i7-2640M noapic nolapic'le Tek İşlemci Olarak Çalışıyor

[mdegis]

Merhabalar,
Yeni almış olduğum notebook'uma Ubuntu yüklemeye çalışmıştım ancak bütün versiyonlarında  gs_change+0x12 şeklinde hata veriyordu ve ekran donuyordu. Debian yüklemeye çalıştığımda da aynı hatayı alıyordum. Bunun üstesinden gelmek için yaptığım araştırmalarda noapic ve nolapic parametrelerini kernel'a verdiğimde çalışan ve driver sorunu olmayan bir sistemim oldu, ancak HT ile 4 çekirdek olan işlemcimin sadece 1 tanesini kullanabiliyorum. Baska forumlarda yaptığım araştırmalarda acpi=ht'nin işe yarabilceği yazıyordu ama benim durumuma yardımcı olamadı.

cpuinfo çıktısı:

Kod Seç Genişlet

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz
stepping : 7
cpu MHz : 800.000
cache size : 4096 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid
bogomips : 5586.84
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:


lshw -class cpu cıktısı

Kod Seç Genişlet

*-cpu                   
       description: CPU
       product: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz
       vendor: Intel Corp.
       physical id: 29
       bus info: cpu@0
       version: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz
       slot: CPU1
       size: 2801MHz
       capacity: 4GHz
       width: 64 bits
       clock: 1333MHz
       capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt aes xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq
       configuration: cores=2 enabledcores=2 threads=4


[if]

@mdegls, BIOS'ta ACPI ile ilgili bir ayar var mı? Varsa değiştirip dener misin? Bir de

Kod Seç Genişlet

dmesg çıktısını alalım.

[mdegis]

@mdegls, BIOS'ta ACPI ile ilgili bir ayar var mı? Varsa değiştirip dener misin? Bir de

Kod Seç Genişlet

dmesg çıktısını alalım.

BIOS'umda ne yazikki ACPI ile ilgili bir ayar yok.

dmesg cıkısı:

Kod Seç Genişlet

    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=43a9bd78-ef26-4df4-b3cf-a4f5e9cc9ce6 ro quiet splash noapic nolapic vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000099800 (usable)
[    0.000000]  BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bce3f000 (usable)
[    0.000000]  BIOS-e820: 00000000bce3f000 - 00000000bcebf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bcebf000 - 00000000bcfbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bcfbf000 - 00000000bcfff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bcfff000 - 00000000bd000000 (usable)
[    0.000000]  BIOS-e820: 00000000bd000000 - 00000000bfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.7 present.
[    0.000000] DMI: Quanta SWH/SWH, BIOS QU131 07/18/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BD000000 mask FFF000000 uncachable
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xbd000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bd000000
[    0.000000]  0000000000 - 00bd000000 page 2M
[    0.000000] kernel direct mapping tables up to bd000000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000023fe00000
[    0.000000]  0100000000 - 023fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 23fe00000 @ bce35000-bce3f000
[    0.000000] RAMDISK: 365b0000 - 372d0000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 CASPER)
[    0.000000] ACPI: XSDT 00000000bcffe120 00094 (v01 CASPER      ERA 00000001      01000013)
[    0.000000] ACPI: FACP 00000000bcffc000 000F4 (v04 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 00000000bcfea000 0E9B7 (v01 CASPER      ERA 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 00000000bcf6e000 00040
[    0.000000] ACPI: ASF! 00000000bcffd000 000A5 (v32 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 00000000bcffb000 00038 (v01 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 00000000bcffa000 0008C (v02 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 00000000bcff9000 0003C (v01 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 00000000bcfe9000 00176 (v01 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 00000000bcfe8000 00224 (v01 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bcfe7000 001DE (v01 CASPER      ERA 00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 00000000bcfe5000 00028 (v01 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 00000000bcfe2000 00034 (v07 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bcfe1000 00846 (v01 CASPER      ERA 00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bcfe0000 00996 (v01 CASPER      ERA 00003000 ACPI 00040000)
[    0.000000] ACPI: DMAR 00000000bcfdf000 000E8 (v01 CASPER      ERA 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bcfda000 04BE3 (v01 CASPER      ERA 00001000 ACPI 00040000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000023fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000023fe00000
[    0.000000]   NODE_DATA [000000023fdfb000 - 000000023fdfffff]
[    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237400000-ffff88023e3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0023fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x00000099
[    0.000000]     0: 0x00000100 -> 0x000bce3f
[    0.000000]     0: 0x000bcfff -> 0x000bd000
[    0.000000]     0: 0x00100000 -> 0x0023fe00
[    0.000000] On node 0 totalpages: 2083785
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3916 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 755320 pages, LIFO batch:31
[    0.000000]   Normal zone: 17913 pages used for memmap
[    0.000000]   Normal zone: 1292295 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000] MPTABLE: OEM ID: Insyde 
[    0.000000] MPTABLE: Product ID: Calpella   
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #2
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 0000000000099000 - 000000000009a000
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bce3f000 - 00000000bcebf000
[    0.000000] PM: Registered nosave memory: 00000000bcebf000 - 00000000bcfbf000
[    0.000000] PM: Registered nosave memory: 00000000bcfbf000 - 00000000bcfff000
[    0.000000] PM: Registered nosave memory: 00000000bd000000 - 00000000bfa00000
[    0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:30600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s79616 r8192 d22784 u1048576
[    0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2051531
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=43a9bd78-ef26-4df4-b3cf-a4f5e9cc9ce6 ro quiet splash noapic nolapic vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] Memory: 8127156k/9435136k available (6109k kernel code, 1099996k absent, 207984k reserved, 4876k data, 984k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2793.612 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.22 BogoMIPS (lpj=11174448)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000022] Security Framework initialized
[    0.000032] AppArmor: AppArmor initialized
[    0.000033] Yama: becoming mindful.
[    0.000671] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002176] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002783] Mount-cache hash table entries: 256
[    0.002861] Initializing cgroup subsys cpuacct
[    0.002865] Initializing cgroup subsys memory
[    0.002870] Initializing cgroup subsys devices
[    0.002871] Initializing cgroup subsys freezer
[    0.002873] Initializing cgroup subsys net_cls
[    0.002874] Initializing cgroup subsys blkio
[    0.002878] Initializing cgroup subsys perf_event
[    0.002898] CPU: Physical Processor ID: 0
[    0.002900] CPU: Processor Core ID: 0
[    0.002904] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002905] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002907] mce: CPU supports 7 MCE banks
[    0.002916] using mwait in idle threads.
[    0.004947] ACPI: Core revision 20110413
[    0.010776] ACPI: setting ELCR to 0200 (from 0c00)
[    0.021589] ftrace: allocating 25647 entries in 101 pages
[    0.029674] SMP disabled
[    0.029677] Performance Events: PEBS fmt1+, SandyBridge events,
[    0.029680] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.029681] no hardware sampling interrupt available.
[    0.029683] Intel PMU driver.
[    0.029685] ... version:                3
[    0.029686] ... bit width:              48
[    0.029687] ... generic registers:      4
[    0.029688] ... value mask:             0000ffffffffffff
[    0.029689] ... max period:             000000007fffffff
[    0.029690] ... fixed-purpose events:   3
[    0.029691] ... event mask:             000000070000000f
[    0.029962] Brought up 1 CPUs
[    0.029964] Total of 1 processors activated (5587.22 BogoMIPS).
[    0.030023] devtmpfs: initialized
[    0.030111] PM: Registering ACPI NVS region at bcebf000 (1048576 bytes)
[    0.031168] print_constraints: dummy:
[    0.031192] Time: 21:14:17  Date: 12/17/11
[    0.031215] NET: Registered protocol family 16
[    0.031283] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.031285] ACPI: bus type pci registered
[    0.031331] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.031334] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.039658] PCI: Using configuration type 1 for base access
[    0.040139] bio: create slab <bio-0> at 0
[    0.041688] ACPI: EC: Look up EC in DSDT
[    0.043125] ACPI: Executed 1 blocks of module-level executable AML code
[    0.046118] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.046938] ACPI: SSDT 00000000bce90718 00667 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.047318] ACPI: Dynamic OEM Table Load:
[    0.047321] ACPI: SSDT           (null) 00667 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.055920] ACPI: Interpreter enabled
[    0.055922] ACPI: (supports S0 S3 S4 S5)
[    0.055940] ACPI: Using PIC for interrupt routing
