internete giremiyorum?

[bytan]

Şifreleme türü ile şifrenin kendisini değiştirerek durumuna tekrar bak. Ayrıca varolan durumunda bağlanmaya çalıştığında ve bağlanamadığında alttakilerin çıktısı ne oluyor?

Kod Seç Genişlet

dmesg
dmesg | tail

[yetuar]

@yetuar, başka kablosuz ağa girme imkânın varsa girip bak. Şifreleme türünü değiştirip dene. Olmazsa elle bağlarsın.

Başka kablosuz ağlara rahatlıkla bağlanabiliyo. Diğer bütün şifreleme türlerini denedim. http://forum.ubuntu-tr.net/index.php?topic=1768.0 denedim ama beceremedim

[if]

@yetuar, @bytan'ın istediği çıktıları alabilir miyiz? Şifreleme türlerini nasıl değiştiriyorsunuz?

[yetuar]

internete bağlanmaya çalışırken böyle
dmesg:

Kod Seç Genişlet

[   24.094598] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   24.094601] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
[   24.112967] rtl8192: wireless switch is on
[   24.131525] type=1400 audit(1315501132.876:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=709 comm="apparmor_parser"
[   24.132742] type=1400 audit(1315501132.876:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=710 comm="apparmor_parser"
[   24.133445] type=1400 audit(1315501132.876:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710 comm="apparmor_parser"
[   24.133897] type=1400 audit(1315501132.876:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=710 comm="apparmor_parser"
[   24.137238] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   24.137245] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   24.137247] [drm] Driver supports precise vblank timestamp query.
[   24.189210] input: HP WMI hotkeys as /devices/virtual/input/input7
[   24.228215] [fglrx] Maximum main memory to use for locked dma buffers: 2743 MBytes.
[   24.228472] [fglrx]   vendor: 1002 device: 68e0 count: 1
[   24.228904] [fglrx] ioport: bar 4, base 0x5000, size: 0x100
[   24.228916] pci 0000:01:00.0: power state changed by ACPI to D0
[   24.228920] pci 0000:01:00.0: power state changed by ACPI to D0
[   24.228925] pci 0000:01:00.0: enabling device (0006 -> 0007)
[   24.228933] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   24.228938] pci 0000:01:00.0: setting latency timer to 64
[   24.229152] [fglrx] Kernel PAT support is enabled
[   24.229170] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
[   24.279740] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   24.279745] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   24.319858] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   24.319862] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319865] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   24.319868] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319871] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   24.319873] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319876] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   24.319879] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319881] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   24.319884] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319886] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   24.319889] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319891] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   24.319894] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319896] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   24.319899] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319901] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   24.319904] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319906] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   24.319909] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319911] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   24.319914] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319916] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   24.319919] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319922] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   24.319924] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319927] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   24.319929] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319933] cfg80211: World regulatory domain updated:
[   24.319934] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.319937] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.319940] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.319943] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.319945] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.319948] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.353796] fbcon: inteldrmfb (fb0) is primary device
[   24.354628] Console: switching to colour frame buffer device 170x48
[   24.354660] fb0: inteldrmfb frame buffer device
[   24.354662] drm: registered panic notifier
[   24.355084] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   24.374981] psmouse serio1: ID: 10 00 64
[   24.415895] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   24.415901] ===>rtllib_start_scan()
[   24.415950] =====>rtl8192_set_chan()====ch:2
[   24.416139] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.427040] r8169 0000:04:00.0: eth0: link down
[   24.427208] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.435345] acpi device:02: registered as cooling_device6
[   24.439076] acpi device:03: registered as cooling_device7
[   24.439943] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   24.440219] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   24.443478] acpi device:0d: registered as cooling_device8
[   24.444103] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input9
[   24.444240] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   24.444931] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   24.450929] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[   24.451013] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   24.451047] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   24.464773] =====>rtl8192_set_chan()====ch:1
[   24.503412] hda_codec: ALC272: BIOS auto-probing.
[   24.510553] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   24.510668] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   24.510912] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   24.510974] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[   24.510995] HDA Intel 0000:01:00.1: setting latency timer to 64
[   24.525989] hda-intel: Enable sync_write for AMD chipset
[   24.545328] usbcore: registered new interface driver ath3k
[   24.578830] =====>rtl8192_set_chan()====ch:2
[   24.689865] =====>rtl8192_set_chan()====ch:3
[   24.715640] usb 1-1.3: USB disconnect, address 3
[   24.743407] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 4
[   24.801769] =====>rtl8192_set_chan()====ch:4
[   24.913710] =====>rtl8192_set_chan()====ch:5
[   25.027884] =====>rtl8192_set_chan()====ch:6
[   25.145642] =====>rtl8192_set_chan()====ch:7
[   25.257535] =====>rtl8192_set_chan()====ch:8
[   25.369478] =====>rtl8192_set_chan()====ch:9
[   25.428498] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input12
[   25.481474] =====>rtl8192_set_chan()====ch:10
[   25.593347] =====>rtl8192_set_chan()====ch:11
[   25.705321] =====>rtl8192_set_chan()====ch:12
[   25.821233] =====>rtl8192_set_chan()====ch:13
[   25.936568] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   25.937060] =====>rtl8192_set_chan()====ch:1
[   25.947178] usb 1-1.3: new full speed USB device using ehci_hcd and address 4
[   26.040844] ppdev: user-space parallel port driver
[   26.049024] =====>rtl8192_set_chan()====ch:2
[   26.056886] Bluetooth: Core ver 2.15
[   26.056910] NET: Registered protocol family 31
[   26.056911] Bluetooth: HCI device and connection manager initialized
[   26.056913] Bluetooth: HCI socket layer initialized
[   26.059304] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   26.060252] usbcore: registered new interface driver btusb
[   26.074753] Bluetooth: L2CAP ver 2.15
[   26.074756] Bluetooth: L2CAP socket layer initialized
[   26.083359] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.083363] Bluetooth: BNEP filters: protocol multicast
[   26.087508] Bluetooth: SCO (Voice Link) ver 0.6
[   26.087511] Bluetooth: SCO socket layer initialized
[   26.161061] =====>rtl8192_set_chan()====ch:3
[   26.272911] =====>rtl8192_set_chan()====ch:4
