[Çözüldü] güncelleme sonrası usb harici diskler görünmüyor!!!

[matiloglu]

Arkadaşlar dün sistememi güncelleştirdim. maverick 10.10 kullanıyorum, sanırım kernel güncellemesi oldu, acemiym kuura bakmayın. 36.25 e yükseldi muhtemelen, fakat düne kadar çalışan usb harici diskler çalışmaz oldu. hiç bi şekilde görmüyor. gparted tada media klasöründede görememekteyim.

çıktılar;

Kod Seç Genişlet

matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ df -h
Dosyasistemi            Boyut Kullanılan Mevcut Kullanım % Bağlanılan yer
/dev/sda2              23G  9,7G   13G  45% /
none                 1001M  264K 1001M   1% /dev
none                 1007M  1,2M 1005M   1% /dev/shm
none                 1007M  224K 1006M   1% /var/run
none                 1007M     0 1007M   0% /var/lock


Kod Seç Genişlet

matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ dmesg | tail
[ 1013.972043] usb 4-2: new full speed USB device using ohci_hcd and address 7
[ 1090.764020] lo: Disabled Privacy Extensions
[ 1881.508517] Bluetooth: Core ver 2.15
[ 1881.510026] NET: Registered protocol family 31
[ 1881.510031] Bluetooth: HCI device and connection manager initialized
[ 1881.510036] Bluetooth: HCI socket layer initialized
[ 1923.648409] usb 4-2: USB disconnect, address 7
[ 1939.532042] usb 1-3: new high speed USB device using ehci_hcd and address 8
[ 3756.952285] usb 1-3: USB disconnect, address 8
[ 3766.652152] usb 1-3: new high speed USB device using ehci_hcd and address 9

Kod Seç Genişlet

matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ lsusb
Bus 005 Device 002: ID 046d:c525 Logitech, Inc. MX Revolution Cordless Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 009: ID 1058:0702 Western Digital Technologies, Inc. Passport External HDD
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Kod Seç Genişlet

matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ sudo fdisk -l
[sudo] password for matiloglu:

Disk /dev/sda: 60.0 GB, 60011642880 bayt
255 heads, 63 sectors/track, 7296 cylinders
Units = silindir of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk kimlikleyicisi: 0x994a994a

   Aygıt Açılış    Başlangıç     Bitiş  BlokSayısı Kml Sistem
/dev/sda1   *           1        3824    30716248+   7  HPFS/NTFS
/dev/sda2            3825        6864    24413184   83  Linux
/dev/sda3            6864        7296     3473409    5  Ek
/dev/sda5            6864        7296     3473408   82  Linux takas / Solaris

şimdiden teşekkürler!

[bytan]

Kullandığın sürüm nedir? Özellikle dmesg çıktısını aygıtı taktıktan sonra alıp tamamını aktar bize:

Kod Seç Genişlet

cat /etc/lsb-release
uname -r
dmesg


Merakımdan sorayım, matiloglu-Pavilion-zx5000-DS474U-ABA tanımlamasını sen mi yaptın, makina kendi mi verdi?

[matiloglu]

sanırım gnome dan bahsediyorsun, sürüm: 2.32 yazıyor.
evet makine yazdı, ben bişey yapmadım.

çıktılar;

Kod Seç Genişlet

matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.10
DISTRIB_CODENAME=maverick
DISTRIB_DESCRIPTION="Ubuntu 10.10"

Kod Seç Genişlet

matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ uname -r
2.6.35-25-generic

