[Arşiv]ubuntu 10.04 cd rom'u goremiyorum

Başlatan blackadder, 04 Nisan 2010 - 12:26:25

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

blackadder

guncellemeleri yaptım falan ama cd veya dvd takıyorum hiç bişi yok yerlerden  bakıyorum ordada yok
toshiba satellite a 50

heartsmagic

Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

blackadder

#2
x0-0xff), disabling
[    0.072492] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072497] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072501] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072506] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072511] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072515] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072520] pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072525] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072529] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072534] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072539] pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072543] pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072548] pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072553] pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072557] pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072562] pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.5 BAR 0 (0x0-0xff), disabling
[    0.072567] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072574] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072578] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072583] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072587] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072592] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072597] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072601] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072606] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.5 BAR 1 (0x0-0x3f), disabling
[    0.072614] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072619] pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072623] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072628] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072632] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072637] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072641] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072646] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072652] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072657] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072661] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072666] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072670] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072675] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072680] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072684] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072689] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072694] pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072698] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072703] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072708] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072712] pnp 00:08: io resource (0xa4-0xa5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072717] pnp 00:08: io resource (0xa8-0xa9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072722] pnp 00:08: io resource (0xac-0xad) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072726] pnp 00:08: io resource (0xb0-0xb5) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072731] pnp 00:08: io resource (0xb8-0xb9) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072736] pnp 00:08: io resource (0xbc-0xbd) overlaps 0000:00:1f.6 BAR 0 (0x0-0xff), disabling
[    0.072741] pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072745] pnp 00:08: io resource (0x62-0x62) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072750] pnp 00:08: io resource (0x66-0x66) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072756] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072761] pnp 00:08: io resource (0x24-0x25) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072766] pnp 00:08: io resource (0x28-0x29) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072770] pnp 00:08: io resource (0x2c-0x2d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072775] pnp 00:08: io resource (0x30-0x31) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072779] pnp 00:08: io resource (0x34-0x35) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072784] pnp 00:08: io resource (0x38-0x39) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072789] pnp 00:08: io resource (0x3c-0x3d) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072793] pnp 00:08: io resource (0x50-0x53) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072798] pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072803] pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.072807] pnp 00:08: io resource (0x72-0x77) overlaps 0000:00:1f.6 BAR 1 (0x0-0x7f), disabling
[    0.073322] pnp: PnP ACPI: found 9 devices
[    0.073325] ACPI: ACPI bus type pnp unregistered
[    0.073329] PnPBIOS: Disabled by ACPI PNP
[    0.073342] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.073347] system 00:00: iomem range 0xe0000-0xeffff could not be reserved
[    0.073351] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    0.073355] system 00:00: iomem range 0x100000-0x2ef3ffff could not be reserved
[    0.073360] system 00:00: iomem range 0x2ef40000-0x2ef4ffff could not be reserved
[    0.073364] system 00:00: iomem range 0x2ef50000-0x2effffff has been reserved
[    0.073368] system 00:00: iomem range 0xfec10000-0xfec1ffff has been reserved
[    0.073372] system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved
[    0.073376] system 00:00: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.073381] system 00:00: iomem range 0xfff00000-0xffffffff has been reserved
[    0.073391] system 00:08: ioport range 0x1e0-0x1e7 has been reserved
[    0.073395] system 00:08: ioport range 0x480-0x48f has been reserved
[    0.073399] system 00:08: ioport range 0x680-0x6ff has been reserved
