C-Media marka Sd Kart okuyucuya takılı diski göremiyorum

[gnukarabatak]

Sistemim Xubuntu 16.04.2 64 bit. C-Media Electronics, Inc. Mass Storage Controller(0D8C,5200) aygıtına taktığım sd kartı görmüyor. Windows 7 sistemde sürücüsü kurulduğunda kartı disk olarak görüyor ve okuyor. Bu usb portunda bağlı çoklu hafıza kartı okuma aygıtı. Zaten sd kartı taktığımızda kartın bağlandığını gösteren led ışığıda yanmıyor. Ubuntu da sorunu nasıl çözebiliriz?

Kod Seç Genişlet


gnukarabatak@xubuntu1604:~$ lsusb
Bus 002 Device 003: ID 0d8c:5200 C-Media Electronics, Inc. Mass Storage Controller(0D8C,5200)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Kod Seç Genişlet


gnukarabatak@xubuntu1604:~$ lsusb -vs 002:003

Bus 002 Device 003: ID 0d8c:5200 C-Media Electronics, Inc. Mass Storage Controller(0D8C,5200)
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0d8c C-Media Electronics, Inc.
  idProduct          0x5200 Mass Storage Controller(0D8C,5200)
  bcdDevice            1.00
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval               9


Kod Seç Genişlet


gnukarabatak@xubuntu1604:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=6e386ce0-36e8-45c8-aff5-83f4eddb1215 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=0b61efd9-1bf3-4700-8c17-9237239460cf none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0


Kod Seç Genişlet


gnukarabatak@xubuntu1604:~$ sudo fdisk -l
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes




Disk /dev/sda: 186,3 GiB, 200049647616 bytes, 390721968 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000678ca

Aygıt      Açılış     Start       Son   Sektör  Size Id Türü
/dev/sda1  *           2048    718847    716800  350M  7 HPFS/NTFS/exFAT
/dev/sda2            718848 163846143 163127296 77,8G  7 HPFS/NTFS/exFAT
/dev/sda3         163846996 209793023  45946028 21,9G  f W95 Ext'd (LBA)
/dev/sda4         209793024 390721535 180928512 86,3G 83 Linux
/dev/sda5         163846998 205792649  41945652   20G  7 HPFS/NTFS/exFAT
/dev/sda6         205793280 209793023   3999744  1,9G 82 Linux takas / Solaris

Partition table entries are not in disk order.