[    0.060623] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.060767] ACPI: No dock devices found.
[    0.060769] HEST: Table not found.
[    0.060771] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.061000] \_SB_.PCI0:_OSC invalid UUID
[    0.061001] _OSC request data:1 8 1f
[    0.061004] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.061382] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.061384] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.061386] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.061388] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[    0.061397] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    0.061425] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    0.061446] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.061448] pci 0000:00:01.0: PME# disabled
[    0.061464] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
[    0.061472] pci 0000:00:02.0: reg 10: [mem 0xe1400000-0xe17fffff 64bit]
[    0.061478] pci 0000:00:02.0: reg 18: [mem 0xd8000000-0xdfffffff 64bit pref]
[    0.061482] pci 0000:00:02.0: reg 20: [io  0x6000-0x603f]
[    0.061527] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.061549] pci 0000:00:16.0: reg 10: [mem 0xe7804000-0xe780400f 64bit]
[    0.061609] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.061613] pci 0000:00:16.0: PME# disabled
[    0.061643] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.061906] pci 0000:00:1a.0: reg 10: [mem 0xe7809000-0xe78093ff]
[    0.063411] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.063415] pci 0000:00:1a.0: PME# disabled
[    0.063439] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.063454] pci 0000:00:1b.0: reg 10: [mem 0xe7800000-0xe7803fff 64bit]
[    0.063506] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.063510] pci 0000:00:1b.0: PME# disabled
[    0.063529] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.063589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.063593] pci 0000:00:1c.0: PME# disabled
[    0.063614] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    0.063673] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.063677] pci 0000:00:1c.1: PME# disabled
[    0.063700] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    0.063759] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.063763] pci 0000:00:1c.3: PME# disabled
[    0.063792] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.064051] pci 0000:00:1d.0: reg 10: [mem 0xe7808000-0xe78083ff]
[    0.065563] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.065567] pci 0000:00:1d.0: PME# disabled
[    0.065590] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[    0.065700] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    0.065718] pci 0000:00:1f.2: reg 10: [io  0x6088-0x608f]
[    0.065726] pci 0000:00:1f.2: reg 14: [io  0x6094-0x6097]
[    0.065733] pci 0000:00:1f.2: reg 18: [io  0x6080-0x6087]
[    0.065741] pci 0000:00:1f.2: reg 1c: [io  0x6090-0x6093]
[    0.065749] pci 0000:00:1f.2: reg 20: [io  0x6060-0x607f]
[    0.065757] pci 0000:00:1f.2: reg 24: [mem 0xe7807000-0xe78077ff]
[    0.065788] pci 0000:00:1f.2: PME# supported from D3hot
[    0.065792] pci 0000:00:1f.2: PME# disabled
[    0.065809] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.065823] pci 0000:00:1f.3: reg 10: [mem 0xe7805000-0xe78050ff 64bit]
[    0.065844] pci 0000:00:1f.3: reg 20: [io  0x6040-0x605f]
[    0.065893] pci 0000:01:00.0: [10de:0ded] type 0 class 0x000300
[    0.065901] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff]
[    0.065909] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.065917] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.065922] pci 0000:01:00.0: reg 24: [io  0x5000-0x507f]
[    0.065928] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    0.065957] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.065960] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.065962] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe10fffff]
[    0.065965] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.066041] pci 0000:07:00.0: [8086:0083] type 0 class 0x000280
[    0.066085] pci 0000:07:00.0: reg 10: [mem 0xe6800000-0xe6801fff 64bit]
[    0.066255] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.066263] pci 0000:07:00.0: PME# disabled
[    0.066320] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.066324] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.066328] pci 0000:00:1c.0:   bridge window [mem 0xe6800000-0xe77fffff]
[    0.066334] pci 0000:00:1c.0:   bridge window [mem 0xe1800000-0xe27fffff 64bit pref]
[    0.066398] pci 0000:0d:00.0: [1969:1083] type 0 class 0x000200
[    0.066425] pci 0000:0d:00.0: reg 10: [mem 0xe5800000-0xe583ffff 64bit]
[    0.066440] pci 0000:0d:00.0: reg 18: [io  0x3000-0x307f]
[    0.066535] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.066540] pci 0000:0d:00.0: PME# disabled
[    0.066577] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.066581] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.066585] pci 0000:00:1c.1:   bridge window [mem 0xe5800000-0xe67fffff]
[    0.066592] pci 0000:00:1c.1:   bridge window [mem 0xe2800000-0xe37fffff 64bit pref]
[    0.066635] pci 0000:00:1c.3: PCI bridge to [bus 13-18]
[    0.066638] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.066642] pci 0000:00:1c.3:   bridge window [mem 0xe4800000-0xe57fffff]
[    0.066649] pci 0000:00:1c.3:   bridge window [mem 0xe3800000-0xe47fffff 64bit pref]
[    0.066667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.066776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.066800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.066824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.066856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.066909] \_SB_.PCI0:_OSC invalid UUID
[    0.066910] _OSC request data:1 1f 1f
[    0.066913]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.066936] \_SB_.PCI0:_OSC invalid UUID
[    0.066937] _OSC request data:1 0 1d
[    0.066939]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.066941] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.069029] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.069066] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.069100] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.069134] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.069167] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.069201] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.069234] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.069267] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.069326] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.069331] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.069333] vgaarb: loaded
[    0.069334] vgaarb: bridge control possible 0000:01:00.0
[    0.069335] vgaarb: bridge control possible 0000:00:02.0
[    0.069440] SCSI subsystem initialized
[    0.069466] libata version 3.00 loaded.
[    0.069492] usbcore: registered new interface driver usbfs
[    0.069500] usbcore: registered new interface driver hub
[    0.069513] usbcore: registered new device driver usb
[    0.069561] PCI: Using ACPI for IRQ routing
[    0.071432] PCI: pci_cache_line_size set to 64 bytes
[    0.071497] reserve RAM buffer: 0000000000099800 - 000000000009ffff
[    0.071499] reserve RAM buffer: 00000000bce3f000 - 00000000bfffffff
[    0.071501] reserve RAM buffer: 00000000bd000000 - 00000000bfffffff
[    0.071503] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
[    0.071560] NetLabel: Initializing
[    0.071562] NetLabel:  domain hash size = 128
[    0.071563] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.071570] NetLabel:  unlabeled traffic allowed by default
[    0.071598] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.071602] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.073624] Switching to clocksource hpet
