Ubuntu 10.04 e yükselttim ama bilgisayarım açılmıyor...

[cengizun]

Arkadaşlar merhabalar...

9.04 üm vardı güzel güzel yaşıyordum nerden aklıma geldiyse 10.04 ü yükleyeyim dedim, şimdi ise makinam açılmıyor. Ubuntu yazısı ve 5 noktası kısa bir süre görünüyorlar sonra uzay sessizliği ile hareketsiz diskime uzun zamanlar bakıyorum. Bıkıyor ve makinenin enerjisini keserek tekrar başlatıyorum bu sefer açılıştaki seçeneklerden üstten üçüncüyü seçince (sanırım güvenli mod gibi bişey mi acaba) normal açılış süresinin iki katında açılıyor. Açılırkende başlangıç komutlarını ve güvenli moddaymış gibi yaptığı işlemleri teker teker yaparak açılıyor...

Ne yapacağım. Bilen veya benzer sorunu yaşayan var mı?

Şimdiden sağ olun...

[sema]

Merhaba;

Yükselttiğinize ve henüz hiç açmadığınıza göre önceki kernel'lar duruyordur, onlarla da mı açılmıyor? Açılışta önceki kernel'ı seçseniz?[

Not: Yükleyeyimi yükselteyim diye okudum, evet bu sorunu yaşayan çok kişi var, yükleme sırasında Grub satırında E'ye basarak kernel satırının sonundaki splash ve quiet parametrelerini silerseniz işe yarayabilir./s]

[cengizun]

Açtım açtım. İşte bahsettiğim gibi oldu üstten üçüncü dediğim 10.04 kernel bişey bişey di, ve onu seçerek açtım. Şu anda da 10.04 ten netteyim ama bir çok sefer denedim, makinam normal açılmıyor...

[bytan]

Üstten 3.yü anlayamadım. Neden yavaş açıldığını anlamaya çalışabiliriz. Dmesg çıktısı bize en azından açılış sırasında tıkanan yerlerle ilgili bilgiler verebilir:

Kod Seç Genişlet

dmesg | tail
dmesg

[sema]

Üstten 3.yü anlayamadım.

Açılış ekranındaki seçenekler, recovery mode var hani onlardan birinde Anladın sanırım...

[cengizun]

Yükleme sırasında gurup sırasına nasıl "e" ye basılır.

Üstten üçüncü dediğim şu. Makina da windows da var. Açılırken soruyor ya hangisi ile açılmak istiyorsun diye. ordaki seçeneklerden en üstteki normal açılması için bir alttakinde sanırım recovery yazıyor işte onun altındaki.

Dmesg çıktısını almak için uç birime mi yazacağım.

[sema]

Dmesg çıktısını almak için uç birime mi yazacağım.

Evet uçbirime yazmanız gerekiyor..

[cengizun]

Dmesg yazınca o kadar çok satır oluştu ki bana hiç bişey ifade etmiyo bunlar size nasıl aktarayım bu raporu?

[sema]

Kod çıktıları içinde verebilirsiniz, Mesajınızı yazdıktan sonra önizleme yaparak, yazdığınız mesajı seçtikten sonra diyez (#) işaretine tıklayabilirsiniz.

[cengizun]

Ben özür dilerim anlamadım.

Uç birimdekileri kopyala yapıştır yapayım mı?

[sema]

Evet evet, kopyala yapıştır yapacaksınız.

[bytan]

Aynen kopyalayıp yapıştırın. Tail ile dmesg kullanmak istememizinde sebeplerinden birisi bu. Çıktı çok uzun. Ancak bazen tail'e de yakalanmıyor bazı şeyler.

