[Çözüldü] bilgisayar webcami algılamıyor

[tirit]

Selamlar
bilgisayar webcami algılamıyor. 'emesene', 'amsn' programlarında falan görüntüm karşıya gitmiyor. Kamera için fotoğraf çekme programı kurdum onu da açmadı. Ne yapmalıyım?
Teşekkürler

[zeitgeist]

Kameran çalışıyor muydu, örneğin Chesee ile görüntü alabiliyor muydun?

[barış]

Kamera çalışıyormuydu da böyle oluyor? Yoksa hiç bir çalışma belirtisi yok mu? Ayrıca kamera marka ve modeliniz nedir?

[tirit]

Ubuntu kurduğumdan beri hiç çalışmadı. Demin cheese'i de denedim bir sonuç alamadım maalesef. Kamera notebook'a bağlı. Notebook: Asus F8Vr

[eribol]

Kod Seç Genişlet

lsusbve

Kod Seç Genişlet

lspciçıktısını aktarır mısınız?

[tirit]

Kod Seç Genişlet

lsusb
çıktısı

Kod Seç Genişlet

Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 005 Device 002: ID 0b05:1751 ASUSTek Computer, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 174f:5a31 Syntek Sonix USB 2.0 Camera
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Kod Seç Genişlet

lspci
çıktısı:

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
01:00.1 Audio device: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series]
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:03.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
07:03.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:03.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)


[eribol]

http://www.ideasonboard.org/uvc/ bu sayfada belirtildiğine göre çalışıyor olması lazım.

Kod Seç Genişlet

lsmodçıktısını alabilir miyiz?

[tirit]

peki

Kod Seç Genişlet

Module                  Size  Used by
binfmt_misc             6587  1
rfcomm                 33421  4
ppdev                   5259  0
sco                     7885  2
bridge                 45582  0
stp                     1655  1 bridge
bnep                    9436  2
l2cap                  30624  16 rfcomm,bnep
joydev                  8708  0
snd_hda_codec_atihdmi     2367  1
snd_hda_codec_realtek   203168  1
uvcvideo               56990  0
videodev               34361  1 uvcvideo
snd_seq_dummy           1338  0
snd_seq_oss            26726  0
snd_seq_midi            4557  0
snd_hda_intel          21877  2
snd_hda_codec          74201  3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
arc4                    1153  2
snd_hwdep               5412  1 snd_hda_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70662  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
v4l1_compat            13251  2 uvcvideo,videodev
iwlagn                105566  0
snd_rawmidi            19056  1 snd_seq_midi
iwlcore               105922  1 iwlagn
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
fbcon                  35102  71
tileblit                2031  1 fbcon
ricoh_mmc               2923  0
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
mac80211              204922  2 iwlagn,iwlcore
btusb                  10925  2
snd                    54148  16 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
sdhci_pci               5470  0
sdhci                  15462  1 sdhci_pci
video                  17375  0
output                  1871  1 video
fglrx                2092908  29
bluetooth              49892  9 rfcomm,sco,bnep,l2cap,btusb
intel_agp              24177  0
psmouse                63245  0
serio_raw               3978  0
cfg80211              126485  3 iwlagn,iwlcore,mac80211
soundcore               6620  1 snd
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
vga16fb                11385  1
vgastate                8961  1 vga16fb
agpgart                31724  2 fglrx,intel_agp
asus_laptop            17008  0
led_class               2864  3 iwlcore,sdhci,asus_laptop
lp                      7028  0
parport                32635  2 ppdev,lp
hid_a4tech              1910  0
usbhid                 36110  0
hid                    67032  2 hid_a4tech,usbhid
ohci1394               26950  0
ieee1394               81181  1 ohci1394
r8169                  33884  0
mii                     4381  1 r8169
ahci                   32008  2


[tirit]

Selamlar;
Laptop'ımın kamerasıyla ilgili sıkıntım var. Bilgisayar kamerayı aygıt olarak algılamıyor veya ben uygun sürücüyü ya da herhangi bir yazılımı kullanmadım. Nasıl halledebilirim?
Teşekkürler


Not.
d.evice = aygıt
d.river = sürücü

[garafatma]

cheese uygulaması ile denediniz mi?

Ayrıca bir lspci ve lsusb çıktısı alabilirmiyiz?

[sem]

Konu dışı: Sanırım konunun donanım bölümüne açılması daha uygun olacaktı...   Kolay gelsin...

[tirit]

Türkçe kullanımı ve konunun yanlış yerde açılması için özür dilerim.

[heartsmagic]

cheese uygulaması ile denediniz mi?

Ayrıca bir lspci ve lsusb çıktısı alabilirmiyiz?

[tirit]

cheese uygulaması ile denediniz mi?

Ayrıca bir lspci ve lsusb çıktısı alabilirmiyiz?

Cheese'i denedim olmuyor maalesef

lspci çıktısı:

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
01:00.1 Audio device: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series]
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:03.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
07:03.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:03.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)


lsusb çıktısı

Kod Seç Genişlet

Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 005 Device 002: ID 0b05:1751 ASUSTek Computer, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 174f:5a31 Syntek Sonix USB 2.0 Camera
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


[heartsmagic]

@tirit, daha önce açtığın bir başlık varsa lütfen oradan devam et sorularına. Konuları birleştiriyorum.
Biraz bakınıp eğer yardımcı olabileceğimiz bir şey varsa yazmaya çalışırız.

[tirit]

@tirit, daha önce açtığın bir başlık varsa lütfen oradan devam et sorularına. Konuları birleştiriyorum.
Biraz bakınıp eğer yardımcı olabileceğimiz bir şey varsa yazmaya çalışırız.

aslında açtığım başlıkları saklıyorum fakat bu başlığı kaydetmemişim. Google aramasında da bulamadım. Bu sebeple başlığı tekrar açmak durumunda kaldım.

[heartsmagic]

Gerçi uvc artık dağıtımla beraber geliyor diye biliyorum, pek de ümidim yok ama deneyelim:

Kod Seç Genişlet

sudo aptitude install subversion
svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk
cd trunk
make
sudo make install

Ancak bundan önce şunu yap:

Kod Seç Genişlet

sudo gedit /etc/modprobe.d/blacklist.conf
Açılan dosyada en alt satıra şunu ekle:

uvcvideo

Ardından sistemi yeniden başlat ve bir üstte anlattığımı yap. Sonra kamerayı tak ve şu çıktıları aktar bize:

Kod Seç Genişlet

dmesg
lsmod | grep uvc
luvcview -L
luvcview -w -s 960x720

Not: Kendi başlıklarına profilin üzerinden erişebilirsin. Ayrıca son zamanda etkinleştirdiğimi Favori eklentimiz de iş görebilir.

