Program kurarken ve kaldırırken hata

[crazyboy_xhan]

Selamun aleykum arkadaşlar Program Kurarken veya kaldırırken hata alıyorum

Önceki kurulum tamamlanmadı

Yükleme işlemi ilgili yazılım paketindeki bir hata yüzünden veya uygun olmayan bir biçimde kapatılmasından dolayı başarısız olmuş olabilir. Başka bir yazılım yüklemeden veya kaldırmadan önce bu durumu düzeltmelisiniz

Yukardaki hatayı veriyor sürekle 10.4 kullanıyorum lütfen yardım edin şimdiden çok çok teşekkür ederim ilgisi olan herkese

[bytan]

Alttakinin çıktısı ne diyor?

Kod Seç Genişlet

sudo apt-get install -f

[tirit]

Bende de hata veriyor fakat nihayetinde yüklenmiş veya kaldırılmış oluyor programlar. Boş bir hata bildirimi yani benimkisi

Hata şu şekilde:
Package operation failed
The installation or removal of a software package failed.

Kod Seç Genişlet

installArchives() failed: Preconfiguring packages ...

Preconfiguring packages ...

Selecting previously deselected package anthy.

(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 221397 files and directories currently installed.)

Unpacking anthy (from .../anthy_9100h-0ubuntu2_i386.deb) ...

Selecting previously deselected package kasumi.

Unpacking kasumi (from .../archives/kasumi_2.5-1_i386.deb) ...

Processing triggers for python-gmenu ...

Rebuilding /usr/share/applications/desktop.en_US.UTF8.cache...

Processing triggers for desktop-file-utils ...

Processing triggers for man-db ...

Processing triggers for menu ...

Processing triggers for python-support ...

Setting up usbmuxd (1.0.2-1ubuntu2) ...

Adding system user `usbmux' (UID 115) ...

Adding new user `usbmux' (UID 115) with group `plugdev' ...

useradd: cannot lock /etc/passwd; try again later.

adduser: `/usr/sbin/useradd -d /home/usbmux -g plugdev -s /bin/false -u 115 usbmux' returned error code 1. Exiting.

dpkg: error processing usbmuxd (--configure):

subprocess installed post-installation script returned error exit status 1

dpkg: dependency problems prevent configuration of libimobiledevice0:

libimobiledevice0 depends on usbmuxd; however:

  Package usbmuxd is not configured yet.

dpkg: error processing libimobiledevice0 (--configure):

dependency problems - leaving unconfigured

dpkg: dependency problems prevent configuration of gvfs-backends:

gvfs-backends depends on libimobiledevice0 (>= 0.9.7); however:

  Package libimobiledevice0 is not configured yet.

dpkg: error processing gvfs-backends (--configure):

dependency problems - leaving unconfigured

dpkg: dependency problems prevent configuration of libgpod4:

libgpod4 depends No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
on libimobiledevice0 (>= 0.9.7); however:

  Package libimobiledevice0 is not configured yet.

dpkg: error processing libgpod4 (--configure):

dependency problems - leaving unconfigured

dpkg: dependency problems prevent configuration of libgpod-common:

libgpod-common depends on libgpod4-nogtk (>= 0.7.90) | libgpod4 (>= 0.7.90); however:

  Package libgpod4-nogtk is not installed.

  Package libgpod4 is not configured yet.

libgpod-common depends on libimobiledevice0 (>= 0.9.7); however:

  Package libimobiledevice0 is not configured yet.

dpkg: error processing libgpod-common (--configure):

dependency problems - leaving unconfigured

Setting up openssh-server (1:5.3p1-3ubuntu4) ...

useradd: cannot lock /etc/passwd; try again later.

adduser: `/usr/sbin/useradd -d /var/run/sshd -g nogroup -s /usr/sbin/nologin -u 115 sshd' returned error code 1. Exiting.

dpkg: error processing openssh-server (--configure):

subprocess installed post-installation script returned error exit status 1

Setting up rtkit (0.6-0ubuntu1) ...