[cengizun]

Kod Seç Genişlet

input/input2
[    0.432727] ACPI: Sleep Button [SLPB]
[    0.434704] Marking TSC unstable due to TSC halts in idle
[    0.434726] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.434759] processor LNXCPU:00: registered as cooling_device0
[    0.434764] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.436028] Switched to high resolution mode on CPU 0
[    0.440499] thermal LNXTHERM:01: registered as thermal_zone0
[    0.440510] ACPI: Thermal Zone [THM0] (53 C)
[    0.440565] isapnp: Scanning for PnP cards...
[    0.793679] isapnp: No Plug & Play device found
[    0.795069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.796097] serial 00:0a: activated
[    0.796207] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[    0.796698] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.796704] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.796712] serial 0000:00:1f.6: PCI INT B disabled
[    0.797896] brd: module loaded
[    0.798474] loop: module loaded
[    0.798565] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.798697] ata_piix 0000:00:1f.1: version 2.13
[    0.798707] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.799082] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.799088] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    0.799132] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.799217] scsi0 : ata_piix
[    0.799345] scsi1 : ata_piix
[    0.800438] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.800442] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.801481] Fixed MDIO Bus: probed
[    0.801527] PPP generic driver version 2.4.2
[    0.801642] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.829342] ACPI: Battery Slot [BAT0] (battery present)
[    0.833188] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[    0.833563] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    0.833568] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    0.833582] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.833587] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.833626] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.837537] ehci_hcd 0000:00:1d.7: debug port 1
[    0.837544] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.837553] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
[    0.852036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.852125] usb usb1: configuration #1 chosen from 1 choice
[    0.852162] hub 1-0:1.0: USB hub found
[    0.852172] hub 1-0:1.0: 6 ports detected
[    0.852244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.852265] uhci_hcd: USB Universal Host Controller Interface driver
[    0.852632] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    0.852639] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[    0.852646] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.852651] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.852686] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.852708] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
[    0.852809] usb usb2: configuration #1 chosen from 1 choice
[    0.852846] hub 2-0:1.0: USB hub found
[    0.852855] hub 2-0:1.0: 2 ports detected
[    0.853454] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[    0.853824] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.853829] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    0.853836] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.853841] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.853882] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.853903] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[    0.853995] usb usb3: configuration #1 chosen from 1 choice
[    0.854032] hub 3-0:1.0: USB hub found
[    0.854041] hub 3-0:1.0: 2 ports detected
[    0.854086] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    0.854095] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.854099] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.854132] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.854153] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[    0.854252] usb usb4: configuration #1 chosen from 1 choice
[    0.854288] hub 4-0:1.0: USB hub found
[    0.854296] hub 4-0:1.0: 2 ports detected
[    0.854405] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.860806] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.860814] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.860881] mice: PS/2 mouse device common for all mice
[    0.860999] rtc_cmos 00:06: RTC can wake from S4
