ubuntu 9.10 Kurulumunda Harddisk Bölümleme Sorunu

[lastbas]

Ya arkadaşlar ben ubuntu 9.10 u kurmaya çalıştım kurulumda dil seçimi filan yaptım ama harddisk bölümlemede harddiski görmüyor cd de sağlam şüphesiz lütfen yardım edin

[localhost]

Kuruluma baslamadan önce Terminalden

Kod Seç Genişlet

sudo fdisk -l ciktisini vermeniz gerekiyor.

[lastbas]

nasıl vercem

[qhareb]

Sol üstte Uygulamalar'dan Donatılar oradan da Uçbirim'i tıkla açılan ekrana verilen kodu gir. Çıktıyı buraya yapıştır. Arkadaşlar ona göre yardımcı olacaktır.

[lastbas]

ubuntu@ubuntu:~$ sudo fdisk -c
fdisk: invalid option -- 'c'

Usage: fdisk [-b SSZ] [-u] DISK     Change partition table
       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)
       fdisk -s PARTITION           Give partition size(s) in blocks
       fdisk -v                     Give fdisk version
Here DISK is something like /dev/hdb or /dev/sda
and PARTITION is something like /dev/hda7
-u: give Start and End in sector (instead of cylinder) units
-b 2048: (for certain MO disks) use 2048-byte sectors
ubuntu@ubuntu:~$ sudo fdisk -d
fdisk: invalid option -- 'd'

Usage: fdisk [-b SSZ] [-u] DISK     Change partition table
       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)
       fdisk -s PARTITION           Give partition size(s) in blocks
       fdisk -v                     Give fdisk version
Here DISK is something like /dev/hdb or /dev/sda
and PARTITION is something like /dev/hda7
-u: give Start and End in sector (instead of cylinder) units
-b 2048: (for certain MO disks) use 2048-byte sectors
ubuntu@ubuntu:~$ sudo fdisk -E
fdisk: invalid option -- 'E'

Usage: fdisk [-b SSZ] [-u] DISK     Change partition table
       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)
       fdisk -s PARTITION           Give partition size(s) in blocks
       fdisk -v                     Give fdisk version
Here DISK is something like /dev/hdb or /dev/sda
and PARTITION is something like /dev/hda7
-u: give Start and End in sector (instead of cylinder) units
-b 2048: (for certain MO disks) use 2048-byte sectors
ubuntu@ubuntu:~$

bende üç bölüm var C:45gb ,D:90gb ,E:16gb
böyle bişey çıktı

[eribol]

Kod Seç Genişlet

fdisk -l olmalı. Sanırım siz sadece fdisk demişsiniz.

[lastbas]

ubuntu@ubuntu:~$ sudo fdisk -c
fdisk: invalid option -- 'c'

Usage: fdisk [-b SSZ] [-u] DISK     Change partition table
       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)
       fdisk -s PARTITION           Give partition size(s) in blocks
       fdisk -v                     Give fdisk version
Here DISK is something like /dev/hdb or /dev/sda
and PARTITION is something like /dev/hda7
-u: give Start and End in sector (instead of cylinder) units
-b 2048: (for certain MO disks) use 2048-byte sectors
ubuntu@ubuntu:~$ sudo fdisk -d
fdisk: invalid option -- 'd'

Usage: fdisk [-b SSZ] [-u] DISK     Change partition table
       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)
       fdisk -s PARTITION           Give partition size(s) in blocks
       fdisk -v                     Give fdisk version
Here DISK is something like /dev/hdb or /dev/sda
and PARTITION is something like /dev/hda7
-u: give Start and End in sector (instead of cylinder) units
-b 2048: (for certain MO disks) use 2048-byte sectors
ubuntu@ubuntu:~$ sudo fdisk -E
fdisk: invalid option -- 'E'

Usage: fdisk [-b SSZ] [-u] DISK     Change partition table
       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)
       fdisk -s PARTITION           Give partition size(s) in blocks
       fdisk -v                     Give fdisk version
Here DISK is something like /dev/hdb or /dev/sda
and PARTITION is something like /dev/hda7
-u: give Start and End in sector (instead of cylinder) units
-b 2048: (for certain MO disks) use 2048-byte sectors
ubuntu@ubuntu:~$

fdisk -l yazınca bişey çıkmıyo ancak l yerine c,d,e yazınca çıkıyo
bende üç bölüm var C:45gb ,D:90gb ,E:16gb
böyle bişey çıktı

[eribol]

Lemanın l'si değil mi? 1(bir)değil o. Ayrıca çıkmamışsa bile olduğu gibi o komutu aktarın buraya görelim bakalım ne demiş? Hepsinde birşey demişse onda da demiştir.

[lastbas]

ubuntu@ubuntu:~$ sudo fdisk -l
ubuntu@ubuntu:~$

böyle oluyo

[eribol]

Şu an yüklü bir sistem var mı Windows veya başka bir sistem? Yani bios görmüyorsa anlarım ama herşey yerindeyse gariplik var.