[tirit]

çıktılar:

Kod Seç Genişlet

[    0.275580] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.275585] pci 0000:00:1c.2: setting latency timer to 64
[    0.275596] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.275601] pci 0000:00:1c.5: setting latency timer to 64
[    0.275609] pci 0000:00:1e.0: setting latency timer to 64
[    0.275613] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.275616] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.275618] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.275620] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[    0.275622] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.275624] pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
[    0.275627] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff]
[    0.275629] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff]
[    0.275631] pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfdffffff]
[    0.275633] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    0.275636] pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe9fffff]
[    0.275638] pci_bus 0000:04: resource 2 pref mem [0xfa000000-0xfcefffff]
[    0.275640] pci_bus 0000:06: resource 0 io:  [0xe000-0xefff]
[    0.275642] pci_bus 0000:06: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.275644] pci_bus 0000:06: resource 2 pref mem [0xfcf00000-0xfcffffff]
[    0.275646] pci_bus 0000:07: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.275648] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.275650] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
[    0.275685] NET: Registered protocol family 2
[    0.275771] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.276048] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.276479] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.276672] TCP: Hash tables configured (established 131072 bind 65536)
[    0.276674] TCP reno registered
[    0.276743] NET: Registered protocol family 1
[    0.276892] pci 0000:01:00.0: Boot video device
[    0.276920] Simple Boot Flag at 0x51 set to 0x1
[    0.277068] cpufreq-nforce2: No nForce2 chipset.
[    0.277090] Scanning for low memory corruption every 60 seconds
[    0.277175] audit: initializing netlink socket (disabled)
[    0.277183] type=2000 audit(1276037686.275:1): initialized
[    0.285590] highmem bounce pool size: 64 pages
[    0.285594] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.286884] VFS: Disk quotas dquot_6.5.2
[    0.286932] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.287411] fuse init (API version 7.13)
[    0.287494] msgmni has been set to 1664
[    0.287672] alg: No test for stdrng (krng)
[    0.287716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.287719] io scheduler noop registered
[    0.287720] io scheduler anticipatory registered
[    0.287722] io scheduler deadline registered
[    0.287756] io scheduler cfq registered (default)
[    0.287884]   alloc irq_desc for 24 on node -1
[    0.287886]   alloc kstat_irqs on node -1
[    0.287893] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.287899] pcieport 0000:00:01.0: setting latency timer to 64
[    0.288021]   alloc irq_desc for 25 on node -1
[    0.288022]   alloc kstat_irqs on node -1
[    0.288031] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.288042] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.288189]   alloc irq_desc for 26 on node -1
[    0.288191]   alloc kstat_irqs on node -1
[    0.288199] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.288210] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.288352]   alloc irq_desc for 27 on node -1
[    0.288353]   alloc kstat_irqs on node -1
[    0.288362] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.288373] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.288524]   alloc irq_desc for 28 on node -1
[    0.288526]   alloc kstat_irqs on node -1
[    0.288534] pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
[    0.288545] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.288632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.288914] pciehp: Using ACPI for slot detection.
[    0.289001] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0
[    0.289045] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    0.289052] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.289172] ACPI: AC Adapter [AC0] (on-line)
[    0.289238] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.289247] ACPI: Sleep Button [SLPB]
[    0.289283] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.290556] ACPI: Lid Switch [LID]
[    0.290596] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.290598] ACPI: Power Button [PWRF]
[    0.291336] ACPI: SSDT bff96bc0 00248 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.291939] ACPI: SSDT bff96ea0 00765 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.292656] Monitor-Mwait will be used to enter C-1 state
[    0.292680] Monitor-Mwait will be used to enter C-3 state
[    0.292691] Marking TSC unstable due to TSC halts in idle
[    0.292734] processor LNXCPU:00: registered as cooling_device0
[    0.293074] ACPI: SSDT bff96af0 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.293468] ACPI: SSDT bff96e10 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.293843] Switching to clocksource hpet
[    0.295880] processor LNXCPU:01: registered as cooling_device1
[    0.303750] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
[    0.303757] ACPI: Expecting a [Reference] package element, found type C
[    0.303759] ACPI: Invalid passive threshold
[    0.304212] thermal LNXTHERM:01: registered as thermal_zone0
[    0.304222] ACPI: Thermal Zone [THRM] (59 C)
[    0.305497] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.306724] brd: module loaded
[    0.307115] loop: module loaded
[    0.307181] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.307526] Fixed MDIO Bus: probed
[    0.307554] PPP generic driver version 2.4.2
[    0.307587] tun: Universal TUN/TAP device driver, 1.6
[    0.307588] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.307651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.307672] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.307683] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.307686] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.307715] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.307741] ehci_hcd 0000:00:1a.7: debug port 1
[    0.311629] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.311643] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfddffc00
[    0.315776] isapnp: Scanning for PnP cards...
[    0.347034] Freeing initrd memory: 7771k freed
[    0.365067] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.365252] usb usb1: configuration #1 chosen from 1 choice
[    0.365277] hub 1-0:1.0: USB hub found
[    0.365288] hub 1-0:1.0: 6 ports detected
[    0.365364]   alloc irq_desc for 23 on node -1
[    0.365366]   alloc kstat_irqs on node -1
[    0.365372] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.365393] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.365396] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.365463] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.365543] ehci_hcd 0000:00:1d.7: debug port 1
[    0.369433] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.369450] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfddff800
[    0.388053] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.388169] usb usb2: configuration #1 chosen from 1 choice
[    0.388191] hub 2-0:1.0: USB hub found
[    0.388198] hub 2-0:1.0: 6 ports detected
[    0.388311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.388327] uhci_hcd: USB Universal Host Controller Interface driver
[    0.388420] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.388427] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.388431] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.388458] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.388497] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[    0.388626] usb usb3: configuration #1 chosen from 1 choice
[    0.388699] hub 3-0:1.0: USB hub found
[    0.388706] hub 3-0:1.0: 2 ports detected
[    0.388754]   alloc irq_desc for 21 on node -1
[    0.388756]   alloc kstat_irqs on node -1
[    0.388760] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.388768] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.388773] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.388852] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.388889] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.389001] usb usb4: configuration #1 chosen from 1 choice
[    0.389022] hub 4-0:1.0: USB hub found
[    0.389029] hub 4-0:1.0: 2 ports detected