[    0.073403] system 00:08: ioport range 0xd800-0xd87f has been reserved
[    0.073407] system 00:08: ioport range 0xd880-0xd89f has been reserved
[    0.073411] system 00:08: ioport range 0xd8a0-0xd8bf has been reserved
[    0.073415] system 00:08: ioport range 0xe000-0xe07f has been reserved
[    0.073419] system 00:08: ioport range 0xe080-0xe0ff has been reserved
[    0.073423] system 00:08: ioport range 0xe400-0xe47f has been reserved
[    0.073427] system 00:08: ioport range 0xe480-0xe4ff has been reserved
[    0.073431] system 00:08: ioport range 0xe800-0xe87f has been reserved
[    0.073435] system 00:08: ioport range 0xe880-0xe8ff has been reserved
[    0.073440] system 00:08: ioport range 0xec00-0xec7f has been reserved
[    0.073444] system 00:08: ioport range 0xec80-0xecff has been reserved
[    0.073448] system 00:08: ioport range 0xeeac-0xeeac has been reserved
[    0.073452] system 00:08: ioport range 0xeeb0-0xeebf has been reserved
[    0.073456] system 00:08: ioport range 0xeec0-0xeeff has been reserved
[    0.073463] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.108217] pci 0000:01:0b.0: CardBus bridge, secondary bus 0000:02
[    0.108221] pci 0000:01:0b.0:   IO window: 0x00c000-0x00c0ff
[    0.108227] pci 0000:01:0b.0:   IO window: 0x00c400-0x00c4ff
[    0.108233] pci 0000:01:0b.0:   PREFETCH window: 0x38000000-0x3bffffff
[    0.108238] pci 0000:01:0b.0:   MEM window: 0x40000000-0x43ffffff
[    0.108244] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.108249] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
[    0.108255] pci 0000:00:1e.0:   MEM window: 0xcff00000-0xcfffffff
[    0.108261] pci 0000:00:1e.0:   PREFETCH window: 0x38000000-0x3bffffff
[    0.108276] pci 0000:00:1e.0: setting latency timer to 64
[    0.108286] pci 0000:01:0b.0: enabling device (0000 -> 0003)
[    0.108529] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.108532] PCI: setting IRQ 11 as level-triggered
[    0.108538] pci 0000:01:0b.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    0.108547] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.108551] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.108555] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.108559] pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
[    0.108563] pci_bus 0000:01: resource 2 pref mem [0x38000000-0x3bffffff]
[    0.108566] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.108570] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[    0.108574] pci_bus 0000:02: resource 0 io:  [0xc000-0xc0ff]
[    0.108577] pci_bus 0000:02: resource 1 io:  [0xc400-0xc4ff]
[    0.108581] pci_bus 0000:02: resource 2 pref mem [0x38000000-0x3bffffff]
[    0.108585] pci_bus 0000:02: resource 3 mem: [0x40000000-0x43ffffff]
[    0.108621] NET: Registered protocol family 2
[    0.108730] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.109113] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.110132] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.110802] TCP: Hash tables configured (established 131072 bind 65536)
[    0.110806] TCP reno registered
[    0.110968] NET: Registered protocol family 1
[    0.111003] pci 0000:00:02.0: Boot video device
[    0.111076] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[    0.111215] Simple Boot Flag at 0x7c set to 0x1
[    0.111327] cpufreq-nforce2: No nForce2 chipset.
[    0.111357] Scanning for low memory corruption every 60 seconds
[    0.111527] audit: initializing netlink socket (disabled)
[    0.111550] type=2000 audit(1271196368.109:1): initialized
[    0.125443] Trying to unpack rootfs image as initramfs...
[    0.142169] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.144286] VFS: Disk quotas dquot_6.5.2
[    0.144365] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.150173] fuse init (API version 7.13)
[    0.150308] msgmni has been set to 1450
[    0.150612] alg: No test for stdrng (krng)
[    0.150692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.150696] io scheduler noop registered
[    0.150699] io scheduler anticipatory registered
[    0.150701] io scheduler deadline registered
[    0.150755] io scheduler cfq registered (default)
[    0.150910] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.150941] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.151122] ACPI: AC Adapter [ADP1] (on-line)
[    0.151214] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.151263] ACPI: Lid Switch [LID]
[    0.151321] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.151327] ACPI: Power Button [PWRB]
[    0.151387] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.151391] ACPI: Power Button [PWRF]
[    0.151775] fan PNP0C0B:00: registered as cooling_device0
[    0.151782] ACPI: Fan [FAN] (off)
[    0.151961] Marking TSC unstable due to TSC halts in idle
[    0.152000] processor LNXCPU:00: registered as cooling_device1
[    0.154555] thermal LNXTHERM:01: registered as thermal_zone0
[    0.154566] ACPI: Thermal Zone [THRM] (70 C)
[    0.154628] Switching to clocksource acpi_pm
[    0.159642] ACPI: Battery Slot [BAT1] (battery absent)
[    0.159657] isapnp: Scanning for PnP cards...
[    0.165394] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.165831] serial 0000:00:1f.6: power state changed by ACPI to D0
[    0.165840] serial 0000:00:1f.6: enabling device (0000 -> 0001)
[    0.166131] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.166137] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.166145] serial 0000:00:1f.6: PCI INT B disabled
[    0.167442] brd: module loaded
[    0.172212] loop: module loaded
[    0.172340] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.172474] ata_piix 0000:00:1f.1: version 2.13
[    0.172492] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    0.172543] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.172646] scsi0 : ata_piix
[    0.216171] scsi1 : ata_piix
[    0.216958] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[    0.216962] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[    0.217447] Fixed MDIO Bus: probed
[    0.217494] PPP generic driver version 2.4.2
[    0.217557] tun: Universal TUN/TAP device driver, 1.6
