edimax 7711umn

[2-33]

merhaba

benim 1 tane usb wirelessim var.driverını falan buldum ama nasıl yükleneceğini bilmiyorum yardımcı olabilirmisiniz?

driver linki http://www.edimax.com/images/Image/driver/Linux%20driver/Wireless/nlite%20USB%20adaptor/RT3070_Linux_STA_v2.0.1.0.tar.zip

[heartsmagic]

Kod Seç Genişlet

lsusb çıktısını görebilir miyiz?

[2-33]

Kod Seç Genişlet

deniz@2-33:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 7392:7711 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[heartsmagic]

Şurada yaptırdığımızı bir de sen dene bakalım:
http://forum.ubuntu-tr.net/index.php/topic,21083.0.html

[2-33]

Şurada yaptırdığımızı bir de sen dene bakalım:
http://forum.ubuntu-tr.net/index.php/topic,21083.0.html

benim drever cdsindeki dosyalar farklı.cdsini şimdi buldum içinde linux driver ama hiç read me dosyasından bişey anlamadım.

read me dosyasında şunlar yazıyor

Kod Seç Genişlet

* README
*
* Ralink Tech Inc.
*
* http://www.ralinktech.com
*

=======================================================================
ModelName:
===========
RT2870 Wireless Lan Linux Driver


=======================================================================
Driver lName:
===========
rt2870.o/rt2870.ko


=======================================================================
Supporting Kernel:
===================
linux kernel 2.4 and 2.6 series.
Tested in Redhat 7.3 or later.


=======================================================================
Ralink Hardware:
===================
Ralink 802.11n Wireless LAN Card.


=======================================================================
Description:
=============
This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card.


=======================================================================
Contents:
=============
Makefile         : Makefile
*.c : c files
*.h : header files


=======================================================================
Features:
==========
   This driver implements basic IEEE802.11. Infrastructure and adhoc mode with
   open or shared or WPA-PSK or WPA2-PSK authentication method.
   NONE, WEP, TKIP and AES encryption.


=======================================================================
Build Instructions: 
====================

1> $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
    go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.
   
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.

3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
   => #>cd wpa_supplicant-x.x
   => #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
   Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
   => #>cd wpa_supplicant-0.5.7
   => #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d

4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
  => $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c

5> $cp RT2870STA.dat  /etc/Wireless/RT2870STA/RT2870STA.dat
   
6> load driver, go to "os/linux/" directory.
    #[kernel 2.4]
    #    $/sbin/insmod rt2870sta.o
    #    $/sbin/ifconfig ra0 inet YOUR_IP up
       
    #[kernel 2.6]
    #    $/sbin/insmod rt2870sta.ko
    #    $/sbin/ifconfig ra0 inet YOUR_IP up

7> unload driver   
    $/sbin/ifconfig ra0 down
$/sbin/rmmod rt2870sta

=======================================================================
CONFIGURATION: 
====================
RT2870 driver can be configured via following interfaces,
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration file

i)  iwconfig comes with kernel. 
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)modify configuration file "RT2870STA.dat" in /etc/Wireless/RT2870STA/RT2870STA.dat.
           
Configuration File : RT2870STA.dat
---------------------------------------
# Copy this file to /etc/Wireless/RT2870STA/RT2870STA.dat
# This file is a binary file and will be read on loading rt.o module.
#
# Use "vi RT2870STA.dat" to modify settings according to your need.
#
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.
#
#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0

-----------------------------------------------
*NOTE:
WMM parameters
WmmCapable Set it as 1 to turn on WMM Qos support
AckPolicy1~4 Ack policy which support normal Ack or no Ack
(AC_BK, AC_BE, AC_VI, AC_VO)

All WMM parameters do not support iwpriv command but ¡¥WmmCapable¡¦¡¦,
please store all parameter to RT2870STA.dat, and restart driver.

-----------------------------------------------
syntax is 'Param'='Value' and describes below.

