Sistem açılışı gün geçtikçe yavaşlıyor, bootchart kaydımı inceleyebilir misiniz?

[aklan]

G, yanıtınız için teşekkürler.

Ben Ubuntu kurduğumdan beri bilgisayarıma herhangi bir donanım eklemedim. Sürücü güncelleştirmeleri otomatik güncelleştirmelerle birlikte geliyorsa sürücü güncelleştirmesi yapmış olabilirim. Güncelleştirmeleri Ubuntu'yu kurduktan sonra birkaç saat içinde yapıyorum; ancak Ubuntu, kurulduktan 2-3 hafta kadar sonra yavaşlamaya başlıyor.

Sizin iletinizden sonra tüm olasılıklara karşı kasanın arkasındaki klavye, fare ve ekran dışındaki tüm kabloları çıkarıp bilgisayarı yeniden başlattım; ancak bir hızlanma göremedim. Bu arada ağ kartım hem PCI'ı, hem de USB'yi destekliyor.

Düzenleme: Noktalama hatası.

Başka yardım edebilecek olan yok mu?

[ulusoyab]

benim sistem açılışı da iyice yavaşladı.
dmesg çıktısı
http://pastebin.com/AhUV54GL
bilg.
işlemci i3 ram: 2 gb grfik : nvidia gt 220

[bytan]

Canlı cd ile sda6 bölümüne fsck yürüt. Sonra eğer sorun devam ederse yeni dmesg çıktına tekrar bakarız.

[ulusoyab]

sda6 ya fsck yürüttüm.
fsck sonucu
http://pastebin.com/dB2EfWwq

yeni dmesg çıktısı.
http://pastebin.com/np7UiEzw

[bytan]

Şu an için açılış süresinin ciddi oranda değişmiş olması gerekiyor.

[ulusoyab]

Evet öncekine göre epey hızlandı. Teşekkürler.
Gerçi yine de bir yerde hiç bir şey yapmadan bir müddet bekliyor. Ama şimdilik sabredeyim. Yeni sürüm çıkınca sıfırdan kurulum gerekecek.

[bytan]

O bekleyen kısım ise bir önceki sayfada aktardığım ureadhead olabilir. Bunu anlamak için de ilgili dosyaya isim değişikliği yapabilirsin.

[ozdemirbrhm]

benim açılış sürem anormal boyutlara ulaştı, çözümü nasıl olabilir?

bootchart çıktısı şu şekilde: http://postimage.org/image/l4fymk5r3/

[bytan]

Tamamlayıcı olarak dmesg çıktısını da aktarırsan iyi olur:

Kod Seç Genişlet

dmesg

[ozdemirbrhm]

dmesg çıktısı şu şekilde:

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-33-generic-pae (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #52-Ubuntu SMP Thu Oct 18 16:39:21 UTC 2012 (Ubuntu 3.2.0-33.52-generic-pae 3.2.31)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007feea000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007feea000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Sony Corporation VGN-FS315M, BIOS R0084J1 06/02/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 2  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 364e8000 - 3726c000
[    0.000000] ACPI: RSDP 000f74f0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 7fee5896 00044 (v01   Sony       J1 20060602 PTL  00000000)
[    0.000000] ACPI: APIC 7fee9e78 00068 (v01   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: FACP 7fee9ee0 00084 (v02   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: DSDT 7fee632b 03B4D (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: FACS 7fefafc0 00040
[    0.000000] ACPI: BOOT 7fee9fd8 00028 (v01   Sony       J1 20060602 PTL  00000001)
[    0.000000] ACPI: MCFG 7fee9f9c 0003C (v01   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: SSDT 7fee6153 001D4 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee5d0e 00235 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee5af3 0021B (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee58da 00219 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1154MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0007fee0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fee0
[    0.000000] On node 0 totalpages: 523887
[    0.000000] free_area_init_node: node 0, pgdat c1869140, node_mem_map f54e8200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2310 pages used for memmap
[    0.000000]   HighMem zone: 293340 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34240 r0 d23104 u57344
[    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519793
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-33-generic-pae root=UUID=68E47309E472D930 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8383744 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007fee0)
[    0.000000] Memory: 2045804k/2096000k available (5821k kernel code, 49744k reserved, 2845k data, 740k init, 1182600k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
[    0.000000]       .data : 0xc15af47c - 0xc1876940   (2845 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15af47c   (5821 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1729.185 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.37 BogoMIPS (lpj=6916740)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004047] Security Framework initialized
[    0.004082] AppArmor: AppArmor initialized
[    0.004085] Yama: becoming mindful.
[    0.004200] Mount-cache hash table entries: 512
[    0.004428] Initializing cgroup subsys cpuacct
[    0.004438] Initializing cgroup subsys memory
[    0.004452] Initializing cgroup subsys devices
[    0.004456] Initializing cgroup subsys freezer
[    0.004459] Initializing cgroup subsys blkio
[    0.004472] Initializing cgroup subsys perf_event
[    0.004509] Disabled fast string operations
[    0.004519] mce: CPU supports 5 MCE banks
[    0.004530] CPU0: Thermal monitoring enabled (TM2)
[    0.004931] SMP alternatives: switching to UP code
[    0.019837] ACPI: Core revision 20110623
[    0.028040] ftrace: allocating 26569 entries in 52 pages
[    0.032078] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075635] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[    0.076004] Performance Events: p6 PMU driver.
[    0.076004] ... version:                0
[    0.076004] ... bit width:              32
[    0.076004] ... generic registers:      2
[    0.076004] ... value mask:             00000000ffffffff
[    0.076004] ... max period:             000000007fffffff
[    0.076004] ... fixed-purpose events:   0
[    0.076004] ... event mask:             0000000000000003
[    0.076004] NMI watchdog enabled, takes one hw-pmu counter.
[    0.076004] Brought up 1 CPUs
[    0.076004] Total of 1 processors activated (3458.37 BogoMIPS).
[    0.076004] devtmpfs: initialized
[    0.076004] EVM: security.selinux
[    0.076004] EVM: security.SMACK64
[    0.076004] EVM: security.capability
[    0.076004] PM: Registering ACPI NVS region at 7feea000 (90112 bytes)
[    0.076004] print_constraints: dummy:
[    0.076004] RTC time: 12:39:03, date: 12/14/12
[    0.076004] NET: Registered protocol family 16
[    0.076004] EISA bus registered
[    0.076004] ACPI: bus type pci registered
[    0.076004] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.076004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.076004] PCI: Using MMCONFIG for extended config space
[    0.076004] PCI: Using configuration type 1 for base access
[    0.077680] bio: create slab <bio-0> at 0
[    0.077795] ACPI: Added _OSI(Module Device)
[    0.077799] ACPI: Added _OSI(Processor Device)
[    0.077802] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.077805] ACPI: Added _OSI(Processor Aggregator Device)
[    0.079122] ACPI: EC: Look up EC in DSDT
[    0.180067] ACPI: Interpreter enabled
[    0.180078] ACPI: (supports S0 S3 S4 S5)
[    0.180105] ACPI: Using IOAPIC for interrupt routing
[    0.185744] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.185913] ACPI: No dock devices found.
[    0.185916] HEST: Table not found.
[    0.185922] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.186333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.187153] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.187157] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.187161] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.187165] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.187169] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.187173] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.187177] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[    0.187192] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[    0.187248] pci 0000:00:01.0: [8086:2591] type 1 class 0x000604
[    0.187298] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.187303] pci 0000:00:01.0: PME# disabled
[    0.187370] pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403
[    0.187395] pci 0000:00:1b.0: reg 10: [mem 0x80000000-0x80003fff 64bit]
[    0.187503] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.187509] pci 0000:00:1b.0: PME# disabled
[    0.187536] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[    0.187595] pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
[    0.187640] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[    0.187699] pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
[    0.187744] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[    0.187804] pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
[    0.187848] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
[    0.187907] pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
[    0.187964] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[    0.187989] pci 0000:00:1d.7: reg 10: [mem 0x80004000-0x800043ff]
[    0.188105] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.188112] pci 0000:00:1d.7: PME# disabled
[    0.188136] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.188231] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[    0.188344] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.188355] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.188362] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.188390] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
[    0.188409] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.188422] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.188436] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.188449] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.188462] pci 0000:00:1f.1: reg 20: [io  0x1880-0x188f]
[    0.188512] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
[    0.188588] pci 0000:00:1f.3: reg 20: [io  0x18a0-0x18bf]
[    0.188690] pci 0000:01:00.0: [10de:0168] type 0 class 0x000300
[    0.188708] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xa0ffffff]
[    0.188726] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.188745] pci 0000:01:00.0: reg 1c: [mem 0x90000000-0x90ffffff 64bit]
[    0.188767] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.188838] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.188850] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.188856] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xafffffff]
[    0.188861] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.188920] pci 0000:06:03.0: [104c:ac8e] type 2 class 0x000607
[    0.188952] pci 0000:06:03.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.189006] pci 0000:06:03.0: supports D1 D2
[    0.189009] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189016] pci 0000:06:03.0: PME# disabled
[    0.189051] pci 0000:06:03.2: [104c:802e] type 0 class 0x000c00
[    0.189083] pci 0000:06:03.2: reg 10: [mem 0xb0004000-0xb00047ff]
[    0.189102] pci 0000:06:03.2: reg 14: [mem 0xb0000000-0xb0003fff]
[    0.189233] pci 0000:06:03.2: supports D1 D2
[    0.189236] pci 0000:06:03.2: PME# supported from D0 D1 D2 D3hot
[    0.189243] pci 0000:06:03.2: PME# disabled
[    0.189272] pci 0000:06:03.3: [104c:ac8f] type 0 class 0x000180
[    0.189304] pci 0000:06:03.3: reg 10: [mem 0xb0005000-0xb0005fff]
[    0.189449] pci 0000:06:03.3: supports D1 D2
[    0.189452] pci 0000:06:03.3: PME# supported from D0 D1 D2 D3hot
[    0.189459] pci 0000:06:03.3: PME# disabled
[    0.189498] pci 0000:06:04.0: [8086:4220] type 0 class 0x000280
[    0.189530] pci 0000:06:04.0: reg 10: [mem 0xb0006000-0xb0006fff]
[    0.189676] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
[    0.189683] pci 0000:06:04.0: PME# disabled
[    0.189719] pci 0000:06:08.0: [8086:1068] type 0 class 0x000200
[    0.189751] pci 0000:06:08.0: reg 10: [mem 0xb0007000-0xb0007fff]
[    0.189769] pci 0000:06:08.0: reg 14: [io  0x2000-0x203f]
[    0.189895] pci 0000:06:08.0: supports D1 D2
[    0.189898] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189905] pci 0000:06:08.0: PME# disabled
[    0.189969] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[    0.189975] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.189981] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.189991] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.189994] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.190061] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[    0.190078] pci_bus 0000:00: on NUMA node 0
[    0.190082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.190323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.190433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.190574]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.190578]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.190581] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.194656] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.194729] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[    0.194798] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.194867] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.194936] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.195004] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.195074] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.195144] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.195321] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.195329] vgaarb: loaded
[    0.195331] vgaarb: bridge control possible 0000:01:00.0
[    0.195506] i2c-core: driver [aat2870] using legacy suspend method
[    0.195509] i2c-core: driver [aat2870] using legacy resume method
[    0.195620] SCSI subsystem initialized
[    0.195669] libata version 3.00 loaded.
[    0.195735] usbcore: registered new interface driver usbfs
[    0.195753] usbcore: registered new interface driver hub
[    0.195787] usbcore: registered new device driver usb
[    0.195915] PCI: Using ACPI for IRQ routing
[    0.206231] PCI: pci_cache_line_size set to 64 bytes
[    0.206330] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.206333] reserve RAM buffer: 000000007fee0000 - 000000007fffffff
[    0.206483] NetLabel: Initializing
[    0.206485] NetLabel:  domain hash size = 128
[    0.206487] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.206502] NetLabel:  unlabeled traffic allowed by default
[    0.206697] hpet clockevent registered
[    0.206702] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.206710] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.206717] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.212058] Switching to clocksource hpet
[    0.224296] AppArmor: AppArmor Filesystem Enabled
[    0.224352] pnp: PnP ACPI init
[    0.224388] ACPI: bus type pnp registered
[    0.225486] pnp 00:00: [bus 00-ff]
[    0.225492] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.225495] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.225499] pnp 00:00: [io  0x0d00-0xffff window]
[    0.225502] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.225506] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.225509] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.225512] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.225516] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.225519] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.225523] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.225526] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.225529] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.225533] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.225536] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.225539] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.225543] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.225546] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.225550] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.225643] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.225885] pnp 00:01: [io  0x0000-0x001f]
[    0.225888] pnp 00:01: [io  0x0081-0x0091]
[    0.225891] pnp 00:01: [io  0x0093-0x009f]
[    0.225894] pnp 00:01: [io  0x00c0-0x00df]
[    0.225898] pnp 00:01: [dma 4]
[    0.225960] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.225974] pnp 00:02: [mem 0xff800000-0xffffffff]
[    0.226028] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.226076] pnp 00:03: [io  0x00f0]
[    0.226100] pnp 00:03: [irq 13]
[    0.226158] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.226192] pnp 00:04: [io  0x0061]
[    0.226195] pnp 00:04: [io  0x0063]
[    0.226198] pnp 00:04: [io  0x0065]
[    0.226201] pnp 00:04: [io  0x0067]
[    0.226203] pnp 00:04: [io  0x0070]
[    0.226206] pnp 00:04: [io  0x0080]
[    0.226209] pnp 00:04: [io  0x0092]
[    0.226212] pnp 00:04: [io  0x00b2-0x00b3]
[    0.226215] pnp 00:04: [io  0x0380-0x0383]
[    0.226218] pnp 00:04: [io  0x0800-0x080f]
[    0.226221] pnp 00:04: [io  0x1000-0x107f]
[    0.226224] pnp 00:04: [io  0x1180-0x11bf]
[    0.226226] pnp 00:04: [io  0x1640-0x164f]
[    0.226229] pnp 00:04: [io  0xfe00-0xfe7f]
[    0.226232] pnp 00:04: [io  0xfe80-0xfeff]
[    0.226235] pnp 00:04: [mem 0xf0008000-0xf000bfff]
[    0.226239] pnp 00:04: [mem 0xf0000000-0xf0003fff]
[    0.226242] pnp 00:04: [mem 0xf0005000-0xf0005fff]
[    0.226245] pnp 00:04: [mem 0xf0004000-0xf0004fff]
[    0.226248] pnp 00:04: [mem 0xe0000000-0xefffffff]
[    0.226367] system 00:04: [io  0x0380-0x0383] has been reserved
[    0.226371] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.226375] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.226379] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.226383] system 00:04: [io  0x1640-0x164f] has been reserved
[    0.226387] system 00:04: [io  0xfe00-0xfe7f] has been reserved
[    0.226391] system 00:04: [io  0xfe80-0xfeff] has been reserved
[    0.226396] system 00:04: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.226400] system 00:04: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.226404] system 00:04: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.226409] system 00:04: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.226413] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.226418] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.226449] pnp 00:05: [io  0x0070-0x0077]
[    0.226507] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.226526] pnp 00:06: [io  0x0060]
[    0.226529] pnp 00:06: [io  0x0064]
[    0.226538] pnp 00:06: [irq 1]
[    0.226601] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.226618] pnp 00:07: [irq 12]
[    0.226677] pnp 00:07: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.226705] pnp: PnP ACPI: found 8 devices
[    0.226708] ACPI: ACPI bus type pnp unregistered
[    0.226713] PnPBIOS: Disabled by ACPI PNP
[    0.264140] PCI: max bus depth: 2 pci_try_num: 3
[    0.264179] pci 0000:00:1e.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.264184] pci 0000:01:00.0: BAR 6: assigned [mem 0x91000000-0x9101ffff pref]
[    0.264189] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.264195] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xafffffff]
[    0.264199] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.264209] pci 0000:06:03.0: BAR 0: assigned [mem 0x88000000-0x88000fff]
[    0.264218] pci 0000:06:03.0: BAR 0: set to [mem 0x88000000-0x88000fff] (PCI address [0x88000000-0x88000fff])
[    0.264224] pci 0000:06:03.0: BAR 16: assigned [mem 0x8c000000-0x8fffffff]
[    0.264228] pci 0000:06:03.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.264232] pci 0000:06:03.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.264236] pci 0000:06:03.0: BAR 13: assigned [io  0x2800-0x28ff]
[    0.264240] pci 0000:06:03.0: CardBus bridge to [bus 07-0a]
[    0.264243] pci 0000:06:03.0:   bridge window [io  0x2800-0x28ff]
[    0.264250] pci 0000:06:03.0:   bridge window [io  0x2400-0x24ff]
[    0.264258] pci 0000:06:03.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.264266] pci 0000:06:03.0:   bridge window [mem 0x8c000000-0x8fffffff]
[    0.264274] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[    0.264278] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.264286] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.264292] pci 0000:00:1e.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.264320] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.264326] pci 0000:00:01.0: setting latency timer to 64
[    0.264335] pci 0000:00:1e.0: setting latency timer to 64
[    0.264345] pci 0000:06:03.0: enabling device (0000 -> 0003)
[    0.264352] pci 0000:06:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.264363] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.264367] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.264371] pci_bus 0000:01: resource 1 [mem 0x90000000-0xafffffff]
[    0.264374] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
[    0.264378] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.264381] pci_bus 0000:06: resource 1 [mem 0xb0000000-0xb00fffff]
[    0.264385] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.264388] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.264392] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.264395] pci_bus 0000:07: resource 0 [io  0x2800-0x28ff]
[    0.264398] pci_bus 0000:07: resource 1 [io  0x2400-0x24ff]
[    0.264402] pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.264406] pci_bus 0000:07: resource 3 [mem 0x8c000000-0x8fffffff]
[    0.264469] NET: Registered protocol family 2
[    0.264579] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.264912] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.266002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.266692] TCP: Hash tables configured (established 131072 bind 65536)
[    0.266696] TCP reno registered
[    0.266702] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.266726] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.266888] NET: Registered protocol family 1
[    0.266958] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.266981] pci 0000:00:1d.0: PCI INT A disabled
[    0.266995] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.267015] pci 0000:00:1d.1: PCI INT B disabled
[    0.267037] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.267057] pci 0000:00:1d.2: PCI INT C disabled
[    0.267067] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.267088] pci 0000:00:1d.3: PCI INT D disabled
[    0.267099] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.267139] pci 0000:00:1d.7: PCI INT A disabled
[    0.267168] pci 0000:01:00.0: Boot video device
[    0.267205] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
[    0.267212] PCI: CLS 64 bytes, default 64
[    0.267318] Simple Boot Flag at 0x36 set to 0x1
[    0.267732] audit: initializing netlink socket (disabled)
[    0.267750] type=2000 audit(1355488743.260:1): initialized
[    0.297152] Trying to unpack rootfs image as initramfs...
[    0.332746] highmem bounce pool size: 64 pages
[    0.332756] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.339371] VFS: Disk quotas dquot_6.5.2
[    0.339476] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.344136] fuse init (API version 7.17)
[    0.344295] msgmni has been set to 1685
[    0.356226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.356275] io scheduler noop registered