Kod Seç Genişlet


gnukarabatak@xubuntu1604:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-66-generic (buildd@lgw01-28) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #87-Ubuntu SMP Fri Mar 3 15:29:05 UTC 2017 (Ubuntu 4.4.0-66.87-generic 4.4.44)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-66-generic root=UUID=6e386ce0-36e8-45c8-aff5-83f4eddb1215 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffbffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ffc0000-0x000000007ffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI:          775VM800/775VM800, BIOS P1.50 05/29/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: pci 0000:00:00:00: AGP bridge
[    0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf8000000-0xf9ffffff] (old size 32MB)
[    0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf8000000-0xfbffffff] (64MB, APSIZE 0xf30)
[    0.000000] e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x338aa000-0x35c4cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAA60 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x000000007FFB0000 000030 (v01 A M I  OEMRSDT  05000629 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000007FFB0200 000084 (v02 A M I  OEMFACP  05000629 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000007FFB0400 0037A4 (v01 75V80  75V80000 00000000 INTL 02002026)
[    0.000000] ACPI: FACS 0x000000007FFC0000 000040
[    0.000000] ACPI: APIC 0x000000007FFB0390 00006C (v01 A M I  OEMAPIC  05000629 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x000000007FFC0040 000046 (v01 A M I  AMI_OEM  05000629 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffaffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7ffab000-0x7ffaffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007ffaffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ffaffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffaffff]
[    0.000000] On node 0 totalpages: 524110
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8127 pages used for memmap
[    0.000000]   DMA32 zone: 520112 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007fc00000 s98264 r8192 d28712 u524288
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515898
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-66-generic root=UUID=6e386ce0-36e8-45c8-aff5-83f4eddb1215 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: pci 0000:00:00:00: AGP bridge
[    0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf8000000-0xf9ffffff] (old size 32MB)
[    0.000000] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xf8000000-0xfbffffff] (64MB, APSIZE 0xf30)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2007792K/2096440K available (8452K kernel code, 1293K rwdata, 3980K rodata, 1488K init, 1316K bss, 88648K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3199.848 MHz processor
[    0.004026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.69 BogoMIPS (lpj=12799392)
[    0.004033] pid_max: default: 32768 minimum: 301
[    0.004046] ACPI: Core revision 20150930
[    0.010617] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.010665] Security Framework initialized
[    0.010671] Yama: becoming mindful.
[    0.010726] AppArmor: AppArmor initialized
[    0.011107] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013845] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015645] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015654] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016457] Initializing cgroup subsys io
[    0.016470] Initializing cgroup subsys memory
[    0.016499] Initializing cgroup subsys devices
[    0.016508] Initializing cgroup subsys freezer
[    0.016516] Initializing cgroup subsys net_cls
[    0.016523] Initializing cgroup subsys perf_event
[    0.016530] Initializing cgroup subsys net_prio
[    0.016542] Initializing cgroup subsys hugetlb
[    0.016549] Initializing cgroup subsys pids
[    0.016600] CPU: Physical Processor ID: 0
[    0.016604] CPU: Processor Core ID: 0
[    0.016608] mce: CPU supports 4 MCE banks
[    0.016626] CPU0: Thermal monitoring enabled (TM1)
[    0.016635] process: using mwait in idle threads
[    0.016645] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
[    0.016647] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.017281] Freeing SMP alternatives memory: 32K (ffffffff820b9000 - ffffffff820c1000)
[    0.020585] ftrace: allocating 32123 entries in 126 pages
[    0.036380] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.036387] smpboot: Max logical packages: 4
[    0.037618] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz (family: 0xf, model: 0x4, stepping: 0x3)
[    0.080000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.080000] ... version:                0
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      18
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             0000007fffffffff
[    0.080000] ... fixed-purpose events:   0
[    0.080000] ... event mask:             000000000003ffff
[    0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] x86: Booting SMP configuration:
[    0.080000] .... node  #0, CPUs:      #1
[    0.090810] TSC synchronization [CPU#0 -> CPU#1]:
[    0.090818] Measured 7471183160 cycles TSC warp between CPUs, turning off TSC clock.
[    0.090832] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.090994] x86: Booted up 1 node, 2 CPUs
[    0.091000] smpboot: Total of 2 processors activated (12799.39 BogoMIPS)
[    0.092258] devtmpfs: initialized
[    0.094061] evm: security.selinux
[    0.094065] evm: security.SMACK64
[    0.094066] evm: security.SMACK64EXEC
[    0.094068] evm: security.SMACK64TRANSMUTE
[    0.094069] evm: security.SMACK64MMAP
[    0.094071] evm: security.ima
[    0.094073] evm: security.capability
[    0.096020] PM: Registering ACPI NVS region [mem 0x7ffc0000-0x7ffeffff] (196608 bytes)
[    0.096020] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.096067] pinctrl core: initialized pinctrl subsystem
[    0.096326] RTC time: 12:06:17, date: 04/25/17
[    0.096534] NET: Registered protocol family 16
[    0.104011] cpuidle: using governor ladder
[    0.116005] cpuidle: using governor menu
[    0.116014] PCCT header not found.
[    0.116104] ACPI: bus type PCI registered
[    0.116109] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.116238] PCI: Using configuration type 1 for base access
[    0.132360] ACPI: Added _OSI(Module Device)
[    0.132365] ACPI: Added _OSI(Processor Device)
[    0.132367] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.132369] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134541] ACPI: Executed 1 blocks of module-level executable AML code
[    0.136761] ACPI: Dynamic OEM Table Load:
[    0.136771] ACPI: SSDT 0xFFFF88007CA11400 0002FC (v01 AMI    CPU1PM   00000001 INTL 02002026)
[    0.137153] ACPI: Dynamic OEM Table Load:
[    0.137158] ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0xF1, should be 0x5D (20150930/tbprint-211)
[    0.137166] ACPI: SSDT 0xFFFF88007CA11800 0002FC (v01 AMI    CPU2PM   00000001 INTL 02002026)
[    0.137829] ACPI: Interpreter enabled
[    0.137860] ACPI: (supports S0 S1 S4 S5)
[    0.137863] ACPI: Using IOAPIC for interrupt routing
[    0.137918] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.146907] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.146919] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.146928] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.146944] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.147292] PCI host bridge to bus 0000:00
[    0.147299] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.147302] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.147305] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.147308] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.147311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff window]
[    0.147316] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.147335] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
[    0.147360] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.147537] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
[    0.147706] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
[    0.147870] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
[    0.148038] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
[    0.148200] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
[    0.148367] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.148430] pci 0000:00:01.0: supports D1
[    0.148563] pci 0000:00:0b.0: [1106:3038] type 00 class 0x0c0300
[    0.148625] pci 0000:00:0b.0: reg 0x20: [io  0xb800-0xb81f]
[    0.148670] pci 0000:00:0b.0: supports D1 D2
[    0.148674] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
[    0.148804] pci 0000:00:0b.1: [1106:3038] type 00 class 0x0c0300
[    0.148867] pci 0000:00:0b.1: reg 0x20: [io  0xbc00-0xbc1f]
[    0.148911] pci 0000:00:0b.1: supports D1 D2
[    0.148914] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot
[    0.149047] pci 0000:00:0b.2: [1106:3104] type 00 class 0x0c0320
[    0.149076] pci 0000:00:0b.2: reg 0x10: [mem 0xf7fff400-0xf7fff4ff]
[    0.149154] pci 0000:00:0b.2: supports D1 D2
