Avermedia - AverTV Volar AX, USB Analog TV Kartı Sorunu.

Başlatan ugurarslan, 06 Ocak 2011 - 01:35:41

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

ugurarslan

Merhaba arkadaşlar,

Forumdaki bu bölümü inceledim, başlığıma uygun iki konu bulup çözümleri denedim ancak çözüme ulaşamadım. Bu yüzden bu başlığı açtım.

Ubuntu'ya destek veren TV kartımın sürücüsünü http://www.avermedia.com/avertv/tr/Support/DownloadCount.aspx?FDFId=1567 adresinden indirdim. Bilgisayarım 32 bit i desteklemekte. Kurulum dosyalarını ev klasörüne taşıyıp

sudo ./AVERMEDIA-Linux-x86-H826D-0.10-beta.sh

ile driveri kurdum. Mavi ekranda başarıyla kuruldu yazısını gördüm.

Ancak klavuzda yazan mplayer,kaffeine gibi programlarla televizyon izleyemiyorum. Gnomeradio ile radyo dinlemek istediğimde ise sırasıyla "/dev/mixer" açılamadı! , arkasından da

Could not open device "/dev/radio"!
Check your settings and make sure that no other
program is using /dev/radio.
Also make sure that you have read-access to it.


şeklinde hatalar alıyorum. lscpi ve lsmod çıktılarım ise aşağıdaki gibi:

lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
08:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)


lsmod
Module                  Size  Used by
binfmt_misc             6599  1
vboxnetadp              6614  0
vboxnetflt             18657  0
vboxdrv               214831  2 vboxnetadp,vboxnetflt
vmnet                  41253  13
vmblock                10778  1
vsock                  37463  0
vmci                   52813  1 vsock
vmmon                  63288  0
parport_pc             26058  0
ppdev                   5556  0
snd_hda_codec_conexant    29971  1
arc4                    1165  2
snd_hda_intel          22107  2
snd_hda_codec          87552  2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep               5040  1 snd_hda_codec
iwl3945                85550  0
snd_pcm                71475  2 snd_hda_intel,snd_hda_codec
i915                  294989  5
snd_seq_midi            4588  0
snd_rawmidi            17783  1 snd_seq_midi
joydev                  8767  0
drm_kms_helper         30200  1 i915
snd_seq_midi_event      6047  1 snd_seq_midi
iwlcore               127415  1 iwl3945
snd_seq                47174  2 snd_seq_midi,snd_seq_midi_event
mac80211              231541  2 iwl3945,iwlcore
snd_timer              19067  2 snd_pcm,snd_seq
drm                   168092  5 i915,drm_kms_helper
snd_seq_device          5744  3 snd_seq_midi,snd_rawmidi,snd_seq
hp_wmi                  5223  0
snd                    49038  13 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
intel_agp              26694  2 i915
led_class               2633  0
i2c_algo_bit            5168  1 i915
cfg80211              144470  3 iwl3945,iwlcore,mac80211
lp                      7342  0
psmouse                59033  0
serio_raw               4022  0
video                  18712  1 i915
output                  1883  1 video
soundcore                880  1 snd
snd_page_alloc          7120  2 snd_hda_intel,snd_pcm
agpgart                32011  2 drm,intel_agp
parport                31492  3 parport_pc,ppdev,lp
usbhid                 36882  0
hid                    67742  1 usbhid
8139too                19581  0
8139cp                 16934  0
mii                     4425  2 8139too,8139cp


İlgilendiğiniz için teşekkür ederim.
One for all, all for the future...

zeitgeist

Usb aygıtı taktıktan sonra alacağın şu çıktıyı buraya aktarır mısın?

lsusb

Hangi yonga setini kullanıyor bu kart; bt878, 848 ...v.b.?
Özgürlüğü ne kadar anlarsan o kadar az sahip olursun. John Fowles

ugurarslan

lsusb yazdığımda şöyle bir sonuç alıyorum :

