Bilgisayarımdan bip sesi gelmiyor. Sensors yazılımı alarm verdi!

[orpi]

Bilgisayardan bip sesi gelmeyince açılmıyor. gelene kadar kapat aç yapıyorum. Açıldıktan sonra hiçbir sorun yok her işlemi yapabiliyorum. Bilgisayardan Yeniden başlat komutu verdiğimde yeniden başlatıyor ama kasanın düğmesinden kapattığımda açmak için denemek gerekiyor. Çok çözüm aradım İnternette. En ufak kablosuna kadar söktüm taktım, Ama hiç* bir şey değişmedi.

En sonunda Sensor adlı programı kurdum sıcaklıktan  süphelendim. Sensor komutunu verdiğimde aşağıdaki çıktıyı alıyorum.

Kod Seç Genişlet

acpitz-virtual-0
Adapter: Virtual device
temp1:        +40.0°C  (crit = +75.0°C)

atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.17 V  (min =  +1.45 V, max =  +1.75 V)
+3.3 Voltage:      +3.27 V  (min =  +3.00 V, max =  +3.60 V)
+5.0 Voltage:      +5.03 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.22 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     2311 RPM  (min =    0 RPM)
CHASSIS FAN Speed: 1704 RPM  (min =    0 RPM)
CPU Temperature:    +19.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +22.0°C  (high = +70.0°C, crit = +125.0°C)

lm63-i2c-1-4c
Adapter: Radeon i2c bit bus 0x90
temp1:         -6.0°C  (high =  -6.0°C)                  ALARM (HIGH)
temp2:         +0.0°C  (low  =  +0.0°C, high =  +0.0°C)  ALARM (LOW, HIGH, CRIT)
                       (crit =  -6.0°C, hyst = -256.0°C)


Ekran kartıyla alakalı bir sıcaklık problemi olduğunu düşünüyorum. Siz ne düşünüyorsunuz. Ben bu problemi nasıl çözebilirim? Şimdiden teşekkürler.

[bytan]

Anakartın üzerinde ikinci bir ekran kartın var mı? Ya da ekran kartını söktüğünde sıkıntılı kısmı geçebiliyor musun?

[cagriemer]

Bir de asagidaki komutlarin ciktilarini gecer misiniz?

Kod Seç Genişlet

lspci
lsusb

[orpi]

Anakartın üzerinde ikinci bir ekran kartı yok. Yani Ekran kartını sökersem bilgisayar açılır mı?

lspci

Kod Seç Genişlet


00:00.0 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. CN896/VN896/P4M900 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. CN896/VN896/P4M900 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. CN896/VN896/P4M900 PCI to PCI Bridge Controller (rev 80)
00:03.0 PCI bridge: VIA Technologies, Inc. CN896/VN896/P4M900 PCI to PCI Bridge Controller (rev 80)
00:0f.0 IDE interface: VIA Technologies, Inc. Device 5337 (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller
00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
02:00.0 VGA compatible controller: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series]
02:00.1 Display controller: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] (Secondary)
03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03)
04:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
80:01.0 Audio device: VIA Technologies, Inc. VT8237A/VT8251 HDA Controller (rev 10)



lsusb

Kod Seç Genişlet


Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 003 Device 003: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard


[if]

@orpi,

Kod Seç Genişlet

sudo apt-get install mesa-utils
glxinfo | grep render çıktısını alabilir miyim?

[orpi]

glxinfo | grep render çıktısı

Kod Seç Genişlet

direct rendering: Yes
OpenGL renderer string: Gallium 0.4 on ATI RV515
    GL_NV_conditional_render, GL_ARB_draw_elements_base_vertex,

Bu sabahta uzun uğraşlar sonucu açabildim bilgisayarı.

[if]

@orpi, ilk verdiğiniz çıktıyı lm-sensors ile mi aldınız?

Kod Seç Genişlet

sudo su
echo profile > /sys/class/drm/card0/device/power_method
echo low > /sys/class/drm/card0/device/power_profile komutlarından sonra bir iyileşme oluyor mu?