[    0.356278] io scheduler deadline registered
[    0.356289] io scheduler cfq registered (default)
[    0.356467] pcieport 0000:00:01.0: setting latency timer to 64
[    0.356512] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.356622] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.356665] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.357488] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.358457] ACPI: AC Adapter [ADP1] (on-line)
[    0.358575] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.359550] ACPI: Lid Switch [LID0]
[    0.359629] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.359636] ACPI: Power Button [PWRB]
[    0.359717] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.359722] ACPI: Power Button [PWRF]
[    0.732456] Freeing initrd memory: 13840k freed
[    1.264057] Refined TSC clocksource calibration: 1729.168 MHz.
[    1.264070] Switching to clocksource tsc
[    1.360172] Marking TSC unstable due to TSC halts in idle
[    1.360185] ACPI: acpi_idle registered with cpuidle
[    1.360567] Switching to clocksource hpet
[    1.363632] thermal LNXTHERM:00: registered as thermal_zone0
[    1.363636] ACPI: Thermal Zone [THRM] (58 C)
[    1.363665] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.363678] ACPI: Battery Slot [BAT0] (battery present)
[    1.363753] ERST: Table is not found!
[    1.363756] GHES: HEST is not enabled!
[    1.363975] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.366502] Linux agpgart interface v0.103
[    1.368049] isapnp: Scanning for PnP cards...
[    1.375165] brd: module loaded
[    1.376560] loop: module loaded
[    1.420597] ata_piix 0000:00:1f.1: version 2.13
[    1.420619] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.420671] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.464800] scsi0 : ata_piix
[    1.464904] scsi1 : ata_piix
[    1.465505] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[    1.465509] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[    1.466119] Fixed MDIO Bus: probed
[    1.466151] tun: Universal TUN/TAP device driver, 1.6
[    1.466154] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.466229] PPP generic driver version 2.4.2
[    1.466365] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.466390] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.466417] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.466422] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.466484] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.466527] ehci_hcd 0000:00:1d.7: debug port 1
[    1.470425] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.470623] ata2: port disabled--ignoring
[    1.470667] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x80004000
[    1.474598] ACPI: Battery Slot [BAT0] (battery present)
[    1.518231] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.562077] hub 1-0:1.0: USB hub found
[    1.562084] hub 1-0:1.0: 8 ports detected
[    1.562209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.562229] uhci_hcd: USB Universal Host Controller Interface driver
[    1.562261] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.562271] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.562276] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.562329] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.562359] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[    1.562545] hub 2-0:1.0: USB hub found
[    1.562551] hub 2-0:1.0: 2 ports detected
[    1.562645] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.562655] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.562660] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.562718] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.562761] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    1.562948] hub 3-0:1.0: USB hub found
[    1.562953] hub 3-0:1.0: 2 ports detected
[    1.563047] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.563057] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.563062] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.563122] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.563164] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.563350] hub 4-0:1.0: USB hub found
[    1.563355] hub 4-0:1.0: 2 ports detected
[    1.563451] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.563461] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.563466] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.563522] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.563564] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    1.563760] hub 5-0:1.0: USB hub found
[    1.563766] hub 5-0:1.0: 2 ports detected
[    1.563932] usbcore: registered new interface driver libusual
[    1.563993] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.567571] i8042: Detected active multiplexing controller, rev 1.1
[    1.571387] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.571395] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.571439] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.571477] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.571519] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.571686] mousedev: PS/2 mouse device common for all mice
[    1.571917] rtc_cmos 00:05: RTC can wake from S4
[    1.572076] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.572110] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.572203] device-mapper: uevent: version 1.0.3
[    1.572315] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.572368] EISA: Probing bus 0 at eisa.0
[    1.572378] Cannot allocate resource for EISA slot 1
[    1.572381] Cannot allocate resource for EISA slot 2
[    1.572415] EISA: Detected 0 cards.
[    1.572430] cpufreq-nforce2: No nForce2 chipset.
[    1.572473] cpuidle: using governor ladder
[    1.572533] cpuidle: using governor menu
[    1.572536] EFI Variables Facility v0.08 2004-May-17
[    1.572896] TCP cubic registered
[    1.573087] NET: Registered protocol family 10
[    1.573868] NET: Registered protocol family 17
[    1.573875] Registering the dns_resolver key type
[    1.573901] Using IPI No-Shortcut mode
[    1.574034] PM: Hibernation image not present or could not be loaded.
[    1.574052] registered taskstats version 1
[    1.713255]   Magic number: 8:493:683
[    1.713386] rtc_cmos 00:05: setting system clock to 2012-12-14 12:39:05 UTC (1355488745)
[    1.713635] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.713637] EDD information not available.
[    1.758134] isapnp: No Plug & Play device found
[    1.758767] ata1.00: ATA-7: HTS421280H9AT00, HA3OA70G, max UDMA/100
[    1.758771] ata1.00: 156301488 sectors, multi 16: LBA48
[    1.758779] ata1.01: ATAPI: TOSHIBA CD/DVDW SDR6472U, TU02, max UDMA/33
[    1.770932] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.772516] ata1.00: configured for UDMA/100
[    1.804351] ata1.01: configured for UDMA/33
[    1.805231] scsi 0:0:0:0: Direct-Access     ATA      HTS421280H9AT00  HA3O PQ: 0 ANSI: 5
[    1.805468] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.809062] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.812436] scsi 0:0:1:0: CD-ROM            TOSHIBA  CD/DVDW SDR6472U TU02 PQ: 0 ANSI: 5
[    1.817776] sd 0:0:0:0: [sda] Write Protect is off
[    1.817780] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.817796] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.817799] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.817978] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.818069] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.818195] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.894655]  sda: sda1 sda2 < sda5 sda6 >
[    1.895107] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.895178] Freeing unused kernel memory: 740k freed
[    1.895566] Write protecting the kernel text: 5824k
[    1.895586] Write protecting the kernel read-only data: 2376k
[    1.895588] NX-protecting the kernel data: 4416k
[    1.924184] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.932236] udevd[100]: starting version 175
[    2.057765] hub 1-1:1.0: USB hub found
[    2.058081] hub 1-1:1.0: 4 ports detected
[    2.140270] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    2.140274] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.140346] e100 0000:06:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.234208] e100 0000:06:08.0: PME# disabled
[    2.234919] e100 0000:06:08.0: eth0: addr 0xb0007000, irq 20, MAC addr 00:01:4a:c3:c9:da
[    2.234955] firewire_ohci 0000:06:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.288130] firewire_ohci: Added fw-ohci device 0000:06:03.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    2.360349] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[    2.468235] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[    2.468512] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.7-1.1/input0
[    2.468702] usbcore: registered new interface driver usbhid
[    2.468705] usbhid: USB HID core driver
[    2.532347] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[    2.788136] firewire_core: created device fw0: GUID 0800460301f1c01f, S400
[    3.005694] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    9.776354] usb 1-1.3: new full-speed USB device number 5 using ehci_hcd
[    9.940345] usb 1-1.4: new full-speed USB device number 6 using ehci_hcd
[   10.433108] Initializing USB Mass Storage driver...
[   10.433546] scsi2 : usb-storage 1-1.2:1.0
[   10.433698] usbcore: registered new interface driver usb-storage
[   10.433701] USB Mass Storage support registered.
[   11.433282] scsi 2:0:0:0: Direct-Access     Seagate  Desktop          0130 PQ: 0 ANSI: 4
[   11.434161] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   11.434722] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   11.435345] sd 2:0:0:0: [sdb] Write Protect is off
[   11.435350] sd 2:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[   11.435970] sd 2:0:0:0: [sdb] No Caching mode page present
[   11.435973] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   11.438222] sd 2:0:0:0: [sdb] No Caching mode page present
[   11.438226] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   15.388572]  sdb: sdb1 sdb2 sdb3
[   15.391099] sd 2:0:0:0: [sdb] No Caching mode page present
[   15.391103] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   15.391107] sd 2:0:0:0: [sdb] Attached SCSI disk
[   35.080402] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.322601] udevd[342]: starting version 175
[   35.406684] lp: driver loaded but no devices found
[   36.368058] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input5
[   36.369320] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[   36.516516] lib80211: common routines for IEEE802.11 drivers
[   36.516521] lib80211_crypt: registered algorithm 'NULL'
[   36.644944] intel_rng: FWH not detected
[   36.712957] sony_laptop: Sony Notebook Control Driver v0.6
[   36.713454] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/SNY5001:00/input/input6
[   36.713657] input: Sony Vaio Jogdial as /devices/virtual/input/input7
[   36.811063] cfg80211: Calling CRDA to update world regulatory domain
[   37.158420] cm109: Keymap for Komunikate KIP1000 phone loaded
[   37.159303] input: CM109 USB driver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.3/input/input8
[   37.160287] input: CM109 USB driver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.3/input/input9
[   37.161944] usbcore: registered new interface driver cm109
[   37.161960] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[   37.281126] yenta_cardbus 0000:06:03.0: CardBus bridge found [104d:818f]
[   37.281156] yenta_cardbus 0000:06:03.0: Using CSCINT to route CSC interrupts to PCI
[   37.281160] yenta_cardbus 0000:06:03.0: Routing CardBus interrupts to PCI
[   37.281167] yenta_cardbus 0000:06:03.0: TI: mfunc 0x01001b22, devctl 0x64
[   37.515240] yenta_cardbus 0000:06:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   37.515247] yenta_cardbus 0000:06:03.0: Socket status: 30000006
[   37.515253] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   37.515267] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[   37.515271] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x203f 0x23b0-0x23df 0x2400-0x24ff 0x27b0-0x27df 0x2800-0x28ff 0x2bb0-0x2bdf 0x2fb0-0x2fdf
[   37.524748] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0xb0000000-0xb00fffff]
[   37.524754] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0000000-0xb00fffff: excluding 0xb0000000-0xb000ffff
[   37.524773] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[   37.524777] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[   37.617648] libipw: 802.11 data/management/control stack, git-1.1.13
[   37.617653] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   37.623191] type=1400 audit(1355481581.404:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=841 comm="apparmor_parser"
[   37.624878] type=1400 audit(1355481581.408:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=846 comm="apparmor_parser"
[   37.625802] type=1400 audit(1355481581.408:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=841 comm="apparmor_parser"
[   37.626160] type=1400 audit(1355481581.408:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=841 comm="apparmor_parser"
[   37.627197] type=1400 audit(1355481581.408:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=846 comm="apparmor_parser"
[   37.627553] type=1400 audit(1355481581.408:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=846 comm="apparmor_parser"
[   37.685521] cfg80211: World regulatory domain updated:
[   37.685527] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   37.685531] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.685535] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.685539] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.685542] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.685546] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.735748] tifm_7xx1 0000:06:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   37.760033] tifm_core: MMC/SD card detected in socket 0:0
[   37.910705] usbcore: registered new interface driver snd-usb-audio
[   37.931743] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input10
[   37.948457] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input11
[   37.952352] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   37.952358] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   37.952512] ipw2200 0000:06:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   37.952551] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   38.063142] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.099380] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   38.267720] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x380-0x387
[   38.271955] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   38.272923] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   38.273692] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   38.274544] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xdc000-0xfffff
[   38.274582] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[   38.274617] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   38.274651] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   38.408662] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   38.408736] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[   38.408774] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   39.033279] cfg80211: failed to add phy80211 symlink to netdev!
[   39.033342] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   39.033347] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033351] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   39.033355] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033358] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   39.033362] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033365] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   39.033369] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033372] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   39.033376] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033379] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   39.033383] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033387] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   39.033391] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033394] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   39.033398] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033401] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   39.033405] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033408] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   39.033412] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033415] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   39.033419] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   39.033423] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   39.033426] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.033430] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   39.033434] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   39.033490] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   39.528365] nvidia: module license 'NVIDIA' taints kernel.
[   39.528370] Disabling lock debugging due to kernel taint
[   40.174848] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   40.174862] nvidia 0000:01:00.0: setting latency timer to 64
[   40.174892] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   40.178417] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.43  Sun Aug 19 20:20:21 PDT 2012
[   42.482063] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k
[   42.578005] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   42.795675] init: failsafe main process (1089) killed by TERM signal
[   42.814563] ppdev: user-space parallel port driver
[   42.882799] Bluetooth: Core ver 2.16
[   42.882858] NET: Registered protocol family 31
[   42.882861] Bluetooth: HCI device and connection manager initialized
[   42.882865] Bluetooth: HCI socket layer initialized
[   42.882868] Bluetooth: L2CAP socket layer initialized
[   42.882875] Bluetooth: SCO socket layer initialized
[   42.919002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   42.919007] Bluetooth: BNEP filters: protocol multicast
[   42.963019] type=1400 audit(1355481586.744:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1158 comm="apparmor_parser"
[   42.974741] Bluetooth: RFCOMM TTY layer initialized
[   42.974749] Bluetooth: RFCOMM socket layer initialized
[   42.974752] Bluetooth: RFCOMM ver 1.11
[   42.985473] type=1400 audit(1355481586.768:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1158 comm="apparmor_parser"
[   43.105094] type=1400 audit(1355481586.888:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1198 comm="apparmor_parser"
[   43.113693] type=1400 audit(1355481586.896:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1199 comm="apparmor_parser"
[   43.115707] type=1400 audit(1355481586.896:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1199 comm="apparmor_parser"
[   43.121423] type=1400 audit(1355481586.904:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1199 comm="apparmor_parser"
[   43.163453] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   43.164555] type=1400 audit(1355481586.948:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1201 comm="apparmor_parser"
[   43.183668] type=1400 audit(1355481586.964:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1201 comm="apparmor_parser"
[   43.187521] type=1400 audit(1355481586.968:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1201 comm="apparmor_parser"
[   43.192061] type=1400 audit(1355481586.976:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1201 comm="apparmor_parser"
[   45.282281] lib80211_crypt: registered algorithm 'TKIP'
[   45.521972] usb 1-1.2: USB disconnect, device number 4
[   45.524349] scsi 2:0:0:0: rejecting I/O to offline device
[   45.524355] scsi 2:0:0:0: [sdb] killing request
[   45.524371] scsi 2:0:0:0: [sdb] Unhandled error code
[   45.524374] scsi 2:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[   45.524380] scsi 2:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 6d a8 00 00 01 00
[   45.524391] end_request: I/O error, dev sdb, sector 1953525160
[   45.594306] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   45.594310] vesafb: scrolling: redraw
[   45.594314] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   45.595047] vesafb: framebuffer at 0xc0000000, mapped to 0xf8900000, using 1216k, total 1216k
[   45.595929] fbcon: VESA VGA (fb0) is primary device
[   45.596310] Console: switching to colour frame buffer device 80x30
[   45.596332] fb0: VESA VGA frame buffer device
[   45.634422] init: plymouth-splash main process (1584) terminated with status 1
[   47.467594] NVRM: Your system is not currently configured to drive a VGA console
[   47.467600] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   47.467604] NVRM: requires the use of a text-mode VGA console. Use of other console
[   47.467608] NVRM: drivers including, but not limited to, vesafb, may result in
[   47.467611] NVRM: corruption and stability problems, and is not supported.
[   48.955534] sched: RT throttling activated
[   55.856020] eth1: no IPv6 routers present