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1bcf:053e Sunplus Innovation Technology Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 07ca:b827 AVerMedia Technologies, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Sanırım b827 oluyor bu durumda. Kartın tam adı AVerTV Volar AX(A827A) . http://www.avermedia.com/avertv/tr/Support/Download.aspx?Type=Software&id=182&tab=APDriver adresinde bu isimle gözüküyor.
One for all, all for the future...

zeitgeist

Son dönemlerde çıkmış yeni yongalı kartlarla hiç tanışıklığım yok ancak lsmod çıktısında usb tv kartıyla ilgili yüklenmiş herhangi bir modül göremedim ben. Bu da ister istemez aklıma sürücüleri getiriyor lakin sen başarılı bir yükleme yaptığını söylemişsin. Belki Tvtime uygulamasını kurduktan sonra terminalden çalıştırman ve bizim de konsoldaki mesajları görmemiz faydalı olabilir.
Özgürlüğü ne kadar anlarsan o kadar az sahip olursun. John Fowles

ugurarslan

#4
Avermedia'nın internet sitesinden driverleri indirip, kurulumu tekrar denedim. Aşama aşama yaptıklarımı yazıyorum:

1. Driverleri indirdikten sonra dosyaları Ev Dizini'ne taşıdım.

2. Bir önceki kurulumdan farklı olarak terminalde "sudo su" ile root haklarını aldım. Daha sonra ./AVERMEDIA-Linux-x86-H826D-0.10-beta.sh komutu ile kurulumu başlattım.

Verifying archive integrity...
Extracting archive...
Running installer...
yazılarını gördükten sonra beni mavi kurulum ekranına aldı.

4. "AVerMedia AVerTV Volar HX/AX/MAX Linux Driver Installer
    Welcome to AVerMedia AVerTV Volar HX/AX/MAX Linux driver installer.This installer will install/upgrade AVerTV Volar HX/AX/MAX driver for the running kernel.

Supported Product: AVerTV Hybrid Volar HX/AX/Lite (A827)
                   AVerTV Hybrid Volar MAX (H826)                       
You are using: 32bit Linux
Your running kernel: 2.6.35-24-generic


Bu ekranı tamam ile geçtim.

5. Lisans sözleşmesini onaylayarak geçtim.

6. Please select an installation method 
Normal  Automatic installation. Recommended for most users
Expert  Extract drivers to selected location. For kernel hackers only


Bu ekrandan normal kurulumu seçtim.

7. Preparing driver install, please wait a moment... yazısı ile kurulum başladı.

8. Driver preparation completed.
Copying kernel modules ... 
Rebuilding kernel module dependencies
yazısı ile kurulum sonlandı.

9.  AVerTV Volar HX/AX/MAX Linux Driver is successfully installed.AVerTV Volar HX/AX/MAX driver should be loaded automatically everytime the device is plugged in. If AVerTV Volar HX/AX/MAX device is already plugged in,   please remove it and re-plug it. yazısı ile kurulumun başarılı olduğunu gördüm.