[    0.076283] Switched to NOHz mode on CPU #0
[    0.077492] AppArmor: AppArmor Filesystem Enabled
[    0.077509] pnp: PnP ACPI init
[    0.077518] ACPI: bus type pnp registered
[    0.078339] pnp 00:00: [bus 00-3e]
[    0.078340] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.078342] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.078343] pnp 00:00: [io  0x0d00-0xffff window]
[    0.078345] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.078347] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.078348] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.078349] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.078351] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.078352] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.078354] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.078355] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.078357] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.078358] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.078359] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.078361] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.078362] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.078364] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.078365] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[    0.078414] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.078432] pnp 00:01: [io  0x0000-0x001f]
[    0.078434] pnp 00:01: [io  0x0081-0x0091]
[    0.078435] pnp 00:01: [io  0x0093-0x009f]
[    0.078436] pnp 00:01: [io  0x00c0-0x00df]
[    0.078437] pnp 00:01: [dma 4]
[    0.078452] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.078458] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.078471] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.078527] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.078541] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.078548] pnp 00:04: [io  0x00f0]
[    0.078550] pnp 00:04: [irq 13]
[    0.078564] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.078572] pnp 00:05: [io  0x002e-0x002f]
[    0.078573] pnp 00:05: [io  0x004e-0x004f]
[    0.078576] pnp 00:05: [io  0x0061]
[    0.078577] pnp 00:05: [io  0x0063]
[    0.078578] pnp 00:05: [io  0x0065]
[    0.078579] pnp 00:05: [io  0x0067]
[    0.078580] pnp 00:05: [io  0x0070]
[    0.078581] pnp 00:05: [io  0x0080]
[    0.078582] pnp 00:05: [io  0x0092]
[    0.078584] pnp 00:05: [io  0x00b2-0x00b3]
[    0.078585] pnp 00:05: [io  0x0680-0x069f]
[    0.078586] pnp 00:05: [io  0x1000-0x100f]
[    0.078587] pnp 00:05: [io  0x0810-0x0813]
[    0.078589] pnp 00:05: [io  0xffff]
[    0.078590] pnp 00:05: [io  0x0400-0x0453]
[    0.078591] pnp 00:05: [io  0x0454-0x0457]
[    0.078592] pnp 00:05: [io  0x0458-0x047f]
[    0.078593] pnp 00:05: [io  0x0500-0x057f]
[    0.078594] pnp 00:05: [io  0x164e-0x164f]
[    0.078596] pnp 00:05: [io  0x0380-0x0387]
[    0.078597] pnp 00:05: [io  0x06a0-0x06a7]
[    0.078633] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.078635] system 00:05: [io  0x1000-0x100f] has been reserved
[    0.078636] system 00:05: [io  0x0810-0x0813] has been reserved
[    0.078638] system 00:05: [io  0xffff] has been reserved
[    0.078639] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.078641] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.078643] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.078644] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.078646] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.078648] system 00:05: [io  0x0380-0x0387] has been reserved
[    0.078649] system 00:05: [io  0x06a0-0x06a7] has been reserved
[    0.078651] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.078657] pnp 00:06: [io  0x0070-0x0077]
[    0.078658] pnp 00:06: [irq 8]
[    0.078672] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.078683] pnp 00:07: [io  0x0060]
[    0.078684] pnp 00:07: [io  0x0064]
[    0.078685] pnp 00:07: [irq 1]
[    0.078699] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.078761] pnp 00:08: [irq 12]
[    0.078777] pnp 00:08: Plug and Play ACPI device, IDs STLc033 PNP0f13 (active)
[    0.078847] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.078849] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[    0.078850] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    0.078851] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    0.078852] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
[    0.078854] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.078855] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[    0.078856] pnp 00:09: [mem 0xff000000-0xffffffff]
[    0.078858] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    0.078859] pnp 00:09: [mem 0xbfa00000-0xbfa00fff]
[    0.078885] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.078887] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.078889] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.078891] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.078892] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.078894] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.078896] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.078898] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.078900] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.078901] system 00:09: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.078903] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.079078] pnp 00:0a: [mem 0x20000000-0x201fffff]
[    0.079080] pnp 00:0a: [mem 0x40000000-0x401fffff]
[    0.079116] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[    0.079118] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[    0.079120] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.079133] pnp: PnP ACPI: found 11 devices
[    0.079134] ACPI: ACPI bus type pnp unregistered
[    0.084451] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.084455] PCI: max bus depth: 1 pci_try_num: 2
[    0.084483] pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe107ffff pref]
[    0.084485] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.084487] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.084490] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe10fffff]
[    0.084492] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.084495] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[    0.084498] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.084503] pci 0000:00:1c.0:   bridge window [mem 0xe6800000-0xe77fffff]
[    0.084507] pci 0000:00:1c.0:   bridge window [mem 0xe1800000-0xe27fffff 64bit pref]
[    0.084513] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[    0.084516] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.084521] pci 0000:00:1c.1:   bridge window [mem 0xe5800000-0xe67fffff]
[    0.084525] pci 0000:00:1c.1:   bridge window [mem 0xe2800000-0xe37fffff 64bit pref]
[    0.084531] pci 0000:00:1c.3: PCI bridge to [bus 13-18]
[    0.084534] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.084539] pci 0000:00:1c.3:   bridge window [mem 0xe4800000-0xe57fffff]
[    0.084543] pci 0000:00:1c.3:   bridge window [mem 0xe3800000-0xe47fffff 64bit pref]
[    0.084600] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.084602] PCI: setting IRQ 11 as level-triggered
[    0.084607] pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.084609] pci 0000:00:01.0: setting latency timer to 64
[    0.084652] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.084654] pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.084658] pci 0000:00:1c.0: setting latency timer to 64
[    0.084665] pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.084669] pci 0000:00:1c.1: setting latency timer to 64
[    0.084710] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[    0.084712] PCI: setting IRQ 10 as level-triggered
