Dark Rangemax duo 15 (ralinkt rt3072) usb wifi adaptör sorunu

[EruimdaS]

Merhabalar,

Bir süredir usb wifi adaptörümü ubuntu 16.04'ün görmesi için uğraşıyorum ama bir türlü kullanamadım. Sürekli olarak Device not managed olarak görünüyor, ve az önceki uğraşlarım sonucunda artık bir süre cihazı görüyorum sonrasında ise kayboluyor. Yardımlarınızı bekliyorum. Şimdiden teşekkürler.

Kod Seç Genişlet

$cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LTS"


Kod Seç Genişlet

$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.4.0-51-generic.efi.signed root=UUID=f6a7bc68-b616-4fa0-b9b9-f1f675c7b8d8 ro quiet splash vt.handoff=7


Kod Seç Genişlet

$ uname -a
Linux HhkCrazy 4.4.0-51-generic #72-Ubuntu SMP Thu Nov 24 18:29:54 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Kod Seç Genişlet

$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 745M] (rev a1)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)

lsusb çıkışını cihaz bağlıyken alamadım bir türlü, herhangi bir şekilde terminalde bir şey görünmedi. Ayrıca cihaz bağlıyken bilgisayarı kapatamıyorum da cihaza ulaşamadığını söyleyen bir terminal ekranı görünüyor sadece, mauel olarak zorla kapatmak durumunda kalıyorum. Aşağıdaki lsusb kodu cihaz bilgisayara bağlı değilken aldığım çıktıdır.

Kod Seç Genişlet

$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 006: ID 13d3:3394 IMC Networks Bluetooth
Bus 003 Device 003: ID 046d:c246 Logitech, Inc. Gaming Mouse G300
Bus 003 Device 007: ID 0bda:570b Realtek Semiconductor Corp.
Bus 003 Device 002: ID 04e8:689e Samsung Electronics Co., Ltd GT-S5670 [Galaxy Fit]
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


cihazı tekrar taktım.

Kod Seç Genişlet

$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no

Kod Seç Genişlet

$ sudo lshw -C network
  *-network               
       description: Wireless interface
       product: RTL8723AE PCIe Wireless Network Adapter
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: wlp3s0
       version: 00
       serial: 24:0a:64:b6:86:0e
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=rtl8723ae driverversion=4.4.0-51-generic firmware=N/A ip=192.168.43.118 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
       resources: irq:18 ioport:d000(size=256) memory:f7900000-f7903fff
  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:04:00.0
       logical name: enp4s0
       version: 0c
       serial: 54:be:f7:57:8f:bd
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:29 ioport:c000(size=256) memory:f7800000-f7800fff memory:f2100000-f2103fff


Daha sonra ifconfig komutunu tekrar denediğimde sonda görülen "wlx000c0b470f52:" kısmı kayboldu.

Kod Seç Genişlet

$ ifconfig
enp4s0    Link encap:Ethernet  HWaddr 54:be:f7:57:8f:bd 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1732 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1732 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:152048 (152.0 KB)  TX bytes:152048 (152.0 KB)

wlp3s0    Link encap:Ethernet  HWaddr 24:0a:64:b6:86:0e 
          inet addr:192.168.43.118  Bcast:192.168.43.255  Mask:255.255.255.0
          inet6 addr: fe80::ba:c68e:22cb:f503/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:11457 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10632 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:9209011 (9.2 MB)  TX bytes:1549357 (1.5 MB)

wlx000c0b470f52: error fetching interface information: Device not found


Kod Seç Genişlet

$ iwconfig
wlp3s0    IEEE 802.11bgn  ESSID:"EruimdaS" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: CC:05:1B:3B:13:64   
          Bit Rate=54 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-36 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:9   Missed beacon:0

lo        no wireless extensions.

enp4s0    no wireless extensions.


Kod Seç Genişlet

$ iwlist scanning
wlp3s0    Scan completed :
          Cell 01 - Address: CC:05:1B:3B:13:64
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=70/70  Signal level=-38 dBm 
                    Encryption key:on
                    ESSID:"EruimdaS"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000085c9722f
                    Extra: Last beacon: 95372ms ago
                    IE: Unknown: 0008457275696D646153
                    IE: Unknown: 010882848B0C12961824
                    IE: Unknown: 030106
                    IE: Unknown: 0706555320010B1B
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK

lo        Interface doesn't support scanning.

enp4s0    Interface doesn't support scanning.


Kod Seç Genişlet

$ lsmod
Module                  Size  Used by
drbg                   32768  1
ansi_cprng             16384  0
ctr                    16384  3
ccm                    20480  3
rfcomm                 69632  0
bnep                   20480  2
binfmt_misc            20480  1
nls_iso8859_1          16384  1
uvcvideo               90112  0
videobuf2_vmalloc      16384  1 uvcvideo
videobuf2_memops       16384  1 videobuf2_vmalloc
videobuf2_v4l2         28672  1 uvcvideo
btusb                  45056  0
videobuf2_core         36864  2 uvcvideo,videobuf2_v4l2
btrtl                  16384  1 btusb
v4l2_common            16384  1 videobuf2_v4l2
btbcm                  16384  1 btusb
videodev              176128  4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
btintel                16384  1 btusb
bluetooth             520192  29 bnep,btbcm,btrtl,btusb,rfcomm,btintel
cdc_acm                36864  0
joydev                 20480  0
media                  24576  2 uvcvideo,videodev
rt2800usb              28672  0
rt2x00usb              24576  1 rt2800usb
rt2800lib              94208  1 rt2800usb
rt2x00lib              57344  3 rt2x00usb,rt2800lib,rt2800usb
crc_ccitt              16384  1 rt2800lib
intel_rapl             20480  0
arc4                   16384  2
snd_hda_codec_hdmi     53248  1
rtl8723ae              86016  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
kvm_intel             172032  0
snd_hda_codec_realtek    86016  1
btcoexist              53248  1 rtl8723ae
kvm                   540672  1 kvm_intel
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
rtl8723_common         24576  1 rtl8723ae
snd_hda_intel          40960  5
rtl_pci                28672  1 rtl8723ae
irqbypass              16384  1 kvm
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
rtlwifi                77824  2 rtl_pci,rtl8723ae
mac80211              737280  5 rtl_pci,rtlwifi,rt2x00lib,rt2x00usb,rt2800lib
crct10dif_pclmul       16384  0
snd_hda_core           73728  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
cfg80211              565248  3 mac80211,rtlwifi,rt2x00lib
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
toshiba_wmi            16384  0
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
input_leds             16384  0
sparse_keymap          16384  1 toshiba_wmi
snd_timer              32768  2 snd_pcm,snd_seq
snd                    81920  21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
serio_raw              16384  0
soundcore              16384  1 snd
cryptd                 20480  1 ghash_clmulni_intel
mei_me                 36864  0
shpchp                 36864  0
mei                    98304  1 mei_me
tpm_infineon           20480  0
ie31200_edac           16384  0
lpc_ich                24576  0
edac_core              53248  1 ie31200_edac
mac_hid                16384  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
hid_generic            16384  0
ums_realtek            20480  0
uas                    24576  0
usbhid                 49152  0
usb_storage            69632  2 uas,ums_realtek
hid                   118784  2 hid_generic,usbhid
nouveau              1495040  1
i915                 1208320  4
mxm_wmi                16384  1 nouveau
ttm                    94208  1 nouveau
ahci                   36864  3
i2c_algo_bit           16384  2 i915,nouveau
libahci                32768  1 ahci
drm_kms_helper        155648  2 i915,nouveau
syscopyarea            16384  1 drm_kms_helper
r8169                  81920  0
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
mii                    16384  1 r8169
drm                   364544  8 ttm,i915,drm_kms_helper,nouveau
video                  40960  2 i915,nouveau
wmi                    20480  3 toshiba_wmi,mxm_wmi,nouveau
fjes                   28672  0