10. Kurulumdan hemen sonra root haklarıyla lsmod çıktısı aldım.Çıktının 3. ve 7. satırları arası aşağıdaki gibi değişti.

lsmod
Module                  Size  Used by
h826d                 576962  1
averusbh826d           76271  1 h826d
dvb_core               88505  1 h826d
videodev               43098  1 h826d
v4l1_compat            13359  1 videodev
binfmt_misc             6599  1
vboxnetadp              6614  0
vboxnetflt             18657  0
vboxdrv               214831  2 vboxnetadp,vboxnetflt
vmnet                  41253  13
vmblock                10778  1
vsock                  37463  0
vmci                   52813  1 vsock
vmmon                  63288  0
parport_pc             26058  0
ppdev                   5556  0
snd_hda_codec_conexant    29971  1
joydev                  8767  0
arc4                    1165  2
iwl3945                85550  0
snd_hda_intel          22107  2
snd_hda_codec          87552  2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep               5040  1 snd_hda_codec
snd_pcm                71475  3 h826d,snd_hda_intel,snd_hda_codec
snd_seq_midi            4588  0
snd_rawmidi            17783  1 snd_seq_midi
i915                  294989  5
iwlcore               127415  1 iwl3945
snd_seq_midi_event      6047  1 snd_seq_midi
snd_seq                47174  2 snd_seq_midi,snd_seq_midi_event
mac80211              231541  2 iwl3945,iwlcore
drm_kms_helper         30200  1 i915
snd_timer              19067  2 snd_pcm,snd_seq
snd_seq_device          5744  3 snd_seq_midi,snd_rawmidi,snd_seq
drm                   168092  5 i915,drm_kms_helper
hp_wmi                  5223  0
cfg80211              144470  3 iwl3945,iwlcore,mac80211
intel_agp              26694  2 i915
snd                    49038  16 h826d,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse                59033  0
i2c_algo_bit            5168  1 i915
led_class               2633  0
serio_raw               4022  0
soundcore                880  1 snd
snd_page_alloc          7120  2 snd_hda_intel,snd_pcm
video                  18712  1 i915
agpgart                32011  2 drm,intel_agp
output                  1883  1 video
lp                      7342  0
parport                31492  3 parport_pc,ppdev,lp
8139too                19581  0
8139cp                 16934  0
mii                     4425  2 8139too,8139cp


lspci çıktısı aşağıdaki gibi :
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
08:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)n (rev 02)
08:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)


Sonuç olarak gnomeradio yu tekrar kurdum ve aynı hatayı aldım.Acaba 6. aşamadaki kurulum yönteminde "expert" i seçerek kurulum klasörü mü ayarlamalıyım. Bu şekilde bir ayarlama yaparsam hangi klasörü kullanmalıyım? TVtime ile ilgili olarak klavuzunda şöyle bir şey buldum.


TVTime

TVTime is an analog TV application for watching NTSC/PAL/SECAM tv programs.
Please refer to the following website for download and installation:

http://tvtime.sourceforge.net

Ubuntu Linux is tested with TVTime and works with our driver. Although,
TVTime does not support TV audio with our driver. To get audio from TV,
issue the following command while watch TVTime:

$ arecord -D hw:1,0 -r 48000 -c 2 -f S16_LE | aplay -

Please refer to ALSA documents for help with arecord and aplay commands.
Also refer to the following Wiki pages for ALSA and TV audio related issues:

http://www.linuxtv.org/v4lwiki/index.php/Saa7134-alsa


Besides using arecord and aplay, using "sox" is also a good idea.

First use "pavucontrol" to discover your audio hardware, including A827/H826
and the sound card.

For Ubuntu 8.10:

    $ sox -c 2 -s -w -r 48000 -t alsa hw:0 -t alsa -w -r 32000 front:2


For Ubuntu 9.04:

    $ sox -c 2 -s -r 48000 -t alsa hw:1 -t alsa -r 48000 -d


Please refer to the documentations of sox for detailed usage.


Buradan sonra ne yapacağımı bilmiyorum.
One for all, all for the future...

if

Dokuzuncu adımda kartınızı her taktığınızda sürücünün devreye gireceği, eğer kurulum aşamasında takılı bulunuyor ise çıkartıp tekrar takmanız önerilmiş. TVTime'ın denendiği ve Linux üstünde sürücü gerekmeden çalıştığı ama televizyon seyrederken ses almak için arecord -D hw:1,0 -r 48000 -c 2 -f S16_LE | aplay - komutunu uygulamanızı istemiş.

ugurarslan

Avermedia hazırladığı paketçiğin içinde linux için bir klavuz hazırlamış. Klavuzun tamamı şu şekilde :



To watch TV programs with AVerTV Volar HX/AX/MAX, you need TV applications.
Some popular TV applications are listed below for your reference.