[    0.389320]   alloc irq_desc for 19 on node -1
[    0.389321]   alloc kstat_irqs on node -1
[    0.389325] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.389333] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.389336] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.389362] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.389393] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[    0.389519] usb usb5: configuration #1 chosen from 1 choice
[    0.389540] hub 5-0:1.0: USB hub found
[    0.389546] hub 5-0:1.0: 2 ports detected
[    0.389638] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.389644] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.389647] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.389672] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.389708] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[    0.389836] usb usb6: configuration #1 chosen from 1 choice
[    0.389977] hub 6-0:1.0: USB hub found
[    0.389983] hub 6-0:1.0: 2 ports detected
[    0.390023] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.390028] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.390031] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.390059] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.390083] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.390157] usb usb7: configuration #1 chosen from 1 choice
[    0.390180] hub 7-0:1.0: USB hub found
[    0.390186] hub 7-0:1.0: 2 ports detected
[    0.390223] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.390229] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.390232] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.390262] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.390285] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[    0.390356] usb usb8: configuration #1 chosen from 1 choice
[    0.390379] hub 8-0:1.0: USB hub found
[    0.390385] hub 8-0:1.0: 2 ports detected
[    0.390476] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.394002] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.398354] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.398359] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.398383] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.398401] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.398419] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.398623] mice: PS/2 mouse device common for all mice
[    0.398753] rtc_cmos 00:03: RTC can wake from S4
[    0.398788] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.398816] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.398904] device-mapper: uevent: version 1.0.3
[    0.399046] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.399149] device-mapper: multipath: version 1.1.0 loaded
[    0.399152] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.399296] EISA: Probing bus 0 at eisa.0
[    0.399303] Cannot allocate resource for EISA slot 1
[    0.399435] EISA: Detected 0 cards.
[    0.399546] cpuidle: using governor ladder
[    0.399621] cpuidle: using governor menu
[    0.399993] TCP cubic registered
[    0.400135] NET: Registered protocol family 10
[    0.400529] lo: Disabled Privacy Extensions
[    0.400811] NET: Registered protocol family 17
[    0.401376] Using IPI No-Shortcut mode
[    0.401434] PM: Resume from disk failed.
[    0.401446] registered taskstats version 1
[    0.402036]   Magic number: 14:824:956
[    0.402109] rtc_cmos 00:03: setting system clock to 2010-06-08 22:54:46 UTC (1276037686)
[    0.402112] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.402113] EDD information not available.
[    0.412820] ACPI: Battery Slot [BAT0] (battery present)
[    0.437330] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.671059] isapnp: No Plug & Play device found
[    0.671071] Freeing unused kernel memory: 656k freed
[    0.671407] Write protecting the kernel text: 4676k
[    0.671454] Write protecting the kernel read-only data: 1840k
[    0.685205] udev: starting version 151
[    0.749347] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.749370] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.749416] r8169 0000:06:00.0: setting latency timer to 64
[    0.749473]   alloc irq_desc for 29 on node -1
[    0.749474]   alloc kstat_irqs on node -1
[    0.749490] r8169 0000:06:00.0: irq 29 for MSI/MSI-X
[    0.750047] eth0: RTL8168c/8111c at 0xf805e000, 00:22:15:8e:7c:df, XID 1c4000c0 IRQ 29
[    0.775725] ahci 0000:00:1f.2: version 3.0
[    0.775744] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.775790]   alloc irq_desc for 30 on node -1
[    0.775792]   alloc kstat_irqs on node -1
[    0.775802] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[    0.775854] ahci: SSS flag set, parallel bus scan disabled
[    0.775888] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[    0.775891] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[    0.775897] ahci 0000:00:1f.2: setting latency timer to 64
[    0.793922] scsi0 : ahci
[    0.794033] scsi1 : ahci
[    0.794085] scsi2 : ahci
[    0.794135] scsi3 : ahci
[    0.794188] scsi4 : ahci
[    0.794238] scsi5 : ahci
[    0.794540] ata1: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff100 irq 30
[    0.794543] ata2: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff180 irq 30
[    0.794545] ata3: DUMMY
[    0.794547] ata4: DUMMY
[    0.794548] ata5: DUMMY
[    0.794551] ata6: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff380 irq 30
[    0.796391] ohci1394 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.854132] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.108114] usb 2-5: new high speed USB device using ehci_hcd and address 3
[    1.112046] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.113327] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.113549] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.113552] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.114712] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
[    1.114714] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.116198] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.116406] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.116409] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.117572] ata1.00: configured for UDMA/133
[    1.132135] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[    1.132265] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.132299] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.132356] sd 0:0:0:0: [sda] Write Protect is off
[    1.132359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.132379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.132491]  sda: sda1 sda2 < sda5 >
[    1.186161] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.232115] usb 2-5: device descriptor read/64, error -71
[    1.460113] usb 2-5: device descriptor read/64, error -71
[    1.676101] usb 2-5: new high speed USB device using ehci_hcd and address 4
[    1.800112] usb 2-5: device descriptor read/64, error -71
[    1.858175] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.863077] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.863080] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.868176] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR04, max UDMA/133, ATAPI AN
[    1.873635] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.873638] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.878756] ata2.00: configured for UDMA/133
[    2.003221] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RR04 PQ: 0 ANSI: 5
[    2.028062] usb 2-5: device descriptor read/64, error -71
[    2.128134] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c000164b916]
[    2.244057] usb 2-5: new high speed USB device using ehci_hcd and address 5
[    2.330541] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.330543] Uniform CD-ROM driver Revision: 3.20
[    2.330606] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.330645] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.648109] ata6: SATA link down (SStatus 0 SControl 300)
[    2.660111] usb 2-5: device not accepting address 5, error -71
[    2.772055] usb 2-5: new high speed USB device using ehci_hcd and address 6
[    2.957599] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.188056] usb 2-5: device not accepting address 6, error -71
[    3.188071] hub 2-0:1.0: unable to enumerate USB device on port 5
[    3.452049] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    3.620536] usb 5-1: configuration #1 chosen from 1 choice
[    3.860048] usb 5-2: new full speed USB device using uhci_hcd and address 3
[    4.025517] usb 5-2: configuration #1 chosen from 1 choice
[    4.264029] usb 6-1: new low speed USB device using uhci_hcd and address 2
