desktop kurulumunda hata

[snnyk]

mrb arkadaşlar

server a

sudo apt-get install ubuntu-desktop

ile masaüstü kurdum daha sonra vnc server kurdum

server a vnc ile giriş yaptığımda sadece terminali görüyorum

bu aşamadan sonra desktop u nasıl çalışır hale getirebiliriz ?

[zeitgeist]

Kod Seç Genişlet

starx

dediğinde ne oluyor?

[snnyk]

Kod Seç Genişlet

starx

dediğinde ne oluyor?

-bash: starx: command not found

[zeitgeist]

Afedersin, yanlış yazmışım, doğrusu şöyle olacaktı:

Kod Seç Genişlet

startx

[snnyk]

Afedersin, yanlış yazmışım, doğrusu şöyle olacaktı:

Kod Seç Genişlet

startx

X: warning; process set to priority -1 instead of requested priority 0

Fatal server error:
Server is already active for display 0
        If this server is no longer running, remove /tmp/.X0-lock
        and start again.

Invalid MIT-MAGIC-COOKIE-1 keygiving up.
xinit:  Resource temporarily unavailable (errno 11):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.

[sema]

..remove /tmp/.X0-lock and start again.

Şimdilik bize söylediğini yapıp sonuca bakabiliriz;

Kod Seç Genişlet

sudo rm -rf /tmp/.X0-lock && sudo reboot

[snnyk]

Şimdilik bize söylediğini yapıp sonuca bakabiliriz;

Kod Seç Genişlet

sudo rm -rf /tmp/.X0-lock && sudo reboot

yine aynı hata

[heartsmagic]

Kod Seç Genişlet

startx -- :1 dediğinde ne oluyor?

[snnyk]

Kod Seç Genişlet

startx -- :1 dediğinde ne oluyor?

Kod Seç Genişlet

X: warning; process set to priority -1 instead of requested priority 0

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.3                       )
Current Operating System: Linux server.xxx.com.tr 2.6.28.7 #1 SMP Fri Mar 20 09:                       23:58 EDT 2009 i686
Build Date: 06 May 2010  09:30:24PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sat Dec 25 04:44:57 2010
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
(EE) intel(0): No valid modes.
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
giving up.
xinit:  Connection reset by peer (errno 104):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.


[heartsmagic]

Çıktılarını kod etiketi içinde verirsen seviniriz.
Herhangi bir xorg.conf yapılandırman var mı?

Kod Seç Genişlet


less /etc/X11/xorg.conf dediğinde karşına ne geliyor?

[snnyk]

Çıktılarını kod etiketi içinde verirsen seviniriz.
Herhangi bir xorg.conf yapılandırman var mı?

Kod Seç Genişlet


less /etc/X11/xorg.conf dediğinde karşına ne geliyor?

Kod Seç Genişlet


# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "us"
EndSection



[bytan]

Tüm dosya içeriği bu kadar mı? Alttakini yürüt ve sonra duruma tekrar bak:

Kod Seç Genişlet

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.yedek

[snnyk]

Tüm dosya içeriği bu kadar mı? Alttakini yürüt ve sonra duruma tekrar bak:

Kod Seç Genişlet

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.yedek

maalesef aynı hata devam ediyor

[sema]

Çıktılarını alabilir miyiz;

Kod Seç Genişlet

sudo dpkg-reconfigure -phigh xserver-xorg && sudo apt-get clean && sudo apt-get autoclean && sudo apt-get autoremove

Kod Seç Genişlet

sudo apt-get update && sudo apt-get install -f

[snnyk]

Çıktılarını alabilir miyiz;

Kod Seç Genişlet

sudo dpkg-reconfigure -phigh xserver-xorg && sudo apt-get clean && sudo apt-get autoclean && sudo apt-get autoremove

Kod Seç Genişlet

sudo apt-get update && sudo apt-get install -f

Kod Seç Genişlet


xserver-xorg postinst warning: overwriting possibly-customised configuration
   file; backup in /etc/X11/xorg.conf.20101225155434
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 59 not upgraded.