Kod Seç Genişlet

matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-25-generic (buildd@roseapple) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #43-Ubuntu SMP Thu Jan 6 22:25:16 UTC 2011 (Ubuntu 2.6.35-25.43-generic 2.6.35.10)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
[    0.000000]  BIOS-e820: 000000007ff70000 - 000000007ff7d000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ff7d000 - 000000007ff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 000000008ff80000 - 0000000090000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7ff70 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF80000 mask FFFF80000 uncachable
[    0.000000]   2 base 08FF80000 mask FFFF80000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
[    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d0000 - 00000000000d8000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007ff70000 (usable)
[    0.000000]  modified: 000000007ff70000 - 000000007ff7d000 (ACPI data)
[    0.000000]  modified: 000000007ff7d000 - 000000007ff80000 (ACPI NVS)
[    0.000000]  modified: 000000007ff80000 - 0000000080000000 (reserved)
[    0.000000]  modified: 000000008ff80000 - 0000000090000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] found SMP MP-table at [c00f6470] f6470
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 37574000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 009a7000 - 0142260a
[    0.000000] Move RAMDISK from 0000000037574000 - 0000000037fef609 to 009a7000 - 01422609
[    0.000000] ACPI: RSDP 000f6500 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 7ff79115 00030 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 7ff7ce7d 00074 (v01 HP     Chinook  06040000 ATI  000F4240)
[    0.000000] ACPI: DSDT 7ff79145 03D38 (v01     HP    SB200 06040000 INTL 20030509)
[    0.000000] ACPI: FACS 7ff7ffc0 00040
[    0.000000] ACPI: SSDT 7ff7cef1 000B5 (v01 PTLTD  ACPIPST1 06040000  LTP 00000001)
[    0.000000] ACPI: APIC 7ff7cfa6 0005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1159MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007ff70
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x00000002
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ff70
[    0.000000] On node 0 totalpages: 524032
[    0.000000] free_area_init_node: node 0, pgdat c07fffc0, node_mem_map c1424020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2319 pages used for memmap
[    0.000000]   HighMem zone: 294499 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36416 r0 d20928 u4194304
[    0.000000] pcpu-alloc: s36416 r0 d20928 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519937
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic root=UUID=c562ce2d-f654-498f-9321-0ac54e31771a ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10482860 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Subtract (50 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000100000 - 00009a2adc]   TEXT DATA BSS
[    0.000000]   #3 [00009a3000 - 00009a6133]             BRK
[    0.000000]   #4 [00000f6480 - 0000100000]   BIOS reserved
[    0.000000]   #5 [00000f6470 - 00000f6480]    MP-table mpf
[    0.000000]   #6 [000009f800 - 000009fd70]   BIOS reserved
[    0.000000]   #7 [000009fea8 - 00000f6470]   BIOS reserved
[    0.000000]   #8 [000009fd70 - 000009fea8]    MP-table mpc
[    0.000000]   #9 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #10 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #11 [0000015000 - 0000016000]         PGTABLE
[    0.000000]   #12 [00009a7000 - 0001423000]     NEW RAMDISK
[    0.000000]   #13 [0001423000 - 0001424000]         BOOTMEM
[    0.000000]   #14 [0001424000 - 0002424000]         BOOTMEM
[    0.000000]   #15 [0002424000 - 0002424004]         BOOTMEM
[    0.000000]   #16 [0002424040 - 0002424100]         BOOTMEM
[    0.000000]   #17 [0002424100 - 0002424154]         BOOTMEM
[    0.000000]   #18 [0002424180 - 0002427180]         BOOTMEM
[    0.000000]   #19 [0002427180 - 00024271f0]         BOOTMEM
[    0.000000]   #20 [0002427200 - 000242d200]         BOOTMEM
[    0.000000]   #21 [000242d200 - 000242d227]         BOOTMEM
[    0.000000]   #22 [000242d240 - 000242d3e4]         BOOTMEM
[    0.000000]   #23 [000242d400 - 000242d440]         BOOTMEM
[    0.000000]   #24 [000242d440 - 000242d480]         BOOTMEM
[    0.000000]   #25 [000242d480 - 000242d4c0]         BOOTMEM
[    0.000000]   #26 [000242d4c0 - 000242d500]         BOOTMEM
[    0.000000]   #27 [000242d500 - 000242d540]         BOOTMEM
[    0.000000]   #28 [000242d540 - 000242d580]         BOOTMEM
[    0.000000]   #29 [000242d580 - 000242d5c0]         BOOTMEM
[    0.000000]   #30 [000242d5c0 - 000242d600]         BOOTMEM
[    0.000000]   #31 [000242d600 - 000242d640]         BOOTMEM
[    0.000000]   #32 [000242d640 - 000242d680]         BOOTMEM
[    0.000000]   #33 [000242d680 - 000242d6c0]         BOOTMEM
[    0.000000]   #34 [000242d6c0 - 000242d700]         BOOTMEM
[    0.000000]   #35 [000242d700 - 000242d710]         BOOTMEM
[    0.000000]   #36 [000242d740 - 000242d750]         BOOTMEM
[    0.000000]   #37 [000242d780 - 000242d7ea]         BOOTMEM
[    0.000000]   #38 [000242d800 - 000242d86a]         BOOTMEM
[    0.000000]   #39 [0002800000 - 000280e000]         BOOTMEM
[    0.000000]   #40 [000242f880 - 000242f884]         BOOTMEM
[    0.000000]   #41 [000242f8c0 - 000242f8c4]         BOOTMEM
[    0.000000]   #42 [000242f900 - 000242f904]         BOOTMEM
[    0.000000]   #43 [000242f940 - 000242f944]         BOOTMEM
[    0.000000]   #44 [000242f980 - 000242fa30]         BOOTMEM
[    0.000000]   #45 [000242fa40 - 000242fae8]         BOOTMEM
[    0.000000]   #46 [000242fb00 - 0002433b00]         BOOTMEM
[    0.000000]   #47 [0002433b00 - 00024b3b00]         BOOTMEM
[    0.000000]   #48 [00024b3b00 - 00024f3b00]         BOOTMEM
[    0.000000]   #49 [000280e000 - 000320d4ac]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000377fe:0007ff70)
[    0.000000] Memory: 2048992k/2096576k available (4933k kernel code, 47136k reserved, 2331k data, 688k init, 1187272k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0819000 - 0xc08c5000   ( 688 kB)
[    0.000000]       .data : 0xc05d17ce - 0xc08187a8   (2331 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05d17ce   (4933 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU-based detection of stalled CPUs is disabled.
[    0.000000] Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3066.670 MHz processor.
[    0.008011] Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.34 BogoMIPS (lpj=12266680)
[    0.008020] pid_max: default: 32768 minimum: 301
[    0.008058] Security Framework initialized
[    0.008100] AppArmor: AppArmor initialized
[    0.008103] Yama: becoming mindful.
[    0.008189] Mount-cache hash table entries: 512
[    0.008405] Initializing cgroup subsys ns
[    0.008412] Initializing cgroup subsys cpuacct