@> CountryRegion=value                                 
value
0: use 1 ~ 11 Channel
1: use 1 ~ 13 Channel
2: use 10 ~ 11 Channel
3: use 10 ~ 13 Channel
4: use 14 Channel
5: use 1 ~ 14 Channel
6: use 3 ~ 9 Channel
7: use 5 ~ 13 Channel
   31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)
                                         
@> CountryRegionABand=value     
value
0: use 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 Channel
1: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Channel
2: use 36, 40, 44, 48, 52, 56, 60, 64 Channel
3: use 52, 56, 60, 64, 149, 153, 157, 161 Channel
4: use 149, 153, 157, 161, 165 Channel
5: use 149, 153, 157, 161 Channel
6: use 36, 40, 44, 48 Channel
7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel
8: use 52, 56, 60, 64 Channel
9: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 Channel
   10: use 36, 40, 44, 48, 149, 153, 157, 161, 165 Channel
   11: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 Channel

@> CountryCode=value
value
AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE,
GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, KR, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
"" => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165
                                                           
@> SSID=value               
value
0~z, 1~32 ascii characters.
                   
@> WirelessMode=value
value
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only         //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
3: legacy 11a/b/g mixed     //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
   10: 11AGN mixed
                     
@> Channel=value
value
depends on CountryRegion or CountryRegionABand
                   
@> BGProtection=value
value
0: Auto
1: Always on
2: Always off
                   
@> TxPreamble=value
  value
0:Preamble Long
1:Preamble Short
2:Auto
                   
@> RTSThreshold=value
value
1~2347                                                       
                                                           
@> FragThreshold=value
value       
256~2346
                   
@> TxBurst=value
value
0: Disable
1: Enable

@> NetworkType=value    
value
Infra: infrastructure mode
        Adhoc: adhoc mode
                                                                                                                                                                                                                 
@> AuthMode=value
value
OPEN For open system
SHARED   For shared key system
WEPAUTO     Auto switch between OPEN and SHARED
WPAPSK      For WPA pre-shared key  (Infra)
WPA2PSK     For WPA2 pre-shared key (Infra)
WPANONE For WPA pre-shared key  (Adhoc)
WPA         Use WPA-Supplicant
WPA2        Use WPA-Supplicant

@> EncrypType=value
value
NONE For AuthMode=OPEN                   
WEP For AuthMode=OPEN or AuthMode=SHARED
TKIP For AuthMode=WPAPSK or WPA2PSK                   
AES For AuthMode=WPAPSK or WPA2PSK                     

@> DefaultKeyID=value
value
1~4

@> Key1=value
    Key2=value
    Key3=value
    Key4=value
value
10 or 26 hexadecimal characters eg: 012345678
        5 or 13 ascii characters eg: passd
    (usage : "iwpriv" only)     

@> Key1Type=vaule
    Key2Type=value
    Key3Type=vaule
    Key4Type=vaule
    value
0   hexadecimal type
1   assic type
    (usage : reading profile only)

@> Key1Str=value
    Key2Str=value
    Key3Str=vaule
    Key4Str=vaule
    value
10 or 26 characters (key type=0)
5 or 13 characters  (key type=1)
    (usage : reading profile only)

@> WPAPSK=value             
value
8~63 ASCII  or
64 HEX characters
                   
@> WmmCapable=value
value
0: Disable WMM
1: Enable WMM
       
@> PSMode=value
    value
    CAM     Constantly Awake Mode
Max_PSP     Max Power Savings
Fast_PSP Power Save Mode

@> FastRoaming=value
value
0 Disabled
1 Enabled

@> RoamThreshold=value
value
Positive Interger(dBm)

@> HT_RDG=value
value
0 Disabled
1 Enabled

@> HT_EXTCHA=value (Extended Channel Switch Announcement)
value
0 Below
1 Above

@> HT_OpMode=value
value
0 HT mixed format
1 HT greenfield format

@> HT_MpduDensity=value
value (based on 802.11n D2.0)
0: no restriction
1: 1/4 £gs
2: 1/2 £gs
3: 1 £gs
4: 2 £gs
5: 4 £gs
6: 8 £gs
7: 16 £gs

@> HT_BW=value
value
0 20MHz
1 40MHz

@> HT_AutoBA=value
value
0 Disabled
1 Enabled

@> HT_BADecline
value
0 Disabled
1     Enabled <Reject BA request from AP>

@> HT_AMSDU=value
value
0 Disabled
1 Enabled

@> HT_BAWinSize=value
value
1 ~ 64

@> HT_GI=value
value
0 long GI
1 short GI

@> HT_MCS=value
value
0 ~ 15
33: auto

@> HT_MIMOPSMode=value
value (based on 802.11n D2.0)
0 Static SM Power Save Mode
1 Dynamic SM Power Save Mode
2 Reserved
3 SM enabled
(not fully support yet)