========================
Kaffeine
========================

Kaffeine is a digital TV application for watching DVB-T programs.
Please refer to the following website for download and installation:
http://kaffeine.kde.org

Ubuntu Linux is tested with Kaffeine and works with our driver.
To use Kaffeine in Ubuntu, please install two packages:

kaffeine, xine-ui

Do the following at the terminal window to install the packages:

$ sudo apt-get install kaffeine xine-ui


========================
MPlayer
========================

MPlayer is a multimedia player capable of supporting variety of media sources.
In this case, MPlayer can be used for watching NTSC/PAL/SECAM/DVB-T TV programs.
TV audio is supported by MPlayer directly.

Ubuntu Linux has been tested with MPlayer and works with our driver.
To use MPlayer in Ubuntu, please install by doing the following at the terminal
window:

$ sudo apt-get install mplayer


To watch NTSC TV programs, for example, please do the following:

$ mplayer tv:// -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=12:freq=409250:outfmt=YUY2


To watch PAL TV programs, for example, please do the following:

$ mplayer tv:// -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=0:freq=147250:outfmt=YUY2


The above example can also be used in the case of external inputs such as
composite and S-Video.

If video signal is from composite and is NTSC:

    $  mplayer tv:// -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=12:outfmt=YUY2:input=1

If video signal is from S-Video and is NTSC:

    $  mplayer tv:// -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=12:outfmt=YUY2:input=2


If video signal is from composite and is PAL:

    $  mplayer tv:// -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=0:outfmt=YUY2:input=1

If video signal is from S-Video and is PAL:

    $  mplayer tv:// -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=0:outfmt=YUY2:input=2


MPlayer also supports receiving FM radio from our tuner products.

    $ mplayer radio://104.9/capture -radio device=/dev/radio0:adevice=hw=1,0 -rawaudio rate=48000

This example receives FM radio broadcast from 104.9MHz. Note that MPlayer has unidentified issues with receiving
FM radio on some platforms. This causes the above example to successfuly execute but no sound can be heard.


Please note that the ALSA audio device specified in the above examples may change, depending on the audio hardware
available in the system. For a listing of audio devices, please do:

    $ cat /proc/asound/pcm
    00-02: ALC883 Analog : ALC883 Analog : capture 1
    00-01: ALC883 Digital : ALC883 Digital : playback 1 : capture 1
    00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
    01-00: H826 PCM : H826 : capture 1

In this case, the audio device from H826 tuner must be specified as "adevice=hw.1,0".


To watch DVB-T TV programs, please fist use "dvbscan" to perform channel scan
and copy the resulting program list into ~/.mplayer/channels.conf.
Then issue the following command:

    $ mplayer dvb://BBC

In this case there must be a program name called "BBC" in ~/.mplayer/channels.conf.

Please also note that MPlayer provides a "slave" mode in which commands can be
issued to mplayer to change
TV channel and other settings as well. A list of commands can be obtained by
running the following commands:

    $ mplayer -input cmdlist


For detailed usage of MPlayer, please refer to the official MPlayer website:

http://www.mplayerhq.hu

For detailed information of "dvbscan", please refer to the following website:

    http://www.linuxtv.org/wiki/index.php/Scan


========================
MEncoder
========================

mencoder (MPlayer's Movie Encoder) is a simple movie encoder,  designed
to encode MPlayer-playable movies (see above) to other MPlayer-playable
formats (see below).

Ubuntu Linux has been tested with MEncoder and works with our driver.
To use MEncoder in Ubuntu, please install by doing the following at the terminal
window:

    $ sudo apt-get install mencoder


To record "test.avi" in mpeg4 format from composite, for example, please do the following:

    $ mencoder tv:// -o test.avi -oac copy -ovc lavc -lavcopts vcodec=mpeg4 -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=12:input=1:outfmt=YUY2

To record "test.avi" in raw data format from SVideo, for example, please do the following:

    $ mencoder tv:// -o test.avi -oac copy -ovc copy -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=12:input=1:outfmt=YUY2