[    0.149158] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
[    0.149296] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
[    0.149326] pci 0000:00:0f.0: reg 0x10: [io  0xec00-0xec07]
[    0.149338] pci 0000:00:0f.0: reg 0x14: [io  0xe800-0xe803]
[    0.149350] pci 0000:00:0f.0: reg 0x18: [io  0xe400-0xe407]
[    0.149361] pci 0000:00:0f.0: reg 0x1c: [io  0xe000-0xe003]
[    0.149373] pci 0000:00:0f.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.149385] pci 0000:00:0f.0: reg 0x24: [io  0xd800-0xd8ff]
[    0.149535] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.149600] pci 0000:00:0f.1: reg 0x20: [io  0xfc00-0xfc0f]
[    0.149625] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.149628] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.149631] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.149634] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.149785] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.149847] pci 0000:00:10.0: reg 0x20: [io  0xc000-0xc01f]
[    0.149892] pci 0000:00:10.0: supports D1 D2
[    0.149896] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.149959] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.150045] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.150107] pci 0000:00:10.1: reg 0x20: [io  0xc400-0xc41f]
[    0.150153] pci 0000:00:10.1: supports D1 D2
[    0.150156] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.150217] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.150312] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.150373] pci 0000:00:10.2: reg 0x20: [io  0xc800-0xc81f]
[    0.150418] pci 0000:00:10.2: supports D1 D2
[    0.150422] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.150482] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.150566] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.150628] pci 0000:00:10.3: reg 0x20: [io  0xcc00-0xcc1f]
[    0.150673] pci 0000:00:10.3: supports D1 D2
[    0.150676] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.150737] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.150822] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.150851] pci 0000:00:10.4: reg 0x10: [mem 0xf7fff800-0xf7fff8ff]
[    0.150929] pci 0000:00:10.4: supports D1 D2
[    0.150932] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.150989] pci 0000:00:10.4: System wakeup disabled by ACPI
[    0.151086] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.151173] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.151324] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.151353] pci 0000:00:11.5: reg 0x10: [io  0xd000-0xd0ff]
[    0.151436] pci 0000:00:11.5: supports D1 D2
[    0.151563] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.151591] pci 0000:00:12.0: reg 0x10: [io  0xd400-0xd4ff]
[    0.151603] pci 0000:00:12.0: reg 0x14: [mem 0xf7fffc00-0xf7fffcff]
[    0.151674] pci 0000:00:12.0: supports D1 D2
[    0.151677] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.151735] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.151894] pci 0000:01:00.0: [10de:0221] type 00 class 0x030000
[    0.151920] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.151929] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff pref]
[    0.151939] pci 0000:01:00.0: reg 0x18: [mem 0xf5000000-0xf5ffffff]
[    0.151968] pci 0000:01:00.0: reg 0x30: [mem 0xf7ee0000-0xf7efffff pref]
[    0.152100] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.152109] pci 0000:00:01.0:   bridge window [mem 0xf3e00000-0xf7efffff]
[    0.152114] pci 0000:00:01.0:   bridge window [mem 0xd3d00000-0xf3cfffff pref]
[    0.153351] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.153456] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.153558] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.153657] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.153759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.153861] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.153963] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.154066] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.154368] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.154368] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.154368] vgaarb: loaded
[    0.154368] vgaarb: bridge control possible 0000:01:00.0
[    0.154368] SCSI subsystem initialized
[    0.154368] libata version 3.00 loaded.
[    0.154368] ACPI: bus type USB registered
[    0.154368] usbcore: registered new interface driver usbfs
[    0.154368] usbcore: registered new interface driver hub
[    0.154368] usbcore: registered new device driver usb
[    0.154368] PCI: Using ACPI for IRQ routing
[    0.154368] PCI: pci_cache_line_size set to 64 bytes
[    0.154368] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.154368] e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff]
[    0.154368] NetLabel: Initializing
[    0.154368] NetLabel:  domain hash size = 128
[    0.154368] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.154368] NetLabel:  unlabeled traffic allowed by default
[    0.156093] amd_nb: Cannot enumerate AMD northbridges
[    0.156124] clocksource: Switched to clocksource refined-jiffies
[    0.175973] AppArmor: AppArmor Filesystem Enabled
[    0.176174] pnp: PnP ACPI init
[    0.176376] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.176961] pnp 00:01: [dma 2]
[    0.177042] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.177401] pnp 00:02: [dma 3]
[    0.177600] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.178144] system 00:03: [io  0x0295-0x0296] has been reserved
[    0.178149] system 00:03: [io  0x03e0-0x03e7] has been reserved
[    0.178153] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.178157] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.178160] system 00:03: [io  0x0400-0x041f] has been reserved
[    0.178165] system 00:03: [mem 0xfff80000-0xffffffff] has been reserved
[    0.178172] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.178311] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.178316] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.178321] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.178483] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.178786] pnp 00:06: [dma 0 disabled]
[    0.178906] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.179146] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.179151] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.179154] system 00:07: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.179159] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.179396] pnp: PnP ACPI: found 8 devices
[    0.188056] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.188086] clocksource: Switched to clocksource acpi_pm
[    0.188123] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.188133] pci 0000:00:01.0:   bridge window [mem 0xf3e00000-0xf7efffff]
[    0.188139] pci 0000:00:01.0:   bridge window [mem 0xd3d00000-0xf3cfffff pref]
[    0.188149] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.188153] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.188156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.188158] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.188161] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff window]
[    0.188165] pci_bus 0000:01: resource 1 [mem 0xf3e00000-0xf7efffff]
[    0.188167] pci_bus 0000:01: resource 2 [mem 0xd3d00000-0xf3cfffff pref]
[    0.188250] NET: Registered protocol family 2
[    0.188693] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.188904] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.189258] TCP: Hash tables configured (established 16384 bind 16384)
[    0.189434] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.189481] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.189611] NET: Registered protocol family 1
[    0.189657] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.191372] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.191396] pci 0000:01:00.0: Video device with shadowed ROM
[    0.191400] PCI: CLS 32 bytes, default 64
[    0.191527] Trying to unpack rootfs image as initramfs...
[    1.232988] Freeing initrd memory: 36492K (ffff8800338aa000 - ffff880035c4d000)
[    1.233261] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1fba56f8f, max_idle_ns: 440795234464 ns
[    1.233452] Scanning for low memory corruption every 60 seconds
[    1.234271] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.234391] audit: initializing netlink subsys (disabled)
[    1.234453] audit: type=2000 audit(1493121978.231:1): initialized
[    1.234963] Initialise system trusted keyring
[    1.235269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.239207] zbud: loaded
[    1.239600] VFS: Disk quotas dquot_6.6.0
[    1.239681] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.240378] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.240877] fuse init (API version 7.23)
[    1.241203] Key type big_key registered
[    1.241234] Allocating IMA MOK and blacklist keyrings.
[    1.242034] Key type asymmetric registered
[    1.242042] Asymmetric key parser 'x509' registered
[    1.242132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.242206] io scheduler noop registered