[    0.008418] Initializing cgroup subsys memory
[    0.008431] Initializing cgroup subsys devices
[    0.008434] Initializing cgroup subsys freezer
[    0.008438] Initializing cgroup subsys net_cls
[    0.008483] CPU0: Hyper-Threading is disabled
[    0.008488] mce: CPU supports 4 MCE banks
[    0.008502] CPU0: Thermal monitoring enabled (TM1)
[    0.008521] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.008536] ... version:                0
[    0.008538] ... bit width:              40
[    0.008540] ... generic registers:      18
[    0.008543] ... value mask:             000000ffffffffff
[    0.008546] ... max period:             0000007fffffffff
[    0.008548] ... fixed-purpose events:   0
[    0.008551] ... event mask:             000000000003ffff
[    0.013095] SMP alternatives: switching to UP code
[    0.024184] Freeing SMP alternatives: 24k freed
[    0.024221] ACPI: Core revision 20100428
[    0.032011] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.032020] ftrace: allocating 21756 entries in 43 pages
[    0.036124] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.040000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.040000] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.040000] ..... (found apic 0 pin 2) ...
[    0.080475] ....... works.
[    0.080478] CPU0: Mobile Intel(R) Pentium(R) 4     CPU 3.06GHz stepping 09
[    0.084000] Brought up 1 CPUs
[    0.084000] Total of 1 processors activated (6133.34 BogoMIPS).
[    0.084000] devtmpfs: initialized
[    0.084000] regulator: core version 0.5
[    0.084000] Time: 17:18:11  Date: 01/18/11
[    0.084000] NET: Registered protocol family 16
[    0.084000] EISA bus registered
[    0.084000] ACPI: bus type pci registered
[    0.084000] PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
[    0.084000] PCI: Using configuration type 1 for base access
[    0.084000] bio: create slab <bio-0> at 0
[    0.084666] ACPI: EC: Look up EC in DSDT
[    0.087312] ACPI: Interpreter enabled
[    0.087321] ACPI: (supports S0 S3 S4 S5)
[    0.087345] ACPI: BIOS offers _GTS
[    0.087347] ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
[    0.087353] ACPI: Using IOAPIC for interrupt routing
[    0.140197] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[    0.140366] ACPI: No dock devices found.
[    0.140373] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.141477] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.143643] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.143648] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.143651] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    0.143654] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[    0.143657] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.143660] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.143685] pci 0000:00:00.0: reg 10: [mem 0xea000000-0xebffffff pref]
[    0.143690] pci 0000:00:00.0: reg 14: [mem 0xe8000000-0xe8000fff]
[    0.143778] pci 0000:00:13.0: reg 10: [mem 0xe8001000-0xe8001fff]
[    0.143819] pci 0000:00:13.1: reg 10: [mem 0xe8002000-0xe8002fff]
[    0.143864] pci 0000:00:14.0: reg 10: [io  0x8040-0x804f]
[    0.143870] pci 0000:00:14.0: reg 14: [mem 0x00000000-0x000003ff]
[    0.143909] pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]
[    0.143915] pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]
[    0.143920] pci 0000:00:14.1: reg 18: [io  0x0170-0x0177]
[    0.143926] pci 0000:00:14.1: reg 1c: [io  0x0374-0x0377]
[    0.143932] pci 0000:00:14.1: reg 20: [io  0x8060-0x806f]
[    0.144037] pci 0000:00:14.5: reg 10: [mem 0xe8003000-0xe80030ff]
[    0.144077] pci 0000:00:14.6: reg 10: [mem 0xe8003400-0xe80034ff]
[    0.144150] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.144156] pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
[    0.144162] pci 0000:01:05.0: reg 18: [mem 0xe8100000-0xe810ffff]
[    0.144177] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.144197] pci 0000:01:05.0: supports D1 D2
[    0.144228] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.144235] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.144239] pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
[    0.144245] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.144280] pci 0000:02:00.0: reg 10: [mem 0xe8208000-0xe82087ff]
[    0.144288] pci 0000:02:00.0: reg 14: [mem 0xe8200000-0xe8203fff]
[    0.144333] pci 0000:02:00.0: supports D1 D2
[    0.144336] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.144341] pci 0000:02:00.0: PME# disabled
[    0.144365] pci 0000:02:02.0: reg 10: [mem 0xe8204000-0xe8205fff]
[    0.144429] pci 0000:02:03.0: reg 10: [io  0xa000-0xa0ff]
[    0.144437] pci 0000:02:03.0: reg 14: [mem 0xe8208800-0xe82088ff]
[    0.144481] pci 0000:02:03.0: supports D1 D2
[    0.144483] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[    0.144487] pci 0000:02:03.0: PME# disabled
[    0.144520] pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.144540] pci 0000:02:04.0: supports D1 D2
[    0.144543] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144547] pci 0000:02:04.0: PME# disabled
[    0.144580] pci 0000:02:04.1: reg 10: [mem 0x00000000-0x00000fff]
[    0.144600] pci 0000:02:04.1: supports D1 D2
[    0.144602] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144607] pci 0000:02:04.1: PME# disabled
[    0.144636] pci 0000:02:04.2: reg 10: [io  0xa400-0xa43f]
[    0.144720] pci 0000:02:07.0: reg 10: [mem 0xe8206000-0xe8206fff]
[    0.144766] pci 0000:02:07.0: supports D1 D2
[    0.144768] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144772] pci 0000:02:07.0: PME# disabled
[    0.144803] pci 0000:02:07.1: reg 10: [mem 0xe8207000-0xe8207fff]
[    0.144849] pci 0000:02:07.1: supports D1 D2
[    0.144851] pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144856] pci 0000:02:07.1: PME# disabled
[    0.144885] pci 0000:02:07.2: reg 10: [mem 0xe8208c00-0xe8208cff]
[    0.144931] pci 0000:02:07.2: supports D1 D2
[    0.144933] pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144938] pci 0000:02:07.2: PME# disabled
[    0.144983] pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
[    0.144989] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.144993] pci 0000:00:14.4:   bridge window [mem 0xe8200000-0xe82fffff]
[    0.144999] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.145002] pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.145005] pci 0000:00:14.4:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.145079] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04]
[    0.145092] pci_bus 0000:00: on NUMA node 0
[    0.145096] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.145185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.145260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.147659] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled.
