Disk Yazamıyorum

[Linuxman.]

Bir dönem disk yazamıyordum ve sorunun donanımsal olduğunu düşünürek,DVD-Write'ri pc'den çıkarttım.(donanımı başka bilgisayarda test ettim,çalışmıyordu).Ve ardından bir süreliğine kuzenin yeni aldığı DVD-WR aldım.İlkönce windowsta dosya yazmaya çalıştım fakat yazma işlemi başarısız oldu ve bende Ubuntudaki Brasero disk yazıcısının yazacağını düşünerek Linux'u açtım.Fakat bu olmaz,yine hata??

Kod Seç Genişlet

Checking session consistency (brasero_burn_check_session_consistency burn.c:1905)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_current_track
BraseroBurnURI called brasero_job_get_input_type
BraseroBurnURI no burn:// URI found
BraseroBurnURI stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack called brasero_job_get_input_type
BraseroLocalTrack no remote URIs
BraseroLocalTrack stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroWodim called brasero_job_get_action
BraseroWodim creating input
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim got varg:
BraseroWodim deactivating
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage creating input
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage deactivating
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage getting varg
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_current_track
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_data_label
BraseroGenisoimage called brasero_job_get_flags
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_set_current_action
BraseroGenisoimage got varg:
/usr/bin/genisoimage
-input-charset
utf8
-r
-J
-graft-points
-path-list
/tmp/brasero_tmp_HF6JZU
-exclude-list
/tmp/brasero_tmp_SB6JZU
-V
Data disc (28 Aug 09)
-A
Brasero-2.26.1
-sysid
LINUX
-quiet
-print-size
BraseroGenisoimage Launching command
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage stderr: HUP
BraseroGenisoimage stdout: 2146429
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_set_output_size_for_current_track
BraseroGenisoimage stdout: HUP
BraseroGenisoimage process finished with status 0
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage Finished track successfully
BraseroGenisoimage got killed
BraseroGenisoimage stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroWodim called brasero_job_get_action
BraseroWodim creating input
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_get_device
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_speed
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_fd_in
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_session_output_size
BraseroWodim called brasero_job_set_current_action
BraseroWodim got varg:
wodim
-v
dev=/dev/sr0
speed=16
driveropts=burnfree
-dao
fs=32m
tsize=2146429s
-data
-nopad
-
BraseroWodim Launching command
BraseroWodim called brasero_job_get_fd_out
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage linked to BraseroWodim
BraseroChecksumImage creating input
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_input_type
BraseroChecksumImage called brasero_job_set_current_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage Starting checksum generation live (size = 0)
BraseroChecksumImage called brasero_job_set_nonblocking
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_get_fd_out
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage linked to BraseroChecksumImage
BraseroGenisoimage getting varg
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_current_track
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_data_label
BraseroGenisoimage called brasero_job_get_flags
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_set_current_action
BraseroGenisoimage got varg:
/usr/bin/genisoimage
-input-charset
utf8
-r
-J
-graft-points
-path-list
/tmp/brasero_tmp_7174YU
-exclude-list
/tmp/brasero_tmp_7K54YU
-V
Data disc (28 Aug 09)
-A
Brasero-2.26.1
-sysid
LINUX
BraseroGenisoimage Launching command
BraseroGenisoimage called brasero_job_get_fd_out
BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: devname: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Linux sg driver version: 3.5.27
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Wodim version: 1.1.9
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: SCSI buffer size: 64512
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: communication breaks or freezes immediately after that.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 1 = CD-ROM
BraseroWodim stdout: Driveropts: 'burnfree'
BraseroWodim stdout: Device type    : Removable CD-ROM
BraseroWodim stdout: Version        : 5
BraseroWodim stdout: Response Format: 2
BraseroWodim stdout: Capabilities   :
BraseroWodim stdout: Vendor_info    : 'TSSTcorp'
BraseroWodim stdout: Identification : 'CDDVDW SH-S222A '
BraseroWodim stdout: Revision       : 'SA00'
BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW.
BraseroWodim stdout: Current: 0x0011 (DVD-R sequential recording)
BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording)
BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording)
BraseroWodim stdout: Profile: 0x0017 (Reserved/Unknown)
BraseroWodim stdout: Profile: 0x002B (DVD+R/DL)
BraseroWodim stdout: Profile: 0x001B (DVD+R)
BraseroWodim stdout: Profile: 0x001A (DVD+RW)
BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording)
BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite)
BraseroWodim stdout: Profile: 0x0012 (DVD-RAM)
BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) (current)
BraseroWodim stdout: Profile: 0x0010 (DVD-ROM)
BraseroWodim stdout: Profile: 0x000A (CD-RW)
BraseroWodim stdout: Profile: 0x0009 (CD-R)
BraseroWodim stdout: Profile: 0x0008 (CD-ROM)
BraseroWodim stdout: Profile: 0x0002 (Removable disk)
BraseroWodim stdout: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
BraseroWodim stdout: Driver flags   : SWABAUDIO BURNFREE
BraseroWodim stdout: Supported modes: PACKET SAO
BraseroWodim stdout: Drive buf size : 1376256 = 1344 KB
BraseroWodim stdout: FIFO size      : 33554432 = 32768 KB
BraseroWodim stderr: Speed set to 22160 KB/s
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01: data  4192 MB       
BraseroWodim stdout: Total size:     4814 MB (476:59.05) = 2146429 sectors
BraseroWodim stdout: Lout start:     4814 MB (477:01/04) = 2146429 sectors
BraseroWodim stdout: Current Secsize: 2048
BraseroWodim stdout: HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
BraseroWodim stdout: Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 152067
BraseroWodim stdout: Starting to write CD/DVD at speed  17.0 in real SAO mode for single session.
BraseroWodim stdout: Last chance to quit, starting real write in    4 seconds.#
BraseroWodim called brasero_job_set_dangerous
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout:    3 seconds.#
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout:    2 seconds.#
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroWodim stdout: #
BraseroGenisoimage stderr:   0.23% done, estimate finish Fri Aug 28 14:57:32 2009
BraseroWodim stdout:    1 seconds.#############   0 seconds. Operation starts.
BraseroGenisoimage stderr:   0.47% done, estimate finish Fri Aug 28 14:57:36 2009
BraseroGenisoimage stderr:   0.70% done, estimate finish Fri Aug 28 14:57:35 2009
BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready.
BraseroWodim stdout: Performing OPC...
BraseroWodim stdout: Sending CUE sheet...
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_set_current_action
BraseroWodim stdout: Starting new track at sector: 0
BraseroWodim stdout:
BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: CDB:  2A 00 00 00 01 55 00 00 1F 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: status: 0x2 (CHECK CONDITION)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 72 01 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Key: 0x3 Medium Error, deferred error, Segment 0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Code: 0x72 Qual 0x01 (session fixation error writing lead-in) Fru 0x0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense flags: Blk 0 (not valid)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: cmd finished after 0.000s timeout 200s
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: A write error occured.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Please properly read the error message above.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01:    0 of 4192 MB written.
BraseroWodim stdout: write track data: error after 698368 bytes
BraseroWodim stdout: Writing  time:  128.077s
BraseroWodim stdout: Average write speed  32.0x.
BraseroWodim stdout: Fixating...
BraseroWodim called brasero_job_set_current_action
BraseroWodim stdout: Fixating time:    0.003s
BraseroWodim stderr: wodim: fifo had 522 puts and 12 gets.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: fifo was 0 times empty and 1 times full, min fill was 98%.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: HUP
BraseroWodim stderr: HUP
BraseroWodim process finished with status 254
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
error = 0
message = "no message"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
BraseroGenisoimage disconnecting BraseroGenisoimage from BraseroChecksumImage
BraseroChecksumImage stopping
BraseroChecksumImage disconnecting BraseroChecksumImage from BraseroWodim
BraseroChecksumImage closing connection for BraseroChecksumImage
BraseroWodim stopping
BraseroWodim got killed
BraseroWodim closing connection for BraseroWodim
Session error : unknown (brasero_burn_record burn.c:2602)


Arkadaşlar lütfen yardımcı olun,sorun yine donanımsal mı ? Fakat şuan kullandığım DVD-WR çok yeni!

[kuleyni]

firmware güncellemesi var mı bakmanı öneririm.Bugüne kadar ubuntuda kullandığım en iyi cd yazma program nero linux 3 kullan birde bunla dene.

[Linuxman.]

firmware güncellemesi var mı bakmanı öneririm.Bugüne kadar ubuntuda kullandığım en iyi cd yazma program nero linux 3 kullan birde bunla dene.

