Airties ( Air 2410 300 Mbps Broadcom ubuntu sürücü problemi )

[eribol]

rt2870sta bu modül kablosuz için. Acaba sistemde başka wireless donanım var mı? Ayrıca usb portuna takınca sistem herhangi bir tepki veriyor mu?

[lyalcin06]

Daha sonra da

Kod Seç Genişlet

ndiswrapper -l

yüklü olup olmadığı hakkında bize bilgi verebilir.

Kod Seç Genişlet


levent@levent-desktop:~$ ndiswrapper -l
Error: ndiswrapper-utils-1.9 not installed!
levent@levent-desktop:~$


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Mart 2010 - 16:18:53

rt2870sta bu modül kablosuz için. Acaba sistemde başka wireless donanım var mı? Ayrıca usb portuna takınca sistem herhangi bir tepki veriyor mu?

Denemek için edimax ew-7711Usn kablosuz usb adapter aldım linux desteginin oldugunu int araştırdım bilgisayarıma taktıgımda buldu ve kablosuz aktif hale geldi ve kablosuz int baglanabildim.

air 2410 taktıgımda hiç bir tepki vermiyor aparatda ise herhangi bir ışık yanmıyor.
fakat  lsusb komutu ile  bu takılı oldgunu gösteren bir işaret degilmi?

Kod Seç Genişlet

levent@levent-desktop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 0a5c:bd13 Broadcom Corp.
Bus 001 Device 004: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stick
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[ebubekirs]

Aygıtı tanıtabilmeniz için gerekli olan araç sisteminizde yüklü değil.

Kod Seç Genişlet

sudo apt-get install ndiswrapper-utils-1.9

Yükledikten sonra heartsmagic'in mesajında belirttiklerini uygulayın.

[lyalcin06]

ilginize çok teşekkür ederim. calştı şu an kablosuzla baglandım.
yardımcı olacagını düşündügüm uygulamayı size anlatayım
şimdi en başta masaüstündekeyken ubuntu 9.10 için   
UYGULAMALAR BASIYORUZ UBUNTU YAZILIM MERKEZİNE BASIYORUZ SOL TARAFTAKİ MENÜDEN ÜCRETSİZ YAZILIM AL İŞARETLİYORUZ SONRA SİSTEM ARAÇLARI GİRİYORUZ SAĞ ÜST TARAFDA ARAMA YERİ VAR ORAYA   ''  driver '' yazıyoruz
ekrana çıkan uygulamarın arasında  Windows Kablosuz Sürücüler Diye bi uygulamasını bulun üstüne tıklayın ve sag tarafdaki ok işaretine basın sonra web sitesi ve kur secenegi gelecek kur a basıyoruz ve bekliyoruz kurdukdan sonra wireless aparatı takıyoruz ve yukardan Sistem Yönetimde Windows Kablosuz Sürücüler göreceksiniz tıklayın ve açın sonra taktıgımız aparatın windows driverlerini masaüstüne inf. olarak atıyoruz ve programı açıyoruz acılan pencerede  install new driver basıyoruz ve ordan inf dosyasını nerdeyse orayı gösteriytoruz ve tamama basıyoruz sonra sizde anlayacaksınızki çalışıyorz AİRTİES 2410 Yaptım Şuan Kullanıyorum Hiç bi Sıkıntıda yok Teşekkürler..

[heartsmagic]

Ev dizinin /home/kullanıcı adındır. Yerler menüsünden ulaşabilirsin. Ancak masaüstüne koymuşsan orada dene:

Kod Seç Genişlet

cd ~/Masaüstü
ndiswrapper -i falanca.inf

[Gopca]

Kod Seç Genişlet

emre_@emre-PC:~/Masaüstü/airties/xp$ ndiswrapper -i bcmwlhigh5.inf
couldn't create /etc/ndiswrapper/bcmwlhigh5: Erişim engellendi at /usr/sbin/ndiswrapper-1.9 line 194.
emre_@emre-PC:~/Masaüstü/airties/xp$


aynı cihazı bende kullanıyorum ve ndiswrapper yükleme komutu hata bilgisi yukarıdaki gibi...



lsusb çıktısı

Kod Seç Genişlet

emre_@emre-PC:~/Masaüstü/airties/xp$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 04d9:a018 Holtek Semiconductor, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 Webcam
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0a5c:bd13 Broadcom Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


emre_@emre-PC:~/Masaüstü/airties/xp$ lspci
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX] (rev a2)
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 Multimedia audio controller: Creative Labs SB X-Fi
06:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
emre_@emre-PC:~/Masaüstü/airties/xp$





buda demsg çıktısı biraz uzun alabildiğimi aldım...

Kod Seç Genişlet

emre_@emre-PC:~/Masaüstü/airties/xp$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 04d9:a018 Holtek Semiconductor, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 Webcam
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0a5c:bd13 Broadcom Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


emre_@emre-PC:~/Masaüstü/airties/xp$ lspci
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX] (rev a2)
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 Multimedia audio controller: Creative Labs SB X-Fi
06:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
emre_@emre-PC:~/Masaüstü/airties/xp$






Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 28 Ocak 2011 - 20:24:57

Kod Seç Genişlet

[    0.685373] PCI: pci_cache_line_size set to 64 bytes
[    0.685373] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.685373] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[    0.685373] NetLabel: Initializing
[    0.685373] NetLabel:  domain hash size = 128
[    0.685373] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.685373] NetLabel:  unlabeled traffic allowed by default
[    0.685373] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.685373] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.685373] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.710223] Switching to clocksource tsc
[    0.718485] AppArmor: AppArmor Filesystem Enabled
[    0.718501] pnp: PnP ACPI init
[    0.718520] ACPI: bus type pnp registered
[    0.720947] pnp: PnP ACPI: found 13 devices
[    0.720949] ACPI: ACPI bus type pnp unregistered
[    0.720959] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.720962] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.720964] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.720967] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.720969] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.720975] system 00:09: [io  0x0400-0x04bf] could not be reserved
[    0.720980] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.720985] system 00:0b: [mem 0x000cd200-0x000cffff] has been reserved
[    0.720988] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.720990] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.720992] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.720995] system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.720997] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.721000] system 00:0b: [mem 0x00100000-0xcfedffff] could not be reserved
[    0.721002] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.721005] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.721007] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.721012] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.721015] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.721017] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.721020] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[    0.726847] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2200000-0xf23fffff]
[    0.726851] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.726854] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.726857] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf2800000-0xf29fffff pref]
[    0.726860] pci 0000:01:00.0: BAR 6: assigned [mem 0xef000000-0xef01ffff pref]
[    0.726863] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.726866] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.726869] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xefffffff]
[    0.726872] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.726876] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[    0.726878] pci 0000:00:06.0:   bridge window [io  0x8000-0x8fff]
[    0.726882] pci 0000:00:06.0:   bridge window [mem disabled]
[    0.726884] pci 0000:00:06.0:   bridge window [mem pref disabled]
[    0.726889] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.726892] pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
[    0.726896] pci 0000:00:1c.0:   bridge window [mem 0xf2200000-0xf23fffff]
[    0.726900] pci 0000:00:1c.0:   bridge window [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.726906] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.726909] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    0.726913] pci 0000:00:1c.3:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.726917] pci 0000:00:1c.3:   bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.726923] pci 0000:05:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
[    0.726925] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[    0.726928] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.726932] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.726936] pci 0000:00:1c.5:   bridge window [mem 0xf2800000-0xf29fffff pref]
[    0.726942] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.726944] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.726949] pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xebffffff]
[    0.726952] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.726962]   alloc irq_desc for 16 on node -1
[    0.726964]   alloc kstat_irqs on node -1
[    0.726969] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.726973] pci 0000:00:01.0: setting latency timer to 64
[    0.726978] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.726980] pci 0000:00:06.0: setting latency timer to 64
[    0.726988] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.726991] pci 0000:00:1c.0: setting latency timer to 64
[    0.726998]   alloc irq_desc for 19 on node -1
[    0.726999]   alloc kstat_irqs on node -1
[    0.727002] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.727006] pci 0000:00:1c.3: setting latency timer to 64
[    0.727013]   alloc irq_desc for 17 on node -1
[    0.727014]   alloc kstat_irqs on node -1
[    0.727017] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.727021] pci 0000:00:1c.5: setting latency timer to 64
[    0.727027] pci 0000:00:1e.0: setting latency timer to 64
[    0.727030] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.727032] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.727034] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.727036] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.727038] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.727040] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.727042] pci_bus 0000:01: resource 1 [mem 0xec000000-0xefffffff]
[    0.727044] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.727046] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.727048] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.727050] pci_bus 0000:03: resource 1 [mem 0xf2200000-0xf23fffff]
[    0.727053] pci_bus 0000:03: resource 2 [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.727055] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.727057] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf20fffff]
[    0.727059] pci_bus 0000:04: resource 2 [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.727061] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.727063] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.727065] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf29fffff pref]
[    0.727067] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.727069] pci_bus 0000:06: resource 1 [mem 0xe4000000-0xebffffff]
[    0.727071] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.727073] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.727075] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.727077] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[    0.727079] pci_bus 0000:06: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.727109] NET: Registered protocol family 2
[    0.727334] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.728739] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.732774] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.733288] TCP: Hash tables configured (established 524288 bind 65536)
[    0.733291] TCP reno registered
[    0.733306] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.733386] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.733552] NET: Registered protocol family 1
[    0.733728] pci 0000:01:00.0: Boot video device
[    0.733746] PCI: CLS 32 bytes, default 64
[    0.733748] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.733750] Placing 64MB software IO TLB between ffff880001f9e000 - ffff880005f9e000
[    0.733752] software IO TLB at phys 0x1f9e000 - 0x5f9e000
[    0.734037] Scanning for low memory corruption every 60 seconds
[    0.734190] audit: initializing netlink socket (disabled)
[    0.734199] type=2000 audit(1296237556.720:1): initialized
[    0.747423] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.748727] VFS: Disk quotas dquot_6.5.2
[    0.748778] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.749273] fuse init (API version 7.14)
[    0.749346] msgmni has been set to 11934
[    0.749641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.749644] io scheduler noop registered
[    0.749646] io scheduler deadline registered
[    0.749677] io scheduler cfq registered (default)
[    0.749784] pcieport 0000:00:01.0: setting latency timer to 64
[    0.749806]   alloc irq_desc for 40 on node -1
[    0.749808]   alloc kstat_irqs on node -1
[    0.749817] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.749862] pcieport 0000:00:06.0: setting latency timer to 64
[    0.749881]   alloc irq_desc for 41 on node -1
[    0.749882]   alloc kstat_irqs on node -1
[    0.749887] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    0.749937] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.749965]   alloc irq_desc for 42 on node -1
[    0.749966]   alloc kstat_irqs on node -1
[    0.749972] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[    0.750043] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.750070]   alloc irq_desc for 43 on node -1
[    0.750072]   alloc kstat_irqs on node -1
[    0.750078] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.750147] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.750174]   alloc irq_desc for 44 on node -1
[    0.750176]   alloc kstat_irqs on node -1
[    0.750182] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[    0.750267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.750346] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.750418] intel_idle: MWAIT substates: 0x20
[    0.750420] intel_idle: does not run on family 6 model 15
[    0.750509] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.750514] ACPI: Power Button [PWRB]
[    0.750562] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.750565] ACPI: Power Button [PWRF]
[    0.750785] ACPI: acpi_idle registered with cpuidle
[    0.753068] ERST: Table is not found!
[    0.753284] Linux agpgart interface v0.103
[    0.753311] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.753410] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.753688] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.754653] brd: module loaded
[    0.755071] loop: module loaded
[    0.755227] ata_piix 0000:00:1f.2: version 2.13
[    0.755242] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.755246] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.755284] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.755368] scsi0 : ata_piix
[    0.755434] scsi1 : ata_piix
[    0.756026] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.756032] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.756061] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.756066] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.756119] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.756172] scsi2 : ata_piix
[    0.756219] scsi3 : ata_piix
[    0.756718] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[    0.756722] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[    0.756788] pata_acpi 0000:04:00.1: enabling device (0000 -> 0001)
[    0.756793] pata_acpi 0000:04:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.756819] pata_acpi 0000:04:00.1: setting latency timer to 64
[    0.756832] pata_acpi 0000:04:00.1: PCI INT B disabled
[    0.757074] Fixed MDIO Bus: probed
[    0.757101] PPP generic driver version 2.4.2
[    0.757139] tun: Universal TUN/TAP device driver, 1.6
[    0.757140] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.757214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.757229]   alloc irq_desc for 18 on node -1
[    0.757230]   alloc kstat_irqs on node -1
[    0.757235] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.757256] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.757259] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.757295] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.761213] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.761225] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf2101000
[    0.779819] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.779911] hub 1-0:1.0: USB hub found
[    0.779916] hub 1-0:1.0: 6 ports detected
[    0.779982]   alloc irq_desc for 23 on node -1
[    0.779983]   alloc kstat_irqs on node -1
[    0.779987] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.779997] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.780000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.780032] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.783918] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.783929] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2100000
[    0.799840] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.799920] hub 2-0:1.0: USB hub found
[    0.799923] hub 2-0:1.0: 6 ports detected
[    0.799981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.799993] uhci_hcd: USB Universal Host Controller Interface driver
[    0.800037] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.800042] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.800044] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.800071] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.800102] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[    0.800200] hub 3-0:1.0: USB hub found
[    0.800203] hub 3-0:1.0: 2 ports detected
[    0.800252]   alloc irq_desc for 21 on node -1
[    0.800254]   alloc kstat_irqs on node -1
[    0.800258] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.800263] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.800266] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.800296] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.800324] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[    0.800423] hub 4-0:1.0: USB hub found
[    0.800427] hub 4-0:1.0: 2 ports detected
[    0.800480] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.800485] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.800488] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.800513] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.800536] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
[    0.800630] hub 5-0:1.0: USB hub found
[    0.800634] hub 5-0:1.0: 2 ports detected
[    0.800685] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.800690] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.800693] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.800720] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.800741] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
[    0.800839] hub 6-0:1.0: USB hub found
[    0.800842] hub 6-0:1.0: 2 ports detected
[    0.800891] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.800896] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.800899] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.800934] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.800955] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
[    0.801049] hub 7-0:1.0: USB hub found
[    0.801052] hub 7-0:1.0: 2 ports detected
[    0.801103] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.801108] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.801111] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.801137] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.801159] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[    0.801252] hub 8-0:1.0: USB hub found
[    0.801256] hub 8-0:1.0: 2 ports detected
[    0.801355] PNP: No PS/2 controller found. Probing ports directly.
[    0.801701] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.801706] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.801757] mice: PS/2 mouse device common for all mice
[    0.801847] rtc_cmos 00:04: RTC can wake from S4
[    0.801883] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.801905] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.801984] device-mapper: uevent: version 1.0.3
[    0.802046] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.802134] device-mapper: multipath: version 1.1.1 loaded
[    0.802137] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.802321] cpuidle: using governor ladder
[    0.802323] cpuidle: using governor menu
[    0.802539] TCP cubic registered
[    0.802642] NET: Registered protocol family 10
[    0.802933] lo: Disabled Privacy Extensions
[    0.803099] NET: Registered protocol family 17
[    0.807434] PM: Resume from disk failed.
[    0.807448] registered taskstats version 1
[    0.807755]   Magic number: 11:319:998
[    0.807794] pnp 00:00: hash matches
[    0.807843] rtc_cmos 00:04: setting system clock to 2011-01-28 17:59:17 UTC (1296237557)
[    0.807846] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.807847] EDD information not available.
[    0.877634] Freeing initrd memory: 10992k freed
[    1.100728] ata4: SATA link down (SStatus 0 SControl 300)
[    1.102519] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.270061] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.290718] ata3.00: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133
[    1.290723] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.310745] ata3.00: configured for UDMA/133
[    1.602570] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.602585] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.602597] ata2.01: link offline, clearing class 3 to NONE
[    1.610085] ata1.00: SATA link down (SStatus 0 SControl 300)
[    1.610099] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.620877] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
[    1.660158] ata2.00: configured for UDMA/100
[    1.660245] ata1.01: HPA unlocked: 488395055 -> 488397168, native 488397168
[    1.660248] ata1.01: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.660251] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.700273] ata1.01: configured for UDMA/133
[    1.700406] scsi 0:0:1:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    1.700563] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    1.700593] sd 0:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.700643] sd 0:0:1:0: [sda] Write Protect is off
[    1.700646] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.700703] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.700908]  sda:
[    1.701383] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203B  SB04 PQ: 0 ANSI: 5
[    1.705625] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.705629] Uniform CD-ROM driver Revision: 3.20
[    1.705744] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.705796] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.705891] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5001AALS-0 01.0 PQ: 0 ANSI: 5
[    1.705986] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.705993] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.706043] sd 2:0:0:0: [sdb] Write Protect is off
[    1.706046] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.706070] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.706214]  sdb: sda1 sda2
[    1.707770] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.720902]  sdb1 < sdb5 > sdb2 sdb3
[    1.722834] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.722852] Freeing unused kernel memory: 908k freed
[    1.723023] Write protecting the kernel read-only data: 10240k
[    1.723211] Freeing unused kernel memory: 412k freed
[    1.723430] Freeing unused kernel memory: 1644k freed
[    1.738036] udev[106]: starting version 163
[    1.767608] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.767642] pata_jmicron 0000:04:00.1: setting latency timer to 64
[    1.779497] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.779518] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.779572] r8169 0000:05:00.0: setting latency timer to 64
[    1.779627]   alloc irq_desc for 45 on node -1
[    1.779629]   alloc kstat_irqs on node -1
[    1.779644] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[    1.779664] firewire_ohci 0000:06:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.779737] scsi4 : pata_jmicron
[    1.780065] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc900057fe000, 00:1a:4d:5e:63:b3, XID 18000000 IRQ 45
[    1.785075] scsi5 : pata_jmicron
[    1.785783] ata5: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
[    1.785786] ata6: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
[    1.786349] ahci 0000:04:00.0: version 3.0
[    1.786368] ahci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.791500] xor: automatically using best checksumming function: generic_sse
[    1.802551] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.802555] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.802562] ahci 0000:04:00.0: setting latency timer to 64
[    1.804145] scsi6 : ahci
[    1.804264] scsi7 : ahci
[    1.804388] ata7: SATA max UDMA/133 abar m8192@0xf2000000 port 0xf2000100 irq 19
[    1.804392] ata8: SATA max UDMA/133 abar m8192@0xf2000000 port 0xf2000180 irq 19
[    1.832534]    generic_sse:  8933.200 MB/sec
[    1.832536] xor: using function: generic_sse (8933.200 MB/sec)
[    1.832548] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    1.840079] firewire_ohci: Added fw-ohci device 0000:06:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    2.151290] ata8: SATA link down (SStatus 0 SControl 300)
[    2.152550] ata7: SATA link down (SStatus 0 SControl 300)
[    2.174862] device-mapper: dm-raid45: initialized v0.2594b
[    2.290041] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    2.332698] firewire_core: created device fw0: GUID 00ce070200001a4d, S400
[    2.339061] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[    2.339065] EXT4-fs (sdb2): write access will be enabled during recovery
[    2.770072] usb 5-2: new low speed USB device using uhci_hcd and address 2
[    2.966814] usbcore: registered new interface driver hiddev
[    2.981292] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2
[    2.981381] generic-usb 0003:04D9:A018.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:1a.2-2/input0
[    3.009369] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3
[    3.009474] generic-usb 0003:04D9:A018.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:1a.2-2/input1
[    3.009493] usbcore: registered new interface driver usbhid
[    3.009495] usbhid: USB HID core driver
[    3.723657] EXT4-fs (sdb2): orphan cleanup on readonly fs
[    3.723665] EXT4-fs (sdb2): ext4_orphan_cleanup: deleting unreferenced inode 4718649
[    3.723719] EXT4-fs (sdb2): 1 orphan inode deleted
[    3.723722] EXT4-fs (sdb2): recovery complete
[    3.955854] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    5.525670] Adding 9764860k swap on /dev/sdb5.  Priority:-1 extents:1 across:9764860k
[    6.056574] udev[423]: starting version 163
[    6.601508] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[    7.006861] parport_pc 00:08: reported by Plug and Play ACPI
[    7.006909] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    7.302224] lp0: using parport0 (interrupt-driven).
[    7.365423] ppdev: user-space parallel port driver
[    7.509656] Linux video capture interface: v2.00
[    7.548677] EDAC MC: Ver: 2.1.0 Jan 21 2011
[    7.659898] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[    7.730504] flexcop-pci: will use the HW PID filter.
[    7.730508] flexcop-pci: card revision 2
[    7.730517] b2c2_flexcop_pci 0000:06:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    7.730582] ------------[ cut here ]------------
[    7.730588] WARNING: at /build/buildd/linux-2.6.35/fs/proc/generic.c:317 __xlate_proc_name+0xcd/0xf0()
[    7.730590] Hardware name: X38-DS4
[    7.730592] name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver'
[    7.730593] Modules linked in: b2c2_flexcop_pci(+) b2c2_flexcop dvb_core cx24123 cx24113 ir_core edac_core psmouse videodev v4l1_compat v4l2_compat_ioctl32 snd soundcore snd_page_alloc s5h1420 ppdev lp serio_raw parport_pc parport usbhid hid dm_raid45 xor ahci firewire_ohci r8169 firewire_core mii crc_itu_t pata_jmicron libahci
[    7.730614] Pid: 734, comm: modprobe Not tainted 2.6.35-25-generic #44-Ubuntu
[    7.730616] Call Trace:
[    7.730622]  [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0
[    7.730625]  [<ffffffff81060a16>] warn_slowpath_fmt+0x46/0x50
[    7.730628]  [<ffffffff811b05ad>] __xlate_proc_name+0xcd/0xf0
[    7.730631]  [<ffffffff811b13d4>] __proc_create+0x74/0x150
[    7.730634]  [<ffffffff811b16ce>] proc_mkdir_mode+0x2e/0x60
[    7.730636]  [<ffffffff811b1716>] proc_mkdir+0x16/0x20
[    7.730640]  [<ffffffff810cdbcb>] register_handler_proc+0x11b/0x140
[    7.730644]  [<ffffffff810cadb1>] __setup_irq+0x1e1/0x340
[    7.730647]  [<ffffffff81143564>] ? kmem_cache_alloc_notrace+0xb4/0xd0
[    7.730651]  [<ffffffffa01892d0>] ? flexcop_pci_isr+0x0/0x190 [b2c2_flexcop_pci]
[    7.730654]  [<ffffffff810cb85c>] request_threaded_irq+0x10c/0x1e0
[    7.730658]  [<ffffffffa018925d>] flexcop_pci_init+0xcd/0x140 [b2c2_flexcop_pci]
[    7.730661]  [<ffffffffa018952f>] flexcop_pci_probe+0xcf/0x250 [b2c2_flexcop_pci]
[    7.730666]  [<ffffffff812d7717>] local_pci_probe+0x17/0x20
[    7.730669]  [<ffffffff812d7a09>] __pci_device_probe+0xe9/0xf0
[    7.730673]  [<ffffffff812b9d4a>] ? kobject_get+0x1a/0x30
[    7.730677]  [<ffffffff813847d9>] ? get_device+0x19/0x20
[    7.730680]  [<ffffffff812d8aaa>] pci_device_probe+0x3a/0x60
[    7.730683]  [<ffffffff81388b98>] really_probe+0x68/0x190
[    7.730686]  [<ffffffff81388d05>] driver_probe_device+0x45/0x70
[    7.730688]  [<ffffffff81388dcb>] __driver_attach+0x9b/0xa0
[    7.730691]  [<ffffffff81388d30>] ? __driver_attach+0x0/0xa0
[    7.730693]  [<ffffffff81387fd8>] bus_for_each_dev+0x68/0x90
[    7.730696]  [<ffffffff81388a0e>] driver_attach+0x1e/0x20
[    7.730698]  [<ffffffff813882ce>] bus_add_driver+0xde/0x280
[    7.730701]  [<ffffffff81389110>] driver_register+0x80/0x150
[    7.730705]  [<ffffffff8158e7b6>] ? notifier_call_chain+0x56/0x80
[    7.730708]  [<ffffffff812d8d36>] __pci_register_driver+0x56/0xd0
[    7.730712]  [<ffffffff810850f5>] ? __blocking_notifier_call_chain+0x65/0x80
[    7.730715]  [<ffffffffa018d000>] ? flexcop_pci_module_init+0x0/0x20 [b2c2_flexcop_pci]
[    7.730720]  [<ffffffffa018d01e>] flexcop_pci_module_init+0x1e/0x20 [b2c2_flexcop_pci]
[    7.730724]  [<ffffffff8100204c>] do_one_initcall+0x3c/0x1a0
[    7.730727]  [<ffffffff8109bd7b>] sys_init_module+0xbb/0x200
[    7.730731]  [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[    7.730733] ---[ end trace c5344bf710d8d08a ]---
[    7.761452] DVB: registering new adapter (FlexCop Digital TV device)
[    7.762773] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0
[    7.763202] b2c2-flexcop: MAC address = 00:d0:d7:14:04:dc
[    7.764032] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[    7.764070] CX24123: wrong demod revision: 87
[    7.792987] gspca: main v2.9.0 registered
[    7.815121] IR NEC protocol handler initialized
[    8.046071] type=1400 audit(1296237564.729:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=621 comm="apparmor_parser"
[    8.046086] type=1400 audit(1296237564.729:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=622 comm="apparmor_parser"
[    8.046693] type=1400 audit(1296237564.729:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=621 comm="apparmor_parser"
[    8.046706] type=1400 audit(1296237564.729:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=622 comm="apparmor_parser"
[    8.047014] type=1400 audit(1296237564.729:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=621 comm="apparmor_parser"
[    8.047031] type=1400 audit(1296237564.729:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=622 comm="apparmor_parser"
[    8.058776] IR RC5(x) protocol handler initialized
[    8.058855] gspca: probing 0ac8:303b
[    8.115138] IR RC6 protocol handler initialized
[    8.145649] IR JVC protocol handler initialized
[    8.151384] Registered IR keymap rc-rc6-mce
[    8.151501] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/virtual/rc/rc0/input4
[    8.151554] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/virtual/rc/rc0
[    8.151579] mceusb 3-2:1.0: Registered Philips eHome Infrared Transceiver on usb3:2
[    8.151602] usbcore: registered new interface driver mceusb
[    8.152273] IR Sony protocol handler initialized
[    8.217374] lirc_dev: IR Remote Control driver registered, major 249
[    8.259651] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[    8.259655] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[    8.259714] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[    8.260038] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[    8.260041] IR LIRC bridge handler initialized
[    8.417567] zc3xx: probe sensor -> 000a
[    8.417571] zc3xx: Find Sensor PB0330. Chip revision 0
[    8.419644] input: zc3xx as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/input/input5
[    8.419752] gspca: video0 created
[    8.419755] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
[    8.419788] usbcore: registered new interface driver zc3xx
[    8.419790] zc3xx: registered
[    8.639873]   alloc irq_desc for 20 on node -1
[    8.639876]   alloc kstat_irqs on node -1
[    8.639883] SB-XFi 0000:06:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    9.025871] nvidia: module license 'NVIDIA' taints kernel.
[    9.025875] Disabling lock debugging due to kernel taint
[    9.442314] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.442322] nvidia 0000:01:00.0: setting latency timer to 64
[    9.442331] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    9.442587] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.28  Wed Sep 29 09:44:58 PDT 2010
[   10.390488] type=1400 audit(1296237567.069:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=974 comm="apparmor_parser"
[   10.391091] type=1400 audit(1296237567.069:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=974 comm="apparmor_parser"
[   10.391427] type=1400 audit(1296237567.069:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=974 comm="apparmor_parser"
[   10.480588] type=1400 audit(1296237567.169:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=973 comm="apparmor_parser"
[   11.142270] r8169 0000:05:00.0: eth0: link down
[   11.142279] r8169 0000:05:00.0: eth0: link down
[   11.143142] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.762137] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[   18.166097] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[   19.178841] r8169 0000:05:00.0: eth0: link up
[   19.179720] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   29.472558] eth0: no IPv6 routers present
[  623.481277] usb 2-2: new high speed USB device using ehci_hcd and address 2
[  623.697066] Initializing USB Mass Storage driver...
[  623.697292] scsi8 : usb-storage 2-2:1.0
[  623.697625] usbcore: registered new interface driver usb-storage
[  623.697628] USB Mass Storage support registered.
[  624.696609] scsi 8:0:0:0: Direct-Access     ChipsBnk SD/MMCReader     4081 PQ: 0 ANSI: 2
[  624.697224] sd 8:0:0:0: Attached scsi generic sg3 type 0
[  624.698599] sd 8:0:0:0: [sdc] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB)
[  624.699084] sd 8:0:0:0: [sdc] Write Protect is off
[  624.699089] sd 8:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[  624.699092] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  624.701210] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  624.701217]  sdc:
[  624.703468] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  624.703473] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[  647.544499] usb 2-2: USB disconnect, address 2
[ 1253.767230] show_signal_msg: 24 callbacks suppressed
[ 1253.767236] npviewer.bin[5074]: segfault at 418 ip 00000000f6059c86 sp 00000000ff828528 error 6 in libflashplayer.so[f5e0a000+b2e000]
emre_@emre-PC:~/Masaüstü/airties/xp$