[    1.242212] io scheduler deadline registered (default)
[    1.242287] io scheduler cfq registered
[    1.242563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.242578] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.242820] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.242829] ACPI: Power Button [PWRB]
[    1.242921] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.242925] ACPI: Power Button [PWRF]
[    1.243245] GHES: HEST is not enabled!
[    1.243449] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.263894] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.267154] Linux agpgart interface v0.103
[    1.267258] agpgart: Detected VIA VT3314 chipset
[    1.272620] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    1.278449] brd: module loaded
[    1.281318] loop: module loaded
[    1.281875] libphy: Fixed MDIO Bus: probed
[    1.281882] tun: Universal TUN/TAP device driver, 1.6
[    1.281884] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.281979] PPP generic driver version 2.4.2
[    1.282122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.282133] ehci-pci: EHCI PCI platform driver
[    1.282410] ehci-pci 0000:00:0b.2: EHCI Host Controller
[    1.282424] ehci-pci 0000:00:0b.2: new USB bus registered, assigned bus number 1
[    1.282518] ehci-pci 0000:00:0b.2: irq 17, io mem 0xf7fff400
[    1.292027] ehci-pci 0000:00:0b.2: USB 2.0 started, EHCI 1.00
[    1.292118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.292122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.292125] usb usb1: Product: EHCI Host Controller
[    1.292128] usb usb1: Manufacturer: Linux 4.4.0-66-generic ehci_hcd
[    1.292130] usb usb1: SerialNumber: 0000:00:0b.2
[    1.292366] hub 1-0:1.0: USB hub found
[    1.292379] hub 1-0:1.0: 4 ports detected
[    1.292783] ehci-pci 0000:00:10.4: EHCI Host Controller
[    1.292794] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2
[    1.292855] ehci-pci 0000:00:10.4: irq 21, io mem 0xf7fff800
[    1.304032] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.304124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.304128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.304131] usb usb2: Product: EHCI Host Controller
[    1.304133] usb usb2: Manufacturer: Linux 4.4.0-66-generic ehci_hcd
[    1.304136] usb usb2: SerialNumber: 0000:00:10.4
[    1.304354] hub 2-0:1.0: USB hub found
[    1.304367] hub 2-0:1.0: 8 ports detected
[    1.304725] ehci-platform: EHCI generic platform driver
[    1.304749] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.304758] ohci-pci: OHCI PCI platform driver
[    1.304792] ohci-platform: OHCI generic platform driver
[    1.304811] uhci_hcd: USB Universal Host Controller Interface driver
[    1.304966] uhci_hcd 0000:00:0b.0: UHCI Host Controller
[    1.304977] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3
[    1.304986] uhci_hcd 0000:00:0b.0: detected 2 ports
[    1.305028] uhci_hcd 0000:00:0b.0: irq 19, io base 0x0000b800
[    1.305122] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.305126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.305129] usb usb3: Product: UHCI Host Controller
[    1.305131] usb usb3: Manufacturer: Linux 4.4.0-66-generic uhci_hcd
[    1.305134] usb usb3: SerialNumber: 0000:00:0b.0
[    1.305341] hub 3-0:1.0: USB hub found
[    1.305358] hub 3-0:1.0: 2 ports detected
[    1.305665] uhci_hcd 0000:00:0b.1: UHCI Host Controller
[    1.305674] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4
[    1.305682] uhci_hcd 0000:00:0b.1: detected 2 ports
[    1.305722] uhci_hcd 0000:00:0b.1: irq 16, io base 0x0000bc00
[    1.305816] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.305820] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.305822] usb usb4: Product: UHCI Host Controller
[    1.305825] usb usb4: Manufacturer: Linux 4.4.0-66-generic uhci_hcd
[    1.305827] usb usb4: SerialNumber: 0000:00:0b.1
[    1.306046] hub 4-0:1.0: USB hub found
[    1.306063] hub 4-0:1.0: 2 ports detected
[    1.306347] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.306357] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[    1.306367] uhci_hcd 0000:00:10.0: detected 2 ports
[    1.306387] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
[    1.306476] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.306480] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.306483] usb usb5: Product: UHCI Host Controller
[    1.306485] usb usb5: Manufacturer: Linux 4.4.0-66-generic uhci_hcd
[    1.306487] usb usb5: SerialNumber: 0000:00:10.0
[    1.306687] hub 5-0:1.0: USB hub found
[    1.306699] hub 5-0:1.0: 2 ports detected
[    1.307013] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.307024] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[    1.307033] uhci_hcd 0000:00:10.1: detected 2 ports
[    1.307054] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
[    1.307140] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.307144] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.307147] usb usb6: Product: UHCI Host Controller
[    1.307149] usb usb6: Manufacturer: Linux 4.4.0-66-generic uhci_hcd
[    1.307151] usb usb6: SerialNumber: 0000:00:10.1
[    1.307360] hub 6-0:1.0: USB hub found
[    1.307372] hub 6-0:1.0: 2 ports detected
[    1.307651] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.307661] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
[    1.307671] uhci_hcd 0000:00:10.2: detected 2 ports
[    1.307696] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
[    1.307789] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.307792] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.307795] usb usb7: Product: UHCI Host Controller
[    1.307797] usb usb7: Manufacturer: Linux 4.4.0-66-generic uhci_hcd
[    1.307800] usb usb7: SerialNumber: 0000:00:10.2
[    1.308022] hub 7-0:1.0: USB hub found
[    1.308039] hub 7-0:1.0: 2 ports detected
[    1.308356] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.308371] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8
[    1.308380] uhci_hcd 0000:00:10.3: detected 2 ports
[    1.308401] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
[    1.308488] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.308492] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.308495] usb usb8: Product: UHCI Host Controller
[    1.308497] usb usb8: Manufacturer: Linux 4.4.0-66-generic uhci_hcd
[    1.308499] usb usb8: SerialNumber: 0000:00:10.3
[    1.308713] hub 8-0:1.0: USB hub found
[    1.308725] hub 8-0:1.0: 2 ports detected
[    1.309007] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    1.309010] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    1.309562] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.309571] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.309904] mousedev: PS/2 mouse device common for all mice
[    1.310217] rtc_cmos 00:00: RTC can wake from S4
[    1.310470] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.310521] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[    1.310538] i2c /dev entries driver
[    1.310674] device-mapper: uevent: version 1.0.3
[    1.310834] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.310870] ledtrig-cpu: registered to indicate activity on CPUs
[    1.311611] NET: Registered protocol family 10
[    1.312036] NET: Registered protocol family 17
[    1.312066] Key type dns_resolver registered
[    1.312436] microcode: CPU0 sig=0xf43, pf=0x10, revision=0x5
[    1.312450] microcode: CPU1 sig=0xf43, pf=0x10, revision=0x5
[    1.312525] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.312854] registered taskstats version 1
[    1.312882] Loading compiled-in X.509 certificates
[    1.314332] Loaded X.509 cert 'Build time autogenerated kernel key: 32ca4feee90b5cde51f5f8c0e024b22f8c679982'
[    1.314366] zswap: loaded using pool lzo/zbud
[    1.318507] Key type trusted registered
[    1.325275] Key type encrypted registered
[    1.325292] AppArmor: AppArmor sha1 policy hashing enabled
[    1.325300] ima: No TPM chip found, activating TPM-bypass!
[    1.325345] evm: HMAC attrs: 0x1
[    1.325828]   Magic number: 13:203:128
[    1.325953] acpi PNP0C02:00: hash matches
[    1.325963] acpi device:03: hash matches
[    1.326042] rtc_cmos 00:00: setting system clock to 2017-04-25 12:06:18 UTC (1493121978)
[    1.326937] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.326940] EDD information not available.
[    1.327042] PM: Hibernation image not present or could not be loaded.
[    1.331228] Freeing unused kernel memory: 1488K (ffffffff81f45000 - ffffffff820b9000)
[    1.331233] Write protecting the kernel read-only data: 14336k
[    1.334746] Freeing unused kernel memory: 1776K (ffff880001844000 - ffff880001a00000)
[    1.335398] Freeing unused kernel memory: 116K (ffff880001de3000 - ffff880001e00000)