---------------------------------------------------------------------------

Hit http://us.archive.ubuntu.com hardy Release.gpg
Ign http://us.archive.ubuntu.com hardy/main Translation-en_US
Ign http://us.archive.ubuntu.com hardy/restricted Translation-en_US
Hit http://security.ubuntu.com hardy-security Release.gpg
Ign http://security.ubuntu.com hardy-security/main Translation-en_US
Ign http://us.archive.ubuntu.com hardy/universe Translation-en_US
Ign http://us.archive.ubuntu.com hardy/multiverse Translation-en_US
Hit http://us.archive.ubuntu.com hardy-updates Release.gpg
Ign http://us.archive.ubuntu.com hardy-updates/main Translation-en_US
Ign http://us.archive.ubuntu.com hardy-updates/restricted Translation-en_US
Ign http://us.archive.ubuntu.com hardy-updates/universe Translation-en_US
Ign http://us.archive.ubuntu.com hardy-updates/multiverse Translation-en_US
Hit http://us.archive.ubuntu.com hardy Release
Ign http://security.ubuntu.com hardy-security/restricted Translation-en_US
Ign http://security.ubuntu.com hardy-security/universe Translation-en_US
Ign http://security.ubuntu.com hardy-security/multiverse Translation-en_US
Hit http://security.ubuntu.com hardy-security Release
Hit http://us.archive.ubuntu.com hardy-updates Release
Hit http://us.archive.ubuntu.com hardy/main Packages
Hit http://security.ubuntu.com hardy-security/main Packages
Hit http://us.archive.ubuntu.com hardy/restricted Packages
Hit http://us.archive.ubuntu.com hardy/main Sources
Hit http://us.archive.ubuntu.com hardy/restricted Sources
Hit http://us.archive.ubuntu.com hardy/universe Packages
Hit http://us.archive.ubuntu.com hardy/universe Sources
Hit http://us.archive.ubuntu.com hardy/multiverse Packages
Hit http://us.archive.ubuntu.com hardy/multiverse Sources
Hit http://security.ubuntu.com hardy-security/restricted Packages
Hit http://security.ubuntu.com hardy-security/main Sources
Hit http://security.ubuntu.com hardy-security/restricted Sources
Hit http://security.ubuntu.com hardy-security/universe Packages
Hit http://security.ubuntu.com hardy-security/universe Sources
Hit http://us.archive.ubuntu.com hardy-updates/main Packages
Hit http://us.archive.ubuntu.com hardy-updates/restricted Packages
Hit http://us.archive.ubuntu.com hardy-updates/main Sources
Hit http://us.archive.ubuntu.com hardy-updates/restricted Sources
Hit http://security.ubuntu.com hardy-security/multiverse Packages
Hit http://security.ubuntu.com hardy-security/multiverse Sources
Hit http://us.archive.ubuntu.com hardy-updates/universe Packages
Hit http://us.archive.ubuntu.com hardy-updates/universe Sources
Hit http://us.archive.ubuntu.com hardy-updates/multiverse Packages
Hit http://us.archive.ubuntu.com hardy-updates/multiverse Sources
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 59 not upgraded.


startx dediğimde yine hatayı verdi 

[sema]

Şunları bunlarsız  (&&) deneyelim, bazı çıktıları merak ettim de. Şunun çıktısını alayım yeniden mümkünse;

Kod Seç Genişlet

sudo apt-get clean ; sudo apt-get autoclean ; sudo apt-get autoremove ; sudo apt-get update ; sudo apt-get install -f ; sudo apt-get upgrade ; sudo apt-get dist-upgrade

[snnyk]

Şunları bunlarsız  (&&) deneyelim, bazı çıktıları merak ettim de. Şunun çıktısını alayım yeniden mümkünse;

Kod Seç Genişlet

sudo apt-get clean ; sudo apt-get autoclean ; sudo apt-get autoremove ; sudo apt-get update ; sudo apt-get install -f ; sudo apt-get upgrade ; sudo apt-get dist-upgrade