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Aralık 2016 - 22:19:35

Kod Seç Genişlet

$ dmesg
[  370.568317] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  370.672440] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  370.776539] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  370.880642] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  370.984720] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  371.088792] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  371.192914] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  371.296999] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  371.401091] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  371.505163] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  371.609274] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  371.713344] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  371.817440] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  371.921531] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  372.025623] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  372.129719] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  372.233778] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  372.337877] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  372.441971] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  372.546069] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  372.650144] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  372.754227] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  372.858304] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  372.962455] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  373.066484] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  373.170572] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  373.274664] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  373.378733] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  373.482867] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  373.586911] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  373.690988] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  373.795105] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  373.899168] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  374.003265] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  374.107312] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  374.211415] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  374.315482] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  374.419501] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  374.523583] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  374.627671] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  374.731743] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  374.835847] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  374.939912] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  375.043984] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  375.148024] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  375.252190] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  375.356255] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  375.460302] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  375.564362] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  375.668429] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  375.776476] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  375.880557] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  375.984653] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  376.088732] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  376.192774] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  376.296843] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  376.400943] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  376.504983] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  376.609079] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  376.713136] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  376.817161] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  376.921229] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  377.025290] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  377.129422] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  377.233423] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  377.337500] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  377.441615] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  377.545654] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  377.649745] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  377.753775] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  377.861882] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  377.965902] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  378.069971] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  378.174026] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  378.278137] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  378.382148] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  378.486219] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  378.590323] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  378.694368] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  378.802399] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  378.906473] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  379.010576] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  379.114588] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  379.218638] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  379.322713] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  379.426779] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  379.534868] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  379.638940] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  379.743000] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  379.847020] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  379.955041] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  380.059125] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  380.163232] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  380.267288] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  380.371323] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  380.475345] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  380.579408] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  380.683476] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  380.787556] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  380.891639] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  380.995648] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  381.099711] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  381.203754] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  381.307856] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  381.411913] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  381.515977] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  381.620027] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  381.724117] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  381.828112] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  381.932139] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  382.036250] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  382.140271] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  382.244366] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  382.348413] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  382.452445] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  382.556517] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  382.660551] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  382.764599] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[  382.868660] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[  382.972746] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[  383.076749] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[  383.180820] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[  383.284862] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[  383.284869] ieee80211 phy119: rt2x00_set_rf: Info - RF chipset 0008 detected
[  383.388963] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0228 with error -110
[  383.492978] ieee80211 phy119: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0228 with error -110
[  383.493160] ieee80211 phy119: Selected rate control algorithm 'minstrel_ht'
[  383.494319] usb 3-3: USB disconnect, device number 56
[  383.805121] usb 3-3: new high-speed USB device number 57 using xhci_hcd
[  384.006744] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  384.006748] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  384.006750] usb 3-3: Product: 802.11 n WLAN
[  384.006751] usb 3-3: Manufacturer: Ralink
[  384.006753] usb 3-3: SerialNumber: 1.0
[  384.173492] usb 3-3: reset high-speed USB device number 57 using xhci_hcd
[  384.368476] ieee80211 phy120: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  384.378492] ieee80211 phy120: rt2x00_set_rf: Info - RF chipset 0008 detected
[  384.378748] ieee80211 phy120: Selected rate control algorithm 'minstrel_ht'
[  384.652720] usb 3-3: USB disconnect, device number 57
[  384.961681] usb 3-3: new high-speed USB device number 58 using xhci_hcd
[  385.163369] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  385.163373] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  385.163375] usb 3-3: Product: 802.11 n WLAN
[  385.163376] usb 3-3: Manufacturer: Ralink
[  385.163377] usb 3-3: SerialNumber: 1.0
[  385.330107] usb 3-3: reset high-speed USB device number 58 using xhci_hcd
[  385.525065] ieee80211 phy121: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  385.535019] ieee80211 phy121: rt2x00_set_rf: Info - RF chipset 0008 detected
[  385.535295] ieee80211 phy121: Selected rate control algorithm 'minstrel_ht'
[  386.130817] usb 3-3: USB disconnect, device number 58
[  386.450446] usb 3-3: new high-speed USB device number 59 using xhci_hcd
[  386.651906] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  386.651910] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  386.651912] usb 3-3: Product: 802.11 n WLAN
[  386.651913] usb 3-3: Manufacturer: Ralink
[  386.651914] usb 3-3: SerialNumber: 1.0
[  386.762611] ieee80211 phy122: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  386.762616] ieee80211 phy122: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  386.762618] ieee80211 phy122: rt2x00lib_probe_dev: Error - Failed to allocate device
[  386.762744] usb 3-3: USB disconnect, device number 59
[  387.034673] usb 3-3: new high-speed USB device number 60 using xhci_hcd
[  387.236348] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  387.236353] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  387.236356] usb 3-3: Product: 802.11 n WLAN
[  387.236358] usb 3-3: Manufacturer: Ralink
[  387.236360] usb 3-3: SerialNumber: 1.0
[  387.403097] usb 3-3: reset high-speed USB device number 60 using xhci_hcd
[  387.598063] ieee80211 phy123: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  387.608014] ieee80211 phy123: rt2x00_set_rf: Info - RF chipset 0008 detected
[  387.608260] ieee80211 phy123: Selected rate control algorithm 'minstrel_ht'
[  387.942206] usb 3-3: USB disconnect, device number 60
[  388.259273] usb 3-3: new high-speed USB device number 61 using xhci_hcd
[  388.611465] usb 3-3: new high-speed USB device number 62 using xhci_hcd
[  389.079651] usb 3-3: new high-speed USB device number 63 using xhci_hcd
[  389.281089] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  389.281093] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  389.281094] usb 3-3: Product: 802.11 n WLAN
[  389.281096] usb 3-3: Manufacturer: Ralink
[  389.281097] usb 3-3: SerialNumber: 1.0
[  389.448079] usb 3-3: reset high-speed USB device number 63 using xhci_hcd
[  389.616016] usb 3-3: Device not responding to setup address.
[  389.819972] usb 3-3: Device not responding to setup address.
[  390.024053] usb 3-3: device not accepting address 63, error -71
[  390.080153] ieee80211 phy124: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  390.080158] ieee80211 phy124: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  390.080160] ieee80211 phy124: rt2x00lib_probe_dev: Error - Failed to allocate device
[  390.080291] usb 3-3: USB disconnect, device number 63
[  390.320235] usb 3-3: new high-speed USB device number 64 using xhci_hcd
[  395.618560] usb 3-3: new high-speed USB device number 65 using xhci_hcd
[  395.820266] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  395.820270] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  395.820272] usb 3-3: Product: 802.11 n WLAN
[  395.820273] usb 3-3: Manufacturer: Ralink
[  395.820274] usb 3-3: SerialNumber: 1.0
[  395.986829] usb 3-3: reset high-speed USB device number 65 using xhci_hcd
[  396.154899] usb 3-3: Device not responding to setup address.
[  396.358918] usb 3-3: Device not responding to setup address.
[  396.562986] usb 3-3: device not accepting address 65, error -71
[  396.619035] ieee80211 phy125: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  396.619042] ieee80211 phy125: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  396.619044] ieee80211 phy125: rt2x00lib_probe_dev: Error - Failed to allocate device
[  396.619242] usb 3-3: USB disconnect, device number 65
[  396.859078] usb 3-3: new high-speed USB device number 66 using xhci_hcd
[  397.060825] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  397.060829] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  397.060831] usb 3-3: Product: 802.11 n WLAN
[  397.060832] usb 3-3: Manufacturer: Ralink
[  397.060833] usb 3-3: SerialNumber: 1.0
[  397.227495] usb 3-3: reset high-speed USB device number 66 using xhci_hcd
[  397.422277] ieee80211 phy126: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  397.432711] ieee80211 phy126: rt2x00_set_rf: Info - RF chipset 0008 detected
[  397.433078] ieee80211 phy126: Selected rate control algorithm 'minstrel_ht'
[  397.597358] usb 3-3: USB disconnect, device number 66
[  397.899551] usb 3-3: new high-speed USB device number 67 using xhci_hcd
[  398.101204] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  398.101208] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  398.101209] usb 3-3: Product: 802.11 n WLAN
[  398.101211] usb 3-3: Manufacturer: Ralink
[  398.101212] usb 3-3: SerialNumber: 1.0
[  398.211765] ieee80211 phy127: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  398.211774] ieee80211 phy127: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  398.211777] ieee80211 phy127: rt2x00lib_probe_dev: Error - Failed to allocate device
[  398.211957] usb 3-3: USB disconnect, device number 67
[  398.451799] usb 3-3: new high-speed USB device number 68 using xhci_hcd
[  398.653501] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  398.653505] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  398.653506] usb 3-3: Product: 802.11 n WLAN
[  398.653508] usb 3-3: Manufacturer: Ralink
[  398.653509] usb 3-3: SerialNumber: 1.0
[  398.820148] usb 3-3: reset high-speed USB device number 68 using xhci_hcd
[  399.015113] ieee80211 phy128: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  399.025088] ieee80211 phy128: rt2x00_set_rf: Info - RF chipset 0008 detected
[  399.025334] ieee80211 phy128: Selected rate control algorithm 'minstrel_ht'
[  403.127409] usb 3-3: USB disconnect, device number 68
[  403.449929] usb 3-3: new high-speed USB device number 69 using xhci_hcd
[  403.651727] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  403.651732] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  403.651734] usb 3-3: Product: 802.11 n WLAN
[  403.651736] usb 3-3: Manufacturer: Ralink
[  403.651738] usb 3-3: SerialNumber: 1.0
[  403.818312] usb 3-3: reset high-speed USB device number 69 using xhci_hcd
[  404.013222] ieee80211 phy129: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  404.023128] ieee80211 phy129: rt2x00_set_rf: Info - RF chipset 0008 detected
[  404.023374] ieee80211 phy129: Selected rate control algorithm 'minstrel_ht'
[  405.043503] rt2800usb 3-3:1.0 wlx000c0b470f52: renamed from wlan0
[  405.074833] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[  405.074914] ieee80211 phy129: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  405.090374] ieee80211 phy129: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[  405.269145] usb 3-3: USB disconnect, device number 69
[  405.318813] ieee80211 phy129: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x101c with error -19
[  405.318861] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[  405.646831] usb 3-3: new high-speed USB device number 70 using xhci_hcd
[  407.655134] wlp3s0: deauthenticating from cc:05:1b:3b:13:64 by local choice (Reason: 3=DEAUTH_LEAVING)
[  407.671536] cfg80211: World regulatory domain updated:
[  407.671541] cfg80211:  DFS Master region: unset
[  407.671543] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  407.671546] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  407.671548] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  407.671550] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  407.671552] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  407.671555] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  407.671557] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  407.671559] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  407.671562] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  407.904724] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  407.909104] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[  407.950362] r8169 0000:04:00.0 enp4s0: link down
[  407.950429] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[  408.046643] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  409.026420] wlp3s0: authenticate with cc:05:1b:3b:13:64
[  409.039778] wlp3s0: send auth to cc:05:1b:3b:13:64 (try 1/3)
[  409.042153] wlp3s0: authenticated
[  409.042331] rtl8723ae 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
[  409.042335] rtl8723ae 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
[  409.044242] wlp3s0: associate with cc:05:1b:3b:13:64 (try 1/3)
[  409.046478] wlp3s0: RX AssocResp from cc:05:1b:3b:13:64 (capab=0x431 status=0 aid=1)
[  409.046672] wlp3s0: associated
[  409.046716] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  409.049796] cfg80211: Regulatory domain changed to country: US
[  409.049799] cfg80211:  DFS Master region: FCC
[  409.049800] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  409.049802] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[  409.049804] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[  409.049806] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[  409.049808] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[  409.049810] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[  409.049813] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  410.945062] usb 3-3: new high-speed USB device number 71 using xhci_hcd
[  416.243267] usb 3-3: new high-speed USB device number 72 using xhci_hcd
[  421.541448] usb 3-3: new high-speed USB device number 73 using xhci_hcd
[  426.839666] usb 3-3: new high-speed USB device number 74 using xhci_hcd
[  432.321941] usb 3-3: new high-speed USB device number 75 using xhci_hcd
[  432.523640] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  432.523643] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  432.523645] usb 3-3: Product: 802.11 n WLAN
[  432.523647] usb 3-3: Manufacturer: Ralink
[  432.523648] usb 3-3: SerialNumber: 1.0
[  432.638260] usb 3-3: reset high-speed USB device number 75 using xhci_hcd
[  432.833258] ieee80211 phy130: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  432.843302] ieee80211 phy130: rt2x00_set_rf: Info - RF chipset 0008 detected
[  432.843549] ieee80211 phy130: Selected rate control algorithm 'minstrel_ht'
[  433.755277] usb 3-3: USB disconnect, device number 75
[  434.062664] usb 3-3: new high-speed USB device number 76 using xhci_hcd
[  434.264336] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  434.264340] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  434.264342] usb 3-3: Product: 802.11 n WLAN
[  434.264343] usb 3-3: Manufacturer: Ralink
[  434.264345] usb 3-3: SerialNumber: 1.0
[  434.431018] usb 3-3: reset high-speed USB device number 76 using xhci_hcd
[  434.542901] ieee80211 phy131: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  434.542906] ieee80211 phy131: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  434.542908] ieee80211 phy131: rt2x00lib_probe_dev: Error - Failed to allocate device
[  434.543048] usb 3-3: USB disconnect, device number 76
[  434.782960] usb 3-3: new high-speed USB device number 77 using xhci_hcd
[  434.984709] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  434.984713] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  434.984715] usb 3-3: Product: 802.11 n WLAN
[  434.984716] usb 3-3: Manufacturer: Ralink
[  434.984717] usb 3-3: SerialNumber: 1.0
[  435.151340] usb 3-3: reset high-speed USB device number 77 using xhci_hcd
[  435.346454] ieee80211 phy132: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  435.357061] ieee80211 phy132: rt2x00_set_rf: Info - RF chipset 0008 detected
[  435.358012] ieee80211 phy132: Selected rate control algorithm 'minstrel_ht'
[  436.905485] usb 3-3: USB disconnect, device number 77
[  437.215962] usb 3-3: new high-speed USB device number 78 using xhci_hcd
[  437.418392] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  437.418397] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  437.418400] usb 3-3: Product: 802.11 n WLAN
[  437.418403] usb 3-3: Manufacturer: Ralink
[  437.418405] usb 3-3: SerialNumber: 1.0
[  437.532235] usb 3-3: reset high-speed USB device number 78 using xhci_hcd
[  437.727256] ieee80211 phy133: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  437.737209] ieee80211 phy133: rt2x00_set_rf: Info - RF chipset 0008 detected
[  437.737468] ieee80211 phy133: Selected rate control algorithm 'minstrel_ht'
[  438.373489] usb 3-3: USB disconnect, device number 78
[  438.684576] usb 3-3: new high-speed USB device number 79 using xhci_hcd
[  438.886294] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  438.886298] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  438.886300] usb 3-3: Product: 802.11 n WLAN
[  438.886301] usb 3-3: Manufacturer: Ralink
[  438.886302] usb 3-3: SerialNumber: 1.0
[  439.053051] usb 3-3: reset high-speed USB device number 79 using xhci_hcd
[  444.238875] usb 3-3: device descriptor read/all, error -110
[  444.294914] ieee80211 phy134: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  444.294918] ieee80211 phy134: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  444.294920] ieee80211 phy134: rt2x00lib_probe_dev: Error - Failed to allocate device
[  444.295059] usb 3-3: USB disconnect, device number 79
[  444.534972] usb 3-3: new high-speed USB device number 80 using xhci_hcd
[  444.736304] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  444.736308] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  444.736310] usb 3-3: Product: 802.11 n WLAN
[  444.736312] usb 3-3: Manufacturer: Ralink
[  444.736313] usb 3-3: SerialNumber: 1.0
[  444.847184] ieee80211 phy135: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  444.847190] ieee80211 phy135: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  444.847192] ieee80211 phy135: rt2x00lib_probe_dev: Error - Failed to allocate device
[  444.847326] usb 3-3: USB disconnect, device number 80
[  445.087226] usb 3-3: new high-speed USB device number 81 using xhci_hcd
[  445.288882] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  445.288886] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  445.288888] usb 3-3: Product: 802.11 n WLAN
[  445.288889] usb 3-3: Manufacturer: Ralink
[  445.288890] usb 3-3: SerialNumber: 1.0
[  445.455463] usb 3-3: reset high-speed USB device number 81 using xhci_hcd
[  445.650500] ieee80211 phy136: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  445.660460] ieee80211 phy136: rt2x00_set_rf: Info - RF chipset 0008 detected
[  445.660715] ieee80211 phy136: Selected rate control algorithm 'minstrel_ht'
[  447.979781] usb 3-3: USB disconnect, device number 81
[  448.272865] usb 3-3: new high-speed USB device number 82 using xhci_hcd
[  448.474322] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  448.474326] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  448.474328] usb 3-3: Product: 802.11 n WLAN
[  448.474330] usb 3-3: Manufacturer: Ralink
[  448.474331] usb 3-3: SerialNumber: 1.0
[  448.640774] usb 3-3: reset high-speed USB device number 82 using xhci_hcd
[  448.835291] ieee80211 phy137: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  448.845254] ieee80211 phy137: rt2x00_set_rf: Info - RF chipset 0008 detected
[  448.845523] ieee80211 phy137: Selected rate control algorithm 'minstrel_ht'
[  448.959193] usb 3-3: USB disconnect, device number 82
[  449.255894] usb 3-3: new high-speed USB device number 83 using xhci_hcd
[  449.457992] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  449.457995] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  449.457997] usb 3-3: Product: 802.11 n WLAN
[  449.457999] usb 3-3: Manufacturer: Ralink
[  449.458000] usb 3-3: SerialNumber: 1.0
[  449.571761] usb 3-3: reset high-speed USB device number 83 using xhci_hcd
[  449.766408] ieee80211 phy138: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  449.776380] ieee80211 phy138: rt2x00_set_rf: Info - RF chipset 0008 detected
[  449.776655] ieee80211 phy138: Selected rate control algorithm 'minstrel_ht'
[  449.870244] usb 3-3: USB disconnect, device number 83
[  450.190916] usb 3-3: new high-speed USB device number 84 using xhci_hcd
[  450.392371] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  450.392375] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  450.392377] usb 3-3: Product: 802.11 n WLAN
[  450.392378] usb 3-3: Manufacturer: Ralink
[  450.392379] usb 3-3: SerialNumber: 1.0
[  450.558886] usb 3-3: reset high-speed USB device number 84 using xhci_hcd
[  450.753507] ieee80211 phy139: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  450.763439] ieee80211 phy139: rt2x00_set_rf: Info - RF chipset 0008 detected
[  450.763706] ieee80211 phy139: Selected rate control algorithm 'minstrel_ht'
[  450.981895] usb 3-3: USB disconnect, device number 84
[  451.270039] usb 3-3: new high-speed USB device number 85 using xhci_hcd
[  451.471472] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  451.471475] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  451.471477] usb 3-3: Product: 802.11 n WLAN