[   26.384826] =====>rtl8192_set_chan()====ch:5
[   26.496788] =====>rtl8192_set_chan()====ch:6
[   26.608754] =====>rtl8192_set_chan()====ch:7
[   26.720699] =====>rtl8192_set_chan()====ch:8
[   26.832554] =====>rtl8192_set_chan()====ch:9
[   26.944569] =====>rtl8192_set_chan()====ch:10
[   27.053680] Bluetooth: RFCOMM TTY layer initialized
[   27.053686] Bluetooth: RFCOMM socket layer initialized
[   27.053688] Bluetooth: RFCOMM ver 1.11
[   27.056434] =====>rtl8192_set_chan()====ch:11
[   27.168591] =====>rtl8192_set_chan()====ch:12
[   27.280335] =====>rtl8192_set_chan()====ch:13
[   27.392438] ===>rtllib_wx_set_power(): power disable
[   27.493229] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   29.119812] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   31.904323] show_signal_msg: 24 callbacks suppressed
[   31.904327] unity_support_t[1455]: segfault at 4 ip 00dc7824 sp bf9070b0 error 4 in libGL.so.1.2[d4e000+c9000]
[   33.942838] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   33.942875] =====>rtl8192_set_chan()====ch:1
[   34.056277] =====>rtl8192_set_chan()====ch:2
[   34.168256] =====>rtl8192_set_chan()====ch:3
[   34.280105] =====>rtl8192_set_chan()====ch:4
[   34.392033] =====>rtl8192_set_chan()====ch:5
[   34.505303] =====>rtl8192_set_chan()====ch:6
[   34.615927] =====>rtl8192_set_chan()====ch:7
[   34.727826] =====>rtl8192_set_chan()====ch:8
[   34.839761] =====>rtl8192_set_chan()====ch:9
[   34.951712] =====>rtl8192_set_chan()====ch:10
[   35.063637] =====>rtl8192_set_chan()====ch:11
[   35.175609] =====>rtl8192_set_chan()====ch:12
[   35.287789] =====>rtl8192_set_chan()====ch:13
[   35.400093] ===>rtllib_start_scan()
[   35.400102] =====>rtl8192_set_chan()====ch:3
[   35.410153] Linking with elif,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
[   35.410182] Linking with elif,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
[   35.410600] ===>rtllib_associate_procedure_wq(), chan:6
[   35.410603] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   35.410606] =====>rtl8192_set_chan()====ch:6
[   35.422551] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   35.427173] Associated successfully
[   35.427178] normal associate
[   35.427188] Using G rates:108
[   35.427192] Successfully associated, ht not enabled(0, 0)
[   35.427199] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   35.427203] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   35.428433] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   35.431525] RX: IEEE802.1X EAPOL frame!
[   35.439857] RX: IEEE802.1X EAPOL frame!
[   35.561369] dis associate packet!
[   35.561526] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   40.690490] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   40.690520] =====>rtl8192_set_chan()====ch:1
[   40.804276] =====>rtl8192_set_chan()====ch:2
[   40.916193] =====>rtl8192_set_chan()====ch:3
[   41.028121] =====>rtl8192_set_chan()====ch:4
[   41.140041] =====>rtl8192_set_chan()====ch:5
[   41.251974] =====>rtl8192_set_chan()====ch:6
[   41.363918] =====>rtl8192_set_chan()====ch:7
[   41.475835] =====>rtl8192_set_chan()====ch:8
[   41.587767] =====>rtl8192_set_chan()====ch:9
[   41.699695] =====>rtl8192_set_chan()====ch:10
[   41.811679] =====>rtl8192_set_chan()====ch:11
[   41.923566] =====>rtl8192_set_chan()====ch:12
[   42.035534] =====>rtl8192_set_chan()====ch:13
[   42.147800] ===>rtllib_start_scan()
[   42.147809] =====>rtl8192_set_chan()====ch:7
[   42.157762] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   42.157786] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   42.158024] ===>rtllib_associate_procedure_wq(), chan:6
[   42.158027] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   42.158029] =====>rtl8192_set_chan()====ch:6
[   42.169837] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   42.174271] Associated successfully
[   42.174276] normal associate
[   42.174286] Using G rates:108
[   42.174289] Successfully associated, ht not enabled(0, 0)
[   42.174294] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   42.174301] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   42.178887] RX: IEEE802.1X EAPOL frame!
[   42.187171] RX: IEEE802.1X EAPOL frame!
[   42.187374] dis associate packet!
[   42.187386] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   46.284945] wlan0: no IPv6 routers present
[   47.314161] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   47.314205] =====>rtl8192_set_chan()====ch:1
[   47.424289] =====>rtl8192_set_chan()====ch:2
[   47.536337] =====>rtl8192_set_chan()====ch:3
[   47.648156] =====>rtl8192_set_chan()====ch:4
[   47.760089] =====>rtl8192_set_chan()====ch:5
[   47.872023] =====>rtl8192_set_chan()====ch:6
[   47.983956] =====>rtl8192_set_chan()====ch:7
[   48.095888] =====>rtl8192_set_chan()====ch:8
[   48.207821] =====>rtl8192_set_chan()====ch:9
[   48.319764] =====>rtl8192_set_chan()====ch:10
[   48.431671] =====>rtl8192_set_chan()====ch:11
[   48.543556] =====>rtl8192_set_chan()====ch:12
[   48.655552] =====>rtl8192_set_chan()====ch:13
[   48.768031] ===>rtllib_start_scan()
[   48.768042] =====>rtl8192_set_chan()====ch:7
[   48.777993] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   48.778012] ===>rtllib_associate_procedure_wq(), chan:6
[   48.778015] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   48.778017] =====>rtl8192_set_chan()====ch:6
[   48.787985] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   48.788267] ===>rtllib_associate_procedure_wq(), chan:6
[   48.788270] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   48.788272] =====>rtl8192_set_chan()====ch:6
[   48.800027] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   48.804616] Associated successfully
[   48.804619] normal associate
[   48.804627] Using G rates:108
[   48.804629] Successfully associated, ht not enabled(0, 0)
[   48.804632] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   48.804638] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   48.808933] RX: IEEE802.1X EAPOL frame!
[   48.817296] RX: IEEE802.1X EAPOL frame!
[   48.817450] dis associate packet!
[   48.817560] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   53.946818] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   53.946849] =====>rtl8192_set_chan()====ch:1
[   54.060318] =====>rtl8192_set_chan()====ch:2
[   54.172207] =====>rtl8192_set_chan()====ch:3
[   54.284184] =====>rtl8192_set_chan()====ch:4
[   54.396115] =====>rtl8192_set_chan()====ch:5
[   54.508050] =====>rtl8192_set_chan()====ch:6
[   54.619988] =====>rtl8192_set_chan()====ch:7
[   54.731918] =====>rtl8192_set_chan()====ch:8
[   54.843850] =====>rtl8192_set_chan()====ch:9
[   54.955806] =====>rtl8192_set_chan()====ch:10
[   55.067717] =====>rtl8192_set_chan()====ch:11
[   55.179585] =====>rtl8192_set_chan()====ch:12
[   55.291589] =====>rtl8192_set_chan()====ch:13
[   55.404158] ===>rtllib_start_scan()
[   55.404172] =====>rtl8192_set_chan()====ch:7
[   55.414179] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   55.414196] ===>rtllib_associate_procedure_wq(), chan:6
[   55.414203] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   55.414208] =====>rtl8192_set_chan()====ch:6
[   55.424250] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   55.424585] ===>rtllib_associate_procedure_wq(), chan:6
[   55.424588] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   55.424590] =====>rtl8192_set_chan()====ch:6
[   55.436674] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   55.441155] Associated successfully
[   55.441158] normal associate
[   55.441166] Using G rates:108
[   55.441168] Successfully associated, ht not enabled(0, 0)
[   55.441170] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   55.441173] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   55.445468] RX: IEEE802.1X EAPOL frame!
[   55.453896] RX: IEEE802.1X EAPOL frame!
[   55.454068] dis associate packet!
[   55.454173] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   60.583058] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   60.583093] =====>rtl8192_set_chan()====ch:1
[   60.696346] =====>rtl8192_set_chan()====ch:2
[   60.808278] =====>rtl8192_set_chan()====ch:3
[   60.920191] =====>rtl8192_set_chan()====ch:4
[   61.032149] =====>rtl8192_set_chan()====ch:5
[   61.144084] =====>rtl8192_set_chan()====ch:6
[   61.256015] =====>rtl8192_set_chan()====ch:7
[   61.367960] =====>rtl8192_set_chan()====ch:8