[    0.147777] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled.
[    0.147895] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled.
[    0.148030] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled.
[    0.148073] HEST: Table is not found!
[    0.148185] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.148195] vgaarb: loaded
[    0.148415] SCSI subsystem initialized
[    0.148512] libata version 3.00 loaded.
[    0.148583] usbcore: registered new interface driver usbfs
[    0.148599] usbcore: registered new interface driver hub
[    0.148639] usbcore: registered new device driver usb
[    0.148874] ACPI: WMI: Mapper loaded
[    0.148877] PCI: Using ACPI for IRQ routing
[    0.148883] PCI: pci_cache_line_size set to 64 bytes
[    0.148967] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[    0.148972] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.148976] reserve RAM buffer: 000000007ff70000 - 000000007fffffff
[    0.149112] NetLabel: Initializing
[    0.149114] NetLabel:  domain hash size = 128
[    0.149116] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.149133] NetLabel:  unlabeled traffic allowed by default
[    0.149202] Switching to clocksource tsc
[    0.162147] AppArmor: AppArmor Filesystem Enabled
[    0.162184] pnp: PnP ACPI init
[    0.162223] ACPI: bus type pnp registered
[    0.186799] pnp: PnP ACPI: found 10 devices
[    0.186803] ACPI: ACPI bus type pnp unregistered
[    0.186808] PnPBIOS: Disabled by ACPI PNP
[    0.186827] system 00:07: [io  0x0200-0x020f] has been reserved
[    0.186831] system 00:07: [io  0x0c14] has been reserved
[    0.186834] system 00:07: [io  0x0c50-0x0c52] has been reserved
[    0.186837] system 00:07: [io  0x0c6c] has been reserved
[    0.186840] system 00:07: [io  0x0c6f] has been reserved
[    0.186843] system 00:07: [io  0x0cd6-0x0cd7] has been reserved
[    0.186846] system 00:07: [io  0x1080] has been reserved
[    0.186849] system 00:07: [io  0x8000-0x803f] has been reserved
[    0.186851] system 00:07: [io  0x8800] has been reserved
[    0.186854] system 00:07: [io  0xfe00] has been reserved
[    0.186857] system 00:07: [io  0xfe10-0xfe11] has been reserved
[    0.186862] system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved
[    0.186865] system 00:07: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.186869] system 00:07: [mem 0xe8000000-0xe8000fff] has been reserved
[    0.186872] system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
[    0.223294] pci 0000:00:14.4: BAR 15: assigned [mem 0x90000000-0x97ffffff pref]
[    0.223299] pci 0000:00:14.0: BAR 1: assigned [mem 0x98000000-0x980003ff]
[    0.223306] pci 0000:00:14.0: BAR 1: set to [mem 0x98000000-0x980003ff] (PCI address [0x98000000-0x980003ff]
[    0.223310] pci 0000:01:05.0: BAR 6: assigned [mem 0xe8120000-0xe813ffff pref]
[    0.223314] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.223318] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.223322] pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
[    0.223326] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.223334] pci 0000:02:04.0: BAR 15: assigned [mem 0x90000000-0x93ffffff pref]
[    0.223338] pci 0000:02:04.0: BAR 16: assigned [mem 0x9c000000-0x9fffffff]
[    0.223341] pci 0000:02:04.1: BAR 15: assigned [mem 0x94000000-0x97ffffff pref]
[    0.223345] pci 0000:02:04.1: BAR 16: assigned [mem 0xa0000000-0xa3ffffff]
[    0.223348] pci 0000:02:04.0: BAR 0: assigned [mem 0xe8209000-0xe8209fff]
[    0.223354] pci 0000:02:04.0: BAR 0: set to [mem 0xe8209000-0xe8209fff] (PCI address [0xe8209000-0xe8209fff]
[    0.223358] pci 0000:02:04.1: BAR 0: assigned [mem 0xe820a000-0xe820afff]
[    0.223363] pci 0000:02:04.1: BAR 0: set to [mem 0xe820a000-0xe820afff] (PCI address [0xe820a000-0xe820afff]
[    0.223367] pci 0000:02:04.0: BAR 13: assigned [io  0xa800-0xa8ff]
[    0.223370] pci 0000:02:04.0: BAR 14: assigned [io  0xac00-0xacff]
[    0.223374] pci 0000:02:04.1: BAR 13: assigned [io  0x1400-0x14ff]
[    0.223378] pci 0000:02:04.1: BAR 14: assigned [io  0x1800-0x18ff]
[    0.223381] pci 0000:02:04.0: CardBus bridge to [bus 03-03]
[    0.223384] pci 0000:02:04.0:   bridge window [io  0xa800-0xa8ff]
[    0.223388] pci 0000:02:04.0:   bridge window [io  0xac00-0xacff]
[    0.223393] pci 0000:02:04.0:   bridge window [mem 0x90000000-0x93ffffff pref]
[    0.223398] pci 0000:02:04.0:   bridge window [mem 0x9c000000-0x9fffffff]
[    0.223403] pci 0000:02:04.1: CardBus bridge to [bus 04-07]
[    0.223405] pci 0000:02:04.1:   bridge window [io  0x1400-0x14ff]
[    0.223410] pci 0000:02:04.1:   bridge window [io  0x1800-0x18ff]
[    0.223414] pci 0000:02:04.1:   bridge window [mem 0x94000000-0x97ffffff pref]
[    0.223419] pci 0000:02:04.1:   bridge window [mem 0xa0000000-0xa3ffffff]
[    0.223424] pci 0000:00:14.4: PCI bridge to [bus 02-04]
[    0.223427] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.223432] pci 0000:00:14.4:   bridge window [mem 0xe8200000-0xe82fffff]
[    0.223436] pci 0000:00:14.4:   bridge window [mem 0x90000000-0x97ffffff pref]
[    0.223469]   alloc irq_desc for 17 on node -1
[    0.223471]   alloc kstat_irqs on node -1
[    0.223481] pci 0000:02:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.223493]   alloc irq_desc for 16 on node -1
[    0.223495]   alloc kstat_irqs on node -1
[    0.223500] pci 0000:02:04.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.223508] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.223512] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.223517] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.223521] pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]
[    0.223525] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[    0.223530] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.223534] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe82fffff]
[    0.223538] pci_bus 0000:02: resource 2 [mem 0x90000000-0x97ffffff pref]
[    0.223543] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.223547] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.223551] pci_bus 0000:03: resource 0 [io  0xa800-0xa8ff]
[    0.223554] pci_bus 0000:03: resource 1 [io  0xac00-0xacff]
[    0.223557] pci_bus 0000:03: resource 2 [mem 0x90000000-0x93ffffff pref]
[    0.223560] pci_bus 0000:03: resource 3 [mem 0x9c000000-0x9fffffff]
[    0.223563] pci_bus 0000:04: resource 0 [io  0x1400-0x14ff]
[    0.223566] pci_bus 0000:04: resource 1 [io  0x1800-0x18ff]
[    0.223569] pci_bus 0000:04: resource 2 [mem 0x94000000-0x97ffffff pref]
[    0.223572] pci_bus 0000:04: resource 3 [mem 0xa0000000-0xa3ffffff]
[    0.223636] NET: Registered protocol family 2
[    0.223721] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.224159] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.225543] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.226490] TCP: Hash tables configured (established 131072 bind 65536)