[  451.471479] usb 3-3: Manufacturer: Ralink
[  451.471480] usb 3-3: SerialNumber: 1.0
[  451.637924] usb 3-3: reset high-speed USB device number 85 using xhci_hcd
[  456.818306] usb 3-3: device descriptor read/all, error -110
[  456.874293] ieee80211 phy140: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  456.874298] ieee80211 phy140: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  456.874299] ieee80211 phy140: rt2x00lib_probe_dev: Error - Failed to allocate device
[  456.874440] usb 3-3: USB disconnect, device number 85
[  457.114080] usb 3-3: new high-speed USB device number 86 using xhci_hcd
[  457.315692] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  457.315695] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  457.315697] usb 3-3: Product: 802.11 n WLAN
[  457.315699] usb 3-3: Manufacturer: Ralink
[  457.315700] usb 3-3: SerialNumber: 1.0
[  457.425985] ieee80211 phy141: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  457.425990] ieee80211 phy141: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  457.425991] ieee80211 phy141: rt2x00lib_probe_dev: Error - Failed to allocate device
[  457.426118] usb 3-3: USB disconnect, device number 86
[  457.665864] usb 3-3: new high-speed USB device number 87 using xhci_hcd
[  457.867392] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  457.867395] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  457.867397] usb 3-3: Product: 802.11 n WLAN
[  457.867399] usb 3-3: Manufacturer: Ralink
[  457.867400] usb 3-3: SerialNumber: 1.0
[  458.033923] usb 3-3: reset high-speed USB device number 87 using xhci_hcd
[  463.215873] usb 3-3: device descriptor read/all, error -110
[  463.271990] ieee80211 phy142: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  463.272002] ieee80211 phy142: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  463.272007] ieee80211 phy142: rt2x00lib_probe_dev: Error - Failed to allocate device
[  463.272342] usb 3-3: USB disconnect, device number 87
[  463.511726] usb 3-3: new high-speed USB device number 88 using xhci_hcd
[  463.717224] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  463.717228] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  463.717229] usb 3-3: Product: 802.11 n WLAN
[  463.717231] usb 3-3: Manufacturer: Ralink
[  463.717232] usb 3-3: SerialNumber: 1.0
[  463.883905] usb 3-3: reset high-speed USB device number 88 using xhci_hcd
[  464.078945] ieee80211 phy143: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  464.089889] ieee80211 phy143: rt2x00_set_rf: Info - RF chipset 0008 detected
[  464.090383] ieee80211 phy143: Selected rate control algorithm 'minstrel_ht'
[  464.458240] usb 3-3: USB disconnect, device number 88
[  464.759461] usb 3-3: new high-speed USB device number 89 using xhci_hcd
[  464.960992] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  464.960995] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  464.960997] usb 3-3: Product: 802.11 n WLAN
[  464.960998] usb 3-3: Manufacturer: Ralink
[  464.961000] usb 3-3: SerialNumber: 1.0
[  465.127519] usb 3-3: reset high-speed USB device number 89 using xhci_hcd
[  465.322386] ieee80211 phy144: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  465.332273] ieee80211 phy144: rt2x00_set_rf: Info - RF chipset 0008 detected
[  465.332544] ieee80211 phy144: Selected rate control algorithm 'minstrel_ht'
[  466.553751] usb 3-3: USB disconnect, device number 89
[  466.843069] usb 3-3: new high-speed USB device number 90 using xhci_hcd
[  467.011121] usb 3-3: Device not responding to setup address.
[  467.215055] usb 3-3: Device not responding to setup address.
[  467.419006] usb 3-3: device not accepting address 90, error -71
[  467.714958] usb 3-3: new high-speed USB device number 92 using xhci_hcd
[  467.883007] usb 3-3: Device not responding to setup address.
[  468.086874] usb 3-3: Device not responding to setup address.
[  468.290887] usb 3-3: device not accepting address 92, error -71
[  468.586849] usb 3-3: new high-speed USB device number 94 using xhci_hcd
[  468.788226] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  468.788230] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  468.788232] usb 3-3: Product: 802.11 n WLAN
[  468.788234] usb 3-3: Manufacturer: Ralink
[  468.788235] usb 3-3: SerialNumber: 1.0
[  468.955023] usb 3-3: reset high-speed USB device number 94 using xhci_hcd
[  469.066826] ieee80211 phy145: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  469.066830] ieee80211 phy145: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  469.066832] ieee80211 phy145: rt2x00lib_probe_dev: Error - Failed to allocate device
[  469.066961] usb 3-3: USB disconnect, device number 94
[  469.306813] usb 3-3: new high-speed USB device number 95 using xhci_hcd
[  469.508678] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  469.508686] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  469.508691] usb 3-3: Product: 802.11 n WLAN
[  469.508694] usb 3-3: Manufacturer: Ralink
[  469.508698] usb 3-3: SerialNumber: 1.0
[  469.622972] usb 3-3: reset high-speed USB device number 95 using xhci_hcd
[  469.817820] ieee80211 phy146: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  469.828202] ieee80211 phy146: rt2x00_set_rf: Info - RF chipset 0008 detected
[  469.828510] ieee80211 phy146: Selected rate control algorithm 'minstrel_ht'
[  469.854951] usb 3-3: USB disconnect, device number 95
[  470.158664] usb 3-3: new high-speed USB device number 96 using xhci_hcd
[  470.510643] usb 3-3: new high-speed USB device number 97 using xhci_hcd
[  470.930612] usb 3-3: new high-speed USB device number 98 using xhci_hcd
[  471.426617] usb 3-3: new high-speed USB device number 99 using xhci_hcd
[  471.628268] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  471.628276] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  471.628280] usb 3-3: Product: 802.11 n WLAN
[  471.628283] usb 3-3: Manufacturer: Ralink
[  471.628286] usb 3-3: SerialNumber: 1.0
[  471.794715] usb 3-3: reset high-speed USB device number 99 using xhci_hcd
[  471.989811] ieee80211 phy147: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  472.000441] ieee80211 phy147: rt2x00_set_rf: Info - RF chipset 0008 detected
[  472.000880] ieee80211 phy147: Selected rate control algorithm 'minstrel_ht'
[  472.073641] usb 3-3: USB disconnect, device number 99
[  472.370524] usb 3-3: new high-speed USB device number 100 using xhci_hcd
[  472.572263] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  472.572268] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  472.572271] usb 3-3: Product: 802.11 n WLAN
[  472.572274] usb 3-3: Manufacturer: Ralink
[  472.572276] usb 3-3: SerialNumber: 1.0
[  472.682560] ieee80211 phy148: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  472.682566] ieee80211 phy148: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  472.682569] ieee80211 phy148: rt2x00lib_probe_dev: Error - Failed to allocate device
[  472.682704] usb 3-3: USB disconnect, device number 100
[  472.922516] usb 3-3: new high-speed USB device number 101 using xhci_hcd
[  473.124155] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  473.124161] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  473.124163] usb 3-3: Product: 802.11 n WLAN
[  473.124166] usb 3-3: Manufacturer: Ralink
[  473.124167] usb 3-3: SerialNumber: 1.0
[  473.234603] ieee80211 phy149: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  473.234616] ieee80211 phy149: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  473.234622] ieee80211 phy149: rt2x00lib_probe_dev: Error - Failed to allocate device
[  473.234888] usb 3-3: USB disconnect, device number 101
[  473.506490] usb 3-3: new high-speed USB device number 102 using xhci_hcd
[  473.708232] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  473.708237] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  473.708239] usb 3-3: Product: 802.11 n WLAN
[  473.708242] usb 3-3: Manufacturer: Ralink
[  473.708243] usb 3-3: SerialNumber: 1.0
[  473.874705] usb 3-3: reset high-speed USB device number 102 using xhci_hcd
[  474.069547] ieee80211 phy150: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  474.079508] ieee80211 phy150: rt2x00_set_rf: Info - RF chipset 0008 detected
[  474.079781] ieee80211 phy150: Selected rate control algorithm 'minstrel_ht'
[  474.342766] usb 3-3: USB disconnect, device number 102
[  474.634471] usb 3-3: new high-speed USB device number 103 using xhci_hcd
[  474.836086] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  474.836090] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  474.836091] usb 3-3: Product: 802.11 n WLAN
[  474.836093] usb 3-3: Manufacturer: Ralink
[  474.836094] usb 3-3: SerialNumber: 1.0
[  475.002697] usb 3-3: reset high-speed USB device number 103 using xhci_hcd
[  475.197570] ieee80211 phy151: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  475.207518] ieee80211 phy151: rt2x00_set_rf: Info - RF chipset 0008 detected
[  475.207770] ieee80211 phy151: Selected rate control algorithm 'minstrel_ht'
[  475.279430] usb 3-3: USB disconnect, device number 103
[  475.574475] usb 3-3: new high-speed USB device number 104 using xhci_hcd
[  475.776044] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  475.776047] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  475.776049] usb 3-3: Product: 802.11 n WLAN
[  475.776051] usb 3-3: Manufacturer: Ralink
[  475.776052] usb 3-3: SerialNumber: 1.0
[  475.942714] usb 3-3: reset high-speed USB device number 104 using xhci_hcd
[  476.137548] ieee80211 phy152: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  476.147492] ieee80211 phy152: rt2x00_set_rf: Info - RF chipset 0008 detected
[  476.147766] ieee80211 phy152: Selected rate control algorithm 'minstrel_ht'
[  476.594695] usb 3-3: USB disconnect, device number 104
[  476.898494] usb 3-3: new high-speed USB device number 105 using xhci_hcd
[  477.100112] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  477.100116] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  477.100118] usb 3-3: Product: 802.11 n WLAN
[  477.100119] usb 3-3: Manufacturer: Ralink
[  477.100120] usb 3-3: SerialNumber: 1.0
[  477.266729] usb 3-3: reset high-speed USB device number 105 using xhci_hcd
[  477.461332] ieee80211 phy153: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  477.471231] ieee80211 phy153: rt2x00_set_rf: Info - RF chipset 0008 detected
[  477.471501] ieee80211 phy153: Selected rate control algorithm 'minstrel_ht'
[  477.588569] usb 3-3: USB disconnect, device number 105
[  477.890477] usb 3-3: new high-speed USB device number 106 using xhci_hcd
[  478.091627] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  478.091630] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  478.091632] usb 3-3: Product: 802.11 n WLAN
[  478.091634] usb 3-3: Manufacturer: Ralink
[  478.091635] usb 3-3: SerialNumber: 1.0
[  478.258616] usb 3-3: reset high-speed USB device number 106 using xhci_hcd
[  483.314897] ieee80211 phy154: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  483.314902] ieee80211 phy154: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  483.314903] ieee80211 phy154: rt2x00lib_probe_dev: Error - Failed to allocate device
[  483.315050] usb 3-3: USB disconnect, device number 106
[  483.554875] usb 3-3: new high-speed USB device number 107 using xhci_hcd
[  483.760053] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  483.760058] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  483.760062] usb 3-3: Product: 802.11 n WLAN
[  483.760064] usb 3-3: Manufacturer: Ralink
[  483.760066] usb 3-3: SerialNumber: 1.0
[  483.927053] usb 3-3: reset high-speed USB device number 107 using xhci_hcd
[  484.121984] ieee80211 phy155: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  484.131900] ieee80211 phy155: rt2x00_set_rf: Info - RF chipset 0008 detected
[  484.132147] ieee80211 phy155: Selected rate control algorithm 'minstrel_ht'
[  484.878817] usb 3-3: USB disconnect, device number 107
[  485.175062] usb 3-3: new high-speed USB device number 108 using xhci_hcd
[  485.376363] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  485.376368] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  485.376370] usb 3-3: Product: 802.11 n WLAN
[  485.376372] usb 3-3: Manufacturer: Ralink
[  485.376373] usb 3-3: SerialNumber: 1.0
[  485.543229] usb 3-3: reset high-speed USB device number 108 using xhci_hcd
[  485.738157] ieee80211 phy156: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  485.748264] ieee80211 phy156: rt2x00_set_rf: Info - RF chipset 0008 detected
[  485.748526] ieee80211 phy156: Selected rate control algorithm 'minstrel_ht'
[  486.228203] usb 3-3: USB disconnect, device number 108
[  486.519256] usb 3-3: new high-speed USB device number 109 using xhci_hcd
[  486.721221] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  486.721229] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  486.721233] usb 3-3: Product: 802.11 n WLAN
[  486.721237] usb 3-3: Manufacturer: Ralink
[  486.721240] usb 3-3: SerialNumber: 1.0
[  486.835522] usb 3-3: reset high-speed USB device number 109 using xhci_hcd
[  486.947353] ieee80211 phy157: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  486.947359] ieee80211 phy157: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  486.947361] ieee80211 phy157: rt2x00lib_probe_dev: Error - Failed to allocate device
[  486.947498] usb 3-3: USB disconnect, device number 109
[  487.187339] usb 3-3: new high-speed USB device number 110 using xhci_hcd
[  487.389298] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  487.389307] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  487.389312] usb 3-3: Product: 802.11 n WLAN
[  487.389316] usb 3-3: Manufacturer: Ralink
[  487.389320] usb 3-3: SerialNumber: 1.0
[  487.503675] usb 3-3: reset high-speed USB device number 110 using xhci_hcd
[  487.698480] ieee80211 phy158: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  487.708437] ieee80211 phy158: rt2x00_set_rf: Info - RF chipset 0008 detected
[  487.708693] ieee80211 phy158: Selected rate control algorithm 'minstrel_ht'
[  487.867379] usb 3-3: USB disconnect, device number 110
[  488.159408] usb 3-3: new high-speed USB device number 111 using xhci_hcd
[  488.327562] usb 3-3: Device not responding to setup address.
[  488.531528] usb 3-3: Device not responding to setup address.
[  488.735586] usb 3-3: device not accepting address 111, error -71
[  489.031580] usb 3-3: new high-speed USB device number 113 using xhci_hcd
[  489.233654] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  489.233658] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  489.233660] usb 3-3: Product: 802.11 n WLAN
[  489.233661] usb 3-3: Manufacturer: Ralink
[  489.233662] usb 3-3: SerialNumber: 1.0
[  489.343681] ieee80211 phy159: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  489.343689] ieee80211 phy159: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  489.343692] ieee80211 phy159: rt2x00lib_probe_dev: Error - Failed to allocate device
[  489.343882] usb 3-3: USB disconnect, device number 113
[  489.583634] usb 3-3: new high-speed USB device number 114 using xhci_hcd
[  489.785573] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  489.785582] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  489.785586] usb 3-3: Product: 802.11 n WLAN
[  489.785590] usb 3-3: Manufacturer: Ralink
[  489.785593] usb 3-3: SerialNumber: 1.0
[  489.899966] usb 3-3: reset high-speed USB device number 114 using xhci_hcd
[  490.094644] ieee80211 phy160: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  490.104786] ieee80211 phy160: rt2x00_set_rf: Info - RF chipset 0008 detected
[  490.105037] ieee80211 phy160: Selected rate control algorithm 'minstrel_ht'
[  490.269147] usb 3-3: USB disconnect, device number 114
[  490.563799] usb 3-3: new high-speed USB device number 115 using xhci_hcd
[  490.915844] usb 3-3: new high-speed USB device number 116 using xhci_hcd
[  491.117374] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  491.117378] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  491.117380] usb 3-3: Product: 802.11 n WLAN
[  491.117381] usb 3-3: Manufacturer: Ralink
[  491.117383] usb 3-3: SerialNumber: 1.0
[  491.284136] usb 3-3: reset high-speed USB device number 116 using xhci_hcd
[  491.478979] ieee80211 phy161: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  491.488901] ieee80211 phy161: rt2x00_set_rf: Info - RF chipset 0008 detected
[  491.489159] ieee80211 phy161: Selected rate control algorithm 'minstrel_ht'
[  491.545853] usb 3-3: USB disconnect, device number 116
[  491.839990] usb 3-3: new high-speed USB device number 117 using xhci_hcd
[  497.136864] usb 3-3: new high-speed USB device number 118 using xhci_hcd
[  497.338522] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  497.338526] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  497.338528] usb 3-3: Product: 802.11 n WLAN
[  497.338529] usb 3-3: Manufacturer: Ralink
[  497.338530] usb 3-3: SerialNumber: 1.0
[  497.505117] usb 3-3: reset high-speed USB device number 118 using xhci_hcd
[  497.700006] ieee80211 phy162: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  497.709952] ieee80211 phy162: rt2x00_set_rf: Info - RF chipset 0008 detected
[  497.710221] ieee80211 phy162: Selected rate control algorithm 'minstrel_ht'
[  499.246820] usb 3-3: USB disconnect, device number 118
[  499.573344] usb 3-3: new high-speed USB device number 119 using xhci_hcd
[  499.774547] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  499.774551] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  499.774553] usb 3-3: Product: 802.11 n WLAN
[  499.774554] usb 3-3: Manufacturer: Ralink
[  499.774556] usb 3-3: SerialNumber: 1.0
[  499.941604] usb 3-3: reset high-speed USB device number 119 using xhci_hcd
[  500.136632] ieee80211 phy163: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  500.147142] ieee80211 phy163: rt2x00_set_rf: Info - RF chipset 0008 detected
[  500.147563] ieee80211 phy163: Selected rate control algorithm 'minstrel_ht'
[  500.664705] usb 3-3: USB disconnect, device number 119
[  500.957502] usb 3-3: new high-speed USB device number 120 using xhci_hcd
[  501.159078] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  501.159081] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  501.159083] usb 3-3: Product: 802.11 n WLAN
[  501.159085] usb 3-3: Manufacturer: Ralink
[  501.159086] usb 3-3: SerialNumber: 1.0
[  501.325922] usb 3-3: reset high-speed USB device number 120 using xhci_hcd
[  501.520842] ieee80211 phy164: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  501.531100] ieee80211 phy164: rt2x00_set_rf: Info - RF chipset 0008 detected
[  501.531431] ieee80211 phy164: Selected rate control algorithm 'minstrel_ht'
[  502.035566] usb 3-3: USB disconnect, device number 120
[  502.329758] usb 3-3: new high-speed USB device number 121 using xhci_hcd
[  502.531451] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  502.531454] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  502.531456] usb 3-3: Product: 802.11 n WLAN
[  502.531458] usb 3-3: Manufacturer: Ralink
[  502.531459] usb 3-3: SerialNumber: 1.0
[  502.698046] usb 3-3: reset high-speed USB device number 121 using xhci_hcd
[  502.892993] ieee80211 phy165: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  502.902907] ieee80211 phy165: rt2x00_set_rf: Info - RF chipset 0008 detected
[  502.903162] ieee80211 phy165: Selected rate control algorithm 'minstrel_ht'
[  505.466770] usb 3-3: USB disconnect, device number 121
[  505.774496] usb 3-3: new high-speed USB device number 122 using xhci_hcd
[  506.158597] usb 3-3: new high-speed USB device number 123 using xhci_hcd
[  506.360249] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  506.360253] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  506.360255] usb 3-3: Product: 802.11 n WLAN
[  506.360256] usb 3-3: Manufacturer: Ralink
[  506.360258] usb 3-3: SerialNumber: 1.0
[  506.526946] usb 3-3: reset high-speed USB device number 123 using xhci_hcd
[  506.721762] ieee80211 phy166: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  506.731754] ieee80211 phy166: rt2x00_set_rf: Info - RF chipset 0008 detected
[  506.732024] ieee80211 phy166: Selected rate control algorithm 'minstrel_ht'
[  508.249852] usb 3-3: USB disconnect, device number 123
[  508.539059] usb 3-3: new high-speed USB device number 124 using xhci_hcd
[  508.740709] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  508.740713] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  508.740715] usb 3-3: Product: 802.11 n WLAN
[  508.740716] usb 3-3: Manufacturer: Ralink
[  508.740718] usb 3-3: SerialNumber: 1.0
[  508.907357] usb 3-3: reset high-speed USB device number 124 using xhci_hcd
[  509.102194] ieee80211 phy167: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  509.112249] ieee80211 phy167: rt2x00_set_rf: Info - RF chipset 0008 detected
[  509.112540] ieee80211 phy167: Selected rate control algorithm 'minstrel_ht'
[  510.525842] usb 3-3: USB disconnect, device number 124
[  510.839626] usb 3-3: new high-speed USB device number 125 using xhci_hcd
[  511.041438] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  511.041446] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  511.041450] usb 3-3: Product: 802.11 n WLAN
[  511.041454] usb 3-3: Manufacturer: Ralink
[  511.041457] usb 3-3: SerialNumber: 1.0
[  511.212613] usb 3-3: reset high-speed USB device number 125 using xhci_hcd
[  511.353327] ieee80211 phy168: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  511.363292] ieee80211 phy168: rt2x00_set_rf: Info - RF chipset 0008 detected
[  511.363700] ieee80211 phy168: Selected rate control algorithm 'minstrel_ht'
[  511.457270] usb 3-3: USB disconnect, device number 125
[  511.754055] usb 3-3: new high-speed USB device number 126 using xhci_hcd
[  511.957320] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  511.957326] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  511.957329] usb 3-3: Product: 802.11 n WLAN
[  511.957332] usb 3-3: Manufacturer: Ralink
[  511.957334] usb 3-3: SerialNumber: 1.0
[  512.125149] usb 3-3: reset high-speed USB device number 126 using xhci_hcd
[  512.321175] ieee80211 phy169: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  512.331032] ieee80211 phy169: rt2x00_set_rf: Info - RF chipset 0008 detected
[  512.331323] ieee80211 phy169: Selected rate control algorithm 'minstrel_ht'
[  512.458556] usb 3-3: USB disconnect, device number 126
[  512.757877] usb 3-3: new high-speed USB device number 127 using xhci_hcd
[  513.112580] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[  518.329633] usb 3-3: device descriptor read/all, error -110
[  518.627173] usb 3-3: new high-speed USB device number 8 using xhci_hcd
[  518.833445] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  518.833454] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  518.833457] usb 3-3: Product: 802.11 n WLAN
[  518.833459] usb 3-3: Manufacturer: Ralink
[  518.833461] usb 3-3: SerialNumber: 1.0
[  519.001295] usb 3-3: reset high-speed USB device number 8 using xhci_hcd
[  519.113805] ieee80211 phy170: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  519.113811] ieee80211 phy170: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  519.113814] ieee80211 phy170: rt2x00lib_probe_dev: Error - Failed to allocate device
[  519.113998] usb 3-3: USB disconnect, device number 8
[  519.354957] usb 3-3: new high-speed USB device number 9 using xhci_hcd
[  519.557343] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  519.557346] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  519.557348] usb 3-3: Product: 802.11 n WLAN
[  519.557350] usb 3-3: Manufacturer: Ralink
[  519.557351] usb 3-3: SerialNumber: 1.0
[  519.725086] usb 3-3: reset high-speed USB device number 9 using xhci_hcd
[  519.920789] ieee80211 phy171: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  519.930753] ieee80211 phy171: rt2x00_set_rf: Info - RF chipset 0008 detected
[  519.931023] ieee80211 phy171: Selected rate control algorithm 'minstrel_ht'
[  521.335124] usb 3-3: USB disconnect, device number 9
[  521.625809] usb 3-3: new high-speed USB device number 10 using xhci_hcd
[  521.979386] usb 3-3: new high-speed USB device number 11 using xhci_hcd
[  527.295289] usb 3-3: new high-speed USB device number 12 using xhci_hcd
[  527.464099] usb 3-3: Device not responding to setup address.
[  527.668530] usb 3-3: Device not responding to setup address.
[  527.873180] usb 3-3: device not accepting address 12, error -71
[  528.170054] usb 3-3: new high-speed USB device number 14 using xhci_hcd
[  528.372346] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  528.372352] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  528.372355] usb 3-3: Product: 802.11 n WLAN
[  528.372358] usb 3-3: Manufacturer: Ralink
[  528.372360] usb 3-3: SerialNumber: 1.0
[  528.539394] usb 3-3: reset high-speed USB device number 14 using xhci_hcd
[  528.734806] ieee80211 phy172: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  528.744775] ieee80211 phy172: rt2x00_set_rf: Info - RF chipset 0008 detected
[  528.745035] ieee80211 phy172: Selected rate control algorithm 'minstrel_ht'
[  529.767122] rt2800usb 3-3:1.0 wlx000c0b470f52: renamed from wlan0
[  529.791245] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[  529.791295] ieee80211 phy172: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  529.791322] ieee80211 phy172: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[  529.956043] usb 3-3: USB disconnect, device number 14
[  530.007464] ieee80211 phy172: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x132c with error -19
[  530.015611] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[  530.336297] usb 3-3: new high-speed USB device number 15 using xhci_hcd
[  530.721372] usb 3-3: new high-speed USB device number 16 using xhci_hcd
[  536.029701] usb 3-3: new high-speed USB device number 17 using xhci_hcd
[  541.222957] usb 3-3: device descriptor read/all, error -110
[  541.519329] usb 3-3: new high-speed USB device number 19 using xhci_hcd
[  541.687658] usb 3-3: Device not responding to setup address.
[  541.891955] usb 3-3: Device not responding to setup address.
[  542.096231] usb 3-3: device not accepting address 19, error -71
[  542.392696] usb 3-3: new high-speed USB device number 21 using xhci_hcd
[  542.594571] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  542.594574] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  542.594576] usb 3-3: Product: 802.11 n WLAN
[  542.594578] usb 3-3: Manufacturer: Ralink
[  542.594579] usb 3-3: SerialNumber: 1.0