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 28 Ocak 2011 - 22:18:07
ndiswrapper ile yorucuda olsa kurmayı başardım ama şimdide kablosuz ağıma bağlanamıyorum? ikidebir şifre istiyor giriyorum bir daha istiyor. wicd kurdum onunla denedim şifreyi doğru değil diyip duruyor...

şifreyi doğru giriyorum hatta modeme girip şifreyi kontrol ettim kopyala yapıştır yaptım ama yine aynısını dedi..

Şifreleme türü WPA (wpa2 yada wep değil yalnızca wpa seçili malum komşumun laptop biraz eski onun wireless kartı yalnız wpa destekliyor.)


Not: Wireless adaptörüm: Airties 2410 ve Modemim Airties 5450
Not2 : Laptopumla sorunsuzca bağlantı kurabiliyorum ama ndiswrapper ile yüklediğim xp64bit sürüsü ile çevremdeki tüm ağları görebiliyorum ama bağlantı kuramıyorum.

[heartsmagic]

@Gopca, uzun çıktılarını, hatta tüm çıktılarını kod etiketi içinde verirsen seviniriz.

Geçici bir süre olsa da şifresiz ya da sadece Wep ile deneme imkânın var mı bağlantıyı?

[lyalcin06]

merhaba ,,

uygulama yazılım merkesinden acıp windows kablosuz sunucular yükleyerek arities windows xp pro sürücüsünü yükle denedinmi
bcmwlhigh6.inf eklersen sorun çözülecek büyük ihtimalle dün 3 adet tanıttım air 2410 300 MBPS den ubuntu 10.04 e

Kod Seç Genişlet

emre_@emre-PC:~/Masaüstü/airties/xp$ ndiswrapper -i bcmwlhigh5.inf
couldn't create /etc/ndiswrapper/bcmwlhigh5: Erişim engellendi at /usr/sbin/ndiswrapper-1.9 line 194.
emre_@emre-PC:~/Masaüstü/airties/xp$

uygulama yazılım merkesinden acıp windows kablosuz sunucular yükleyerek arities windows xp pro sürücüsünü yükle denedinmi


aynı cihazı bende kullanıyorum ve ndiswrapper yükleme komutu hata bilgisi yukarıdaki gibi...



lsusb çıktısı

Kod Seç Genişlet

emre_@emre-PC:~/Masaüstü/airties/xp$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 04d9:a018 Holtek Semiconductor, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 Webcam
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0a5c:bd13 Broadcom Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


emre_@emre-PC:~/Masaüstü/airties/xp$ lspci
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX] (rev a2)
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 Multimedia audio controller: Creative Labs SB X-Fi
06:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
emre_@emre-PC:~/Masaüstü/airties/xp$





buda demsg çıktısı biraz uzun alabildiğimi aldım...