Kod Seç Genişlet

lshal komutunun çıktılarını quote etiketiyle aktarır mısınız?

[lastbas]

windows 7 yüklü sadece yanına ubuntu 9.10 yada 9.4 kurmak istiyorum
şu an ve az önceki bu komutları 9.4'te girdim bunlar çıktı

Kod Seç Genişlet

usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0000:00:10.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_1106_571'
  info.linux.driver = 'pata_via'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 138  (0x8a)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1'  (string)
  pci.product = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE'  (string)
  pci.product_id = 1393  (0x571)  (int)
  pci.subsys_product_id = 1393  (0x571)  (int)
  pci.subsys_vendor = 'VIA Technologies, Inc.'  (string)
  pci.subsys_vendor_id = 4358  (0x1106)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/host4/scsi_host/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/host5'  (string)
  scsi_host.host = 5  (0x5)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/host5/scsi_host/host5'  (string)
  scsi_host.host = 5  (0x5)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0'
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/host5/target5:0:0/5:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 5  (0x5)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'CDRW/DVD CB1100B'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = '_NEC'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_CDRW_DVD_CB1100B'
  access_control.file = '/dev/sr0'  (string)
  access_control.type = 'cdrom'  (string)
  block.device = '/dev/sr0'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CDRW_DVD_CB1100B'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0'  (string)
  info.product = 'CDRW/DVD CB1100B'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_CDRW_DVD_CB1100B'  (string)
  info.vendor = '_NEC'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/host5/target5:0:0/5:0:0:0/block/sr0'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'pci'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrdl = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 7056  (0x1b90)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 5645  (0x160d)  (int)
  storage.cdrom.write_speeds = {'5645', '4234', '2822', '1411'} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = 'NS00'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'CDRW/DVD CB1100B'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 732913664  (0x2baf6000)  (uint64)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = '_NEC'  (string)

udi = '/org/freedesktop/Hal/devices/volume_label_Ubuntu_9_04_i386'
  block.device = '/dev/sr0'  (string)
  block.is_volume = true  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CDRW_DVD_CB1100B'  (string)
  info.capabilities = {'volume.disc', 'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_model_CDRW_DVD_CB1100B'  (string)
  info.product = 'Ubuntu 9.04 i386'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_label_Ubuntu_9_04_i386'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/host5/target5:0:0/5:0:0:0/block/sr0/fakevolume'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 2048  (0x800)  (int)
  volume.disc.capacity = 735051776  (0x2bd00000)  (uint64)
  volume.disc.has_audio = false  (bool)
  volume.disc.has_data = true  (bool)
  volume.disc.is_appendable = false  (bool)
  volume.disc.is_blank = false  (bool)
  volume.disc.is_blurayvideo = false  (bool)
  volume.disc.is_rewritable = false  (bool)
  volume.disc.is_svcd = false  (bool)
  volume.disc.is_vcd = false  (bool)
  volume.disc.is_videodvd = false  (bool)
  volume.disc.type = 'cd_r'  (string)
  volume.fstype = 'iso9660'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = ''  (string)
  volume.ignore = false  (bool)
  volume.is_disc = true  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = true  (bool)
  volume.is_partition = false  (bool)
  volume.label = 'Ubuntu 9.04 i386'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'uid=', 'mode=', 'iocharset='} (string list)
  volume.mount_point = '/cdrom'  (string)
  volume.num_blocks = 1431472  (0x15d7b0)  (uint64)
  volume.size = 732913664  (0x2baf6000)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0_scsi_generic'
  access_control.file = '/dev/sg0'  (string)
  access_control.type = 'cdrom'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'scsi_generic', 'access_control'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.subsystem = 'scsi_generic'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/host5/target5:0:0/5:0:0:0/scsi_generic/sg0'  (string)
  scsi_generic.device = '/dev/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1106_3349'
  info.linux.driver = 'ahci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'VT8251 AHCI/SATA 4-Port Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3349'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 143  (0x8f)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0'  (string)
  pci.product = 'VT8251 AHCI/SATA 4-Port Controller'  (string)
  pci.product_id = 13129  (0x3349)  (int)
  pci.subsys_product_id = 13129  (0x3349)  (int)
  pci.subsys_vendor = 'VIA Technologies, Inc.'  (string)
  pci.subsys_vendor_id = 4358  (0x1106)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_3349_scsi_host_2'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3349'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3349_scsi_host_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host3/scsi_host/host3'  (string)
  scsi_host.host = 3  (0x3)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_3349_scsi_host_1'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3349'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3349_scsi_host_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host2/scsi_host/host2'  (string)
  scsi_host.host = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_3349_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3349'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3349_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host1/scsi_host/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_3349_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3349'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3349_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/host0/scsi_host/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_b188'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'VT8237 PCI bridge [K8T800/K8T890 South]'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_b188'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.product = 'VT8237 PCI bridge [K8T800/K8T890 South]'  (string)
  pci.product_id = 45448  (0xb188)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_326'
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_b188'  (string)
  info.product = 'NV34 [GeForce FX 5500]'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_326'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
  pci.product = 'NV34 [GeForce FX 5500]'  (string)
  pci.product_id = 806  (0x326)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_7204'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8M800 Host Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_7204'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7'  (string)
  pci.product = 'K8M800 Host Bridge'  (string)
  pci.product_id = 29188  (0x7204)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_4204'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8M800 Host Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_4204'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4'  (string)
  pci.product = 'K8M800 Host Bridge'  (string)
  pci.product_id = 16900  (0x4204)  (int)
  pci.subsys_product_id = 16900  (0x4204)  (int)
  pci.subsys_vendor = 'VIA Technologies, Inc.'  (string)
  pci.subsys_vendor_id = 4358  (0x1106)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_3204'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8M800 Host Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3204'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3'  (string)
  pci.product = 'K8M800 Host Bridge'  (string)
  pci.product_id = 12804  (0x3204)  (int)
  pci.subsys_product_id = 12804  (0x3204)  (int)
  pci.subsys_vendor = 'VIA Technologies, Inc.'  (string)
  pci.subsys_vendor_id = 4358  (0x1106)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_2204'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8M800 Host Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_2204'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2'  (string)
  pci.product = 'K8M800 Host Bridge'  (string)
  pci.product_id = 8708  (0x2204)  (int)
  pci.subsys_product_id = 8708  (0x2204)  (int)
  pci.subsys_vendor = 'VIA Technologies, Inc.'  (string)
  pci.subsys_vendor_id = 4358  (0x1106)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_1204'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8M800 Host Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_1204'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1'  (string)
  pci.product = 'K8M800 Host Bridge'  (string)
  pci.product_id = 4612  (0x1204)  (int)
  pci.subsys_product_id = 4612  (0x1204)  (int)
  pci.subsys_vendor = 'VIA Technologies, Inc.'  (string)
  pci.subsys_vendor_id = 4358  (0x1106)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_204'
  info.linux.driver = 'agpgart-amd64'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'K8M800 Host Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_204'  (string)
  info.vendor = 'VIA Technologies, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product = 'K8M800 Host Bridge'  (string)
  pci.product_id = 516  (0x204)  (int)
  pci.subsys_product_id = 516  (0x204)  (int)
  pci.subsys_vendor = 'VIA Technologies, Inc.'  (string)
  pci.subsys_vendor_id = 4358  (0x1106)  (int)
  pci.vendor = 'VIA Technologies, Inc.'  (string)
  pci.vendor_id = 4358  (0x1106)  (int)