[heartsmagic]

@ozdemirbrhm, iki farklı yerde bekliyor. Birincisi USB diskin takılı olduğu yerde, ancak daha fazla eth0 üzerindeki bağlantı düştüğünde. Bu konuda farklı yorumlar var. Kablodan dolayı sıkıntı yaşıyor olabilirmişsin örneğin. Bunun haricinde ağ yöneticisinden mevcut ağı silip, tekrar oluşturmayı da deneyebilirsin.

[ozdemirbrhm]

@heartsmagic harici aygıtların bağlantısını kestim ve eth0 üzerindeki ağı sildim ki zaten eth1'i kullanmaktayım. ama maalesef değişen bir şey olmadı. yeni bootchart görüntüsünü de yardımı olabilir düşüncesiyle aşağıya ekledim.

http://postimage.org/image/9w6ls8zbv/dbac83e6/

[heartsmagic]

"Bootchart"a bakmak cidden zor oluyor. dmesg çıktısı aynı mı? Kısacası yine eth0 adımında çok bekliyor mu? Kablosuz ile mi bağlanıyorsun internete?

[ozdemirbrhm]

evet yine eth0'da çok bekliyor ve evet kablosuz ile bağlanıyorum.

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-33-generic-pae (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #52-Ubuntu SMP Thu Oct 18 16:39:21 UTC 2012 (Ubuntu 3.2.0-33.52-generic-pae 3.2.31)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007feea000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007feea000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Sony Corporation VGN-FS315M, BIOS R0084J1 06/02/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 2  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 364e8000 - 3726c000
[    0.000000] ACPI: RSDP 000f74f0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 7fee5896 00044 (v01   Sony       J1 20060602 PTL  00000000)
[    0.000000] ACPI: APIC 7fee9e78 00068 (v01   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: FACP 7fee9ee0 00084 (v02   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: DSDT 7fee632b 03B4D (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: FACS 7fefafc0 00040
[    0.000000] ACPI: BOOT 7fee9fd8 00028 (v01   Sony       J1 20060602 PTL  00000001)
[    0.000000] ACPI: MCFG 7fee9f9c 0003C (v01   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: SSDT 7fee6153 001D4 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee5d0e 00235 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee5af3 0021B (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee58da 00219 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1154MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0007fee0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fee0
[    0.000000] On node 0 totalpages: 523887
[    0.000000] free_area_init_node: node 0, pgdat c1869140, node_mem_map f54e8200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2310 pages used for memmap
[    0.000000]   HighMem zone: 293340 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34240 r0 d23104 u57344
[    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519793
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-33-generic-pae root=UUID=68E47309E472D930 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8383744 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007fee0)
[    0.000000] Memory: 2045804k/2096000k available (5821k kernel code, 49744k reserved, 2845k data, 740k init, 1182600k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
[    0.000000]       .data : 0xc15af47c - 0xc1876940   (2845 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15af47c   (5821 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1729.104 MHz processor.
[    0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.20 BogoMIPS (lpj=6916416)
[    0.008012] pid_max: default: 32768 minimum: 301
[    0.008047] Security Framework initialized
[    0.008082] AppArmor: AppArmor initialized
[    0.008085] Yama: becoming mindful.
[    0.008199] Mount-cache hash table entries: 512
[    0.008429] Initializing cgroup subsys cpuacct
[    0.008439] Initializing cgroup subsys memory
[    0.008453] Initializing cgroup subsys devices
[    0.008457] Initializing cgroup subsys freezer
[    0.008460] Initializing cgroup subsys blkio
[    0.008473] Initializing cgroup subsys perf_event
[    0.008510] Disabled fast string operations
[    0.008520] mce: CPU supports 5 MCE banks
[    0.008532] CPU0: Thermal monitoring enabled (TM2)
[    0.008932] SMP alternatives: switching to UP code
[    0.024289] ACPI: Core revision 20110623
[    0.032041] ftrace: allocating 26569 entries in 52 pages
[    0.036077] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.040438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080134] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[    0.084004] Performance Events: p6 PMU driver.
[    0.084004] ... version:                0
[    0.084004] ... bit width:              32
[    0.084004] ... generic registers:      2
[    0.084004] ... value mask:             00000000ffffffff
[    0.084004] ... max period:             000000007fffffff
[    0.084004] ... fixed-purpose events:   0
[    0.084004] ... event mask:             0000000000000003
[    0.084004] NMI watchdog enabled, takes one hw-pmu counter.
[    0.084004] Brought up 1 CPUs
[    0.084004] Total of 1 processors activated (3458.20 BogoMIPS).
[    0.084004] devtmpfs: initialized
[    0.084004] EVM: security.selinux
[    0.084004] EVM: security.SMACK64
[    0.084004] EVM: security.capability
[    0.084004] PM: Registering ACPI NVS region at 7feea000 (90112 bytes)
[    0.084004] print_constraints: dummy:
[    0.084004] RTC time: 10:25:43, date: 12/15/12
[    0.084004] NET: Registered protocol family 16
[    0.084004] EISA bus registered
[    0.084004] ACPI: bus type pci registered
[    0.084004] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.084004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.084004] PCI: Using MMCONFIG for extended config space
[    0.084004] PCI: Using configuration type 1 for base access
[    0.085678] bio: create slab <bio-0> at 0
[    0.085794] ACPI: Added _OSI(Module Device)
[    0.085797] ACPI: Added _OSI(Processor Device)
[    0.085800] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.085803] ACPI: Added _OSI(Processor Aggregator Device)
[    0.087121] ACPI: EC: Look up EC in DSDT
[    0.192067] ACPI: Interpreter enabled
[    0.192079] ACPI: (supports S0 S3 S4 S5)
[    0.192106] ACPI: Using IOAPIC for interrupt routing
[    0.197590] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.197760] ACPI: No dock devices found.
[    0.197762] HEST: Table not found.
[    0.197768] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.198179] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.198998] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.199003] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.199007] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.199011] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.199014] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.199018] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.199023] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[    0.199037] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[    0.199093] pci 0000:00:01.0: [8086:2591] type 1 class 0x000604
[    0.199143] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.199148] pci 0000:00:01.0: PME# disabled
[    0.199215] pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403
[    0.199240] pci 0000:00:1b.0: reg 10: [mem 0x80000000-0x80003fff 64bit]
[    0.199347] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.199353] pci 0000:00:1b.0: PME# disabled
[    0.199380] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[    0.199439] pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
[    0.199484] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[    0.199543] pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
[    0.199588] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[    0.199647] pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
[    0.199692] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
[    0.199751] pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
[    0.199807] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[    0.199832] pci 0000:00:1d.7: reg 10: [mem 0x80004000-0x800043ff]
[    0.199942] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.199949] pci 0000:00:1d.7: PME# disabled
[    0.199974] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.200075] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[    0.200188] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.200198] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.200206] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.200234] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
[    0.200252] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.200266] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.200279] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.200292] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.200306] pci 0000:00:1f.1: reg 20: [io  0x1880-0x188f]
[    0.200356] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
[    0.200432] pci 0000:00:1f.3: reg 20: [io  0x18a0-0x18bf]
[    0.200534] pci 0000:01:00.0: [10de:0168] type 0 class 0x000300
[    0.200551] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xa0ffffff]
[    0.200570] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.200589] pci 0000:01:00.0: reg 1c: [mem 0x90000000-0x90ffffff 64bit]
[    0.200611] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.200682] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.200694] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.200700] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xafffffff]
[    0.200705] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.200764] pci 0000:06:03.0: [104c:ac8e] type 2 class 0x000607
[    0.200797] pci 0000:06:03.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.200851] pci 0000:06:03.0: supports D1 D2
[    0.200854] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.200861] pci 0000:06:03.0: PME# disabled
[    0.200896] pci 0000:06:03.2: [104c:802e] type 0 class 0x000c00
[    0.200929] pci 0000:06:03.2: reg 10: [mem 0xb0004000-0xb00047ff]
[    0.200948] pci 0000:06:03.2: reg 14: [mem 0xb0000000-0xb0003fff]
[    0.201079] pci 0000:06:03.2: supports D1 D2
[    0.201082] pci 0000:06:03.2: PME# supported from D0 D1 D2 D3hot
[    0.201089] pci 0000:06:03.2: PME# disabled
[    0.201118] pci 0000:06:03.3: [104c:ac8f] type 0 class 0x000180
[    0.201151] pci 0000:06:03.3: reg 10: [mem 0xb0005000-0xb0005fff]
[    0.201294] pci 0000:06:03.3: supports D1 D2
[    0.201297] pci 0000:06:03.3: PME# supported from D0 D1 D2 D3hot
[    0.201304] pci 0000:06:03.3: PME# disabled
[    0.201342] pci 0000:06:04.0: [8086:4220] type 0 class 0x000280
[    0.201374] pci 0000:06:04.0: reg 10: [mem 0xb0006000-0xb0006fff]
[    0.201521] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
[    0.201528] pci 0000:06:04.0: PME# disabled
[    0.201564] pci 0000:06:08.0: [8086:1068] type 0 class 0x000200
[    0.201595] pci 0000:06:08.0: reg 10: [mem 0xb0007000-0xb0007fff]
[    0.201614] pci 0000:06:08.0: reg 14: [io  0x2000-0x203f]
[    0.201740] pci 0000:06:08.0: supports D1 D2
[    0.201743] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.201750] pci 0000:06:08.0: PME# disabled
[    0.201814] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[    0.201820] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.201827] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.201836] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.201840] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.201906] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[    0.201922] pci_bus 0000:00: on NUMA node 0
[    0.201927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.202168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.202278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.202418]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.202423]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.202426] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.206501] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.206574] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[    0.206643] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.206712] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.206781] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.206849] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.206919] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.206989] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.207167] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.207174] vgaarb: loaded
[    0.207176] vgaarb: bridge control possible 0000:01:00.0
[    0.207352] i2c-core: driver [aat2870] using legacy suspend method
[    0.207354] i2c-core: driver [aat2870] using legacy resume method
[    0.207465] SCSI subsystem initialized
[    0.207515] libata version 3.00 loaded.
[    0.207581] usbcore: registered new interface driver usbfs
[    0.207599] usbcore: registered new interface driver hub
[    0.207633] usbcore: registered new device driver usb
[    0.207762] PCI: Using ACPI for IRQ routing
[    0.218087] PCI: pci_cache_line_size set to 64 bytes
[    0.218186] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.218189] reserve RAM buffer: 000000007fee0000 - 000000007fffffff
[    0.218339] NetLabel: Initializing
[    0.218341] NetLabel:  domain hash size = 128
[    0.218343] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.218358] NetLabel:  unlabeled traffic allowed by default
[    0.218552] hpet clockevent registered
[    0.218558] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.218566] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.218572] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.224059] Switching to clocksource hpet
[    0.236306] AppArmor: AppArmor Filesystem Enabled
[    0.236363] pnp: PnP ACPI init
[    0.236400] ACPI: bus type pnp registered
[    0.237481] pnp 00:00: [bus 00-ff]
[    0.237486] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.237489] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.237493] pnp 00:00: [io  0x0d00-0xffff window]
[    0.237496] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.237500] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.237503] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.237507] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.237510] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.237513] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.237517] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.237520] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.237523] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.237527] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.237530] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.237534] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.237537] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.237540] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.237544] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.237637] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.237879] pnp 00:01: [io  0x0000-0x001f]
[    0.237882] pnp 00:01: [io  0x0081-0x0091]
[    0.237885] pnp 00:01: [io  0x0093-0x009f]
[    0.237888] pnp 00:01: [io  0x00c0-0x00df]
[    0.237892] pnp 00:01: [dma 4]
[    0.237953] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.237967] pnp 00:02: [mem 0xff800000-0xffffffff]
[    0.238021] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.238070] pnp 00:03: [io  0x00f0]
[    0.238093] pnp 00:03: [irq 13]
[    0.238151] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.238186] pnp 00:04: [io  0x0061]
[    0.238189] pnp 00:04: [io  0x0063]
[    0.238192] pnp 00:04: [io  0x0065]
[    0.238194] pnp 00:04: [io  0x0067]
[    0.238197] pnp 00:04: [io  0x0070]
[    0.238200] pnp 00:04: [io  0x0080]
[    0.238202] pnp 00:04: [io  0x0092]
[    0.238205] pnp 00:04: [io  0x00b2-0x00b3]
[    0.238208] pnp 00:04: [io  0x0380-0x0383]
[    0.238211] pnp 00:04: [io  0x0800-0x080f]
[    0.238214] pnp 00:04: [io  0x1000-0x107f]
[    0.238217] pnp 00:04: [io  0x1180-0x11bf]
[    0.238220] pnp 00:04: [io  0x1640-0x164f]
[    0.238223] pnp 00:04: [io  0xfe00-0xfe7f]
[    0.238226] pnp 00:04: [io  0xfe80-0xfeff]
[    0.238229] pnp 00:04: [mem 0xf0008000-0xf000bfff]
[    0.238232] pnp 00:04: [mem 0xf0000000-0xf0003fff]
[    0.238235] pnp 00:04: [mem 0xf0005000-0xf0005fff]
[    0.238239] pnp 00:04: [mem 0xf0004000-0xf0004fff]
[    0.238242] pnp 00:04: [mem 0xe0000000-0xefffffff]
[    0.238358] system 00:04: [io  0x0380-0x0383] has been reserved
[    0.238363] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.238367] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.238371] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.238375] system 00:04: [io  0x1640-0x164f] has been reserved
[    0.238379] system 00:04: [io  0xfe00-0xfe7f] has been reserved
[    0.238383] system 00:04: [io  0xfe80-0xfeff] has been reserved
[    0.238388] system 00:04: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.238392] system 00:04: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.238396] system 00:04: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.238401] system 00:04: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.238405] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.238410] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.238440] pnp 00:05: [io  0x0070-0x0077]
[    0.238498] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.238517] pnp 00:06: [io  0x0060]
[    0.238520] pnp 00:06: [io  0x0064]
[    0.238529] pnp 00:06: [irq 1]
[    0.238592] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.238609] pnp 00:07: [irq 12]
[    0.238668] pnp 00:07: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.238697] pnp: PnP ACPI: found 8 devices
[    0.238699] ACPI: ACPI bus type pnp unregistered
[    0.238704] PnPBIOS: Disabled by ACPI PNP
[    0.276131] PCI: max bus depth: 2 pci_try_num: 3
[    0.276168] pci 0000:00:1e.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.276173] pci 0000:01:00.0: BAR 6: assigned [mem 0x91000000-0x9101ffff pref]
[    0.276178] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.276183] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xafffffff]
[    0.276188] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.276198] pci 0000:06:03.0: BAR 0: assigned [mem 0x88000000-0x88000fff]
[    0.276207] pci 0000:06:03.0: BAR 0: set to [mem 0x88000000-0x88000fff] (PCI address [0x88000000-0x88000fff])
[    0.276213] pci 0000:06:03.0: BAR 16: assigned [mem 0x8c000000-0x8fffffff]
[    0.276217] pci 0000:06:03.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.276221] pci 0000:06:03.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.276225] pci 0000:06:03.0: BAR 13: assigned [io  0x2800-0x28ff]
[    0.276228] pci 0000:06:03.0: CardBus bridge to [bus 07-0a]
[    0.276232] pci 0000:06:03.0:   bridge window [io  0x2800-0x28ff]
[    0.276239] pci 0000:06:03.0:   bridge window [io  0x2400-0x24ff]
[    0.276247] pci 0000:06:03.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.276255] pci 0000:06:03.0:   bridge window [mem 0x8c000000-0x8fffffff]
[    0.276262] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[    0.276267] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.276275] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.276281] pci 0000:00:1e.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.276309] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.276315] pci 0000:00:01.0: setting latency timer to 64
[    0.276324] pci 0000:00:1e.0: setting latency timer to 64
[    0.276335] pci 0000:06:03.0: enabling device (0000 -> 0003)
[    0.276341] pci 0000:06:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.276352] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.276356] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.276360] pci_bus 0000:01: resource 1 [mem 0x90000000-0xafffffff]
[    0.276363] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
[    0.276367] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.276371] pci_bus 0000:06: resource 1 [mem 0xb0000000-0xb00fffff]
[    0.276374] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.276378] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.276381] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.276385] pci_bus 0000:07: resource 0 [io  0x2800-0x28ff]
[    0.276388] pci_bus 0000:07: resource 1 [io  0x2400-0x24ff]
[    0.276391] pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.276395] pci_bus 0000:07: resource 3 [mem 0x8c000000-0x8fffffff]