@> EthConvertMode=value
value
dongle
clone
hybrid

@> EthCloneMac=value
value
xx:xx:xx:xx:xx:xx

@> IEEE80211H=value
value
0 Disabled
1 Enabled

@> TGnWifiTest=value
value
0 Disabled
1 Enabled

@> WirelessEvent=value
value
0 Disabled
1 Enabled <send custom wireless event>
   
@> MeshId=value
value
Length 1~32 ascii characters

@> MeshAutoLink=value
value
0 Disabled
1 Enabled

@> MeshAuthMode=value
value
OPEN For open system
WPANONE For WPA pre-shared key  (Adhoc)

@> MeshEncrypType=value
value
NONE For MeshAuthMode=OPEN                   
WEP For MeshAuthMode=OPEN
TKIP For MeshAuthMode=WPANONE
AES For MeshAuthMode=WPANONE

@> MeshWPAKEY=value
value
8~63 ASCII  or
64 HEX characters

@> MeshDefaultkey=value
value
1~4

@> MeshWEPKEY=value
value
10 or 26 characters
5 or 13 characters

@> CarrierDetect=value
value
0 Disabled
1 Enabled

MORE INFORMATION
=================================================================================
If you want for rt2870 driver to auto-load at boot time:
A) choose ra0 for first RT2870 WLAN card, ra1 for second RT2870 WLAN card, etc.
   
B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/,     
   edit( or add the line) in /etc/modules.conf:
       alias ra0 rt2870sta
   
C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0 
   DEVICE='ra0'
   ONBOOT='yes'     


NOTE:
   if you use dhcp, add this line too .
    BOOTPROTO='dhcp'

*D) To ease the Default Gateway setting,
    add the line
    GATEWAY=x.x.x.x   
    in /etc/sysconfig/network
   
=======================================================================
Dongle/Clone Features:
======================
A) Dongle mode:
    Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
    can transparently connect to the AP.

B) Clone mode:
Provides a 1-to-1 MAC address mapping mechanism.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
    use source MAC of first packet coming from wired device as SA MAC.
NOTE: In this mode, only the PC who own the specified MAC can connect to the AP.


C) Hybrid mode(Dongle+Clone):
Provides a 1-to-N MAC address mapping mechanism such that more than one PC behind the STA
    can transparently connect to the AP.
STA can use own MAC as SA MAC or
use user desired MAC as SA MAC or
    use source MAC of first packet coming from wired device as SA MAC.

D) Please refer to "Config STA to link as dongle mode..." in iwpriv_usage.txt for releated commands.

[heartsmagic]

Sen orada anlatılanı denedin mi?

[2-33]

@heartsmagic yeni olduğum için bişey anlayamıyorum onun için deneyemedim.

[heartsmagic]

http://forum.ubuntu-tr.net/index.php/topic,21083.msg254668.html#msg254668 bu iletide anlattım. Yapacağın şey basit, dosyaları açıp verdiği şeyleri ekleyeceksin. Komutları Uygulamalar-Donatılar-Uçbirim ile açacağın ekranda uygulayacaksın. Sana parolanı sorar, gir. Girerken görünmez.

[2-33]

@heartsmagic verdiği adımları uyguluorum ancak daha ilk adımda konsolda şöyle bi hata veriyo

Kod Seç Genişlet

deniz@2-33:~$ tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
tar: DPB_RT2870_Linux_STA_x.x.x.x.tgz: open olanaksız: No such file or directory
tar: Hata kurtarılabilir değil: şimdilik çıkılıyor
tar: Child returned status 2
tar: Önceki hatalardan dolayı hata durumlarıyla çıkılıyor


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 18 Temmuz 2010 - 16:02:41
buda cdsindeki driverı

http://hotfile.com/dl/55842521/25b2628/2009_0525_RT3070_Linux_STA_v2.1.1.0.rar.html

[heartsmagic]

Hangi adımlar? Ben böyle bir anlatım yapmamışım ki @2-33. Bir önceki iletimde verdiğim bağlantıya, yani doğrudan benim tek iletide anlattığım şeye baktın mı? 

http://forum.ubuntu-tr.net/index.php/topic,21083.msg254668.html#msg254668

[2-33]

@heartsmagic baktım ama daha yeni olduğum için kodlardan pek bişey anlamıyorum.

[heartsmagic]

@2-33, anlamayacak bir şey yok, orada anlattım ben her şeyi.