[    1.358781] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.359052] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.359097] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.360900] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.361006] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.361348] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.361482] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.361607] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.361732] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.361865] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.456807] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.461205] Floppy drive(s): fd0 is 1.44M
[    1.465628] sata_via 0000:00:0f.0: version 2.6
[    1.465959] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.469324] scsi host0: sata_via
[    1.471393] scsi host1: sata_via
[    1.471544] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[    1.471549] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[    1.471692] pata_via 0000:00:0f.1: version 0.3.4
[    1.478583] FDC 0 is a post-1991 82077
[    1.481018] scsi host2: pata_via
[    1.481264] scsi host3: pata_via
[    1.481399] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.481404] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.486235] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    1.487033] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xffffc900003c6c00, 00:13:8f:4e:d6:d2, IRQ 23
[    1.487811] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link c5e1
[    1.568439] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
[    1.672038] usb 2-7: new high-speed USB device number 3 using ehci-pci
[    1.672042] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.683411] ata3.00: ATA-7: ST3200827A, 3.AAH, max UDMA/100
[    1.683416] ata3.00: 390721968 sectors, multi 16: LBA48
[    1.683424] ata3.00: limited to UDMA/33 due to 40-wire cable
[    1.748032] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[    1.749990] ata3.00: configured for UDMA/33
[    1.804343] usb 2-7: New USB device found, idVendor=0d8c, idProduct=5200
[    1.804347] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.884031] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.895081] scsi 2:0:0:0: Direct-Access     ATA      ST3200827A       H    PQ: 0 ANSI: 5
[    1.895658] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    1.895791] sd 2:0:0:0: [sda] Write Protect is off
[    1.895801] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.895861] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.895876] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.930086] usb 7-2: New USB device found, idVendor=045e, idProduct=00db
[    1.930092] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.930096] usb 7-2: Product: Natural® Ergonomic Keyboard 4000
[    1.930099] usb 7-2: Manufacturer: Microsoft
[    1.941737] hidraw: raw HID events driver (C) Jiri Kosina
[    1.945641]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[    1.948232] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.978216] usbcore: registered new interface driver usbhid
[    1.978221] usbhid: USB HID core driver
[    1.982535] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:10.2/usb7/7-2/7-2:1.0/0003:045E:00DB.0001/input/input5
[    2.036262] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:10.2-2/input0
[    2.040460] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:10.2/usb7/7-2/7-2:1.1/0003:045E:00DB.0002/input/input6
[    2.096315] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:10.2-2/input1
[    2.677782] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    3.622681] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    4.203531] random: nonblocking pool is initialized
[    5.081699] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.081924] systemd[1]: Detected architecture x86-64.
[    5.093416] systemd[1]: Set hostname to <xubuntu1604>.
[    7.591544] systemd[1]: Created slice User and Session Slice.
[    7.591639] systemd[1]: Reached target Remote File Systems (Pre).
[    7.591744] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.591774] systemd[1]: Reached target Encrypted Volumes.
[    7.592100] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.592183] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.592277] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.592439] systemd[1]: Created slice System Slice.
[    7.592479] systemd[1]: Reached target Slices.
[    7.592629] systemd[1]: Listening on Journal Audit Socket.
[    7.592669] systemd[1]: Reached target Remote File Systems.
[    7.592699] systemd[1]: Reached target User and Group Name Lookups.
[    7.592777] systemd[1]: Listening on udev Control Socket.
[    7.592830] systemd[1]: Listening on udev Kernel Socket.
[    7.592885] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.592981] systemd[1]: Listening on Journal Socket.
[    7.608415] systemd[1]: Started Read required files in advance.
[    7.700386] systemd[1]: Starting Load Kernel Modules...
[    7.702162] systemd[1]: Starting Uncomplicated firewall...
[    7.704126] systemd[1]: Started Braille Device Support.
[    7.848439] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.849951] systemd[1]: Mounting Debug File System...
[    7.852566] systemd[1]: Starting Nameserver information manager...
[    7.854550] systemd[1]: Starting Set console keymap...
[    7.862044] systemd[1]: Mounting POSIX Message Queue File System...
[    7.864584] systemd[1]: Mounting Huge Pages File System...
[    7.864890] systemd[1]: Listening on Syslog Socket.
[    7.867152] systemd[1]: Starting Journal Service...
[    8.340608] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.356550] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.410031] systemd[1]: Started Uncomplicated firewall.
[    8.665794] systemd[1]: Mounted POSIX Message Queue File System.
[    8.665905] systemd[1]: Mounted Huge Pages File System.
[    8.667644] systemd[1]: Mounted Debug File System.
[    8.820781] lp: driver loaded but no devices found
[    8.900533] systemd[1]: Started Nameserver information manager.
[    8.905008] ppdev: user-space parallel port driver
[    9.028754] parport_pc 00:02: reported by Plug and Play ACPI
[    9.028874] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    9.124269] lp0: using parport0 (interrupt-driven).
[    9.225364] systemd[1]: Started Load Kernel Modules.
[    9.236568] systemd[1]: Starting Apply Kernel Variables...
[    9.239998] systemd[1]: Mounting FUSE Control File System...
[    9.250410] systemd[1]: Mounted FUSE Control File System.
[    9.332987] systemd[1]: Started Journal Service.
[   12.901651] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[   13.337696] systemd-journald[229]: Received request to flush runtime journal from PID 1
[   14.911994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.044361] [drm] Initialized drm 1.1.0 20060810
[   16.092921] MPU-401 device not found or device busy
[   17.122785] snd_via82xx 0000:00:11.5: Using DXS as PCM Playback
[   20.145957] nvidia: module license 'NVIDIA' taints kernel.
[   20.145966] Disabling lock debugging due to kernel taint
[   20.191844] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   20.207861] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   20.208853] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[   20.208870] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.134  Fri Dec  9 11:30:02 PST 2016
[   20.536531] audit: type=1400 audit(1493121997.707:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=532 comm="apparmor_parser"
[   20.536570] audit: type=1400 audit(1493121997.707:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser"
[   20.536590] audit: type=1400 audit(1493121997.707:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=532 comm="apparmor_parser"
[   20.536605] audit: type=1400 audit(1493121997.707:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=532 comm="apparmor_parser"
[   20.677182] audit: type=1400 audit(1493121997.847:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=531 comm="apparmor_parser"
[   20.677216] audit: type=1400 audit(1493121997.847:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=531 comm="apparmor_parser"
[   20.844182] audit: type=1400 audit(1493121998.015:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=593 comm="apparmor_parser"
[   20.844205] audit: type=1400 audit(1493121998.015:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=593 comm="apparmor_parser"
[   21.277487] audit: type=1400 audit(1493121998.447:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=619 comm="apparmor_parser"
[   21.731758] audit: type=1400 audit(1493121998.899:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=665 comm="apparmor_parser"
[   23.429819] Adding 1999868k swap on /dev/sda6.  Priority:-1 extents:1 across:1999868k FS
[   35.472643] IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
[   39.873326] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   39.873348] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[   39.873422] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[  407.708933] blk_update_request: I/O error, dev fd0, sector 0
[  407.708951] floppy: error -5 while reading block 0
[  419.880458] blk_update_request: I/O error, dev fd0, sector 0
[  419.880470] floppy: error -5 while reading block 0
[  525.276438] blk_update_request: I/O error, dev fd0, sector 0
[  525.276453] floppy: error -5 while reading block 0