[    0.217560] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.217663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.217683] ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002)
[    0.217927] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    0.217932] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    0.217955] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.217960] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.218002] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.218037] ehci_hcd 0000:00:1d.7: debug port 1
[    0.221931] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.228045] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x3c080000
[    0.240428] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.240598] usb usb1: configuration #1 chosen from 1 choice
[    0.240640] hub 1-0:1.0: USB hub found
[    0.240655] hub 1-0:1.0: 6 ports detected
[    0.240742] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.240765] uhci_hcd: USB Universal Host Controller Interface driver
[    0.241131] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.241135] PCI: setting IRQ 10 as level-triggered
[    0.241141] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    0.241152] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.241157] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.241213] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.241242] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000018c0
[    0.241353] usb usb2: configuration #1 chosen from 1 choice
[    0.241388] hub 2-0:1.0: USB hub found
[    0.241398] hub 2-0:1.0: 2 ports detected
[    0.241682] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.241687] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    0.241694] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.241698] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.241738] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.241760] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018e0
[    0.241868] usb usb3: configuration #1 chosen from 1 choice
[    0.241903] hub 3-0:1.0: USB hub found
[    0.241911] hub 3-0:1.0: 2 ports detected
[    0.241969] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    0.241976] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.241980] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.242024] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.242045] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001c00
[    0.242169] usb usb4: configuration #1 chosen from 1 choice
[    0.242203] hub 4-0:1.0: USB hub found
[    0.242211] hub 4-0:1.0: 2 ports detected
[    0.242334] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.252959] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.252974] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.253167] mice: PS/2 mouse device common for all mice
[    0.253392] rtc_cmos 00:07: RTC can wake from S4
[    0.253445] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.253464] rtc0: alarms up to one year, 114 bytes nvram
[    0.253626] device-mapper: uevent: version 1.0.3
[    0.253784] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.255511] device-mapper: multipath: version 1.1.0 loaded
[    0.255515] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.258341] EISA: Probing bus 0 at eisa.0
[    0.258349] Cannot allocate resource for EISA slot 1
[    0.258369] EISA: Detected 0 cards.
[    0.258490] cpuidle: using governor ladder
[    0.258570] cpuidle: using governor menu
[    0.259130] TCP cubic registered
[    0.259348] NET: Registered protocol family 10
[    0.259913] lo: Disabled Privacy Extensions
[    0.260347] NET: Registered protocol family 17
[    0.260585] Using IPI No-Shortcut mode
[    0.260688] PM: Resume from disk failed.
[    0.260705] registered taskstats version 1
[    0.261004]   Magic number: 6:363:148
[    0.261032] bdi 1:0: hash matches
[    0.261074] acpi device:19: hash matches
[    0.261173] rtc_cmos 00:07: setting system clock to 2010-04-13 22:06:08 UTC (1271196368)
[    0.261178] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.261181] EDD information not available.
[    0.270618] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.416750] ata2.01: NODEV after polling detection
[    0.416865] ata1.00: ATA-7: FUJITSU MHV2080AT, 000000A0, max UDMA/100
[    0.416869] ata1.00: 156301488 sectors, multi 16: LBA
[    0.424848] ata2.00: ATAPI: MATSHITADVD-RAM UJ-820S, 1.00, max UDMA/33
[    0.432544] ata1.00: configured for UDMA/100
[    0.440683] ata2.00: configured for UDMA/33
[    0.714690] Freeing initrd memory: 7652k freed
[    0.809067] isapnp: No Plug & Play device found
[    0.809321] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080A 0000 PQ: 0 ANSI: 5
[    0.809584] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.809855] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    0.809922] sd 0:0:0:0: [sda] Write Protect is off
[    0.809926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.809959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.810157]  sda:
[    0.811485] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-820S  1.00 PQ: 0 ANSI: 5
[    0.813052] sr0: scsi3-mmc drive: 31x/31x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.813056] Uniform CD-ROM driver Revision: 3.20
[    0.813188] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.813254] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.851631]  sda1 sda2 < sda5 sda6 sda7 > sda3
[    0.912073] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.912094] Freeing unused kernel memory: 656k freed
[    0.912650] Write protecting the kernel text: 4676k
[    0.912698] Write protecting the kernel read-only data: 1840k
[    0.931527] udev: starting version 151
[    1.200847] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.200853] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.201202] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[    1.201209] e100 0000:01:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[    1.224501] e100 0000:01:08.0: PME# disabled
[    1.225647] e100: eth0: e100_probe: addr 0xcfffe000, irq 11, MAC addr 00:0e:7b:a6:83:19
[    1.225670] ohci1394 0000:01:07.0: enabling device (0000 -> 0002)