No apport report written because MaxReports is reached already
useradd: cannot lock /etc/passwd; try again later.

adduser: `/usr/sbin/useradd -d /proc -g rtkit -s /bin/false -u 115 rtkit' returned error code 1. Exiting.

dpkg: error processing rtkit (--configure):

subprocess installed post-installation script returned error exit status 1

dpkg: dependency problems prevent configuration of ssh:

ssh depends on openssh-server; however:

  Package openssh-server is not configured yet.

dpkg: error processing ssh (--configure):

dependency problems - leaving unconfigured

Setting up zemberek-server (0.7.1-12) ...

No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
useradd: cannot lock /etc/passwd; try again later.

adduser: `/usr/sbin/useradd -d /tmp -g zemberek -s /bin/false -u 115 zemberek' returned error code 1. Exiting.

dpkg: error processing zemberek-server (--configure):

subprocess installed post-installation script returned error exit status 1

dpkg: dependency problems prevent configuration of zpspell:

zpspell depends on zemberek-server; however:

  Package zemberek-server is not configured yet.

dpkg: error processing zpspell (--configure):

dependency problems - leaving unconfigured

Setting up anthy (9100h-0ubuntu2) ...

No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
Updating anthy.dic...file name prefix=[./] you can change this by -p option.

  copying .///mkworddic/anthy.wdic (word_dic)

  copying .///depgraph/anthy.dep (dep_dic)

  copying .///calctrans/anthy.trans_info (trans_info)

  copying .///calctrans/anthy.cand_info (cand_info)

  copying .///calctrans/anthy.weak_words (weak_words)

  copying .///calctrans/anthy.corpus_bucket (corpus_bucket)

  copying .///calctrans/anthy.corpus_array (corpus_array)

/usr/bin/mkfiledic done.

done.



Setting up kasumi (2.5-1) ...



Processing triggers for menu ...

Errors were encountered while processing:

usbmuxd

libimobiledevice0

gvfs-backends

libgpod4

libgpod-common

openssh-server

rtkit

ssh

zemberek-server

zpspell

Setting up rtkit (0.6-0ubuntu1) ...

useradd: cannot lock /etc/passwd; try again later.

adduser: `/usr/sbin/useradd -d /proc -g rtkit -s /bin/false -u 115 rtkit' returned error code 1. Exiting.

dpkg: error processing rtkit (--configure):

subprocess installed post-installation script returned error exit status 1

Setting up openssh-server (1:5.3p1-3ubuntu4) ...

useradd: cannot lock /etc/passwd; try again later.

adduser: `/usr/sbin/useradd -d /var/run/sshd -g nogroup -s /usr/sbin/nologin -u 115 sshd' returned error code 1. Exiting.

dpkg: error processing openssh-server (--configure):

subprocess installed post-installation script returned error exit status 1

Setting up zemberek-server (0.7.1-12) ...

useradd: cannot lock /etc/passwd; try again later.

adduser: `/usr/sbin/useradd -d /tmp -g zemberek -s /bin/false -u 115 zemberek' returned error code 1. Exiting.

dpkg: error processing zemberek-server (--configure):

subprocess installed post-installation script returned error exit status 1

dpkg: dependency problems prevent configuration of zpspell:

zpspell depends on zemberek-server; however:

  Package zemberek-server is not configured yet.

dpkg: error processing zpspell (--configure):

dependency problems - leaving unconfigured

Setting up usbmuxd (1.0.2-1ubuntu2) ...

Adding system user `usbmux' (UID 115) ...

Adding new user `usbmux' (UID 115) with group `plugdev' ...

useradd: cannot lock /etc/passwd; try again later.

adduser: `/usr/sbin/useradd -d /home/usbmux -g plugdev -s /bin/false -u 115 usbmux' returned error code 1. Exiting.

dpkg: error processing usbmuxd (--configure):

subprocess installed post-installation script returned error exit status 1

dpkg: dependency problems prevent configuration of ssh:

ssh depends on openssh-server; however:

  Package openssh-server is not configured yet.

dpkg: error processing ssh (--configure):

dependency problems - leaving unconfigured

dpkg: dependency problems prevent configuration of libimobiledevice0:

libimobiledevice0 depends on usbmuxd; however:

  Package usbmuxd is not configured yet.

dpkg: error processing libimobiledevice0 (--configure):

dependency problems - leaving unconfigured

dpkg: dependency problems prevent configuration of libgpod-common:

libgpod-common depends on libimobiledevice0 (>= 0.9.7); however:

  Package libimobiledevice0 is not configured yet.

dpkg: error processing libgpod-common (--configure):

dependency problems - leaving unconfigured

dpkg: dependency problems prevent configuration of libgpod4:

libgpod4 depends on libimobiledevice0 (>= 0.9.7); however:

  Package libimobiledevice0 is not configured yet.

dpkg: error processing libgpod4 (--configure):

dependency problems - leaving unconfigured

dpkg: dependency problems prevent configuration of gvfs-backends:

gvfs-backends depends on libimobiledevice0 (>= 0.9.7); however:

  Package libimobiledevice0 is not configured yet.

dpkg: error processing gvfs-backends (--configure):

dependency problems - leaving unconfigured



[sema]

@bytan'ın verdiği komutu denediniz mi? Şunları da dener misiniz?

Kod Seç Genişlet

sudo aptitude clean
sudo aptitude update
sudo aptitude dist-upgrade


Yüklü değilse şunu da yüklerseniz iyi olur.

Kod Seç Genişlet

sudo apt-get install ubuntu-restricted-extras

[tirit]

İlk olarak sema'nın dediklerini yaptım.
Sonra da bytan'ın istediği kodu yazdım, çıktısı:

Kod Seç Genişlet

efekan@efekan-laptop:~$ sudo apt-get install -f
[sudo] password for efekan:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
10 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up usbmuxd (1.0.2-1ubuntu2) ...
Adding system user `usbmux' (UID 115) ...
Adding new user `usbmux' (UID 115) with group `plugdev' ...
useradd: cannot lock /etc/passwd; try again later.
adduser: `/usr/sbin/useradd -d /home/usbmux -g plugdev -s /bin/false -u 115 usbmux' returned error code 1. Exiting.
dpkg: error processing usbmuxd (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of libimobiledevice0:
libimobiledevice0 depends on usbmuxd; however:
  Package usbmuxd is not configured yet.
dpkg: error processing libimobiledevice0 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of gvfs-backends:
gvfs-backends depends on libimobiledevice0 (>= 0.9.7); however:
  Package libimobiledevice0 is not configured yet.
dpkg: error processing gvfs-backends (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libgpod4:
libgpod4 depends on libimobiledevice0 (>= 0.9.7); however:
  Package libimobiledevice0 is not configured yet.
dpkg: error processing libgpod4 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libgpod-common:
libgpod-common depends on libgpod4-nogtk (>= 0.7.90) | libgpod4 (>= 0.7.90); however:
  Package libgpod4-nogtk is not installed.
  PackageNo apport report written because the error message indicates its a followup error from a previous failure.
                                   No apport report written because the error message indicates its a followup error from a previous failure.
                                                             No apport report written because MaxReports is reached already
                                           No apport report written because MaxReports is reached already
                          libgpod4 is not configured yet.
libgpod-common depends on libimobiledevice0 (>= 0.9.7); however:
  Package libimobiledevice0 is not configured yet.
dpkg: error processing libgpod-common (--configure):
dependency problems - leaving unconfigured
Setting up openssh-server (1:5.3p1-3ubuntu4) ...
useradd: cannot lock /etc/passwd; try again later.
adduser: `/usr/sbin/useradd -d /var/run/sshd -g nogroup -s /usr/sbin/nologin -u 115 sshd' returned error code 1. Exiting.
dpkg: error processing openssh-server (--configure):
subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up rtkit (0.6-0ubuntu1) ...
useradd: cannot lock /etc/passwd; try again later.
adduser: `/usr/sbin/useradd -d /proc -g rtkit -s /bin/false -u 115 rtkit' returned error code 1. Exiting.
dpkg: error processing rtkit (--configure):
subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of ssh:
ssh depends on openssh-server; however:
  Package openssh-server is not configured yet.
dpkg: error processing ssh (--configure):
dependency problems - leaving unconfigured
Setting up zemberek-server (0.7.1-12) ...
No apport report written because MaxReports is reached already
                                                              useradd: cannot lock /etc/passwd; try again later.
adduser: `/usr/sbin/useradd -d /tmp -g zemberek -s /bin/false -u 115 zemberek' returned error code 1. Exiting.
dpkg: error processing zemberek-server (--configure):
subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of zpspell:
zpspell depends on zemberek-server; however:
  Package zemberek-server is not configured yet.
dpkg: error processing zpspell (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              Errors were encountered while processing:
usbmuxd
libimobiledevice0
gvfs-backends
libgpod4
libgpod-common
openssh-server
rtkit
ssh
zemberek-server
zpspell
E: Sub-process /usr/bin/dpkg returned an error code (1)