[    4.437889] usb 6-1: configuration #1 chosen from 1 choice
[    4.688024] usb 8-1: new full speed USB device using uhci_hcd and address 2
[    4.837113] usb 8-1: not running at top speed; connect to a high speed hub
[    4.855134] usb 8-1: unable to read config index 0 descriptor/all
[    4.855137] usb 8-1: can't read configurations, error -75
[    4.968035] usb 8-1: new full speed USB device using uhci_hcd and address 3
[    5.120097] usb 8-1: not running at top speed; connect to a high speed hub
[    5.130132] usb 8-1: unable to read config index 0 descriptor/start: -75
[    5.130135] usb 8-1: chopping to 0 config(s)
[    5.139132] usb 8-1: string descriptor 0 read error: -75
[    5.139213] usb 8-1: no configuration chosen from 0 choices
[   20.878529] udev: starting version 151
[   20.915821] lp: driver loaded but no devices found
[   20.996175] vga16fb: initializing
[   20.996179] vga16fb: mapped to 0xc00a0000
[   20.996226] fb0: VGA16 VGA frame buffer device
[   21.006140] Linux agpgart interface v0.103
[   21.011857] type=1505 audit(1276037707.106:2):  operation="profile_load" pid=490 name="/sbin/dhclient3"
[   21.012490] type=1505 audit(1276037707.106:3):  operation="profile_load" pid=490 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   21.012795] type=1505 audit(1276037707.106:4):  operation="profile_load" pid=490 name="/usr/lib/connman/scripts/dhclient-script"
[   21.018049] Adding 9068652k swap on /dev/sda5.  Priority:-1 extents:1 across:9068652k
[   21.124966] asus_laptop: Asus Laptop Support version 0.42
[   21.132361] cfg80211: Calling CRDA to update world regulatory domain
[   21.134292] sdhci: Secure Digital Host Controller Interface driver
[   21.134295] sdhci: Copyright(c) Pierre Ossman
[   21.134500] asus_laptop:   F8Vr model detected
[   21.137923] input: Asus Laptop extra buttons as /devices/virtual/input/input5
[   21.138363] Registered led device: asus::touchpad
[   21.141459] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[   21.141940] Bluetooth: Core ver 2.15
[   21.143993] NET: Registered protocol family 31
[   21.143995] Bluetooth: HCI device and connection manager initialized
[   21.143998] Bluetooth: HCI socket layer initialized
[   21.146571] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   21.146667] usbcore: registered new interface driver btusb
[   21.154103] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   21.154107] Disabling lock debugging due to kernel taint
[   21.163138] cfg80211: World regulatory domain updated:
[   21.163141] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   21.163144] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.163146] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.163148] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.163151] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.163153] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.248447] acpi device:1b: registered as cooling_device2
[   21.248576] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/LNXVIDEO:00/input/input6
[   21.248620] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   21.254396] [fglrx] Maximum main memory to use for locked dma buffers: 2877 MBytes.
[   21.254701] [fglrx]   vendor: 1002 device: 95c4 count: 1
[   21.260770] [fglrx] ioport: bar 1, base 0xc000, size: 0x100
[   21.260787] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.260793] pci 0000:01:00.0: setting latency timer to 64
[   21.260978] [fglrx] Kernel PAT support is enabled
[   21.260997] [fglrx] module loaded - fglrx 8.72.11 [Apr  8 2010] with 1 minors
[   21.302143] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[   21.302146] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   21.302243] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   21.302279] iwlagn 0000:03:00.0: setting latency timer to 64
[   21.302347] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   21.374530] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   21.374594]   alloc irq_desc for 31 on node -1
[   21.374595]   alloc kstat_irqs on node -1
[   21.374615] iwlagn 0000:03:00.0: irq 31 for MSI/MSI-X
[   21.380677] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   21.393547] sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22)
[   21.393564] sdhci-pci 0000:07:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   21.395601] Registered led device: mmc0::
[   21.396620] mmc0: SDHCI controller on PCI [0000:07:03.1] using PIO
[   21.425526] Console: switching to colour frame buffer device 80x30
[   21.482623]   alloc irq_desc for 22 on node -1
[   21.482626]   alloc kstat_irqs on node -1
[   21.482632] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   21.482677] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   21.510662] usbcore: registered new interface driver hiddev
[   21.510720] usbcore: registered new interface driver usbhid
[   21.510723] usbhid: v2.6:USB HID core driver
[   21.552988] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input7
[   21.553133] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[   21.600068] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   21.609968] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   21.609996] HDA Intel 0000:01:00.1: setting latency timer to 64
[   21.613110] type=1505 audit(1276037707.710:5):  operation="profile_load" pid=835 name="/usr/share/gdm/guest-session/Xsession"
[   21.614452] type=1505 audit(1276037707.710:6):  operation="profile_replace" pid=836 name="/sbin/dhclient3"
[   21.614995] type=1505 audit(1276037707.710:7):  operation="profile_replace" pid=836 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   21.615287] type=1505 audit(1276037707.710:8):  operation="profile_replace" pid=836 name="/usr/lib/connman/scripts/dhclient-script"
[   21.617918] type=1505 audit(1276037707.714:9):  operation="profile_load" pid=837 name="/usr/bin/evince"
[   21.624983] type=1505 audit(1276037707.718:10):  operation="profile_load" pid=837 name="/usr/bin/evince-previewer"
[   21.629623] type=1505 audit(1276037707.726:11):  operation="profile_load" pid=837 name="/usr/bin/evince-thumbnailer"
[   21.960892] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
[   22.002089] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   22.340282] Bluetooth: L2CAP ver 2.14
[   22.340285] Bluetooth: L2CAP socket layer initialized
[   22.348863] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.348866] Bluetooth: BNEP filters: protocol multicast
[   22.355780] Bridge firewalling registered
[   22.360410] Bluetooth: SCO (Voice Link) ver 0.6
[   22.360412] Bluetooth: SCO socket layer initialized
[   22.549926]   alloc irq_desc for 32 on node -1
[   22.549929]   alloc kstat_irqs on node -1
[   22.549943] fglrx_pci 0000:01:00.0: irq 32 for MSI/MSI-X
[   22.550581] [fglrx] Firegl kernel thread PID: 1119
[   22.550804] [fglrx] IRQ 32 Enabled
[   22.598659] Bluetooth: RFCOMM TTY layer initialized
[   22.598663] Bluetooth: RFCOMM socket layer initialized
[   22.598664] Bluetooth: RFCOMM ver 1.11
[   22.612642] ppdev: user-space parallel port driver
[   22.719796] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   22.750182] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[   22.901462] Registered led device: iwl-phy0::radio
[   22.901653] Registered led device: iwl-phy0::assoc
[   22.901938] Registered led device: iwl-phy0::RX
[   22.902188] Registered led device: iwl-phy0::TX
[   22.913501] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.075834] [fglrx] Gart USWC size:943 M.
[   23.075837] [fglrx] Gart cacheable size:373 M.
[   23.075841] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   23.075843] [fglrx] Reserved FB block: Unshared offset:fd07000, size:2f5000
[   23.075845] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
[   24.101703] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[   27.014804] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   27.917821] r8169: eth0: link up
[   27.917844] r8169: eth0: link up
[   30.200995] Registered led device: iwl-phy0::radio
[   30.201010] Registered led device: iwl-phy0::assoc
[   30.201024] Registered led device: iwl-phy0::RX
[   30.201039] Registered led device: iwl-phy0::TX
[   30.212535] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.318575] r8169: eth0: link up
[   30.420519] r8169: eth0: link up
[   32.443879] __ratelimit: 12 callbacks suppressed
[   32.443882] type=1503 audit(1276037718.538:16):  operation="open" pid=1566 parent=1551 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
efekan@efekan-laptop:~$ lsmod | grep uvc
efekan@efekan-laptop:~$ luvcview -L
The program 'luvcview' is currently not installed.  You can install it by typing:
sudo apt-get install luvcview
efekan@efekan-laptop:~$ luvcview -w -s 960x720