[    0.226497] TCP reno registered
[    0.226510] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.226544] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.226755] NET: Registered protocol family 1
[    0.226899] pci 0000:01:05.0: Boot video device
[    0.226950] PCI: CLS 32 bytes, default 64
[    0.227262] cpufreq-nforce2: No nForce2 chipset.
[    0.227301] Scanning for low memory corruption every 60 seconds
[    0.227512] audit: initializing netlink socket (disabled)
[    0.227531] type=2000 audit(1295371090.224:1): initialized
[    0.235841] Trying to unpack rootfs image as initramfs...
[    0.246995] highmem bounce pool size: 64 pages
[    0.247006] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.255099] VFS: Disk quotas dquot_6.5.2
[    0.255232] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.256061] fuse init (API version 7.14)
[    0.256174] msgmni has been set to 1683
[    0.263260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.263267] io scheduler noop registered
[    0.263269] io scheduler deadline registered
[    0.263287] io scheduler cfq registered (default)
[    0.263458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.263484] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.265352] ACPI: AC Adapter [ACAD] (on-line)
[    0.265446] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.265501] ACPI: Lid Switch [LID]
[    0.265555] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.265562] ACPI: Power Button [PWRB]
[    0.265636] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.265640] ACPI: Power Button [PWRF]
[    0.265767] ACPI: acpi_idle registered with cpuidle
[    0.265809] Marking TSC unstable due to TSC halts in idle
[    0.273951] Switching to clocksource acpi_pm
[    0.292455] thermal LNXTHERM:01: registered as thermal_zone0
[    0.292469] ACPI: Thermal Zone [THRM] (52 C)
[    0.292588] ERST: Table is not found!
[    0.292811] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.293209] serial 0000:00:14.6: PCI INT B -> GSI 5 (level, low) -> IRQ 5
[    0.293220] serial 0000:00:14.6: PCI INT B disabled
[    0.294553] brd: module loaded
[    0.295169] loop: module loaded
[    0.295510] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.295962] Fixed MDIO Bus: probed
[    0.300121] PPP generic driver version 2.4.2
[    0.300245] tun: Universal TUN/TAP device driver, 1.6
[    0.300248] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.300370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.300421]   alloc irq_desc for 19 on node -1
[    0.300424]   alloc kstat_irqs on node -1
[    0.300435] ehci_hcd 0000:02:07.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.300469] ehci_hcd 0000:02:07.2: EHCI Host Controller
[    0.300520] ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
[    0.300791] isapnp: Scanning for PnP cards...
[    0.355656] ehci_hcd 0000:02:07.2: irq 19, io mem 0xe8208c00
[    0.364152] ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00
[    0.364377] hub 1-0:1.0: USB hub found
[    0.364384] hub 1-0:1.0: 5 ports detected
[    0.364501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.364532] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.364564] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.364621] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    0.364648] ohci_hcd 0000:00:13.0: irq 19, io mem 0xe8001000
[    0.452418] hub 2-0:1.0: USB hub found
[    0.452429] hub 2-0:1.0: 3 ports detected
[    0.452521] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.452553] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.452612] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    0.452642] ohci_hcd 0000:00:13.1: irq 19, io mem 0xe8002000
[    0.543829] hub 3-0:1.0: USB hub found
[    0.543841] hub 3-0:1.0: 3 ports detected
[    0.543949] ohci_hcd 0000:02:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.543981] ohci_hcd 0000:02:07.0: OHCI Host Controller
[    0.547581] ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4
[    0.547627] ohci_hcd 0000:02:07.0: irq 16, io mem 0xe8206000
[    0.627703] ACPI: Battery Slot [BAT1] (battery present)
[    0.688477] hub 4-0:1.0: USB hub found
[    0.688487] hub 4-0:1.0: 3 ports detected
[    0.688588]   alloc irq_desc for 18 on node -1
[    0.688592]   alloc kstat_irqs on node -1
[    0.688602] ohci_hcd 0000:02:07.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    0.688636] ohci_hcd 0000:02:07.1: OHCI Host Controller
[    0.688697] ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5
[    0.688740] ohci_hcd 0000:02:07.1: irq 18, io mem 0xe8207000
[    0.808394] hub 5-0:1.0: USB hub found
[    0.808405] hub 5-0:1.0: 2 ports detected
[    0.808501] uhci_hcd: USB Universal Host Controller Interface driver
[    0.808638] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.817658] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.879714] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.879728] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.879791] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.879820] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.879854] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.880069] mice: PS/2 mouse device common for all mice
[    0.880267] rtc_cmos 00:03: RTC can wake from S4
[    0.880322] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.880341] rtc0: alarms up to one day, 242 bytes nvram
[    0.880513] device-mapper: uevent: version 1.0.3
[    0.880687] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.886240] device-mapper: multipath: version 1.1.1 loaded
[    0.886247] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.888541] EISA: Probing bus 0 at eisa.0
[    0.888551] Cannot allocate resource for EISA slot 1
[    0.888569] Cannot allocate resource for EISA slot 8
[    0.888571] EISA: Detected 0 cards.
[    0.894114] cpuidle: using governor ladder
[    0.894164] cpuidle: using governor menu
[    0.894593] TCP cubic registered
[    0.894768] NET: Registered protocol family 10
[    0.895183] lo: Disabled Privacy Extensions
[    0.895460] NET: Registered protocol family 17
[    0.895831] Using IPI No-Shortcut mode
[    0.895987] PM: Resume from disk failed.
[    0.896062] registered taskstats version 1
[    0.896297]   Magic number: 11:395:340
[    0.896407] rtc_cmos 00:03: setting system clock to 2011-01-18 17:18:12 UTC (1295371092)
[    0.896412] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.896414] EDD information not available.
[    0.904296] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.995112] Freeing initrd memory: 10736k freed
[    1.061322] isapnp: No Plug & Play device found
[    1.061559] Freeing unused kernel memory: 688k freed
[    1.063017] Write protecting the kernel text: 4936k
[    1.063049] Write protecting the kernel read-only data: 1976k
[    1.093830] udev[65]: starting version 163