[  542.705164] ieee80211 phy173: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  542.705168] ieee80211 phy173: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  542.705170] ieee80211 phy173: rt2x00lib_probe_dev: Error - Failed to allocate device
[  542.705301] usb 3-3: USB disconnect, device number 21
[  544.363396] usb 3-4: new high-speed USB device number 22 using xhci_hcd
[  549.665789] usb 3-4: new high-speed USB device number 23 using xhci_hcd
[  549.867834] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  549.867840] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  549.867843] usb 3-4: Product: 802.11 n WLAN
[  549.867846] usb 3-4: Manufacturer: Ralink
[  549.867848] usb 3-4: SerialNumber: 1.0
[  550.034460] usb 3-4: reset high-speed USB device number 23 using xhci_hcd
[  550.229449] ieee80211 phy174: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  550.239417] ieee80211 phy174: rt2x00_set_rf: Info - RF chipset 0008 detected
[  550.239675] ieee80211 phy174: Selected rate control algorithm 'minstrel_ht'
[  550.264058] usb 3-4: USB disconnect, device number 23
[  550.570763] usb 3-4: new high-speed USB device number 24 using xhci_hcd
[  550.923138] usb 3-4: new high-speed USB device number 25 using xhci_hcd
[  551.124983] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  551.124987] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  551.124989] usb 3-4: Product: 802.11 n WLAN
[  551.124990] usb 3-4: Manufacturer: Ralink
[  551.124991] usb 3-4: SerialNumber: 1.0
[  551.291731] usb 3-4: reset high-speed USB device number 25 using xhci_hcd
[  551.486774] ieee80211 phy175: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  551.496685] ieee80211 phy175: rt2x00_set_rf: Info - RF chipset 0008 detected
[  551.496931] ieee80211 phy175: Selected rate control algorithm 'minstrel_ht'
[  552.393685] usb 3-4: USB disconnect, device number 25
[  552.688894] usb 3-4: new high-speed USB device number 26 using xhci_hcd
[  553.077226] usb 3-4: new high-speed USB device number 27 using xhci_hcd
[  553.278617] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  553.278620] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  553.278622] usb 3-4: Product: 802.11 n WLAN
[  553.278623] usb 3-4: Manufacturer: Ralink
[  553.278625] usb 3-4: SerialNumber: 1.0
[  553.445721] usb 3-4: reset high-speed USB device number 27 using xhci_hcd
[  553.640698] ieee80211 phy176: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  553.650770] ieee80211 phy176: rt2x00_set_rf: Info - RF chipset 0008 detected
[  553.651159] ieee80211 phy176: Selected rate control algorithm 'minstrel_ht'
[  554.167475] usb 3-4: USB disconnect, device number 27
[  554.482583] usb 3-4: new high-speed USB device number 28 using xhci_hcd
[  559.786905] usb 3-4: new high-speed USB device number 29 using xhci_hcd
[  559.988294] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  559.988297] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  559.988299] usb 3-4: Product: 802.11 n WLAN
[  559.988300] usb 3-4: Manufacturer: Ralink
[  559.988301] usb 3-4: SerialNumber: 1.0
[  560.155376] usb 3-4: reset high-speed USB device number 29 using xhci_hcd
[  560.350341] ieee80211 phy177: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  560.360539] ieee80211 phy177: rt2x00_set_rf: Info - RF chipset 0008 detected
[  560.360820] ieee80211 phy177: Selected rate control algorithm 'minstrel_ht'
[  560.542062] usb 3-4: USB disconnect, device number 29
[  560.851751] usb 3-4: new high-speed USB device number 30 using xhci_hcd
[  561.053338] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  561.053342] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  561.053344] usb 3-4: Product: 802.11 n WLAN
[  561.053345] usb 3-4: Manufacturer: Ralink
[  561.053347] usb 3-4: SerialNumber: 1.0
[  561.220253] usb 3-4: reset high-speed USB device number 30 using xhci_hcd
[  561.418912] ieee80211 phy178: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  561.428828] ieee80211 phy178: rt2x00_set_rf: Info - RF chipset 0008 detected
[  561.429094] ieee80211 phy178: Selected rate control algorithm 'minstrel_ht'
[  562.072169] usb 3-4: USB disconnect, device number 30
[  562.384827] usb 3-4: new high-speed USB device number 31 using xhci_hcd
[  562.586163] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  562.586167] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  562.586169] usb 3-4: Product: 802.11 n WLAN
[  562.586171] usb 3-4: Manufacturer: Ralink
[  562.586172] usb 3-4: SerialNumber: 1.0
[  562.753204] usb 3-4: reset high-speed USB device number 31 using xhci_hcd
[  567.812445] ieee80211 phy179: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  567.812450] ieee80211 phy179: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  567.812451] ieee80211 phy179: rt2x00lib_probe_dev: Error - Failed to allocate device
[  567.812611] usb 3-4: USB disconnect, device number 31
[  568.052571] usb 3-4: new high-speed USB device number 32 using xhci_hcd
[  568.253953] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  568.253957] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  568.253958] usb 3-4: Product: 802.11 n WLAN
[  568.253960] usb 3-4: Manufacturer: Ralink
[  568.253961] usb 3-4: SerialNumber: 1.0
[  568.421066] usb 3-4: reset high-speed USB device number 32 using xhci_hcd
[  568.616003] ieee80211 phy180: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  568.625941] ieee80211 phy180: rt2x00_set_rf: Info - RF chipset 0008 detected
[  568.626219] ieee80211 phy180: Selected rate control algorithm 'minstrel_ht'
[  569.091684] usb 3-4: USB disconnect, device number 32
[  569.401393] usb 3-4: new high-speed USB device number 33 using xhci_hcd
[  569.602908] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  569.602912] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  569.602914] usb 3-4: Product: 802.11 n WLAN
[  569.602915] usb 3-4: Manufacturer: Ralink
[  569.602917] usb 3-4: SerialNumber: 1.0
[  569.773723] usb 3-4: reset high-speed USB device number 33 using xhci_hcd
[  569.916728] ieee80211 phy181: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  569.926704] ieee80211 phy181: rt2x00_set_rf: Info - RF chipset 0008 detected
[  569.926954] ieee80211 phy181: Selected rate control algorithm 'minstrel_ht'
[  570.227523] usb 3-4: USB disconnect, device number 33
[  570.538107] usb 3-4: new high-speed USB device number 34 using xhci_hcd
[  570.706269] usb 3-4: Device not responding to setup address.
[  570.910328] usb 3-4: Device not responding to setup address.
[  571.114397] usb 3-4: device not accepting address 34, error -71
[  571.410570] usb 3-4: new high-speed USB device number 36 using xhci_hcd
[  571.611851] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  571.611855] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  571.611857] usb 3-4: Product: 802.11 n WLAN
[  571.611858] usb 3-4: Manufacturer: Ralink
[  571.611859] usb 3-4: SerialNumber: 1.0
[  571.778970] usb 3-4: reset high-speed USB device number 36 using xhci_hcd
[  571.973995] ieee80211 phy182: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  571.984080] ieee80211 phy182: rt2x00_set_rf: Info - RF chipset 0008 detected
[  571.984341] ieee80211 phy182: Selected rate control algorithm 'minstrel_ht'
[  572.101868] usb 3-4: USB disconnect, device number 36
[  572.415111] usb 3-4: new high-speed USB device number 37 using xhci_hcd
[  572.616546] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  572.616556] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  572.616560] usb 3-4: Product: 802.11 n WLAN
[  572.616563] usb 3-4: Manufacturer: Ralink
[  572.616566] usb 3-4: SerialNumber: 1.0
[  572.783534] usb 3-4: reset high-speed USB device number 37 using xhci_hcd
[  577.817197] ieee80211 phy183: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  577.817202] ieee80211 phy183: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  577.817203] ieee80211 phy183: rt2x00lib_probe_dev: Error - Failed to allocate device
[  577.817342] usb 3-4: USB disconnect, device number 37
[  578.059240] usb 3-4: new high-speed USB device number 38 using xhci_hcd
[  578.259259] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  578.259263] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  578.259265] usb 3-4: Product: 802.11 n WLAN
[  578.259266] usb 3-4: Manufacturer: Ralink
[  578.259268] usb 3-4: SerialNumber: 1.0
[  578.428627] usb 3-4: reset high-speed USB device number 38 using xhci_hcd
[  578.621771] ieee80211 phy184: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  578.631786] ieee80211 phy184: rt2x00_set_rf: Info - RF chipset 0008 detected
[  578.632087] ieee80211 phy184: Selected rate control algorithm 'minstrel_ht'
[  579.726146] usb 3-4: USB disconnect, device number 38
[  580.044823] usb 3-4: new high-speed USB device number 39 using xhci_hcd
[  580.250475] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  580.250478] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  580.250480] usb 3-4: Product: 802.11 n WLAN
[  580.250482] usb 3-4: Manufacturer: Ralink
[  580.250483] usb 3-4: SerialNumber: 1.0
[  580.418429] usb 3-4: reset high-speed USB device number 39 using xhci_hcd
[  580.611643] ieee80211 phy185: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  580.621584] ieee80211 phy185: rt2x00_set_rf: Info - RF chipset 0008 detected
[  580.621875] ieee80211 phy185: Selected rate control algorithm 'minstrel_ht'
[  581.191584] usb 3-4: USB disconnect, device number 39
[  581.483495] usb 3-4: new high-speed USB device number 40 using xhci_hcd
[  581.683755] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  581.683760] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  581.683763] usb 3-4: Product: 802.11 n WLAN
[  581.683765] usb 3-4: Manufacturer: Ralink
[  581.683767] usb 3-4: SerialNumber: 1.0
[  581.849291] usb 3-4: reset high-speed USB device number 40 using xhci_hcd
[  581.960522] ieee80211 phy186: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  581.960526] ieee80211 phy186: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  581.960528] ieee80211 phy186: rt2x00lib_probe_dev: Error - Failed to allocate device
[  581.960667] usb 3-4: USB disconnect, device number 40
[  582.230796] usb 3-4: new high-speed USB device number 41 using xhci_hcd
[  582.612669] usb 3-4: new high-speed USB device number 42 using xhci_hcd
[  582.779659] usb 3-4: Device not responding to setup address.
[  582.982472] usb 3-4: Device not responding to setup address.
[  583.185220] usb 3-4: device not accepting address 42, error -71
[  583.479561] usb 3-4: new high-speed USB device number 44 using xhci_hcd
[  583.683826] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  583.683830] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  583.683832] usb 3-4: Product: 802.11 n WLAN
[  583.683833] usb 3-4: Manufacturer: Ralink
[  583.683835] usb 3-4: SerialNumber: 1.0
[  583.849676] usb 3-4: reset high-speed USB device number 44 using xhci_hcd
[  589.013026] usb 3-4: device firmware changed
[  589.013073] ieee80211 phy187: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  589.013078] ieee80211 phy187: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  589.013080] ieee80211 phy187: rt2x00lib_probe_dev: Error - Failed to allocate device
[  589.013282] usb 3-4: USB disconnect, device number 44
[  589.252050] usb 3-4: new high-speed USB device number 45 using xhci_hcd
[  589.789924] usb 3-4: new high-speed USB device number 46 using xhci_hcd
[  589.990301] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[  589.990305] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  589.990306] usb 3-4: Product: 802.11 n WLAN
[  589.990308] usb 3-4: Manufacturer: Ralink
[  589.990309] usb 3-4: SerialNumber: 1.0
[  590.156802] usb 3-4: reset high-speed USB device number 46 using xhci_hcd
[  590.350948] ieee80211 phy188: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  590.360905] ieee80211 phy188: rt2x00_set_rf: Info - RF chipset 0008 detected
[  590.361156] ieee80211 phy188: Selected rate control algorithm 'minstrel_ht'
[  591.371928] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[  591.397893] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[  591.397950] ieee80211 phy188: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  591.397982] ieee80211 phy188: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[  591.483891] usb 3-4: USB disconnect, device number 46
[  591.535421] ieee80211 phy188: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x65c8 with error -19
[  591.565256] ieee80211 phy188: rt2800_wait_bbp_ready: Error - BBP register access failed, aborting
[  591.565262] ieee80211 phy188: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)
[  591.866200] usb 3-4: new high-speed USB device number 47 using xhci_hcd
[  597.146166] usb 3-4: new high-speed USB device number 48 using xhci_hcd
[  602.429767] usb 3-4: new high-speed USB device number 49 using xhci_hcd
[  607.716080] usb 3-4: new high-speed USB device number 50 using xhci_hcd
[  613.004312] usb 3-4: new high-speed USB device number 51 using xhci_hcd
[  618.297922] usb 3-4: new high-speed USB device number 52 using xhci_hcd
[  623.596874] usb 3-4: new high-speed USB device number 53 using xhci_hcd
[  628.887655] usb 3-4: new high-speed USB device number 54 using xhci_hcd
[  634.179422] usb 3-4: new high-speed USB device number 55 using xhci_hcd
[  639.471418] usb 3-4: new high-speed USB device number 56 using xhci_hcd
[  644.763773] usb 3-4: new high-speed USB device number 57 using xhci_hcd
[  650.056299] usb 3-4: new high-speed USB device number 58 using xhci_hcd
[  655.756657] usb 3-3: new high-speed USB device number 59 using xhci_hcd
[  656.108408] usb 3-3: new high-speed USB device number 60 using xhci_hcd
[  656.309517] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  656.309521] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  656.309522] usb 3-3: Product: 802.11 n WLAN
[  656.309524] usb 3-3: Manufacturer: Ralink
[  656.309525] usb 3-3: SerialNumber: 1.0
[  656.476234] usb 3-3: reset high-speed USB device number 60 using xhci_hcd
[  656.588115] ieee80211 phy189: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  656.588127] ieee80211 phy189: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  656.588134] ieee80211 phy189: rt2x00lib_probe_dev: Error - Failed to allocate device
[  656.588416] usb 3-3: USB disconnect, device number 60
[  656.827847] usb 3-3: new high-speed USB device number 61 using xhci_hcd
[  657.179696] usb 3-3: new high-speed USB device number 62 using xhci_hcd
[  657.647444] usb 3-3: new high-speed USB device number 63 using xhci_hcd
[  657.848573] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  657.848578] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  657.848581] usb 3-3: Product: 802.11 n WLAN
[  657.848583] usb 3-3: Manufacturer: Ralink
[  657.848585] usb 3-3: SerialNumber: 1.0
[  657.911209] ieee80211 phy190: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  657.911214] ieee80211 phy190: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  657.911215] ieee80211 phy190: rt2x00lib_probe_dev: Error - Failed to allocate device
[  657.911353] usb 3-3: USB disconnect, device number 63
[  658.183047] usb 3-3: new high-speed USB device number 64 using xhci_hcd
[  658.384498] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  658.384502] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  658.384504] usb 3-3: Product: 802.11 n WLAN
[  658.384506] usb 3-3: Manufacturer: Ralink
[  658.384507] usb 3-3: SerialNumber: 1.0
[  658.550931] usb 3-3: reset high-speed USB device number 64 using xhci_hcd
[  658.718849] usb 3-3: Device not responding to setup address.
[  658.922648] usb 3-3: Device not responding to setup address.
[  659.130430] usb 3-3: device not accepting address 64, error -71
[  659.186443] ieee80211 phy191: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  659.186448] ieee80211 phy191: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  659.186450] ieee80211 phy191: rt2x00lib_probe_dev: Error - Failed to allocate device
[  659.186581] usb 3-3: USB disconnect, device number 64
[  659.426230] usb 3-3: new high-speed USB device number 65 using xhci_hcd
[  659.627171] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  659.627175] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  659.627176] usb 3-3: Product: 802.11 n WLAN
[  659.627178] usb 3-3: Manufacturer: Ralink
[  659.627179] usb 3-3: SerialNumber: 1.0
[  659.794125] usb 3-3: reset high-speed USB device number 65 using xhci_hcd
[  659.988938] ieee80211 phy192: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  659.998945] ieee80211 phy192: rt2x00_set_rf: Info - RF chipset 0008 detected
[  659.999201] ieee80211 phy192: Selected rate control algorithm 'minstrel_ht'
[  660.049366] usb 3-3: USB disconnect, device number 65
[  660.349714] usb 3-3: new high-speed USB device number 66 using xhci_hcd
[  665.642460] usb 3-3: new high-speed USB device number 67 using xhci_hcd
[  665.843564] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  665.843567] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  665.843569] usb 3-3: Product: 802.11 n WLAN
[  665.843571] usb 3-3: Manufacturer: Ralink
[  665.843572] usb 3-3: SerialNumber: 1.0
[  666.010387] usb 3-3: reset high-speed USB device number 67 using xhci_hcd
[  666.204898] ieee80211 phy193: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  666.214839] ieee80211 phy193: rt2x00_set_rf: Info - RF chipset 0008 detected
[  666.215092] ieee80211 phy193: Selected rate control algorithm 'minstrel_ht'
[  666.357068] usb 3-3: USB disconnect, device number 67
[  666.653790] usb 3-3: new high-speed USB device number 68 using xhci_hcd
[  671.946693] usb 3-3: new high-speed USB device number 69 using xhci_hcd
[  672.298188] usb 3-3: new high-speed USB device number 70 using xhci_hcd
[  672.499619] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  672.499623] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  672.499625] usb 3-3: Product: 802.11 n WLAN
[  672.499627] usb 3-3: Manufacturer: Ralink
[  672.499629] usb 3-3: SerialNumber: 1.0
[  672.553898] ieee80211 phy194: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  672.553902] ieee80211 phy194: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  672.553904] ieee80211 phy194: rt2x00lib_probe_dev: Error - Failed to allocate device
[  672.554037] usb 3-3: USB disconnect, device number 70
[  672.793520] usb 3-3: new high-speed USB device number 71 using xhci_hcd
[  672.995010] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  672.995014] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  672.995016] usb 3-3: Product: 802.11 n WLAN
[  672.995018] usb 3-3: Manufacturer: Ralink
[  672.995019] usb 3-3: SerialNumber: 1.0
[  673.113296] usb 3-3: reset high-speed USB device number 71 using xhci_hcd
[  678.163506] ieee80211 phy195: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  678.163510] ieee80211 phy195: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  678.163512] ieee80211 phy195: rt2x00lib_probe_dev: Error - Failed to allocate device
[  678.163645] usb 3-3: USB disconnect, device number 71
[  678.403116] usb 3-3: new high-speed USB device number 72 using xhci_hcd
[  678.754751] usb 3-3: new high-speed USB device number 73 using xhci_hcd
[  678.922608] usb 3-3: Device not responding to setup address.
[  679.126366] usb 3-3: Device not responding to setup address.
[  679.330158] usb 3-3: device not accepting address 73, error -71
[  679.625855] usb 3-3: new high-speed USB device number 75 using xhci_hcd
[  679.826876] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  679.826880] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  679.826881] usb 3-3: Product: 802.11 n WLAN
[  679.826883] usb 3-3: Manufacturer: Ralink
[  679.826884] usb 3-3: SerialNumber: 1.0
[  679.993632] usb 3-3: reset high-speed USB device number 75 using xhci_hcd
[  685.044798] ieee80211 phy196: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  685.044804] ieee80211 phy196: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  685.044807] ieee80211 phy196: rt2x00lib_probe_dev: Error - Failed to allocate device
[  685.044940] usb 3-3: USB disconnect, device number 75
[  685.284505] usb 3-3: new high-speed USB device number 76 using xhci_hcd
[  685.485522] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  685.485527] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  685.485529] usb 3-3: Product: 802.11 n WLAN
[  685.485531] usb 3-3: Manufacturer: Ralink
[  685.485533] usb 3-3: SerialNumber: 1.0
[  685.652465] usb 3-3: reset high-speed USB device number 76 using xhci_hcd
[  685.764156] ieee80211 phy197: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  685.764162] ieee80211 phy197: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  685.764165] ieee80211 phy197: rt2x00lib_probe_dev: Error - Failed to allocate device
[  685.764294] usb 3-3: USB disconnect, device number 76
[  686.035861] usb 3-3: new high-speed USB device number 77 using xhci_hcd
[  686.237095] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  686.237098] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  686.237100] usb 3-3: Product: 802.11 n WLAN
[  686.237102] usb 3-3: Manufacturer: Ralink
[  686.237103] usb 3-3: SerialNumber: 1.0
[  686.403831] usb 3-3: reset high-speed USB device number 77 using xhci_hcd
[  686.598403] ieee80211 phy198: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  686.608362] ieee80211 phy198: rt2x00_set_rf: Info - RF chipset 0008 detected
[  686.608625] ieee80211 phy198: Selected rate control algorithm 'minstrel_ht'
[  686.703394] usb 3-3: USB disconnect, device number 77
[  687.015065] usb 3-3: new high-speed USB device number 78 using xhci_hcd
[  687.183007] usb 3-3: Device not responding to setup address.
[  687.386752] usb 3-3: Device not responding to setup address.
[  687.590582] usb 3-3: device not accepting address 78, error -71
[  687.886359] usb 3-3: new high-speed USB device number 80 using xhci_hcd
[  688.088045] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  688.088052] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  688.088055] usb 3-3: Product: 802.11 n WLAN
[  688.088057] usb 3-3: Manufacturer: Ralink
[  688.088059] usb 3-3: SerialNumber: 1.0
[  688.254116] usb 3-3: reset high-speed USB device number 80 using xhci_hcd
[  688.448626] ieee80211 phy199: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  688.459127] ieee80211 phy199: rt2x00_set_rf: Info - RF chipset 0008 detected
[  688.459515] ieee80211 phy199: Selected rate control algorithm 'minstrel_ht'
[  688.555413] usb 3-3: USB disconnect, device number 80
[  688.857557] usb 3-3: new high-speed USB device number 81 using xhci_hcd
[  689.025401] usb 3-3: Device not responding to setup address.
[  689.229321] usb 3-3: Device not responding to setup address.
[  689.433054] usb 3-3: device not accepting address 81, error -71
[  689.728761] usb 3-3: new high-speed USB device number 83 using xhci_hcd
[  690.108515] usb 3-3: new high-speed USB device number 84 using xhci_hcd
[  690.309771] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  690.309774] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  690.309776] usb 3-3: Product: 802.11 n WLAN
[  690.309778] usb 3-3: Manufacturer: Ralink
[  690.309779] usb 3-3: SerialNumber: 1.0
[  690.476375] usb 3-3: reset high-speed USB device number 84 using xhci_hcd
[  690.671127] ieee80211 phy200: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  690.681078] ieee80211 phy200: rt2x00_set_rf: Info - RF chipset 0008 detected
[  690.681362] ieee80211 phy200: Selected rate control algorithm 'minstrel_ht'
[  691.118767] usb 3-3: USB disconnect, device number 84
[  691.427511] usb 3-3: new high-speed USB device number 85 using xhci_hcd
[  691.779162] usb 3-3: new high-speed USB device number 86 using xhci_hcd
[  691.980610] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  691.980614] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  691.980616] usb 3-3: Product: 802.11 n WLAN
[  691.980618] usb 3-3: Manufacturer: Ralink
[  691.980619] usb 3-3: SerialNumber: 1.0
[  692.147138] usb 3-3: reset high-speed USB device number 86 using xhci_hcd
[  692.341854] ieee80211 phy201: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  692.351806] ieee80211 phy201: rt2x00_set_rf: Info - RF chipset 0008 detected
[  692.352064] ieee80211 phy201: Selected rate control algorithm 'minstrel_ht'
[  692.538336] usb 3-3: USB disconnect, device number 86
[  692.830380] usb 3-3: new high-speed USB device number 87 using xhci_hcd
[  698.122436] usb 3-3: new high-speed USB device number 88 using xhci_hcd
[  698.538178] usb 3-3: new high-speed USB device number 89 using xhci_hcd
[  698.739896] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  698.739900] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  698.739902] usb 3-3: Product: 802.11 n WLAN
[  698.739903] usb 3-3: Manufacturer: Ralink
[  698.739904] usb 3-3: SerialNumber: 1.0
[  698.906312] usb 3-3: reset high-speed USB device number 89 using xhci_hcd
[  699.101157] ieee80211 phy202: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  699.111582] ieee80211 phy202: rt2x00_set_rf: Info - RF chipset 0008 detected
[  699.111988] ieee80211 phy202: Selected rate control algorithm 'minstrel_ht'
[  699.344913] usb 3-3: USB disconnect, device number 89
[  699.653400] usb 3-3: new high-speed USB device number 90 using xhci_hcd
[  704.945704] usb 3-3: new high-speed USB device number 91 using xhci_hcd
[  705.146739] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  705.146742] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  705.146744] usb 3-3: Product: 802.11 n WLAN
[  705.146745] usb 3-3: Manufacturer: Ralink
[  705.146746] usb 3-3: SerialNumber: 1.0
[  705.313590] usb 3-3: reset high-speed USB device number 91 using xhci_hcd
[  705.508101] ieee80211 phy203: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  705.518328] ieee80211 phy203: rt2x00_set_rf: Info - RF chipset 0008 detected
[  705.518609] ieee80211 phy203: Selected rate control algorithm 'minstrel_ht'
[  706.515748] usb 3-3: USB disconnect, device number 91
[  706.812532] usb 3-3: new high-speed USB device number 92 using xhci_hcd
[  707.014027] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  707.014031] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  707.014033] usb 3-3: Product: 802.11 n WLAN
[  707.014034] usb 3-3: Manufacturer: Ralink
[  707.014035] usb 3-3: SerialNumber: 1.0
[  707.124403] ieee80211 phy204: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  707.124409] ieee80211 phy204: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  707.124411] ieee80211 phy204: rt2x00lib_probe_dev: Error - Failed to allocate device
[  707.124547] usb 3-3: USB disconnect, device number 92