[   61.479880] =====>rtl8192_set_chan()====ch:9
[   61.591828] =====>rtl8192_set_chan()====ch:10
[   61.703743] =====>rtl8192_set_chan()====ch:11
[   61.815689] =====>rtl8192_set_chan()====ch:12
[   61.927568] =====>rtl8192_set_chan()====ch:13
[   62.040112] ===>rtllib_start_scan()
[   62.040125] =====>rtl8192_set_chan()====ch:7
[   62.050096] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   62.050124] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   62.050236] ===>rtllib_associate_procedure_wq(), chan:6
[   62.050239] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   62.050241] =====>rtl8192_set_chan()====ch:6
[   62.062056] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   62.067622] Associated successfully
[   62.067625] normal associate
[   62.067632] Using G rates:108
[   62.067635] Successfully associated, ht not enabled(0, 0)
[   62.067638] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   62.067647] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   62.072582] RX: IEEE802.1X EAPOL frame!
[   62.081386] RX: IEEE802.1X EAPOL frame!
[   62.081538] dis associate packet!
[   62.081649] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   67.208191] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   67.208229] =====>rtl8192_set_chan()====ch:1
[   67.320390] =====>rtl8192_set_chan()====ch:2
[   67.432318] =====>rtl8192_set_chan()====ch:3
[   67.544248] =====>rtl8192_set_chan()====ch:4
[   67.656181] =====>rtl8192_set_chan()====ch:5
[   67.768113] =====>rtl8192_set_chan()====ch:6
[   67.880092] =====>rtl8192_set_chan()====ch:7
[   67.991992] =====>rtl8192_set_chan()====ch:8
[   68.103919] =====>rtl8192_set_chan()====ch:9
[   68.215848] =====>rtl8192_set_chan()====ch:10
[   68.327789] =====>rtl8192_set_chan()====ch:11
[   68.439709] =====>rtl8192_set_chan()====ch:12
[   68.551644] =====>rtl8192_set_chan()====ch:13
[   68.663982] ===>rtllib_start_scan()
[   68.663995] =====>rtl8192_set_chan()====ch:7
[   68.673948] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   68.673988] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   68.674321] ===>rtllib_associate_procedure_wq(), chan:6
[   68.674325] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.674327] =====>rtl8192_set_chan()====ch:6
[   68.686181] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.690599] Associated successfully
[   68.690603] normal associate
[   68.690610] Using G rates:108
[   68.690612] Successfully associated, ht not enabled(0, 0)
[   68.690616] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   68.690621] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   68.697912] RX: IEEE802.1X EAPOL frame!
[   68.706082] RX: IEEE802.1X EAPOL frame!
[   68.706236] dis associate packet!
[   68.706344] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   73.835536] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   73.835573] =====>rtl8192_set_chan()====ch:1
[   73.948411] =====>rtl8192_set_chan()====ch:2
[   74.060350] =====>rtl8192_set_chan()====ch:3
[   74.172278] =====>rtl8192_set_chan()====ch:4
[   74.284242] =====>rtl8192_set_chan()====ch:5
[   74.396144] =====>rtl8192_set_chan()====ch:6
[   74.508077] =====>rtl8192_set_chan()====ch:7
[   74.620065] =====>rtl8192_set_chan()====ch:8
[   74.731959] =====>rtl8192_set_chan()====ch:9
[   74.843914] =====>rtl8192_set_chan()====ch:10
[   74.955817] =====>rtl8192_set_chan()====ch:11
[   75.067759] =====>rtl8192_set_chan()====ch:12
[   75.179678] =====>rtl8192_set_chan()====ch:13
[   75.292133] ===>rtllib_start_scan()
[   75.292143] =====>rtl8192_set_chan()====ch:7
[   75.302149] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   75.302169] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   75.302604] ===>rtllib_associate_procedure_wq(), chan:6
[   75.302607] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   75.302609] =====>rtl8192_set_chan()====ch:6
[   75.314750] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   75.319315] Associated successfully
[   75.319320] normal associate
[   75.319333] Using G rates:108
[   75.319335] Successfully associated, ht not enabled(0, 0)
[   75.319337] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   75.319341] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   75.323652] RX: IEEE802.1X EAPOL frame!
[   75.332021] RX: IEEE802.1X EAPOL frame!
[   75.332191] dis associate packet!
[   75.332299] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   80.461120] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   80.461155] =====>rtl8192_set_chan()====ch:1
[   80.572444] =====>rtl8192_set_chan()====ch:2
[   80.684388] =====>rtl8192_set_chan()====ch:3
[   80.796319] =====>rtl8192_set_chan()====ch:4
[   80.908264] =====>rtl8192_set_chan()====ch:5
[   81.020189] =====>rtl8192_set_chan()====ch:6
[   81.132127] =====>rtl8192_set_chan()====ch:7
[   81.244047] =====>rtl8192_set_chan()====ch:8
[   81.356041] =====>rtl8192_set_chan()====ch:9
[   81.467933] =====>rtl8192_set_chan()====ch:10
[   81.579878] =====>rtl8192_set_chan()====ch:11
[   81.691799] =====>rtl8192_set_chan()====ch:12
[   81.803730] =====>rtl8192_set_chan()====ch:13
[   81.916076] ===>rtllib_start_scan()
[   81.916087] =====>rtl8192_set_chan()====ch:7
[   81.926054] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   81.926083] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   81.926449] ===>rtllib_associate_procedure_wq(), chan:6
[   81.926452] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   81.926455] =====>rtl8192_set_chan()====ch:6
[   81.938258] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.942767] Associated successfully
[   81.942770] normal associate
[   81.942776] Using G rates:108
[   81.942779] Successfully associated, ht not enabled(0, 0)
[   81.942782] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   81.942787] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   81.947050] RX: IEEE802.1X EAPOL frame!
[   81.955347] RX: IEEE802.1X EAPOL frame!
[   81.955484] dis associate packet!
[   81.955636] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   87.082035] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   87.082066] =====>rtl8192_set_chan()====ch:1
[   87.192483] =====>rtl8192_set_chan()====ch:2
[   87.304445] =====>rtl8192_set_chan()====ch:3
[   87.416363] =====>rtl8192_set_chan()====ch:4
[   87.528301] =====>rtl8192_set_chan()====ch:5
[   87.640237] =====>rtl8192_set_chan()====ch:6
[   87.752165] =====>rtl8192_set_chan()====ch:7
[   87.864103] =====>rtl8192_set_chan()====ch:8
[   87.976029] =====>rtl8192_set_chan()====ch:9
[   88.087989] =====>rtl8192_set_chan()====ch:10
[   88.199929] =====>rtl8192_set_chan()====ch:11
[   88.311854] =====>rtl8192_set_chan()====ch:12
[   88.423772] =====>rtl8192_set_chan()====ch:13
[   88.536229] ===>rtllib_start_scan()
[   88.536245] =====>rtl8192_set_chan()====ch:7
[   88.546233] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   88.546261] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   88.546727] ===>rtllib_associate_procedure_wq(), chan:6
[   88.546730] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   88.546733] =====>rtl8192_set_chan()====ch:6
[   88.558888] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   88.563329] Associated successfully
[   88.563333] normal associate
[   88.563339] Using G rates:108
[   88.563342] Successfully associated, ht not enabled(0, 0)
[   88.563345] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   88.563350] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   88.567861] RX: IEEE802.1X EAPOL frame!
[   88.577014] RX: IEEE802.1X EAPOL frame!
[   88.577182] dis associate packet!
[   88.577342] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   93.705000] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   93.705042] =====>rtl8192_set_chan()====ch:1
[   93.816574] =====>rtl8192_set_chan()====ch:2
[   93.928408] =====>rtl8192_set_chan()====ch:3
[   94.040390] =====>rtl8192_set_chan()====ch:4
[   94.152319] =====>rtl8192_set_chan()====ch:5
[   94.264239] =====>rtl8192_set_chan()====ch:6
[   94.376175] =====>rtl8192_set_chan()====ch:7
[   94.488076] =====>rtl8192_set_chan()====ch:8
[   94.600167] =====>rtl8192_set_chan()====ch:9
[   94.712024] =====>rtl8192_set_chan()====ch:10
[   94.823914] =====>rtl8192_set_chan()====ch:11
[   94.935841] =====>rtl8192_set_chan()====ch:12
[   95.047731] =====>rtl8192_set_chan()====ch:13