[    1.201170] xor: automatically using best checksumming function: pIII_sse
[    1.220011]    pIII_sse  :  3878.000 MB/sec
[    1.220013] xor: using function: pIII_sse (3878.000 MB/sec)
[    1.412073] scsi0 : pata_atiixp
[    1.428147] usb 5-1: new full speed USB device using ohci_hcd and address 2
[    1.432046] scsi1 : pata_atiixp
[    1.433645] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8060 irq 14
[    1.433651] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8068 irq 15
[    1.462086] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.462120] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.596615] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD5A, max UDMA/100
[    1.596621] ata1.00: 117210240 sectors, multi 16: LBA48
[    1.604434] ata2.00: ATAPI: SD-R6252, 1A14, max MWDMA2
[    1.612588] ata1.00: configured for UDMA/100
[    1.612743] scsi 0:0:0:0: Direct-Access     ATA      IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
[    1.612984] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.613354] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    1.613421] sd 0:0:0:0: [sda] Write Protect is off
[    1.613425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.613453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.614153]  sda:
[    1.636379] ata2.00: configured for MWDMA2
[    1.637837]  sda1 sda2 sda3 <
[    1.642390] scsi 1:0:0:0: CD-ROM            TOSHIBA  ODD-DVD SD-R6252 1A14 PQ: 0 ANSI: 5
[    1.651305] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.651313] Uniform CD-ROM driver Revision: 3.20
[    1.651507] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.651610] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.669452]  sda5 >
[    1.670174] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.678475] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.686511] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.689402] device-mapper: dm-raid45: initialized v0.2594b
[    1.728488] usbcore: registered new interface driver hiddev
[    1.732072] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    1.732346] 8139too 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.733471] 8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0xa000, 00:02:3f:6d:24:9c, IRQ 19
[    1.735822] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.4/0000:02:07.1/usb5/5-1/5-1:1.0/input/input4
[    1.736165] generic-usb 0003:046D:C525.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:07.1-1/input0
[    1.747363] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.4/0000:02:07.1/usb5/5-1/5-1:1.1/input/input5
[    1.748968] generic-usb 0003:046D:C525.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:07.1-1/input1
[    1.749212] usbcore: registered new interface driver usbhid
[    1.749216] usbhid: USB HID core driver
[    2.232196] firewire_core: created device fw0: GUID 413f0200f55f013d, S400
[    2.483879] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.476039] floppy0: no floppy controllers found
[    5.765043] Adding 3473404k swap on /dev/sda5.  Priority:-1 extents:1 across:3473404k
[    8.178433] udev[322]: starting version 163
[    8.217083] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   10.530080] type=1400 audit(1295363902.130:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=488 comm="apparmor_parser"
[   10.530635] type=1400 audit(1295363902.130:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=488 comm="apparmor_parser"
[   10.530942] type=1400 audit(1295363902.130:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=488 comm="apparmor_parser"
[   11.528712] parport_pc 00:09: reported by Plug and Play ACPI
[   11.528744] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[   11.799848] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.956049] Disabling lock debugging due to kernel taint
[   11.990914] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[   12.043629] lp0: using parport0 (interrupt-driven).
[   12.053233] ppdev: user-space parallel port driver
[   12.224968] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6
[   12.225183] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   12.229298] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
[   12.250500] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
[   12.252529] Linux agpgart interface v0.103
[   12.583727] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006b]
[   12.583748] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
[   12.583753] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[   12.583756] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[   12.583761] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64
[   12.812568] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c18, PCI irq 17
[   12.812573] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[   12.812590] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0xa000-0xafff]
[   12.812594] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: excluding 0xa000-0xa0ff 0xa400-0xa43f 0xa800-0xa8ff 0xac00-0xacff
[   12.818173] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
[   12.818181] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8200000-0xe82fffff: excluding 0xe8200000-0xe820ffff
[   12.818198] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x97ffffff pref]
[   12.818201] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x97ffffff: excluding 0x90000000-0x97ffffff
[   12.819216] yenta_cardbus 0000:02:04.1: CardBus bridge found [103c:006b]
[   12.819237] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI
[   12.819241] yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI
[   12.819247] yenta_cardbus 0000:02:04.1: TI: mfunc 0x01111d22, devctl 0x64
[   13.048569] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0c18, PCI irq 16
[   13.048574] yenta_cardbus 0000:02:04.1: Socket status: 30000006
[   13.048580] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[   13.048595] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [io  0xa000-0xafff]
[   13.048600] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xafff: excluding 0xa000-0xa0ff 0xa400-0xa43f 0xa800-0xa8ff 0xac00-0xacff
[   13.052303] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
[   13.052307] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe8200000-0xe82fffff: excluding 0xe8200000-0xe820ffff
[   13.052326] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0x90000000-0x97ffffff pref]
[   13.052329] pcmcia_socket pcmcia_socket1: cs: memory probe 0x90000000-0x97ffffff: excluding 0x90000000-0x97ffffff
[   13.067848] ACPI: resource piix4_smbus [io  0x8040-0x8047] conflicts with ACPI region PMIO [??? 0x00008020-0x0000805f flags 0x4f]
[   13.067853] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.068157] agpgart-ati 0000:00:00.0: Ati IGP9100/M chipset
[   13.068309] reserve_ram_pages_type failed 0x3569c000-0x3569d000, track 0x10, req 0x10