[    0.084716] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    0.084720] pci 0000:00:1c.3: setting latency timer to 64
[    0.084724] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.084725] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.084727] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.084728] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.084730] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.084732] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe10fffff]
[    0.084733] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.084735] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.084736] pci_bus 0000:07: resource 1 [mem 0xe6800000-0xe77fffff]
[    0.084738] pci_bus 0000:07: resource 2 [mem 0xe1800000-0xe27fffff 64bit pref]
[    0.084740] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.084741] pci_bus 0000:0d: resource 1 [mem 0xe5800000-0xe67fffff]
[    0.084743] pci_bus 0000:0d: resource 2 [mem 0xe2800000-0xe37fffff 64bit pref]
[    0.084744] pci_bus 0000:13: resource 0 [io  0x2000-0x2fff]
[    0.084746] pci_bus 0000:13: resource 1 [mem 0xe4800000-0xe57fffff]
[    0.084747] pci_bus 0000:13: resource 2 [mem 0xe3800000-0xe47fffff 64bit pref]
[    0.084769] NET: Registered protocol family 2
[    0.084950] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.085732] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.086827] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.086947] TCP: Hash tables configured (established 524288 bind 65536)
[    0.086949] TCP reno registered
[    0.086961] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.086990] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.087065] NET: Registered protocol family 1
[    0.087078] pci 0000:00:02.0: Boot video device
[    0.117649] PCI: CLS 64 bytes, default 64
[    0.117662] DMAR: Host address width 36
[    0.117667] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.117717] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.117719] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.117724] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.117725] DMAR: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
[    0.117726] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff
[    0.117728] DMAR: No ATSR found
[    0.117731] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.117733] Placing 64MB software IO TLB between ffff8800b8e35000 - ffff8800bce35000
[    0.117734] software IO TLB at phys 0xb8e35000 - 0xbce35000
[    0.117744] Simple Boot Flag at 0x44 set to 0x1
[    0.117939] audit: initializing netlink socket (disabled)
[    0.117946] type=2000 audit(1324156457.112:1): initialized
[    0.133823] Trying to unpack rootfs image as initramfs...
[    0.169627] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.201583] VFS: Disk quotas dquot_6.5.2
[    0.201620] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.202006] fuse init (API version 7.16)
[    0.202060] msgmni has been set to 15873
[    0.213548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.217462] io scheduler noop registered
[    0.217464] io scheduler deadline registered
[    0.217497] io scheduler cfq registered (default)
[    0.217565] pcieport 0000:00:01.0: setting latency timer to 64
[    0.217746] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.217760] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.217786] intel_idle: MWAIT substates: 0x21120
[    0.217788] intel_idle: v0.4 model 0x2A
[    0.217789] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.218234] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.218844] ACPI: AC Adapter [ACAD] (on-line)
[    0.218892] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.218896] ACPI: Power Button [PWRB]
[    0.218920] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.218922] ACPI: Sleep Button [SLPB]
[    0.218949] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.219403] ACPI: Lid Switch [LID0]
[    0.219435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.219438] ACPI: Power Button [PWRF]
[    0.219458] ACPI: acpi_idle yielding to intel_idle
[    0.223450] thermal LNXTHERM:00: registered as thermal_zone0
[    0.223452] ACPI: Thermal Zone [TZ01] (64 C)
[    0.223464] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.223479] ERST: Table is not found!
[    0.223525] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.224210] Linux agpgart interface v0.103
[    0.224261] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    0.224342] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 131072K mappable
[    0.224872] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.224949] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[    0.225634] brd: module loaded
[    0.226021] loop: module loaded
[    0.229538] Fixed MDIO Bus: probed
[    0.229552] PPP generic driver version 2.4.2
[    0.229575] tun: Universal TUN/TAP device driver, 1.6
[    0.229577] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.229620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.229635] ehci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.229651] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.229654] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.229676] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.229698] ehci_hcd 0000:00:1a.0: debug port 2
[    0.233565] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.234176] ACPI: Battery Slot [BAT0] (battery absent)
[    0.237483] ehci_hcd 0000:00:1a.0: irq 11, io mem 0xe7809000
[    0.249435] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.249548] hub 1-0:1.0: USB hub found
[    0.249552] hub 1-0:1.0: 2 ports detected
[    0.249670] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[    0.249673] ehci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
[    0.249695] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.249698] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.249726] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.249748] ehci_hcd 0000:00:1d.0: debug port 2
[    0.253618] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.257410] ehci_hcd 0000:00:1d.0: irq 10, io mem 0xe7808000
[    0.269380] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.269485] hub 2-0:1.0: USB hub found
[    0.269489] hub 2-0:1.0: 2 ports detected
[    0.269533] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.269542] uhci_hcd: USB Universal Host Controller Interface driver
[    0.269589] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2A] at 0x60,0x64 irq 1,12
[    0.272636] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.272640] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.277446] mousedev: PS/2 mouse device common for all mice
[    0.277553] rtc_cmos 00:06: RTC can wake from S4
[    0.277635] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.277655] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.277721] device-mapper: uevent: version 1.0.3
[    0.277765] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    0.277792] cpuidle: using governor ladder
[    0.277822] cpuidle: using governor menu
[    0.277824] EFI Variables Facility v0.08 2004-May-17
[    0.277956] TCP cubic registered
[    0.278032] NET: Registered protocol family 10
[    0.278287] NET: Registered protocol family 17
[    0.278297] Registering the dns_resolver key type
[    0.278358] PM: Hibernation image not present or could not be loaded.
[    0.278367] registered taskstats version 1
[    0.340231] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.380350] Freeing initrd memory: 13440k freed
[    0.385564]   Magic number: 7:710:247
[    0.385634] rtc_cmos 00:06: setting system clock to 2011-12-17 21:14:17 UTC (1324156457)
[    0.385811] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.385812] EDD information not available.