udi = '/org/freedesktop/Hal/devices/fuse'
  access_control.file = '/dev/fuse'  (string)
  access_control.type = 'camera'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'access_control'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_204'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/fuse'  (string)


Dumped 116 device(s) from the Global Device List.
------------------------------------------------

ubuntu@ubuntu:~$


[eribol]

Yapacak birşey yok. İmkansıza yakın bir şekilde sabit diskiniz kernel tarafından algılanmıyor maalesef.

[lastbas]

hadi ya o zaman bi sorum daha olacak ben şimdi windows 7 kullanıyorum ondan önce xp vardı rahat format atıyordum xp cd si ile şimdi atamıyorum sadece win 7 dvd si ile win 7 kurabiliyorum xp cdsini takınca yeniden başlattığımda kura başladığımda 'kur donanım yapılandırmanız inceleniyor' diyo hemen ardından siyah ekran olup kalıyor sizce neden olabilir bu sorun?

[eribol]

Bu sorunu bilemem zira windowsun anlaşılmaz sorunları yüzünden linux kullanıyorum. Bu sorunda onlardan biri(en azından anladığım bu). Ancak denemenizi istediğim wubi kurulumunu yapmanızdır.

Bu win7 sabitdisklere birşeyler ediyor olmasın. Paranoyaklaştırıyor bu microsoft.

[lastbas]

wubi ile denedim  bekliyorum bişey gelmiyor wubi ile
win 7 de wubiyi açıyorum yüklüyorum bölüme reset atıp başlıyorum ubuntu'yu seçince bekliyorum bişey gelmiyor
ben c,d,e ye teker teker yüklemeyi denedim wubi ile hep aynı oldu

[eribol]

Buradan birşey söylemek benim için gerçekten zor. Hiçbir fikrim yok maalesef.

[lastbas]

tamam her şey için saol

[heartsmagic]

fdisk çıktısının bir şey döndürmemesi cidden garip.
BIOS üzerinde disklerle ilgili işlem yapabileceğin bir alan var mı? Dizüstü mü bu? Eğer öyleyse marka ve modeli nedir?