[   13.068622] reserve_ram_pages_type failed 0x354ca000-0x354cb000, track 0x10, req 0x10
[   13.068935] reserve_ram_pages_type failed 0x35507000-0x35508000, track 0x10, req 0x10
[   13.069247] reserve_ram_pages_type failed 0x35731000-0x35732000, track 0x10, req 0x10
[   13.069559] reserve_ram_pages_type failed 0x3550d000-0x3550e000, track 0x10, req 0x10
[   13.069871] reserve_ram_pages_type failed 0x35577000-0x35578000, track 0x10, req 0x10
[   13.070184] reserve_ram_pages_type failed 0x356a8000-0x356a9000, track 0x10, req 0x10
[   13.070496] reserve_ram_pages_type failed 0x35724000-0x35725000, track 0x10, req 0x10
[   13.070808] reserve_ram_pages_type failed 0x3552c000-0x3552d000, track 0x10, req 0x10
[   13.071586] agpgart-ati 0000:00:00.0: AGP aperture is 32M @ 0xea000000
[   13.103232] usbcore: registered new interface driver ndiswrapper
[   13.623747] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x370-0x37f
[   13.624954] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
[   13.625485] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   13.625934] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[   13.626372] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd7fff 0xe0000-0xfffff
[   13.626441] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[   13.626509] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   13.626583] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   13.627300] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x370-0x37f
[   13.628514] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
[   13.629044] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[   13.629491] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[   13.629921] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd7fff 0xe0000-0xfffff
[   13.629991] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[   13.630059] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   13.630133] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[   13.835624] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 5 (level, low) -> IRQ 5
[   14.381479] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 5 (level, low) -> IRQ 5
[   14.812046] floppy0: no floppy controllers found
[   19.114771] type=1400 audit(1295363910.714:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=893 comm="apparmor_parser"
[   19.120601] type=1400 audit(1295363910.722:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=894 comm="apparmor_parser"
[   19.121168] type=1400 audit(1295363910.722:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=894 comm="apparmor_parser"
[   19.121479] type=1400 audit(1295363910.722:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=894 comm="apparmor_parser"
[   19.352494] type=1400 audit(1295363910.954:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=895 comm="apparmor_parser"
[   19.360752] type=1400 audit(1295363910.962:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=895 comm="apparmor_parser"
[   19.365785] type=1400 audit(1295363910.966:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=895 comm="apparmor_parser"
[   19.476570] type=1400 audit(1295363911.078:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=897 comm="apparmor_parser"
[   19.477287] type=1400 audit(1295363911.078:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=897 comm="apparmor_parser"
[   19.525946] type=1400 audit(1295363911.126:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=898 comm="apparmor_parser"
[   23.184625] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   26.778921] pci 0000:01:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   27.149613] [drm] Initialized drm 1.1.0 20060810
[   27.371510] [drm] radeon defaulting to kernel modesetting.
[   27.371516] [drm] radeon kernel modesetting enabled.
[   27.378224] [drm] initializing kernel modesetting (RV280 0x1002:0x5C61).
[   27.380360] [drm] register mmio base: 0xE8100000
[   27.380365] [drm] register mmio size: 65536
[   27.380599] agpgart-ati 0000:00:00.0: AGP 3.0 bridge
[   27.380619] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
[   27.380639] radeon 0000:01:05.0: putting AGP V3 device into 8x mode
[   27.380691] radeon 0000:01:05.0: GTT: 32M 0xEA000000 - 0xEBFFFFFF
[   27.380696] [drm] Generation 2 PCI interface, using max accessible memory
[   27.380702] radeon 0000:01:05.0: VRAM: 128M 0xF0000000 - 0xF7FFFFFF (64M used)
[   27.380736] [drm] radeon: irq initialized.
[   27.380856] [drm] Detected VRAM RAM=128M, BAR=128M
[   27.380862] [drm] RAM width 128bits DDR
[   27.382462] [TTM] Zone  kernel: Available graphics memory: 436584 kiB.
[   27.382467] [TTM] Zone highmem: Available graphics memory: 1030220 kiB.
[   27.382471] [TTM] Initializing pool allocator.
[   27.382509] [drm] radeon: 64M of VRAM memory ready
[   27.382511] [drm] radeon: 32M of GTT memory ready.
[   27.382629] [drm] Loading R200 Microcode
[   27.490493] [drm] radeon: ring at 0x00000000EA000000
[   27.490517] [drm] ring test succeeded in 1 usecs
[   27.490966] [drm] radeon: ib pool ready.
[   27.491083] [drm] ib test succeeded in 0 usecs
[   27.491260] [drm] Panel ID String: SEC                     
[   27.491263] [drm] Panel Size 1280x800
[   27.491303] [drm] Default TV standard: NTSC
[   27.491306] [drm] 27.000000000 MHz TV ref clk
[   27.491309] [drm] Default TV standard: NTSC
[   27.491311] [drm] 27.000000000 MHz TV ref clk
[   27.491343] [drm] Radeon Display Connectors
[   27.491346] [drm] Connector 0:
[   27.491347] [drm]   VGA
[   27.491350] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   27.491352] [drm]   Encoders:
[   27.491354] [drm]     CRT1: INTERNAL_DAC1
[   27.491356] [drm] Connector 1:
[   27.491357] [drm]   LVDS
[   27.491359] [drm]   Encoders:
[   27.491361] [drm]     LCD1: INTERNAL_LVDS
[   27.491362] [drm] Connector 2:
[   27.491364] [drm]   S-video
[   27.491365] [drm]   Encoders:
[   27.491367] [drm]     TV1: INTERNAL_DAC2
[   27.574333] [drm] fb mappable at 0xF0040000
[   27.574338] [drm] vram apper at 0xF0000000
[   27.574340] [drm] size 4096000
[   27.574342] [drm] fb depth is 24
[   27.574344] [drm]    pitch is 5120
[   27.577649] Console: switching to colour frame buffer device 160x50
[   27.577667] fb0: radeondrmfb frame buffer device
[   27.577669] drm: registered panic notifier
[   27.577674] Slow work thread pool: Starting up
[   27.581566] Slow work thread pool: Ready
[   27.581585] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
[   29.443556] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   33.280017] eth0: no IPv6 routers present
[   39.575936] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[  149.480256] lo: Disabled Privacy Extensions
[ 1790.684019] lo: Disabled Privacy Extensions
[ 1829.727159] lo: Disabled Privacy Extensions
[ 3034.410660] lo: Disabled Privacy Extensions
[10361.540079] usb 1-3: new high speed USB device using ehci_hcd and address 4

