVDS1 has no monitor section
[    32.828] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    32.860] (II) intel(0): Output VGA1 has no monitor section
[    32.861] (II) intel(0): EDID for output LVDS1
[    32.862] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    32.862] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    32.863] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    32.863] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    32.863] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    32.863] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    32.863] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    32.863] (II) intel(0): Printing probed modes for output LVDS1
[    32.864] (II) intel(0): Modeline "1024x600"x60.0   54.00  1024 1048 1184 1344  600 603 609 670 -hsync -vsync (40.2 kHz)
[    32.864] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    32.864] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    32.864] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    32.896] (II) intel(0): EDID for output VGA1
[    32.896] (II) intel(0): Output LVDS1 connected
[    32.896] (II) intel(0): Output VGA1 disconnected
[    32.896] (II) intel(0): Using exact sizes for initial modes
[    32.896] (II) intel(0): Output LVDS1 using initial mode 1024x600
[    32.897] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    32.897] (II) intel(0): Kernel page flipping support detected, enabling
[    32.897] (==) intel(0): DPI set to (96, 96)
[    32.897] (II) Loading sub module "fb"
[    32.897] (II) LoadModule: "fb"
[    32.898] (II) Loading /usr/lib/xorg/modules/libfb.so
[    32.941] (II) Module fb: vendor="X.Org Foundation"
[    32.941] compiled for 1.10.4, module version = 1.0.0
[    32.942] ABI class: X.Org ANSI C Emulation, version 0.4
[    32.942] (II) Loading sub module "dri2"
[    32.942] (II) LoadModule: "dri2"
[    32.945] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    32.945] (II) Module dri2: vendor="X.Org Foundation"
[    32.945] compiled for 1.10.4, module version = 1.2.0
[    32.946] ABI class: X.Org Server Extension, version 5.0
[    32.946] (II) UnloadModule: "vesa"
[    32.946] (II) Unloading vesa
[    32.946] (II) UnloadModule: "fbdev"
[    32.946] (II) Unloading fbdev
[    32.946] (II) UnloadModule: "fbdevhw"
[    32.946] (II) Unloading fbdevhw
[    32.946] (==) Depth 24 pixmap format is 32 bpp
[    32.947] (II) intel(0): [DRI2] Setup complete
[    32.947] (II) intel(0): [DRI2]   DRI driver: i915
[    32.947] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[    32.960] (II) UXA(0): Driver registered support for the following operations:
[    32.960] (II)         solid
[    32.960] (II)         copy
[    32.960] (II)         composite (RENDER acceleration)
[    32.960] (II)         put_image
[    32.961] (II)         get_image
[    32.961] (==) intel(0): Backing store disabled
[    32.961] (==) intel(0): Silken mouse enabled
[    32.962] (II) intel(0): Initializing HW Cursor
[    33.000] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    33.008] (==) intel(0): DPMS enabled
[    33.008] (==) intel(0): Intel XvMC decoder disabled
[    33.008] (II) intel(0): Set up textured video
[    33.008] (II) intel(0): Set up overlay video
[    33.008] (II) intel(0): direct rendering: DRI2 Enabled
[    33.009] (==) intel(0): hotplug detection: "enabled"
[    33.009] (--) RandR disabled
[    33.009] (II) Initializing built-in extension Generic Event Extension
[    33.009] (II) Initializing built-in extension SHAPE
[    33.010] (II) Initializing built-in extension MIT-SHM
[    33.010] (II) Initializing built-in extension XInputExtension
[    33.010] (II) Initializing built-in extension XTEST
[    33.010] (II) Initializing built-in extension BIG-REQUESTS
[    33.010] (II) Initializing built-in extension SYNC
[    33.010] (II) Initializing built-in extension XKEYBOARD
[    33.010] (II) Initializing built-in extension XC-MISC
[    33.010] (II) Initializing built-in extension SECURITY
[    33.010] (II) Initializing built-in extension XINERAMA
[    33.010] (II) Initializing built-in extension XFIXES
[    33.010] (II) Initializing built-in extension RENDER
[    33.011] (II) Initializing built-in extension RANDR
[    33.011] (II) Initializing built-in extension COMPOSITE
[    33.011] (II) Initializing built-in extension DAMAGE
[    33.011] (II) Initializing built-in extension GESTURE
[    33.121] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/i915_dri.so
[    33.442] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    33.442] (II) AIGLX: enabled GLX_INTEL_swap_event
[    33.442] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    33.442] (II) AIGLX: enabled GLX_SGI_make_current_read
[    33.442] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    33.443] (II) AIGLX: Loaded and initialized i915
[    33.443] (II) GLX: Initialized DRI2 GL provider for screen 0
[    33.446] (II) intel(0): Setting screen physical size to 270 x 158
[    34.167] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    34.398] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    34.398] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.399] (II) LoadModule: "evdev"
[    34.438] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.582] (II) Module evdev: vendor="X.Org Foundation"
[    34.582] compiled for 1.10.2, module version = 2.6.0
[    34.582] Module class: X.Org XInput Driver
[    34.582] ABI class: X.Org XInput driver, version 12.3
[    34.582] (II) Using input driver 'evdev' for 'Power Button'