[heartsmagic]

Derleme ve kurulum aşamaları?

[tirit]

Kusura bakma; cahilliğime verelim ama tam olarak derleme ve kurma aşamasından ne kasdettiğini anlamadım.
Şu linke de bir göz attım; ama  bilemedim : http://forum.ubuntu-tr.net/index.php?topic=179.0

[heartsmagic]

Bir önceki iletimde anlattığım şeyi yaptın mı yani?

Kod Seç Genişlet

sudo aptitude install subversion
svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk
cd trunk
make
sudo make install

[tirit]

Evet yaptım da uvcvideo'yu nereye yazacağımı bilemedim. En son satırın devamına mı? boşluk bırakarak en son satırın devamına mı? Veya enter'a basıp yeni oluşan son satıra mı yazacağım? Ben birincisini yaptım. Bide istediğin çıktıların komutlarını da toptan kopyalayıp yapıştırdım ve çıktıyı aldım. Sanırım bu aşamalarda bir hatam olmalı.

[eribol]

Satırın devamına değil son satıra eklenmeli. Komutları toptan almakta yanlış. Satır satır almalısınız.

[sem]

Bir şey sormak istedim de konuyu bölmüş gibi olmayayım... Normalde toptan alınca komutlar tanınıyor, bu komutların farkı nedir?

[tirit]

Sanırım hepsini doğru yaptım.

dmesg çıktısı:

Kod Seç Genişlet

[    0.275579]   alloc kstat_irqs on node -1
[    0.275582] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.275587] pci 0000:00:1c.2: setting latency timer to 64
[    0.275599] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.275604] pci 0000:00:1c.5: setting latency timer to 64
[    0.275612] pci 0000:00:1e.0: setting latency timer to 64
[    0.275616] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.275619] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.275621] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.275624] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[    0.275626] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.275628] pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
[    0.275630] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff]
[    0.275632] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff]
[    0.275635] pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfdffffff]
[    0.275637] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    0.275639] pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe9fffff]
[    0.275641] pci_bus 0000:04: resource 2 pref mem [0xfa000000-0xfcefffff]
[    0.275643] pci_bus 0000:06: resource 0 io:  [0xe000-0xefff]
[    0.275646] pci_bus 0000:06: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.275648] pci_bus 0000:06: resource 2 pref mem [0xfcf00000-0xfcffffff]
[    0.275650] pci_bus 0000:07: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.275652] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.275654] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
[    0.275689] NET: Registered protocol family 2
[    0.275775] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.276050] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.276482] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.276676] TCP: Hash tables configured (established 131072 bind 65536)
[    0.276678] TCP reno registered
[    0.276744] NET: Registered protocol family 1
[    0.276892] pci 0000:01:00.0: Boot video device
[    0.276921] Simple Boot Flag at 0x51 set to 0x1
[    0.277069] cpufreq-nforce2: No nForce2 chipset.
[    0.277092] Scanning for low memory corruption every 60 seconds
[    0.277178] audit: initializing netlink socket (disabled)
[    0.277187] type=2000 audit(1276091927.275:1): initialized
[    0.285593] highmem bounce pool size: 64 pages
[    0.285598] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.286887] VFS: Disk quotas dquot_6.5.2
[    0.286935] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.287415] fuse init (API version 7.13)
[    0.287486] msgmni has been set to 1664
[    0.287677] alg: No test for stdrng (krng)
[    0.287721] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.287724] io scheduler noop registered
[    0.287726] io scheduler anticipatory registered
[    0.287727] io scheduler deadline registered
[    0.287761] io scheduler cfq registered (default)
[    0.287893]   alloc irq_desc for 24 on node -1
[    0.287895]   alloc kstat_irqs on node -1
[    0.287902] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.287907] pcieport 0000:00:01.0: setting latency timer to 64
[    0.288030]   alloc irq_desc for 25 on node -1
[    0.288031]   alloc kstat_irqs on node -1
[    0.288040] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.288051] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.288197]   alloc irq_desc for 26 on node -1
[    0.288199]   alloc kstat_irqs on node -1
[    0.288207] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.288218] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.288359]   alloc irq_desc for 27 on node -1
[    0.288360]   alloc kstat_irqs on node -1
[    0.288369] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.288379] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.288530]   alloc irq_desc for 28 on node -1
[    0.288532]   alloc kstat_irqs on node -1
[    0.288540] pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
[    0.288551] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.288638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.288920] pciehp: Using ACPI for slot detection.
[    0.289007] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0
[    0.289050] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    0.289058] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.289177] ACPI: AC Adapter [AC0] (on-line)
[    0.289244] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.289253] ACPI: Sleep Button [SLPB]
[    0.289289] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.290561] ACPI: Lid Switch [LID]
[    0.290601] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.290603] ACPI: Power Button [PWRF]
[    0.291339] ACPI: SSDT bff96bc0 00248 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.291941] ACPI: SSDT bff96ea0 00765 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.292655] Monitor-Mwait will be used to enter C-1 state
[    0.292679] Monitor-Mwait will be used to enter C-3 state
[    0.292689] Marking TSC unstable due to TSC halts in idle
[    0.292731] processor LNXCPU:00: registered as cooling_device0
[    0.293029] ACPI: SSDT bff96af0 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.293426] ACPI: SSDT bff96e10 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.293786] Switching to clocksource hpet
[    0.294834] processor LNXCPU:01: registered as cooling_device1
[    0.303086] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
[    0.303093] ACPI: Expecting a [Reference] package element, found type C
[    0.303095] ACPI: Invalid passive threshold
[    0.304599] thermal LNXTHERM:01: registered as thermal_zone0
[    0.304606] ACPI: Thermal Zone [THRM] (60 C)
[    0.305872] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.307098] brd: module loaded
[    0.307492] loop: module loaded
[    0.307559] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.307903] Fixed MDIO Bus: probed
[    0.307930] PPP generic driver version 2.4.2
[    0.307961] tun: Universal TUN/TAP device driver, 1.6
[    0.307962] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.308027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.308050] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.308060] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.308063] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.308089] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.308116] ehci_hcd 0000:00:1a.7: debug port 1
[    0.312013] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.312027] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfddffc00
[    0.316151] isapnp: Scanning for PnP cards...
[    0.347403] Freeing initrd memory: 7771k freed
[    0.350414] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.350592] usb usb1: configuration #1 chosen from 1 choice
[    0.350659] hub 1-0:1.0: USB hub found
[    0.350670] hub 1-0:1.0: 6 ports detected
[    0.350738]   alloc irq_desc for 23 on node -1
[    0.350740]   alloc kstat_irqs on node -1
[    0.350746] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.350767] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.350771] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.350808] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.350835] ehci_hcd 0000:00:1d.7: debug port 1
[    0.354737] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.354753] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfddff800
[    0.372031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.372126] usb usb2: configuration #1 chosen from 1 choice
[    0.372165] hub 2-0:1.0: USB hub found
[    0.372171] hub 2-0:1.0: 6 ports detected
[    0.372261] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.372291] uhci_hcd: USB Universal Host Controller Interface driver
[    0.372365] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.372373] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.372376] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.372421] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.372452] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[    0.372610] usb usb3: configuration #1 chosen from 1 choice
[    0.372632] hub 3-0:1.0: USB hub found
[    0.372638] hub 3-0:1.0: 2 ports detected
[    0.372679]   alloc irq_desc for 21 on node -1
[    0.372681]   alloc kstat_irqs on node -1
[    0.372685] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.372695] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.372700] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.372781] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.372811] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.372900] usb usb4: configuration #1 chosen from 1 choice
[    0.372921] hub 4-0:1.0: USB hub found
[    0.372927] hub 4-0:1.0: 2 ports detected
[    0.373008]   alloc irq_desc for 19 on node -1
[    0.373009]   alloc kstat_irqs on node -1