dmesg | tail

Kod Seç Genişlet

[   94.040390] =====>rtl8192_set_chan()====ch:4
[   94.152319] =====>rtl8192_set_chan()====ch:5
[   94.264239] =====>rtl8192_set_chan()====ch:6
[   94.376175] =====>rtl8192_set_chan()====ch:7
[   94.488076] =====>rtl8192_set_chan()====ch:8
[   94.600167] =====>rtl8192_set_chan()====ch:9
[   94.712024] =====>rtl8192_set_chan()====ch:10
[   94.823914] =====>rtl8192_set_chan()====ch:11
[   94.935841] =====>rtl8192_set_chan()====ch:12
[   95.047731] =====>rtl8192_set_chan()====ch:13

Bağlanamadıktan sonra da:
dmesg

Kod Seç Genişlet

pparmor_parser"
[   24.137238] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   24.137245] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   24.137247] [drm] Driver supports precise vblank timestamp query.
[   24.189210] input: HP WMI hotkeys as /devices/virtual/input/input7
[   24.228215] [fglrx] Maximum main memory to use for locked dma buffers: 2743 MBytes.
[   24.228472] [fglrx]   vendor: 1002 device: 68e0 count: 1
[   24.228904] [fglrx] ioport: bar 4, base 0x5000, size: 0x100
[   24.228916] pci 0000:01:00.0: power state changed by ACPI to D0
[   24.228920] pci 0000:01:00.0: power state changed by ACPI to D0
[   24.228925] pci 0000:01:00.0: enabling device (0006 -> 0007)
[   24.228933] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   24.228938] pci 0000:01:00.0: setting latency timer to 64
[   24.229152] [fglrx] Kernel PAT support is enabled
[   24.229170] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
[   24.279740] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   24.279745] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   24.319858] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   24.319862] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319865] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   24.319868] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319871] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   24.319873] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319876] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   24.319879] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319881] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   24.319884] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319886] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   24.319889] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319891] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   24.319894] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319896] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   24.319899] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319901] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   24.319904] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319906] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   24.319909] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319911] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   24.319914] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319916] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   24.319919] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319922] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   24.319924] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319927] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   24.319929] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   24.319933] cfg80211: World regulatory domain updated:
[   24.319934] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.319937] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.319940] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.319943] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   24.319945] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.319948] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.353796] fbcon: inteldrmfb (fb0) is primary device
[   24.354628] Console: switching to colour frame buffer device 170x48
[   24.354660] fb0: inteldrmfb frame buffer device
[   24.354662] drm: registered panic notifier
[   24.355084] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   24.374981] psmouse serio1: ID: 10 00 64
[   24.415895] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   24.415901] ===>rtllib_start_scan()
[   24.415950] =====>rtl8192_set_chan()====ch:2
[   24.416139] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.427040] r8169 0000:04:00.0: eth0: link down
[   24.427208] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.435345] acpi device:02: registered as cooling_device6
[   24.439076] acpi device:03: registered as cooling_device7
[   24.439943] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   24.440219] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   24.443478] acpi device:0d: registered as cooling_device8
[   24.444103] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input9
[   24.444240] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   24.444931] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   24.450929] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[   24.451013] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   24.451047] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   24.464773] =====>rtl8192_set_chan()====ch:1
[   24.503412] hda_codec: ALC272: BIOS auto-probing.
[   24.510553] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   24.510668] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   24.510912] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   24.510974] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[   24.510995] HDA Intel 0000:01:00.1: setting latency timer to 64
[   24.525989] hda-intel: Enable sync_write for AMD chipset
[   24.545328] usbcore: registered new interface driver ath3k
[   24.578830] =====>rtl8192_set_chan()====ch:2
[   24.689865] =====>rtl8192_set_chan()====ch:3
[   24.715640] usb 1-1.3: USB disconnect, address 3
[   24.743407] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 4
[   24.801769] =====>rtl8192_set_chan()====ch:4
[   24.913710] =====>rtl8192_set_chan()====ch:5
[   25.027884] =====>rtl8192_set_chan()====ch:6
[   25.145642] =====>rtl8192_set_chan()====ch:7
[   25.257535] =====>rtl8192_set_chan()====ch:8
[   25.369478] =====>rtl8192_set_chan()====ch:9