Kod Seç Genişlet

emre_@emre-PC:~/Masaüstü/airties/xp$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 04d9:a018 Holtek Semiconductor, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 Webcam
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0a5c:bd13 Broadcom Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


emre_@emre-PC:~/Masaüstü/airties/xp$ lspci
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX] (rev a2)
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 Multimedia audio controller: Creative Labs SB X-Fi
06:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
emre_@emre-PC:~/Masaüstü/airties/xp$






Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 28 Ocak 2011 - 20:24:57

Kod Seç Genişlet

[    0.685373] PCI: pci_cache_line_size set to 64 bytes
[    0.685373] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.685373] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[    0.685373] NetLabel: Initializing
[    0.685373] NetLabel:  domain hash size = 128
[    0.685373] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.685373] NetLabel:  unlabeled traffic allowed by default
[    0.685373] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.685373] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.685373] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.710223] Switching to clocksource tsc
[    0.718485] AppArmor: AppArmor Filesystem Enabled
[    0.718501] pnp: PnP ACPI init
[    0.718520] ACPI: bus type pnp registered
[    0.720947] pnp: PnP ACPI: found 13 devices
[    0.720949] ACPI: ACPI bus type pnp unregistered
[    0.720959] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.720962] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.720964] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.720967] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.720969] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.720975] system 00:09: [io  0x0400-0x04bf] could not be reserved
[    0.720980] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.720985] system 00:0b: [mem 0x000cd200-0x000cffff] has been reserved
[    0.720988] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.720990] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.720992] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.720995] system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.720997] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.721000] system 00:0b: [mem 0x00100000-0xcfedffff] could not be reserved
[    0.721002] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.721005] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.721007] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.721012] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.721015] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.721017] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.721020] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[    0.726847] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2200000-0xf23fffff]
[    0.726851] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.726854] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.726857] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf2800000-0xf29fffff pref]
[    0.726860] pci 0000:01:00.0: BAR 6: assigned [mem 0xef000000-0xef01ffff pref]
[    0.726863] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.726866] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.726869] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xefffffff]
[    0.726872] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.726876] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[    0.726878] pci 0000:00:06.0:   bridge window [io  0x8000-0x8fff]
[    0.726882] pci 0000:00:06.0:   bridge window [mem disabled]
[    0.726884] pci 0000:00:06.0:   bridge window [mem pref disabled]
[    0.726889] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.726892] pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
[    0.726896] pci 0000:00:1c.0:   bridge window [mem 0xf2200000-0xf23fffff]
[    0.726900] pci 0000:00:1c.0:   bridge window [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.726906] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.726909] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    0.726913] pci 0000:00:1c.3:   bridge window [mem 0xf2000000-0xf20fffff]
[    0.726917] pci 0000:00:1c.3:   bridge window [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.726923] pci 0000:05:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
[    0.726925] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[    0.726928] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.726932] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.726936] pci 0000:00:1c.5:   bridge window [mem 0xf2800000-0xf29fffff pref]
[    0.726942] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.726944] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.726949] pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xebffffff]
[    0.726952] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.726962]   alloc irq_desc for 16 on node -1
[    0.726964]   alloc kstat_irqs on node -1
[    0.726969] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.726973] pci 0000:00:01.0: setting latency timer to 64
[    0.726978] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.726980] pci 0000:00:06.0: setting latency timer to 64
[    0.726988] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.726991] pci 0000:00:1c.0: setting latency timer to 64
[    0.726998]   alloc irq_desc for 19 on node -1
[    0.726999]   alloc kstat_irqs on node -1
[    0.727002] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.727006] pci 0000:00:1c.3: setting latency timer to 64
[    0.727013]   alloc irq_desc for 17 on node -1
[    0.727014]   alloc kstat_irqs on node -1
[    0.727017] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.727021] pci 0000:00:1c.5: setting latency timer to 64
[    0.727027] pci 0000:00:1e.0: setting latency timer to 64
[    0.727030] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.727032] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.727034] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.727036] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.727038] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.727040] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.727042] pci_bus 0000:01: resource 1 [mem 0xec000000-0xefffffff]
[    0.727044] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.727046] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.727048] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.727050] pci_bus 0000:03: resource 1 [mem 0xf2200000-0xf23fffff]
[    0.727053] pci_bus 0000:03: resource 2 [mem 0xf2400000-0xf25fffff 64bit pref]
[    0.727055] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.727057] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf20fffff]
[    0.727059] pci_bus 0000:04: resource 2 [mem 0xf2600000-0xf27fffff 64bit pref]
[    0.727061] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.727063] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.727065] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf29fffff pref]
[    0.727067] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.727069] pci_bus 0000:06: resource 1 [mem 0xe4000000-0xebffffff]
[    0.727071] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.727073] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.727075] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.727077] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[    0.727079] pci_bus 0000:06: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.727109] NET: Registered protocol family 2
[    0.727334] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.728739] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.732774] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.733288] TCP: Hash tables configured (established 524288 bind 65536)
[    0.733291] TCP reno registered
[    0.733306] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.733386] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.733552] NET: Registered protocol family 1
[    0.733728] pci 0000:01:00.0: Boot video device
[    0.733746] PCI: CLS 32 bytes, default 64
[    0.733748] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.733750] Placing 64MB software IO TLB between ffff880001f9e000 - ffff880005f9e000
[    0.733752] software IO TLB at phys 0x1f9e000 - 0x5f9e000
[    0.734037] Scanning for low memory corruption every 60 seconds
[    0.734190] audit: initializing netlink socket (disabled)
[    0.734199] type=2000 audit(1296237556.720:1): initialized
[    0.747423] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.748727] VFS: Disk quotas dquot_6.5.2
[    0.748778] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.749273] fuse init (API version 7.14)
[    0.749346] msgmni has been set to 11934
[    0.749641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.749644] io scheduler noop registered
[    0.749646] io scheduler deadline registered
[    0.749677] io scheduler cfq registered (default)
[    0.749784] pcieport 0000:00:01.0: setting latency timer to 64
[    0.749806]   alloc irq_desc for 40 on node -1
[    0.749808]   alloc kstat_irqs on node -1
[    0.749817] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.749862] pcieport 0000:00:06.0: setting latency timer to 64
[    0.749881]   alloc irq_desc for 41 on node -1
[    0.749882]   alloc kstat_irqs on node -1
[    0.749887] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    0.749937] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.749965]   alloc irq_desc for 42 on node -1
[    0.749966]   alloc kstat_irqs on node -1
[    0.749972] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[    0.750043] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.750070]   alloc irq_desc for 43 on node -1
[    0.750072]   alloc kstat_irqs on node -1
[    0.750078] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.750147] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.750174]   alloc irq_desc for 44 on node -1
[    0.750176]   alloc kstat_irqs on node -1
[    0.750182] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[    0.750267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.750346] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.750418] intel_idle: MWAIT substates: 0x20
[    0.750420] intel_idle: does not run on family 6 model 15
[    0.750509] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.750514] ACPI: Power Button [PWRB]
[    0.750562] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.750565] ACPI: Power Button [PWRF]
[    0.750785] ACPI: acpi_idle registered with cpuidle
[    0.753068] ERST: Table is not found!
[    0.753284] Linux agpgart interface v0.103
[    0.753311] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.753410] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.753688] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.754653] brd: module loaded
[    0.755071] loop: module loaded
[    0.755227] ata_piix 0000:00:1f.2: version 2.13
[    0.755242] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.755246] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.755284] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.755368] scsi0 : ata_piix
[    0.755434] scsi1 : ata_piix
[    0.756026] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.756032] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.756061] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.756066] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.756119] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.756172] scsi2 : ata_piix
[    0.756219] scsi3 : ata_piix
[    0.756718] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[    0.756722] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[    0.756788] pata_acpi 0000:04:00.1: enabling device (0000 -> 0001)
[    0.756793] pata_acpi 0000:04:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.756819] pata_acpi 0000:04:00.1: setting latency timer to 64
[    0.756832] pata_acpi 0000:04:00.1: PCI INT B disabled
[    0.757074] Fixed MDIO Bus: probed
[    0.757101] PPP generic driver version 2.4.2
[    0.757139] tun: Universal TUN/TAP device driver, 1.6
[    0.757140] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.757214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.757229]   alloc irq_desc for 18 on node -1
[    0.757230]   alloc kstat_irqs on node -1
[    0.757235] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.757256] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.757259] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.757295] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.761213] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.761225] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf2101000
[    0.779819] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.779911] hub 1-0:1.0: USB hub found
[    0.779916] hub 1-0:1.0: 6 ports detected
[    0.779982]   alloc irq_desc for 23 on node -1
[    0.779983]   alloc kstat_irqs on node -1
[    0.779987] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.779997] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.780000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.780032] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.783918] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.783929] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2100000
[    0.799840] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.799920] hub 2-0:1.0: USB hub found
[    0.799923] hub 2-0:1.0: 6 ports detected
[    0.799981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.799993] uhci_hcd: USB Universal Host Controller Interface driver
[    0.800037] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.800042] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.800044] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.800071] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.800102] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[    0.800200] hub 3-0:1.0: USB hub found
[    0.800203] hub 3-0:1.0: 2 ports detected
[    0.800252]   alloc irq_desc for 21 on node -1
[    0.800254]   alloc kstat_irqs on node -1
[    0.800258] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.800263] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.800266] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.800296] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.800324] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[    0.800423] hub 4-0:1.0: USB hub found
[    0.800427] hub 4-0:1.0: 2 ports detected
[    0.800480] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.800485] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.800488] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.800513] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.800536] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
[    0.800630] hub 5-0:1.0: USB hub found
[    0.800634] hub 5-0:1.0: 2 ports detected
[    0.800685] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.800690] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.800693] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.800720] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.800741] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
[    0.800839] hub 6-0:1.0: USB hub found
[    0.800842] hub 6-0:1.0: 2 ports detected
[    0.800891] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.800896] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.800899] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.800934] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.800955] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
[    0.801049] hub 7-0:1.0: USB hub found
[    0.801052] hub 7-0:1.0: 2 ports detected
[    0.801103] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.801108] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.801111] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.801137] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.801159] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[    0.801252] hub 8-0:1.0: USB hub found
[    0.801256] hub 8-0:1.0: 2 ports detected
[    0.801355] PNP: No PS/2 controller found. Probing ports directly.