Kod Seç Genişlet

4.2.dfsg.P2-2ubuntu0.6_i386.deb) ...
Unpacking replacement bind9-host ...
Preparing to replace dnsutils 1:9.4.2-10ubuntu0.1 (using .../dnsutils_1%3a9.4.2.                                                                             dfsg.P2-2ubuntu0.6_i386.deb) ...
Unpacking replacement dnsutils ...
Preparing to replace file 4.21-3ubuntu1 (using .../file_4.21-3ubuntu2_i386.deb)                                                                              ...
Unpacking replacement file ...
Preparing to replace libmagic1 4.21-3ubuntu1 (using .../libmagic1_4.21-3ubuntu2_                                                                             i386.deb) ...
Unpacking replacement libmagic1 ...
Preparing to replace libdns35 1:9.4.2-10ubuntu0.1 (using .../libdns35_1%3a9.4.2.                                                                             dfsg.P2-2ubuntu0.6_i386.deb) ...
Unpacking replacement libdns35 ...
Preparing to replace libkrb53 1.6.dfsg.3~beta1-2ubuntu1 (using .../libkrb53_1.6.                                                                             dfsg.3~beta1-2ubuntu1.6_i386.deb) ...
Unpacking replacement libkrb53 ...
Preparing to replace libparted1.7-1 1.7.1-5.1ubuntu9.1 (using .../libparted1.7-1                                                                             _1.7.1-5.1ubuntu9.2_i386.deb) ...
Unpacking replacement libparted1.7-1 ...
Preparing to replace parted 1.7.1-5.1ubuntu9.1 (using .../parted_1.7.1-5.1ubuntu                                                                             9.2_i386.deb) ...
Unpacking replacement parted ...
Preparing to replace python-apt 0.7.4ubuntu7.4 (using .../python-apt_0.7.4ubuntu                                                                             7.5_i386.deb) ...
Unpacking replacement python-apt ...
Preparing to replace w3m 0.5.1-5.1ubuntu1 (using .../w3m_0.5.1-5.1ubuntu1.1_i386                                                                             .deb) ...
Unpacking replacement w3m ...
Preparing to replace dpkg-dev 1.14.16.6ubuntu4 (using .../dpkg-dev_1.14.16.6ubun                                                                             tu4.2_all.deb) ...
Unpacking replacement dpkg-dev ...
Preparing to replace fuse-utils 2.7.2-1ubuntu2 (using .../fuse-utils_2.7.2-1ubun                                                                             tu2.1_i386.deb) ...
Unpacking replacement fuse-utils ...
Preparing to replace libfuse2 2.7.2-1ubuntu2 (using .../libfuse2_2.7.2-1ubuntu2.                                                                             1_i386.deb) ...
Unpacking replacement libfuse2 ...
Preparing to replace grub 0.97-29ubuntu21.1 (using .../grub_0.97-29ubuntu21.2_i3                                                                             86.deb) ...
Unpacking replacement grub ...
Preparing to replace installation-report 2.31ubuntu1 (using .../installation-rep                                                                             ort_2.31ubuntu2_all.deb) ...
Unpacking replacement installation-report ...
Preparing to replace libldap-2.4-2 2.4.9-0ubuntu0.8.04.2 (using .../libldap-2.4-                                                                             2_2.4.9-0ubuntu0.8.04.4_i386.deb) ...
Unpacking replacement libldap-2.4-2 ...
Preparing to replace libcurl3-gnutls 7.18.0-1ubuntu2.1 (using .../libcurl3-gnutl                                                                             s_7.18.0-1ubuntu2.2_i386.deb) ...
Unpacking replacement libcurl3-gnutls ...
Preparing to replace libdbus-1-3 1.1.20-1ubuntu3.2 (using .../libdbus-1-3_1.1.20                                                                             -1ubuntu3.3_i386.deb) ...
Unpacking replacement libdbus-1-3 ...
Preparing to replace libexpat1 2.0.1-0ubuntu1 (using .../libexpat1_2.0.1-0ubuntu                                                                             1.1_i386.deb) ...
Unpacking replacement libexpat1 ...
Preparing to replace libglib2.0-0 2.16.6-0ubuntu1.1 (using .../libglib2.0-0_2.16                                                                             .6-0ubuntu1.2_i386.deb) ...
Unpacking replacement libglib2.0-0 ...
Preparing to replace libhtml-parser-perl 3.56-1 (using .../libhtml-parser-perl_3                                                                             .56-1ubuntu0.1_i386.deb) ...
Unpacking replacement libhtml-parser-perl ...
Preparing to replace libwww-perl 5.808-1 (using .../libwww-perl_5.808-1ubuntu0.1                                                                             _all.deb) ...
Unpacking replacement libwww-perl ...
Preparing to replace ntpdate 1:4.2.4p4+dfsg-3ubuntu2.1 (using .../ntpdate_1%3a4.                                                                             2.4p4+dfsg-3ubuntu2.3_i386.deb) ...
Unpacking replacement ntpdate ...
Preparing to replace sudo 1.6.9p10-1ubuntu3.4 (using .../sudo_1.6.9p10-1ubuntu3.                                                                             8_i386.deb) ...
Unpacking replacement sudo ...
Setting up linux-libc-dev (2.6.24-28.81) ...
Setting up libc6-dev (2.7-10ubuntu7) ...
Setting up libc6-i686 (2.7-10ubuntu7) ...