[    0.386758] Freeing unused kernel memory: 984k freed
[    0.386850] Write protecting the kernel read-only data: 10240k
[    0.386939] Freeing unused kernel memory: 16k freed
[    0.389481] Freeing unused kernel memory: 1396k freed
[    0.399249] udevd[77]: starting version 173
[    0.448575] ahci 0000:00:1f.2: version 3.0
[    0.448588] ahci 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[    0.448659] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    0.448661] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    0.448666] ahci 0000:00:1f.2: setting latency timer to 64
[    0.457142] scsi0 : ahci
[    0.460243] scsi1 : ahci
[    0.462707] scsi2 : ahci
[    0.464369] scsi3 : ahci
[    0.467227] scsi4 : ahci
[    0.468342] atl1c 0000:0d:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.468352] atl1c 0000:0d:00.0: setting latency timer to 64
[    0.470511] scsi5 : ahci
[    0.470555] ata1: SATA max UDMA/133 abar m2048@0xe7807000 port 0xe7807100 irq 10
[    0.470558] ata2: SATA max UDMA/133 abar m2048@0xe7807000 port 0xe7807180 irq 10
[    0.470560] ata3: DUMMY
[    0.470560] ata4: DUMMY
[    0.470561] ata5: DUMMY
[    0.470562] ata6: DUMMY
[    0.560949] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    0.593384] atl1c 0000:0d:00.0: version 1.0.1.0-NAPI
[    0.693374] hub 1-1:1.0: USB hub found
[    0.693480] hub 1-1:1.0: 6 ports detected
[    0.788605] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.788640] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.790391] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.01, max UDMA/100
[    0.792388] ata2.00: configured for UDMA/100
[    0.804577] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    0.825490] ata1.00: ATA-8: WDC WD7500BPVT-22HXZT3, 01.01A01, max UDMA/133
[    0.825497] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    0.829691] ata1.00: configured for UDMA/133
[    0.829835] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-2 01.0 PQ: 0 ANSI: 5
[    0.829906] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.829969] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    0.829970] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.829995] sd 0:0:0:0: [sda] Write Protect is off
[    0.829997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.830008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.831205] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.01 PQ: 0 ANSI: 5
[    0.833672] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.833679] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.833810] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.833835] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.877132]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[    0.877380] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.937015] hub 2-1:1.0: USB hub found
[    0.937116] hub 2-1:1.0: 6 ports detected
[    1.008414] usb 1-1.2: new high speed USB device number 3 using ehci_hcd
[    1.132089] Refined TSC clocksource calibration: 2793.653 MHz.
[    1.132099] Switching to clocksource tsc
[    1.295976] usb 1-1.5: new high speed USB device number 4 using ehci_hcd
[    2.096980] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   13.157195] udevd[324]: starting version 173
[   13.186624] lp: driver loaded but no devices found
[   13.199138] Adding 3735548k swap on /dev/sda5.  Priority:-1 extents:1 across:3735548k
[   13.210241] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   13.218631] mei 0000:00:16.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   13.218637] mei 0000:00:16.0: setting latency timer to 64
[   13.233657] [drm] Initialized drm 1.1.0 20060810
[   13.289158] cfg80211: Calling CRDA to update world regulatory domain
[   13.291517] wmi: Mapper loaded
[   13.294660] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   13.294663] i915 0000:00:02.0: setting latency timer to 64
[   13.372572] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   13.401010] MXM: GUID detected in BIOS
[   13.401241] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x0000000000000003) is beyond end of object (20110413/exoparg2-418)
[   13.401245] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.VGA_._DSM] (Node ffff880233059668), AE_AML_BUFFER_LIMIT (20110413/psparse-536)
[   13.401252] failed to evaluate _DSM: 12298
[   13.401254] VGA switcheroo: detected DSM switching method \_SB_.PCI0.PEG0.VGA_ handle
[   13.401274] nouveau 0000:01:00.0: power state changed by ACPI to D0
[   13.401277] nouveau 0000:01:00.0: power state changed by ACPI to D0
[   13.401279] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[   13.401285] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   13.401288] nouveau 0000:01:00.0: setting latency timer to 64
[   13.401551] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   13.401553] iwlagn: Copyright(c) 2003-2011 Intel Corporation
[   13.401584] iwlagn 0000:07:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   13.401592] iwlagn 0000:07:00.0: setting latency timer to 64
[   13.401620] iwlagn 0000:07:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[   13.422830] iwlagn 0000:07:00.0: device EEPROM VER=0x15d, CALIB=0x6
[   13.422831] iwlagn 0000:07:00.0: Device SKU: 0X9
[   13.422833] iwlagn 0000:07:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[   13.447270] iwlagn 0000:07:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[   13.558435] type=1400 audit(1324149270.690:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=638 comm="apparmor_parser"
[   13.558669] type=1400 audit(1324149270.690:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=638 comm="apparmor_parser"
[   13.558816] type=1400 audit(1324149270.690:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=638 comm="apparmor_parser"
[   13.563338] type=1400 audit(1324149270.694:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=687 comm="apparmor_parser"
[   13.563579] type=1400 audit(1324149270.694:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=687 comm="apparmor_parser"
[   13.563727] type=1400 audit(1324149270.694:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=687 comm="apparmor_parser"
[   13.657831] Linux video capture interface: v2.00
[   13.670228] uvcvideo: Found UVC 1.00 device USB Webcam (5986:0241)
[   13.679440] input: USB Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[   13.679511] usbcore: registered new interface driver uvcvideo
[   13.679512] USB Video Class driver (v1.1.0)
[   13.709922] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   13.724942] Initializing rts5139 USB card reader driver...
[   13.747058] cfg80211: World regulatory domain updated:
[   13.747061] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.747063] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.747064] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.747066] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.747067] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.747069] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.753505] scsi6 : SCSI emulation for RTS5139 USB card reader
[   13.757025] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   13.757045] scsi: killing requests for dead queue
[   13.757192] scsi: killing requests for dead queue
[   13.757209] scsi: killing requests for dead queue
[   13.757225] scsi: killing requests for dead queue
[   13.757240] scsi: killing requests for dead queue
[   13.757331] scsi: killing requests for dead queue
[   13.757347] scsi: killing requests for dead queue
[   13.757362] scsi: killing requests for dead queue
[   13.757554] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   13.760414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   13.761421] usbcore: registered new interface driver rts5139
[   13.761423] Realtek rts5139 USB card reader support registered.