[orpi]

@if konutların çıktısını alamıyorum böyle bir dosya yada dizin yok diyor. Şuan bilgisayardan sorunsuzca yazıyorum fakat bilgisayarı kapattığımda bir daha açmak için bip sesini duyana kadar aç kapa yapıyorum.

[zeitgeist]

Bahseetiğin o bip sesi bellek okuma sürecidir yanlış bilmiyorsam. Belleklerin yerlerini değiştirmeni ya da her açılışta teker teker takarak denemeni tavsiye ederim. En azından bu ihtimali de elemiş olursun.

[orpi]

@zeitgeist bellek derken Ramdan bahsediyorsan bir tane 2GiB var faklı slotlarda denedim bir fark göremedim.

[if]

@orpi,

Kod Seç Genişlet

dmesg | grep ACPI
dmesg | grep drm çıktılarına bakalım.

[orpi]

 dmesg | grep ACPI

Kod Seç Genişlet

[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[    0.000000] DMI: System manufacturer System Product Name/P5VD2-VM, BIOS ASUS P5VD2-VM ACPI BIOS Revision 1105 05/22/2007
[    0.000000] ACPI: RSDP 000f7480 00024 (v02 AWARD )
[    0.000000] ACPI: XSDT 7fee30c0 00054 (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 7feeab80 000F4 (v03 Datate Diamond1 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 7fee3240 078CD (v01 Datate Diamond1 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 7fee0000 00040
[    0.000000] ACPI: SLIC 7feeadc0 00176 (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.000000] ACPI: HPET 7feeaf80 00038 (v01 Datate Diamond1 42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 7feeb000 0003C (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 7feeacc0 00090 (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.000000] ACPI: SSDT 7feeb560 00304 (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x11068201 base: 0xfe800000
[    0.009632] ACPI: Core revision 20110413
[    0.153242] PM: Registering ACPI NVS region at 7fee0000 (12288 bytes)
[    0.156055] ACPI: bus type pci registered
[    0.159463] ACPI: EC: Look up EC in DSDT
[    0.168470] ACPI: SSDT 7feeb080 001B7 (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.168975] ACPI: Dynamic OEM Table Load:
[    0.168979] ACPI: SSDT   (null) 001B7 (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.169120] ACPI: SSDT 7feeb490 000CE (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.169612] ACPI: Dynamic OEM Table Load:
[    0.169615] ACPI: SSDT   (null) 000CE (v01 Datate Diamond1 42302E31 AWRD 00000000)
[    0.169986] ACPI: Interpreter enabled
[    0.169995] ACPI: (supports S0 S1 S3 S4 S5)
[    0.170024] ACPI: Using IOAPIC for interrupt routing
[    0.177031] ACPI: No dock devices found.
[    0.177039] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.177305] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
[    0.180999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.181300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[    0.181395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.181486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[    0.181754]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.182002]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.218983] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
[    0.219340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[    0.219552]  pci0000:80: Requesting ACPI _OSC control (0x1d)
[    0.219770]  pci0000:80: ACPI _OSC control (0x1d) granted
[    0.220030] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.220130] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[    0.220232] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
[    0.220334] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[    0.220423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12)
[    0.220496] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.220571] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.220657] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[    0.221386] PCI: Using ACPI for IRQ routing
[    0.245375] pnp: PnP ACPI init
[    0.245398] ACPI: bus type pnp registered
[    0.245724] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.245836] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246643] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246716] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.246845] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.246926] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.246991] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.247061] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.247306] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.247606] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.248189] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.248362] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248476] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248621] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.248979] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.248991] pnp: PnP ACPI: found 15 devices
[    0.248993] ACPI: ACPI bus type pnp unregistered
[    0.248998] PnPBIOS: Disabled by ACPI PNP
[    0.327204] ACPI: Power Button [PWRB]
[    0.327258] ACPI: Sleep Button [SLPB]
[    0.327323] ACPI: Power Button [PWRF]
[    0.327378] ACPI: Fan [FAN] (on)
[    0.327387] ACPI: acpi_idle registered with cpuidle
[    0.330848] ACPI: Thermal Zone [THRM] (40 C)
[    5.334976] parport_pc 00:0a: reported by Plug and Play ACPI