[   25.428498] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input12
[   25.481474] =====>rtl8192_set_chan()====ch:10
[   25.593347] =====>rtl8192_set_chan()====ch:11
[   25.705321] =====>rtl8192_set_chan()====ch:12
[   25.821233] =====>rtl8192_set_chan()====ch:13
[   25.936568] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   25.937060] =====>rtl8192_set_chan()====ch:1
[   25.947178] usb 1-1.3: new full speed USB device using ehci_hcd and address 4
[   26.040844] ppdev: user-space parallel port driver
[   26.049024] =====>rtl8192_set_chan()====ch:2
[   26.056886] Bluetooth: Core ver 2.15
[   26.056910] NET: Registered protocol family 31
[   26.056911] Bluetooth: HCI device and connection manager initialized
[   26.056913] Bluetooth: HCI socket layer initialized
[   26.059304] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   26.060252] usbcore: registered new interface driver btusb
[   26.074753] Bluetooth: L2CAP ver 2.15
[   26.074756] Bluetooth: L2CAP socket layer initialized
[   26.083359] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.083363] Bluetooth: BNEP filters: protocol multicast
[   26.087508] Bluetooth: SCO (Voice Link) ver 0.6
[   26.087511] Bluetooth: SCO socket layer initialized
[   26.161061] =====>rtl8192_set_chan()====ch:3
[   26.272911] =====>rtl8192_set_chan()====ch:4
[   26.384826] =====>rtl8192_set_chan()====ch:5
[   26.496788] =====>rtl8192_set_chan()====ch:6
[   26.608754] =====>rtl8192_set_chan()====ch:7
[   26.720699] =====>rtl8192_set_chan()====ch:8
[   26.832554] =====>rtl8192_set_chan()====ch:9
[   26.944569] =====>rtl8192_set_chan()====ch:10
[   27.053680] Bluetooth: RFCOMM TTY layer initialized
[   27.053686] Bluetooth: RFCOMM socket layer initialized
[   27.053688] Bluetooth: RFCOMM ver 1.11
[   27.056434] =====>rtl8192_set_chan()====ch:11
[   27.168591] =====>rtl8192_set_chan()====ch:12
[   27.280335] =====>rtl8192_set_chan()====ch:13
[   27.392438] ===>rtllib_wx_set_power(): power disable
[   27.493229] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   29.119812] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   31.904323] show_signal_msg: 24 callbacks suppressed
[   31.904327] unity_support_t[1455]: segfault at 4 ip 00dc7824 sp bf9070b0 error 4 in libGL.so.1.2[d4e000+c9000]
[   33.942838] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   33.942875] =====>rtl8192_set_chan()====ch:1
[   34.056277] =====>rtl8192_set_chan()====ch:2
[   34.168256] =====>rtl8192_set_chan()====ch:3
[   34.280105] =====>rtl8192_set_chan()====ch:4
[   34.392033] =====>rtl8192_set_chan()====ch:5
[   34.505303] =====>rtl8192_set_chan()====ch:6
[   34.615927] =====>rtl8192_set_chan()====ch:7
[   34.727826] =====>rtl8192_set_chan()====ch:8
[   34.839761] =====>rtl8192_set_chan()====ch:9
[   34.951712] =====>rtl8192_set_chan()====ch:10
[   35.063637] =====>rtl8192_set_chan()====ch:11
[   35.175609] =====>rtl8192_set_chan()====ch:12
[   35.287789] =====>rtl8192_set_chan()====ch:13
[   35.400093] ===>rtllib_start_scan()
[   35.400102] =====>rtl8192_set_chan()====ch:3
[   35.410153] Linking with elif,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
[   35.410182] Linking with elif,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406
[   35.410600] ===>rtllib_associate_procedure_wq(), chan:6
[   35.410603] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   35.410606] =====>rtl8192_set_chan()====ch:6
[   35.422551] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   35.427173] Associated successfully
[   35.427178] normal associate
[   35.427188] Using G rates:108
[   35.427192] Successfully associated, ht not enabled(0, 0)
[   35.427199] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   35.427203] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   35.428433] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   35.431525] RX: IEEE802.1X EAPOL frame!
[   35.439857] RX: IEEE802.1X EAPOL frame!
[   35.561369] dis associate packet!
[   35.561526] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   40.690490] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   40.690520] =====>rtl8192_set_chan()====ch:1
[   40.804276] =====>rtl8192_set_chan()====ch:2
[   40.916193] =====>rtl8192_set_chan()====ch:3
[   41.028121] =====>rtl8192_set_chan()====ch:4
[   41.140041] =====>rtl8192_set_chan()====ch:5
[   41.251974] =====>rtl8192_set_chan()====ch:6
[   41.363918] =====>rtl8192_set_chan()====ch:7
[   41.475835] =====>rtl8192_set_chan()====ch:8
[   41.587767] =====>rtl8192_set_chan()====ch:9
[   41.699695] =====>rtl8192_set_chan()====ch:10
[   41.811679] =====>rtl8192_set_chan()====ch:11
[   41.923566] =====>rtl8192_set_chan()====ch:12
[   42.035534] =====>rtl8192_set_chan()====ch:13
[   42.147800] ===>rtllib_start_scan()
[   42.147809] =====>rtl8192_set_chan()====ch:7
[   42.157762] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   42.157786] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   42.158024] ===>rtllib_associate_procedure_wq(), chan:6
[   42.158027] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   42.158029] =====>rtl8192_set_chan()====ch:6
[   42.169837] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   42.174271] Associated successfully
[   42.174276] normal associate
[   42.174286] Using G rates:108
[   42.174289] Successfully associated, ht not enabled(0, 0)
[   42.174294] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   42.174301] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   42.178887] RX: IEEE802.1X EAPOL frame!
[   42.187171] RX: IEEE802.1X EAPOL frame!
[   42.187374] dis associate packet!
[   42.187386] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   46.284945] wlan0: no IPv6 routers present
[   47.314161] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   47.314205] =====>rtl8192_set_chan()====ch:1
[   47.424289] =====>rtl8192_set_chan()====ch:2
[   47.536337] =====>rtl8192_set_chan()====ch:3
[   47.648156] =====>rtl8192_set_chan()====ch:4
[   47.760089] =====>rtl8192_set_chan()====ch:5
[   47.872023] =====>rtl8192_set_chan()====ch:6
[   47.983956] =====>rtl8192_set_chan()====ch:7
[   48.095888] =====>rtl8192_set_chan()====ch:8
[   48.207821] =====>rtl8192_set_chan()====ch:9
[   48.319764] =====>rtl8192_set_chan()====ch:10
[   48.431671] =====>rtl8192_set_chan()====ch:11