[    0.801701] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.801706] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.801757] mice: PS/2 mouse device common for all mice
[    0.801847] rtc_cmos 00:04: RTC can wake from S4
[    0.801883] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.801905] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.801984] device-mapper: uevent: version 1.0.3
[    0.802046] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.802134] device-mapper: multipath: version 1.1.1 loaded
[    0.802137] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.802321] cpuidle: using governor ladder
[    0.802323] cpuidle: using governor menu
[    0.802539] TCP cubic registered
[    0.802642] NET: Registered protocol family 10
[    0.802933] lo: Disabled Privacy Extensions
[    0.803099] NET: Registered protocol family 17
[    0.807434] PM: Resume from disk failed.
[    0.807448] registered taskstats version 1
[    0.807755]   Magic number: 11:319:998
[    0.807794] pnp 00:00: hash matches
[    0.807843] rtc_cmos 00:04: setting system clock to 2011-01-28 17:59:17 UTC (1296237557)
[    0.807846] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.807847] EDD information not available.
[    0.877634] Freeing initrd memory: 10992k freed
[    1.100728] ata4: SATA link down (SStatus 0 SControl 300)
[    1.102519] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.270061] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.290718] ata3.00: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133
[    1.290723] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.310745] ata3.00: configured for UDMA/133
[    1.602570] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.602585] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.602597] ata2.01: link offline, clearing class 3 to NONE
[    1.610085] ata1.00: SATA link down (SStatus 0 SControl 300)
[    1.610099] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.620877] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
[    1.660158] ata2.00: configured for UDMA/100
[    1.660245] ata1.01: HPA unlocked: 488395055 -> 488397168, native 488397168
[    1.660248] ata1.01: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.660251] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.700273] ata1.01: configured for UDMA/133
[    1.700406] scsi 0:0:1:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    1.700563] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    1.700593] sd 0:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.700643] sd 0:0:1:0: [sda] Write Protect is off
[    1.700646] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.700703] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.700908]  sda:
[    1.701383] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203B  SB04 PQ: 0 ANSI: 5
[    1.705625] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.705629] Uniform CD-ROM driver Revision: 3.20
[    1.705744] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.705796] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.705891] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5001AALS-0 01.0 PQ: 0 ANSI: 5
[    1.705986] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.705993] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.706043] sd 2:0:0:0: [sdb] Write Protect is off
[    1.706046] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.706070] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.706214]  sdb: sda1 sda2
[    1.707770] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.720902]  sdb1 < sdb5 > sdb2 sdb3
[    1.722834] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.722852] Freeing unused kernel memory: 908k freed
[    1.723023] Write protecting the kernel read-only data: 10240k
[    1.723211] Freeing unused kernel memory: 412k freed
[    1.723430] Freeing unused kernel memory: 1644k freed
[    1.738036] udev[106]: starting version 163
[    1.767608] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.767642] pata_jmicron 0000:04:00.1: setting latency timer to 64
[    1.779497] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.779518] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.779572] r8169 0000:05:00.0: setting latency timer to 64
[    1.779627]   alloc irq_desc for 45 on node -1
[    1.779629]   alloc kstat_irqs on node -1
[    1.779644] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[    1.779664] firewire_ohci 0000:06:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.779737] scsi4 : pata_jmicron
[    1.780065] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc900057fe000, 00:1a:4d:5e:63:b3, XID 18000000 IRQ 45
[    1.785075] scsi5 : pata_jmicron
[    1.785783] ata5: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
[    1.785786] ata6: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
[    1.786349] ahci 0000:04:00.0: version 3.0
[    1.786368] ahci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.791500] xor: automatically using best checksumming function: generic_sse
[    1.802551] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.802555] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.802562] ahci 0000:04:00.0: setting latency timer to 64
[    1.804145] scsi6 : ahci
[    1.804264] scsi7 : ahci
[    1.804388] ata7: SATA max UDMA/133 abar m8192@0xf2000000 port 0xf2000100 irq 19
[    1.804392] ata8: SATA max UDMA/133 abar m8192@0xf2000000 port 0xf2000180 irq 19
[    1.832534]    generic_sse:  8933.200 MB/sec
[    1.832536] xor: using function: generic_sse (8933.200 MB/sec)
[    1.832548] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    1.840079] firewire_ohci: Added fw-ohci device 0000:06:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    2.151290] ata8: SATA link down (SStatus 0 SControl 300)
[    2.152550] ata7: SATA link down (SStatus 0 SControl 300)
[    2.174862] device-mapper: dm-raid45: initialized v0.2594b
[    2.290041] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    2.332698] firewire_core: created device fw0: GUID 00ce070200001a4d, S400
[    2.339061] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[    2.339065] EXT4-fs (sdb2): write access will be enabled during recovery
[    2.770072] usb 5-2: new low speed USB device using uhci_hcd and address 2
[    2.966814] usbcore: registered new interface driver hiddev
[    2.981292] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2
[    2.981381] generic-usb 0003:04D9:A018.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:1a.2-2/input0
[    3.009369] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3
[    3.009474] generic-usb 0003:04D9:A018.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:1a.2-2/input1
[    3.009493] usbcore: registered new interface driver usbhid
[    3.009495] usbhid: USB HID core driver
[    3.723657] EXT4-fs (sdb2): orphan cleanup on readonly fs
[    3.723665] EXT4-fs (sdb2): ext4_orphan_cleanup: deleting unreferenced inode 4718649
[    3.723719] EXT4-fs (sdb2): 1 orphan inode deleted
[    3.723722] EXT4-fs (sdb2): recovery complete
[    3.955854] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    5.525670] Adding 9764860k swap on /dev/sdb5.  Priority:-1 extents:1 across:9764860k
[    6.056574] udev[423]: starting version 163
[    6.601508] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[    7.006861] parport_pc 00:08: reported by Plug and Play ACPI
[    7.006909] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    7.302224] lp0: using parport0 (interrupt-driven).
[    7.365423] ppdev: user-space parallel port driver
[    7.509656] Linux video capture interface: v2.00
[    7.548677] EDAC MC: Ver: 2.1.0 Jan 21 2011
[    7.659898] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[    7.730504] flexcop-pci: will use the HW PID filter.
[    7.730508] flexcop-pci: card revision 2
[    7.730517] b2c2_flexcop_pci 0000:06:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    7.730582] ------------[ cut here ]------------
[    7.730588] WARNING: at /build/buildd/linux-2.6.35/fs/proc/generic.c:317 __xlate_proc_name+0xcd/0xf0()
[    7.730590] Hardware name: X38-DS4
[    7.730592] name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver'
[    7.730593] Modules linked in: b2c2_flexcop_pci(+) b2c2_flexcop dvb_core cx24123 cx24113 ir_core edac_core psmouse videodev v4l1_compat v4l2_compat_ioctl32 snd soundcore snd_page_alloc s5h1420 ppdev lp serio_raw parport_pc parport usbhid hid dm_raid45 xor ahci firewire_ohci r8169 firewire_core mii crc_itu_t pata_jmicron libahci
[    7.730614] Pid: 734, comm: modprobe Not tainted 2.6.35-25-generic #44-Ubuntu
[    7.730616] Call Trace:
[    7.730622]  [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0
[    7.730625]  [<ffffffff81060a16>] warn_slowpath_fmt+0x46/0x50
[    7.730628]  [<ffffffff811b05ad>] __xlate_proc_name+0xcd/0xf0
[    7.730631]  [<ffffffff811b13d4>] __proc_create+0x74/0x150
[    7.730634]  [<ffffffff811b16ce>] proc_mkdir_mode+0x2e/0x60
[    7.730636]  [<ffffffff811b1716>] proc_mkdir+0x16/0x20
[    7.730640]  [<ffffffff810cdbcb>] register_handler_proc+0x11b/0x140
[    7.730644]  [<ffffffff810cadb1>] __setup_irq+0x1e1/0x340
[    7.730647]  [<ffffffff81143564>] ? kmem_cache_alloc_notrace+0xb4/0xd0
[    7.730651]  [<ffffffffa01892d0>] ? flexcop_pci_isr+0x0/0x190 [b2c2_flexcop_pci]
[    7.730654]  [<ffffffff810cb85c>] request_threaded_irq+0x10c/0x1e0
[    7.730658]  [<ffffffffa018925d>] flexcop_pci_init+0xcd/0x140 [b2c2_flexcop_pci]
[    7.730661]  [<ffffffffa018952f>] flexcop_pci_probe+0xcf/0x250 [b2c2_flexcop_pci]
[    7.730666]  [<ffffffff812d7717>] local_pci_probe+0x17/0x20
[    7.730669]  [<ffffffff812d7a09>] __pci_device_probe+0xe9/0xf0
[    7.730673]  [<ffffffff812b9d4a>] ? kobject_get+0x1a/0x30
[    7.730677]  [<ffffffff813847d9>] ? get_device+0x19/0x20
[    7.730680]  [<ffffffff812d8aaa>] pci_device_probe+0x3a/0x60
[    7.730683]  [<ffffffff81388b98>] really_probe+0x68/0x190
[    7.730686]  [<ffffffff81388d05>] driver_probe_device+0x45/0x70
[    7.730688]  [<ffffffff81388dcb>] __driver_attach+0x9b/0xa0
[    7.730691]  [<ffffffff81388d30>] ? __driver_attach+0x0/0xa0
[    7.730693]  [<ffffffff81387fd8>] bus_for_each_dev+0x68/0x90
[    7.730696]  [<ffffffff81388a0e>] driver_attach+0x1e/0x20
[    7.730698]  [<ffffffff813882ce>] bus_add_driver+0xde/0x280
[    7.730701]  [<ffffffff81389110>] driver_register+0x80/0x150
[    7.730705]  [<ffffffff8158e7b6>] ? notifier_call_chain+0x56/0x80
[    7.730708]  [<ffffffff812d8d36>] __pci_register_driver+0x56/0xd0
[    7.730712]  [<ffffffff810850f5>] ? __blocking_notifier_call_chain+0x65/0x80
[    7.730715]  [<ffffffffa018d000>] ? flexcop_pci_module_init+0x0/0x20 [b2c2_flexcop_pci]
[    7.730720]  [<ffffffffa018d01e>] flexcop_pci_module_init+0x1e/0x20 [b2c2_flexcop_pci]
[    7.730724]  [<ffffffff8100204c>] do_one_initcall+0x3c/0x1a0
[    7.730727]  [<ffffffff8109bd7b>] sys_init_module+0xbb/0x200
[    7.730731]  [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[    7.730733] ---[ end trace c5344bf710d8d08a ]---
[    7.761452] DVB: registering new adapter (FlexCop Digital TV device)
[    7.762773] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0
[    7.763202] b2c2-flexcop: MAC address = 00:d0:d7:14:04:dc
[    7.764032] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[    7.764070] CX24123: wrong demod revision: 87
[    7.792987] gspca: main v2.9.0 registered
[    7.815121] IR NEC protocol handler initialized
[    8.046071] type=1400 audit(1296237564.729:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=621 comm="apparmor_parser"
[    8.046086] type=1400 audit(1296237564.729:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=622 comm="apparmor_parser"
[    8.046693] type=1400 audit(1296237564.729:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=621 comm="apparmor_parser"
[    8.046706] type=1400 audit(1296237564.729:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=622 comm="apparmor_parser"
[    8.047014] type=1400 audit(1296237564.729:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=621 comm="apparmor_parser"
[    8.047031] type=1400 audit(1296237564.729:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=622 comm="apparmor_parser"
[    8.058776] IR RC5(x) protocol handler initialized
[    8.058855] gspca: probing 0ac8:303b
[    8.115138] IR RC6 protocol handler initialized
[    8.145649] IR JVC protocol handler initialized
[    8.151384] Registered IR keymap rc-rc6-mce
[    8.151501] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/virtual/rc/rc0/input4
[    8.151554] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/virtual/rc/rc0
[    8.151579] mceusb 3-2:1.0: Registered Philips eHome Infrared Transceiver on usb3:2
[    8.151602] usbcore: registered new interface driver mceusb
[    8.152273] IR Sony protocol handler initialized
[    8.217374] lirc_dev: IR Remote Control driver registered, major 249
[    8.259651] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[    8.259655] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[    8.259714] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[    8.260038] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[    8.260041] IR LIRC bridge handler initialized
[    8.417567] zc3xx: probe sensor -> 000a
[    8.417571] zc3xx: Find Sensor PB0330. Chip revision 0
[    8.419644] input: zc3xx as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/input/input5
[    8.419752] gspca: video0 created
[    8.419755] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
[    8.419788] usbcore: registered new interface driver zc3xx
[    8.419790] zc3xx: registered
[    8.639873]   alloc irq_desc for 20 on node -1
[    8.639876]   alloc kstat_irqs on node -1
[    8.639883] SB-XFi 0000:06:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    9.025871] nvidia: module license 'NVIDIA' taints kernel.
[    9.025875] Disabling lock debugging due to kernel taint
[    9.442314] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.442322] nvidia 0000:01:00.0: setting latency timer to 64
[    9.442331] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    9.442587] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.28  Wed Sep 29 09:44:58 PDT 2010
[   10.390488] type=1400 audit(1296237567.069:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=974 comm="apparmor_parser"
[   10.391091] type=1400 audit(1296237567.069:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=974 comm="apparmor_parser"
[   10.391427] type=1400 audit(1296237567.069:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=974 comm="apparmor_parser"
[   10.480588] type=1400 audit(1296237567.169:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=973 comm="apparmor_parser"
[   11.142270] r8169 0000:05:00.0: eth0: link down
[   11.142279] r8169 0000:05:00.0: eth0: link down
[   11.143142] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.762137] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[   18.166097] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[   19.178841] r8169 0000:05:00.0: eth0: link up
[   19.179720] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   29.472558] eth0: no IPv6 routers present
[  623.481277] usb 2-2: new high speed USB device using ehci_hcd and address 2
[  623.697066] Initializing USB Mass Storage driver...
[  623.697292] scsi8 : usb-storage 2-2:1.0
[  623.697625] usbcore: registered new interface driver usb-storage
[  623.697628] USB Mass Storage support registered.
[  624.696609] scsi 8:0:0:0: Direct-Access     ChipsBnk SD/MMCReader     4081 PQ: 0 ANSI: 2
[  624.697224] sd 8:0:0:0: Attached scsi generic sg3 type 0
[  624.698599] sd 8:0:0:0: [sdc] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB)
[  624.699084] sd 8:0:0:0: [sdc] Write Protect is off
[  624.699089] sd 8:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[  624.699092] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  624.701210] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  624.701217]  sdc:
[  624.703468] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[  624.703473] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[  647.544499] usb 2-2: USB disconnect, address 2
[ 1253.767230] show_signal_msg: 24 callbacks suppressed
[ 1253.767236] npviewer.bin[5074]: segfault at 418 ip 00000000f6059c86 sp 00000000ff828528 error 6 in libflashplayer.so[f5e0a000+b2e000]
emre_@emre-PC:~/Masaüstü/airties/xp$