[    0.861037] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.861058] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    0.861184] device-mapper: uevent: version 1.0.3
[    0.861289] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.861376] device-mapper: multipath: version 1.1.0 loaded
[    0.861379] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.861519] EISA: Probing bus 0 at eisa.0
[    0.861525] Cannot allocate resource for EISA slot 1
[    0.861529] Cannot allocate resource for EISA slot 2
[    0.861531] Cannot allocate resource for EISA slot 3
[    0.861534] Cannot allocate resource for EISA slot 4
[    0.861537] Cannot allocate resource for EISA slot 5
[    0.861540] Cannot allocate resource for EISA slot 6
[    0.861543] Cannot allocate resource for EISA slot 7
[    0.861548] EISA: Detected 0 cards.
[    0.861649] cpuidle: using governor ladder
[    0.861736] cpuidle: using governor menu
[    0.862336] TCP cubic registered
[    0.862536] NET: Registered protocol family 10
[    0.863056] lo: Disabled Privacy Extensions
[    0.863432] NET: Registered protocol family 17
[    0.863454] Bluetooth: L2CAP ver 2.13
[    0.863456] Bluetooth: L2CAP socket layer initialized
[    0.863460] Bluetooth: SCO (Voice Link) ver 0.6
[    0.863462] Bluetooth: SCO socket layer initialized
[    0.863502] Bluetooth: RFCOMM TTY layer initialized
[    0.863506] Bluetooth: RFCOMM socket layer initialized
[    0.863508] Bluetooth: RFCOMM ver 1.11
[    0.863660] P-state transition latency capped at 20 uS
[    0.863953] Using IPI No-Shortcut mode
[    0.864042] PM: Resume from disk failed.
[    0.864057] registered taskstats version 1
[    0.864182]   Magic number: 10:931:702
[    0.864260] rtc_cmos 00:06: setting system clock to 2010-05-21 21:40:52 UTC (1274478052)
[    0.864264] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.864267] EDD information not available.
[    0.866026] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.964551] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, 1.04, max UDMA/33
[    0.965034] ata1.00: ATA-6: HTS548040M9AT00, MG2OA5DA, max UDMA/100
[    0.965038] ata1.00: 78140160 sectors, multi 16: LBA
[    0.980349] ata2.00: configured for UDMA/33
[    0.980744] ata1.00: configured for UDMA/100
[    0.980894] scsi 0:0:0:0: Direct-Access     ATA      HTS548040M9AT00  MG2O PQ: 0 ANSI: 5
[    0.981058] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.981105] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    0.981164] sd 0:0:0:0: [sda] Write Protect is off
[    0.981168] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.981199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.981354]  sda:
[    0.985807] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N 1.04 PQ: 0 ANSI: 5
[    0.996868] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    0.996872] Uniform CD-ROM driver Revision: 3.20
[    0.996974] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.997024] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.006199]  sda1 sda2 sda3 < sda5 sda6 >
[    1.052064] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.052083] Freeing unused kernel [s]memory[/s]: 544k freed
[    1.052470] Write protecting the kernel text: 4584k
[    1.052517] Write protecting the kernel read-only data: 1840k
[    1.199757] Floppy drive(s): fd0 is 1.44M
[    1.220165] FDC 0 is a National Semiconductor PC87306
[    1.271572] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.271577] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.272147] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[    1.272153] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[    1.295711] e100 0000:02:08.0: PME# disabled
[    1.305952] e100: eth0: e100_probe: addr 0xd0201000, irq 11, MAC addr 00:11:25:2c:7a:86
[    1.783377] EXT3-fs: INFO: recovery required on readonly filesystem.
[    1.783382] EXT3-fs: write access will be enabled during recovery.
[    1.939143] kjournald starting.  Commit interval 5 seconds
[    1.939156] EXT3-fs: recovery complete.
[    1.939837] EXT3-fs: mounted filesystem with ordered data mode.
[   51.065111] Adding 763048k swap on /dev/sda6.  Priority:-1 extents:1 across:763048k
[   51.184127] udev: starting version 151
[   51.212051] EXT3 FS on sda5, internal journal
[   51.254390] lp: driver loaded but no devices found
[   51.396357] irda_init()
[   51.396379] NET: Registered protocol family 23
[   51.434725] nsc-ircc 00:0c: activated
[   51.434733] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[   51.434899] nsc-ircc, chip->init
[   51.434908] nsc-ircc, Found chip at base=0x02e