Not: Çıktıları verirken şu hususa dikkat edelim:
http://forum.ubuntu-tr.net/index.php/topic,14283.0.html

[guestwho]

    @matiloğlu, harici diski çıkarıp şu komutu yürüttükten sonra:

Kod Seç Genişlet

sudo modprobe -r ehci_hcd

    Harici diski yeniden takıp, şu komutun çıktısını kod etiketi içerisinde aktarsana:

Kod Seç Genişlet

dmesg | tail -n 40

[matiloglu]

verdiğin ilk kodu uyguladıktan sonra disk çalıştı. çıkışları veriyorum.

Kod Seç Genişlet



matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ sudo modprobe -r ehci_hcd
[sudo] password for matiloglu:
WARNING: All config files need .conf: /etc/modprobe.d/options, it will be ignored in a future release.
FATAL: Module ehci_hcd is builtin
matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ dmesg | tail -n 40
[   34.400697] [drm] vram apper at 0xF0000000
[   34.400699] [drm] size 4096000
[   34.400701] [drm] fb depth is 24
[   34.400703] [drm]    pitch is 5120
[   34.403266] Console: switching to colour frame buffer device 160x50
[   34.403285] fb0: radeondrmfb frame buffer device
[   34.403287] drm: registered panic notifier
[   34.403292] Slow work thread pool: Starting up
[   34.407358] Slow work thread pool: Ready
[   34.407378] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
[   35.747928] usb 1-3: USB disconnect, address 3
[   36.465586] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   40.717139] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   43.808041] eth0: no IPv6 routers present
[   69.702593] lo: Disabled Privacy Extensions
[  266.972132] usb 1-3: new high speed USB device using ehci_hcd and address 5
[  267.124018] scsi3 : usb-storage 1-3:1.0
[  268.129123] scsi 3:0:0:0: Direct-Access     WD       1600BEVExternal  1.02 PQ: 0 ANSI: 0
[  268.133173] sd 3:0:0:0: Attached scsi generic sg2 type 0
[  268.143220] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[  268.144020] sd 3:0:0:0: [sdb] Write Protect is off
[  268.144020] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  268.144020] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  268.152018] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  268.152018]  sdb: sdb1
[  268.203476] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  268.203495] sd 3:0:0:0: [sdb] Attached SCSI disk
[  293.538718] usb 1-3: USB disconnect, address 5
[  302.084333] usb 1-3: new high speed USB device using ehci_hcd and address 6
[  302.234154] scsi4 : usb-storage 1-3:1.0
[  303.240017] scsi 4:0:0:0: Direct-Access     WD       1600BEVExternal  1.02 PQ: 0 ANSI: 0
[  303.244018] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  303.252669] sd 4:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[  303.254097] sd 4:0:0:0: [sdb] Write Protect is off
[  303.254106] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  303.254114] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  303.258975] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  303.259007]  sdb: sdb1
[  303.308062] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  303.308075] sd 4:0:0:0: [sdb] Attached SCSI disk




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 18 Ocak 2011 - 22:22:16
Teşekkür ederim yardımların için. Allah razı olsun!

[guestwho]

    Şu komutların çıktılarını da aktarsana:

Kod Seç Genişlet

cat /lib/modules/2.6.35-24-generic/modules.order | grep hcd

Kod Seç Genişlet

cat /lib/modules/2.6.35-25-generic/modules.order | grep hcd

    Bir de şu kod etiketini düzgün kullansan iyi olur.

[matiloglu]

çıktılar;

Kod Seç Genişlet


matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ cat /lib/modules/2.6.35-24-generic/modules.order | grep hcd
kernel/drivers/usb/host/whci/whci-hcd.ko
kernel/drivers/usb/host/oxu210hp-hcd.ko
kernel/drivers/usb/host/isp116x-hcd.ko
kernel/drivers/usb/host/isp1362-hcd.ko
kernel/drivers/usb/host/xhci-hcd.ko
kernel/drivers/usb/host/sl811-hcd.ko
kernel/drivers/usb/host/u132-hcd.ko
kernel/drivers/usb/host/r8a66597-hcd.ko
kernel/drivers/staging/usbip/vhci-hcd.ko
kernel/drivers/usb/gadget/dummy_hcd.ko
matiloglu@matiloglu-Pavilion-zx5000-DS474U-ABA:~$ cat /lib/modules/2.6.35-25-generic/modules.order | grep hcd
kernel/drivers/usb/host/whci/whci-hcd.ko
kernel/drivers/usb/host/oxu210hp-hcd.ko
kernel/drivers/usb/host/isp116x-hcd.ko
kernel/drivers/usb/host/isp1362-hcd.ko
kernel/drivers/usb/host/xhci-hcd.ko
kernel/drivers/usb/host/sl811-hcd.ko
kernel/drivers/usb/host/u132-hcd.ko
kernel/drivers/usb/host/r8a66597-hcd.ko
kernel/drivers/staging/usbip/vhci-hcd.ko
kernel/drivers/usb/gadget/dummy_hcd.ko



[guestwho]

    @matiloglu; anladığım kadarıyla sorun, çekirdeğin "usb 1.0" ve "usb 2.0" modüllerinin yüklenmesi sırasındaki karışıklıktan kaynaklanıyor. Yukarıdaki "sudo modprobe -r ehci_hcd" komutundan sonra harici diskin veri transfer hızında bir değişiklik oldu mu bu arada ?

[matiloglu]

evet ciddi bir artış var.

[guestwho]

    O halde sorun tekrar ortaya çıkarsa, bu şekilde müdahele ederek kullanabilirsin harici diski. Zaten muhtemelen bir sonraki çekirdek güncellemesinde düzelecektir. Bu modülü blacklist 'e de eklemeyelim, zira sonraları gerekli olabilir. Şimdilik geçmiş olsun.