Setting up libbz2-1.0 (1.0.4-2ubuntu4.1) ...

Setting up bzip2 (1.0.4-2ubuntu4.1) ...

Setting up python2.5 (2.5.2-2ubuntu6.1) ...

Setting up apt-utils (0.7.9ubuntu17.2) ...

Setting up cron (3.0pl1-100ubuntu2.1) ...
* Starting periodic command scheduler crond                             [ OK ]

Setting up dhcp3-common (3.0.6.dfsg-1ubuntu9.1) ...
Setting up dhcp3-client (3.0.6.dfsg-1ubuntu9.1) ...

Setting up libklibc (1.5.7-4ubuntu5) ...
Setting up klibc-utils (1.5.7-4ubuntu5) ...
Setting up libgnutls13 (2.0.4-1ubuntu2.6) ...

Setting up libnewt0.52 (0.52.2-11.2ubuntu1.1) ...

Setting up libvolume-id0 (117-8ubuntu0.2) ...
Setting up lsb-release (4.0-0ubuntu0.8.04.1) ...

Setting up udev (117-8ubuntu0.2) ...
update-initramfs: deferring update (trigger activated)

Setting up wget (1.10.2-3ubuntu1.2) ...

Setting up whiptail (0.52.2-11.2ubuntu1.1) ...
Setting up apparmor (2.1+1075-0ubuntu9.2) ...
ls: cannot access /sys/module/apparmor: No such file or directory
ls: cannot access /sys/module/apparmor: No such file or directory
$Loading AppArmor module: Failed.
invoke-rc.d: initscript apparmor, action "start" failed.
ls: cannot access /sys/module/apparmor: No such file or directory
ls: cannot access /sys/module/apparmor: No such file or directory
ls: cannot access /sys/module/apparmor: No such file or directory
$Loading AppArmor module: Failed.
invoke-rc.d: initscript apparmor, action "reload" failed.

Setting up apparmor-utils (2.1+1075-0ubuntu9.2) ...
Setting up bind9-host (1:9.4.2.dfsg.P2-2ubuntu0.6) ...
Setting up dnsutils (1:9.4.2.dfsg.P2-2ubuntu0.6) ...

Setting up libmagic1 (4.21-3ubuntu2) ...

Setting up file (4.21-3ubuntu2) ...
Setting up libdns35 (1:9.4.2.dfsg.P2-2ubuntu0.6) ...
Setting up libkrb53 (1.6.dfsg.3~beta1-2ubuntu1.6) ...

Setting up libparted1.7-1 (1.7.1-5.1ubuntu9.2) ...

Setting up parted (1.7.1-5.1ubuntu9.2) ...
Setting up python-apt (0.7.4ubuntu7.5) ...

Setting up w3m (0.5.1-5.1ubuntu1.1) ...

Setting up dpkg-dev (1.14.16.6ubuntu4.2) ...
Setting up libfuse2 (2.7.2-1ubuntu2.1) ...