[   51.434932] nsc-ircc, driver loaded (Dag Brattli)
[   51.435747] IrDA: Registered device irda0
[   51.435751] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[   51.441627] parport_pc 00:0b: reported by Plug and Play ACPI
[   51.441666] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[   51.444368] Non-volatile [s]memory[/s] driver v1.3
[   51.564795] lp0: using parport0 (interrupt-driven).
[   51.571985] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[   51.571989] thinkpad_acpi: http://ibm-acpi.sf.net/
[   51.571992] thinkpad_acpi: ThinkPad BIOS 1VET58WW (1.16 ), EC 1VHT26WW-1.02
[   51.571995] thinkpad_acpi: IBM ThinkPad R51, model 2887AVG
[   51.618866] Registered led device: tpacpi::thinklight
[   51.618923] Registered led device: tpacpi::power
[   51.618943] Registered led device: tpacpi::standby
[   51.660283] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   51.689750] intel_rng: FWH not detected
[   51.689867] thinkpad_acpi: brightness: will use unverified default: brightness_mode=3
[   51.689871] thinkpad_acpi: brightness: please report to ibm-acpi-devel@lists.sourceforge.net whether it works well or not on your ThinkPad
[   51.695311] input: ThinkPad Extra Buttons as /devices/virtual/input/input5
[   51.708446] Linux agpgart interface v0.103
[   51.711747] ppdev: user-space parallel port driver
[   51.742858] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
[   51.742878] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[   51.742882] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[   51.742888] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
[   51.744675] lib80211: common routines for IEEE802.11 drivers
[   51.744679] lib80211_crypt: registered algorithm 'NULL'
[   51.759061] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   51.759065] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   51.775543] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   51.775547] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   51.854422] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[   51.855060] agpgart-intel 0000:00:00.0: detected 8060K stolen [s]memory[/s]
[   51.856915] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[   51.861313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:04/input/input6
[   51.861351] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   51.937021] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   51.937087] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   51.976455] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0430, PCI irq 11
[   51.976490] yenta_cardbus 0000:02:00.0: Socket status: 30000007
[   51.976526] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[   51.976563] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x7fff: clean.
[   51.978078] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge [s]memory[/s] window: 0xd0200000 - 0xdfffffff
[   51.978116] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge [s]memory[/s] window: 0xf0000000 - 0xf7ffffff
[   51.980054] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[   51.980089] ipw2200 0000:02:02.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
[   51.980178] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   51.980257] ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw
[   52.067717] type=1505 audit(1274467303.699:2): operation="profile_load" pid=3026 name=/sbin/dhclient3
[   52.068554] type=1505 audit(1274467303.703:3): operation="profile_load" pid=3026 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   52.069018] type=1505 audit(1274467303.703:4): operation="profile_load" pid=3026 name=/usr/lib/connman/scripts/dhclient-script
[   52.379560] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[   52.420555] [drm] Initialized drm 1.1.0 20060810
[   52.590853] Synaptics `imleçsürer`, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[   52.590921] serio: Synaptics pass-through port at isa0060/serio1/input0
[   52.623446] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   52.624353] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   52.624824] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   52.625205] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   52.625737] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   52.631865] input: SynPS/2 Synaptics `imleçsürer` as /devices/platform/i8042/serio1/input/input7
[   52.642026] type=1505 audit(1274467304.275:5): operation="profile_load" pid=3108 name=/usr/share/gdm/guest-session/Xsession
[   52.646293] type=1505 audit(1274467304.279:6): operation="profile_replace" pid=3117 name=/sbin/dhclient3