[    0.373014] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.373035] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.373039] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.373067] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.373134] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[    0.373266] usb usb5: configuration #1 chosen from 1 choice
[    0.373287] hub 5-0:1.0: USB hub found
[    0.373309] hub 5-0:1.0: 2 ports detected
[    0.373347] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.373388] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.373391] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.373416] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.373459] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[    0.373572] usb usb6: configuration #1 chosen from 1 choice
[    0.373607] hub 6-0:1.0: USB hub found
[    0.373613] hub 6-0:1.0: 2 ports detected
[    0.373685] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.373695] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.373700] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.373742] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.373800] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.373927] usb usb7: configuration #1 chosen from 1 choice
[    0.373948] hub 7-0:1.0: USB hub found
[    0.373953] hub 7-0:1.0: 2 ports detected
[    0.374004] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.374010] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.374013] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.374094] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.374118] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[    0.374206] usb usb8: configuration #1 chosen from 1 choice
[    0.374227] hub 8-0:1.0: USB hub found
[    0.374268] hub 8-0:1.0: 2 ports detected
[    0.374418] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.378664] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.380320] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.380335] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.380356] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.380374] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.380394] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.380488] mice: PS/2 mouse device common for all mice
[    0.380668] rtc_cmos 00:03: RTC can wake from S4
[    0.380701] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.380729] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.380815] device-mapper: uevent: version 1.0.3
[    0.380913] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.380970] device-mapper: multipath: version 1.1.0 loaded
[    0.380972] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.381064] EISA: Probing bus 0 at eisa.0
[    0.381069] Cannot allocate resource for EISA slot 1
[    0.381090] EISA: Detected 0 cards.
[    0.381199] cpuidle: using governor ladder
[    0.381272] cpuidle: using governor menu
[    0.381644] TCP cubic registered
[    0.381773] NET: Registered protocol family 10
[    0.382163] lo: Disabled Privacy Extensions
[    0.382446] NET: Registered protocol family 17
[    0.383081] Using IPI No-Shortcut mode
[    0.383144] PM: Resume from disk failed.
[    0.383154] registered taskstats version 1
[    0.384241]   Magic number: 14:495:988
[    0.384273] acpi ATK0100:00: hash matches
[    0.384366] rtc_cmos 00:03: setting system clock to 2010-06-09 13:58:48 UTC (1276091928)
[    0.384368] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.384370] EDD information not available.
[    0.403270] ACPI: Battery Slot [BAT0] (battery present)
[    0.427085] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.657156] isapnp: No Plug & Play device found
[    0.657188] Freeing unused kernel memory: 656k freed
[    0.657537] Write protecting the kernel text: 4676k
[    0.657585] Write protecting the kernel read-only data: 1840k
[    0.671200] udev: starting version 151
[    0.722536] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.722557] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.722599] r8169 0000:06:00.0: setting latency timer to 64
[    0.722656]   alloc irq_desc for 29 on node -1
[    0.722658]   alloc kstat_irqs on node -1
[    0.722673] r8169 0000:06:00.0: irq 29 for MSI/MSI-X
[    0.723222] eth0: RTL8168c/8111c at 0xf805e000, 00:22:15:8e:7c:df, XID 1c4000c0 IRQ 29
[    0.736957] ahci 0000:00:1f.2: version 3.0
[    0.736975] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.737082]   alloc irq_desc for 30 on node -1
[    0.737085]   alloc kstat_irqs on node -1
[    0.737096] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[    0.737152] ahci: SSS flag set, parallel bus scan disabled
[    0.737185] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[    0.737188] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[    0.737194] ahci 0000:00:1f.2: setting latency timer to 64
[    0.765633] scsi0 : ahci
[    0.776331] scsi1 : ahci
[    0.779380] scsi2 : ahci
[    0.779601] scsi3 : ahci
[    0.779652] scsi4 : ahci
[    0.779699] scsi5 : ahci
[    0.780008] ata1: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff100 irq 30
[    0.780012] ata2: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff180 irq 30
[    0.780014] ata3: DUMMY
[    0.780015] ata4: DUMMY
[    0.780017] ata5: DUMMY
[    0.780020] ata6: SATA max UDMA/133 abar m2048@0xfddff000 port 0xfddff380 irq 30
[    0.782245] ohci1394 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.838122] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.096103] usb 2-5: new high speed USB device using ehci_hcd and address 3
[    1.100047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.101342] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.101555] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.101558] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.102711] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
[    1.102713] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.104202] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.104445] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.104448] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.105622] ata1.00: configured for UDMA/133
[    1.120164] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[    1.120296] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.120330] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.120377] sd 0:0:0:0: [sda] Write Protect is off
[    1.120379] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.120399] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.120517]  sda: sda1 sda2 < sda5 >
[    1.172271] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.220104] usb 2-5: device descriptor read/64, error -71
[    1.448112] usb 2-5: device descriptor read/64, error -71
[    1.664103] usb 2-5: new high speed USB device using ehci_hcd and address 4
[    1.788113] usb 2-5: device descriptor read/64, error -71
[    1.844120] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.848830] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.848833] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.853593] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR04, max UDMA/133, ATAPI AN
[    1.858858] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.858861] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.863645] ata2.00: configured for UDMA/133
[    1.987219] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RR04 PQ: 0 ANSI: 5
[    2.016053] usb 2-5: device descriptor read/64, error -71
[    2.112478] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c000164b916]
[    2.232058] usb 2-5: new high speed USB device using ehci_hcd and address 5
[    2.252968] usb 2-5: device descriptor read/8, error -75
[    2.321834] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.321837] Uniform CD-ROM driver Revision: 3.20
[    2.321902] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.321943] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.372711] usb 2-5: device descriptor read/8, error -75
[    2.588101] usb 2-5: new high speed USB device using ehci_hcd and address 6
[    2.608971] usb 2-5: device descriptor read/8, error -75
[    2.640066] ata6: SATA link down (SStatus 0 SControl 300)
[    2.728723] usb 2-5: device descriptor read/8, error -75
[    2.832027] hub 2-0:1.0: unable to enumerate USB device on port 5
[    2.943785] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.096049] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    3.264279] usb 5-1: configuration #1 chosen from 1 choice
[    3.504048] usb 5-2: new full speed USB device using uhci_hcd and address 3
[    3.665259] usb 5-2: configuration #1 chosen from 1 choice
[    3.904046] usb 6-1: new low speed USB device using uhci_hcd and address 2
[    4.077589] usb 6-1: configuration #1 chosen from 1 choice
[    4.384022] usb 8-1: new full speed USB device using uhci_hcd and address 2
[    4.540080] usb 8-1: not running at top speed; connect to a high speed hub
[    4.561083] usb 8-1: unable to read config index 0 descriptor/all
[    4.561086] usb 8-1: can't read configurations, error -75