[  707.364167] usb 3-3: new high-speed USB device number 93 using xhci_hcd
[  707.565604] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[  707.565607] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  707.565609] usb 3-3: Product: 802.11 n WLAN
[  707.565611] usb 3-3: Manufacturer: Ralink
[  707.565612] usb 3-3: SerialNumber: 1.0
[  707.732070] usb 3-3: reset high-speed USB device number 93 using xhci_hcd
[  707.926554] ieee80211 phy205: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[  707.936650] ieee80211 phy205: rt2x00_set_rf: Info - RF chipset 0008 detected
[  708.039711] ieee80211 phy205: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0228 with error -110
[  708.039873] ieee80211 phy205: Selected rate control algorithm 'minstrel_ht'
[  708.040465] usb 3-3: USB disconnect, device number 93
[  708.355517] usb 3-3: new high-speed USB device number 94 using xhci_hcd
[  713.648119] usb 3-3: new high-speed USB device number 95 using xhci_hcd
[  718.940745] usb 3-3: new high-speed USB device number 96 using xhci_hcd
[  724.233527] usb 3-3: new high-speed USB device number 97 using xhci_hcd
[  729.526323] usb 3-3: new high-speed USB device number 98 using xhci_hcd
[  734.819241] usb 3-3: new high-speed USB device number 99 using xhci_hcd
[  740.111159] usb 3-3: new high-speed USB device number 100 using xhci_hcd
[  745.403226] usb 3-3: new high-speed USB device number 101 using xhci_hcd
[  750.695395] usb 3-3: new high-speed USB device number 102 using xhci_hcd
[  755.987731] usb 3-3: new high-speed USB device number 103 using xhci_hcd
[  761.279971] usb 3-3: new high-speed USB device number 104 using xhci_hcd
[  766.572444] usb 3-3: new high-speed USB device number 105 using xhci_hcd
[  771.864872] usb 3-3: new high-speed USB device number 106 using xhci_hcd
[  777.157425] usb 3-3: new high-speed USB device number 107 using xhci_hcd
[  782.450043] usb 3-3: new high-speed USB device number 108 using xhci_hcd
[  787.742775] usb 3-3: new high-speed USB device number 109 using xhci_hcd
[  793.039436] usb 3-3: new high-speed USB device number 110 using xhci_hcd
[  798.332174] usb 3-3: new high-speed USB device number 111 using xhci_hcd
[  803.624938] usb 3-3: new high-speed USB device number 112 using xhci_hcd
[  808.917709] usb 3-3: new high-speed USB device number 113 using xhci_hcd
[  814.210468] usb 3-3: new high-speed USB device number 114 using xhci_hcd
[  819.503317] usb 3-3: new high-speed USB device number 115 using xhci_hcd
[  824.808116] usb 3-3: new high-speed USB device number 116 using xhci_hcd
[  830.100940] usb 3-3: new high-speed USB device number 117 using xhci_hcd
[  835.393860] usb 3-3: new high-speed USB device number 118 using xhci_hcd
[  839.807204] INFO: task colord-sane:12566 blocked for more than 120 seconds.
[  839.807208]       Not tainted 4.4.0-51-generic #72-Ubuntu
[  839.807209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  839.807210] colord-sane     D ffff8800ae9dfd78     0 12566   1364 0x00000000
[  839.807214]  ffff8800ae9dfd78 ffff88011c4a1b80 ffff88012a4f2940 ffff88011c4a1b80
[  839.807217]  ffff8800ae9e0000 ffff88003fa118fc ffff88011c4a1b80 00000000ffffffff
[  839.807218]  ffff88003fa11900 ffff8800ae9dfd90 ffffffff81831f45 ffff88003fa118f8
[  839.807220] Call Trace:
[  839.807226]  [<ffffffff81831f45>] schedule+0x35/0x80
[  839.807229]  [<ffffffff818321ee>] schedule_preempt_disabled+0xe/0x10
[  839.807231]  [<ffffffff81833e29>] __mutex_lock_slowpath+0xb9/0x130
[  839.807233]  [<ffffffff81833ebf>] mutex_lock+0x1f/0x30
[  839.807236]  [<ffffffff816263d7>] read_descriptors+0x37/0x100
[  839.807241]  [<ffffffff8128dada>] sysfs_kf_bin_read+0x4a/0x70
[  839.807243]  [<ffffffff8128d01b>] kernfs_fop_read+0xab/0x160
[  839.807247]  [<ffffffff8120d648>] __vfs_read+0x18/0x40
[  839.807249]  [<ffffffff8120dc16>] vfs_read+0x86/0x130
[  839.807251]  [<ffffffff8120e965>] SyS_read+0x55/0xc0
[  839.807254]  [<ffffffff81836032>] entry_SYSCALL_64_fastpath+0x16/0x71
[  839.807257] INFO: task systemd-udevd:12625 blocked for more than 120 seconds.
[  839.807258]       Not tainted 4.4.0-51-generic #72-Ubuntu
[  839.807259] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  839.807260] systemd-udevd   D ffff880129d8bce8     0 12625    281 0x00000000
[  839.807262]  ffff880129d8bce8 ffff880129d8bcb8 ffff88012a4f0dc0 ffff880093142940
[  839.807264]  ffff880129d8c000 ffff88003fa118fc ffff880093142940 00000000ffffffff
[  839.807265]  ffff88003fa11900 ffff880129d8bd00 ffffffff81831f45 ffff88003fa118f8
[  839.807267] Call Trace:
[  839.807269]  [<ffffffff81831f45>] schedule+0x35/0x80
[  839.807271]  [<ffffffff818321ee>] schedule_preempt_disabled+0xe/0x10
[  839.807273]  [<ffffffff81833e29>] __mutex_lock_slowpath+0xb9/0x130
[  839.807275]  [<ffffffff81833ebf>] mutex_lock+0x1f/0x30
[  839.807277]  [<ffffffff81625cd0>] product_show+0x20/0x50
[  839.807280]  [<ffffffff815544c0>] dev_attr_show+0x20/0x50
[  839.807282]  [<ffffffff81833eb2>] ? mutex_lock+0x12/0x30
[  839.807285]  [<ffffffff8128df5c>] sysfs_kf_seq_show+0xbc/0x130
[  839.807287]  [<ffffffff8128c783>] kernfs_seq_show+0x23/0x30
[  839.807290]  [<ffffffff8123210c>] seq_read+0xec/0x390
[  839.807292]  [<ffffffff8128d07a>] kernfs_fop_read+0x10a/0x160
[  839.807295]  [<ffffffff81345490>] ? security_file_permission+0xa0/0xc0
[  839.807297]  [<ffffffff8120d648>] __vfs_read+0x18/0x40
[  839.807299]  [<ffffffff8120dc16>] vfs_read+0x86/0x130
[  839.807301]  [<ffffffff8120e965>] SyS_read+0x55/0xc0
[  839.807304]  [<ffffffff81836032>] entry_SYSCALL_64_fastpath+0x16/0x71
[  840.686651] usb 3-3: new high-speed USB device number 119 using xhci_hcd
[  845.983511] usb 3-3: new high-speed USB device number 120 using xhci_hcd
[  851.276444] usb 3-3: new high-speed USB device number 121 using xhci_hcd
[  856.569365] usb 3-3: new high-speed USB device number 122 using xhci_hcd
[  861.866144] usb 3-3: new high-speed USB device number 123 using xhci_hcd
[  867.170095] usb 3-3: new high-speed USB device number 124 using xhci_hcd
[  872.478399] usb 3-3: new high-speed USB device number 125 using xhci_hcd
[  877.784628] usb 3-3: new high-speed USB device number 126 using xhci_hcd
[  883.088953] usb 3-3: new high-speed USB device number 127 using xhci_hcd
[  888.207770] usb 3-3: device descriptor read/64, error -110
[  903.621558] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[  908.920689] usb 3-3: new high-speed USB device number 5 using xhci_hcd
[  914.219152] usb 3-3: new high-speed USB device number 8 using xhci_hcd
[  919.517003] usb 3-3: new high-speed USB device number 9 using xhci_hcd
[  924.814424] usb 3-3: new high-speed USB device number 10 using xhci_hcd
[  929.927427] usb 3-3: device descriptor read/64, error -110
[  945.332713] usb 3-3: new high-speed USB device number 11 using xhci_hcd
[  950.444716] usb 3-3: device descriptor read/64, error -110
[  959.864393] INFO: task colord-sane:12566 blocked for more than 120 seconds.
[  959.864406]       Not tainted 4.4.0-51-generic #72-Ubuntu
[  959.864410] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  959.864415] colord-sane     D ffff8800ae9dfd78     0 12566   1364 0x00000000
[  959.864427]  ffff8800ae9dfd78 ffff88011c4a1b80 ffff88012a4f2940 ffff88011c4a1b80
[  959.864436]  ffff8800ae9e0000 ffff88003fa118fc ffff88011c4a1b80 00000000ffffffff
[  959.864443]  ffff88003fa11900 ffff8800ae9dfd90 ffffffff81831f45 ffff88003fa118f8
[  959.864451] Call Trace:
[  959.864468]  [<ffffffff81831f45>] schedule+0x35/0x80
[  959.864477]  [<ffffffff818321ee>] schedule_preempt_disabled+0xe/0x10
[  959.864485]  [<ffffffff81833e29>] __mutex_lock_slowpath+0xb9/0x130
[  959.864492]  [<ffffffff81833ebf>] mutex_lock+0x1f/0x30
[  959.864503]  [<ffffffff816263d7>] read_descriptors+0x37/0x100
[  959.864516]  [<ffffffff8128dada>] sysfs_kf_bin_read+0x4a/0x70
[  959.864524]  [<ffffffff8128d01b>] kernfs_fop_read+0xab/0x160
[  959.864535]  [<ffffffff8120d648>] __vfs_read+0x18/0x40
[  959.864543]  [<ffffffff8120dc16>] vfs_read+0x86/0x130
[  959.864551]  [<ffffffff8120e965>] SyS_read+0x55/0xc0
[  959.864559]  [<ffffffff81836032>] entry_SYSCALL_64_fastpath+0x16/0x71
[  959.864568] INFO: task systemd-udevd:12625 blocked for more than 120 seconds.
[  959.864574]       Not tainted 4.4.0-51-generic #72-Ubuntu
[  959.864577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  959.864582] systemd-udevd   D ffff880129d8bce8     0 12625    281 0x00000004
[  959.864590]  ffff880129d8bce8 ffff880129d8bcb8 ffff88012a4f0dc0 ffff880093142940
[  959.864598]  ffff880129d8c000 ffff88003fa118fc ffff880093142940 00000000ffffffff
[  959.864606]  ffff88003fa11900 ffff880129d8bd00 ffffffff81831f45 ffff88003fa118f8
[  959.864613] Call Trace:
[  959.864621]  [<ffffffff81831f45>] schedule+0x35/0x80
[  959.864629]  [<ffffffff818321ee>] schedule_preempt_disabled+0xe/0x10
[  959.864637]  [<ffffffff81833e29>] __mutex_lock_slowpath+0xb9/0x130
[  959.864644]  [<ffffffff81833ebf>] mutex_lock+0x1f/0x30
[  959.864652]  [<ffffffff81625cd0>] product_show+0x20/0x50
[  959.864662]  [<ffffffff815544c0>] dev_attr_show+0x20/0x50
[  959.864669]  [<ffffffff81833eb2>] ? mutex_lock+0x12/0x30
[  959.864679]  [<ffffffff8128df5c>] sysfs_kf_seq_show+0xbc/0x130
[  959.864688]  [<ffffffff8128c783>] kernfs_seq_show+0x23/0x30
[  959.864697]  [<ffffffff8123210c>] seq_read+0xec/0x390
[  959.864706]  [<ffffffff8128d07a>] kernfs_fop_read+0x10a/0x160
[  959.864715]  [<ffffffff81345490>] ? security_file_permission+0xa0/0xc0
[  959.864723]  [<ffffffff8120d648>] __vfs_read+0x18/0x40
[  959.864731]  [<ffffffff8120dc16>] vfs_read+0x86/0x130
[  959.864739]  [<ffffffff8120e965>] SyS_read+0x55/0xc0
[  959.864748]  [<ffffffff81836032>] entry_SYSCALL_64_fastpath+0x16/0x71
[  965.659868] usb 3-3: device descriptor read/64, error -110
[  965.875844] usb 3-3: new high-speed USB device number 12 using xhci_hcd
[  970.987336] usb 3-3: device descriptor read/64, error -110
[  986.385357] usb 3-3: new high-speed USB device number 13 using xhci_hcd
[  991.496603] usb 3-3: device descriptor read/64, error -110
[ 1006.931711] usb 3-3: new high-speed USB device number 14 using xhci_hcd
[ 1012.236442] usb 3-3: new high-speed USB device number 15 using xhci_hcd
[ 1017.539978] usb 3-3: new high-speed USB device number 16 using xhci_hcd
[ 1022.842428] usb 3-3: new high-speed USB device number 17 using xhci_hcd
[ 1028.143900] usb 3-3: new high-speed USB device number 18 using xhci_hcd
[ 1033.444663] usb 3-3: new high-speed USB device number 19 using xhci_hcd
[ 1038.748811] usb 3-3: new high-speed USB device number 20 using xhci_hcd
[ 1044.048387] usb 3-3: new high-speed USB device number 21 using xhci_hcd
[ 1049.347418] usb 3-3: new high-speed USB device number 22 using xhci_hcd
[ 1054.646122] usb 3-3: new high-speed USB device number 23 using xhci_hcd
[ 1059.944566] usb 3-3: new high-speed USB device number 24 using xhci_hcd
[ 1065.246615] usb 3-3: new high-speed USB device number 25 using xhci_hcd
[ 1070.544583] usb 3-3: new high-speed USB device number 26 using xhci_hcd
[ 1071.736195] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 1071.833167] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
[ 1072.037416] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 1075.842224] usb 3-3: new high-speed USB device number 27 using xhci_hcd
[ 1077.646700] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1077.646776] ACPI: \_SB_.PCI0.P0P2.VGA_: failed to evaluate _DSM
[ 1077.646780] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1077.646872] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 1077.646875] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 1077.646908] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 1077.652353] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 1079.947380] INFO: task colord-sane:12566 blocked for more than 120 seconds.
[ 1079.947384]       Not tainted 4.4.0-51-generic #72-Ubuntu
[ 1079.947385] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1079.947386] colord-sane     D ffff8800ae9dfd78     0 12566   1364 0x00000000
[ 1079.947390]  ffff8800ae9dfd78 ffff88011c4a1b80 ffff88012a4f2940 ffff88011c4a1b80
[ 1079.947392]  ffff8800ae9e0000 ffff88003fa118fc ffff88011c4a1b80 00000000ffffffff
[ 1079.947394]  ffff88003fa11900 ffff8800ae9dfd90 ffffffff81831f45 ffff88003fa118f8
[ 1079.947396] Call Trace:
[ 1079.947403]  [<ffffffff81831f45>] schedule+0x35/0x80
[ 1079.947405]  [<ffffffff818321ee>] schedule_preempt_disabled+0xe/0x10
[ 1079.947407]  [<ffffffff81833e29>] __mutex_lock_slowpath+0xb9/0x130
[ 1079.947410]  [<ffffffff81833ebf>] mutex_lock+0x1f/0x30
[ 1079.947414]  [<ffffffff816263d7>] read_descriptors+0x37/0x100
[ 1079.947419]  [<ffffffff8128dada>] sysfs_kf_bin_read+0x4a/0x70
[ 1079.947421]  [<ffffffff8128d01b>] kernfs_fop_read+0xab/0x160
[ 1079.947425]  [<ffffffff8120d648>] __vfs_read+0x18/0x40
[ 1079.947427]  [<ffffffff8120dc16>] vfs_read+0x86/0x130
[ 1079.947430]  [<ffffffff8120e965>] SyS_read+0x55/0xc0
[ 1079.947432]  [<ffffffff81836032>] entry_SYSCALL_64_fastpath+0x16/0x71
[ 1079.947435] INFO: task systemd-udevd:12625 blocked for more than 120 seconds.
[ 1079.947436]       Not tainted 4.4.0-51-generic #72-Ubuntu
[ 1079.947437] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1079.947438] systemd-udevd   D ffff880129d8bce8     0 12625    281 0x00000004
[ 1079.947440]  ffff880129d8bce8 ffff880129d8bcb8 ffff88012a4f0dc0 ffff880093142940
[ 1079.947442]  ffff880129d8c000 ffff88003fa118fc ffff880093142940 00000000ffffffff
[ 1079.947444]  ffff88003fa11900 ffff880129d8bd00 ffffffff81831f45 ffff88003fa118f8
[ 1079.947446] Call Trace:
[ 1079.947447]  [<ffffffff81831f45>] schedule+0x35/0x80
[ 1079.947449]  [<ffffffff818321ee>] schedule_preempt_disabled+0xe/0x10
[ 1079.947451]  [<ffffffff81833e29>] __mutex_lock_slowpath+0xb9/0x130
[ 1079.947453]  [<ffffffff81833ebf>] mutex_lock+0x1f/0x30
[ 1079.947455]  [<ffffffff81625cd0>] product_show+0x20/0x50
[ 1079.947458]  [<ffffffff815544c0>] dev_attr_show+0x20/0x50
[ 1079.947460]  [<ffffffff81833eb2>] ? mutex_lock+0x12/0x30
[ 1079.947462]  [<ffffffff8128df5c>] sysfs_kf_seq_show+0xbc/0x130
[ 1079.947464]  [<ffffffff8128c783>] kernfs_seq_show+0x23/0x30
[ 1079.947468]  [<ffffffff8123210c>] seq_read+0xec/0x390
[ 1079.947470]  [<ffffffff8128d07a>] kernfs_fop_read+0x10a/0x160
[ 1079.947473]  [<ffffffff81345490>] ? security_file_permission+0xa0/0xc0
[ 1079.947475]  [<ffffffff8120d648>] __vfs_read+0x18/0x40
[ 1079.947477]  [<ffffffff8120dc16>] vfs_read+0x86/0x130
[ 1079.947479]  [<ffffffff8120e965>] SyS_read+0x55/0xc0
[ 1079.947481]  [<ffffffff81836032>] entry_SYSCALL_64_fastpath+0x16/0x71
[ 1081.139725] usb 3-3: new high-speed USB device number 28 using xhci_hcd
[ 1086.437071] usb 3-3: new high-speed USB device number 29 using xhci_hcd
[ 1091.734274] usb 3-3: new high-speed USB device number 30 using xhci_hcd
[ 1097.031459] usb 3-3: new high-speed USB device number 31 using xhci_hcd
[ 1102.328552] usb 3-3: new high-speed USB device number 32 using xhci_hcd
[ 1107.625498] usb 3-3: new high-speed USB device number 33 using xhci_hcd
[ 1112.922360] usb 3-3: new high-speed USB device number 34 using xhci_hcd
[ 1118.219262] usb 3-3: new high-speed USB device number 35 using xhci_hcd
[ 1254.122953] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 1254.219919] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
[ 1254.424041] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 1259.628109] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1259.628264] ACPI: \_SB_.PCI0.P0P2.VGA_: failed to evaluate _DSM
[ 1259.628273] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1259.628472] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 1259.628476] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 1259.628514] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 1259.634221] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 1303.811572] usb 3-4: new high-speed USB device number 36 using xhci_hcd
[ 1304.000826] usb 3-4: Device not responding to setup address.
[ 1304.203617] usb 3-4: Device not responding to setup address.
[ 1304.407630] usb 3-4: device not accepting address 36, error -71
[ 1304.703588] usb 3-4: new high-speed USB device number 38 using xhci_hcd
[ 1304.904781] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1304.904786] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1304.904789] usb 3-4: Product: 802.11 n WLAN
[ 1304.904791] usb 3-4: Manufacturer: Ralink
[ 1304.904794] usb 3-4: SerialNumber: 1.0
[ 1305.071780] usb 3-4: reset high-speed USB device number 38 using xhci_hcd
[ 1305.266734] ieee80211 phy206: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1305.276686] ieee80211 phy206: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1305.276931] ieee80211 phy206: Selected rate control algorithm 'minstrel_ht'
[ 1306.310002] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[ 1306.333684] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1306.333751] ieee80211 phy206: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1306.333786] ieee80211 phy206: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1306.478821] usb 3-4: USB disconnect, device number 38
[ 1308.379958] usb 3-4: new high-speed USB device number 39 using xhci_hcd
[ 1308.763994] usb 3-4: new high-speed USB device number 40 using xhci_hcd
[ 1308.965734] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1308.965740] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1308.965743] usb 3-4: Product: 802.11 n WLAN
[ 1308.965745] usb 3-4: Manufacturer: Ralink
[ 1308.965747] usb 3-4: SerialNumber: 1.0
[ 1309.132276] usb 3-4: reset high-speed USB device number 40 using xhci_hcd
[ 1309.327074] ieee80211 phy207: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1309.336998] ieee80211 phy207: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1309.337250] ieee80211 phy207: Selected rate control algorithm 'minstrel_ht'
[ 1309.887478] usb 3-4: USB disconnect, device number 40
[ 1310.184113] usb 3-4: new high-speed USB device number 41 using xhci_hcd
[ 1310.385645] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1310.385648] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1310.385650] usb 3-4: Product: 802.11 n WLAN
[ 1310.385652] usb 3-4: Manufacturer: Ralink
[ 1310.385653] usb 3-4: SerialNumber: 1.0
[ 1310.552374] usb 3-4: reset high-speed USB device number 41 using xhci_hcd
[ 1310.747271] ieee80211 phy208: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1310.757263] ieee80211 phy208: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1310.757532] ieee80211 phy208: Selected rate control algorithm 'minstrel_ht'
[ 1310.838393] usb 3-4: USB disconnect, device number 41
[ 1311.144193] usb 3-4: new high-speed USB device number 42 using xhci_hcd
[ 1311.528265] usb 3-4: new high-speed USB device number 43 using xhci_hcd
[ 1311.730184] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1311.730193] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1311.730198] usb 3-4: Product: 802.11 n WLAN
[ 1311.730201] usb 3-4: Manufacturer: Ralink
[ 1311.730204] usb 3-4: SerialNumber: 1.0
[ 1311.844347] usb 3-4: reset high-speed USB device number 43 using xhci_hcd
[ 1312.039361] ieee80211 phy209: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1312.049416] ieee80211 phy209: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1312.049724] ieee80211 phy209: Selected rate control algorithm 'minstrel_ht'
[ 1312.451006] usb 3-4: USB disconnect, device number 43
[ 1312.756330] usb 3-4: new high-speed USB device number 44 using xhci_hcd
[ 1312.957799] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1312.957803] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1312.957805] usb 3-4: Product: 802.11 n WLAN
[ 1312.957806] usb 3-4: Manufacturer: Ralink
[ 1312.957807] usb 3-4: SerialNumber: 1.0
[ 1313.124560] usb 3-4: reset high-speed USB device number 44 using xhci_hcd
[ 1313.318987] ieee80211 phy210: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1313.328854] ieee80211 phy210: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1313.329113] ieee80211 phy210: Selected rate control algorithm 'minstrel_ht'
[ 1314.378871] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[ 1314.406256] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1314.406329] ieee80211 phy210: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1314.406385] ieee80211 phy210: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1314.434944] usb 3-4: USB disconnect, device number 44
[ 1315.248523] ieee80211 phy210: rt2800_wait_csr_ready: Error - Unstable hardware
[ 1315.248529] ieee80211 phy210: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)
[ 1315.540534] usb 3-4: new high-speed USB device number 45 using xhci_hcd
[ 1345.735221] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1345.735225] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1350.735903] usb 3-4: can't set config #1, error -110
[ 1350.735996] usb 3-4: USB disconnect, device number 45
[ 1350.975592] usb 3-4: new high-speed USB device number 46 using xhci_hcd
[ 1351.176787] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1351.176791] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1351.176793] usb 3-4: Product: 802.11 n WLAN
[ 1351.176794] usb 3-4: Manufacturer: Ralink
[ 1351.176795] usb 3-4: SerialNumber: 1.0
[ 1351.343784] usb 3-4: reset high-speed USB device number 46 using xhci_hcd
[ 1351.538337] ieee80211 phy211: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1351.548298] ieee80211 phy211: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1351.548611] ieee80211 phy211: Selected rate control algorithm 'minstrel_ht'
[ 1351.825130] usb 3-4: USB disconnect, device number 46
[ 1352.119683] usb 3-4: new high-speed USB device number 47 using xhci_hcd
[ 1352.321372] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1352.321375] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1352.321377] usb 3-4: Product: 802.11 n WLAN
[ 1352.321379] usb 3-4: Manufacturer: Ralink
[ 1352.321380] usb 3-4: SerialNumber: 1.0
[ 1352.487992] usb 3-4: reset high-speed USB device number 47 using xhci_hcd
[ 1357.672233] usb 3-4: device descriptor read/all, error -110
[ 1357.728293] ieee80211 phy212: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1357.728299] ieee80211 phy212: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1357.728301] ieee80211 phy212: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1357.728453] usb 3-4: USB disconnect, device number 47
[ 1357.968257] usb 3-4: new high-speed USB device number 48 using xhci_hcd
[ 1358.169691] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1358.169695] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1358.169697] usb 3-4: Product: 802.11 n WLAN
[ 1358.169699] usb 3-4: Manufacturer: Ralink
[ 1358.169700] usb 3-4: SerialNumber: 1.0
[ 1358.336381] usb 3-4: reset high-speed USB device number 48 using xhci_hcd
[ 1363.392720] ieee80211 phy213: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1363.392724] ieee80211 phy213: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1363.392726] ieee80211 phy213: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1363.392856] usb 3-4: USB disconnect, device number 48
[ 1363.632792] usb 3-4: new high-speed USB device number 49 using xhci_hcd
[ 1363.833927] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1363.833932] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1363.833935] usb 3-4: Product: 802.11 n WLAN
[ 1363.833937] usb 3-4: Manufacturer: Ralink
[ 1363.833939] usb 3-4: SerialNumber: 1.0
[ 1364.000863] usb 3-4: reset high-speed USB device number 49 using xhci_hcd
[ 1364.168786] usb 3-4: Device not responding to setup address.
[ 1364.372842] usb 3-4: Device not responding to setup address.
[ 1364.576840] usb 3-4: device not accepting address 49, error -71
[ 1364.632962] ieee80211 phy214: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1364.632974] ieee80211 phy214: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1364.632979] ieee80211 phy214: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1364.633331] usb 3-4: USB disconnect, device number 49
[ 1364.872834] usb 3-4: new high-speed USB device number 50 using xhci_hcd
[ 1365.074337] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1365.074346] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1365.074351] usb 3-4: Product: 802.11 n WLAN
[ 1365.074355] usb 3-4: Manufacturer: Ralink
[ 1365.074358] usb 3-4: SerialNumber: 1.0
[ 1365.241073] usb 3-4: reset high-speed USB device number 50 using xhci_hcd
[ 1365.435666] ieee80211 phy215: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1365.445854] ieee80211 phy215: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1365.446132] ieee80211 phy215: Selected rate control algorithm 'minstrel_ht'
[ 1365.473505] usb 3-4: USB disconnect, device number 50
[ 1365.784952] usb 3-4: new high-speed USB device number 51 using xhci_hcd
[ 1365.986135] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1365.986138] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1365.986140] usb 3-4: Product: 802.11 n WLAN
[ 1365.986142] usb 3-4: Manufacturer: Ralink
[ 1365.986143] usb 3-4: SerialNumber: 1.0
[ 1366.153212] usb 3-4: reset high-speed USB device number 51 using xhci_hcd
[ 1366.348067] ieee80211 phy216: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1366.357975] ieee80211 phy216: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1366.358233] ieee80211 phy216: Selected rate control algorithm 'minstrel_ht'
[ 1366.524251] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[ 1366.621260] nouveau 0000:01:00.0: bus: MMIO write of 00000002 FAULT at 4188ac [ IBUS ]
[ 1366.825491] nouveau 0000:01:00.0: DRM: resuming client object trees...
[ 1366.981263] usb 3-4: USB disconnect, device number 51
[ 1367.301033] usb 3-4: new high-speed USB device number 52 using xhci_hcd
[ 1367.502263] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1367.502266] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1367.502268] usb 3-4: Product: 802.11 n WLAN
[ 1367.502269] usb 3-4: Manufacturer: Ralink
[ 1367.502270] usb 3-4: SerialNumber: 1.0
[ 1367.669222] usb 3-4: reset high-speed USB device number 52 using xhci_hcd
[ 1367.863789] ieee80211 phy217: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1367.873723] ieee80211 phy217: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1367.874004] ieee80211 phy217: Selected rate control algorithm 'minstrel_ht'
[ 1368.031669] usb 3-4: USB disconnect, device number 52
[ 1368.353178] usb 3-4: new high-speed USB device number 53 using xhci_hcd
[ 1368.737213] usb 3-4: new high-speed USB device number 54 using xhci_hcd
[ 1368.938989] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1368.938996] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1368.938999] usb 3-4: Product: 802.11 n WLAN
[ 1368.939002] usb 3-4: Manufacturer: Ralink
[ 1368.939005] usb 3-4: SerialNumber: 1.0
[ 1369.105521] usb 3-4: reset high-speed USB device number 54 using xhci_hcd