[   52.647148] type=1505 audit(1274467304.279:7): operation="profile_replace" pid=3117 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   52.647628] type=1505 audit(1274467304.279:8): operation="profile_replace" pid=3117 name=/usr/lib/connman/scripts/dhclient-script
[   52.878802] intel8x0_measure_ac97_clock: measured 65966 usecs (3176 samples)
[   52.878855] intel8x0: clocking to 48000
[   52.882285] i915 0000:00:02.0: power state changed by ACPI to D0
[   52.882343] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[   52.882422] i915 0000:00:02.0: setting latency timer to 64
[   52.905609] type=1505 audit(1274467304.539:9): operation="profile_load" pid=3118 name=/usr/bin/evince
[   52.917866] i2c-adapter i2c-1: unable to read EDID block.
[   52.917918] i915 0000:00:02.0: LVDS-1: no EDID data
[   52.942724] type=1505 audit(1274467304.575:10): operation="profile_load" pid=3118 name=/usr/bin/evince-previewer
[   52.958975] type=1505 audit(1274467304.591:11): operation="profile_load" pid=3118 name=/usr/bin/evince-thumbnailer
[   53.311159] [drm] DAC-6: set mode 640x480 0
[   53.775996] i2c-adapter i2c-1: unable to read EDID block.
[   53.776068] i915 0000:00:02.0: LVDS-1: no EDID data
[   53.782134] [drm] fb0: inteldrmfb frame buffer device
[   53.782189] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   54.126479] [drm] LVDS-8: set mode 1024x768 d
[   54.172190] Console: switching to colour frame buffer device 128x48
[   55.134408] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   55.675341] IBM machine detected. Enabling interrupts during APM calls.
[   55.675419] apm: BIOS not found.
[   55.966789] [drm] DAC-6: set mode 640x480 0
[   55.969358] psmouse serio2: ID: 10 00 64
[   56.457130] [drm] DAC-6: set mode 640x480 0
[   56.882567] i2c-adapter i2c-1: unable to read EDID block.
[   56.882626] i915 0000:00:02.0: LVDS-1: no EDID data
[   59.110967] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   59.110972] vboxdrv: Successfully done.
[   59.110974] vboxdrv: Found 1 processor cores.
[   59.111117] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   59.111122] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[   59.331534] [drm] DAC-6: set mode 640x480 0
[   59.822385] [drm] DAC-6: set mode 640x480 0
[   60.247059] i2c-adapter i2c-1: unable to read EDID block.
[   60.247064] i915 0000:00:02.0: LVDS-1: no EDID data
[   60.318220] [drm] DAC-6: set mode 640x480 0
[   60.809373] [drm] DAC-6: set mode 640x480 0
[   61.253911] i2c-adapter i2c-1: unable to read EDID block.
[   61.253918] i915 0000:00:02.0: LVDS-1: no EDID data
[   62.416385] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   62.634526] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[   64.346628] [drm] DAC-6: set mode 640x480 0
[   64.837407] [drm] DAC-6: set mode 640x480 0
[   65.261792] i2c-adapter i2c-1: unable to read EDID block.
[   65.261797] i915 0000:00:02.0: LVDS-1: no EDID data
[   65.333636] [drm] DAC-6: set mode 640x480 0
[   65.824366] [drm] DAC-6: set mode 640x480 0
[   66.072017] eth1: no IPv6 routers present
[   66.248444] i2c-adapter i2c-1: unable to read EDID block.
[   66.248448] i915 0000:00:02.0: LVDS-1: no EDID data
[   66.320091] [drm] DAC-6: set mode 640x480 0
[   66.809812] [drm] DAC-6: set mode 640x480 0
[   67.234195] i2c-adapter i2c-1: unable to read EDID block.
[   67.234200] i915 0000:00:02.0: LVDS-1: no EDID data
[   70.561097] [drm] DAC-6: set mode 640x480 0
[   71.070542] [drm] DAC-6: set mode 640x480 0
[   71.519216] i2c-adapter i2c-1: unable to read EDID block.
[   71.519225] i915 0000:00:02.0: LVDS-1: no EDID data
[   72.644028] Clocksource tsc unstable (delta = -73049591 ns)
[   74.159595] [drm] DAC-6: set mode 640x480 0
[   74.651151] [drm] DAC-6: set mode 640x480 0
[   75.098326] i2c-adapter i2c-1: unable to read EDID block.
[   75.098334] i915 0000:00:02.0: LVDS-1: no EDID data
[   89.117778] end_request: I/O error, dev fd0, sector 0
[  100.485593] lib80211_crypt: registered algorithm 'TKIP'
[  102.213567] end_request: I/O error, dev fd0, sector 0
[  116.301749] end_request: I/O error, dev fd0, sector 0
[  129.363760] end_request: I/O error, dev fd0, sector 0
[  129.363775] __ratelimit: 12 callbacks suppressed
[  129.363784] Buffer I/O error on device fd0, logical block 0
[  142.429528] end_request: I/O error, dev fd0, sector 0
[  142.429538] Buffer I/O error on device fd0, logical block 0
[  155.515135] end_request: I/O error, dev fd0, sector 0
[  155.515153] Buffer I/O error on device fd0, logical block 0