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 28 Ocak 2011 - 22:18:07
ndiswrapper ile yorucuda olsa kurmayı başardım ama şimdide kablosuz ağıma bağlanamıyorum? ikidebir şifre istiyor giriyorum bir daha istiyor. wicd kurdum onunla denedim şifreyi doğru değil diyip duruyor...

şifreyi doğru giriyorum hatta modeme girip şifreyi kontrol ettim kopyala yapıştır yaptım ama yine aynısını dedi..

Şifreleme türü WPA (wpa2 yada wep değil yalnızca wpa seçili malum komşumun laptop biraz eski onun wireless kartı yalnız wpa destekliyor.)


Not: Wireless adaptörüm: Airties 2410 ve Modemim Airties 5450
Not2 : Laptopumla sorunsuzca bağlantı kurabiliyorum ama ndiswrapper ile yüklediğim xp64bit sürüsü ile çevremdeki tüm ağları görebiliyorum ama bağlantı kuramıyorum.

[Gopca]

bcmwlhigh6.inf VİSTA x64 bcmwlhigh5.inf ise XP x64 için sürücüler... Vista x64 için olan sürücüyü yüklediğimde wireless adaptörü hiç çalışmıyor ancak XP x64 için olan sürücü yüklediğimde çalışıyor ve kablosuz ağları buluyor.. Ancak bağlantı sağlayamıyor. Öğle tatilinde modemdeki şifreyi kaldırıp birde öyle deneyeceğim bakalım ne diyecek...


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 29 Ocak 2011 - 13:12:12
şifreyi kaldırdım yine bağlanmadı sendeki dosyaları gönderirmisin onlarla deneyim. birde sistemim 64bit...

[lyalcin06]

bcmwlhigh6.inf ile ben 32 bit ubuntu ile kurdum airties sitesindeki V2 driver ile oldu
lyalcin06@gmail.com buraya boş mail atarsan gödnerirm drv leri istersen

[Gopca]

gönderdim hasanemre06@gmail.com adres...

[raptowne]

Merhaba

Yeni konu açmamak için burdan devam etmek istedim.

ndiswrapper yaptıgımızda ndiswrapperın kurulu olmadıgını suda apt-get ..... koduyla kurulum yapmamızı ıstıyor.... bu yuzden bir ethernet kablosuna ihtiyac duyuyoruz.

benım derdım airties cd si içindeki bcmwlhigh6.inf ile terminalden nasıl kurulum yaparım...birkaç yöntem denedim lakin başarılı olamadım...

[heartsmagic]

.inf dosyaları yani Windows sürücüleri ile kurulum yapılacaksa ndsiwrapper şart. Eğer internet imkânı hiç yoksa gerekli paketleri http://packages.ubuntu.com adresinden indirip, Ubuntu tarafına taşıyıp elle kurabilirsin.

Emin değilim ancak şu iki paket yeterli olabilir.
http://packages.ubuntu.com/precise/ndiswrapper-common
http://packages.ubuntu.com/precise/ndiswrapper-utils-1.9

[raptowne]

Merhaba

Sanırsam http://packages.ubuntu.com/precise/ndiswrapper-utils-1.9 paketi yeterli olur diye düşünüyorum...Çünkü o paketide kurmamı istiyordu sistem...

[heartsmagic]

ndiswrapper-common paketinin yanındaysa söylediğin şey doğrudur, istiyordur muhtemelen.

[raptowne]

paketlerı ındırdıgım zamanda bu sefer ubuntu kerner package ' ı istiyor...artık 30-40 metre ethernet kablosu şart oldu...

[heartsmagic]

Tam olarak hangi paketi istiyor? Öyle bir bağımlılık olmaması lazım sanki.

Kod Seç Genişlet

apt-cache show ndiswrapper-utils-1.9 | grep -i depends

Depends: libc6 (>= 2.7), ndiswrapper-common

ndiswrapper-common paketi ise bağımlılık istemiyor zaten. libc6 da yanlış bilmiyorsam kurulu geliyor.

[raptowne]

Birşekilde ndiswrapper'ı kurabildim.... sourceforge dan paket halinde indirdim. (tar.gz olarak ve onu yukleyebildim)

lsusb cıktısı asagıdaki gibi oldu.sistem airtiesi gorüyor.ama internete girmiyor.ne yaptıysam olmadı.sisteme tanıtabıldık.şimdi ise giremiyoruz

Kod Seç Genişlet

root@weyes:/home/weyes# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0ac8:3450 Z-Star Microelectronics Corp.
Bus 001 Device 004: ID 1eda:2410 AirTies Wireless Networks
Bus 004 Device 002: ID 046d:c52e Logitech, Inc.

[heartsmagic]

Sürücü kurmasan bile lsusb ile görülür genelde aygıtlar. Orada görünüyor olması haliyle çalışacağı anlamına gelmiyor. Bu USB modem mi? Saçma oldu soru, lsusb ile görüldüğüne göre öyle olmalı tabi.

Kod Seç Genişlet

iwconfig
iwlist scanning çıktıları ne diyor?

[furkankalkan]

Tamam ndiswrapper hata vermiyor. Böylelikle sürücü kurulmuştur büyük ihtimalle. dmesg | tail çıktısı bu konuda bilgilendirebilir bizi. Bu arada ifconfig ne diyor ?

[raptowne]

devilman abi bu senin istedigin çıktının alabildigim bir bölümü.hepsini alamadım.biraz uzun artık idare edeceksin