[ 1371.837451] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1371.837526] ACPI: \_SB_.PCI0.P0P2.VGA_: failed to evaluate _DSM
[ 1371.837530] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 1371.837622] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 1371.837624] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[ 1371.837657] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 1371.843287] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[ 1374.161670] ieee80211 phy218: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1374.161674] ieee80211 phy218: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1374.161676] ieee80211 phy218: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1374.161815] usb 3-4: USB disconnect, device number 54
[ 1374.401689] usb 3-4: new high-speed USB device number 55 using xhci_hcd
[ 1374.603008] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1374.603011] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1374.603013] usb 3-4: Product: 802.11 n WLAN
[ 1374.603014] usb 3-4: Manufacturer: Ralink
[ 1374.603015] usb 3-4: SerialNumber: 1.0
[ 1374.769973] usb 3-4: reset high-speed USB device number 55 using xhci_hcd
[ 1374.964421] ieee80211 phy219: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1374.974880] ieee80211 phy219: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1374.975156] ieee80211 phy219: Selected rate control algorithm 'minstrel_ht'
[ 1375.248428] usb 3-4: USB disconnect, device number 55
[ 1375.545822] usb 3-4: new high-speed USB device number 56 using xhci_hcd
[ 1375.695450] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1375.695453] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1375.695455] usb 3-4: Product: 802.11 n WLAN
[ 1375.695457] usb 3-4: Manufacturer: Ralink
[ 1375.695458] usb 3-4: SerialNumber: 1.0
[ 1375.861963] usb 3-4: reset high-speed USB device number 56 using xhci_hcd
[ 1376.060428] ieee80211 phy220: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1376.070284] ieee80211 phy220: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1376.070533] ieee80211 phy220: Selected rate control algorithm 'minstrel_ht'
[ 1376.241173] usb 3-4: USB disconnect, device number 56
[ 1376.533906] usb 3-4: new high-speed USB device number 57 using xhci_hcd
[ 1376.735094] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1376.735097] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1376.735099] usb 3-4: Product: 802.11 n WLAN
[ 1376.735100] usb 3-4: Manufacturer: Ralink
[ 1376.735102] usb 3-4: SerialNumber: 1.0
[ 1376.902166] usb 3-4: reset high-speed USB device number 57 using xhci_hcd
[ 1377.096582] ieee80211 phy221: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1377.106609] ieee80211 phy221: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1377.106899] ieee80211 phy221: Selected rate control algorithm 'minstrel_ht'
[ 1377.399370] usb 3-4: USB disconnect, device number 57
[ 1377.697983] usb 3-4: new high-speed USB device number 58 using xhci_hcd
[ 1377.899355] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1377.899360] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1377.899363] usb 3-4: Product: 802.11 n WLAN
[ 1377.899365] usb 3-4: Manufacturer: Ralink
[ 1377.899368] usb 3-4: SerialNumber: 1.0
[ 1378.010065] ieee80211 phy222: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1378.010070] ieee80211 phy222: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1378.010071] ieee80211 phy222: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1378.010199] usb 3-4: USB disconnect, device number 58
[ 1378.249987] usb 3-4: new high-speed USB device number 59 using xhci_hcd
[ 1383.761268] usb 3-4: new high-speed USB device number 61 using xhci_hcd
[ 1383.963132] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1383.963140] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1383.963145] usb 3-4: Product: 802.11 n WLAN
[ 1383.963148] usb 3-4: Manufacturer: Ralink
[ 1383.963152] usb 3-4: SerialNumber: 1.0
[ 1384.077466] usb 3-4: reset high-speed USB device number 61 using xhci_hcd
[ 1384.272240] ieee80211 phy223: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1384.282188] ieee80211 phy223: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1384.282463] ieee80211 phy223: Selected rate control algorithm 'minstrel_ht'
[ 1384.948151] usb 3-4: USB disconnect, device number 61
[ 1385.244993] usb 3-4: new high-speed USB device number 62 using xhci_hcd
[ 1385.446221] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1385.446225] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1385.446228] usb 3-4: Product: 802.11 n WLAN
[ 1385.446230] usb 3-4: Manufacturer: Ralink
[ 1385.446231] usb 3-4: SerialNumber: 1.0
[ 1385.613091] usb 3-4: reset high-speed USB device number 62 using xhci_hcd
[ 1385.724979] ieee80211 phy224: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1385.724985] ieee80211 phy224: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1385.724987] ieee80211 phy224: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1385.725131] usb 3-4: USB disconnect, device number 62
[ 1385.964896] usb 3-4: new high-speed USB device number 63 using xhci_hcd
[ 1386.166557] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1386.166561] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1386.166563] usb 3-4: Product: 802.11 n WLAN
[ 1386.166564] usb 3-4: Manufacturer: Ralink
[ 1386.166566] usb 3-4: SerialNumber: 1.0
[ 1386.333127] usb 3-4: reset high-speed USB device number 63 using xhci_hcd
[ 1386.527933] ieee80211 phy225: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1386.537922] ieee80211 phy225: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1386.538192] ieee80211 phy225: Selected rate control algorithm 'minstrel_ht'
[ 1389.337404] usb 3-4: USB disconnect, device number 63
[ 1389.640461] usb 3-4: new high-speed USB device number 64 using xhci_hcd
[ 1389.841907] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1389.841911] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1389.841912] usb 3-4: Product: 802.11 n WLAN
[ 1389.841914] usb 3-4: Manufacturer: Ralink
[ 1389.841915] usb 3-4: SerialNumber: 1.0
[ 1390.008735] usb 3-4: reset high-speed USB device number 64 using xhci_hcd
[ 1390.203494] ieee80211 phy226: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1390.213482] ieee80211 phy226: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1390.213750] ieee80211 phy226: Selected rate control algorithm 'minstrel_ht'
[ 1391.036506] usb 3-4: USB disconnect, device number 64
[ 1391.344211] usb 3-4: new high-speed USB device number 65 using xhci_hcd
[ 1391.545743] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1391.545747] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1391.545749] usb 3-4: Product: 802.11 n WLAN
[ 1391.545750] usb 3-4: Manufacturer: Ralink
[ 1391.545751] usb 3-4: SerialNumber: 1.0
[ 1391.712320] usb 3-4: reset high-speed USB device number 65 using xhci_hcd
[ 1391.906763] ieee80211 phy227: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1391.916648] ieee80211 phy227: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1391.916904] ieee80211 phy227: Selected rate control algorithm 'minstrel_ht'
[ 1394.146554] usb 3-4: USB disconnect, device number 65
[ 1394.463903] usb 3-4: new high-speed USB device number 66 using xhci_hcd
[ 1394.665038] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1394.665041] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1394.665043] usb 3-4: Product: 802.11 n WLAN
[ 1394.665045] usb 3-4: Manufacturer: Ralink
[ 1394.665046] usb 3-4: SerialNumber: 1.0
[ 1394.831927] usb 3-4: reset high-speed USB device number 66 using xhci_hcd
[ 1394.943835] ieee80211 phy228: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1394.943840] ieee80211 phy228: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1394.943843] ieee80211 phy228: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1394.943973] usb 3-4: USB disconnect, device number 66
[ 1395.183826] usb 3-4: new high-speed USB device number 67 using xhci_hcd
[ 1395.385594] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1395.385601] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1395.385605] usb 3-4: Product: 802.11 n WLAN
[ 1395.385608] usb 3-4: Manufacturer: Ralink
[ 1395.385611] usb 3-4: SerialNumber: 1.0
[ 1395.495849] ieee80211 phy229: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1395.495857] ieee80211 phy229: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1395.495861] ieee80211 phy229: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1395.496019] usb 3-4: USB disconnect, device number 67
[ 1395.735751] usb 3-4: new high-speed USB device number 68 using xhci_hcd
[ 1395.936940] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1395.936944] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1395.936945] usb 3-4: Product: 802.11 n WLAN
[ 1395.936947] usb 3-4: Manufacturer: Ralink
[ 1395.936948] usb 3-4: SerialNumber: 1.0
[ 1396.103822] usb 3-4: reset high-speed USB device number 68 using xhci_hcd
[ 1401.159133] ieee80211 phy230: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1401.159138] ieee80211 phy230: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1401.159139] ieee80211 phy230: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1401.159266] usb 3-4: USB disconnect, device number 68
[ 1401.779031] usb 3-4: new high-speed USB device number 69 using xhci_hcd
[ 1401.980978] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1401.980987] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1401.980991] usb 3-4: Product: 802.11 n WLAN
[ 1401.980995] usb 3-4: Manufacturer: Ralink
[ 1401.980998] usb 3-4: SerialNumber: 1.0
[ 1402.095153] usb 3-4: reset high-speed USB device number 69 using xhci_hcd
[ 1402.207023] ieee80211 phy231: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1402.207029] ieee80211 phy231: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1402.207031] ieee80211 phy231: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1402.207171] usb 3-4: USB disconnect, device number 69
[ 1402.446968] usb 3-4: new high-speed USB device number 70 using xhci_hcd
[ 1402.648158] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1402.648161] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1402.648163] usb 3-4: Product: 802.11 n WLAN
[ 1402.648165] usb 3-4: Manufacturer: Ralink
[ 1402.648166] usb 3-4: SerialNumber: 1.0
[ 1402.815189] usb 3-4: reset high-speed USB device number 70 using xhci_hcd
[ 1403.010124] ieee80211 phy232: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1403.020943] ieee80211 phy232: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1403.021275] ieee80211 phy232: Selected rate control algorithm 'minstrel_ht'
[ 1405.062126] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[ 1405.092857] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1405.092965] ieee80211 phy232: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1405.093017] ieee80211 phy232: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1405.281562] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1405.333702] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1406.771528] usb 3-4: USB disconnect, device number 70
[ 1407.090551] usb 3-4: new high-speed USB device number 71 using xhci_hcd
[ 1412.386025] usb 3-4: new high-speed USB device number 72 using xhci_hcd
[ 1412.587615] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1412.587619] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1412.587621] usb 3-4: Product: 802.11 n WLAN
[ 1412.587622] usb 3-4: Manufacturer: Ralink
[ 1412.587623] usb 3-4: SerialNumber: 1.0
[ 1412.754220] usb 3-4: reset high-speed USB device number 72 using xhci_hcd
[ 1412.948954] ieee80211 phy233: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1413.049996] ieee80211 phy233: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1415.049815] ieee80211 phy233: rt2x00usb_vendor_request: Error - Vendor Request 0x09 failed for offset 0x0000 with error -110
[ 1415.049821] ieee80211 phy233: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1415.049837] rt2800usb: probe of 3-4:1.0 failed with error -110
[ 1415.049979] usb 3-4: USB disconnect, device number 72
[ 1415.289753] usb 3-4: new high-speed USB device number 73 using xhci_hcd
[ 1420.473412] usb 3-4: unable to read config index 0 descriptor/all
[ 1420.473422] usb 3-4: can't read configurations, error -110
[ 1420.769305] usb 3-4: new high-speed USB device number 75 using xhci_hcd
[ 1428.804676] usb 3-3: new high-speed USB device number 76 using xhci_hcd
[ 1429.006552] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1429.006560] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1429.006565] usb 3-3: Product: 802.11 n WLAN
[ 1429.006568] usb 3-3: Manufacturer: Ralink
[ 1429.006572] usb 3-3: SerialNumber: 1.0
[ 1429.172842] usb 3-3: reset high-speed USB device number 76 using xhci_hcd
[ 1429.367686] ieee80211 phy234: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1429.377660] ieee80211 phy234: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1429.377909] ieee80211 phy234: Selected rate control algorithm 'minstrel_ht'
[ 1429.923039] usb 3-3: USB disconnect, device number 76
[ 1430.208584] usb 3-3: new high-speed USB device number 77 using xhci_hcd
[ 1430.410136] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1430.410140] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1430.410141] usb 3-3: Product: 802.11 n WLAN
[ 1430.410143] usb 3-3: Manufacturer: Ralink
[ 1430.410144] usb 3-3: SerialNumber: 1.0
[ 1430.576774] usb 3-3: reset high-speed USB device number 77 using xhci_hcd
[ 1430.771546] ieee80211 phy235: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1430.781491] ieee80211 phy235: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1430.781733] ieee80211 phy235: Selected rate control algorithm 'minstrel_ht'
[ 1431.243555] usb 3-3: USB disconnect, device number 77
[ 1431.536518] usb 3-3: new high-speed USB device number 78 using xhci_hcd
[ 1431.737745] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1431.737748] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1431.737750] usb 3-3: Product: 802.11 n WLAN
[ 1431.737751] usb 3-3: Manufacturer: Ralink
[ 1431.737753] usb 3-3: SerialNumber: 1.0
[ 1431.904686] usb 3-3: reset high-speed USB device number 78 using xhci_hcd
[ 1432.099270] ieee80211 phy236: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1432.109286] ieee80211 phy236: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1432.109539] ieee80211 phy236: Selected rate control algorithm 'minstrel_ht'
[ 1433.150430] rt2800usb 3-3:1.0 wlx000c0b470f52: renamed from wlan0
[ 1433.169344] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1433.169392] ieee80211 phy236: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1433.169421] ieee80211 phy236: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1433.347405] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1433.373928] usb 3-3: USB disconnect, device number 78
[ 1433.388216] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1433.692276] usb 3-3: new high-speed USB device number 79 using xhci_hcd
[ 1433.893910] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1433.893913] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1433.893915] usb 3-3: Product: 802.11 n WLAN
[ 1433.893917] usb 3-3: Manufacturer: Ralink
[ 1433.893918] usb 3-3: SerialNumber: 1.0
[ 1434.060533] usb 3-3: reset high-speed USB device number 79 using xhci_hcd
[ 1434.255337] ieee80211 phy237: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1434.265354] ieee80211 phy237: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1434.265605] ieee80211 phy237: Selected rate control algorithm 'minstrel_ht'
[ 1435.176086] usb 3-3: USB disconnect, device number 79
[ 1436.876097] usb 3-4: new high-speed USB device number 80 using xhci_hcd
[ 1437.077700] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1437.077704] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1437.077705] usb 3-4: Product: 802.11 n WLAN
[ 1437.077707] usb 3-4: Manufacturer: Ralink
[ 1437.077708] usb 3-4: SerialNumber: 1.0
[ 1437.244272] usb 3-4: reset high-speed USB device number 80 using xhci_hcd
[ 1437.439109] ieee80211 phy238: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1437.449111] ieee80211 phy238: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1437.449382] ieee80211 phy238: Selected rate control algorithm 'minstrel_ht'
[ 1438.180581] usb 3-4: USB disconnect, device number 80
[ 1438.474339] usb 3-4: new high-speed USB device number 81 using xhci_hcd
[ 1443.767739] usb 3-4: new high-speed USB device number 82 using xhci_hcd
[ 1443.969557] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1443.969566] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1443.969571] usb 3-4: Product: 802.11 n WLAN
[ 1443.969575] usb 3-4: Manufacturer: Ralink
[ 1443.969578] usb 3-4: SerialNumber: 1.0
[ 1444.083938] usb 3-4: reset high-speed USB device number 82 using xhci_hcd
[ 1444.278547] ieee80211 phy239: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1444.288499] ieee80211 phy239: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1444.288771] ieee80211 phy239: Selected rate control algorithm 'minstrel_ht'
[ 1445.307376] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[ 1445.337163] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1445.337279] ieee80211 phy239: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1445.337333] ieee80211 phy239: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1445.510258] usb 3-4: USB disconnect, device number 82
[ 1445.523673] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1445.815546] usb 3-4: new high-speed USB device number 83 using xhci_hcd
[ 1446.017261] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1446.017265] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1446.017267] usb 3-4: Product: 802.11 n WLAN
[ 1446.017268] usb 3-4: Manufacturer: Ralink
[ 1446.017269] usb 3-4: SerialNumber: 1.0
[ 1446.183788] usb 3-4: reset high-speed USB device number 83 using xhci_hcd
[ 1446.351625] usb 3-4: Device not responding to setup address.
[ 1446.555555] usb 3-4: Device not responding to setup address.
[ 1446.759577] usb 3-4: device not accepting address 83, error -71
[ 1446.815570] ieee80211 phy240: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1446.815579] ieee80211 phy240: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1446.815584] ieee80211 phy240: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1446.815786] usb 3-4: USB disconnect, device number 83
[ 1447.055515] usb 3-4: new high-speed USB device number 84 using xhci_hcd
[ 1452.351236] usb 3-4: new high-speed USB device number 85 using xhci_hcd
[ 1452.767213] usb 3-4: new high-speed USB device number 86 using xhci_hcd
[ 1452.968561] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1452.968564] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1452.968566] usb 3-4: Product: 802.11 n WLAN
[ 1452.968568] usb 3-4: Manufacturer: Ralink
[ 1452.968569] usb 3-4: SerialNumber: 1.0
[ 1453.135403] usb 3-4: reset high-speed USB device number 86 using xhci_hcd
[ 1453.330224] ieee80211 phy241: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1453.340171] ieee80211 phy241: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1453.340420] ieee80211 phy241: Selected rate control algorithm 'minstrel_ht'
[ 1454.359771] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[ 1454.385248] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1454.385313] ieee80211 phy241: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1454.385346] ieee80211 phy241: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1454.561950] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1454.598867] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1455.771070] usb 3-4: USB disconnect, device number 86
[ 1456.083055] usb 3-4: new high-speed USB device number 87 using xhci_hcd
[ 1456.284630] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1456.284633] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1456.284635] usb 3-4: Product: 802.11 n WLAN
[ 1456.284637] usb 3-4: Manufacturer: Ralink
[ 1456.284638] usb 3-4: SerialNumber: 1.0
[ 1456.451321] usb 3-4: reset high-speed USB device number 87 using xhci_hcd
[ 1456.645952] ieee80211 phy242: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1456.656221] ieee80211 phy242: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1456.656538] ieee80211 phy242: Selected rate control algorithm 'minstrel_ht'
[ 1457.121923] usb 3-4: USB disconnect, device number 87
[ 1457.410948] usb 3-4: new high-speed USB device number 88 using xhci_hcd
[ 1457.612347] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1457.612352] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1457.612355] usb 3-4: Product: 802.11 n WLAN
[ 1457.612357] usb 3-4: Manufacturer: Ralink
[ 1457.612359] usb 3-4: SerialNumber: 1.0
[ 1457.779167] usb 3-4: reset high-speed USB device number 88 using xhci_hcd
[ 1457.973988] ieee80211 phy243: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1457.983886] ieee80211 phy243: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1457.984132] ieee80211 phy243: Selected rate control algorithm 'minstrel_ht'
[ 1458.471714] usb 3-4: USB disconnect, device number 88
[ 1458.766892] usb 3-4: new high-speed USB device number 89 using xhci_hcd
[ 1458.968546] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1458.968550] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1458.968551] usb 3-4: Product: 802.11 n WLAN
[ 1458.968553] usb 3-4: Manufacturer: Ralink
[ 1458.968554] usb 3-4: SerialNumber: 1.0
[ 1459.135113] usb 3-4: reset high-speed USB device number 89 using xhci_hcd
[ 1459.329768] ieee80211 phy244: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1459.339739] ieee80211 phy244: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1459.339995] ieee80211 phy244: Selected rate control algorithm 'minstrel_ht'
[ 1460.380215] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[ 1460.405240] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1460.405291] ieee80211 phy244: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1460.405317] ieee80211 phy244: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1460.581783] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1460.618715] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1466.403277] usb 3-4: USB disconnect, device number 89
[ 1466.718605] usb 3-4: new high-speed USB device number 90 using xhci_hcd
[ 1466.920074] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1466.920078] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1466.920079] usb 3-4: Product: 802.11 n WLAN
[ 1466.920081] usb 3-4: Manufacturer: Ralink
[ 1466.920082] usb 3-4: SerialNumber: 1.0
[ 1467.086732] usb 3-4: reset high-speed USB device number 90 using xhci_hcd
[ 1467.281482] ieee80211 phy245: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1467.291472] ieee80211 phy245: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1467.291719] ieee80211 phy245: Selected rate control algorithm 'minstrel_ht'
[ 1467.723284] usb 3-4: USB disconnect, device number 90
[ 1468.026508] usb 3-4: new high-speed USB device number 91 using xhci_hcd
[ 1468.228106] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1468.228110] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1468.228111] usb 3-4: Product: 802.11 n WLAN
[ 1468.228113] usb 3-4: Manufacturer: Ralink
[ 1468.228114] usb 3-4: SerialNumber: 1.0
[ 1468.394754] usb 3-4: reset high-speed USB device number 91 using xhci_hcd
[ 1473.450426] ieee80211 phy246: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1473.450430] ieee80211 phy246: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1473.450432] ieee80211 phy246: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1473.450573] usb 3-4: USB disconnect, device number 91
[ 1473.690365] usb 3-4: new high-speed USB device number 92 using xhci_hcd
[ 1473.891785] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1473.891790] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1473.891792] usb 3-4: Product: 802.11 n WLAN
[ 1473.891794] usb 3-4: Manufacturer: Ralink
[ 1473.891796] usb 3-4: SerialNumber: 1.0
[ 1474.058588] usb 3-4: reset high-speed USB device number 92 using xhci_hcd
[ 1474.253408] ieee80211 phy247: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1474.263379] ieee80211 phy247: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1474.263646] ieee80211 phy247: Selected rate control algorithm 'minstrel_ht'
[ 1476.308309] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[ 1476.327296] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1476.327345] ieee80211 phy247: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1476.327373] ieee80211 phy247: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1476.505141] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1476.546398] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1477.017824] usb 3-4: USB disconnect, device number 92
[ 1477.318256] usb 3-4: new high-speed USB device number 93 using xhci_hcd
[ 1477.486330] usb 3-4: Device not responding to setup address.
[ 1477.690223] usb 3-4: Device not responding to setup address.
[ 1477.894247] usb 3-4: device not accepting address 93, error -71
[ 1478.190267] usb 3-4: new high-speed USB device number 95 using xhci_hcd
[ 1478.391877] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1478.391881] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1478.391883] usb 3-4: Product: 802.11 n WLAN
[ 1478.391885] usb 3-4: Manufacturer: Ralink
[ 1478.391886] usb 3-4: SerialNumber: 1.0
[ 1478.506384] usb 3-4: reset high-speed USB device number 95 using xhci_hcd
[ 1478.701338] ieee80211 phy248: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1478.711644] ieee80211 phy248: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1478.711941] ieee80211 phy248: Selected rate control algorithm 'minstrel_ht'
[ 1478.909829] usb 3-4: USB disconnect, device number 95
[ 1479.206219] usb 3-4: new high-speed USB device number 96 using xhci_hcd
[ 1479.407539] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1479.407544] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1479.407547] usb 3-4: Product: 802.11 n WLAN
[ 1479.407549] usb 3-4: Manufacturer: Ralink
[ 1479.407551] usb 3-4: SerialNumber: 1.0
[ 1479.574269] usb 3-4: reset high-speed USB device number 96 using xhci_hcd
[ 1479.690180] usb 3-4: Device not responding to setup address.
[ 1479.894149] usb 3-4: Device not responding to setup address.
[ 1480.098138] usb 3-4: device not accepting address 96, error -71
[ 1480.154218] ieee80211 phy249: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1480.154223] ieee80211 phy249: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1480.154224] ieee80211 phy249: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1480.154363] usb 3-4: USB disconnect, device number 96