[    1.225911] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[    1.225917] ohci1394 0000:01:07.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
[    1.280073] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[cff05000-cff057ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.850874] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    2.552191] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000039000058e8e4]
[    3.876763] Adding 1353720k swap on /dev/sda6.  Priority:-1 extents:1 across:1353720k
[    4.686828] udev: starting version 151
[    6.041603] lp: driver loaded but no devices found
[    6.248862] type=1505 audit(1271185574.486:2):  operation="profile_load" pid=459 name="/sbin/dhclient3"
[    6.249666] type=1505 audit(1271185574.486:3):  operation="profile_load" pid=459 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    6.250100] type=1505 audit(1271185574.486:4):  operation="profile_load" pid=459 name="/usr/lib/connman/scripts/dhclient-script"
[    6.685907] intel_rng: FWH not detected
[    6.864984] Linux agpgart interface v0.103
[    6.888932] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.904197] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19-dev-acpikeys
[    6.904202] toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
[    6.905824] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[    6.905829] toshiba_acpi: ktoshkeyd will check 2 times per second
[    6.906338] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[    6.906900] agpgart-intel 0000:00:00.0: detected 16252K stolen memory
[    6.914761] toshiba_acpi: Dropped 0 keys from the queue on startup
[    6.915417] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[    7.042557] lib80211: common routines for IEEE802.11 drivers
[    7.042561] lib80211_crypt: registered algorithm 'NULL'
[    7.084904] ieee80211: 802.11 data/management/control stack, git-1.1.13
[    7.084908] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[    7.101625] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    7.103129] acpi device:0c: registered as cooling_device2
[    7.104117] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[    7.104281] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[    7.567609] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[    7.567614] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[    7.567993] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[    7.568000] ipw2200 0000:01:05.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
[    7.570371] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[    7.570429] ipw2200 0000:01:05.0: firmware: requesting ipw2200-bss.fw
[    7.733764] [drm] Initialized drm 1.1.0 20060810
[    8.071619] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
[    8.097690] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[    8.481429] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[    8.481489] yenta_cardbus 0000:01:0b.0: CardBus bridge found [1179:0001]
[    8.609283] yenta_cardbus 0000:01:0b.0: ISA IRQ mask 0x00b8, PCI irq 11
[    8.609289] yenta_cardbus 0000:01:0b.0: Socket status: 30000007
[    8.609300] yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[    8.609306] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: clean.
[    8.609594] yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff
[    8.609599] yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0x38000000 - 0x3bffffff
[    8.616971] i915 0000:00:02.0: power state changed by ACPI to D0
[    8.616986] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    8.616993] i915 0000:00:02.0: setting latency timer to 64
[    8.627528] [drm] set up 15M of stolen space
[    8.648643] [drm] initialized overlay support
[    9.237480] fb0: inteldrmfb frame buffer device
[    9.237484] registered panic notifier
[    9.237496] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.345553] vga16fb: initializing
[    9.345559] vga16fb: mapped to 0xc00a0000
[    9.345564] vga16fb: not registering due to another framebuffer present
[    9.543975] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[    9.544839] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[    9.545192] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    9.545505] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    9.545982] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    9.896949] Console: switching to colour frame buffer device 128x48
[   10.490406] Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
[   10.490418] Intel ICH 0000:00:1f.5: enabling device (0000 -> 0003)
[   10.490429] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   10.490464] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   11.316123] intel8x0_measure_ac97_clock: measured 55515 usecs (2675 samples)
[   11.316128] intel8x0: clocking to 48000
[   12.997596] type=1505 audit(1271185581.236:5):  operation="profile_load" pid=685 name="/usr/share/gdm/guest-session/Xsession"
[   12.999742] type=1505 audit(1271185581.236:6):  operation="profile_replace" pid=686 name="/sbin/dhclient3"
[   13.000863] type=1505 audit(1271185581.238:7):  operation="profile_replace" pid=686 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.001305] type=1505 audit(1271185581.238:8):  operation="profile_replace" pid=686 name="/usr/lib/connman/scripts/dhclient-script"
[   13.338230] type=1505 audit(1271185581.574:9):  operation="profile_load" pid=687 name="/usr/bin/evince"
[   13.349047] type=1505 audit(1271185581.586:10):  operation="profile_load" pid=687 name="/usr/bin/evince-previewer"
[   13.358039] type=1505 audit(1271185581.594:11):  operation="profile_load" pid=687 name="/usr/bin/evince-thumbnailer"
[   13.583159] type=1505 audit(1271185581.818:12):  operation="profile_load" pid=693 name="/usr/lib/cups/backend/cups-pdf"
[   13.584365] type=1505 audit(1271185581.822:13):  operation="profile_load" pid=693 name="/usr/sbin/cupsd"
[   13.976667] type=1505 audit(1271185582.215:14):  operation="profile_load" pid=700 name="/usr/sbin/tcpdump"
[   16.933964] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.890851] ppdev: user-space parallel port driver
[   27.256021] eth1: no IPv6 routers present
[   50.066969] lib80211_crypt: registered algorithm 'WEP'