Kod Seç Genişlet

sudo gedit /etc/modprobe.d/blacklist.conf ile dosyayı aç ve en alt satıra şunu ekle:

blacklist rt2800usb

Kod Seç Genişlet

sudo gedit /etc/modules ile dosyayı aç ve:

rt2870sta

ekle. Ardından sistemi yeniden başlat.

Bu komutları da Uygulamalar-Donatılar-Uçbirim ile açacağın ekrana yazacaksın. Sana şifre soracak, normal kullanıcı parolanı yazacaksın.

[2-33]

@ heartsmagic dediklerini yaptım ama yinede tanımadı.

[heartsmagic]

Dosyaları sağlıklı bir şekilde değiştirip, sistemi yeniden başlattın mı?

Kod Seç Genişlet

lsmod | grep rt ne diyor?

[2-33]

Kod Seç Genişlet

deniz@2-33:~$ lsmod | grep rt
rt2870sta             525366  0
parport_pc             29958  1
parport                37160  3 ppdev,parport_pc,lp


[heartsmagic]

Kod Seç Genişlet

ifconfig
iwconfig
iwlist scanning ne diyor?

[2-33]

ifconfig

Kod Seç Genişlet

deniz@2-33:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:8c:85:59:ca 
          inet addr:192.168.2.2  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::224:8cff:fe85:59ca/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1128 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1279 errors:0 dropped:0 overruns:0 carrier:2
          collisions:0 txqueuelen:1000
          RX bytes:810921 (810.9 KB)  TX bytes:274239 (274.2 KB)
          Interrupt:27

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:720 (720.0 B)  TX bytes:720 (720.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:1f:1f:83:40:32 
          inet6 addr: fe80::21f:1fff:fe83:4032/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:28 errors:0 dropped:0 overruns:0 frame:0
          TX packets:117 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3159 (3.1 KB)  TX bytes:7956 (7.9 KB)

iwconfig

Kod Seç Genişlet

deniz@2-33:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

vboxnet0  no wireless extensions.

wlan0     RTxx70 Wireless  ESSID:""  Nickname:"RT3070STA"
          Mode:Auto  Frequency=2.412 GHz  Access Point: Not-Associated   
          Bit Rate:1 Mb/s   
          RTS thr:off   Fragment thr:off
          Link Quality=10/100  Signal level:0 dBm  Noise level:-97 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


iwlist scanning

Kod Seç Genişlet

deniz@2-33:~$ iwlist scanning
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

vboxnet0  Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 00:23:8E:79:96:B2
                    Protocol:802.11b/g
                    ESSID:"normal"
                    Mode:Managed
                    Channel:11
                    Quality:18/100  Signal level:-83 dBm  Noise level:-97 dBm
                    Encryption key:on
                    Bit Rates:54 Mb/s
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: 00:1C:A8:1F:82:4D
                    Protocol:802.11b/g
                    ESSID:"ZAFER"
                    Mode:Managed
                    Channel:11
                    Quality:26/100  Signal level:-79 dBm  Noise level:-97 dBm
                    Encryption key:on
                    Bit Rates:22 Mb/s
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK



[eribol]

Şu anda sağlıklı bir şekilde kablosuz ağlar görülüyor. Sorun ne kaldı şu an?

[2-33]

adresteki sürücüyü yüklemeyi bilmiyorum.

http://www.edimax.com/images/Image/driver/Linux%20driver/Wireless/nlite%20USB%20adaptor/RT3070_Linux_STA_v2.0.1.0.tar.zip

[bytan]

Şu an aygıtın zaten çalışıyor görünüyor. Ayrıca oradaki sürücüyü yüklemekte özel bir sebebin var mı? Sonuçta elde edeceğin çıktılar şu an elde ettiklerin gibi olacaktır.

[2-33]

aygıt çalışıyo gözüküyo diyosunda kablosuz ağları bulamıyor.

[bytan]

Çevrende Zafer ve normal adında iki ağ var görünüyor? Yanlış mı?

[2-33]

evet onlar.ama listelerini göremiyorum.bi kaç yerden araştırdım wicd diye bi program duydum yükledim ama ondada liste göstermiyor.

[bytan]

Wicd ile de görünmüyor mu o iki kablosuz bağlantı?

Elle bağlanmayı da deneyebilirsin:

http://forum.ubuntu-tr.net/index.php/topic,2748.0.html
http://forum.ubuntu-tr.net/index.php/topic,1768.0.html

[2-33]

wicdde görmüyor.