To record "tv55.avi" in raw data format from TV channel 55, for example, please do the following:

$ mencoder tv:// -o tv55.avi -ovc copy -oac copy -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=12:outfmt=YUY2:input=0:chanlist=us-cable:channel=55:buffersize=16


For detailed usage of MEncoder, please refer to the official MEncoder website:

    http://www.mplayerhq.hu


========================
TVTime
========================

TVTime is an analog TV application for watching NTSC/PAL/SECAM tv programs.
Please refer to the following website for download and installation:

http://tvtime.sourceforge.net

Ubuntu Linux is tested with TVTime and works with our driver. Although,
TVTime does not support TV audio with our driver. To get audio from TV,
issue the following command while watch TVTime:

$ arecord -D hw:1,0 -r 48000 -c 2 -f S16_LE | aplay -

Please refer to ALSA documents for help with arecord and aplay commands.
Also refer to the following Wiki pages for ALSA and TV audio related issues:

http://www.linuxtv.org/v4lwiki/index.php/Saa7134-alsa


Besides using arecord and aplay, using "sox" is also a good idea.

First use "pavucontrol" to discover your audio hardware, including A827/H826
and the sound card.

For Ubuntu 8.10:

    $ sox -c 2 -s -w -r 48000 -t alsa hw:0 -t alsa -w -r 32000 front:2


For Ubuntu 9.04:

    $ sox -c 2 -s -r 48000 -t alsa hw:1 -t alsa -r 48000 -d


Please refer to the documentations of sox for detailed usage.


9. adımdaki yazıyı büyük ihtimalle sürücüyü yeniden kurduğum için aldım.Daha sonra tvtime i açtığımda tv kartımın ışığı yandı.. Ancak tvtime kilitlendi. Klavuzda anladığım kadarıyla en uygun mplayer olarak gözüküyor. Ancak orada anlatılanı uyguladığımda; örneğin radyo dinlemek istediğimde terminale şöyle bir kod yazıyorum.

mplayer radio://89.3/capture -radio device=/dev/radio0:adevice=hw=1,0 -rawaudio rate=48000


Bana şöyle bir hata veriyor :

MPlayer was compiled without Radio interface support.
MPlayer 1.0rc4-4.4.5 (C) 2000-2010 MPlayer Team


TV izlemek için şöyle bir kod var bunu yazınca da mavi bir ekran geliyor. Galiba bir satıra frekans yazmam lazım:

mplayer tv:// -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:normid=0:outfmt=YUY2:input=1


Kaffeine i kurdum ancak kaynak olarak tv kartını görmedi, Tvtime'da bir kilitlenme var.. Mplayer'de birkaç oynama yapmam lazım gibi... Ayrıca bu mplayer a, ya da diğerlerine kanallarımı kaydedebilir miyim bilmiyorum. Gerçi TV kartından görüntü almayı şu an ilk hedef olarak görüyorum :) Teşekkür ederim.
One for all, all for the future...

if

Aşinası olmadığım bir konu olduğu için yardımcı olamayacağım. Mplayer sorunu için bu bağlantının son mesajında bir çözüm önerilmiş. Sanırım o çözümü uygulamak için yüklü olan mplayerı kaldırmak gerek.

ugurarslan

Sayfanın sonundaki kodları denediğimde aşağıdaki hatayı aldım :(

ugur@Ugur:~$ dpkg-source -x mplayer_version-revision.dsc
dpkg-source: hata: mplayer_version-revision.dsc açılamıyor: Böyle bir dosya ya da dizin yok
ugur@Ugur:~$ DEB_BUILD_OPTIONS="--enable-gui --enable-radio --disable-ivt" fakeroot debian/rules binar
/usr/bin/fakeroot: satır 176: debian/rules: Böyle bir dosya ya da dizin yok
ugur@Ugur:~$


Çabanız için teşekkür ederim. Sanırım diğer arkadaşlardan benim gibi aynı problemi yaşamış ve çözmüş arkadaşlar vardır.