[fsutil]

Kod Seç Genişlet

sudo apt-get install --reinstall udisks2

Daha sonra bilgisayarı yeniden başlatıp tekrar deneyin

[gnukarabatak]

malesef hiçbir tepki yok. fdisk -l yaptım bağlanılabilir diskler arasında da yok. sadece sabit diskimin bölümleri gözüküyor. Windows c-media driver kiti kurulmuş olduğunda sd kartı c-media sd kart okuyucuya takar takmaz hemen disk bağlandı ışığı yanıyor. Ancak bu tarafta öyle bir olay görünmüyor. Sadece lsusb komutu ile c-media aygıtının gördüğünden başka bir elde ettiğimiz veri yok.

[ata1]

Kod Seç Genişlet

udisks2 gvfs-afc gvfs-mtp gvfs-gphoto2
şunları kurarak bir dene, ayrıca gparted ile disk görünüyor mu bakınız.

[gnukarabatak]

Kod Seç Genişlet


gnukarabatak@xubuntu-775VM800:~$ udisks2 gvfs-afc gvfs-mtp gvfs-gphoto2
udisks2: komut bulunamadı

Bu mesajı verince yukardaki komutu tekrar uyguladım

Kod Seç Genişlet


gnukarabatak@xubuntu-775VM800:~$ sudo apt-get install --reinstall udisks2
[sudo] password for gnukarabatak:
Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
Aşağıdaki paket otomatik olarak kurulmuş ve artık bu pakete gerek duyulmuyor:
  snap-confine
Bu paketi kaldırmak için 'sudo apt autoremove' komutunu kullanın.
0 paket yükseltilecek, 0 yeni paket kurulacak, 1 paket yeniden kurulacak, 0 paket kaldırılacak ve 9 paket yükseltilmeyecek.
0 B/183 kB arşiv dosyası indirilecek.
Bu işlem tamamlandıktan sonra 0 B ek disk alanı kullanılacak.
(Veritabanı okunuyor ... 230489 dosya veya dizin kurulu durumda.)
Paket açılacak: .../udisks2_2.1.7-1ubuntu1_amd64.deb ...
Paket açılıyor: udisks2 (2.1.7-1ubuntu1) üzerine (2.1.7-1ubuntu1) ...
Tetikleyiciler işleniyor: dbus (1.10.6-1ubuntu3.3) ...
Tetikleyiciler işleniyor: man-db (2.7.5-1) ...
Ayarlanıyor: udisks2 (2.1.7-1ubuntu1) ...


Fakat ilk mesajı yine verdi. Gparted ile baktığımda da sd disk gözükmüyor. Zanen diski algıladığında yanması gereken led yanmıyor.

Ek olarak şu da sistemden görülebiliyor :

Kod Seç Genişlet


gnukarabatak@xubuntu-775VM800:~$ dpkg -L udisks2 | grep bin/
/usr/bin/udisksctl
/sbin/umount.udisks2


[ata1]

Kod Seç Genişlet

dmesg | tail -n 40

Kartı çıkartın,

Kod Seç Genişlet

sudo modprobe rtsx_usb

komutu ardından tekrar takın,

[gnukarabatak]

Kod Seç Genişlet


gnukarabatak@xubuntu-775VM800:~$ dmesg | tail -n 40
[    6.770240] systemd[1]: Listening on Journal Socket.
[    6.770579] systemd[1]: Created slice System Slice.
[    6.812423] systemd[1]: Starting Load Kernel Modules...
[    6.812788] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.814339] systemd[1]: Starting Uncomplicated firewall...
[    6.816181] systemd[1]: Mounting POSIX Message Queue File System...
[    6.818088] systemd[1]: Started Braille Device Support.
[    7.744989] lp: driver loaded but no devices found
[    7.791060] ppdev: user-space parallel port driver
[    7.853090] parport_pc 00:02: reported by Plug and Play ACPI
[    7.853208] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    7.948285] lp0: using parport0 (interrupt-driven).
[   11.109458] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[   11.468298] systemd-journald[238]: Received request to flush runtime journal from PID 1
[   13.039393] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.815861] [drm] Initialized drm 1.1.0 20060810
[   14.168091] MPU-401 device not found or device busy
[   14.822494] snd_via82xx 0000:00:11.5: Using DXS as PCM Playback
[   17.818773] nvidia: loading out-of-tree module taints kernel.
[   17.818788] nvidia: module license 'NVIDIA' taints kernel.
[   17.818790] Disabling lock debugging due to kernel taint
[   17.862941] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   17.878739] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   17.879845] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[   17.879862] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.135  Tue Jan 17 15:26:26 PST 2017
[   18.489429] audit: type=1400 audit(1493589606.567:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=562 comm="apparmor_parser"
[   18.489457] audit: type=1400 audit(1493589606.567:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=562 comm="apparmor_parser"
[   18.489471] audit: type=1400 audit(1493589606.567:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=562 comm="apparmor_parser"
[   18.489484] audit: type=1400 audit(1493589606.567:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=562 comm="apparmor_parser"
[   18.744444] audit: type=1400 audit(1493589606.823:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=561 comm="apparmor_parser"
[   18.744470] audit: type=1400 audit(1493589606.823:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=561 comm="apparmor_parser"
[   18.842103] audit: type=1400 audit(1493589606.919:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=571 comm="apparmor_parser"
[   18.842131] audit: type=1400 audit(1493589606.919:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=571 comm="apparmor_parser"
[   18.934449] audit: type=1400 audit(1493589607.011:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=579 comm="apparmor_parser"
[   19.362500] audit: type=1400 audit(1493589607.439:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=581 comm="apparmor_parser"
[   20.967156] Adding 1999868k swap on /dev/sda6.  Priority:-1 extents:1 across:1999868k FS
[   31.376198] IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
[   40.122866] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   40.122890] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[   40.122963] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode


Ardından

Kod Seç Genişlet


sudo modprobe rtsx_usb

uygulayıp kartı taktığımda herhangi bir tepki olmadı ve gpartedda da görünmedi.