[   13.766993] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.766995] [drm] Driver supports precise vblank timestamp query.
[   13.767143] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[   13.767155] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   13.767157] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   13.769902] iwlagn 0000:07:00.0: loaded firmware version 39.31.5.1 build 35138
[   13.769968] Registered led device: phy0-led
[   13.769986] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   13.841676] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   13.960694] fbcon: inteldrmfb (fb0) is primary device
[   13.961542] Console: switching to colour frame buffer device 170x48
[   13.961555] fb0: inteldrmfb frame buffer device
[   13.961556] drm: registered panic notifier
[   13.973434] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 4
[   14.117522] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[   14.201954] type=1400 audit(1324149271.334:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=891 comm="apparmor_parser"
[   14.207768] type=1400 audit(1324149271.338:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=894 comm="apparmor_parser"
[   14.208008] type=1400 audit(1324149271.338:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=894 comm="apparmor_parser"
[   14.208157] type=1400 audit(1324149271.338:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=894 comm="apparmor_parser"
[   14.344912] acpi device:2f: registered as cooling_device1
[   14.345200] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input6
[   14.345266] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[   14.346158] acpi device:36: registered as cooling_device2
[   14.346609] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[   14.346661] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.346942] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.348115] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1680a1)
[   14.352685] vga_switcheroo: enabled
[   14.352692] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   14.362463] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   14.362464] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[   14.362472] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   14.362473] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM
[   14.368479] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input8
[   14.371501] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[   14.371505] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
[   14.371561] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.478978] init: failsafe main process (839) killed by TERM signal
[   14.480873] init: apport pre-start process (986) terminated with status 1
[   14.481809] init: alsa-restore main process (995) terminated with status 19
[   14.509940] init: apport post-stop process (1031) terminated with status 1
[   14.582711] nouveau 0000:01:00.0: Invalid ROM contents
[   14.593706] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.607373] atl1c 0000:0d:00.0: Unable to allocate MSI interrupt Error: -6
[   14.612957] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   14.612959] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI
[   14.688713] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.974388] hda_codec: ALC269VB: BIOS auto-probing.
[   14.980649] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[   14.980930] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.981176] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.981262] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   16.899286] wlan0: authenticate with 00:1e:e3:d2:7b:ac (try 1)
[   16.901966] wlan0: authenticated
[   16.905603] wlan0: associate with 00:1e:e3:d2:7b:ac (try 1)
[   16.909420] wlan0: RX AssocResp from 00:1e:e3:d2:7b:ac (capab=0x431 status=0 aid=1)
[   16.909422] wlan0: associated
[   16.914816] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   17.169600] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   17.169604] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   17.169606] [drm] nouveau 0000:01:00.0: Bios version 70.08.53.00
[   17.169607] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[   17.169610] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   17.169611] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   17.169613] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02014300 00000000
[   17.169615] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 0000000e 00000000
[   17.169617] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[   17.169618] [drm] nouveau 0000:01:00.0:   0: 0x00000340: type 0x40 idx 0 tag 0xff
[   17.169620] [drm] nouveau 0000:01:00.0:   1: 0x00001061: type 0x61 idx 1 tag 0x07
[   17.169622] [drm] nouveau 0000:01:00.0:   2: 0x00000147: type 0x47 idx 2 tag 0xff
[   17.169623] [drm] nouveau 0000:01:00.0:   3: 0x00202346: type 0x46 idx 3 tag 0x08
[   17.169625] [drm] nouveau 0000:01:00.0:   4: 0x00000400: type 0x00 idx 4 tag 0xff
[   17.169626] [drm] nouveau 0000:01:00.0:   5: 0x00000210: type 0x10 idx 5 tag 0xff
[   17.169627] [drm] nouveau 0000:01:00.0:   6: 0x00000211: type 0x11 idx 6 tag 0xff
[   17.169629] [drm] nouveau 0000:01:00.0:   7: 0x00000213: type 0x13 idx 7 tag 0xff
[   17.169642] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[   17.169644] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD5D7
[   17.195515] [drm] nouveau 0000:01:00.0: 0xD581: i2c wr fail: -6
[   17.235648] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDC33
[   17.262462] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE39
[   17.262467] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEE3D
[   17.262517] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEF25
[   17.262518] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEF8A
[   17.315872] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   17.315876] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 50MHz shader 101MHz voltage 850mV timing 0
[   17.315879] [drm] nouveau 0000:01:00.0: 1: memory 324MHz core 202MHz shader 405MHz voltage 850mV timing 1
[   17.315881] [drm] nouveau 0000:01:00.0: 3: memory 900MHz core 600MHz shader 1200MHz voltage 950mV timing 2
[   17.315917] [TTM] Zone  kernel: Available graphics memory: 4071496 kiB.
[   17.315918] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[   17.315919] [TTM] Initializing pool allocator.
[   17.315928] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[   17.319300] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   17.319308] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset, please report!
[   17.326221] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   17.326223] [drm] No driver support for vblank timestamp query.
[   17.377601] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x8020000, bo ffff88021fe52000
[   17.377677] fb1: nouveaufb frame buffer device
[   17.377681] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 1
[   17.415620] ppdev: user-space parallel port driver
[   17.779621] Bluetooth: Core ver 2.16
[   17.779636] NET: Registered protocol family 31
[   17.779637] Bluetooth: HCI device and connection manager initialized
[   17.779639] Bluetooth: HCI socket layer initialized
[   17.779640] Bluetooth: L2CAP socket layer initialized
[   17.779884] Bluetooth: SCO socket layer initialized
[   17.784743] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.784745] Bluetooth: BNEP filters: protocol multicast
[   17.880886] Bluetooth: RFCOMM TTY layer initialized
[   17.880889] Bluetooth: RFCOMM socket layer initialized
[   17.880890] Bluetooth: RFCOMM ver 1.11
[   23.944424] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[   24.651288] init: plymouth-stop pre-start process (1524) terminated with status 1
[   27.013520] wlan0: no IPv6 routers present