[  168.590249] end_request: I/O error, dev fd0, sector 0
[  168.590265] Buffer I/O error on device fd0, logical block 0
[  181.633496] end_request: I/O error, dev fd0, sector 0
[  181.633513] Buffer I/O error on device fd0, logical block 0
[  194.595013] end_request: I/O error, dev fd0, sector 0
[  194.595030] Buffer I/O error on device fd0, logical block 0
[  207.558915] end_request: I/O error, dev fd0, sector 0
[  207.558933] Buffer I/O error on device fd0, logical block 0
[  220.535301] end_request: I/O error, dev fd0, sector 0
[  220.535315] Buffer I/O error on device fd0, logical block 0
[  233.535988] end_request: I/O error, dev fd0, sector 0
[  233.536006] Buffer I/O error on device fd0, logical block 0
[  246.556638] end_request: I/O error, dev fd0, sector 0
[  246.556656] Buffer I/O error on device fd0, logical block 0
[  259.604149] end_request: I/O error, dev fd0, sector 0
[  259.604164] Buffer I/O error on device fd0, logical block 0
[  272.648707] end_request: I/O error, dev fd0, sector 0
[  272.648725] Buffer I/O error on device fd0, logical block 0
[  285.689124] end_request: I/O error, dev fd0, sector 0
[  285.689135] Buffer I/O error on device fd0, logical block 0
[  298.737386] end_request: I/O error, dev fd0, sector 0
[  298.737404] Buffer I/O error on device fd0, logical block 0
[  311.782341] end_request: I/O error, dev fd0, sector 0
[  311.782360] Buffer I/O error on device fd0, logical block 0
[  324.841880] end_request: I/O error, dev fd0, sector 0
[  324.841899] Buffer I/O error on device fd0, logical block 0
[  337.918588] end_request: I/O error, dev fd0, sector 0
[  337.918605] Buffer I/O error on device fd0, logical block 0
[  350.991420] end_request: I/O error, dev fd0, sector 0
[  350.991437] Buffer I/O error on device fd0, logical block 0
[  364.067185] end_request: I/O error, dev fd0, sector 0
[  364.067201] Buffer I/O error on device fd0, logical block 0
[  377.151694] end_request: I/O error, dev fd0, sector 0
[  377.151710] Buffer I/O error on device fd0, logical block 0
[  390.228043] end_request: I/O error, dev fd0, sector 0
[  390.228058] Buffer I/O error on device fd0, logical block 0
[  403.304419] end_request: I/O error, dev fd0, sector 0
[  403.304435] Buffer I/O error on device fd0, logical block 0
[  416.384967] end_request: I/O error, dev fd0, sector 0
[  416.384983] Buffer I/O error on device fd0, logical block 0
[  429.484876] end_request: I/O error, dev fd0, sector 0
[  429.484892] Buffer I/O error on device fd0, logical block 0
[  442.573259] end_request: I/O error, dev fd0, sector 0
[  442.573275] Buffer I/O error on device fd0, logical block 0
[  455.662524] end_request: I/O error, dev fd0, sector 0
[  455.662542] Buffer I/O error on device fd0, logical block 0
[  468.770954] end_request: I/O error, dev fd0, sector 0
[  468.770971] Buffer I/O error on device fd0, logical block 0
[  481.846006] end_request: I/O error, dev fd0, sector 0
[  481.846024] Buffer I/O error on device fd0, logical block 0
[  494.952033] end_request: I/O error, dev fd0, sector 0
[  494.952044] Buffer I/O error on device fd0, logical block 0
[  508.026742] end_request: I/O error, dev fd0, sector 0
[  508.026759] Buffer I/O error on device fd0, logical block 0
[  521.090045] end_request: I/O error, dev fd0, sector 0
[  521.090063] Buffer I/O error on device fd0, logical block 0
[  534.154391] end_request: I/O error, dev fd0, sector 0
[  534.154408] Buffer I/O error on device fd0, logical block 0
[  547.217961] end_request: I/O error, dev fd0, sector 0
[  547.217979] Buffer I/O error on device fd0, logical block 0
[  560.293076] end_request: I/O error, dev fd0, sector 0
[  560.293092] Buffer I/O error on device fd0, logical block 0
[  573.358443] end_request: I/O error, dev fd0, sector 0
[  573.358460] Buffer I/O error on device fd0, logical block 0
[  586.425914] end_request: I/O error, dev fd0, sector 0
[  586.425930] Buffer I/O error on device fd0, logical block 0
[  599.494057] end_request: I/O error, dev fd0, sector 0
[  599.494075] Buffer I/O error on device fd0, logical block 0
[  612.558111] end_request: I/O error, dev fd0, sector 0
[  612.558129] Buffer I/O error on device fd0, logical block 0
[  625.630681] end_request: I/O error, dev fd0, sector 0
[  625.630697] Buffer I/O error on device fd0, logical block 0
[  638.698354] end_request: I/O error, dev fd0, sector 0
[  651.778359] end_request: I/O error, dev fd0, sector 0
[  664.842574] end_request: I/O error, dev fd0, sector 0
[  664.842592] Buffer I/O error on device fd0, logical block 0
[  677.906281] end_request: I/O error, dev fd0, sector 0