[ 1480.394123] usb 3-4: new high-speed USB device number 97 using xhci_hcd
[ 1480.790107] usb 3-4: new high-speed USB device number 98 using xhci_hcd
[ 1480.958231] usb 3-4: Device not responding to setup address.
[ 1481.162163] usb 3-4: Device not responding to setup address.
[ 1481.366123] usb 3-4: device not accepting address 98, error -71
[ 1481.662066] usb 3-4: new high-speed USB device number 100 using xhci_hcd
[ 1481.863745] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1481.863749] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1481.863751] usb 3-4: Product: 802.11 n WLAN
[ 1481.863752] usb 3-4: Manufacturer: Ralink
[ 1481.863753] usb 3-4: SerialNumber: 1.0
[ 1482.030199] usb 3-4: reset high-speed USB device number 100 using xhci_hcd
[ 1487.086054] ieee80211 phy250: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1487.086058] ieee80211 phy250: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1487.086060] ieee80211 phy250: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1487.086200] usb 3-4: USB disconnect, device number 100
[ 1487.326004] usb 3-4: new high-speed USB device number 101 using xhci_hcd
[ 1487.733917] usb 3-4: new high-speed USB device number 102 using xhci_hcd
[ 1487.902038] usb 3-4: Device not responding to setup address.
[ 1488.105979] usb 3-4: Device not responding to setup address.
[ 1488.309939] usb 3-4: device not accepting address 102, error -71
[ 1488.605914] usb 3-4: new high-speed USB device number 104 using xhci_hcd
[ 1488.807255] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1488.807259] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1488.807261] usb 3-4: Product: 802.11 n WLAN
[ 1488.807262] usb 3-4: Manufacturer: Ralink
[ 1488.807263] usb 3-4: SerialNumber: 1.0
[ 1488.974188] usb 3-4: reset high-speed USB device number 104 using xhci_hcd
[ 1489.168642] ieee80211 phy251: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1489.178527] ieee80211 phy251: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1489.178801] ieee80211 phy251: Selected rate control algorithm 'minstrel_ht'
[ 1489.379733] usb 3-4: USB disconnect, device number 104
[ 1489.681884] usb 3-4: new high-speed USB device number 105 using xhci_hcd
[ 1489.883232] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1489.883235] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1489.883237] usb 3-4: Product: 802.11 n WLAN
[ 1489.883238] usb 3-4: Manufacturer: Ralink
[ 1489.883239] usb 3-4: SerialNumber: 1.0
[ 1490.050017] usb 3-4: reset high-speed USB device number 105 using xhci_hcd
[ 1490.244525] ieee80211 phy252: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1490.254483] ieee80211 phy252: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1490.254756] ieee80211 phy252: Selected rate control algorithm 'minstrel_ht'
[ 1490.437839] usb 3-4: USB disconnect, device number 105
[ 1490.753867] usb 3-4: new high-speed USB device number 106 using xhci_hcd
[ 1490.955094] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1490.955097] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1490.955099] usb 3-4: Product: 802.11 n WLAN
[ 1490.955101] usb 3-4: Manufacturer: Ralink
[ 1490.955102] usb 3-4: SerialNumber: 1.0
[ 1491.122141] usb 3-4: reset high-speed USB device number 106 using xhci_hcd
[ 1491.316883] ieee80211 phy253: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1491.326833] ieee80211 phy253: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1491.327080] ieee80211 phy253: Selected rate control algorithm 'minstrel_ht'
[ 1491.796972] usb 3-4: USB disconnect, device number 106
[ 1492.093868] usb 3-4: new high-speed USB device number 107 using xhci_hcd
[ 1492.477824] usb 3-4: new high-speed USB device number 108 using xhci_hcd
[ 1492.829919] usb 3-4: new high-speed USB device number 109 using xhci_hcd
[ 1493.031248] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1493.031252] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1493.031254] usb 3-4: Product: 802.11 n WLAN
[ 1493.031255] usb 3-4: Manufacturer: Ralink
[ 1493.031256] usb 3-4: SerialNumber: 1.0
[ 1493.198187] usb 3-4: reset high-speed USB device number 109 using xhci_hcd
[ 1493.392543] ieee80211 phy254: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1493.402430] ieee80211 phy254: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1493.402702] ieee80211 phy254: Selected rate control algorithm 'minstrel_ht'
[ 1493.575773] usb 3-4: USB disconnect, device number 109
[ 1493.873815] usb 3-4: new high-speed USB device number 110 using xhci_hcd
[ 1494.075510] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1494.075513] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1494.075515] usb 3-4: Product: 802.11 n WLAN
[ 1494.075517] usb 3-4: Manufacturer: Ralink
[ 1494.075518] usb 3-4: SerialNumber: 1.0
[ 1494.242088] usb 3-4: reset high-speed USB device number 110 using xhci_hcd
[ 1494.436815] ieee80211 phy255: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1494.446784] ieee80211 phy255: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1494.447056] ieee80211 phy255: Selected rate control algorithm 'minstrel_ht'
[ 1495.485175] rt2800usb 3-4:1.0 wlx000c0b470f52: renamed from wlan0
[ 1495.513896] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1495.513999] ieee80211 phy255: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1495.514050] ieee80211 phy255: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 1495.700672] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1495.742656] IPv6: ADDRCONF(NETDEV_UP): wlx000c0b470f52: link is not ready
[ 1496.363921] usb 3-4: USB disconnect, device number 110
[ 1496.681760] usb 3-4: new high-speed USB device number 111 using xhci_hcd
[ 1497.033752] usb 3-4: new high-speed USB device number 112 using xhci_hcd
[ 1497.235427] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1497.235430] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1497.235432] usb 3-4: Product: 802.11 n WLAN
[ 1497.235434] usb 3-4: Manufacturer: Ralink
[ 1497.235435] usb 3-4: SerialNumber: 1.0
[ 1497.402046] usb 3-4: reset high-speed USB device number 112 using xhci_hcd
[ 1502.457748] ieee80211 phy256: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1502.457753] ieee80211 phy256: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1502.457755] ieee80211 phy256: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1502.457886] usb 3-4: USB disconnect, device number 112
[ 1502.697703] usb 3-4: new high-speed USB device number 113 using xhci_hcd
[ 1502.899279] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1502.899282] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1502.899284] usb 3-4: Product: 802.11 n WLAN
[ 1502.899286] usb 3-4: Manufacturer: Ralink
[ 1502.899287] usb 3-4: SerialNumber: 1.0
[ 1503.013842] ieee80211 phy257: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1503.013857] ieee80211 phy257: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1503.013862] ieee80211 phy257: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1503.014209] usb 3-4: USB disconnect, device number 113
[ 1503.253685] usb 3-4: new high-speed USB device number 114 using xhci_hcd
[ 1503.455350] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1503.455354] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1503.455356] usb 3-4: Product: 802.11 n WLAN
[ 1503.455357] usb 3-4: Manufacturer: Ralink
[ 1503.455359] usb 3-4: SerialNumber: 1.0
[ 1503.621961] usb 3-4: reset high-speed USB device number 114 using xhci_hcd
[ 1503.816962] ieee80211 phy258: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1503.827505] ieee80211 phy258: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1503.827808] ieee80211 phy258: Selected rate control algorithm 'minstrel_ht'
[ 1504.093754] usb 3-4: USB disconnect, device number 114
[ 1504.405679] usb 3-4: new high-speed USB device number 115 using xhci_hcd
[ 1504.607291] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1504.607295] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1504.607296] usb 3-4: Product: 802.11 n WLAN
[ 1504.607298] usb 3-4: Manufacturer: Ralink
[ 1504.607299] usb 3-4: SerialNumber: 1.0
[ 1504.773939] usb 3-4: reset high-speed USB device number 115 using xhci_hcd
[ 1504.968765] ieee80211 phy259: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1504.978774] ieee80211 phy259: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1504.979027] ieee80211 phy259: Selected rate control algorithm 'minstrel_ht'
[ 1505.016768] usb 3-4: USB disconnect, device number 115
[ 1505.313709] usb 3-4: new high-speed USB device number 116 using xhci_hcd
[ 1505.515325] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1505.515328] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1505.515330] usb 3-4: Product: 802.11 n WLAN
[ 1505.515332] usb 3-4: Manufacturer: Ralink
[ 1505.515333] usb 3-4: SerialNumber: 1.0
[ 1505.682001] usb 3-4: reset high-speed USB device number 116 using xhci_hcd
[ 1505.876975] ieee80211 phy260: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1505.889016] ieee80211 phy260: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1505.889697] ieee80211 phy260: Selected rate control algorithm 'minstrel_ht'
[ 1505.897041] usb 3-4: USB disconnect, device number 116
[ 1506.205669] usb 3-4: new high-speed USB device number 117 using xhci_hcd
[ 1506.407258] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1506.407262] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1506.407263] usb 3-4: Product: 802.11 n WLAN
[ 1506.407265] usb 3-4: Manufacturer: Ralink
[ 1506.407266] usb 3-4: SerialNumber: 1.0
[ 1506.573919] usb 3-4: reset high-speed USB device number 117 using xhci_hcd
[ 1511.629813] ieee80211 phy261: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1511.629822] ieee80211 phy261: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1511.629825] ieee80211 phy261: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1511.630077] usb 3-4: USB disconnect, device number 117
[ 1511.869654] usb 3-4: new high-speed USB device number 118 using xhci_hcd
[ 1512.018739] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1512.018743] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1512.018745] usb 3-4: Product: 802.11 n WLAN
[ 1512.018746] usb 3-4: Manufacturer: Ralink
[ 1512.018747] usb 3-4: SerialNumber: 1.0
[ 1512.185744] usb 3-4: reset high-speed USB device number 118 using xhci_hcd
[ 1512.380592] ieee80211 phy262: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1512.390574] ieee80211 phy262: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1512.390843] ieee80211 phy262: Selected rate control algorithm 'minstrel_ht'
[ 1512.569063] usb 3-4: USB disconnect, device number 118
[ 1512.877589] usb 3-4: new high-speed USB device number 119 using xhci_hcd
[ 1513.078821] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1513.078824] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1513.078826] usb 3-4: Product: 802.11 n WLAN
[ 1513.078827] usb 3-4: Manufacturer: Ralink
[ 1513.078829] usb 3-4: SerialNumber: 1.0
[ 1513.245747] usb 3-4: reset high-speed USB device number 119 using xhci_hcd
[ 1518.301642] ieee80211 phy263: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1518.301646] ieee80211 phy263: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1518.301647] ieee80211 phy263: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1518.301790] usb 3-4: USB disconnect, device number 119
[ 1518.541578] usb 3-4: new high-speed USB device number 120 using xhci_hcd
[ 1523.725612] usb 3-4: unable to read config index 0 descriptor/all
[ 1523.725616] usb 3-4: can't read configurations, error -110
[ 1524.021661] usb 3-4: new high-speed USB device number 122 using xhci_hcd
[ 1524.223190] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1524.223194] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1524.223196] usb 3-4: Product: 802.11 n WLAN
[ 1524.223197] usb 3-4: Manufacturer: Ralink
[ 1524.223199] usb 3-4: SerialNumber: 1.0
[ 1524.389847] usb 3-4: reset high-speed USB device number 122 using xhci_hcd
[ 1529.445604] ieee80211 phy264: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1529.445610] ieee80211 phy264: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1529.445613] ieee80211 phy264: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1529.445745] usb 3-4: USB disconnect, device number 122
[ 1529.685575] usb 3-4: new high-speed USB device number 123 using xhci_hcd
[ 1534.981578] usb 3-4: new high-speed USB device number 124 using xhci_hcd
[ 1535.182858] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1535.182863] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1535.182866] usb 3-4: Product: 802.11 n WLAN
[ 1535.182868] usb 3-4: Manufacturer: Ralink
[ 1535.182870] usb 3-4: SerialNumber: 1.0
[ 1535.349724] usb 3-4: reset high-speed USB device number 124 using xhci_hcd
[ 1540.405826] ieee80211 phy265: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1540.405837] ieee80211 phy265: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1540.405844] ieee80211 phy265: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1540.406172] usb 3-4: USB disconnect, device number 124
[ 1540.645713] usb 3-4: new high-speed USB device number 125 using xhci_hcd
[ 1540.847325] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1540.847329] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1540.847330] usb 3-4: Product: 802.11 n WLAN
[ 1540.847332] usb 3-4: Manufacturer: Ralink
[ 1540.847333] usb 3-4: SerialNumber: 1.0
[ 1541.013827] usb 3-4: reset high-speed USB device number 125 using xhci_hcd
[ 1541.208788] ieee80211 phy266: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1541.219198] ieee80211 phy266: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1541.219608] ieee80211 phy266: Selected rate control algorithm 'minstrel_ht'
[ 1541.819150] usb 3-4: USB disconnect, device number 125
[ 1542.137698] usb 3-4: new high-speed USB device number 126 using xhci_hcd
[ 1542.305749] usb 3-4: Device not responding to setup address.
[ 1542.509755] usb 3-4: Device not responding to setup address.
[ 1542.713742] usb 3-4: device not accepting address 126, error -71
[ 1543.009708] usb 3-4: new high-speed USB device number 4 using xhci_hcd
[ 1543.211161] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1543.211166] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1543.211168] usb 3-4: Product: 802.11 n WLAN
[ 1543.211170] usb 3-4: Manufacturer: Ralink
[ 1543.211172] usb 3-4: SerialNumber: 1.0
[ 1543.377917] usb 3-4: reset high-speed USB device number 4 using xhci_hcd
[ 1543.572804] ieee80211 phy267: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1543.582899] ieee80211 phy267: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1543.583181] ieee80211 phy267: Selected rate control algorithm 'minstrel_ht'
[ 1544.020737] usb 3-4: USB disconnect, device number 4
[ 1544.313656] usb 3-4: new high-speed USB device number 5 using xhci_hcd
[ 1544.515244] usb 3-4: New USB device found, idVendor=148f, idProduct=3072
[ 1544.515248] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1544.515250] usb 3-4: Product: 802.11 n WLAN
[ 1544.515251] usb 3-4: Manufacturer: Ralink
[ 1544.515253] usb 3-4: SerialNumber: 1.0
[ 1544.708674] usb 3-4: reset high-speed USB device number 5 using xhci_hcd
[ 1544.904787] ieee80211 phy268: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1545.013742] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1545.117810] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1545.221734] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1545.325762] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1545.429738] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1545.533748] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1545.637713] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1545.741688] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1545.845757] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1545.949759] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1546.053771] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1546.157808] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1546.261762] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1546.365763] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1546.477685] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1546.584092] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1546.685786] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1546.789767] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1546.893830] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1546.997812] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1547.101794] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1547.205773] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1547.309773] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1547.413719] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1547.517772] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1547.621782] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1547.725722] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1547.829731] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1547.933727] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1548.037748] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1548.141733] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1548.245724] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1548.349783] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1548.453776] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1548.557728] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1548.661740] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1548.765790] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1548.869723] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1548.973740] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1549.077796] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1549.181798] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1549.286562] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1549.389743] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1549.493753] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1549.597745] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1549.701735] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1549.805793] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1549.909750] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1550.013751] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1550.117759] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1550.221760] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1550.325759] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1550.429772] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1550.533761] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1550.637745] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1550.741758] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1550.845762] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1550.949763] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1551.053765] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1551.157760] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1551.261771] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1551.365815] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1551.469769] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1551.573819] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1551.677819] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1551.781823] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1551.885775] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1551.989777] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1552.093778] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1552.197776] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0580 with error -110
[ 1552.301784] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0580 with error -110
[ 1552.405782] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x059c with error -110
[ 1552.509785] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0598 with error -110
[ 1552.613785] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0594 with error -110
[ 1552.717795] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0590 with error -110
[ 1552.717801] ieee80211 phy268: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1552.821783] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0228 with error -110
[ 1552.925785] ieee80211 phy268: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0228 with error -110
[ 1552.925971] ieee80211 phy268: Selected rate control algorithm 'minstrel_ht'
[ 1553.165775] usb 3-3: new high-speed USB device number 8 using xhci_hcd
[ 1558.221954] usb 3-4: USB disconnect, device number 5
[ 1558.649955] usb 3-3: new high-speed USB device number 9 using xhci_hcd
[ 1558.851500] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1558.851504] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1558.851506] usb 3-3: Product: 802.11 n WLAN
[ 1558.851507] usb 3-3: Manufacturer: Ralink
[ 1558.851509] usb 3-3: SerialNumber: 1.0
[ 1559.018137] usb 3-3: reset high-speed USB device number 9 using xhci_hcd
[ 1559.212942] ieee80211 phy269: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1559.222878] ieee80211 phy269: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1559.223119] ieee80211 phy269: Selected rate control algorithm 'minstrel_ht'
[ 1559.472160] usb 3-3: USB disconnect, device number 9
[ 1559.765956] usb 3-3: new high-speed USB device number 10 using xhci_hcd
[ 1559.967536] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1559.967540] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1559.967542] usb 3-3: Product: 802.11 n WLAN
[ 1559.967543] usb 3-3: Manufacturer: Ralink
[ 1559.967544] usb 3-3: SerialNumber: 1.0
[ 1560.138069] usb 3-3: reset high-speed USB device number 10 using xhci_hcd
[ 1560.305946] usb 3-3: Device not responding to setup address.
[ 1560.509894] usb 3-3: Device not responding to setup address.
[ 1560.713885] usb 3-3: device not accepting address 10, error -71
[ 1560.769934] ieee80211 phy270: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1560.769940] ieee80211 phy270: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1560.769943] ieee80211 phy270: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1560.770635] usb 3-3: USB disconnect, device number 10
[ 1561.009894] usb 3-3: new high-speed USB device number 11 using xhci_hcd
[ 1561.177957] usb 3-3: Device not responding to setup address.
[ 1561.381910] usb 3-3: Device not responding to setup address.
[ 1561.585903] usb 3-3: device not accepting address 11, error -71
[ 1561.881903] usb 3-3: new high-speed USB device number 13 using xhci_hcd
[ 1562.083131] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1562.083135] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1562.083137] usb 3-3: Product: 802.11 n WLAN
[ 1562.083138] usb 3-3: Manufacturer: Ralink
[ 1562.083139] usb 3-3: SerialNumber: 1.0
[ 1562.250074] usb 3-3: reset high-speed USB device number 13 using xhci_hcd
[ 1562.444640] ieee80211 phy271: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1562.454633] ieee80211 phy271: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1562.454918] ieee80211 phy271: Selected rate control algorithm 'minstrel_ht'
[ 1563.101543] usb 3-3: USB disconnect, device number 13
[ 1563.413935] usb 3-3: new high-speed USB device number 14 using xhci_hcd
[ 1563.615199] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1563.615203] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1563.615205] usb 3-3: Product: 802.11 n WLAN
[ 1563.615206] usb 3-3: Manufacturer: Ralink
[ 1563.615207] usb 3-3: SerialNumber: 1.0
[ 1563.782099] usb 3-3: reset high-speed USB device number 14 using xhci_hcd
[ 1563.976649] ieee80211 phy272: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1563.986640] ieee80211 phy272: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1563.986933] ieee80211 phy272: Selected rate control algorithm 'minstrel_ht'
[ 1564.234071] usb 3-3: USB disconnect, device number 14
[ 1564.534003] usb 3-3: new high-speed USB device number 15 using xhci_hcd
[ 1564.702087] usb 3-3: Device not responding to setup address.
[ 1564.906037] usb 3-3: Device not responding to setup address.
[ 1565.109984] usb 3-3: device not accepting address 15, error -71
[ 1565.406047] usb 3-3: new high-speed USB device number 17 using xhci_hcd
[ 1565.607985] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1565.607994] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1565.607998] usb 3-3: Product: 802.11 n WLAN
[ 1565.608002] usb 3-3: Manufacturer: Ralink
[ 1565.608005] usb 3-3: SerialNumber: 1.0
[ 1565.722202] usb 3-3: reset high-speed USB device number 17 using xhci_hcd
[ 1565.917091] ieee80211 phy273: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1565.927052] ieee80211 phy273: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1565.927298] ieee80211 phy273: Selected rate control algorithm 'minstrel_ht'
[ 1566.042345] usb 3-3: USB disconnect, device number 17
[ 1566.338035] usb 3-3: new high-speed USB device number 18 using xhci_hcd
[ 1571.634064] usb 3-3: new high-speed USB device number 19 using xhci_hcd
[ 1571.835812] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1571.835819] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1571.835823] usb 3-3: Product: 802.11 n WLAN
[ 1571.835826] usb 3-3: Manufacturer: Ralink
[ 1571.835829] usb 3-3: SerialNumber: 1.0
[ 1572.006233] usb 3-3: reset high-speed USB device number 19 using xhci_hcd
[ 1572.201073] ieee80211 phy274: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1572.211098] ieee80211 phy274: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1572.211388] ieee80211 phy274: Selected rate control algorithm 'minstrel_ht'
[ 1573.882419] usb 3-3: USB disconnect, device number 19
[ 1574.190149] usb 3-3: new high-speed USB device number 20 using xhci_hcd
[ 1574.395300] usb 3-3: New USB device found, idVendor=148f, idProduct=3072
[ 1574.395303] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1574.395305] usb 3-3: Product: 802.11 n WLAN
[ 1574.395307] usb 3-3: Manufacturer: Ralink
[ 1574.395308] usb 3-3: SerialNumber: 1.0
[ 1574.562363] usb 3-3: reset high-speed USB device number 20 using xhci_hcd
[ 1574.757221] ieee80211 phy275: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 1574.767204] ieee80211 phy275: rt2x00_set_rf: Info - RF chipset 0008 detected
[ 1574.767470] ieee80211 phy275: Selected rate control algorithm 'minstrel_ht'
[ 1575.078511] usb 3-3: USB disconnect, device number 20
[ 1575.394164] usb 3-3: new high-speed USB device number 21 using xhci_hcd