[   48.543556] =====>rtl8192_set_chan()====ch:12
[   48.655552] =====>rtl8192_set_chan()====ch:13
[   48.768031] ===>rtllib_start_scan()
[   48.768042] =====>rtl8192_set_chan()====ch:7
[   48.777993] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   48.778012] ===>rtllib_associate_procedure_wq(), chan:6
[   48.778015] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   48.778017] =====>rtl8192_set_chan()====ch:6
[   48.787985] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   48.788267] ===>rtllib_associate_procedure_wq(), chan:6
[   48.788270] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   48.788272] =====>rtl8192_set_chan()====ch:6
[   48.800027] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   48.804616] Associated successfully
[   48.804619] normal associate
[   48.804627] Using G rates:108
[   48.804629] Successfully associated, ht not enabled(0, 0)
[   48.804632] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   48.804638] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   48.808933] RX: IEEE802.1X EAPOL frame!
[   48.817296] RX: IEEE802.1X EAPOL frame!
[   48.817450] dis associate packet!
[   48.817560] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   53.946818] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   53.946849] =====>rtl8192_set_chan()====ch:1
[   54.060318] =====>rtl8192_set_chan()====ch:2
[   54.172207] =====>rtl8192_set_chan()====ch:3
[   54.284184] =====>rtl8192_set_chan()====ch:4
[   54.396115] =====>rtl8192_set_chan()====ch:5
[   54.508050] =====>rtl8192_set_chan()====ch:6
[   54.619988] =====>rtl8192_set_chan()====ch:7
[   54.731918] =====>rtl8192_set_chan()====ch:8
[   54.843850] =====>rtl8192_set_chan()====ch:9
[   54.955806] =====>rtl8192_set_chan()====ch:10
[   55.067717] =====>rtl8192_set_chan()====ch:11
[   55.179585] =====>rtl8192_set_chan()====ch:12
[   55.291589] =====>rtl8192_set_chan()====ch:13
[   55.404158] ===>rtllib_start_scan()
[   55.404172] =====>rtl8192_set_chan()====ch:7
[   55.414179] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   55.414196] ===>rtllib_associate_procedure_wq(), chan:6
[   55.414203] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   55.414208] =====>rtl8192_set_chan()====ch:6
[   55.424250] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   55.424585] ===>rtllib_associate_procedure_wq(), chan:6
[   55.424588] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   55.424590] =====>rtl8192_set_chan()====ch:6
[   55.436674] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   55.441155] Associated successfully
[   55.441158] normal associate
[   55.441166] Using G rates:108
[   55.441168] Successfully associated, ht not enabled(0, 0)
[   55.441170] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   55.441173] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   55.445468] RX: IEEE802.1X EAPOL frame!
[   55.453896] RX: IEEE802.1X EAPOL frame!
[   55.454068] dis associate packet!
[   55.454173] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   60.583058] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   60.583093] =====>rtl8192_set_chan()====ch:1
[   60.696346] =====>rtl8192_set_chan()====ch:2
[   60.808278] =====>rtl8192_set_chan()====ch:3
[   60.920191] =====>rtl8192_set_chan()====ch:4
[   61.032149] =====>rtl8192_set_chan()====ch:5
[   61.144084] =====>rtl8192_set_chan()====ch:6
[   61.256015] =====>rtl8192_set_chan()====ch:7
[   61.367960] =====>rtl8192_set_chan()====ch:8
[   61.479880] =====>rtl8192_set_chan()====ch:9
[   61.591828] =====>rtl8192_set_chan()====ch:10
[   61.703743] =====>rtl8192_set_chan()====ch:11
[   61.815689] =====>rtl8192_set_chan()====ch:12
[   61.927568] =====>rtl8192_set_chan()====ch:13
[   62.040112] ===>rtllib_start_scan()
[   62.040125] =====>rtl8192_set_chan()====ch:7
[   62.050096] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   62.050124] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   62.050236] ===>rtllib_associate_procedure_wq(), chan:6
[   62.050239] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   62.050241] =====>rtl8192_set_chan()====ch:6
[   62.062056] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   62.067622] Associated successfully
[   62.067625] normal associate
[   62.067632] Using G rates:108
[   62.067635] Successfully associated, ht not enabled(0, 0)
[   62.067638] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   62.067647] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   62.072582] RX: IEEE802.1X EAPOL frame!
[   62.081386] RX: IEEE802.1X EAPOL frame!
[   62.081538] dis associate packet!
[   62.081649] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   67.208191] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   67.208229] =====>rtl8192_set_chan()====ch:1
[   67.320390] =====>rtl8192_set_chan()====ch:2
[   67.432318] =====>rtl8192_set_chan()====ch:3
[   67.544248] =====>rtl8192_set_chan()====ch:4
[   67.656181] =====>rtl8192_set_chan()====ch:5
[   67.768113] =====>rtl8192_set_chan()====ch:6
[   67.880092] =====>rtl8192_set_chan()====ch:7
[   67.991992] =====>rtl8192_set_chan()====ch:8
[   68.103919] =====>rtl8192_set_chan()====ch:9
[   68.215848] =====>rtl8192_set_chan()====ch:10
[   68.327789] =====>rtl8192_set_chan()====ch:11
[   68.439709] =====>rtl8192_set_chan()====ch:12
[   68.551644] =====>rtl8192_set_chan()====ch:13
[   68.663982] ===>rtllib_start_scan()
[   68.663995] =====>rtl8192_set_chan()====ch:7
[   68.673948] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   68.673988] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   68.674321] ===>rtllib_associate_procedure_wq(), chan:6
[   68.674325] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   68.674327] =====>rtl8192_set_chan()====ch:6
[   68.686181] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   68.690599] Associated successfully
[   68.690603] normal associate
[   68.690610] Using G rates:108
[   68.690612] Successfully associated, ht not enabled(0, 0)
[   68.690616] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   68.690621] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   68.697912] RX: IEEE802.1X EAPOL frame!
[   68.706082] RX: IEEE802.1X EAPOL frame!
[   68.706236] dis associate packet!
[   68.706344] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   73.835536] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   73.835573] =====>rtl8192_set_chan()====ch:1