Kod Seç Genişlet

[    0.164029] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.164034] pci 0000:00:1c.1:   bridge window [io  0xa000-0xafff]
[    0.164039] pci 0000:00:1c.1:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.164045] pci 0000:00:1c.1:   bridge window [mem 0xd3000000-0xd30fffff 64bit pref]
[    0.164114] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.164119] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.164127] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.164130] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.164132] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.164135] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.164138] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.164156] pci_bus 0000:00: on NUMA node 0
[    0.164162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.164342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.164387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.164438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.164541]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.164544]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.164546] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.170794] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.170844] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.170892] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.170941] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.170988] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.171036] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.171085] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.171133] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.171276] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.171280] vgaarb: loaded
[    0.171282] vgaarb: bridge control possible 0000:01:00.0
[    0.171405] i2c-core: driver [aat2870] using legacy suspend method
[    0.171407] i2c-core: driver [aat2870] using legacy resume method
[    0.171497] SCSI subsystem initialized
[    0.171561] libata version 3.00 loaded.
[    0.171613] usbcore: registered new interface driver usbfs
[    0.171628] usbcore: registered new interface driver hub
[    0.171657] usbcore: registered new device driver usb
[    0.171753] PCI: Using ACPI for IRQ routing
[    0.173289] PCI: pci_cache_line_size set to 64 bytes
[    0.173363] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.173366] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[    0.173475] NetLabel: Initializing
[    0.173477] NetLabel:  domain hash size = 128
[    0.173478] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.173489] NetLabel:  unlabeled traffic allowed by default
[    0.173537] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.173546] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.173551] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.180069] Switching to clocksource hpet
[    0.188941] AppArmor: AppArmor Filesystem Enabled
[    0.188979] pnp: PnP ACPI init
[    0.189000] ACPI: bus type pnp registered
[    0.189099] pnp 00:00: [bus 00-3f]
[    0.189102] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.189105] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.189107] pnp 00:00: [io  0x0d00-0xffff window]
[    0.189109] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.189112] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.189114] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[    0.189172] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.189231] pnp 00:01: [io  0x0010-0x001f]
[    0.189236] pnp 00:01: [io  0x0022-0x003f]
[    0.189238] pnp 00:01: [io  0x0044-0x005f]
[    0.189240] pnp 00:01: [io  0x0062-0x0063]
[    0.189242] pnp 00:01: [io  0x0065-0x006f]
[    0.189244] pnp 00:01: [io  0x0074-0x007f]
[    0.189246] pnp 00:01: [io  0x0091-0x0093]
[    0.189248] pnp 00:01: [io  0x00a2-0x00bf]
[    0.189250] pnp 00:01: [io  0x00e0-0x00ef]
[    0.189252] pnp 00:01: [io  0x04d0-0x04d1]
[    0.189253] pnp 00:01: [io  0x0290-0x029f]
[    0.189255] pnp 00:01: [io  0x0800-0x087f]
[    0.189257] pnp 00:01: [io  0x0290-0x0294]
[    0.189259] pnp 00:01: [io  0x0880-0x088f]
[    0.189324] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.189327] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.189329] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.189332] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.189335] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.189338] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.189351] pnp 00:02: [dma 4]
[    0.189353] pnp 00:02: [io  0x0000-0x000f]
[    0.189355] pnp 00:02: [io  0x0080-0x0090]
[    0.189357] pnp 00:02: [io  0x0094-0x009f]
[    0.189359] pnp 00:02: [io  0x00c0-0x00df]
[    0.189387] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.189426] pnp 00:03: [io  0x0070-0x0073]
[    0.189440] pnp 00:03: [irq 8]
[    0.189474] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.189483] pnp 00:04: [io  0x0061]
[    0.189513] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.189522] pnp 00:05: [io  0x00f0-0x00ff]
[    0.189528] pnp 00:05: [irq 13]
[    0.189558] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.189770] pnp 00:06: [io  0x03f8-0x03ff]
[    0.189776] pnp 00:06: [irq 4]
[    0.189840] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.190013] pnp 00:07: [io  0x0378-0x037f]
[    0.190019] pnp 00:07: [irq 7]
[    0.190067] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.190177] pnp 00:08: [io  0x0400-0x04bf]
[    0.190230] system 00:08: [io  0x0400-0x04bf] has been reserved
[    0.190233] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190419] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
[    0.190481] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.190484] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190619] pnp 00:0a: [mem 0x000d0000-0x000d7fff]
[    0.190622] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[    0.190624] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[    0.190626] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[    0.190628] pnp 00:0a: [mem 0x7fff0000-0x7fffffff]
[    0.190631] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[    0.190633] pnp 00:0a: [mem 0x00100000-0x7ffeffff]
[    0.190635] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.190637] pnp 00:0a: [mem 0xfed13000-0xfed1dfff]
[    0.190639] pnp 00:0a: [mem 0xfed20000-0xfed8ffff]
[    0.190641] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.190643] pnp 00:0a: [mem 0xffb00000-0xffb7ffff]
[    0.190646] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[    0.190648] pnp 00:0a: [mem 0x000e0000-0x000effff]
[    0.190716] system 00:0a: [mem 0x000d0000-0x000d7fff] has been reserved
[    0.190719] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.190722] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.190725] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.190728] system 00:0a: [mem 0x7fff0000-0x7fffffff] could not be reserved
[    0.190731] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.190733] system 00:0a: [mem 0x00100000-0x7ffeffff] could not be reserved
[    0.190736] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.190739] system 00:0a: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.190742] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.190744] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.190747] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.190750] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[    0.190753] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
[    0.190756] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.190775] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
[    0.190820] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[    0.190827] pnp: PnP ACPI: found 12 devices
[    0.190828] ACPI: ACPI bus type pnp unregistered
[    0.190833] PnPBIOS: Disabled by ACPI PNP
[    0.227271] PCI: max bus depth: 1 pci_try_num: 2
[    0.227318] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.227322] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.227327] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref]
[    0.227330] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.227333] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.227337] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd1ffffff]
[    0.227341] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.227345] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.227348] pci 0000:00:1c.0:   bridge window [io  0x8000-0x8fff]
[    0.227353] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.227358] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.227365] pci 0000:03:00.0: BAR 6: assigned [mem 0xd3020000-0xd302ffff pref]
[    0.227367] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.227370] pci 0000:00:1c.1:   bridge window [io  0xa000-0xafff]
[    0.227375] pci 0000:00:1c.1:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.227379] pci 0000:00:1c.1:   bridge window [mem 0xd3000000-0xd30fffff 64bit pref]
[    0.227386] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.227389] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.227418] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.227423] pci 0000:00:01.0: setting latency timer to 64
[    0.227431] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.227436] pci 0000:00:1c.0: setting latency timer to 64
[    0.227446] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.227450] pci 0000:00:1c.1: setting latency timer to 64
[    0.227456] pci 0000:00:1e.0: setting latency timer to 64
[    0.227461] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.227463] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.227465] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.227468] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.227470] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff]
[    0.227473] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.227475] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
[    0.227477] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.227480] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.227482] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[    0.227485] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.227487] pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
[    0.227490] pci_bus 0000:03: resource 1 [mem 0xd2000000-0xd2ffffff]
[    0.227492] pci_bus 0000:03: resource 2 [mem 0xd3000000-0xd30fffff 64bit pref]
[    0.227495] pci_bus 0000:04: resource 0 [io  0x7000-0x7fff]
[    0.227497] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.227499] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.227501] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.227504] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[    0.227506] pci_bus 0000:04: resource 8 [mem 0x80000000-0xfebfffff]
[    0.227558] NET: Registered protocol family 2
[    0.227635] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.227887] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.228422] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.228692] TCP: Hash tables configured (established 131072 bind 65536)
[    0.228695] TCP reno registered
[    0.228699] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.228709] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.228811] NET: Registered protocol family 1
[    0.228859] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.228877] pci 0000:00:1d.0: PCI INT A disabled
[    0.228887] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.228903] pci 0000:00:1d.1: PCI INT B disabled
[    0.228915] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.228931] pci 0000:00:1d.2: PCI INT C disabled
[    0.228939] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.228955] pci 0000:00:1d.3: PCI INT D disabled
[    0.228963] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.228995] pci 0000:00:1d.7: PCI INT A disabled
[    0.229010] pci 0000:01:00.0: Boot video device
[    0.229018] PCI: CLS 32 bytes, default 64
[    0.229393] audit: initializing netlink socket (disabled)
[    0.229405] type=2000 audit(1342337694.224:1): initialized
[    0.254507] highmem bounce pool size: 64 pages
[    0.254513] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.264132] VFS: Disk quotas dquot_6.5.2
[    0.264206] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.264766] fuse init (API version 7.17)
[    0.264860] msgmni has been set to 1685
[    0.265175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.265201] io scheduler noop registered
[    0.265203] io scheduler deadline registered
[    0.265211] io scheduler cfq registered (default)
[    0.265325] pcieport 0000:00:01.0: setting latency timer to 64
[    0.265360] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.265408] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.265446] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.265507] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.265545] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.265630] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.265654] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.265747] intel_idle: MWAIT substates: 0x220
[    0.265748] intel_idle: does not run on family 6 model 15
[    0.265829] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.265834] ACPI: Power Button [PWRB]
[    0.265887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.265891] ACPI: Power Button [PWRF]
[    0.267187] ERST: Table is not found!
[    0.267189] GHES: HEST is not enabled!
[    0.267271] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.287652] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.288040] isapnp: Scanning for PnP cards...
[    0.430899] Freeing initrd memory: 13804k freed
[    0.641265] isapnp: No Plug & Play device found
[    0.716645] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.732324] Linux agpgart interface v0.103
[    0.734074] brd: module loaded
[    0.734890] loop: module loaded
[    0.735072] ata_piix 0000:00:1f.2: version 2.13
[    0.735092] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.735097] ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
[    0.735138] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.735484] scsi0 : ata_piix
[    0.735569] scsi1 : ata_piix
[    0.736206] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.736209] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.736586] Fixed MDIO Bus: probed
[    0.736606] tun: Universal TUN/TAP device driver, 1.6
[    0.736608] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.736743] PPP generic driver version 2.4.2
[    0.736848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.736864] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.736885] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.736888] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.736937] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.736955] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.740831] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.740848] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3104000
[    0.756036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.756231] hub 1-0:1.0: USB hub found
[    0.756235] hub 1-0:1.0: 8 ports detected
[    0.756319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.756332] uhci_hcd: USB Universal Host Controller Interface driver
[    0.756351] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.756360] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.756363] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.756408] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.756430] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
[    0.756557] hub 2-0:1.0: USB hub found
[    0.756561] hub 2-0:1.0: 2 ports detected
[    0.756626] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.756633] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.756636] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.756681] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.756712] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.756838] hub 3-0:1.0: USB hub found
[    0.756842] hub 3-0:1.0: 2 ports detected
[    0.756907] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.756913] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.756917] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.756959] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.756989] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[    0.757114] hub 4-0:1.0: USB hub found
[    0.757118] hub 4-0:1.0: 2 ports detected
[    0.757183] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.757190] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.757193] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.757241] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.757271] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[    0.757404] hub 5-0:1.0: USB hub found
[    0.757408] hub 5-0:1.0: 2 ports detected
[    0.757516] usbcore: registered new interface driver libusual
[    0.757566] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.757992] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.758003] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.758221] mousedev: PS/2 mouse device common for all mice
[    0.758367] rtc_cmos 00:03: RTC can wake from S4
[    0.758476] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.758499] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.758558] device-mapper: uevent: version 1.0.3
[    0.758629] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.758662] EISA: Probing bus 0 at eisa.0
[    0.758665] EISA: Cannot allocate resource for mainboard
[    0.758667] Cannot allocate resource for EISA slot 1
[    0.758669] Cannot allocate resource for EISA slot 2
[    0.758671] Cannot allocate resource for EISA slot 3
[    0.758673] Cannot allocate resource for EISA slot 4
[    0.758675] Cannot allocate resource for EISA slot 5
[    0.758676] Cannot allocate resource for EISA slot 6
[    0.758678] Cannot allocate resource for EISA slot 7
[    0.758680] Cannot allocate resource for EISA slot 8
[    0.758682] EISA: Detected 0 cards.
[    0.758691] cpufreq-nforce2: No nForce2 chipset.
[    0.758694] cpuidle: using governor ladder
[    0.758695] cpuidle: using governor menu
[    0.758697] EFI Variables Facility v0.08 2004-May-17
[    0.758963] TCP cubic registered
[    0.759086] NET: Registered protocol family 10
[    0.759667] NET: Registered protocol family 17
[    0.759682] Registering the dns_resolver key type
[    0.759707] Using IPI No-Shortcut mode
[    0.759810] PM: Hibernation image not present or could not be loaded.
[    0.759822] registered taskstats version 1
[    0.769414]   Magic number: 4:901:571
[    0.769502] rtc_cmos 00:03: setting system clock to 2012-07-15 07:34:55 UTC (1342337695)
[    0.770526] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.770528] EDD information not available.
[    0.908392] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL02, max UDMA/66
[    0.908397] ata1.01: ATAPI: HL-DT-ST GCE-8527B, 1.04, max UDMA/33
[    0.908491] ata2.00: ATA-7: ST3250310AS, 3.AHB, max UDMA/100
[    0.908494] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.908500] ata2.01: ATA-8: WDC WD5000AAKS-65A7B2, 01.03B01, max UDMA/133
[    0.908503] ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.924274] ata1.00: configured for UDMA/66
[    0.924343] ata2.00: configured for UDMA/100
[    0.940152] ata2.01: configured for UDMA/133
[    0.956226] ata1.01: configured for UDMA/33
[    0.962628] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H12N  UL02 PQ: 0 ANSI: 5
[    0.968700] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.968705] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.968882] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.969000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.971357] scsi 0:0:1:0: CD-ROM            HL-DT-ST CD-RW GCE-8527B  1.04 PQ: 0 ANSI: 5
[    0.973204] sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[    0.973375] sr 0:0:1:0: Attached scsi CD-ROM sr1
[    0.973480] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    0.973610] scsi 1:0:0:0: Direct-Access     ATA      ST3250310AS      3.AH PQ: 0 ANSI: 5
[    0.973724] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.973746] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    0.973798] sd 1:0:0:0: [sda] Write Protect is off
[    0.973801] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.973827] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.973856] scsi 1:0:1:0: Direct-Access     ATA      WDC WD5000AAKS-6 01.0 PQ: 0 ANSI: 5
[    0.973960] sd 1:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.973989] sd 1:0:1:0: Attached scsi generic sg3 type 0
[    0.974008] sd 1:0:1:0: [sdb] Write Protect is off
[    0.974011] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    0.974032] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.019910]  sda: sda1 sda2 < sda5 >
[    1.040189]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[    1.040278] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.040584] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.040650] Freeing unused kernel memory: 740k freed
[    1.040933] Write protecting the kernel text: 5828k
[    1.040951] Write protecting the kernel read-only data: 2376k
[    1.040952] NX-protecting the kernel data: 4412k
[    1.056718] udevd[88]: starting version 175
[    1.109598] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.109623] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.109652] r8169 0000:03:00.0: setting latency timer to 64
[    1.109713] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    1.111395] r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xf840c000, 00:1f:d0:02:e7:b0, XID 1c4000c0 IRQ 43
[    1.111399] r8169 0000:03:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    1.180047] usb 1-6: new high-speed USB device number 3 using ehci_hcd
[    1.228040] Refined TSC clocksource calibration: 2399.999 MHz.
[    1.228048] Switching to clocksource tsc
[    1.440052] usb 1-7: new high-speed USB device number 4 using ehci_hcd
[    1.641839] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.812033] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    9.889543] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.910026] udevd[322]: starting version 175
[    9.960221] lp: driver loaded but no devices found
[    9.960987] Adding 2096124k swap on /dev/sda5.  Priority:-1 extents:1 across:2096124k
[   10.002259] intel_rng: FWH not detected
[   10.010849] [drm] Initialized drm 1.1.0 20060810
[   10.016940] leds_ss4200: no LED devices found
[   10.053043] [drm] radeon defaulting to kernel modesetting.
[   10.053046] [drm] radeon kernel modesetting enabled.
[   10.053172] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.053178] radeon 0000:01:00.0: setting latency timer to 64
[   10.053634] [drm] initializing kernel modesetting (RV515 0x1002:0x7143 0x17AF:0x204E).
[   10.053657] [drm] register mmio base: 0xD1000000
[   10.053659] [drm] register mmio size: 65536
[   10.053897] ATOM BIOS: RV505PRO
[   10.053919] [drm] Generation 2 PCI interface, using max accessible memory
[   10.053924] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   10.053927] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   10.053948] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.053949] [drm] Driver supports precise vblank timestamp query.
[   10.053994] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[   10.054000] radeon 0000:01:00.0: radeon: using MSI.
[   10.054024] [drm] radeon: irq initialized.
[   10.054823] [drm] Detected VRAM RAM=512M, BAR=256M
[   10.054826] [drm] RAM width 128bits DDR
[   10.054902] [TTM] Zone  kernel: Available graphics memory: 438886 kiB.
[   10.054904] [TTM] Zone highmem: Available graphics memory: 1030730 kiB.
[   10.054906] [TTM] Initializing pool allocator.
[   10.054935] [drm] radeon: 512M of VRAM memory ready
[   10.054937] [drm] radeon: 512M of GTT memory ready.
[   10.054958] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.056859] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[   10.058007] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   10.058037] radeon 0000:01:00.0: WB enabled
[   10.058158] [drm] Loading R500 Microcode
[   10.077164] parport_pc 00:07: reported by Plug and Play ACPI
[   10.077212] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   10.079847] type=1400 audit(1342326904.806:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=436 comm="apparmor_parser"
[   10.080269] type=1400 audit(1342326904.810:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser"
[   10.080503] type=1400 audit(1342326904.810:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=436 comm="apparmor_parser"
[   10.089302] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2
[   10.089450] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[   10.093927] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input3
[   10.094252] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[   10.094294] usbcore: registered new interface driver usbhid
[   10.094296] usbhid: USB HID core driver
[   10.118556] Linux video capture interface: v2.00
[   10.121340] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450)
[   10.124221] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input4
[   10.124339] usbcore: registered new interface driver uvcvideo
[   10.124341] USB Video Class driver (1.1.1)
[   10.137721] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.137778] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   10.137808] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   10.175294] lp0: using parport0 (interrupt-driven).
[   10.179472] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.216630] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   10.216826] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.216964] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.218145] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.218683] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.299569] [drm] radeon: ring at 0x0000000020001000
[   10.299601] [drm] ring test succeeded in 8 usecs
[   10.299761] [drm] radeon: ib pool ready.
[   10.299854] [drm] ib test succeeded in 0 usecs
[   10.300279] [drm] Radeon Display Connectors
[   10.300281] [drm] Connector 0:
[   10.300282] [drm]   VGA
[   10.300284] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   10.300285] [drm]   Encoders:
[   10.300287] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   10.300288] [drm] Connector 1:
[   10.300289] [drm]   S-video
[   10.300290] [drm]   Encoders:
[   10.300291] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[   10.300292] [drm] Connector 2:
[   10.300293] [drm]   DVI-I
[   10.300294] [drm]   HPD2
[   10.300296] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   10.300298] [drm]   Encoders:
[   10.300299] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   10.300300] [drm]     DFP3: INTERNAL_LVTM1
[   10.300307] [drm] Possible lm63 thermal controller at 0x4c
[   10.318386] ppdev: user-space parallel port driver
[   10.420925] [drm] fb mappable at 0xC00C0000
[   10.420928] [drm] vram apper at 0xC0000000
[   10.420930] [drm] size 5300224
[   10.420932] [drm] fb depth is 24
[   10.420933] [drm]    pitch is 5888
[   10.421051] fbcon: radeondrmfb (fb0) is primary device
[   10.421165] Console: switching to colour frame buffer device 180x56
[   10.421197] fb0: radeondrmfb frame buffer device
[   10.421199] drm: registered panic notifier
[   10.421207] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[   10.605375] init: failsafe main process (633) killed by TERM signal
[   10.922344] Bluetooth: Core ver 2.16
[   10.922389] NET: Registered protocol family 31
[   10.922391] Bluetooth: HCI device and connection manager initialized
[   10.922394] Bluetooth: HCI socket layer initialized
[   10.922396] Bluetooth: L2CAP socket layer initialized
[   10.922667] Bluetooth: SCO socket layer initialized
[   10.925038] Bluetooth: RFCOMM TTY layer initialized
[   10.925043] Bluetooth: RFCOMM socket layer initialized
[   10.925045] Bluetooth: RFCOMM ver 1.11
[   10.946695] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.946698] Bluetooth: BNEP filters: protocol multicast
[   10.956779] type=1400 audit(1342326905.686:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=727 comm="apparmor_parser"
[   10.957286] type=1400 audit(1342326905.686:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=727 comm="apparmor_parser"
[   11.094577] r8169 0000:03:00.0: eth0: link down
[   11.094756] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.095044] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.129742] type=1400 audit(1342326905.858:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=774 comm="apparmor_parser"
[   11.129984] type=1400 audit(1342326905.858:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=775 comm="apparmor_parser"
[   11.130404] type=1400 audit(1342326905.858:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=775 comm="apparmor_parser"
[   11.130639] type=1400 audit(1342326905.858:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=775 comm="apparmor_parser"
[   11.136073] type=1400 audit(1342326905.866:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=778 comm="apparmor_parser"
[   40.379268] audit_printk_skb: 36 callbacks suppressed
[   40.379271] type=1400 audit(1342326935.106:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1837 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
root@weyes:/home/weyes#