Setting up fuse-utils (2.7.2-1ubuntu2.1) ...
creating fuse group...
update-initramfs: deferring update (trigger activated)

Setting up grub (0.97-29ubuntu21.2) ...

Setting up installation-report (2.31ubuntu2) ...

Setting up libdbus-1-3 (1.1.20-1ubuntu3.3) ...

Setting up libexpat1 (2.0.1-0ubuntu1.1) ...

Setting up libglib2.0-0 (2.16.6-0ubuntu1.2) ...

Setting up libhtml-parser-perl (3.56-1ubuntu0.1) ...
Setting up libwww-perl (5.808-1ubuntu0.1) ...
Setting up ntpdate (1:4.2.4p4+dfsg-3ubuntu2.3) ...

Setting up sudo (1.6.9p10-1ubuntu3.8) ...

Setting up libsasl2-modules (2.1.22.dfsg1-18ubuntu2.1) ...
Setting up libsasl2-2 (2.1.22.dfsg1-18ubuntu2.1) ...

Setting up tasksel-data (2.70ubuntu6) ...
Setting up libldap-2.4-2 (2.4.9-0ubuntu0.8.04.4) ...

Setting up libcurl3-gnutls (7.18.0-1ubuntu2.2) ...

Setting up tasksel (2.70ubuntu6) ...

Processing triggers for libc6 ...
ldconfig deferred processing now taking place
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.28.7
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following NEW packages will be installed:
  linux-image-2.6.24-28-server linux-ubuntu-modules-2.6.24-28-server
The following packages will be upgraded:
  linux-image-server linux-server
2 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 24.5MB of archives.
After this operation, 80.7MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://us.archive.ubuntu.com hardy-updates/main linux-image-2.6.24-28-serv                                                                             er 2.6.24-28.81 [18.5MB]
Get:2 http://us.archive.ubuntu.com hardy-updates/main linux-ubuntu-modules-2.6.2                                                                             4-28-server 2.6.24-28.46 [5926kB]
Get:3 http://us.archive.ubuntu.com hardy-updates/restricted linux-server 2.6.24.                                                                             28.30 [26.7kB]
Get:4 http://us.archive.ubuntu.com hardy-updates/main linux-image-server 2.6.24.                                                                             28.30 [26.7kB]
Fetched 24.5MB in 5s (4488kB/s)
Selecting previously deselected package linux-image-2.6.24-28-server.
(Reading database ... 131270 files and directories currently installed.)
Unpacking linux-image-2.6.24-28-server (from .../linux-image-2.6.24-28-server_2.                                                                             6.24-28.81_i386.deb) ...
Done.
Selecting previously deselected package linux-ubuntu-modules-2.6.24-28-server.
Unpacking linux-ubuntu-modules-2.6.24-28-server (from .../linux-ubuntu-modules-2                                                                             .6.24-28-server_2.6.24-28.46_i386.deb) ...
Preparing to replace linux-server 2.6.24.19.21 (using .../linux-server_2.6.24.28                                                                             .30_i386.deb) ...
Unpacking replacement linux-server ...
Preparing to replace linux-image-server 2.6.24.19.21 (using .../linux-image-serv                                                                             er_2.6.24.28.30_i386.deb) ...
Unpacking replacement linux-image-server ...
Setting up linux-image-2.6.24-28-server (2.6.24-28.81) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.24-28-server
Running postinst hook script /sbin/update-grub.
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz
Found kernel: /boot/vmlinuz-2.6.28.7
Found kernel: /boot/vmlinuz-2.6.24-28-server
Updating /boot/grub/menu.lst ... done


Setting up linux-ubuntu-modules-2.6.24-28-server (2.6.24-28.46) ...
update-initramfs: Generating /boot/initrd.img-2.6.24-28-server

Setting up linux-image-server (2.6.24.28.30) ...
Setting up linux-server (2.6.24.28.30) ...


işlemlerden sonra reboot edip tekrar startx denedim değişen * bir şey yok maalesef

[eribol]

Kod Seç Genişlet

mv .Xauthority .Xauthority2komutunu verip tekrar dener misiniz?