[ata1]

Tek seçenek kernel değişmek gibi görünüyor. Fakat konuda deneyimli arkadaşlardan yorum bekleyin.

[guestwho]

Şu 2 çekirdek modülünü sırayla yüklemeyi deneyelim:

Kod Seç Genişlet

sudo modprobe tifm_sd
sudo modprobe mmc_block

Ardından şu dmesg çıktısına bir bakalım:

Kod Seç Genişlet

dmesg | tail -n 50

[gnukarabatak]

Kod Seç Genişlet


dmesg | tail -n 50
[    2.332666] random: fast init done
[    2.448042] usb 2-7: new high-speed USB device number 3 using ehci-pci
[    2.604457] usb 2-7: New USB device found, idVendor=0d8c, idProduct=5200
[    2.604461] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.785115] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    6.204778] random: crng init done
[    6.820503] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    8.226463] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.226707] systemd[1]: Detected architecture x86-64.
[    8.232738] systemd[1]: Set hostname to <xubuntu-775VM800>.
[    9.836200] systemd[1]: Reached target Remote File Systems (Pre).
[    9.836383] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.836680] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.836715] systemd[1]: Reached target Remote File Systems.
[    9.836935] systemd[1]: Created slice System Slice.
[    9.837045] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.837199] systemd[1]: Listening on Journal Audit Socket.
[   10.861779] lp: driver loaded but no devices found
[   10.924702] ppdev: user-space parallel port driver
[   10.994874] parport_pc 00:02: reported by Plug and Play ACPI
[   10.994993] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   11.092260] lp0: using parport0 (interrupt-driven).
[   14.034673] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[   14.388786] systemd-journald[235]: Received request to flush runtime journal from PID 1
[   15.837487] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.680298] [drm] Initialized drm 1.1.0 20060810
[   17.001685] MPU-401 device not found or device busy
[   17.546458] snd_via82xx 0000:00:11.5: Using DXS as PCM Playback
[   20.985301] nvidia: loading out-of-tree module taints kernel.
[   20.985316] nvidia: module license 'NVIDIA' taints kernel.
[   20.985318] Disabling lock debugging due to kernel taint
[   21.030514] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   21.047376] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   21.048393] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[   21.048411] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.135  Tue Jan 17 15:26:26 PST 2017
[   21.964406] audit: type=1400 audit(1493918046.043:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=567 comm="apparmor_parser"
[   21.964432] audit: type=1400 audit(1493918046.043:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=567 comm="apparmor_parser"
[   21.964444] audit: type=1400 audit(1493918046.043:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=567 comm="apparmor_parser"
[   21.964456] audit: type=1400 audit(1493918046.043:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=567 comm="apparmor_parser"
[   22.052494] audit: type=1400 audit(1493918046.131:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=566 comm="apparmor_parser"
[   22.052521] audit: type=1400 audit(1493918046.131:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=566 comm="apparmor_parser"
[   22.158366] audit: type=1400 audit(1493918046.235:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=571 comm="apparmor_parser"
[   22.158392] audit: type=1400 audit(1493918046.235:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=571 comm="apparmor_parser"
[   22.296434] audit: type=1400 audit(1493918046.375:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=579 comm="apparmor_parser"
[   22.762218] audit: type=1400 audit(1493918046.839:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=581 comm="apparmor_parser"
[   24.275094] Adding 1999868k swap on /dev/sda6.  Priority:-1 extents:1 across:1999868k FS
[   37.957956] IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
[   47.617215] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   47.617251] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[   47.617350] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode


[guestwho]

Şu komutların çıktılarını da alabilir miyim ?

Kod Seç Genişlet

lsmod | grep -i usb-storage
udisksctl status
ls /dev/mmc*


"/dev/mmcblk0p1" diye bir aygıt dosyası oluşturuluyor mu ? Bir de şunu sorayım; Windows tarafında bu SD kart okuyucusunu taktıktan kaç saniye sonra ledin yandığını görüyorsun ?

[gnukarabatak]

Alttaki ilk komutun çıktısı boş.

Kod Seç Genişlet


gnukarabatak@xubuntu-775VM800:~$ lsmod | grep -i usb-storage
gnukarabatak@xubuntu-775VM800:~$ udisksctl status
MODEL                     REVISION  SERIAL               DEVICE
--------------------------------------------------------------------------
ST3200827A                3.AAH     5ND57JTY             sda     
gnukarabatak@xubuntu-775VM800:~$ sudo ls /dev/mmc*
ls: '/dev/mmc*''e erişilemedi: Böyle bir dosya ya da dizin yok
d

Kod Seç Genişlet


gnukarabatak@xubuntu-775VM800:~$ sudo ls /dev/mmcblk0p1
ls: '/dev/mmcblk0p1''e erişilemedi: Böyle bir dosya ya da dizin yok


ek olarak aşağıdaki çıktıyıda vereyim.