[   73.948411] =====>rtl8192_set_chan()====ch:2
[   74.060350] =====>rtl8192_set_chan()====ch:3
[   74.172278] =====>rtl8192_set_chan()====ch:4
[   74.284242] =====>rtl8192_set_chan()====ch:5
[   74.396144] =====>rtl8192_set_chan()====ch:6
[   74.508077] =====>rtl8192_set_chan()====ch:7
[   74.620065] =====>rtl8192_set_chan()====ch:8
[   74.731959] =====>rtl8192_set_chan()====ch:9
[   74.843914] =====>rtl8192_set_chan()====ch:10
[   74.955817] =====>rtl8192_set_chan()====ch:11
[   75.067759] =====>rtl8192_set_chan()====ch:12
[   75.179678] =====>rtl8192_set_chan()====ch:13
[   75.292133] ===>rtllib_start_scan()
[   75.292143] =====>rtl8192_set_chan()====ch:7
[   75.302149] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   75.302169] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   75.302604] ===>rtllib_associate_procedure_wq(), chan:6
[   75.302607] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   75.302609] =====>rtl8192_set_chan()====ch:6
[   75.314750] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   75.319315] Associated successfully
[   75.319320] normal associate
[   75.319333] Using G rates:108
[   75.319335] Successfully associated, ht not enabled(0, 0)
[   75.319337] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   75.319341] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   75.323652] RX: IEEE802.1X EAPOL frame!
[   75.332021] RX: IEEE802.1X EAPOL frame!
[   75.332191] dis associate packet!
[   75.332299] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   80.461120] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   80.461155] =====>rtl8192_set_chan()====ch:1
[   80.572444] =====>rtl8192_set_chan()====ch:2
[   80.684388] =====>rtl8192_set_chan()====ch:3
[   80.796319] =====>rtl8192_set_chan()====ch:4
[   80.908264] =====>rtl8192_set_chan()====ch:5
[   81.020189] =====>rtl8192_set_chan()====ch:6
[   81.132127] =====>rtl8192_set_chan()====ch:7
[   81.244047] =====>rtl8192_set_chan()====ch:8
[   81.356041] =====>rtl8192_set_chan()====ch:9
[   81.467933] =====>rtl8192_set_chan()====ch:10
[   81.579878] =====>rtl8192_set_chan()====ch:11
[   81.691799] =====>rtl8192_set_chan()====ch:12
[   81.803730] =====>rtl8192_set_chan()====ch:13
[   81.916076] ===>rtllib_start_scan()
[   81.916087] =====>rtl8192_set_chan()====ch:7
[   81.926054] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   81.926083] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   81.926449] ===>rtllib_associate_procedure_wq(), chan:6
[   81.926452] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   81.926455] =====>rtl8192_set_chan()====ch:6
[   81.938258] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   81.942767] Associated successfully
[   81.942770] normal associate
[   81.942776] Using G rates:108
[   81.942779] Successfully associated, ht not enabled(0, 0)
[   81.942782] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   81.942787] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   81.947050] RX: IEEE802.1X EAPOL frame!
[   81.955347] RX: IEEE802.1X EAPOL frame!
[   81.955484] dis associate packet!
[   81.955636] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   87.082035] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   87.082066] =====>rtl8192_set_chan()====ch:1
[   87.192483] =====>rtl8192_set_chan()====ch:2
[   87.304445] =====>rtl8192_set_chan()====ch:3
[   87.416363] =====>rtl8192_set_chan()====ch:4
[   87.528301] =====>rtl8192_set_chan()====ch:5
[   87.640237] =====>rtl8192_set_chan()====ch:6
[   87.752165] =====>rtl8192_set_chan()====ch:7
[   87.864103] =====>rtl8192_set_chan()====ch:8
[   87.976029] =====>rtl8192_set_chan()====ch:9
[   88.087989] =====>rtl8192_set_chan()====ch:10
[   88.199929] =====>rtl8192_set_chan()====ch:11
[   88.311854] =====>rtl8192_set_chan()====ch:12
[   88.423772] =====>rtl8192_set_chan()====ch:13
[   88.536229] ===>rtllib_start_scan()
[   88.536245] =====>rtl8192_set_chan()====ch:7
[   88.546233] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   88.546261] Linking with elif,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406
[   88.546727] ===>rtllib_associate_procedure_wq(), chan:6
[   88.546730] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   88.546733] =====>rtl8192_set_chan()====ch:6
[   88.558888] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   88.563329] Associated successfully
[   88.563333] normal associate
[   88.563339] Using G rates:108
[   88.563342] Successfully associated, ht not enabled(0, 0)
[   88.563345] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   88.563350] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   88.567861] RX: IEEE802.1X EAPOL frame!
[   88.577014] RX: IEEE802.1X EAPOL frame!
[   88.577182] dis associate packet!
[   88.577342] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   93.705000] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   93.705042] =====>rtl8192_set_chan()====ch:1
[   93.816574] =====>rtl8192_set_chan()====ch:2
[   93.928408] =====>rtl8192_set_chan()====ch:3
[   94.040390] =====>rtl8192_set_chan()====ch:4
[   94.152319] =====>rtl8192_set_chan()====ch:5
[   94.264239] =====>rtl8192_set_chan()====ch:6
[   94.376175] =====>rtl8192_set_chan()====ch:7
[   94.488076] =====>rtl8192_set_chan()====ch:8
[   94.600167] =====>rtl8192_set_chan()====ch:9
[   94.712024] =====>rtl8192_set_chan()====ch:10
[   94.823914] =====>rtl8192_set_chan()====ch:11
[   94.935841] =====>rtl8192_set_chan()====ch:12
[   95.047731] =====>rtl8192_set_chan()====ch:13
[  194.535002] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  194.535052] =====>rtl8192_set_chan()====ch:1
[  194.648199] =====>rtl8192_set_chan()====ch:2
[  194.760130] =====>rtl8192_set_chan()====ch:3
[  194.872028] =====>rtl8192_set_chan()====ch:4
[  194.984000] =====>rtl8192_set_chan()====ch:5
[  195.095933] =====>rtl8192_set_chan()====ch:6
[  195.207894] =====>rtl8192_set_chan()====ch:7
[  195.319749] =====>rtl8192_set_chan()====ch:8
[  195.431700] =====>rtl8192_set_chan()====ch:9
[  195.543645] =====>rtl8192_set_chan()====ch:10
[  195.655592] =====>rtl8192_set_chan()====ch:11
[  195.767539] =====>rtl8192_set_chan()====ch:12
[  195.879461] =====>rtl8192_set_chan()====ch:13
dmesg | tail