[  677.906298] Buffer I/O error on device fd0, logical block 0
[  690.970671] end_request: I/O error, dev fd0, sector 0
[  690.970689] Buffer I/O error on device fd0, logical block 0
[  704.034610] end_request: I/O error, dev fd0, sector 0
[  704.034622] Buffer I/O error on device fd0, logical block 0
[  717.098782] end_request: I/O error, dev fd0, sector 0
[  717.098793] Buffer I/O error on device fd0, logical block 0
[  730.169782] end_request: I/O error, dev fd0, sector 0
[  730.169799] Buffer I/O error on device fd0, logical block 0
[  743.233686] end_request: I/O error, dev fd0, sector 0
[  743.233704] Buffer I/O error on device fd0, logical block 0
[  756.306110] end_request: I/O error, dev fd0, sector 0
[  756.306127] Buffer I/O error on device fd0, logical block 0
[  769.370036] end_request: I/O error, dev fd0, sector 0
[  769.370054] Buffer I/O error on device fd0, logical block 0
[  782.434594] end_request: I/O error, dev fd0, sector 0
[  782.434605] Buffer I/O error on device fd0, logical block 0
[  795.497976] end_request: I/O error, dev fd0, sector 0
[  795.497994] Buffer I/O error on device fd0, logical block 0
[  808.570198] end_request: I/O error, dev fd0, sector 0
[  808.570214] Buffer I/O error on device fd0, logical block 0
[  821.634674] end_request: I/O error, dev fd0, sector 0
[  821.634690] Buffer I/O error on device fd0, logical block 0
[  834.702286] end_request: I/O error, dev fd0, sector 0
[  834.702303] Buffer I/O error on device fd0, logical block 0
[  847.769848] end_request: I/O error, dev fd0, sector 0
[  847.769864] Buffer I/O error on device fd0, logical block 0
[  860.844506] end_request: I/O error, dev fd0, sector 0
[  860.844523] Buffer I/O error on device fd0, logical block 0
[  873.905856] end_request: I/O error, dev fd0, sector 0
[  873.905873] Buffer I/O error on device fd0, logical block 0
[  886.982639] end_request: I/O error, dev fd0, sector 0
[  886.982656] Buffer I/O error on device fd0, logical block 0
[  900.050496] end_request: I/O error, dev fd0, sector 0
[  900.050514] Buffer I/O error on device fd0, logical block 0
[  913.117055] end_request: I/O error, dev fd0, sector 0
[  913.117073] Buffer I/O error on device fd0, logical block 0
[  926.181919] end_request: I/O error, dev fd0, sector 0
[  926.181935] Buffer I/O error on device fd0, logical block 0
[  939.246201] end_request: I/O error, dev fd0, sector 0
[  939.246218] Buffer I/O error on device fd0, logical block 0
[  952.310745] end_request: I/O error, dev fd0, sector 0
[  952.310761] Buffer I/O error on device fd0, logical block 0
[  965.374135] end_request: I/O error, dev fd0, sector 0
[  965.374152] Buffer I/O error on device fd0, logical block 0
[  978.438381] end_request: I/O error, dev fd0, sector 0
[  978.438397] Buffer I/O error on device fd0, logical block 0
[  991.502773] end_request: I/O error, dev fd0, sector 0
[  991.502790] Buffer I/O error on device fd0, logical block 0
[ 1004.566197] end_request: I/O error, dev fd0, sector 0
[ 1004.566215] Buffer I/O error on device fd0, logical block 0
[ 1017.630643] end_request: I/O error, dev fd0, sector 0
[ 1017.630660] Buffer I/O error on device fd0, logical block 0
[ 1030.693898] end_request: I/O error, dev fd0, sector 0
[ 1030.693915] Buffer I/O error on device fd0, logical block 0
[ 1043.758199] end_request: I/O error, dev fd0, sector 0
[ 1043.758216] Buffer I/O error on device fd0, logical block 0
[ 1056.822597] end_request: I/O error, dev fd0, sector 0
[ 1056.822613] Buffer I/O error on device fd0, logical block 0
[ 1069.885909] end_request: I/O error, dev fd0, sector 0
[ 1069.885925] Buffer I/O error on device fd0, logical block 0
[ 1082.950328] end_request: I/O error, dev fd0, sector 0
[ 1082.950345] Buffer I/O error on device fd0, logical block 0
[ 1096.014678] end_request: I/O error, dev fd0, sector 0
[ 1096.014694] Buffer I/O error on device fd0, logical block 0
[ 1109.078024] end_request: I/O error, dev fd0, sector 0
[ 1109.078040] Buffer I/O error on device fd0, logical block 0
[ 1122.142532] end_request: I/O error, dev fd0, sector 0
[ 1122.142548] Buffer I/O error on device fd0, logical block 0
[ 1135.224903] end_request: I/O error, dev fd0, sector 0
[ 1135.224921] Buffer I/O error on device fd0, logical block 0
[ 1148.289974] end_request: I/O error, dev fd0, sector 0
[ 1148.289992] Buffer I/O error on device fd0, logical block 0
[ 1161.377741] end_request: I/O error, dev fd0, sector 0
[ 1161.377758] Buffer I/O error on device fd0, logical block 0
[ 1174.458524] end_request: I/O error, dev fd0, sector 0
cengiz@cengiz-laptop:~$