Kod Seç Genişlet


gnukarabatak@xubuntu-775VM800:~$ sudo ls /dev/*
/dev/agpgart       /dev/loop3        /dev/rtc0      /dev/tty17  /dev/tty38  /dev/tty59      /dev/ttyS20   /dev/vcs
/dev/autofs       /dev/loop4        /dev/sda       /dev/tty18  /dev/tty39  /dev/tty6       /dev/ttyS21   /dev/vcs1
/dev/btrfs-control    /dev/loop5        /dev/sda1      /dev/tty19  /dev/tty4   /dev/tty60      /dev/ttyS22   /dev/vcs2
/dev/console       /dev/loop6        /dev/sda2      /dev/tty2   /dev/tty40  /dev/tty61      /dev/ttyS23   /dev/vcs3
/dev/core       /dev/loop7        /dev/sda3      /dev/tty20  /dev/tty41  /dev/tty62      /dev/ttyS24   /dev/vcs4
/dev/cpu_dma_latency  /dev/loop-control        /dev/sda4      /dev/tty21  /dev/tty42  /dev/tty63      /dev/ttyS25   /dev/vcs5
/dev/cuse       /dev/lp0        /dev/sda5      /dev/tty22  /dev/tty43  /dev/tty7       /dev/ttyS26   /dev/vcs6
/dev/ecryptfs       /dev/mcelog        /dev/sda6      /dev/tty23  /dev/tty44  /dev/tty8       /dev/ttyS27   /dev/vcs7
/dev/full       /dev/mem        /dev/sg0       /dev/tty24  /dev/tty45  /dev/tty9       /dev/ttyS28   /dev/vcsa
/dev/fuse       /dev/memory_bandwidth    /dev/snapshot  /dev/tty25  /dev/tty46  /dev/ttyprintk  /dev/ttyS29   /dev/vcsa1
/dev/hidraw0       /dev/network_latency     /dev/stderr    /dev/tty26  /dev/tty47  /dev/ttyS0      /dev/ttyS3    /dev/vcsa2
/dev/hidraw1       /dev/network_throughput  /dev/stdin     /dev/tty27  /dev/tty48  /dev/ttyS1      /dev/ttyS30   /dev/vcsa3
/dev/hpet       /dev/null        /dev/stdout    /dev/tty28  /dev/tty49  /dev/ttyS10     /dev/ttyS31   /dev/vcsa4
/dev/hwrng       /dev/nvidia0        /dev/tty       /dev/tty29  /dev/tty5   /dev/ttyS11     /dev/ttyS4    /dev/vcsa5
/dev/i2c-0       /dev/nvidiactl        /dev/tty0      /dev/tty3   /dev/tty50  /dev/ttyS12     /dev/ttyS5    /dev/vcsa6
/dev/i2c-1       /dev/parport0        /dev/tty1      /dev/tty30  /dev/tty51  /dev/ttyS13     /dev/ttyS6    /dev/vcsa7
/dev/i2c-2       /dev/port        /dev/tty10     /dev/tty31  /dev/tty52  /dev/ttyS14     /dev/ttyS7    /dev/vga_arbiter
/dev/initctl       /dev/ppp        /dev/tty11     /dev/tty32  /dev/tty53  /dev/ttyS15     /dev/ttyS8    /dev/vhci
/dev/kmsg       /dev/psaux        /dev/tty12     /dev/tty33  /dev/tty54  /dev/ttyS16     /dev/ttyS9    /dev/vhost-net
/dev/log       /dev/ptmx        /dev/tty13     /dev/tty34  /dev/tty55  /dev/ttyS17     /dev/uhid     /dev/zero
/dev/loop0       /dev/random        /dev/tty14     /dev/tty35  /dev/tty56  /dev/ttyS18     /dev/uinput
/dev/loop1       /dev/rfkill        /dev/tty15     /dev/tty36  /dev/tty57  /dev/ttyS19     /dev/urandom
/dev/loop2       /dev/rtc        /dev/tty16     /dev/tty37  /dev/tty58  /dev/ttyS2      /dev/userio

/dev/block:
7:0  7:1  7:2  7:3  7:4  7:5  7:6  7:7 8:0  8:1  8:2  8:3  8:4  8:5  8:6

/dev/bsg:
2:0:0:0

/dev/bus:
usb

/dev/char:
10:1 10:235 10:63 116:6  1:5 189:640  4:0   4:18  4:27  4:36  4:45  4:54  4:63  4:72  4:81  4:90  6:0    7:135  99:0
10:175 10:236 108:0 1:3    1:7 189:768  4:1   4:19  4:28  4:37  4:46  4:55  4:64  4:73  4:82  4:91  7:0    7:2
10:183 10:237 1:1 13:32  1:8 189:896  4:10  4:2   4:29  4:38  4:47  4:56  4:65  4:74  4:83  4:92  7:1    7:3
10:184 10:56 1:11 13:63  189:0 1:9 4:11  4:20  4:3   4:39  4:48  4:57  4:66  4:75  4:84  4:93  7:128  7:4
10:200 10:57 116:1 13:64  189:128 21:0 4:12  4:21  4:30  4:4 4:49  4:58  4:67  4:76  4:85  4:94  7:129  7:5
10:223 10:58 116:2 13:65  189:130 226:0 4:13  4:22  4:31  4:40  4:5   4:59  4:68  4:77  4:86  4:95  7:130  7:6
10:227 10:59 116:3 13:66  189:256 247:0 4:14  4:23  4:32  4:41  4:50  4:6   4:69  4:78  4:87  5:0   7:131  7:7
10:228 10:60 116:33 13:67  189:384 247:1 4:15  4:24  4:33  4:42  4:51  4:60  4:7   4:79  4:88  5:1   7:132  89:0
10:229 10:61 116:4 13:68  189:512 248:0 4:16  4:25  4:34  4:43  4:52  4:61  4:70  4:8 4:89  5:2   7:133  89:1
10:231 10:62 116:5 1:4    189:513 250:0 4:17  4:26  4:35  4:44  4:53  4:62  4:71  4:80  4:9   5:3   7:134  89:2

/dev/cpu:
microcode

/dev/disk:
by-id  by-label  by-path  by-uuid

/dev/dri:
card0

/dev/fd:
0  1  2  3

/dev/hugepages:

/dev/input:
by-id  by-path event0 event1 event2 event3 event4 mice  mouse0

/dev/lightnvm:
control

/dev/mapper:
control

/dev/mqueue:

/dev/net:
tun

/dev/pts:
0  1  3  4  5  6  ptmx

/dev/shm:
pulse-shm-1979726862  pulse-shm-2037845255  pulse-shm-223809298  pulse-shm-3752049046  pulse-shm-4006054516

/dev/snd:
by-path  controlC0  pcmC0D0c  pcmC0D0p pcmC0D1c  pcmC0D1p  seq  timer

/dev/vfio:
vfio


Gördüğünüz üzere dev dizini altında mmc ile başlayan hiçbir şey yok. Windowstayken sdkartı taktıktan 1 sn sonra led ışığı yanıyor ve ekranda bu sd kartı ne yapmak istediğimi falan soruyor. Fakat ubuntuda  hiçbir tepki vermiyor. Daha doğrusu bu sd kart çoklu okuma aygıtı sd kart takıldığını hissedemiyor.