[    0.276458] NET: Registered protocol family 2
[    0.276567] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.276901] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.277991] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.278683] TCP: Hash tables configured (established 131072 bind 65536)
[    0.278687] TCP reno registered
[    0.278693] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.278717] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.278882] NET: Registered protocol family 1
[    0.278953] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.278975] pci 0000:00:1d.0: PCI INT A disabled
[    0.278990] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.279010] pci 0000:00:1d.1: PCI INT B disabled
[    0.279032] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.279052] pci 0000:00:1d.2: PCI INT C disabled
[    0.279063] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.279082] pci 0000:00:1d.3: PCI INT D disabled
[    0.279094] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.279133] pci 0000:00:1d.7: PCI INT A disabled
[    0.279163] pci 0000:01:00.0: Boot video device
[    0.279199] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
[    0.279206] PCI: CLS 64 bytes, default 64
[    0.279311] Simple Boot Flag at 0x36 set to 0x1
[    0.279722] audit: initializing netlink socket (disabled)
[    0.279739] type=2000 audit(1355567143.272:1): initialized
[    0.309140] Trying to unpack rootfs image as initramfs...
[    0.344788] highmem bounce pool size: 64 pages
[    0.344797] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.351355] VFS: Disk quotas dquot_6.5.2
[    0.351460] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.356148] fuse init (API version 7.17)
[    0.356309] msgmni has been set to 1685
[    0.368245] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.368296] io scheduler noop registered
[    0.368298] io scheduler deadline registered
[    0.368309] io scheduler cfq registered (default)
[    0.368489] pcieport 0000:00:01.0: setting latency timer to 64
[    0.368533] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.368643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.368686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.369524] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.370476] ACPI: AC Adapter [ADP1] (on-line)
[    0.370594] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.371568] ACPI: Lid Switch [LID0]
[    0.371645] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.371653] ACPI: Power Button [PWRB]
[    0.371735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.371740] ACPI: Power Button [PWRF]
[    0.744491] Freeing initrd memory: 13840k freed
[    1.276054] Refined TSC clocksource calibration: 1729.169 MHz.
[    1.276067] Switching to clocksource tsc
[    1.372173] Marking TSC unstable due to TSC halts in idle
[    1.372187] ACPI: acpi_idle registered with cpuidle
[    1.372566] Switching to clocksource hpet
[    1.377423] thermal LNXTHERM:00: registered as thermal_zone0
[    1.377427] ACPI: Thermal Zone [THRM] (61 C)
[    1.377456] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.377470] ACPI: Battery Slot [BAT0] (battery present)
[    1.377545] ERST: Table is not found!
[    1.377547] GHES: HEST is not enabled!
[    1.377765] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.380252] Linux agpgart interface v0.103
[    1.381987] isapnp: Scanning for PnP cards...
[    1.389000] brd: module loaded
[    1.390384] loop: module loaded
[    1.390756] ACPI: Battery Slot [BAT0] (battery present)
[    1.434427] ata_piix 0000:00:1f.1: version 2.13
[    1.434448] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.434502] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.434999] scsi0 : ata_piix
[    1.435104] scsi1 : ata_piix
[    1.435700] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[    1.435704] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[    1.436305] Fixed MDIO Bus: probed
[    1.436338] tun: Universal TUN/TAP device driver, 1.6
[    1.436340] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.436447] PPP generic driver version 2.4.2
[    1.436582] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.436606] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.436632] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.436638] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.436832] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.436872] ehci_hcd 0000:00:1d.7: debug port 1
[    1.440769] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.440809] ata2: port disabled--ignoring
[    1.440854] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x80004000
[    1.488361] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.532181] hub 1-0:1.0: USB hub found
[    1.532188] hub 1-0:1.0: 8 ports detected
[    1.532311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.532332] uhci_hcd: USB Universal Host Controller Interface driver
[    1.532362] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.532372] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.532377] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.532430] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.532459] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[    1.532643] hub 2-0:1.0: USB hub found
[    1.532649] hub 2-0:1.0: 2 ports detected
[    1.532745] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.532755] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.532760] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.532818] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.532862] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    1.533048] hub 3-0:1.0: USB hub found
[    1.533053] hub 3-0:1.0: 2 ports detected
[    1.533147] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.533157] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.533161] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.533217] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.533258] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.533449] hub 4-0:1.0: USB hub found
[    1.533454] hub 4-0:1.0: 2 ports detected
[    1.533549] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.533559] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.533563] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.533620] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.533663] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    1.533857] hub 5-0:1.0: USB hub found
[    1.533863] hub 5-0:1.0: 2 ports detected
[    1.534029] usbcore: registered new interface driver libusual
[    1.534091] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.536533] i8042: Detected active multiplexing controller, rev 1.1
[    1.541585] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.541595] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.541639] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.541676] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.541718] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.541882] mousedev: PS/2 mouse device common for all mice
[    1.542113] rtc_cmos 00:05: RTC can wake from S4
[    1.542257] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.542292] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.542379] device-mapper: uevent: version 1.0.3
[    1.542492] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.542546] EISA: Probing bus 0 at eisa.0
[    1.542555] Cannot allocate resource for EISA slot 1
[    1.542559] Cannot allocate resource for EISA slot 2
[    1.542591] EISA: Detected 0 cards.
[    1.542606] cpufreq-nforce2: No nForce2 chipset.
[    1.542650] cpuidle: using governor ladder
[    1.542710] cpuidle: using governor menu
[    1.542713] EFI Variables Facility v0.08 2004-May-17
[    1.543074] TCP cubic registered
[    1.543268] NET: Registered protocol family 10
[    1.544065] NET: Registered protocol family 17
[    1.544072] Registering the dns_resolver key type
[    1.544098] Using IPI No-Shortcut mode
[    1.544232] PM: Hibernation image not present or could not be loaded.
[    1.544250] registered taskstats version 1
[    1.683664]   Magic number: 8:597:426
[    1.683796] rtc_cmos 00:05: setting system clock to 2012-12-15 10:25:45 UTC (1355567145)
[    1.684090] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.684092] EDD information not available.
[    1.772510] isapnp: No Plug & Play device found
[    1.772524] ata1.00: ATA-7: HTS421280H9AT00, HA3OA70G, max UDMA/100
[    1.772528] ata1.00: 156301488 sectors, multi 16: LBA48
[    1.772536] ata1.01: ATAPI: TOSHIBA CD/DVDW SDR6472U, TU02, max UDMA/33
[    1.775565] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.788521] ata1.00: configured for UDMA/100
[    1.820354] ata1.01: configured for UDMA/33
[    1.821162] scsi 0:0:0:0: Direct-Access     ATA      HTS421280H9AT00  HA3O PQ: 0 ANSI: 5
[    1.821403] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.821479] sd 0:0:0:0: [sda] Write Protect is off
[    1.821483] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.821515] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.821954] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.882601] scsi 0:0:1:0: CD-ROM            TOSHIBA  CD/DVDW SDR6472U TU02 PQ: 0 ANSI: 5
[    1.905650]  sda: sda1 sda2 < sda5 sda6 >
[    1.910688] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.910692] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.910834] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.910999] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.912017] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.912090] Freeing unused kernel memory: 740k freed
[    1.912481] Write protecting the kernel text: 5824k
[    1.912502] Write protecting the kernel read-only data: 2376k
[    1.912504] NX-protecting the kernel data: 4416k
[    1.949116] udevd[101]: starting version 175
[    2.147445] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    2.147450] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.147524] e100 0000:06:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.227494] e100 0000:06:08.0: PME# disabled
[    2.230056] e100 0000:06:08.0: eth0: addr 0xb0007000, irq 20, MAC addr 00:01:4a:c3:c9:da
[    2.230091] firewire_ohci 0000:06:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.284095] firewire_ohci: Added fw-ohci device 0000:06:03.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    2.784137] firewire_core: created device fw0: GUID 0800460301f1c01f, S400
[    3.002563] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   34.948751] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.192968] udevd[335]: starting version 175
[   35.333395] lp: driver loaded but no devices found
[   36.180896] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input4
[   36.181012] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[   36.204536] intel_rng: FWH not detected
[   36.267169] lib80211: common routines for IEEE802.11 drivers
[   36.267175] lib80211_crypt: registered algorithm 'NULL'
[   36.557982] cfg80211: Calling CRDA to update world regulatory domain
[   36.623950] sony_laptop: Sony Notebook Control Driver v0.6
[   36.625653] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/SNY5001:00/input/input5
[   36.625947] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[   36.876111] yenta_cardbus 0000:06:03.0: CardBus bridge found [104d:818f]
[   36.876143] yenta_cardbus 0000:06:03.0: Using CSCINT to route CSC interrupts to PCI
[   36.876146] yenta_cardbus 0000:06:03.0: Routing CardBus interrupts to PCI
[   36.876154] yenta_cardbus 0000:06:03.0: TI: mfunc 0x01001b22, devctl 0x64
[   37.108983] yenta_cardbus 0000:06:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   37.108990] yenta_cardbus 0000:06:03.0: Socket status: 30000006
[   37.108996] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   37.109008] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[   37.109012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x203f 0x23b0-0x23df 0x2400-0x24ff 0x27b0-0x27df 0x2800-0x28ff 0x2bb0-0x2bdf 0x2fb0-0x2fdf
[   37.118627] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0xb0000000-0xb00fffff]
[   37.118633] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0000000-0xb00fffff: excluding 0xb0000000-0xb000ffff
[   37.118652] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[   37.118656] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[   37.374692] libipw: 802.11 data/management/control stack, git-1.1.13
[   37.374697] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   37.401588] type=1400 audit(1355559981.214:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=800 comm="apparmor_parser"
[   37.402978] type=1400 audit(1355559981.214:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=804 comm="apparmor_parser"
[   37.404662] type=1400 audit(1355559981.218:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=800 comm="apparmor_parser"
[   37.405020] type=1400 audit(1355559981.218:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=800 comm="apparmor_parser"
[   37.406527] cfg80211: World regulatory domain updated:
[   37.406531] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   37.406535] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.406539] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.406542] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.406546] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.406550] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.406904] type=1400 audit(1355559981.218:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=804 comm="apparmor_parser"
[   37.407260] type=1400 audit(1355559981.218:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=804 comm="apparmor_parser"
[   37.440220] tifm_7xx1 0000:06:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   37.464033] tifm_core: MMC/SD card detected in socket 0:0
[   37.742282] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   37.742287] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   37.742441] ipw2200 0000:06:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   37.742478] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   37.842047] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7
[   37.845143] ip_tables: (C) 2000-2006 Netfilter Core Team
[   37.846911]  0x370-0x377 0x380-0x387
[   37.847032] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   37.848085] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   37.848906] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   37.849816] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xdc000-0xfffff
[   37.849853] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[   37.849889] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   37.849922] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   37.875811] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   37.896168] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
[   37.913612] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
[   38.229561] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   38.229639] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[   38.229676] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   38.657375] cfg80211: failed to add phy80211 symlink to netdev!
[   38.657467] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   38.657472] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657475] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   38.657479] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657482] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   38.657486] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657490] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   38.657494] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657497] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   38.657501] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657504] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   38.657508] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657511] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   38.657515] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657518] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   38.657522] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657525] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   38.657529] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657533] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   38.657537] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657540] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   38.657544] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.657547] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   38.657551] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.657554] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   38.657558] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.657888] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   39.299084] nvidia: module license 'NVIDIA' taints kernel.
[   39.299091] Disabling lock debugging due to kernel taint
[   39.936615] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   39.936629] nvidia 0000:01:00.0: setting latency timer to 64
[   39.936635] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   39.942025] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.43  Sun Aug 19 20:20:21 PDT 2012
[   41.236431] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   41.236435] vesafb: scrolling: redraw
[   41.236439] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   41.237600] vesafb: framebuffer at 0xc0000000, mapped to 0xf8700000, using 1216k, total 1216k
[   41.237956] fbcon: VESA VGA (fb0) is primary device
[   41.238046] Console: switching to colour frame buffer device 80x30
[   41.238068] fb0: VESA VGA frame buffer device
[   42.497968] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k
[   42.560326] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   42.823766] init: failsafe main process (1059) killed by TERM signal
[   42.842970] ppdev: user-space parallel port driver
[   42.912356] Bluetooth: Core ver 2.16
[   42.912392] NET: Registered protocol family 31
[   42.912395] Bluetooth: HCI device and connection manager initialized
[   42.912399] Bluetooth: HCI socket layer initialized
[   42.912401] Bluetooth: L2CAP socket layer initialized
[   42.912408] Bluetooth: SCO socket layer initialized
[   42.944465] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   42.944471] Bluetooth: BNEP filters: protocol multicast
[   42.982972] type=1400 audit(1355559986.794:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1125 comm="apparmor_parser"
[   42.995893] type=1400 audit(1355559986.806:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1125 comm="apparmor_parser"
[   43.048107] Bluetooth: RFCOMM TTY layer initialized
[   43.048115] Bluetooth: RFCOMM socket layer initialized
[   43.048118] Bluetooth: RFCOMM ver 1.11
[   43.148274] type=1400 audit(1355559986.962:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1172 comm="apparmor_parser"
[   43.154708] type=1400 audit(1355559986.966:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1174 comm="apparmor_parser"
[   43.158292] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   43.161199] type=1400 audit(1355559986.974:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1174 comm="apparmor_parser"
[   43.161560] type=1400 audit(1355559986.974:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1174 comm="apparmor_parser"
[   43.213241] type=1400 audit(1355559987.026:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1176 comm="apparmor_parser"
[   43.229298] type=1400 audit(1355559987.042:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1176 comm="apparmor_parser"
[   43.231054] type=1400 audit(1355559987.042:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1176 comm="apparmor_parser"
[   43.232769] type=1400 audit(1355559987.046:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1176 comm="apparmor_parser"
[   45.471553] NVRM: Your system is not currently configured to drive a VGA console
[   45.471559] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   45.471563] NVRM: requires the use of a text-mode VGA console. Use of other console
[   45.471567] NVRM: drivers including, but not limited to, vesafb, may result in
[   45.471570] NVRM: corruption and stability problems, and is not supported.
[   46.972087] lib80211_crypt: registered algorithm 'TKIP'