Kod Seç Genişlet

[  224.854119] =====>rtl8192_set_chan()====ch:4
[  224.966052] =====>rtl8192_set_chan()====ch:5
[  225.078029] =====>rtl8192_set_chan()====ch:6
[  225.189926] =====>rtl8192_set_chan()====ch:7
[  225.301841] =====>rtl8192_set_chan()====ch:8
[  225.413793] =====>rtl8192_set_chan()====ch:9
[  225.525769] =====>rtl8192_set_chan()====ch:10
[  225.637656] =====>rtl8192_set_chan()====ch:11
[  225.749602] =====>rtl8192_set_chan()====ch:12
[  225.861521] =====>rtl8192_set_chan()====ch:13

Şifreleme türüne baktım, şifreleme türü WPA-2 kişiselmiş

[kalkan1973]

Tuhaf ama ben de sorunlar yaşıyorum.

Bazı meşhur sitelere giremiyorum. Hem çok yavaşlama var.

[if]

@yetuar, atladığımız bir şey var mı diye bakındım genel forumda ve internette. Bu kartla ilgili genel şikayet kararlı çalışmaması. Yani durup dururken bağlantının kesilmesi ve sonra bağlanamaması vs. Fakat senin durumunda diğer kablosuz ağlara bağlanabiliyor, sadece istediğin ağa bağlanamıyor. Elimizdeki verilere göre istediğiniz ağ üzerinden çözüme gitmemiz gerek. Şifreleme türünü değiştirip dener misiniz? Mesela WEP yapınız ve öyle bağlanmaya çalışınız.

@Mustafa Kalkan, aynı kart ve sürücüyü mü kullanıyorsunuz? Sizin sorununuz burada anlatılandan farklı görünüyor. Önce bir araştırma yapmanızı salık veririm ki çözüm bulabilirsiniz. Olmazsa başka bir konuda, hatta aynı kart ve hatayı içeren bir konumuz da vardır, konuşalım.

[bytan]

Eğer kendi ağını şifresiz duruma getirdiğinde bağlanabiliyorsan ve sistemin güncel değilse, kabloyla bağlantı sağlayıp tüm güncellemelerini al. Ancak halen sorun devam ederse, daha güncel sürücüye yönelebilirsin.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/773976

[yetuar]

klasik yöntemlerden biri olan format atma yöntemine girişmeye kalktım ama az önce açtığım başlıktaki gibi hiç bir ağı göremiyorum

[confickerbelasi]

o notebook ne marka ve model? msi vr601-49 daki atheros marka wifi kartı çok ısınınca devreden çıkıyor şifreyi doğru girsende bağlanmıyor uğraşınca bütün ağları kaybediyor bunu pardus+ubuntu ve windows vista+windows xp ilede yapıyordu kardeşimin notebooku şuan onu serin tutmak için notebook soğutucusu yapmıştı onunla kullanıyor ısıları kontrol et kurulumda hata olduysa  bu sorun olabilir.

[yetuar]

o notebook ne marka ve model? msi vr601-49 daki atheros marka wifi kartı çok ısınınca devreden çıkıyor şifreyi doğru girsende bağlanmıyor uğraşınca bütün ağları kaybediyor bunu pardus+ubuntu ve windows vista+windows xp ilede yapıyordu kardeşimin notebooku şuan onu serin tutmak için notebook soğutucusu yapmıştı onunla kullanıyor ısıları kontrol et kurulumda hata olduysa  bu sorun olabilir.

Grundig marka ama bilgisarla ilgili olduğunu düşünmüyorum. Çünkü ubuntu kurulu gayet iyi bilgisayarlardan da bağlanmayı denedik ama olmadı. Başta da söylediğim gibi modemin sahibiyle konuşma ihtimalim "0" olduğu için tekrardan şifreleme yapamıyoruz. Neyse, ev ahalisi olarak kendi internetimizi almayı düşünüyoduk zaten. Hızlandırıcı etken olabilir. O koşulda da sıkıntı olursa yine yazarım

[if]

Konuyla alakasız iletiler silinmiştir.

[BayboraKaan]

An itibari ile ayni sorunu yine yasadim . Her zaman sistemimi yeni baslatigimda evde ki modeme baglanan netbookum tebin yeniden baslatmam gerektigi icin yeniden baslatigimda direk olarak modemim ile baglanmayarak secilebilir aglarin oldugunu söyleyen bildirim ile karsilastim. Baglan dedigim zaman döndü döndü döndü ve baglanmadi

Sonuc kalktim modemi fisten cektim taktim baglandi