[bytan]

İlk gözüme çarpan fd0 oldu. Bios ayarlarından varsa disket sürücüyü etkisiz hale getirmeniz faydalı olur.

[cengizun]

hemen deneyeceğim...


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 21 Mayıs 2010 - 22:56:49
Denedim; Hüsran 

Bu arada 3. satırda 10.04 kernel 2.6.31.21. yazıyor...

[sema]

Bir de şurada söylenenleri dener misiniz?

http://forum.ubuntu-tr.net/index.php?topic=19220.0

[bytan]

hemen deneyeceğim...


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 21 Mayıs 2010 - 22:56:49
Denedim; Hüsran 

Bu arada 3. satırda 10.04 kernel 2.6.31.21. yazıyor...

Biraz önce kritik yapıp 3. satırı tahmin etmeye çalışmıştık. Bir şekilde yeni kernel sisteminizde sorun yaratıyor. Bir önceki yöntemin etki edip etmediğini yine dmesg çıktısına bakarak anlayabiliriz. Fd hata mesajları bitti mi bitmedi mi ya da geriye kalanlar hangileri vs.

[cengizun]

Sanırım ben bu problemi çözecek kadar zamana sahip değilim.

Makinamı 9.10 a nasıl indirebilirim. O dağıtımda sorun yoktu...

[bytan]

2.6.31-21 ile 10.04 kullanmaya devam edebilirsiniz. Her ne sebeptense sadece son kernelde bu sorun oluşmuyor mu? Yoksa bu kernelde mi sorunlu?

[cengizun]

Hayır sorunlu değil. Otomatik olarak bu kerneli seçmeyi başarırsam bence sorun yok...

[sema]

O hâlde son kernel'ı bilgisayarınızdan kaldırırsanız sorun olmaz. Nasıl yapacaksınız?

Yönetim >> Synaptic Paket Yöneticisi'ni açın ve üstteki arama kutusuna, kernel 2.6.32 yazıp son kernel'ı kaldırabilirsiniz. Kernel'a sağ tıklayıp, kaldırmak için tıklatını işaretleyip uygula diyeceksiniz.

Yalnız güncelleme yaparsanız ki yaparsınız, son kernel yine yüklenir sanırım, bunu onaylamamanız gerekir ya da başka bir yolu var mı kernel güncellememesinin bilmiyorum.

[cengizun]

Önerdiğini denedim, olmadı. Bu arada bahsettiğin linktekiler de işe yaramadı.

Başka önerisi olan varsa denemek istiyorum biraz daha kasacağım olmadı eski sürüme marş marş...



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Mayıs 2010 - 15:30:08
bir şey buldum.

ubuntu 9.04 ü yükseltmeden önce kurulum cd si hazirlamiştim cd den yüklemeyi düşünüyordum cd yi yüklemek için taktiğimda ayni şu an yaptiği hatayi yapmişti.

bu neyi gösteriyor acaba... ?

yani sanirim paketlerin yüklenip kurulmasi esnasinda bir sorun olmadi galiba. şimdi hatirladim ki bu daha önceden de olmuştu.

[heartsmagic]

Bir önceki kernele açılıyor mu sistem?
Sistem şu an güncel mi?

[cengizun]

Bir önceki kernel dediğiniz benim üstten 3. dediğim şey sanırım. Evet 10.04 açılıyor sanırım bir önceki kernel ile.

Sistemim güncel...

[heartsmagic]

Açıkçası aklıma eski kernelle bir süre yola devam etmek ve yeni kernel güncellemesinde sorun çözülüyor mu iye bakmaktan başka bir şey gelmiyor. Bu açılan kernelle herhangi bir sorunun var mı?