Kod Seç Genişlet

$ dmesg | tail
[ 1660.906252] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1660.906253] usb 3-3: Product: 802.11 n WLAN
[ 1660.906255] usb 3-3: Manufacturer: Ralink
[ 1660.906256] usb 3-3: SerialNumber: 1.0
[ 1661.073299] usb 3-3: reset high-speed USB device number 64 using xhci_hcd
[ 1666.129337] ieee80211 phy301: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[ 1666.129342] ieee80211 phy301: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[ 1666.129345] ieee80211 phy301: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 1666.129522] usb 3-3: USB disconnect, device number 64
[ 1666.377311] usb 3-3: new high-speed USB device number 65 using xhci_hcd



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Aralık 2016 - 22:22:02
Tekrardan teşekkür ederim yardımlarınızı bekliyorum 

[if]

@ EruimdaS, daha üst sürüm bir çekirdekle denediniz mi?

[EruimdaS]

Hayır hocam denemedim, nasıl üst çekirdekle deneyeceğimi anlatabilir misiniz?  [mention=612259]@if[/mention]

[if]

Kod Seç Genişlet


cd ~/İndirilenler
mkdir çekirdek
cd çekirdek
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-headers-4.8.11-040811-generic_4.8.11-040811.201611260431_amd64.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-headers-4.8.11-040811_4.8.11-040811.201611260431_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8.11/linux-image-4.8.11-040811-generic_4.8.11-040811.201611260431_amd64.deb
sudo dpkg -i *.deb


komutları ardından sistemi yeniden başlatıp dener misiniz?

[EruimdaS]

Maalesef hocam, device not managed olarak devam ediyor yine. Adaptörün kartından kaynaklanan bir sorun olma ihtimali nedir sizce? [mention=612458]@if[/mention]

[if]

Olabilir @EruimdaS.

Aygıt şu:

Kod Seç Genişlet


New USB device found, idVendor=148f, idProduct=3072

148f Ralink firmasını; 3072 aygıtı işaret ediyor.

Bilgisayardaki diğer USB girişleriyle de dener misiniz?

Kimileri ehci_hcd sürücüsünü kara listeye almayı önermiş. Güç alımında sıkıntı yaşayabileceği söyleniyor.

https://paulphilippov.com/articles/how-to-fix-device-not-accepting-address-error

error fetching interface information: Device not found  ralink
reset high-speed USB device number 58 using xhci_hcd
Device not responding to setup address.
device not accepting address 63, error -71