[snnyk]

Kod Seç Genişlet

mv .Xauthority .Xauthority2komutunu verip tekrar dener misiniz?

Kod Seç Genişlet

root@server:~# mv .Xauthority .Xauthority2
root@server:~# startx
xauth:  creating new authority file /root/.Xauthority
xauth:  creating new authority file /root/.Xauthority

Fatal server error:
Server is already active for display 0
        If this server is no longer running, remove /tmp/.X0-lock
        and start again.


Invalid MIT-MAGIC-COOKIE-1 keygiving up.
xinit:  Resource temporarily unavailable (errno 11):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.


[eribol]

Yine başa dönmüş gibi. Yeniden başlatmadan

Kod Seç Genişlet

rm /tmp/.X0-lock && startx

[snnyk]

Yine başa dönmüş gibi. Yeniden başlatmadan

Kod Seç Genişlet

rm /tmp/.X0-lock && startx

Kod Seç Genişlet

X: warning; process set to priority -1 instead of requested priority 0

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.3)
Current Operating System: Linux server.hbb.com.tr 2.6.24-28-server #1 SMP Wed Nov 24 10:04:43 UTC 2010 i686
Build Date: 06 May 2010  09:30:24PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 25 17:48:26 2010
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
(EE) intel(0): No valid modes.
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
giving up.
xinit:  Connection reset by peer (errno 104):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.


[sema]

@snnyk, yanlış mı gördüm? Hardy mi kullanıyoruz? Çıktısına bakayım;

Kod Seç Genişlet

cat /etc/apt/sources.list

[snnyk]

@snnyk, yanlış mı gördüm? Hardy mi kullanıyoruz? Çıktısına bakayım;

Kod Seç Genişlet

cat /etc/apt/sources.list

hardy heron evet

Kod Seç Genişlet

#
# deb cdrom:[Ubuntu-Server 8.04 _Hardy Heron_ - Release i386 (20080423.2)]/ hard                                                        y main restricted

#deb cdrom:[Ubuntu-Server 8.04 _Hardy Heron_ - Release i386 (20080423.2)]/ hardy                                                         main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.

deb http://us.archive.ubuntu.com/ubuntu/ hardy main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ hardy main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://us.archive.ubuntu.com/ubuntu/ hardy-updates main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ hardy-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
deb http://us.archive.ubuntu.com/ubuntu/ hardy universe
deb-src http://us.archive.ubuntu.com/ubuntu/ hardy universe
deb http://us.archive.ubuntu.com/ubuntu/ hardy-updates universe
deb-src http://us.archive.ubuntu.com/ubuntu/ hardy-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://us.archive.ubuntu.com/ubuntu/ hardy multiverse
deb-src http://us.archive.ubuntu.com/ubuntu/ hardy multiverse
deb http://us.archive.ubuntu.com/ubuntu/ hardy-updates multiverse
deb-src http://us.archive.ubuntu.com/ubuntu/ hardy-updates multiverse

## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://us.archive.ubuntu.com/ubuntu/ hardy-backports main restricted unive                                                        rse multiverse
# deb-src http://us.archive.ubuntu.com/ubuntu/ hardy-backports main restricted u                                                        niverse multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository. This software is not part of Ubuntu, but is
## offered by Canonical and the respective vendors as a service to Ubuntu
## users.
# deb http://archive.canonical.com/ubuntu hardy partner
# deb-src http://archive.canonical.com/ubuntu hardy partner

deb http://security.ubuntu.com/ubuntu hardy-security main restricted
deb-src http://security.ubuntu.com/ubuntu hardy-security main restricted
deb http://security.ubuntu.com/ubuntu hardy-security universe
deb-src http://security.ubuntu.com/ubuntu hardy-security universe
deb http://security.ubuntu.com/ubuntu hardy-security multiverse
deb-src http://security.ubuntu.com/ubuntu hardy-security multiverse


[bytan]

@snnyk,

Sistemde root harici başka kullanıcı var mı? O kullanıcıyla da yine X'i deneme imkanın var mı?

[sema]

Şunun da çıktısını görebilir miyiz;

Kod Seç Genişlet

cat /etc/X11/xorg.conf