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 15 Aralık 2012 - 10:42:02
iwconfig çıktısı da şu şekilde:

Kod Seç Genişlet

lo        no wireless extensions.

eth1      IEEE 802.11bg  ESSID:"fdgdfg" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: C8:6C:87:93:13:18   
          Bit Rate:54 Mb/s   Tx-Power=20 dBm   Sensitivity=8/0 
          Retry limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=95/100  Signal level=-31 dBm  Noise level=-51 dBm
          Rx invalid nwid:0  Rx invalid crypt:1  Rx invalid frag:0
          Tx excessive retries:20  Invalid misc:0   Missed beacon:2

eth0      no wireless extensions.


[arpia]

ipv6'yı kapatmayı deneyiniz.
Forumda örnekleri mevcut.

[ozdemirbrhm]

zaten kapalı ipv6.

cat /proc/sys/net/ipv6/conf/all/disable_ipv6 çıktısı:

Kod Seç Genişlet

1

[if]

@ozdemirbrhm,

Kod Seç Genişlet

lspci çıktısını alayım.

Başlangıç uygulamalarından kullanmadıklarınızı kaldırın.

[ozdemirbrhm]

başlangıç uygulamalarındaki gereksiz tüm programlar etkisiz kılmıştım zaten.

lspci çıktısı:

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation NV44 [GeForce Go 6400] (rev a1)
06:03.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
06:03.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
06:03.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller
06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 03)



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 16 Aralık 2012 - 12:53:01
açıkçası bunun donanımsal olduğunu düşünmüyorum. çünkü format sonrası belirli bir süre uygun bir başlangıç süresi vardı fakat bir zaman sonra bu hale geldi. windows'ta herkesin alışık olduğu şişmeler gibi.güncellemeler, dahası kernel güncellemesi olabilir mi diye düşünüyorum. öyleyse de çözümü nasıl olabilir?

[if]

@ozdemirbrhm, farklı çekirdek kurarak gözlemleyebilirsiniz durumu. Anlamış oluruz.

Bir de

Kod Seç Genişlet

sudo lshw -c network çıktısını alayım.

[ozdemirbrhm]

@ozdemirbrhm, farklı çekirdek kurarak gözlemleyebilirsiniz durumu. Anlamış oluruz.

Bir de

Kod Seç Genişlet

sudo lshw -c network çıktısını alayım.

Kod Seç Genişlet

  *-network:0             
       açıklama: Kablosuz arayüz
       ürün: PRO/Wireless 2200BG [Calexico2] Network Connection
       üretici: Intel Corporation
       physical id: 4
       bus info: pci@0000:06:04.0
       mantıksal ad: eth1
       sürüm: 05
       serial: 00:13:ce:75:85:6d
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=ipw2200 driverversion=1.2.2kmprq firmware=ABG:9.0.5.27 (Dec 12 2007) ip=192.168.1.33 latency=32 link=yes maxlatency=24 mingnt=3 multicast=yes wireless=IEEE 802.11bg
       kaynaklar: irq:22 bellek:b0006000-b0006fff
  *-network:1
       açıklama: Eternet interface
       ürün: 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
       üretici: Intel Corporation
       physical id: 8
       bus info: pci@0000:06:08.0
       mantıksal ad: eth0
       sürüm: 03
       serial: 00:01:4a:c3:c9:da
       boyut: 10Mbit/s
       kapasite: 100Mbit/s
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A latency=66 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s
       kaynaklar: irq:20 bellek:b0007000-b0007fff ioport:2000(boyut=64)


[if]

Kod Seç Genişlet

modinfo -p e100 ne diyor?

[ozdemirbrhm]

Kod Seç Genişlet

modinfo -p e100 ne diyor?

Kod Seç Genişlet

debug:Debug level (0=none,...,16=all) (int)
eeprom_bad_csum_allow:Allow bad eeprom checksums (int)
use_io:Force use of i/o access mode (int)

[if]

@ozdemirbrhm,

Kod Seç Genişlet

gksu gedit /etc/network/interfaces dosyası içine

Kod Seç Genişlet

iface eth0 inet dhcp
pre-up /sbin/ifconfig $IFACE mtu 1492 yazıp kaydedin ve yeniden başlatın, değişen bir şey var mı bakalım.

[ozdemirbrhm]

hızda herhangi bir şey değişmedi fakat ağ bağlantısı kurulamadı. ben de orjinal haline döndüm.

sonra yeniden başlattığımda açılış süremde bir değişiklik olmadı fakat dmesg çıktısında uzun süreyle beklenilen adım değişti.

şöyle ki:

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-33-generic-pae (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #52-Ubuntu SMP Thu Oct 18 16:39:21 UTC 2012 (Ubuntu 3.2.0-33.52-generic-pae 3.2.31)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007feea000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007feea000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Sony Corporation VGN-FS315M, BIOS R0084J1 06/02/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 2  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 364e8000 - 3726c000
[    0.000000] ACPI: RSDP 000f74f0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 7fee5896 00044 (v01   Sony       J1 20060602 PTL  00000000)
[    0.000000] ACPI: APIC 7fee9e78 00068 (v01   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: FACP 7fee9ee0 00084 (v02   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: DSDT 7fee632b 03B4D (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: FACS 7fefafc0 00040
[    0.000000] ACPI: BOOT 7fee9fd8 00028 (v01   Sony       J1 20060602 PTL  00000001)
[    0.000000] ACPI: MCFG 7fee9f9c 0003C (v01   Sony       J1 20060602 PTL  0000005F)
[    0.000000] ACPI: SSDT 7fee6153 001D4 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee5d0e 00235 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee5af3 0021B (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: SSDT 7fee58da 00219 (v01   Sony       J1 20060602 PTL  20030224)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1154MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0007fee0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fee0
[    0.000000] On node 0 totalpages: 523887
[    0.000000] free_area_init_node: node 0, pgdat c1869140, node_mem_map f54e8200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2310 pages used for memmap
[    0.000000]   HighMem zone: 293340 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7bd5000 s34240 r0 d23104 u57344
[    0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519793
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-33-generic-pae root=UUID=68E47309E472D930 loop=/ubuntu/disks/root.disk ro ipv6.disable=1 quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8383744 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007fee0)
[    0.000000] Memory: 2045804k/2096000k available (5821k kernel code, 49744k reserved, 2845k data, 740k init, 1182600k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1877000 - 0xc1930000   ( 740 kB)
[    0.000000]       .data : 0xc15af47c - 0xc1876940   (2845 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15af47c   (5821 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1729.145 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.29 BogoMIPS (lpj=6916580)
[    0.004012] pid_max: default: 32768 minimum: 301
[    0.004047] Security Framework initialized
[    0.004081] AppArmor: AppArmor initialized
[    0.004084] Yama: becoming mindful.
[    0.004197] Mount-cache hash table entries: 512
[    0.004427] Initializing cgroup subsys cpuacct
[    0.004437] Initializing cgroup subsys memory
[    0.004452] Initializing cgroup subsys devices
[    0.004455] Initializing cgroup subsys freezer
[    0.004458] Initializing cgroup subsys blkio
[    0.004471] Initializing cgroup subsys perf_event
[    0.004508] Disabled fast string operations
[    0.004518] mce: CPU supports 5 MCE banks
[    0.004530] CPU0: Thermal monitoring enabled (TM2)
[    0.004931] SMP alternatives: switching to UP code
[    0.023709] ACPI: Core revision 20110623
[    0.032041] ftrace: allocating 26569 entries in 52 pages
[    0.036077] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036534] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.079466] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[    0.080004] Performance Events: p6 PMU driver.
[    0.080004] ... version:                0
[    0.080004] ... bit width:              32
[    0.080004] ... generic registers:      2
[    0.080004] ... value mask:             00000000ffffffff
[    0.080004] ... max period:             000000007fffffff
[    0.080004] ... fixed-purpose events:   0
[    0.080004] ... event mask:             0000000000000003
[    0.080004] NMI watchdog enabled, takes one hw-pmu counter.
[    0.080004] Brought up 1 CPUs
[    0.080004] Total of 1 processors activated (3458.29 BogoMIPS).
[    0.080004] devtmpfs: initialized
[    0.080004] EVM: security.selinux
[    0.080004] EVM: security.SMACK64
[    0.080004] EVM: security.capability
[    0.080004] PM: Registering ACPI NVS region at 7feea000 (90112 bytes)
[    0.080004] print_constraints: dummy:
[    0.080004] RTC time: 15:00:18, date: 12/16/12
[    0.080004] NET: Registered protocol family 16
[    0.080004] EISA bus registered
[    0.080004] ACPI: bus type pci registered
[    0.080004] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.080004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.080004] PCI: Using MMCONFIG for extended config space
[    0.080004] PCI: Using configuration type 1 for base access
[    0.081678] bio: create slab <bio-0> at 0
[    0.081793] ACPI: Added _OSI(Module Device)
[    0.081797] ACPI: Added _OSI(Processor Device)
[    0.081800] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.081803] ACPI: Added _OSI(Processor Aggregator Device)
[    0.083120] ACPI: EC: Look up EC in DSDT
[    0.188067] ACPI: Interpreter enabled
[    0.188078] ACPI: (supports S0 S3 S4 S5)
[    0.188105] ACPI: Using IOAPIC for interrupt routing
[    0.193567] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.193736] ACPI: No dock devices found.
[    0.193739] HEST: Table not found.
[    0.193745] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.194156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.194976] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.194980] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.194984] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.194988] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.194992] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.194995] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.195000] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
[    0.195014] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[    0.195070] pci 0000:00:01.0: [8086:2591] type 1 class 0x000604
[    0.195120] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.195125] pci 0000:00:01.0: PME# disabled
[    0.195193] pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403
[    0.195218] pci 0000:00:1b.0: reg 10: [mem 0x80000000-0x80003fff 64bit]
[    0.195326] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.195331] pci 0000:00:1b.0: PME# disabled
[    0.195359] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[    0.195418] pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
[    0.195463] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[    0.195522] pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
[    0.195567] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[    0.195626] pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
[    0.195670] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
[    0.195729] pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
[    0.195786] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[    0.195812] pci 0000:00:1d.7: reg 10: [mem 0x80004000-0x800043ff]
[    0.195921] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.195928] pci 0000:00:1d.7: PME# disabled
[    0.195952] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.196053] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[    0.196166] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.196176] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.196184] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.196212] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
[    0.196231] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.196245] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.196258] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.196271] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.196285] pci 0000:00:1f.1: reg 20: [io  0x1880-0x188f]
[    0.196335] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
[    0.196411] pci 0000:00:1f.3: reg 20: [io  0x18a0-0x18bf]
[    0.196513] pci 0000:01:00.0: [10de:0168] type 0 class 0x000300
[    0.196531] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xa0ffffff]
[    0.196549] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.196567] pci 0000:01:00.0: reg 1c: [mem 0x90000000-0x90ffffff 64bit]
[    0.196590] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.196661] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.196673] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.196679] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xafffffff]
[    0.196684] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.196743] pci 0000:06:03.0: [104c:ac8e] type 2 class 0x000607
[    0.196776] pci 0000:06:03.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.196828] pci 0000:06:03.0: supports D1 D2
[    0.196831] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196839] pci 0000:06:03.0: PME# disabled
[    0.196873] pci 0000:06:03.2: [104c:802e] type 0 class 0x000c00
[    0.196905] pci 0000:06:03.2: reg 10: [mem 0xb0004000-0xb00047ff]
[    0.196924] pci 0000:06:03.2: reg 14: [mem 0xb0000000-0xb0003fff]
[    0.197055] pci 0000:06:03.2: supports D1 D2
[    0.197058] pci 0000:06:03.2: PME# supported from D0 D1 D2 D3hot
[    0.197065] pci 0000:06:03.2: PME# disabled
[    0.197095] pci 0000:06:03.3: [104c:ac8f] type 0 class 0x000180
[    0.197127] pci 0000:06:03.3: reg 10: [mem 0xb0005000-0xb0005fff]
[    0.197272] pci 0000:06:03.3: supports D1 D2
[    0.197275] pci 0000:06:03.3: PME# supported from D0 D1 D2 D3hot
[    0.197282] pci 0000:06:03.3: PME# disabled
[    0.197320] pci 0000:06:04.0: [8086:4220] type 0 class 0x000280
[    0.197352] pci 0000:06:04.0: reg 10: [mem 0xb0006000-0xb0006fff]
[    0.197497] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
[    0.197504] pci 0000:06:04.0: PME# disabled
[    0.197539] pci 0000:06:08.0: [8086:1068] type 0 class 0x000200
[    0.197571] pci 0000:06:08.0: reg 10: [mem 0xb0007000-0xb0007fff]
[    0.197589] pci 0000:06:08.0: reg 14: [io  0x2000-0x203f]
[    0.197716] pci 0000:06:08.0: supports D1 D2
[    0.197719] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.197726] pci 0000:06:08.0: PME# disabled
[    0.197789] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[    0.197796] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.197802] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.197811] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.197815] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.197881] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[    0.197898] pci_bus 0000:00: on NUMA node 0
[    0.197903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.198144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.198254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.198394]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.198399]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.198402] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.202478] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.202551] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[    0.202620] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.202689] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.202758] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.202826] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.202896] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.202966] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.203144] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.203151] vgaarb: loaded
[    0.203153] vgaarb: bridge control possible 0000:01:00.0
[    0.203329] i2c-core: driver [aat2870] using legacy suspend method
[    0.203332] i2c-core: driver [aat2870] using legacy resume method
[    0.203443] SCSI subsystem initialized
[    0.203492] libata version 3.00 loaded.
[    0.203558] usbcore: registered new interface driver usbfs
[    0.203577] usbcore: registered new interface driver hub
[    0.203610] usbcore: registered new device driver usb
[    0.203738] PCI: Using ACPI for IRQ routing
[    0.214051] PCI: pci_cache_line_size set to 64 bytes
[    0.214149] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.214153] reserve RAM buffer: 000000007fee0000 - 000000007fffffff
[    0.214302] NetLabel: Initializing
[    0.214305] NetLabel:  domain hash size = 128
[    0.214307] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.214321] NetLabel:  unlabeled traffic allowed by default
[    0.214516] hpet clockevent registered
[    0.214522] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.214530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.214536] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.220059] Switching to clocksource hpet
[    0.232297] AppArmor: AppArmor Filesystem Enabled
[    0.232353] pnp: PnP ACPI init
[    0.232390] ACPI: bus type pnp registered
[    0.234357] pnp 00:00: [bus 00-ff]
[    0.234362] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.234366] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.234369] pnp 00:00: [io  0x0d00-0xffff window]
[    0.234373] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.234376] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.234379] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.234383] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.234386] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.234390] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.234393] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.234396] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.234400] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.234403] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.234407] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.234410] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.234413] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.234417] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.234420] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.234514] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.234755] pnp 00:01: [io  0x0000-0x001f]
[    0.234759] pnp 00:01: [io  0x0081-0x0091]
[    0.234762] pnp 00:01: [io  0x0093-0x009f]
[    0.234765] pnp 00:01: [io  0x00c0-0x00df]
[    0.234769] pnp 00:01: [dma 4]
[    0.234831] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.234844] pnp 00:02: [mem 0xff800000-0xffffffff]
[    0.234898] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.234947] pnp 00:03: [io  0x00f0]
[    0.234970] pnp 00:03: [irq 13]
[    0.235029] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.235063] pnp 00:04: [io  0x0061]
[    0.235066] pnp 00:04: [io  0x0063]
[    0.235069] pnp 00:04: [io  0x0065]
[    0.235071] pnp 00:04: [io  0x0067]
[    0.235074] pnp 00:04: [io  0x0070]
[    0.235077] pnp 00:04: [io  0x0080]
[    0.235079] pnp 00:04: [io  0x0092]
[    0.235082] pnp 00:04: [io  0x00b2-0x00b3]
[    0.235085] pnp 00:04: [io  0x0380-0x0383]
[    0.235088] pnp 00:04: [io  0x0800-0x080f]
[    0.235091] pnp 00:04: [io  0x1000-0x107f]
[    0.235094] pnp 00:04: [io  0x1180-0x11bf]
[    0.235097] pnp 00:04: [io  0x1640-0x164f]
[    0.235100] pnp 00:04: [io  0xfe00-0xfe7f]
[    0.235103] pnp 00:04: [io  0xfe80-0xfeff]
[    0.235106] pnp 00:04: [mem 0xf0008000-0xf000bfff]
[    0.235109] pnp 00:04: [mem 0xf0000000-0xf0003fff]
[    0.235112] pnp 00:04: [mem 0xf0005000-0xf0005fff]
[    0.235116] pnp 00:04: [mem 0xf0004000-0xf0004fff]
[    0.235119] pnp 00:04: [mem 0xe0000000-0xefffffff]
[    0.235237] system 00:04: [io  0x0380-0x0383] has been reserved
[    0.235241] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.235245] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.235249] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.235253] system 00:04: [io  0x1640-0x164f] has been reserved
[    0.235257] system 00:04: [io  0xfe00-0xfe7f] has been reserved
[    0.235261] system 00:04: [io  0xfe80-0xfeff] has been reserved
[    0.235266] system 00:04: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.235270] system 00:04: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.235275] system 00:04: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.235279] system 00:04: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.235283] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.235288] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.235318] pnp 00:05: [io  0x0070-0x0077]
[    0.235376] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.235395] pnp 00:06: [io  0x0060]
[    0.235398] pnp 00:06: [io  0x0064]
[    0.235407] pnp 00:06: [irq 1]
[    0.235470] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.235487] pnp 00:07: [irq 12]
[    0.235546] pnp 00:07: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.235575] pnp: PnP ACPI: found 8 devices
[    0.235577] ACPI: ACPI bus type pnp unregistered
[    0.235582] PnPBIOS: Disabled by ACPI PNP
[    0.273006] PCI: max bus depth: 2 pci_try_num: 3
[    0.273044] pci 0000:00:1e.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.273049] pci 0000:01:00.0: BAR 6: assigned [mem 0x91000000-0x9101ffff pref]
[    0.273054] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.273060] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xafffffff]
[    0.273064] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.273074] pci 0000:06:03.0: BAR 0: assigned [mem 0x88000000-0x88000fff]
[    0.273083] pci 0000:06:03.0: BAR 0: set to [mem 0x88000000-0x88000fff] (PCI address [0x88000000-0x88000fff])
[    0.273089] pci 0000:06:03.0: BAR 16: assigned [mem 0x8c000000-0x8fffffff]
[    0.273093] pci 0000:06:03.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.273097] pci 0000:06:03.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.273101] pci 0000:06:03.0: BAR 13: assigned [io  0x2800-0x28ff]
[    0.273104] pci 0000:06:03.0: CardBus bridge to [bus 07-0a]
[    0.273108] pci 0000:06:03.0:   bridge window [io  0x2800-0x28ff]
[    0.273115] pci 0000:06:03.0:   bridge window [io  0x2400-0x24ff]
[    0.273123] pci 0000:06:03.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.273131] pci 0000:06:03.0:   bridge window [mem 0x8c000000-0x8fffffff]
[    0.273138] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[    0.273143] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.273150] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.273157] pci 0000:00:1e.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.273184] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.273190] pci 0000:00:01.0: setting latency timer to 64
[    0.273200] pci 0000:00:1e.0: setting latency timer to 64
[    0.273210] pci 0000:06:03.0: enabling device (0000 -> 0003)
[    0.273217] pci 0000:06:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.273228] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.273231] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.273235] pci_bus 0000:01: resource 1 [mem 0x90000000-0xafffffff]
[    0.273239] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
[    0.273242] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.273246] pci_bus 0000:06: resource 1 [mem 0xb0000000-0xb00fffff]
[    0.273249] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.273253] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.273256] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.273260] pci_bus 0000:07: resource 0 [io  0x2800-0x28ff]
[    0.273263] pci_bus 0000:07: resource 1 [io  0x2400-0x24ff]
[    0.273267] pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.273270] pci_bus 0000:07: resource 3 [mem 0x8c000000-0x8fffffff]
[    0.273333] NET: Registered protocol family 2
[    0.273442] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.273775] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.274862] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.275554] TCP: Hash tables configured (established 131072 bind 65536)
[    0.275557] TCP reno registered
[    0.275564] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.275588] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.275751] NET: Registered protocol family 1