[if]

@mdegis, tüm çekirdeklerim görüne bilmesi için çekirdeğin SMP'yi desteklemesi gerek ki Ubuntu çekirdeği bunu destekliyor¹ Ama sanırım girdiğin "noapic" ve "nolapic" parametrelerinden dolayı bu özellik kapanıyor. Çünkü acpi yüklenmesinden sonra kapanıyor smp.² Bu durumda ya böyle bi çözüm bulacağız ya da o iki parametreyi kaldırıp ekran kilitlenmesine bir çare bulacağız. Ama önce yine BIOS'a dönelim ve gelişmiş ayarlarda felan "MPS Table Mode" gibi bir özellik varsa o "Full Table APIC"'e çevrilebiliniyor mu bak. Bilgisayarın marka ve modelini alayım.


1

Kod Seç Genişlet

Linux version 3.0.0-14-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)
found SMP MP-table at [ffff8800000fe1b0] fe1b0

2

Kod Seç Genişlet

SMP disabled
no APIC, boot with the "lapic" boot parameter to force-enable it
no hardware sampling interrupt available

[mdegis]

@if, BIOS'umda apci ile ilgili olabilcek iki tane secenek var,  birisi AC Mode Fan Always on  <Enabled>  diğeri de DC Mode Fan Always on  <Enabled>  daha önce hiç bunları değiştirmeyi denemedim.
Bilgisayarımın markası Casper Nirvana CNW.2640-8N35P, anakartım ise Quanta SWH. Son olaraksa ilk akılıma gelen 2GB Nvidia GT520M Optimus ekran kartımın Ubuntu ile uyumlu olmamasından -yani O/B kart ile normal kartın cakısması yüzünden- böle bir sorun alabileceğimdi ama bu parametreleri noapic ve nolapic parameterini kullandıktan sonra bu fikrimi desteklicek bir sorun yaşamadım. Sanırım anakart driverlarım linux ile uyumlu değil?

[if]

Anakart sürücülerinin uyumlu olup olmadığını bilmiyorum ama optimus kurarak ekran kartı sorununu aşabiliriz.