[    4.672027] usb 8-1: new full speed USB device using uhci_hcd and address 3
[    5.204060] usb 8-1: device not accepting address 3, error -71
[    5.316053] usb 8-1: new full speed USB device using uhci_hcd and address 4
[    5.358077] usb 8-1: not running at top speed; connect to a high speed hub
[    5.370093] usb 8-1: unable to read config index 0 descriptor/start: -75
[    5.370096] usb 8-1: chopping to 0 config(s)
[    5.439167] usb 8-1: no configuration chosen from 0 choices
[   20.742601] udev: starting version 151
[   20.766986] lp: driver loaded but no devices found
[   20.787798] asus_laptop: Asus Laptop Support version 0.42
[   20.844196] Adding 9068652k swap on /dev/sda5.  Priority:-1 extents:1 across:9068652k
[   20.902766] asus_laptop:   F8Vr model detected
[   20.903819] input: Asus Laptop extra buttons as /devices/virtual/input/input5
[   20.903908] Registered led device: asus::touchpad
[   20.916834] Linux agpgart interface v0.103
[   20.922854] vga16fb: initializing
[   20.922857] vga16fb: mapped to 0xc00a0000
[   20.922898] fb0: VGA16 VGA frame buffer device
[   20.938396] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[   20.957533] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   20.957537] Disabling lock debugging due to kernel taint
[   21.028838] type=1505 audit(1276091949.143:2):  operation="profile_load" pid=627 name="/sbin/dhclient3"
[   21.029418] type=1505 audit(1276091949.143:3):  operation="profile_load" pid=627 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   21.029722] type=1505 audit(1276091949.143:4):  operation="profile_load" pid=627 name="/usr/lib/connman/scripts/dhclient-script"
[   21.071842] [fglrx] Maximum main memory to use for locked dma buffers: 2877 MBytes.
[   21.072147] [fglrx]   vendor: 1002 device: 95c4 count: 1
[   21.072607] [fglrx] ioport: bar 1, base 0xc000, size: 0x100
[   21.072624] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.072630] pci 0000:01:00.0: setting latency timer to 64
[   21.072812] [fglrx] Kernel PAT support is enabled
[   21.072832] [fglrx] module loaded - fglrx 8.72.11 [Apr  8 2010] with 1 minors
[   21.079990] sdhci: Secure Digital Host Controller Interface driver
[   21.079992] sdhci: Copyright(c) Pierre Ossman
[   21.081147] sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22)
[   21.081164] sdhci-pci 0000:07:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   21.083202] Registered led device: mmc0::
[   21.084239] mmc0: SDHCI controller on PCI [0000:07:03.1] using PIO
[   21.089080] cfg80211: Calling CRDA to update world regulatory domain
[   21.110990] Bluetooth: Core ver 2.15
[   21.111270] NET: Registered protocol family 31
[   21.111271] Bluetooth: HCI device and connection manager initialized
[   21.111273] Bluetooth: HCI socket layer initialized
[   21.112673] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   21.112766] usbcore: registered new interface driver btusb
[   21.130586] cfg80211: World regulatory domain updated:
[   21.130588] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   21.130590] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.130592] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.130594] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.130596] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.130598] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.186999] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[   21.187001] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   21.187075] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   21.187102] iwlagn 0000:03:00.0: setting latency timer to 64
[   21.187157] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   21.190765] usbcore: registered new interface driver hiddev
[   21.190816] usbcore: registered new interface driver usbhid
[   21.190818] usbhid: v2.6:USB HID core driver
[   21.241097] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   21.241207]   alloc irq_desc for 31 on node -1
[   21.241209]   alloc kstat_irqs on node -1
[   21.241229] iwlagn 0000:03:00.0: irq 31 for MSI/MSI-X
[   21.245180] Console: switching to colour frame buffer device 80x30
[   21.248704] acpi device:1b: registered as cooling_device2
[   21.248822] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/LNXVIDEO:00/input/input6
[   21.248860] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   21.271752] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   21.289428]   alloc irq_desc for 22 on node -1
[   21.289431]   alloc kstat_irqs on node -1
[   21.289438] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   21.289482] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   21.349690] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input7
[   21.349780] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[   21.403064] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   21.412759] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   21.412787] HDA Intel 0000:01:00.1: setting latency timer to 64
[   21.431215] type=1505 audit(1276091949.543:5):  operation="profile_load" pid=812 name="/usr/share/gdm/guest-session/Xsession"
[   21.432579] type=1505 audit(1276091949.547:6):  operation="profile_replace" pid=813 name="/sbin/dhclient3"
[   21.433149] type=1505 audit(1276091949.547:7):  operation="profile_replace" pid=813 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   21.433450] type=1505 audit(1276091949.547:8):  operation="profile_replace" pid=813 name="/usr/lib/connman/scripts/dhclient-script"
[   21.436495] type=1505 audit(1276091949.551:9):  operation="profile_load" pid=814 name="/usr/bin/evince"
[   21.443528] type=1505 audit(1276091949.555:10):  operation="profile_load" pid=814 name="/usr/bin/evince-previewer"
[   21.447922] type=1505 audit(1276091949.559:11):  operation="profile_load" pid=814 name="/usr/bin/evince-thumbnailer"
[   21.927775] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
[   21.970459] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   22.071256] Bluetooth: L2CAP ver 2.14
[   22.071258] Bluetooth: L2CAP socket layer initialized
[   22.075623] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.075626] Bluetooth: BNEP filters: protocol multicast
[   22.086208] Bridge firewalling registered
[   22.091367] Bluetooth: SCO (Voice Link) ver 0.6
[   22.091369] Bluetooth: SCO socket layer initialized
[   22.130928] ppdev: user-space parallel port driver
[   22.307932]   alloc irq_desc for 32 on node -1
[   22.307935]   alloc kstat_irqs on node -1
[   22.307947] fglrx_pci 0000:01:00.0: irq 32 for MSI/MSI-X
[   22.308585] [fglrx] Firegl kernel thread PID: 1100
[   22.308812] [fglrx] IRQ 32 Enabled
[   22.354049] Bluetooth: RFCOMM TTY layer initialized
[   22.354052] Bluetooth: RFCOMM socket layer initialized
[   22.354054] Bluetooth: RFCOMM ver 1.11
[   22.397539] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   22.425110] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[   22.573189] Registered led device: iwl-phy0::radio
[   22.573204] Registered led device: iwl-phy0::assoc
[   22.573217] Registered led device: iwl-phy0::RX
[   22.573230] Registered led device: iwl-phy0::TX
[   22.585655] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.783676] [fglrx] Gart USWC size:943 M.
[   22.783679] [fglrx] Gart cacheable size:373 M.
[   22.783683] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   22.783685] [fglrx] Reserved FB block: Unshared offset:fd07000, size:2f5000
[   22.783687] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
[   23.813642] [fglrx:fireglAsyncioIntEnableMsgHandler] *ERROR* interrupt source ff000066 is not supported on this hardware (return code = 1)
[   26.746934] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   27.898100] r8169: eth0: link up
[   27.898107] r8169: eth0: link up
[   30.199123] Registered led device: iwl-phy0::radio
[   30.199140] Registered led device: iwl-phy0::assoc
[   30.199153] Registered led device: iwl-phy0::RX
[   30.199169] Registered led device: iwl-phy0::TX
[   30.253933] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.390770] r8169: eth0: link up
[   30.496588] r8169: eth0: link up
[   32.520570] __ratelimit: 12 callbacks suppressed
[   32.520572] type=1503 audit(1276091960.635:16):  operation="open" pid=1565 parent=1528 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
efekan@efekan-laptop:~/trunk$


lsmod | grep uvc çıktısı: Herhangi bir çıktı alamadım

luvcview -L çıktısı:

Kod Seç Genişlet

efekan@efekan-laptop:~/trunk$ luvcview -L
luvcview 0.2.6

SDL information:
  Video driver: x11
  A window manager is available
Device information:
  Device path:  /dev/video0
ERROR opening V4L interface: No such file or directory
efekan@efekan-laptop:~/trunk$


luvcview -w -s 960x720 çıktısı

Kod Seç Genişlet

efekan@efekan-laptop:~/trunk$ luvcview -w -s 960x720
luvcview 0.2.6

SDL information:
  Video driver: x11
  A window manager is available
Device information:
  Device path:  /dev/video0
ERROR opening V4L interface: No such file or directory
efekan@efekan-laptop:~/trunk$