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 13 Nisan 2010 - 22:14:48

grep cd yazınca da bekliyor herhangi  bir şey cıkmıyor

eribol

Çıktıları quote etiketi kullanarak eklerseniz okuyan kişiler için daha sağlıklı olur.

Cd'yi taktıktan sonra dmesg tailkomutunu verip çıktıları buraya aktarır mısınız?

heartsmagic

Bu benim verdiğim komutun çıktısı mı? Zira benim verdiğim:

dmesg | grep CD komutuydu.

Not: Sonradan ekleme varmış görmedim. grep CD yazınca alt satıra geçiyorsa CD ile ilgili bir sıkıntı olabilir.

Ayrıca sistemin güncel mi?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

blackadder

#5
guncel surekli guncelliyourm dunde guncelledim ama bulamadım cd yi
grep cd yazınca alt satıra gecip bekliyor.
xp de sorunsuz calısıyor okuyor yazıyor.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 14 Nisan 2010 - 20:32:21

dmesg tail komutunu yazacagım quote etiketini nasıl yapacagım bulamadım


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 14 Nisan 2010 - 20:37:26

birde sunu soyleyeyim xp de ubuntu da aynı hdd de kurulu laptopa kurdum

eribol

Resimde ki simgeye tıklarsan quote etiketini oluşturur. Ayrıca dmesg | grep cdkomutunu kopyala yapıştır yap terminale.

heartsmagic

cd'den ziyade bence CD kullanalım. Zira bu aygıtlar büyük harflerle geçiyorlar dmesg çıktısında.
dmesg | grep CD

Bir de şu çıktıları alsak:
ls -l /dev/sr*
ls -l /dev/scd*
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

blackadder

#8
dmesg | grep CD

[    0.813924] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-820S  1.00 PQ: 0 ANSI: 5
[    0.824200] Uniform CD-ROM `sürücü` Revision: 3.20
[    0.824332] sr 1:0:0:0: Attached scsi CD-ROM sr0


ls -l /dev/sr*


brw-rw----+ 1 root cdrom 11, 0 2010-04-17 19:00 /dev/sr0



ls -l /dev/scd*

lrwxrwxrwx 1 root root 3 2010-04-17 19:00 /dev/scd0 -> sr0




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 17 Nisan 2010 - 18:01:27


Bir de su yada sudo yazıyorum parolayı da oturumu açtım parolayı giriyorum kabul etmiyor. Başka bir parola mı oluşturdum acaba?


Sherlock Holmes

CD'yi taktıktan sonra;
sudo mount /dev/sr0
veyahutta
sudo mount /dev/scd0
komutlar ikisinin aynı veya farklı etkisinin olup olmadığını bize bildirebilirmisiniz.?

localhost

Ubuntu 10.04`te bazi bilgisayarlarda nedenini anlamadigim (gvsf-mount) hatasi veriyor. Bu hatadan sonra sisteme hic birsey baglanmiyor. Sizde de sistem acildiginda bu hatayi aliyorsaniz. CD nin baglanmama sebebi olabilir.
Linux LPIC1 - MCSA

blackadder

bende acılısta hiç bir hata cıkmıyor
simdilik sadece bu sorunum var



sudo mount /dev/sr0

mount: /dev/sr0  /etc/fstab ya da /etc/mtab içinde bulunamıyor


sudo mount /dev/scd0

mount: /dev/scd0  /etc/fstab ya da /etc/mtab içinde bulunamıyor

ODİN

bende de masa üstü pc de 2 CD room vardı ikisini de görmüyordu 9.04'te, sisteminizde kaç tane CD room sürücüsü var acaba.
Kişi, ışığını karartmayı da bilmelidir, böceklerden ve hayranlardan kurtulmak için.

blackadder


heartsmagic

@blackladder, şöyle bir deneyelim:

sudo mkdir /media/cd
sudo mount /dev/sr0 /media/cd
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

Sherlock Holmes

sudo gedit /etc/fstab
içeriğinde CD-Romunuz eklenmiş vaziyete'mi.?
Buraya aktarırmısnız.?
:)