[    34.582] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.582] (**) Power Button: always reports core events
[    34.582] (**) Power Button: Device: "/dev/input/event3"
[    34.583] (--) Power Button: Found keys
[    34.583] (II) Power Button: Configuring as keyboard
[    34.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    34.583] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    34.583] (**) Option "xkb_rules" "evdev"
[    34.583] (**) Option "xkb_model" "pc105"
[    34.584] (**) Option "xkb_layout" "us"
[    34.589] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    34.589] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    34.589] (II) Using input driver 'evdev' for 'Video Bus'
[    34.589] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.590] (**) Video Bus: always reports core events
[    34.590] (**) Video Bus: Device: "/dev/input/event7"
[    34.590] (--) Video Bus: Found keys
[    34.590] (II) Video Bus: Configuring as keyboard
[    34.590] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7/event7"
[    34.590] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    34.590] (**) Option "xkb_rules" "evdev"
[    34.590] (**) Option "xkb_model" "pc105"
[    34.591] (**) Option "xkb_layout" "us"
[    34.674] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    34.674] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.674] (II) Using input driver 'evdev' for 'Power Button'
[    34.674] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.675] (**) Power Button: always reports core events
[    34.675] (**) Power Button: Device: "/dev/input/event1"
[    34.675] (--) Power Button: Found keys
[    34.675] (II) Power Button: Configuring as keyboard
[    34.675] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    34.675] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    34.675] (**) Option "xkb_rules" "evdev"
[    34.676] (**) Option "xkb_model" "pc105"
[    34.676] (**) Option "xkb_layout" "us"
[    34.679] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    34.679] (II) No input driver/identifier specified (ignoring)
[    34.683] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    34.683] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    34.683] (II) Using input driver 'evdev' for 'Sleep Button'
[    34.683] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.683] (**) Sleep Button: always reports core events
[    34.684] (**) Sleep Button: Device: "/dev/input/event2"
[    34.684] (--) Sleep Button: Found keys
[    34.684] (II) Sleep Button: Configuring as keyboard
[    34.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    34.684] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    34.685] (**) Option "xkb_rules" "evdev"
[    34.685] (**) Option "xkb_model" "pc105"
[    34.685] (**) Option "xkb_layout" "us"
[    34.698] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    34.698] (II) No input driver/identifier specified (ignoring)
[    34.700] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    34.701] (II) No input driver/identifier specified (ignoring)
[    34.721] (II) config/udev: Adding input device HID TOUCH HID Touch Panel (/dev/input/event5)
[    34.721] (**) HID TOUCH HID Touch Panel: Applying InputClass "evdev tablet catchall"
[    34.721] (II) Using input driver 'evdev' for 'HID TOUCH HID Touch Panel'
[    34.721] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.721] (**) HID TOUCH HID Touch Panel: always reports core events
[    34.721] (**) HID TOUCH HID Touch Panel: Device: "/dev/input/event5"
[    34.722] (--) HID TOUCH HID Touch Panel: Found absolute axes
[    34.723] (II) evdev-grail: failed to open grail, no gesture support
[    34.723] (--) HID TOUCH HID Touch Panel: Found x and y absolute axes
[    34.723] (--) HID TOUCH HID Touch Panel: Found absolute tablet.
[    34.723] (II) HID TOUCH HID Touch Panel: Configuring as tablet
[    34.723] (**) HID TOUCH HID Touch Panel: YAxisMapping: buttons 4 and 5
[    34.723] (**) HID TOUCH HID Touch Panel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.724] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.2/1-7.2:1.0/input/input5/event5"
[    34.724] (II) XINPUT: Adding extended input device "HID TOUCH HID Touch Panel" (type: TABLET)
[    34.724] (II) HID TOUCH HID Touch Panel: initialized for absolute axes.
[    34.724] (**) HID TOUCH HID Touch Panel: (accel) keeping acceleration scheme 1
[    34.724] (**) HID TOUCH HID Touch Panel: (accel) acceleration profile 0
[    34.725] (**) HID TOUCH HID Touch Panel: (accel) acceleration factor: 2.000
[    34.725] (**) HID TOUCH HID Touch Panel: (accel) acceleration threshold: 4
[    34.727] (II) config/udev: Adding input device HID TOUCH HID Touch Panel (/dev/input/mouse0)
[    34.727] (II) No input driver/identifier specified (ignoring)
[    34.729] (II) config/udev: Adding input device HID TOUCH HID Touch Panel (/dev/input/event6)
[    34.729] (**) HID TOUCH HID Touch Panel: Applying InputClass "evdev pointer catchall"
[    34.729] (II) Using input driver 'evdev' for 'HID TOUCH HID Touch Panel'
[    34.729] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.730] (**) HID TOUCH HID Touch Panel: always reports core events
[    34.730] (**) HID TOUCH HID Touch Panel: Device: "/dev/input/event6"
[    34.730] (--) HID TOUCH HID Touch Panel: Found 3 mouse buttons
[    34.730] (--) HID TOUCH HID Touch Panel: Found absolute axes
[    34.730] (II) evdev-grail: failed to open grail, no gesture support