Firmware güncellemesini nasıl kontrol edebilirim ?

[kuleyni]

dvd sürücünün markasının sistesine bağlan orda kendi modeline bak en son firmware ne zaman yayınlanmış.

[Linuxman.]

Dvd sürücüsünün marka ve modeli bu : TSSTCorp CDDVDW SH-S222A
Resmi sitesinin ne olduğuna dair bilginiz varmı?
Edit : galiba buldum http://www.tsstorage.com/tsst/index_e.html

[kuleyni]

evet sonunda buldum şu adresten güncelleme yapabilirsiniz.
http://www.samsung.com/tr/support/download/supportDown.do?group=&type=&subtype=&model_nm=SH-S222A&dType=D&mType=UM&vType=R&prd_ia_cd=18030100&acc_ia_fl=&disp_nm=SH-S222A%20&menu=download

[Linuxman.]

evet sonunda buldum şu adresten güncelleme yapabilirsiniz.
http://www.samsung.com/tr/support/download/supportDown.do?group=&type=&subtype=&model_nm=SH-S222A&dType=D&mType=UM&vType=R&prd_ia_cd=18030100&acc_ia_fl=&disp_nm=SH-S222A%20&menu=download

Teşekkür ederim peki Firmware güncellemesi için DVD'nin master olması gerçekten gerekli mi ?

[kuleyni]

bu durum biraz karışık ama ayarlarınızınn çakışmadığından eminseniz sorun olmaz diye düşünüyorum.

[Linuxman.]

bu durum biraz karışık ama ayarlarınızınn çakışmadığından eminseniz sorun olmaz diye düşünüyorum.

Firmware güncellemesi yaptım.Fakat Current version ve New Version aynıydı diye hatırlıyorum.Yani pek işe yarayacağını sanmıyorum.
Burası tam olarak yeri değil ama,windowstaki olay görüntüleyicisinde ilginç hatalar var.
DeviceCdRom0 aygıtında bozuk bir blok oluştu.
DeviceIdeIdePort1 aygıtı, zaman aşımı bitiminden önce tepki vermedi. gibi..


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 28 Ağustos 2009 - 17:32:41
Nero ile yazmayı denedim.Fakat yine başarısız oldu.12 X ile yazdırma işlemi başarız.

[kuleyni]

o zaman garanti yolu  gözüktü sanki

[Linuxman.]

o zaman garanti yolu  gözüktü sanki

Cd'ler ile donanım arasında herhangibir uyuşmazlık olabilir mi ?

[kuleyni]

farklı bir marka ile denemeniz lazım çok küçük bi olasılık ama belki olabilir.

[Linuxman.]

farklı bir marka ile denemeniz lazım çok küçük bi olasılık ama belki olabilir.

Başka bir forumda da,jumper ayarlarını kontrol etmemi söylüyorlar.Jumper ayarlarının düzgün olmaması böyle bir sorun çıkartıyor olabilir mi ?

[localhost]

Jumper ayarlari dedikleri master ve slav den olusur. Bir diger konu degisik cd ve DVD lerde yazdirmayi deneyin. Aygit her iki sistem de de yazmiyorsa sorunun büyük kaynagi kendisi olabilir.

[kuleyni]

bildiğim kadarıyla jumper ayarı sayesinde donanımın master veya slave olması sağlanıyor kasanızı açıp  cd sürücünüzün jumperına bakıp master veya slave olduğunu doğrulayıp bağlantı şeklini ona göre değiştirmek çözüm olabilir.

[Linuxman.]

Evet master ve slaveden oluşuyuro.Fakat dvd'nin yazma işlemini gerçekleştirmesi için bu ayarın master veya slave olması bir şey farkeder mi bilmiyorum.Deneyeceğim.
Herkese teşekkürler.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 31 Aralık 1969 - 15:59:59
İlginç bir şey oldu arkadaşlar.Kuzenden aldığım DVD-WRİTER'da jumper yoktu.Bende bozuk olan bir DVD-WRİTER'ın jumperını alarak diğer DVD-WRİTER'a taktım.Ayrı kablolarla,hardiski ve DVD-WR'yi primary ve secondary olmak üzere bağladım.Şuan yazma işlemini deniyorum.



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 29 Ağustos 2009 - 14:35:10
Yine başarısız oldu.