[    0.275822] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.275845] pci 0000:00:1d.0: PCI INT A disabled
[    0.275861] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.275881] pci 0000:00:1d.1: PCI INT B disabled
[    0.275903] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.275923] pci 0000:00:1d.2: PCI INT C disabled
[    0.275933] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.275953] pci 0000:00:1d.3: PCI INT D disabled
[    0.275965] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.276047] pci 0000:00:1d.7: PCI INT A disabled
[    0.276077] pci 0000:01:00.0: Boot video device
[    0.276114] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
[    0.276121] PCI: CLS 64 bytes, default 64
[    0.276219] Simple Boot Flag at 0x36 set to 0x1
[    0.276628] audit: initializing netlink socket (disabled)
[    0.276645] type=2000 audit(1355670018.272:1): initialized
[    0.306023] Trying to unpack rootfs image as initramfs...
[    0.340841] highmem bounce pool size: 64 pages
[    0.340851] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.352389] VFS: Disk quotas dquot_6.5.2
[    0.352506] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.353423] fuse init (API version 7.17)
[    0.353570] msgmni has been set to 1685
[    0.364222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.364260] io scheduler noop registered
[    0.364262] io scheduler deadline registered
[    0.364273] io scheduler cfq registered (default)
[    0.364452] pcieport 0000:00:01.0: setting latency timer to 64
[    0.364496] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.364607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.364650] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.365885] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.368208] ACPI: AC Adapter [ADP1] (on-line)
[    0.368330] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.368964] ACPI: Lid Switch [LID0]
[    0.369042] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.369050] ACPI: Power Button [PWRB]
[    0.369131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.369136] ACPI: Power Button [PWRF]
[    0.741328] Freeing initrd memory: 13840k freed
[    1.276059] Refined TSC clocksource calibration: 1729.169 MHz.
[    1.276072] Switching to clocksource tsc
[    1.368175] Marking TSC unstable due to TSC halts in idle
[    1.368189] ACPI: acpi_idle registered with cpuidle
[    1.368580] Switching to clocksource hpet
[    1.371666] thermal LNXTHERM:00: registered as thermal_zone0
[    1.371670] ACPI: Thermal Zone [THRM] (61 C)
[    1.371699] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.371713] ACPI: Battery Slot [BAT0] (battery present)
[    1.371787] ERST: Table is not found!
[    1.371790] GHES: HEST is not enabled!
[    1.372039] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.374511] Linux agpgart interface v0.103
[    1.376146] isapnp: Scanning for PnP cards...
[    1.383239] brd: module loaded
[    1.384628] loop: module loaded
[    1.428706] ata_piix 0000:00:1f.1: version 2.13
[    1.428728] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.428781] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.472904] scsi0 : ata_piix
[    1.473009] scsi1 : ata_piix
[    1.473608] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[    1.473612] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[    1.474218] Fixed MDIO Bus: probed
[    1.474250] tun: Universal TUN/TAP device driver, 1.6
[    1.474253] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.474329] PPP generic driver version 2.4.2
[    1.474463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.474489] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.474517] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.474521] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.474584] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.474623] ehci_hcd 0000:00:1d.7: debug port 1
[    1.478502] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.478698] ata2: port disabled--ignoring
[    1.478741] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x80004000
[    1.482621] ACPI: Battery Slot [BAT0] (battery present)
[    1.526297] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.570167] hub 1-0:1.0: USB hub found
[    1.570173] hub 1-0:1.0: 8 ports detected
[    1.570298] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.570319] uhci_hcd: USB Universal Host Controller Interface driver
[    1.570349] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.570359] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.570364] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.570416] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.570446] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[    1.570629] hub 2-0:1.0: USB hub found
[    1.570634] hub 2-0:1.0: 2 ports detected
[    1.570730] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.570740] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.570745] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.570803] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.570846] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    1.571033] hub 3-0:1.0: USB hub found
[    1.571038] hub 3-0:1.0: 2 ports detected
[    1.571133] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.571143] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.571147] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.571207] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.571249] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.571437] hub 4-0:1.0: USB hub found
[    1.571442] hub 4-0:1.0: 2 ports detected
[    1.571535] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.571545] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.571549] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.571606] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.571648] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    1.571844] hub 5-0:1.0: USB hub found
[    1.571850] hub 5-0:1.0: 2 ports detected
[    1.572036] usbcore: registered new interface driver libusual
[    1.572096] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.576290] i8042: Detected active multiplexing controller, rev 1.1
[    1.579630] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.579638] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.579682] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.579720] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.579762] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.579928] mousedev: PS/2 mouse device common for all mice
[    1.580172] rtc_cmos 00:05: RTC can wake from S4
[    1.580316] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.580350] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.580440] device-mapper: uevent: version 1.0.3
[    1.580552] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.580606] EISA: Probing bus 0 at eisa.0
[    1.580615] Cannot allocate resource for EISA slot 1
[    1.580618] Cannot allocate resource for EISA slot 2
[    1.580652] EISA: Detected 0 cards.
[    1.580667] cpufreq-nforce2: No nForce2 chipset.
[    1.580710] cpuidle: using governor ladder
[    1.580770] cpuidle: using governor menu
[    1.580773] EFI Variables Facility v0.08 2004-May-17
[    1.581134] TCP cubic registered
[    1.581137] IPv6: Loaded, but administratively disabled, reboot required to enable
[    1.581142] NET: Registered protocol family 17
[    1.581151] Registering the dns_resolver key type
[    1.581181] Using IPI No-Shortcut mode
[    1.581308] PM: Hibernation image not present or could not be loaded.
[    1.581325] registered taskstats version 1
[    1.720501]   Magic number: 8:790:32
[    1.720631] rtc_cmos 00:05: setting system clock to 2012-12-16 15:00:20 UTC (1355670020)
[    1.720884] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.720887] EDD information not available.
[    1.765379] isapnp: No Plug & Play device found
[    1.766011] ata1.00: ATA-7: HTS421280H9AT00, HA3OA70G, max UDMA/100
[    1.766016] ata1.00: 156301488 sectors, multi 16: LBA48
[    1.766023] ata1.01: ATAPI: TOSHIBA CD/DVDW SDR6472U, TU02, max UDMA/33
[    1.780530] ata1.00: configured for UDMA/100
[    1.782937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.812364] ata1.01: configured for UDMA/33
[    1.813268] scsi 0:0:0:0: Direct-Access     ATA      HTS421280H9AT00  HA3O PQ: 0 ANSI: 5
[    1.813507] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.817095] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.820471] scsi 0:0:1:0: CD-ROM            TOSHIBA  CD/DVDW SDR6472U TU02 PQ: 0 ANSI: 5
[    1.825516] sd 0:0:0:0: [sda] Write Protect is off
[    1.825520] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.825535] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.825539] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.825724] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.825832] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.825953] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.895778]  sda: sda1 sda2 < sda5 sda6 >
[    1.896237] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.896307] Freeing unused kernel memory: 740k freed
[    1.896699] Write protecting the kernel text: 5824k
[    1.896720] Write protecting the kernel read-only data: 2376k
[    1.896722] NX-protecting the kernel data: 4416k
[    1.933165] udevd[100]: starting version 175
[    2.115362] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    2.115366] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.115440] e100 0000:06:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.216444] e100 0000:06:08.0: PME# disabled
[    2.216750] e100 0000:06:08.0: eth0: addr 0xb0007000, irq 20, MAC addr 00:01:4a:c3:c9:da
[    2.216791] firewire_ohci 0000:06:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.272099] firewire_ohci: Added fw-ohci device 0000:06:03.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    2.772764] firewire_core: created device fw0: GUID 0800460301f1c01f, S400
[    3.006774] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[   35.098150] udevd[334]: starting version 175
[   35.211483] lp: driver loaded but no devices found
[   35.998186] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input4
[   35.998299] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[   36.056087] intel_rng: FWH not detected
[   36.129808] lib80211: common routines for IEEE802.11 drivers
[   36.129813] lib80211_crypt: registered algorithm 'NULL'
[   36.235469] sony_laptop: Sony Notebook Control Driver v0.6
[   36.235757] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/SNY5001:00/input/input5
[   36.235987] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[   36.420428] cfg80211: Calling CRDA to update world regulatory domain
[   36.704823] yenta_cardbus 0000:06:03.0: CardBus bridge found [104d:818f]
[   36.704854] yenta_cardbus 0000:06:03.0: Using CSCINT to route CSC interrupts to PCI
[   36.704858] yenta_cardbus 0000:06:03.0: Routing CardBus interrupts to PCI
[   36.704866] yenta_cardbus 0000:06:03.0: TI: mfunc 0x01001b22, devctl 0x64
[   36.936859] yenta_cardbus 0000:06:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   36.936866] yenta_cardbus 0000:06:03.0: Socket status: 30000006
[   36.936871] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   36.936884] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[   36.936889] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x203f 0x23b0-0x23df 0x2400-0x24ff 0x27b0-0x27df 0x2800-0x28ff 0x2bb0-0x2bdf 0x2fb0-0x2fdf
[   36.944475] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0xb0000000-0xb00fffff]
[   36.944480] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0000000-0xb00fffff: excluding 0xb0000000-0xb000ffff
[   36.944498] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x87ffffff pref]
[   36.944502] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x87ffffff: excluding 0x84000000-0x87ffffff
[   37.211703] tifm_7xx1 0000:06:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   37.236035] tifm_core: MMC/SD card detected in socket 0:0
[   37.307885] libipw: 802.11 data/management/control stack, git-1.1.13
[   37.307890] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   37.344434] cfg80211: World regulatory domain updated:
[   37.344440] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   37.344444] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.344448] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.344452] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.344456] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.344459] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.391166] type=1400 audit(1355662856.166:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=798 comm="apparmor_parser"
[   37.392605] type=1400 audit(1355662856.170:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=799 comm="apparmor_parser"
[   37.394227] type=1400 audit(1355662856.170:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser"
[   37.394593] type=1400 audit(1355662856.170:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=798 comm="apparmor_parser"
[   37.395424] type=1400 audit(1355662856.170:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=799 comm="apparmor_parser"
[   37.395779] type=1400 audit(1355662856.170:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=799 comm="apparmor_parser"
[   37.492153] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   37.492158] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   37.492306] ipw2200 0000:06:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   37.492342] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   37.494699] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x380-0x387
[   37.496997] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   37.498087] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   37.498911] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   37.499827] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xdc000-0xfffff
[   37.499865] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[   37.499901] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   37.499934] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   37.726413] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
[   37.744888] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
[   37.993576] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   37.993649] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[   37.993686] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   38.459006] cfg80211: failed to add phy80211 symlink to netdev!
[   38.459194] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   38.459199] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459202] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   38.459206] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459210] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   38.459214] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459217] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   38.459221] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459224] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   38.459228] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459231] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   38.459235] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459238] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   38.459242] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459245] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   38.459249] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459253] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   38.459256] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459260] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   38.459264] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459267] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   38.459271] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.459274] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   38.459278] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.459281] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   38.459285] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.459378] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   38.561981] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.585631] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   39.119859] nvidia: module license 'NVIDIA' taints kernel.
[   39.119863] Disabling lock debugging due to kernel taint
[   39.786200] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   39.786213] nvidia 0000:01:00.0: setting latency timer to 64
[   39.786220] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   39.791293] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.43  Sun Aug 19 20:20:21 PDT 2012
[   41.005845] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   41.005850] vesafb: scrolling: redraw
[   41.005853] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   41.007034] vesafb: framebuffer at 0xc0000000, mapped to 0xf8700000, using 1216k, total 1216k
[   41.007392] fbcon: VESA VGA (fb0) is primary device
[   41.007482] Console: switching to colour frame buffer device 80x30
[   41.007504] fb0: VESA VGA frame buffer device
[   42.167918] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k
[   42.222688] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   42.472605] init: failsafe main process (1025) killed by TERM signal
[   42.493993] ppdev: user-space parallel port driver
[   42.564412] Bluetooth: Core ver 2.16
[   42.564437] NET: Registered protocol family 31
[   42.564439] Bluetooth: HCI device and connection manager initialized
[   42.564443] Bluetooth: HCI socket layer initialized
[   42.564446] Bluetooth: L2CAP socket layer initialized
[   42.564453] Bluetooth: SCO socket layer initialized
[   42.591950] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   42.591955] Bluetooth: BNEP filters: protocol multicast
[   42.648973] type=1400 audit(1355662861.426:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1095 comm="apparmor_parser"
[   42.649020] Bluetooth: RFCOMM TTY layer initialized
[   42.649026] Bluetooth: RFCOMM socket layer initialized
[   42.649028] Bluetooth: RFCOMM ver 1.11
[   42.656707] type=1400 audit(1355662861.434:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1095 comm="apparmor_parser"
[   42.794688] type=1400 audit(1355662861.570:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1140 comm="apparmor_parser"
[   42.799226] type=1400 audit(1355662861.574:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1141 comm="apparmor_parser"
[   42.810656] type=1400 audit(1355662861.586:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1141 comm="apparmor_parser"
[   42.811024] type=1400 audit(1355662861.586:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1141 comm="apparmor_parser"
[   42.852130] type=1400 audit(1355662861.630:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1145 comm="apparmor_parser"
[   42.879884] type=1400 audit(1355662861.654:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1145 comm="apparmor_parser"
[   42.889905] type=1400 audit(1355662861.666:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1145 comm="apparmor_parser"
[   42.892982] type=1400 audit(1355662861.670:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1145 comm="apparmor_parser"
[   45.107387] NVRM: Your system is not currently configured to drive a VGA console
[   45.107393] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   45.107397] NVRM: requires the use of a text-mode VGA console. Use of other console
[   45.107400] NVRM: drivers including, but not limited to, vesafb, may result in
[   45.107404] NVRM: corruption and stability problems, and is not supported.
[   46.600094] lib80211_crypt: registered algorithm 'TKIP'


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 16 Aralık 2012 - 15:09:08
network-manager'ı tamamen kaldırıp elle bağlantıyı deneyeyim. o zaman belki bir değişiklik olabilir.

[if]

@ozdemirbrhm,

Kod Seç Genişlet

echo "alias parport_lowlevel parport_pc" | sudo tee /etc/modprobe.d/lp.conf komutunu uyguladıktan sonra tekrar başlatın. BIOS'ta iki tane kablosuz arayüzünün olup olmadığına bakın, varsa birini kapatın.