Sensors sorunu

[eguven]

Merhaba arkadaşlar,

Terminal'e sensors yazdığım zaman,

Kod Seç Genişlet

No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

çıktısı veriyor.

sensor-detect komutu ile ayarladıktan sonra tekrar denedim, aynı sonuç. Sensors-detect işlem çıktısı şöyle:

Kod Seç Genişlet

# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: Acer Aspire 5741G (laptop)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
Intel Core family thermal sensor...                         No
Intel Atom thermal sensor...                                No
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3.
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.

Next adapter: nouveau-0000:01:00.0-2 (i2c-0)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x28
Probing for `National Semiconductor LM78'...                No
Probing for `National Semiconductor LM79'...                No
Probing for `National Semiconductor LM80'...                No
Probing for `Winbond W83781D'...                            No
Probing for `Winbond W83782D'...                            No
Probing for `Winbond W83627HF'...                           No
Probing for `Winbond W83627EHF'...                          No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'...        No
Probing for `Asus AS99127F (rev.1)'...                      No
Probing for `Asus AS99127F (rev.2)'...                      No
Probing for `Asus ASB100 Bach'...                           No
Probing for `Analog Devices ADM1029'...                     No
Probing for `ITE IT8712F'...                                No
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                Yes
    (confidence 8, not a hardware monitoring chip)

Next adapter: nouveau-0000:01:00.0-6 (i2c-1)
Do you want to scan it? (YES/no/selectively): YES

Next adapter: nouveau-0000:01:00.0-0 (i2c-2)
Do you want to scan it? (YES/no/selectively): YES

Sorry, no sensors were detected.
This is relatively common on laptops, where thermal management is
handled by ACPI rather than the OS.


[ufuk_k]

Servis çalışıyor mu acaba, çalıştırıp bir tekrar dene:

Kod Seç Genişlet

sudo /etc/init.d/lm-sensors start

Kod Seç Genişlet

sensors

[eguven]

Baktım. Çalışıyor...

[ufuk_k]

Kod Seç Genişlet

cat /etc/modules ve

Kod Seç Genişlet

lspci çıktılarını buraya aktarır mısın?

[GAREZ]

Ayni sorun asrock i945GZ anakarttada var caresi yok gibi... ©

[eguven]

Ayni sorun asrock i945GZ anakarttada var caresi yok gibi... ©

Hiç çözülmezmi bu sorun. :S

[GAREZ]

Kod Seç Genişlet

cat /etc/modules ve

Kod Seç Genişlet

lspci çıktılarını buraya aktarır mısın?

denedin mi

Ayni sorun asrock i945GZ anakarttada var caresi yok gibi... ©

Hiç çözülmezmi bu sorun. :S

o komutu denedin mi?

[Sherlock Holmes]

Depoda bulunan lm-sensors yüklümü'ki.?

[eguven]

Depoda bulunan lm-sensors yüklümü'ki.?

Evet... Kurulu.

[Sherlock Holmes]

Evet... Kurulu.

http://ubuntuforums.org/showthread.php?t=2780

[eguven]

Evet... Kurulu.

http://ubuntuforums.org/showthread.php?t=2780

maaleseft işe yaramadı


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 27 Ağustos 2010 - 15:30:14

Kod Seç Genişlet

cat /etc/modules ve

Kod Seç Genişlet

lspci çıktılarını buraya aktarır mısın?

Çıktılar:

Kod Seç Genişlet

ertan@ertan-laptop:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a "#", and everything on the line after them are ignored.

psmouse
mousedev
ide-cd
ide-disk
ide-generic
lp

#For lm-sensors, i2c modules
it87
i2c-viapro
i2c-isa

#end of file!
ertan@ertan-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter
00:03.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 40)
00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service
00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
ertan@ertan-laptop:~$