Radyo ve tv den umudu kesmek üzereyim :(
One for all, all for the future...

zeitgeist

Terminalden

tvtime

komutuyla uygulamayı başlattıktan sonra alacağın çıktıları görseydik?
Özgürlüğü ne kadar anlarsan o kadar az sahip olursun. John Fowles

ugurarslan

Synaptics paket yöneticisinden tvtime i kurdum. Kurar kurmaz gelen ayar ekranında önce ; Türkiye'deki analog yayın için geçerli olan PAL ı , daha sonra da bölge kısmından Europe i seçtim.

Bundan sonra Tvtime i kapatıp konsolu açtım. Konsola tvtime yazdığımda tvtime çalışırken şu çıktıyı aldım :

ugur@Ugur:~$ tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/ugur/.tvtime/tvtime.xml
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.


Bu arada bunu yaparken TV kartımın ışığı yanıyordu.
One for all, all for the future...

heartsmagic

Görüntü konusunu bilemiyorum elbette, ancak mixer konusu 10.10 için sıkıntılıymış TVtime için:
https://bugs.launchpad.net/ubuntu/+source/tvtime/+bug/650693
https://bugs.launchpad.net/ubuntu/+bug/619013

Şu cevaptan [1] anladığım kadarıyla https://launchpad.net/~diwic/+archive/maverick PPA'sındaki Tvtime kullanıldığında aşağıdaki komutla mixer sorunu aşılabiliyormuş:
tvtime --mixer=hw:0/Line

[1] https://bugs.launchpad.net/ubuntu/+source/tvtime/+bug/650693/comments/10
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ugurarslan

Verdiğiniz kodda sanırım mixer şöyle bir hata veriyor:

ugur@Ugur:~$ tvtime --mixer=hw:0/Line
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/ugur/.tvtime/tvtime.xml
mixer: Can't open device hw, mixer volume and mute unavailable.
mixer: No such mixer channel '0/Line', using channel 'line'.
lume and mute unavailable.
mixer: No such mixer channel '0/Line', using channel 'line'.


Mplayer ile bir çözüm var mı? Galiba tvtime ile olmayacak...

Şu sorunu çözeyim bu kartın kullanım klavuzunu ben yazacağım. :)
One for all, all for the future...

heartsmagic

Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ugurarslan

Son söylediğinizi anlamadım. Kurulum esnasında yayın için PAL-BG ve europe i seçtim. Bunun dışında verdiğiniz kodu girdim.

Söylediğinizi nasıl ekleyebilirim?
One for all, all for the future...

zeitgeist

Öncelikle Tvtime uygulamasını kaldır:

sudo apt-get --purge remove tvtime

Ardından bahsi geçen depoyu ekle:

sudo add-apt-repository ppa:diwic/maverick

Ardından şu komutla depoları güncelle:

sudo apt-get update

Ardından Tvtime uygulamasını yeniden yükle:

sudo apt-get insatall tvtime

Yine yapılandırma ekranıyla karşılaşacaksın ve yine daha önceki yaptığın iki ayarı yapacaksın, yani; pal ve avrupa. Ardından TvTime uygulamasını uçbirimde şu komutla çalıştır:

tvtime --mixer=hw:0/Line

Çalışırsa, görüntü ve ses alabilirsen ne ala olmazsa uçbirimde verdiği çıktıları yine buraya aktarırsın.
Özgürlüğü ne kadar anlarsan o kadar az sahip olursun. John Fowles

ugurarslan

Normal kullanıcı olarak deneyince yazma izinleri hatası aldım.Şu şekilde

ugur@Ugur:~$ tvtime --mixer=hw:0/Line
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
I/O warning : failed to load external entity "/home/ugur/.tvtime/tvtime.xml"
I/O error : Permission denied
I/O error : Permission denied
Cannot change owner of /home/ugur/.tvtime/tvtime.xml: Erişim engellendi.
mixer: find error: Başarılı
mixer: Can't open mixer hw:0, mixer volume and mute unavailable.
mixer: Can't open device hw, mixer volume and mute unavailable.
I/O error : Permission denied
I/O error : Permission denied