heartsmagic abi buda senin istedigin

Kod Seç Genişlet

root@weyes:/home/weyes# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

root@weyes:/home/weyes# iwlist scanning
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

[furkankalkan]

link is not ready gibi mesajlar var dmesg de ayrıca kablosuz ağ (wlan) gözükmüyor. Ndiswrapper ın cihazı sorunsuz tanıdığına emin miyiz ?


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 14 Temmuz 2012 - 08:48:36
Evet sanırım eksik olan birşeyler var buradaki anlatıma göre :https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper ingilizceniz yoksa çevirebilirim.

[raptowne]

üstadım günaydın,

evet.yani ndiswrapper'ı düzgün kurduguma eminim,ama tanıyıp tanımadıgını bilemem ayrıca şu anda işyerimdeyim.kesin bilgiyi saat 12:00 gibi verebilirim...

ayrıca benım girmem / test etmem için gerekli komutlar varmı ?
3 yıl bırakınca böyle oluyor işte

[furkankalkan]

size de günaydın orada yazanlara göre ndiswrapper modül olarak da çalışması gerekiyormuş. Zaten ondan sonraki hata belirlemek için gerekli çıktılar bizim son istediklerimizle aynı.Bu arada lsmod çıktısında ndiswrapperla ilgili birseyler var mı ?

[raptowne]

driver'ı tekrar yukleyeyım dedım zaten yuklu dıyor..silip yükleyeyim dedim bu seferde silinmiyor

Kod Seç Genişlet

root@weyes:/home/weyes# ndiswrapper -i /home/weyes/Masaüstü/air/bcmwlhigh6.inf  driver bcmwlhigh6 is already installed
root@weyes:/home/weyes# ndiswrapper -r /home/weyes/Masaüstü/air/bcmwlhigh6.inf
couldn't delete /etc/ndiswrapper//home/weyes/Masaüstü/air/bcmwlhigh6.inf: No such file or directory
root@weyes:/home/weyes#


lsmod çıktısıda şu şekilde

Kod Seç Genişlet

weyes@weyes:~$ sudo su
[sudo] password for weyes:
root@weyes:/home/weyes# ndiswrapper -l
bcmwlhigh6 : driver installed
root@weyes:/home/weyes# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

root@weyes:/home/weyes# lsmod
Module                  Size  Used by
rfcomm                 38139  0
bnep                   17830  2
bluetooth             158438  10 rfcomm,bnep
lm63                   13998  0
joydev                 17393  0
ppdev                  12849  0
snd_hda_codec_realtek   174055  1
snd_hda_intel          32765  3
snd_hda_codec         109562  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80845  2 snd_hda_intel,snd_hda_codec
uvcvideo               67203  0
videodev               86588  1 uvcvideo
usbhid                 41906  0
hid                    77367  1 usbhid
radeon                733693  3
snd_seq_midi           13132  0
snd_rawmidi            25424  1 snd_seq_midi
psmouse                72846  0
parport_pc             32114  1
serio_raw              13027  0
snd_seq_midi_event     14475  1 snd_seq_midi
ttm                    65344  1 radeon
drm_kms_helper         45466  1 radeon
mac_hid                13077  0
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
snd_timer              28931  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
drm                   197692  5 radeon,ttm,drm_kms_helper
i2c_algo_bit           13199  1 radeon
snd                    62064  15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              14635  1 snd
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
lp                     17455  0
parport                40930  3 ppdev,parport_pc,lp
r8169                  56321  0
root@weyes:/home/weyes#