dmesg | grep drm

Kod Seç Genişlet

[    5.344636] [drm] Initialized drm 1.1.0 20060810
[    5.780357] [drm] radeon defaulting to kernel modesetting.
[    5.780361] [drm] radeon kernel modesetting enabled.
[    5.780798] [drm] initializing kernel modesetting (RV515 0x1002:0x7142 0x1787:0x3000).
[    5.780829] [drm] register mmio base: 0xDFDF0000
[    5.780831] [drm] register mmio size: 65536
[    5.781017] [drm] Generation 2 PCI interface, using max accessible memory
[    5.781049] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.781051] [drm] Driver supports precise vblank timestamp query.
[    5.781086] [drm] radeon: irq initialized.
[    5.781692] [drm] Detected VRAM RAM=512M, BAR=256M
[    5.781696] [drm] RAM width 128bits DDR
[    5.781820] [drm] radeon: 512M of VRAM memory ready
[    5.781822] [drm] radeon: 512M of GTT memory ready.
[    5.781846] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.783312] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    5.784438] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[    5.784767] [drm] Loading R500 Microcode
[    6.150063] [drm] radeon: ring at 0x0000000020001000
[    6.150095] [drm] ring test succeeded in 7 usecs
[    6.150408] [drm] radeon: ib pool ready.
[    6.150504] [drm] ib test succeeded in 0 usecs
[    6.150828] [drm] Radeon Display Connectors
[    6.150831] [drm] Connector 0:
[    6.150832] [drm]   DVI-I
[    6.150834] [drm]   HPD1
[    6.150837] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    6.150839] [drm]   Encoders:
[    6.150840] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.150842] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[    6.150844] [drm] Connector 1:
[    6.150846] [drm]   S-video
[    6.150847] [drm]   Encoders:
[    6.150849] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    6.150851] [drm] Connector 2:
[    6.150852] [drm]   DVI-I
[    6.150854] [drm]   HPD2
[    6.150856] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    6.150858] [drm]   Encoders:
[    6.150860] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    6.150862] [drm]     DFP3: INTERNAL_LVTM1
[    6.204026] [drm] Radeon display connector DVI-I-1: Found valid EDID
[    6.213808] [drm] Radeon display connector DVI-I-2: No monitor connected or invalid EDID
[    6.213817] [drm] Possible lm63 thermal controller at 0x4c
[    6.372901] [drm] fb mappable at 0xC00C0000
[    6.372904] [drm] vram apper at 0xC0000000
[    6.372906] [drm] size 5300224
[    6.372908] [drm] fb depth is 24
[    6.372910] [drm]    pitch is 5888
[    6.373003] fbcon: radeondrmfb (fb0) is primary device
[    6.373182] fb0: radeondrmfb frame buffer device
[    6.373184] drm: registered panic notifier
[    6.373193] [drm] Initialized radeon 2.10.0 20080528 for 0000:02:00.0 on minor 0
[ 3260.497282] [drm:subconnector_show] *ERROR* Unable to find subconnector property
[ 3260.497539] [drm:select_subconnector_show] *ERROR* Unable to find select subconnector property

[if]

@orpi, tek hata

Kod Seç Genişlet

[drm:subconnector_show] *ERROR* Unable to find subconnector property ama o da böyle bir şeye yol açar mı bilmem. @zeitgeist'in işaret ettiği gibi donanımdan kaynaklanması daha mantıklı. İşletim sistemi başlamadan önce bilgisayar böyle bir şey yapıyor çünkü. BIOS ayarları öntanımlı hale getirilebilir.

[orpi]

@if biosu 2 ay önce öntanımlı hale getirdim. Ama bu sorun Ağustos ayından beri var. En iyisi bir yetkili servise götürmek. Yanlış birşey yapıp sistemi uçurmayalım boşuna... yardımlarınız için teşekkürler.

[if]

Rica ederim @orpi.