Daha sonra sudo su ile root a geçip, verdiğiniz kodu orada yazdım. Aldığım çıktı aşağıdaki gibi:

root@Ugur:/home/ugur# tvtime --mixer=hw:0/Line
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /root/.tvtime/tvtime.xml
mixer: find error: Başarılı
mixer: Can't open mixer hw:0, mixer volume and mute unavailable.
mixer: Can't open device hw, mixer volume and mute unavailable.


Hep mixerde takılıyor sanırım.
One for all, all for the future...

zeitgeist

Evet ne yazık ki yine mixer hatası vermiş. Hata verdiğinde kapanıyor mu Tvtime yoksa mavi bir ekranda mı kalıyor?

Eğer kapanıyorsa şu aşamada benim aklıma çözüme dair bir fikir gelmiyor. Kullandığın aygıta dair pek Linux belgesi yok etrafta. Gözüme çarpan bir bilgi olursa buraya geçerim yine.
Özgürlüğü ne kadar anlarsan o kadar az sahip olursun. John Fowles

sema

Bir de şurada söyleneni denesek;

https://bugs.launchpad.net/ubuntu/+source/tvtime/+bug/650693/comments/4

sudo apt-get install oss4-dkms oss4-base oss4-gtk && sudo reboot

Sonra şu şekilde kontrol edebilirsin;

sudo ossxmix
susema

ugurarslan

Alıntı yapılan: sema - 14 Ocak 2011 - 00:20:12
Bir de şurada söyleneni denesek;

https://bugs.launchpad.net/ubuntu/+source/tvtime/+bug/650693/comments/4

sudo apt-get install oss4-dkms oss4-base oss4-gtk && sudo reboot

Sonra şu şekilde kontrol edebilirsin;

sudo ossxmix

Bu programı söylediğiniz şekilde kurdum , artık ubuntumdan hiç ses alamıyorum.

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3c80'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3c80'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3de8'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3de8'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3de8'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa06bcf0'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa06bcf0'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa06be58'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa06be58'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa06be58'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa06be58'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa06be58'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3ad0'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3800'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3800'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3800'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3800'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3968'

(ossxmix:1991): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.26.0/gobject/gsignal.c:3081: signal name `depressed' is invalid for instance `0xa0b3de8'
One for all, all for the future...

zeitgeist

gstreamer-properties

komutuyla açacağın uygulamada ses çıkışını oss olarak ayarlarsan sistem genelinde ses alabilmen gerek.

Yukarıda verdiğin çıktılar ossxmix uygulamasını konsoldan çalıştırdığında mı geliyor?
Özgürlüğü ne kadar anlarsan o kadar az sahip olursun. John Fowles

ugurarslan

Verdiğiniz kodu girip Varsayılan Çıkışı OSS açık ses sistemi yaptım.. Bir defa ses aldım. Daha sonra müzik açtığımda ses gitti. Sanırım bu olmayacak.. Aldığım bir yedek ile dosyanın kurulmamış haline döneceğim. Bu konuda sıkıntı yok. Bir önceki mesajımda yazdığım kodları sudo ossxmix çalıştığında veriyor.

TV kartı konusunda başka fikriniz var mı?
One for all, all for the future...

zeitgeist

Ses meselesiyle ilgili kısa bir özet geçeyim sana; @sema'nın önerisiyle sen sistemine oss ses mimarsini de yüklemiş oldun. Dolayısıyla sistemindeki her bir uygulama için o ses motorunu kullandığını göstermen gerek. Yani yukarıdaki işlemle sistem geneline oss ses çıkışını kullan dediğin gibi diğer uygulamaların ayarlarına girerek ses çıkışı olarak oss seçeneğini belirlemen gerek. Söz gelimi SmPlayer için; Seçenekler/Özellikller/Genel/Ses altında oss seçili olmalı.