[eribol]

Kod Seç Genişlet

sudo dpkg --confugire -a

[tirit]

Sağplasınız

Kod Seç Genişlet

sudo dpkg --confugire -a

Bunu da yaptım;fakat ne içindi Çıktısını istiyorsan aşağıda

Kod Seç Genişlet

efekan@efekan-laptop:~$ sudo dpkg --confugire -a
[sudo] password for efekan:
dpkg: unknown option --confugire

Type dpkg --help for help about installing and deinstalling packages [*];
Use `dselect' or `aptitude' for user-friendly package management;
Type dpkg -Dhelp for a list of dpkg debug flag values;
Type dpkg --force-help for a list of forcing options;
Type dpkg-deb --help for help about manipulating *.deb files;
Type dpkg --license for copyright license and lack of warranty (GNU GPL) [*].

Options marked [*] produce a lot of output - pipe it through `less' or `more' !

[eribol]

Yine yanlış yazmışım, pardon.

Kod Seç Genişlet

sudo dpkg --configure -atüm bozuk paketleri onarmaya yarıyor. Geçen yükseltme yaparken bellek yetersizliği deyip kritik hatadan dolayı yüklemeyi yarım bıraktı. Bu komut işi düzeltti. Belki sizde de düzelir.

[tirit]

Yine yanlış yazmışım, pardon.

Kod Seç Genişlet

sudo dpkg --configure -atüm bozuk paketleri onarmaya yarıyor. Geçen yükseltme yaparken bellek yetersizliği deyip kritik hatadan dolayı yüklemeyi yarım bıraktı. Bu komut işi düzeltti. Belki sizde de düzelir.

Kod Seç Genişlet

Errors were encountered while processing:
rtkit
openssh-server
zemberek-server
zpspell
usbmuxd
ssh
libimobiledevice0
libgpod-common
libgpod4
gvfs-backends

Gibi bir karşılık aldım

[eribol]

Şunu dener misiniz?

Kod Seç Genişlet

sudo apt-get purge gvfs-backends

[tirit]

Sistem bizimle dalga geçiyor heralde Gene aynı hataları veriyor

[crazyboy_xhan]

Arkadaşlar hepinize çok çok teşekkür ediyorum yeniden kurmak zorunda kaldım ubuntuyu yeniden kurdum düzeldi

çok sagolun ilgilendiginiz için hayırlı akşamlar

[sema]

@tirit;

Acaba bu paketleri tek tek elle kaldırmayı mı denesek Synaptic'ten, sonra yine kursak sorun çözülür mü? Ya da şu şekilde kaldırsak;

Kod Seç Genişlet

dpkg --purge --force-all <paket adı>

Sonra da;

Kod Seç Genişlet

sudo aptitude clean && sudo apt-get install -f && sudo dpkg --confugire -a && sudo aptitude dist-upgrade

Tümden uygulasak yeniden?

[heartsmagic]

@crazyboy_xhan, umarım sadece bu nedenden ötürü yeniden kurulum yapmamışsındır. Zira çözebileceğimiz durumlar olabiliyor, hatta çoğunlukla çözülüyor.
@tirit, senin sorunun da benzer olduğu için buradan devam edelim. Şimdi, öncelikle hata veren paketleri kaldırmayı deneyelim önce. Sistem bir kendine gelsin, ardından tekrar bakarız. Bunu da @sema'nın önerisi ile yapabilirsin. Ancak dikkat et, eğer purge işlemini, yani kaldırma işlemini yaparken de hata alırsan buraya geç. Zira o zaman işler değişebiliyor. Kaldırmaya da bence önce usbmuxd uygulamasından başla. Ne için kurmuştun bunu? Gerçi bende de kuruluymuş, hangi arada kurulduysa.

Not: @tirit ayrı bir başlık açtığından dolayı bu başlığı kapatıyorum.