[    34.730] (--) HID TOUCH HID Touch Panel: Found x and y absolute axes
[    34.731] (II) HID TOUCH HID Touch Panel: Configuring as mouse
[    34.731] (**) HID TOUCH HID Touch Panel: YAxisMapping: buttons 4 and 5
[    34.731] (**) HID TOUCH HID Touch Panel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.731] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.2/1-7.2:1.0/input/input6/event6"
[    34.731] (II) XINPUT: Adding extended input device "HID TOUCH HID Touch Panel" (type: MOUSE)
[    34.731] (II) HID TOUCH HID Touch Panel: initialized for absolute axes.
[    34.731] (**) HID TOUCH HID Touch Panel: (accel) keeping acceleration scheme 1
[    34.732] (**) HID TOUCH HID Touch Panel: (accel) acceleration profile 0
[    34.732] (**) HID TOUCH HID Touch Panel: (accel) acceleration factor: 2.000
[    34.732] (**) HID TOUCH HID Touch Panel: (accel) acceleration threshold: 4
[    34.735] (II) config/udev: Adding input device HID TOUCH HID Touch Panel (/dev/input/js0)
[    34.735] (II) No input driver/identifier specified (ignoring)
[    34.741] (II) config/udev: Adding input device HID TOUCH HID Touch Panel (/dev/input/mouse1)
[    34.741] (II) No input driver/identifier specified (ignoring)
[    34.745] (II) config/udev: Adding input device Sirius USB2.0 Camera (/dev/input/event9)
[    34.745] (**) Sirius USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    34.745] (II) Using input driver 'evdev' for 'Sirius USB2.0 Camera'
[    34.746] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.746] (**) Sirius USB2.0 Camera: always reports core events
[    34.746] (**) Sirius USB2.0 Camera: Device: "/dev/input/event9"
[    34.746] (--) Sirius USB2.0 Camera: Found keys
[    34.746] (II) Sirius USB2.0 Camera: Configuring as keyboard
[    34.746] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.4/1-7.4:1.0/input/input9/event9"
[    34.746] (II) XINPUT: Adding extended input device "Sirius USB2.0 Camera" (type: KEYBOARD)
[    34.746] (**) Option "xkb_rules" "evdev"
[    34.747] (**) Option "xkb_model" "pc105"
[    34.747] (**) Option "xkb_layout" "us"
[    34.768] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    34.768] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    34.768] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    34.768] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    34.768] (**) AT Translated Set 2 keyboard: always reports core events
[    34.768] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    34.769] (--) AT Translated Set 2 keyboard: Found keys
[    34.769] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    34.769] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    34.769] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    34.769] (**) Option "xkb_rules" "evdev"
[    34.769] (**) Option "xkb_model" "pc105"
[    34.769] (**) Option "xkb_layout" "us"
[    34.773] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    34.773] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    34.773] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    34.773] (II) LoadModule: "synaptics"
[    34.776] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    34.908] (II) Module synaptics: vendor="X.Org Foundation"
[    34.908] compiled for 1.10.4, module version = 1.4.1
[    34.908] Module class: X.Org XInput Driver
[    34.908] ABI class: X.Org XInput driver, version 12.3
[    34.909] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    34.909] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    34.909] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    34.909] (**) Option "Device" "/dev/input/event8"
[    34.956] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    34.956] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4838
[    34.956] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    34.956] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    34.956] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    34.988] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    34.988] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    35.020] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input8/event8"
[    35.020] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    35.020] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    35.021] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    35.021] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    35.022] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    35.022] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    35.022] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    35.023] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    35.029] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    35.031] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[    35.032] (II) No input driver/identifier specified (ignoring)
[    76.034] (II) XKB: reuse xkmfile /var/lib/xkb/server-A17E42D60A3DB50E20981859E48E7F10F4B633F6.xkm

lordofthelbs


furkankalkan

Kullandığınız sistemin sürümü nedir ? 10.04 sürümünde ben de aynı sorunu yaşıyordum. Daha üst kernel sürümlerinde sorunsuz.
Lover
twitter.com/furkan_kalkan1

lordofthelbs

lubuntunun son sürümünü kullanıyorum,ama çözünürlük yetersiz.

furkankalkan

Normal Ubuntu ne alemde ? Intel kartlar böyle yapmazlar güncel sistemlerde ama bilemiyorum :(
Lover
twitter.com/furkan_kalkan1

burk

Alıntı yapılan: lordofthelbs - 23 Eylül 2013 - 22:26:08
lubuntunun son sürümünü kullanıyorum,ama çözünürlük yetersiz.

glxinfo | grep render çıktısını görelim.