Gelelim ossxmix meselesine; verdiğin çıktılarda hata görünmüyor yalnızca uyarı veriyor doyasıyla uygulamanın sorunsuz çalışması gerek. Ancak ossxmix bir ses karıştırıcı yani sesle ilgili çeşitli yapılandırma ayarları için kullanağın bir uygulama. Doğrudan Tvtime ile ilgili değil. Yalnızca ses karıştırıcı hatası verdiği için @sema farklı bir ses karıştırıcı önermiş sana.

Şu son durumda TvTime uygulamasını tekrar çalıştırmayı denediğinde netice alabiliyor musun? İlk önce şu komutla dene:

tvtime

Ardından bir de şu komutla:

tvtime --mixer=hw:0/Line

İki şekilde de durumda bir düzelme olmazsa şu aşamada başka bir önerim yok maalesef. Ancak bu başlık aklımda ve herhangi bir bilgi yakalarsam buraya geçerim.
Özgürlüğü ne kadar anlarsan o kadar az sahip olursun. John Fowles

baranbarlas

#23
konuyu tekrar acmaktansa devam ettireyim dedim bendede a827 cipsetli avermedia usb tv karti var ve driver yüklemeye calismam esnasinda hata vermekte sistem lubuntu 64 ekran

lsusb ciktisi
mypc@cicim:~$ lsusb
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 050d:11f2 Belkin Components
Bus 001 Device 005: ID 07ca:a827 AVerMedia Technologies, Inc.
mypc@cicim:~$

lsmod


Module                  Size  Used by
nvidia              11257760  43
pci_stub               12623  1
vboxpci                23195  0
vboxnetadp             25671  0
vboxnetflt             23480  0
vboxdrv               287190  3 vboxpci,vboxnetadp,vboxnetflt
rfcomm                 46620  0
bnep                   18141  2
parport_pc             32689  0
arc4                   12530  2
ppdev                  17074  0
bluetooth             209249  10 rfcomm,bnep
snd_hda_codec_conexant    57802  1
binfmt_misc            17501  1
snd_hda_intel          33492  5
snd_hda_codec         134213  2 snd_hda_codec_conexant,snd_hda_intel
rtl8192cu              67660  0
snd_hwdep              17699  1 snd_hda_codec
snd_pcm                96668  3 snd_hda_intel,snd_hda_codec
rtl8192c_common        48780  1 rtl8192cu
rtlwifi                74749  1 rtl8192cu
snd_seq_midi           13325  0
snd_rawmidi            30513  1 snd_seq_midi
snd_seq_midi_event     14900  1 snd_seq_midi
snd_seq                61555  2 snd_seq_midi,snd_seq_midi_event
snd_timer              29426  2 snd_pcm,snd_seq
mac80211              540032  3 rtl8192cu,rtl8192c_common,rtlwifi
snd_seq_device         14498  3 snd_seq_midi,snd_rawmidi,snd_seq
kvm_amd                55605  0
kvm                   414071  1 kvm_amd
hp_wmi                 18049  0
cfg80211              206797  2 rtlwifi,mac80211
snd                    78921  18 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
sparse_keymap          13891  1 hp_wmi
edac_core              52452  0
psmouse                95595  0
soundcore              15048  1 snd
edac_mce_amd           23304  0
snd_page_alloc         18485  2 snd_hda_intel,snd_pcm
serio_raw              13216  0
k8temp                 12979  0
joydev                 17458  0
video                  19391  0
wmi                    19071  1 hp_wmi
nv_tco                 13565  0
i2c_nforce2            13014  0
mac_hid                13206  0
lp                     17760  0
parport                46346  3 parport_pc,ppdev,lp
hid_generic            12541  0
usbhid                 46987  0
hid                   100411  2 hid_generic,usbhid
forcedeth              67157  0
pata_amd               14119  0
sata_nv                31831  2



yardim edilebilirse cok ama cok sevinecegin

NightBlue